C/O road from Garappa Mod Bagru Basnur to Pohada km.0/000 to 3/550 in Distt. Kangra (HP) under NABARD RIDF-XXVI

Amount

Excavation in hilly area in all heights and depths and in all kind of soil by manual/ mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rock, chiseling wedging out rock (where blasting is prohibited) and their intermediate classification of soil, setting out true to the required lines, grades, width cutting and trimming of side slopes and level as shown in the drawing and as directed by Engineer-in-Charge at site according to the MORD technical specification section 300 and 1600 and sorting out useful materials and stacking the same with in all leads and lifts in acquired width of road and transporation of unuseful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material to the approved dumping sites through all modes of transportations including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and incidentals, necessary to complete the work by mechanical means /labour if required. All useful material such as stones shingle, aggregate and slates etectra shall be sorted out and stacked in proper stack. Recovery of stone to the tune of 323.29 Cubic metre quantity at the rate of Rs.300/-(Rupees Three hundred)only per cubic metre shall be effected from the contractors running bills on pro-rata basis as per actual quantity executed. Any loss to the public, private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all cases. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Construction of embankment with approved materials deposited at site from road way cutting and excavation from drains and foundation of all other structure or other source graded and compacted in 200mm (Two hundred milimetre) thickness with three Wheel Roller 80-100 (eighty- hundred) kN static weight roller to meet the requirement of tables 300.1 and 300.2 as per MORD technical specification section 300, 1600 and as per direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Earth work in excavaxtion for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock, chiseling/ wedging out rocks (where blasting is prohibited) as per drawings and MORD technical specification section 300 and 1600 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetres) compacted thickness including shoring, strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantam of water including cleaning of slush which any arrise out during dewatering as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST and other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (One cement isto Four Sand isto Eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size and curing complete including the cost of form work on ground or under water complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths in retaining walls and breast walls etcetra as per drawing and M.O.R.D. Technical Specification section 800, 900 and 1200, as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Back filling with granular material behind abutments, return walls, wing walls and retaining walls complete as per drawing and M.O.R.D. Technical specification Section 1200 and 1600, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing 100mm (One hundred milimetre) diametre Poly Vinyl chloride pipe weep holes in brick masonry/stone masonry/plain reinforced concrete abutment, wing walls, return wall and retaining walls/breast walls etcetra extending through the full width of the structure with slope of 1(V):20(H) (One vertical isto twenty horizental) towards draining face complete as per drawing and MORD Technical specification section 700 and 1200, including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in open foundation for all type of structure complete using plain cement concrete nominal mix 1:3:6 (One cement isto Three Sand isto Six graded crushed stone aggregate 40mm (Forty milimetre) nominal size) on ground or under water and curing complete including pumping or bailing out water, dewatering including removal of slush which may arise at the time of laying concrete for all heights/ depths including the cost of form work as per drawing and MORD technical specification section 800, 900 and 1200 as per the direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in sub structure grade M-15 (M-Fifteen) with minimum cement contents of 275 kgs (Two hundred seventy five kilogram) per cubic metre graded crushed stone aggregate 40mm (Forty milimetre) nominal size) and curing complete for all heights/ depths including the cost of form work in abutments and Toe walls etcetra as per drawings and MORD technical specification Section 800, 900 and 1200 as per the direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying rubble stone flooring in cement mortar 1:3 (One cement isto Three Sand) laid over cement concrete bedding inclusive of its cost complete as per drawing and M.O.R.D. technical specifications section 1300 and curing complete as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated, reinforced concrete in sub-structure of all type of structure complete using reinforced cement concrete grade M-20 (M-Twenty) design mix with cement contents not less than 330 kg. (Three hundred thirty kilogram) per cubic metre with 20mm (Twenty milimetre) nominal size graded crushed stone aggregate and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in Bed Blocks, dirt wall and retaining wall etcetra as per drawing and MORD technical specification section 800, 900 and 1200 and as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated, plain cement concrete grade M-20 (M-Twenty) design mix with cement contents not less than 330 kg. (Three hundred thirty kilogram) per cubic metre with 40mm Forty milimetre) nominal size graded crushed stone aggregate and curing complete including the cost of form work in abutments etcetra as per drawing and MORD technical specification section 800, 900 and 1200 and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete of Grade M-25 (M-Twenty five) design mix with cement contents not less than of 400 (Four hundred) Kilogram per cubic metre with 20mm (Twenty milimetre) nominal size graded crushed stone aggregate in super-structure as per drawing and MORD technical specification section 800, 900 and 1400 and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in deck slab including hauling of material in all kinds of leads, lifts and other incidental as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and MORD technical specifications section 1000 and 1400 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per the direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other inciddental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying, fitting and placing HYSD bar reinforcement (FE-415) in sub-structure complete as per drawing and MORD technical specifications section 1000 and 1200 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per the direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other inciddental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in cradle bedding of plain cement concrete grade M-15 (M-Fifteen) with minimum cement contents not less than 275 kgs. (Two hundred seventy five kilogram) per cubic metre graded crushed stone aggregate 40mm (Forty millimetre) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering and removal of slush which may arise at the time of laying concrete complete in all height/ depth including cost of form work as per drawing and MORD specification section 800, 900 and 1100, including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete of Grade M-30 (M-Thirty) design mix with minimum cement content not less than 430 kg (Four hundred thirty Kilogramme) per cubic metre with 20mm (Twenty milimetre) nominal size graded crushed stone aggregate in wearing coat as per drawing and MORD technical specification Section 800, 900, 1000 and 1400 including cost of reinforcement, form work and curing complete including carriagem of material within all leads, lifts and as per the direction of Engineer-in-Charge. The rate including Octroi, royality, Malkana, Toll Tax, GST or other taxes imposed by the Government.

