CSR PROGRAMME OF APTRANSCO

Volley Ball Courts (2 Nos) – site clearance, levelling, murram/sand base with GSB, fine-sand surface, RCC pedestals, 4.9 m MS pipe fencing and volleyball poles

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. By Mechanical Means

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Forming embankment with Murram by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Forming embankment with Murram 60%, Sand-30%, Clay Soil-10% by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Construction of Granular sub-base by providing HBG material confirming to Grading - V of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Supplying and fixing 4.9m high fencing with Vertical MS Hallow Pipe -80mmx80mm - 3.2mm thk at 3m centre to centre with 0.4m embeded in concrete pedestals and Horizontal on the top and center of the vertical post of MS Hallow Pipe -50mmx50mm - 2mm thk . Corner, end and every 10th post to be strutted. Fixing Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge to posts using flats of size 150mm x 6mm and bolts etc., as per approved drawing, including cost of bolts and brackets, fabrication and erection in position, cost and conveyance of all materials to work site etc., all operational, incidental labour charges, power charges, overheads & contractors profit etc. complete for finished item of work

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Supply, installation and fixing of tournament-grade (FIVB-pattern) fixed volleyball post – per post (each). Post made of 100 mm OD heavy-wall hot-dip galvanised MS tube (min. 4 mm wall) with epoxy/polyurethane powder-coated finish, 2.55 m above ground, height-adjustable for men / women / junior play (2.43 / 2.24 / 2.00 m) with calibrated height markings; integral stainless-steel gear-box ratchet winch with crank handle for net tensioning and nylon/steel rope pulleys; 300 mm dia x 900 mm deep galvanised ground sleeve with lockable cap set in M20 cement concrete footing; 50 mm thick high-density foam protective padding with weather-proof PVC cover; including share of Garware tournament-quality net with Kevlar/steel top cable, side bands and antennae per court, complete with all hardware, transport, installation, testing and overheads & contractor's profit, as directed by the Engineer-in-Charge.

Cricket Net Practice – PCC base (2 Nets) – site clearance, levelling, gravel GSB, PCC pitch base, RCC pedestals and MS tubular frame with nylon net

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. By Mechanical Means

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Providing Granular sub-base / base course with Gravel materials (Table 400.13) by mix in place method for the base of Cricket Net Practice pitch & run-up area, including profile correction and filling of low-lying areas – spreading approved local gravel in uniform layers over the prepared (scarified & compacted) sub-grade, mixing by mix in place method and compacting with smooth wheel roller at OMC to achieve the desired density, finishing to required camber/levels to receive PCC base / turf, complete as per Clause 401.4 & Technical Specification Clause 408 MoRD / MoRTH, including cost of all labour charges, hire charges of machinery, fuel charges, wages of driver and other incidental charges etc., complete as per SS and as directed by the departmental officer in charge of work.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

supply and installation of nylon fencing using a Nylon Net with a mesh size of 2 inches x 2 inches and a thickness of 2.5mm, ensuring durability and strength. For cricket netting, the mesh size will be 40mm x 40mm with a thickness of 2.5mm, specifically designed for optimal performance and safety. Additionally, the nylon net will be UV-resistant and sourced from Garware

Cricket Net Practice – Synthetic Turf (2 Nets) – site clearance, levelling, gravel GSB, PCC base, RCC pedestals, MS frame, synthetic turf and nylon net

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. By Mechanical Means

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Providing Granular sub-base / base course with Gravel materials (Table 400.13) by mix in place method for the base of Cricket Net Practice pitch & run-up area, including profile correction and filling of low-lying areas – spreading approved local gravel in uniform layers over the prepared (scarified & compacted) sub-grade, mixing by mix in place method and compacting with smooth wheel roller at OMC to achieve the desired density, finishing to required camber/levels to receive PCC base / turf, complete as per Clause 401.4 & Technical Specification Clause 408 MoRD / MoRTH, including cost of all labour charges, hire charges of machinery, fuel charges, wages of driver and other incidental charges etc., complete as per SS and as directed by the departmental officer in charge of work.

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX

Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Supply and laying of 3/8" tufted synthetic grass (artificial turf) of 35 mm pile height, fibre colour 4 field green + 4 olive green, root zone 4 jute + 4 field green with covering of 14 stitches per 10 cm with double backing UV stable, 215 gram/sq.m, coated with black SBR latex, fibres meeting stringent environmental standards, laid over the prepared PCC base of the cricket net practice pitch, including cost of material, transportation to the site, labour charges etc., complete for finished item of work.

supply and installation of nylon fencing using a Nylon Net with a mesh size of 2 inches x 2 inches and a thickness of 2.5mm, ensuring durability and strength. For cricket netting, the mesh size will be 40mm x 40mm with a thickness of 2.5mm, specifically designed for optimal performance and safety. Additionally, the nylon net will be UV-resistant and sourced from Garware

Pathways & Site Development – site clearance, levelling, playground filling (murram/GSB), murram pathway and CC paver pathway with kerbs

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. By Mechanical Means

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Construction of Granular sub-base by providing HBG material confirming to Grading - V of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.

Forming embankment with Murram by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Forming embankment with Murram 60%, Sand-30%, Clay Soil-10% by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Filling with carted gravel in pathways, trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for finished item of work (APSS NO.309&310)

Vibrated Plain Cement Concrete (1:3:6) nominal mix using 220 kg of cement and 20mm graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., and including all charges for Concrete Mixer, machine mixing, laying concrete in position, vibrating, curing, overheads & contractors profit etc., for finished item of work (APSS No. 402)

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH

Supply of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer’s specifications set over the 50 mm thick sand bed with hand roller compaction with joint neatly in homogeneous or heterogeneous pattern as the colour and pattern shall be as per the drawings furnished by the architect, including cost and conveyance of all materials like cement, sand, water, tiles, etc., to site including all operational, incidental, labour charges, laying tiles to required slope as directed by the Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.

Supply & application of two coats of acrylic exterior emulsion paint having VOC content less than 50 grams/litre, of shade approved by the Engineer-in-Charge to give an even shade, after thoroughly brushing the surface to remove all dirt and loose powdered materials, including cost and conveyance of all materials to site, operational, incidental, labour charges, overheads & contractors profit complete for finished item of work.

Underground Clear Water Sump – excavation, anti-termite, PCC bed, RCC M25 raft, walls & slab with steel, internal plastering

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge..

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

RCC M 25 Design mix corresponding to table 9 of IS 456 using 20 mm graded machine hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc to site and including hire charges and labour charges for centering, shuttering, machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work complete as per SS and as directed by the departmental officer in charge of the work. But excluding seignorage charges.

Rcc Wall 200mm Thk

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Septic Tank (two chambers with RCC baffle walls) – excavation, anti-termite, PCC bed, RCC M25 raft, walls & cover slab, plastering

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

RCC M 25 Design mix corresponding to table 9 of IS 456 using 20 mm graded machine hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc to site and including hire charges and labour charges for centering, shuttering, machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work complete as per SS and as directed by the departmental officer in charge of the work. But excluding seignorage charges.

Rcc Wall 200mm Thk

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Plastering 12mm thick for internal walls using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Public Toilet Blocks – Male & Female with child-feeding room (2 Nos) – RCC frame, flyash masonry, plastering, waterproofing, tiling, doors and painting

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Filling with carted gravel in pathways, trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for finished item of work (APSS NO.309&310)

Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge..

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

RCC M 25 Design mix corresponding to table 9 of IS 456 using 20 mm graded machine hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc to site and including hire charges and labour charges for centering, shuttering, machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work complete as per SS and as directed by the departmental officer in charge of the work. But excluding seignorage charges.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Masonry work in CM (1:6) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Masonry work in CM (1:6) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Reinforced Masonry for partition walls (150 mm thick) in CM (1:6) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., but excluding cost of steel and its fabrication charges complete for finished item of work.

Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Flooring with Non Skid Ceramic tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish (BMT-C.01), set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand, water and tiles etc., seigniorage charges, etc., complete for finished item of work. (BLD-CSTN-7-6)

Dadoing to walls with first quality decorated coloured background glazed tiles of size 200mm x 300mm of approved colour set over base coat of C.M (1:3) prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3 Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials, labour charges, water to work site, seigniorage and all operational, incidental, mixing mortar, fixing in position, lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work. (BLD-CSTN-7.20)

Flooring with 18 to 20 mm thick Anti - skid Granite (Black) 18-20 mm thick upto 2.43 M (For Stair case) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and overheads & contractors profit complete for finished item of work.

Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same and over heads &contractor profit etc.

Providing and applying wall putty of white cement / polymer / cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing to remove dirt and loose powder, applying emery paper, sanding, cleaning, applying knifing paste filler by putty knife / muslin pad, air drying and sanding with 180 & 320 No. emery paper, including cost and conveyance of all materials, labour, overheads & contractors profit complete for finished item of work.

Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Providing and applying wall putty of white cement / polymer / cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing to remove dirt and loose powder, applying emery paper, sanding, cleaning, applying knifing paste filler by putty knife / muslin pad, air drying and sanding with 180 & 320 No. emery paper, including cost and conveyance of all materials, labour, overheads & contractors profit complete for finished item of work.

Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 gauge M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm (5mm+5mm) thick PVC sheet fitted in the M.S. frame welded / sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, with 6 Nos M.S. Z-type hold fasts, 3 Nos 'T' / butt hinges per leaf, complete as per direction of Engineer–in–charge and manufacturers specification. (SoR 2026-27, BMT-N.51)

SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT): Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19gauge. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-in-charge.