Filling in foundation trenches as per drawing and MORD technical specification section 300 earth filling as per the direction of Engineer-in-Charge including cairrage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying (to level or slope) 900mm dia (Nine hundred milimetre) diametre reinforced cement concrete heavy duty non pressure pipes IS Class NP-3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (One cement isto Two Sand) but excluding the cost of excavation, protection works, back filling, concrete and masonry work in head walls and parapets as per drawing and MORD technical specifications section 1100 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing drainage spouts complete with 100mm(one hundred millimetre) dia galvanizes mild steel down pipe corrosion resistant structural steel grating complete as per drawing and MORD technical specifications section 1400 including hauling of materials in all leads,lifts and other incidental as per the entire satisfaction and directions of Engineer-in-Charge . The rate including octroi,royality,Malkana,toll tax GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-25 (M-Twenty five) design mix having cement contents not less than 400 kg (Four hundred Kilogramme) per cubic metre with 20mm (Twenty milimetre) nominal size graded crushed stone aggregate and curing complete in approach slab including reinforcement for reinforced concrete work and form work as per drawing and M.O.R.D. Technical specification section 800, 900, 1000 and 1400 as per the directionof Engineerin-charge. The rate including octroi,royality,Malkana,toll tax GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete grade M-15(M-fifteen) nominal mix 1:2½:5 (one cement: two & half sand: five graded crushed/broken stone aggregate 40mm (forty miilimetre) nomianl size) below approach slab as per drawings and MORD technical specifications section 800, 900 and 1200 including the cost of form work curing complete including hauling of materials in all leads lifts and other incidential as per the entire satisfaction and directions of Engineer-in-Charge. The rate including octroi,royality,Malkana,Tol tax, GST or other taxes imposed by the Government.