Supplying and fixing of Fixed Louvered Ventilators made of pre -painted steel(base steel as per IS 513 of -0.58 mm thick'D"quality,galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick,finish painted with a polyester paint of 12-16 microns thick and back coated with 57 microns thick alkyd backer,The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pin head glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket. corner brackets made of CRCA with Zinc Phosphate.The frames to be fixed to the concrete /masonry wall by means of self expanding screws including10mm square guard bars with 6"pitch complete for finished itemofwork. Ventilators:Fixed louvers 4'-0"x2'0"(1219.2 x 609.6 mm) (Box section) outer frame section size of 33x56mm Mullion section size of 33x56mm

supply and installation of High Pressure Laminate (HPL) toilet cubicles using 12mm thick panels, made from phenolic resins under high pressure. These panels have a density greater than 1.40 kg/cm³, water absorption below 0.60–0.8%, and are resistant to heat, bacteria, chemicals, scratches, and impacts, meeting IS-2046 and EN438 standards. Each cubicle will be 1200mm (W) x 1500mm (D) x 2000mm (H) with door size of 600mm (W) x 1800mm (H). Urinal Modesty Panels (UMP’s) will also be installed, each measuring 500mm (W) x 900mm (H). SS/Nylon hardware accessories include auto return hinges (3 per door), indicator lock, door knob, coat hook, adjustable legs, and anodized aluminum U, L, H profiles with a top rail. Installation includes adjustable feet with 150mm floor clearance and secure fixing using aluminum U-channels, top rails, and wall fixings.

Retrofitting of Existing Building – dismantling & scraping, repairs, re-plastering, roof waterproofing, flooring & dado, doors/windows, roofing and painting

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH

Dismantling Steel Work in all Types of Sections upto a height of 5 m above Plinth Level excluding Cutting of rivet as per Technical Specification Clause 202 MORD / MORTH including stacking of dismantled material with all lifts and lead upto 1000 m.

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them within 100 metre lead.

Through scraping of old plastered surface disposal of unserviceable materials within 100 metres lead. complete fininsh of item of work

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Filling with carted gravel in pathways, trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for finished item of work (APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Masonry work in CM (1:6) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Flooring with Non Skid Ceramic tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish (BMT-C.01), set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand, water and tiles etc., seigniorage charges, etc., complete for finished item of work. (BLD-CSTN-7-6)

Dadoing to walls with first quality decorated coloured background glazed tiles of size 200mm x 300mm of approved colour set over base coat of C.M (1:3) prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3 Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials, labour charges, water to work site, seigniorage and all operational, incidental, mixing mortar, fixing in position, lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work. (BLD-CSTN-7.20)

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)

Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush on line with plastering.

Flooring with 18 to 20 mm thick Anti - skid Granite (Black) 18-20 mm thick upto 2.43 M (For Stair case) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and overheads & contractors profit complete for finished item of work.

Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same and over heads &contractor profit etc.

Providing and applying wall putty of white cement / polymer / cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing to remove dirt and loose powder, applying emery paper, sanding, cleaning, applying knifing paste filler by putty knife / muslin pad, air drying and sanding with 180 & 320 No. emery paper, including cost and conveyance of all materials, labour, overheads & contractors profit complete for finished item of work.

Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Providing and applying wall putty of white cement / polymer / cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing to remove dirt and loose powder, applying emery paper, sanding, cleaning, applying knifing paste filler by putty knife / muslin pad, air drying and sanding with 180 & 320 No. emery paper, including cost and conveyance of all materials, labour, overheads & contractors profit complete for finished item of work.

Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Supply and fabrication of heavy steel works like trusses, stanchions, heavy beams & girders using MS structural steel angles / channels / I-sections as per IS 808, including cost of welding rods, power charges, labour charges for cutting, placing, welding and erecting in position and fixing using chain pulley blocks, derrick pole arrangements and cranes, cost & conveyance of all materials including wastage to site, complete for finished item of work.

Supply,fabricating and providing Roofing with prepainted galvalume trapezoidal profile roofing sheets with 0.5mm thickness, coating: Alu zinc coating AZ150 GSM tensile strength 550MPA paint coating regular modified polister painting. Painting thickness (top):8x20 microns, (bottom) 5 to 7 microns, sheet width 1.020 , length: maximum 12mts with regular range colours fixed with GI 'J' bolts and nuts 8mm dia complete excluding the cost of purlins , rafters, truses and cost and conveyence of all materials and labour charges for all operations etc., complete for finished item of work

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast.Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 35 mmthick conforming to IS:2202 with Bothsides Laminate Sheets - Mat Finish: 1 mm thick as per drawing including cost of Stainless Steel fixtures such as 6 Nos. Butt hinges 150mm long, 2 No tower bolt of 300x10mm dia, 1 No. Heavy duty mortise lock 6/7 levers (IS:2209) with PC or CP handles complete set, 2 No.s Vision panel - 200x1200mm toughened glass -12mm thk, 4 Nos. handles of 200 mm size & 2 Nos. Heavy duty door stoppers and 2 nos. rubber bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.0 X 2.1m)

Supplying and fixing of Fixed Louvered Ventilators made of pre -painted steel(base steel as per IS 513 of -0.58 mm thick'D"quality,galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick,finish painted with a polyester paint of 12-16 microns thick and back coated with 57 microns thick alkyd backer,The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pin head glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket. corner brackets made of CRCA with Zinc Phosphate.The frames to be fixed to the concrete /masonry wall by means of self expanding screws including10mm square guard bars with 6"pitch complete for finished itemofwork. Ventilators:Fixedlouvers4'-0"x2'0"(1219.2 x 609.6 mm) (Box section) outer frame section size of 33x56mm Mullion section size of 33x56mm

Providing and fixing factory made uPVC any colour casement/casementcum fixed glazed windows comprising of uPVC multichambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame47 x 50mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window up to 2.50 sqm).

Street Furniture – granite stone benches (8 Nos), SS twin dustbins (8 Nos) and MS signages on PCC foundations

Supply & Fixing Sadarahalli granite stone with 5 line dressing Double Patti of 5' length seating benches with back rest, width 16", 4" thick and 18" height, leg size 4" width, including cost and conveyance of all materials, loading, unloading, transport and all operational, incidental labour & lift charges, overheads & contractor's profit, complete for finished item of work.

Supply and fixing of Pole-Mounted Stainless Steel Dual Dustbin: twin cylindrical bins (60 litres per bin) mounted side-by-side between sturdy vertical stainless steel poles with square base plates bolted into concrete/ground; brushed/matte or polished stainless steel finish with perforated (square cut-out) pattern for ventilation; open top for touch-free disposal with swinging mechanism to tilt bins for emptying; rust-resistant, anti-corrosive, suitable for heavy outdoor public use, complete.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Toilet Blocks – Internal Electrification (2 Nos) – conduits, point wiring, switches & sockets, DBs with MCBs, LED fittings and fans

Supply and laying of following size ISI …….. outer dia medium grade with IS:9537 part 3 FRLS regid PVC pipe, concealed in wall with PVC deep Junction Boxes confirms to IS : 3419, PVC Bends including required accessories complete. Makes : Precision/Universal&Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab /Anchor/ Polyline/ Orbit/ AKG/Beljin

25mm (2.20 mm thickness)

32mm (2.10 mm thickness)

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box and front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Primary Light Point)

Secondary Light Point Supply and fixing of ceiling rose for secondary light point (conduit and wire is extra) complete

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box a nd front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Fan Point)

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of switches/sockets:- Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)

Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board including giving all connections and all labour charges etc., complete. Makes: Legrand / Schneider / Crabtree / L&T-englaze / GM / Goldmedal / Million / Anchor / Precision / Honeywell (Model Data 2026-27, SoR 2.1.4)

Supply and Fixing of 16A 2Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ] Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Supply and run of 1 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 1 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 56/0.3mm (4.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 2 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and fixing of distribution board Protection suitable for IP43, S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way SPN Distribution board 40A DP MCB 10KA 1 Nos as incomer and 8Nos 6-32A SP MCB's 10KA as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 4way TPN Distribution board 63A 4P MCB 1Nos as incomer and 12Nos 6-32A SP MCB's as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way TPN Distribution board 63A 4P MCB 1Nos as incomer and 24Nos 6-32A SP MCB's as outgoers

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I. a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight.

Supply of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser with IP 65 Protection etc., complete., Makes : Philips/Bajaj / Crompton / Surya / Havells / Greenlites/ Insta Power/HPL /Halonix/ Panasonic.

Supply and Transportation of 36W, 2' x2' (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete with 5 years warranty. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready / FortuneArrt// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Supply ,installation testing comissioning of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200cubic meter/min but without Regulator. Makes : Crompton / Bajaj Kassels 50 / Usha atom

Supply of 12" (300mm) Light duty exhaust fan with metallic blades and wire guard etc complete Makes: Crompton / Almounard / Havells Ventil Air-DB – including labour charges for fixing of exhaust fan in wall with necessary connections and masonry work (HAM Office Building L516 ₹900.92)

Existing Building – Internal Electrification – conduits, point wiring, switches & sockets, DBs with MCBs, LED fittings and fans

Supply and laying of following size ISI …….. outer dia medium grade with IS:9537 part 3 FRLS regid PVC pipe,concealed in wall with PVC deep Junction Boxes confirms to IS : 3419, PVC Bends including required accessories complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/ AKG/Beljin

25mm (2.20 mm thickness)

32mm (2.10 mm thickness)

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box and front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Primary Light Point)

Secondary Light Point Supply and fixing of ceiling rose for secondary light point (conduit and wire is extra) complete

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box a nd front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Fan Point)

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of switches/sockets:- Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)

Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board including giving all connections and all labour charges etc., complete. Makes: Legrand / Schneider / Crabtree / L&T-englaze / GM / Goldmedal / Million / Anchor / Precision / Honeywell (Model Data 2026-27, SoR 2.1.4)

Supply and Fixing of 16A 2Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ] Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Supply and run of 1 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 1 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 56/0.3mm (4.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 1 of 56/0.3mm (4.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 2 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and fixing of distribution board Protection suitable for IP43, S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way SPN Distribution board 40A DP MCB 10KA 1 Nos as incomer and 8Nos 6-32A SP MCB's 10KA as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 4way TPN Distribution board 63A 4P MCB 1Nos as incomer and 12Nos 6-32A SP MCB's as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way TPN Distribution board 63A 4P MCB 1Nos as incomer and 24Nos 6-32A SP MCB's as outgoers

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I. a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight.

Supply of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser with IP 65 Protection etc., complete., Makes : Philips/Bajaj / Crompton / Surya / Havells / Greenlites/ Insta Power/HPL /Halonix/ Panasonic.

Supply and Transportation of 36W, 2' x2' (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete with 5 years warranty. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready / FortuneArrt// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Supply ,installation testing comissioning of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200cubic meter/min but without Regulator. Makes : Crompton / Bajaj Kassels 50 / Usha atom

Supply of 12" (300mm) Light duty exhaust fan with metallic blades and wire guard etc complete Makes: Crompton / Almounard / Havells Ventil Air-DB – including labour charges for fixing of exhaust fan in wall with necessary connections and masonry work (HAM Office Building L516 ₹900.92)

External Electrification – 11 kV HT line, transformer, APFC panel & feeder pillar, LT cables with terminations, ducts & crossings, earthing and safety items

Supply Transportation and unloading the RS Joist of 9.0 mtr long 175mm x 85mm size at site in good condition for H.T. / L.T. lines support including cost and conveyance of all materials and labour charges etc., complete. as per EB drawing and approval.

Supply and erection of GI stay set of dia 20mm,2.4 mtr long stay rod and anchor plate 380mmx380mmx6.4mm including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete as per EB drawing and approval.

Supply and fixing of 11KV -V- cross arms with 75x40 mm MS channel including 4 nos 50 x 50 x6 mm packing plates (9 Kgs) duly welded with necessary clamping arrangements etc., complete as per EB drawing and approval.

Supply and fixing of 11 KV danger plates on the existing poles with necessary clamping arrangements etc., complete as per EB drawing and approval.

Supply and erecting 7/2.50 AAAC / Weasel (34 Sq.mm) conductor for Overhead line with stringing, binding and suitable size of clamps for Jumpering etc., complete. as per EB drawing and approval.

Supply and erecting approved make 11KV, 5KA metal oxide lightning arrestors suitable for 11 KV supply with necessary materials on existing cross arm complete. as per EB drawing and approval.

Supply and erecting porcelain pin type insulator suitable for 11KV line with suitable hardware on existing cross arms. complete. as per EB drawing and approval.

Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., as per EB drawing and approval.

Supply and erecting 11KV, H.G (Horn Gap) fuse set including all standard accessories etc., complete with cost and conveyance of all materials and labour charges complete., as per EB drawing and approval.

LOAD BREAK SWITCH Supply, Transportation, Installation and Commissioning of 11 KV, 630A, 25 KA Outdoor type Load Break Switch as detailed below with suitable CC foundation and 2 Nos GI pipe earthing with brick masonry chambers etc., complete for finished item of work. Makes:Make:ABB/ Megawin/Amara Raja/L&T. a) Load break switch: 11KV,630A, 25 KA with fuse trip, earth switch, manually operated spring charged mechanism with 2 no + 2 NC. b) HT HRC fuse upto 63A - 3 nos. c) Bus bar connection. d) Indication lamps. e) Manual trip Push button.

Supply and Transportation of XLPE insulated IS:7098/II/85 H.T. 3C, 120Sqmm cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. [Make: Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/RR Kabel/RPG].

Supply and erecting of heat shrinkable Outdoor termination kit for 11KV XLPE HT cable 3 core 120 Sqmm with Anti Tracking red colour material,with required components, prepration of cable ends, testing etc. as etc., complete Makes: Raychem / M Seal / Denson / Multy / Transeal - Hongshang.

Supply and erecting of heat shrinkable Indoor termination kit for 11KV XLPE HT cable 3 core 120 Sqmm with Anti Tracking red colour material with required components, prepration of cable ends, testing etc. as etc., complete Makes: Raychem / M Seal / Denson / Multy / Transeal - Hongshang.

Supply, Transportation, Installation, Testing and Commissioning of 11/0.433 KV TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II) with latest ammended and as per IS 1180 Part-I : 2014 latest ammended, OCTC with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. Makes : As per list of recommended brands as category I.