Loosening of the ground upto a level of 300mm (Three hundred millimetre) below the sub grade level, watered, graded with motor grader and compacted in layers to meet requirement of Table 300.1 and 300.2 with three wheel 80-100 (eighty to hundred) kN static roller for sub grade construction as per M.O.R.D. technical specification section 300 and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits within all leads and lifts, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 360.2 as per MORD Technical Specification section 300 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Construction of granular sub base by providing well graded material spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100 (Eighty to Hundred) kN static roller to achieve the desired density complete as per drawing and MORD Technical Specification Section 400 for grading-I material as per the entire satisfaction and direction of Engineer-in-Charge including carriage of material within all leads, lift and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing, laying spreading and compacting by mechanical means stone aggregagte size 63mm to 45mm (Sixty three millimetre to forty five millimetre) Grading-II (75mm (Seventy five millimetre) consolidated thickness) to water bound macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (Eighty to Hundred)kN static roller in stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (Eleven point two millimetre) nominal size at the rate of 0.20 (Zero point two zero cubic metres) per ten square metre and binding material at the rate 0.06 (Zero point zero six cubic metre) per ten square metre to fill up the interstices of coarse aggregagte, watering and compacting to the required density as per MORD technical specification Section 400 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing, laying spreading and compacting by mechanically means stone aggregate size 53mm to 22.4mm (Fifty three millimetre to Twenty two point four millimetre) Grading-III (75mm (Seventy five millimetre) consolidated thickness) to water bound macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (Eighty to Hundred)kN static roller in stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (Eleven point two millimetre) nominal size at the rate of 0.18 (Zero point one eight cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD technical specification Section 400 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying primer coat with Bitumen emulsion (SS-I) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer at the rate of 0.85 kg. Per Sqm (Zero point eight five kilogram per square metre) using mechanical means as per MORD technical specification section 500 including carriage of material within all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying tack coat with Bitumen emulsion (RS-I) on the granular surface treated with primer and cleaned with hydraulic brooms and spraying primer @ 0.275 kg per sqm. (Zero point two seven five kilogram per square metre) using mechanical means as per MORD technical specification section 500 including carriage of material within all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying tack coat with Bitumen emulsion (RS-I) on the prepared bituminous surface cleaned with hydraulic brooms and spraying primer @ 0.225 kg. (zero point two two five kilogram) per square metre using mechanical means as per MORD technical specifications section 500 including carriage of material within all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government time to time.

Providing and laying 30mm (Thirty milimetre) compacted thickness bituminous concrete with minimum 100-120 (One hundred to One hundred twenty) TPH hot mix batch type plant with electronic control grading II using crushed aggregate 13.2mm (Thirteen decimal two milimetre) nominal size of specified grading premixed with bituminous binder VG-10 (Viscosity grade ten) at the rate of 5.40 to 5.60 (Five decimal four zero to Five decimal six zero) percent of mix weighting transport to site laid with Censor paver finisher hydraulic with censor control to the required grade level and alignment over a previously prepared surface and rolling complete with smooth Three wheel Roller 8-10 (Eight to Ten) tonne capacity or Pneumetic type Roller of 12-15 (Twelve to Fifteen) tonne with tyre pressure of atleast 0.56 (Zero decimal five six) MPA for intrmediate rolling and finish rolling with 6-8 (Six to Eight) tonne smooth wheeled tandom roller to achieve the desired compaction as per MoRTH Technical Specification section 500 as per the direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government time to time.

Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement thickness as per design, over a prepared sub base with 43 (forty three) grade cement M-30 (M-Thirty) grade, coarse and fine aggregate confirming to ISI :383 maximum size of coarse aggregate not exceeding 25mm (Twenty five millimetre) mixed in a concrete mixer of not less than 0.2 cum (Zero point Two) cubic metre capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel) laying and fixing of 125 micron (One hundred twenty five micron) thick polythene film wedges, steel plates including levelling the form work as per drawing, spreading, the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars near approaches to bridge/culvert and construction joints, admixture as approved curing of concrete slab, for 14 days using curing compound (where specified) and water finishing to lines and grade as per drawing and M.O.R.D. technical specification section 1500 including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete nominal mix 1:3:6 (One cement isto Three Sand isto Six graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush which may arise at the time of laying concrete including cost of form work in drains as per drawing and MORD Technical Specification section 800,900 and 1200 including carriage of material/ machinery required to execute the work in all leads,lifts and other incidentals. The rate is including Octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing Reinforced cement concrete M-15 (M-fifteen) grade Ordinary Kilometer Stone (Precast) of standard design as per IRC :8 (eight) fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals, labour and equipment required to execute the work to the site of work complete in all respect. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Reinforced cement concrete M-15 (M-fifteen) grade 200m (two hundred metre) Stone (Precast) of standard design as per IRC :8 (eight) fixing in position including painting and printing etcetera as per drawing and technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals, labour and equipment required to execute the work to the site of work complete in all respect. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing of Semi-reflective cautionary, mandatory and informatory sign board 600mm (six hundred millimetre) equilateral triangle as per IRC-67 made of 1.5 mm (one point five millimetre) thick MS-sheets duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65 mm (sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per section 1700 of MORD specifications of required shade and colour supported and welded on 47mm x 47mm of 12 SWG ( forty seven into forty seven millimetre of twelve Standard Wire Gauge) sheet square tube firmly fixed to the ground by mean of properly designed foundation with M-15 grade ( M-fifteen grade) cement concrete 450mm x 450 mm x 600 mm ( four hundred fifty into four hundred fifty into six hundred millimetre), 600 mm ( six hundred millimetre) below ground level as per drawings and MORD Technical Specification section 1700 including painting angle iron post with primer and two post of Epoxy paint as per specification and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and erecting direction and place identification semi-reflective sign boards upto 0.90 sqm (zero point nine zero square metre) size board, as per IRC-67 made of 2.0mm (two point zero millimeter) thick MS sheets duly stove enamelled paint in white colour in front and gray colour on back with red reflective border of 70mm (seventy millimetre) width and required message, letters and figures with reflective tape engineering grade as per section 1700 of MORD specifications of required shade and colour supported and welded on 47mm x 47mm of 12 SWG (forty seven into forty seven millimetre of tewlve standard wire gauge) sheet square tube of 3050mm (three thousand fifty millimetre) height duly strengthened by 25mm x 5mm (twenty five millimetre into five millimetre) mild steel flat iron on edges on back firmly fixed to the ground by mean of properly designed foundation with M-15 grade (M-fifteen grade) cement concrete 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeter) , 600mm ( six hundred millimeter) below ground level as per approved drawings and MORD technical specification section 1700, including painting angle iron post with primer and two coats of Epoxy paint as per specification and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and erecting direction and place identification semi-reflective sign boards more than 0.90 sqm (zero point nine zero) size board, as per IRC-67 made of 2.0mm (two point zero millimeter) thick MS sheets duly stove enamelled paint in white colour in front and gray colour on back with red reflective border of 70mm (seventy millimetre) width and required message, letters and figures with reflective tape engineering grade as per section 1700 of MORD specifications for rural roads of required shade and colour supported and welded on 47mm x 47mm of 12 SWG (forty seven into forty seven millimetre of tewlve standard wire gauge) sheet square tube of 3050mm (three thousand fifty millimetre) height duly strengthened by 25mm x 5mm (twenty five millimetre into five millimetre) mild steel flat iron on edges on back firmly fixed to the ground by mean of properly designed foundation with M-15 grade (M-fifteen grade) cement concrete 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeter) , 600mm ( six hundred millimeter) below ground level as per approved drawings and MORD technical specification section 1700 (Maintenance Board), including painting angle iron post with primer and two coats of Epoxy paint as per specification and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Guard stones on curves made of reinforced/ local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and MORD technical specification section 1700 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Routine maintenance works for five years

For 1st Year

For 2nd Year

For 3rd Year

For 4th Year

For 5th Year

Rohit

Gandharav Singh

Navneet Thakur

MCC POWER PROJECTS PVT. LTD.