APFCR Panel 80KVAR Fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard APCR panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat. Fuses shall be provided for Control purposes (All Panels shall be extendable type only). (Makes: L&T/ ABB)

FEEDER PILLAR PANEL Supply, fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat.. Fuses shall be provided for Control purposes (All Panels shall be extendable type MCCB MAKE: L&T ( DSINE), ABB(TMAX)

Supply and laying of the following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 1554-1, including laying in existing cable trench as per specifications etc complete as required. [Makes: Polycab / RPG / Finolex / Havells]

3.5 Core 240 Sqmm alluminium cable

3.5 Core 95 Sqmm alluminium cable

3.5 Core 50 Sqmm alluminium cable

3.5 Core 25 Sqmm alluminium cable

4 Core 16 Sqmm alluminium cable

4 Core 10 Sqmm alluminium cable

4 Core 6 Sqmm alluminium cable

3 Core 10 Sqmm Copper cable

3 Core 6 Sqmm Copper cable

3 Core 4 Sqmm Copper cable

Supply, laying, testing and commissioning of 3 core 2.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes: (category I) Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM/ Fortune Arrt/Anchor /Million including all labour charges etc and as directed by Engineer incharge

3 Core 1.5 Sqmm Copper cable

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI

3.5 Core 240 Sqmm alluminium cable

3.5 Core 95 Sqmm aluminium cable – with crimped Al lugs (Model Data 2026-27, SoR 4.1.10 e)

3.5 Core 50 Sqmm aluminium cable – with crimped Al lugs (Model Data 2026-27, SoR 4.1.10 c)

4 Core 16 Sqmm alluminium cable

4 Core 10 Sqmm alluminium cable

4 Core 6 Sqmm alluminium cable

3 Core 10 Sqmm Copper cable – single compression gland with crimped lugs (Model Data SoR 4.1.11 b rate)

3 Core 6 Sqmm Copper cable – single compression gland with crimped lugs (Model Data SoR 4.1.11 b rate)

3 Core 4 Sqmm Copper cable – single compression gland with crimped lugs (Model Data SoR 4.1.11 b rate)

3 Core 2.5 Sqmm Copper cable – single compression gland with crimped lugs (Model Data SoR 4.1.11 b rate)

3 Core 1.5 Sqmm Copper cable – single compression gland with crimped lugs (Model Data SoR 4.1.11 b rate)

Providing Independent earthing by excavating a trench to a depth of 2.10m in ordinary soils as specified 1.50 X 0.6 to a depth of 0.9m and 1.2 X 0.6 to a depth of 1.20m, using 40 mm dia 'B' class GI Pipe of 2.5 m long with necessary accessories with 450mm x 50 mm thick hume pipe ring duly providing staggered holes including filling with 40 kg of hard coke and 20 kg salt providing with equal proportion of in layers etc. including cost and conveyance of all materials, overheads & contractors profit etc., complete for finished item of work

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in brick masonry (CM 1:3) Chamber of 400mmx 400m x 400mm with suitable cast iron cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 0.3mtr. length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including brick masonry (CM 1:3) Chamber of size 400m x 400m x 400mm covered with suitable cast iron Slab filling with salt and charcoal giving earth connection from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).

Providing independent CI earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply,erection,testing and commissioning of following sizes of copper strip on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required.

32 x 6mm Copper strip

Supply ,erection ,testing and commissioning of following G.I. Strip/G.I. wire on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required.

25x3mm GI strip

25x6mm GI strip

Supply,erection and commisioning of cable route marker with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) of size 60cm x 60cm at the bottom and 50cm x 50cm at the top with a thickness of 10 cm including inscription duly engraved as required.

Supply, fabricating , installing structural steel supports for fixing of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting for HT yard structure and exhaust pipe supports in DG set.

Supply , laying and fixing of following RCC hume pipe NP2 class in ground complete with RCC collars, jointing with cement mortar 1:2( 1 cement : 2 fine sand) etc including labour charges etc complete as required.

300mm dia NP2 RCC Hume pipe

150mm dia NP2 RCC Hume pipe

Supply of G I Pipe 100 mm dia B Class including cost and conveyance of all materials to site, overheads & contractors profit complete for finished item of work.

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete.

Earth work excavation including all soils for trench/Pole Pit /Earth Pit/ for covering of UG cables/HDPE pipe and refilling of Trench.

Supply and providing the following materials at site including cost of all accessories and labour charges etc., complete as required.

First aid box 18"x12"x8"

Danger Board in 3 langauges English/Telugu/Hindi in red colour with 11KV marks shall comply with IS:2551-1982. 250x200mm,

Danger Board in 3 langauges English/Telugu/Hindi in red colour with 440V marks shall comply with IS:2551-1982. 250x200mm,

Shock instrution chart in English / Hindi / Telugu duly framed with front glass

Street Lighting & High Mast – 12 m high mast with LED floods, 7.5 m decorative poles with LED street lights, post-top lanterns and bulk-head fittings

Supply,fabrication ,transportation and erection of 12 Mtrs Polygon High Mast with single section of 3mm thick of bottom 360mm and top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, and GI Pipe ring suitable for fixing luminaires with LED type aviation twin lamp. Makes: As per list of recommended brands. Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes: As per list of recommended brands. Earth work excavation with an approximate quantity of 4.0 Cum for erection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erection of High Mast and carriage etc complete.

Supply, transportation and erection of 200w LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K,minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/Polycab/Keselec/HPL/Jaquar/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Supply,fabrication ,transportation and erection of 7.5 mts long with 1 Mtr length decorative Single arm bracket made with MS galvanized 40mm/50mm dia pipe and MS BOX with all accessories as per the requirements at site and as per the directions of the field engineers

Supply and fixing of 60W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 95 lm/W and junction temprature < 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection ≥ 5KV with optics istribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : WIPRO / PHILIPS (GREEN LINE) / Lighting Technologies (Adornis) / SCHREDER (BRIKA) / GE / VIN (MATRIX) / CROMPTON (HAWK) / BAJAJ (EDGE+) / HALONIX (LUMOS - SUPER) / HAVELLS (ENDURA CITYLINER NEO) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG

Supply, transportation and erection of 60w LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K,minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/Polycab/Keselec/HPL/Jaquar/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Supply and Transportation and erecting of 40W LED Post top lantern made with cast Alluminium with decorative opel polycarbonate diffuser with IP 65 protection etc., complete with all accessories Makes: Crompton LPTO-40-CDL-M/ Bajaj Celesta BGCL 40 W LED Wh/Wipro LP 02 or equivalent in Phillips/ Keselec/ Havells/ Halonix

Supply, transportation and Installation of Supply of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser. Makes : Bajaj / Crompton / Surya / VIN / Havells / Green Lights / Insta Power.

Bore Wells with Pump Sets – drilling, PVC casing & cap, HDPE rising main, 5 HP submersible pump set with cable and starter

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe ,couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely.The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,

Drilling of Bore well 350/450mm dia for insertion of pipe dia of 160/175/200 mm

Supply and Fixing of PVC Bore cap including cost and conveyance of all materials and labour charges, all operational and incidental charges and excluding all taxes etc complete.

180mm Dia Bore Cap

Slotting charges for 175 / 180mm dia PVC casing pipe excluding all taxes etc., complete.

Perforation charges for 180 mm dia PVC casing pipe excluding all taxes etc., complete.

Supply and fixing of 180mm dia 6 kgs/sqm PVC casing pipe including cost and conveyance of all materials and labour charges, overheads & contractors profit complete for finished item of work

Supply of 90mm OD PE 80 Grade material 8 kg / Cm2 ISI Mark HDPE pipe upto 600 feet Makes : Sudhakar / Reliance / Duroline / Premier / Vijaya / Godavari.

Supply and run of 3 Core 2.5 Sqmm Flat Copper cable as per IS 694:1990 for Submersible Motors. Makes: V-Guard / Gold Medal / GM / Million / Vihan/Vimal /Finecab/ CRI/ Lubi/Hitech/ Airson/Ollvin

Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T /Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes : As per list of recommended brands . Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor

Upto 7.5 HP with DOL Starter of.

Supply, Transportation and erecting of 5.00HP 25 Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha

Toilet Blocks – Sanitary & Plumbing – WCs, wash basins, urinals, CP fittings, PE tanks, CPVC water lines with valves, SWR drainage and traps

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour as directed by Engineer-in-charge.

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated complete including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying & Fixing Indian makeFlat Back Wash Hand Basin jaquar/Equavalent make 1st quality conforming to IS:2556-Part-4:1972 of 560x430x185mm ,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty 31.75mm dia PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Wall Mixer with provision for overhead shower and 115mm long bend pipe with wall flange Jaquar make Continental series, Chrome finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of 12.7 mm dia NP push cock Ist quality Jaquar Continental series, Chrome Finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Angular stopcock with wall flange Jaquar Continental series, Chrome finish with 7 years warranty. (Make: Jaquar, Model: 5053) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Double coat hook Jaquar make Continental series, Chrome finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Rack with Lower Hanger (Stainless Steel) with hook Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1581H of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Ring Round Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AQN-CHR-7721 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Grab Bar (Stainless Steel) 450mm Long Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1503 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 years warranty: Chrome plated including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Tumbler Holder for Soap Dispenser with Glass bottle Jaquar make Continental series, Chrome Finish with 7 years warranty (CAT No. AKP-CHR-35735P of Jaquar). including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for all floors.

supply and fixing of 8mm thick thougned galss partions of size 4'0''x 2'0'' with etching the glass including fixing at site for urinals including full rounding the edges fixing in poisition,including cost and conveyance of all materials and labour charges,overheads and contractors profit complete for finished item of work for all floors

Supplying and fixingTV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, etc. overhead & contractor's profit complete for finished item of work in all floors as directed by Engineer-in-charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges, overheads & contractors profit complete for finished item of work.

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326) – 160mm dia

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326) – 110mm dia

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326) – 75mm dia

Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practicefor nominal dia 75 mm (3") and grating size 100 mm dia of weight not less than 4.0 Kgs including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying, fixing, testing and commissionig of approved make PVC vent cowl with necessary accessories etc., complete.

Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification, complete for finished item of work.

Supplying, installing, testing and commissionig of R.C.C Plain end pipe NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe with all leads and lifts, making necessary connections as required etc., complete. (Provision for road crossings)

Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors

Supplying & Fixing of PVC/SWR Plain Bend of 110 mm dia

Supplying& Fixing of PVC/SWR Door Bend of 110 mm dia

Supplying & Fixing of PVC/SWR 45 degree Bend of 110 mm dia

Supplying & Fixing of PVC/SWR Single Tee of 110 mm dia.

Supplying & Fixing of PVC/SWR Single Tee with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Tee of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Tee with door of 110 mm dia

Supplying & Fixing of PVC/SWR Single Y of 110 mm dia.

Supplying & Fixing of PVC/SWR Single Y with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Y of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Y with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Coupler of 110 mm dia.

Supplying & Fixing of PVC/SWR Vent Cowl of 110 mm dia.

Supplying & Fixing of PVC/SWR Reducer of 110 dia.

Supplying & Fixing of PVC/SWR Pipe clip of 110 mm dia.

Supplying & Fixing of PVC/SWR P-Trap(big with air vent) of 110 mm dia.

Supplying & Fixing of PVC/SWR Floor-Trap(Bell mouth) of 110 mm dia.

Supplying & Fixing of PVC/SWR Plain Bend of dia 75 mm

Supplying & Fixing of PVC/SWR Door Bend of dia 75 mm

Supplying & Fixing of PVC/SWR 45 degree Bend of dia 75 mm

Supplying & Fixing of PVC/SWR Single Tee of dia 75 mm

Supplying & Fixing of PVC/SWR Single Tee with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Double Tee of dia 75 mm

Supplying & Fixing of PVC/SWR Double Tee with door of dia 75 mm

Supplying & Fixing of PVC/SWR Single Y of dia 75 mm

Supplying & Fixing of PVC/SWR Single Y with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Double Y of dia 75 mm

Supplying & Fixing of PVC/SWR Double Y with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Coupler of dia 75 mm

Supplying & Fixing of PVC/SWR Vent Cowl of dia 75 mm

Supplying & Fixing of PVC/SWR Pipe Clip of dia 75 mm

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

25 mm dia (Screwed ends)

32 mm dia (Screwed ends)

40 mm dia (Screwed ends)

Supplying, installing, testing and commissioning CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU-G/Honeywell

Supplying and lying P.C.C support blocks of 1:2:4 concrete mix of sizes as given below for pipe supports on the terrace complete.

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. for Rigid PVC rain water pipes conforming to IS 13592 - 1992 (Type A) with all fittings like shoes, bends fixed in the pipe shafts (ducts) with suitable supports etc., complete.(for RWP & balcony drainage)

Existing Building – Sanitary & Plumbing – WCs, wash basins, urinals, CP fittings, PE tank, CPVC water lines with valves, SWR drainage and traps

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap, supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated complete including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks, 1 No.12.70mm PVC connection with brass union nuts CP coated, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges, overheads & contractors profit for finished item of work.

Supply & Fixing of 12.7 mm dia NP push cock Ist quality Jaquar Continental series, Chrome Finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Angular stopcock with wall flange Jaquar Continental series, Chrome finish with 7 years warranty. (Make: Jaquar, Model: 5053) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Double coat hook Jaquar make Continental series, Chrome finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Rack with Lower Hanger (Stainless Steel) with hook Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1581H of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Ring Round Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AQN-CHR-7721 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Grab Bar (Stainless Steel) 450mm Long Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1503 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 years warranty: Chrome plated including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Tumbler Holder for Soap Dispenser with Glass bottle Jaquar make Continental series, Chrome Finish with 7 years warranty (CAT No. AKP-CHR-35735P of Jaquar). including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying and fixingTV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, etc. overhead & contractor's profit complete for finished item of work in all floors as directed by Engineer-in-charge.

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326) – 160mm dia

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326) – 110mm dia

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326) – 75mm dia

Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practicefor nominal dia 75 mm (3") and grating size 100 mm dia of weight not less than 4.0 Kgs including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying, fixing, testing and commissionig of approved make PVC vent cowl with necessary accessories etc., complete.

Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification, complete for finished item of work.

Supplying, installing, testing and commissionig of R.C.C Plain end pipe NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe with all leads and lifts, making necessary connections as required etc., complete. (Provision for road crossings)

Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors

Supplying & Fixing of PVC/SWR Plain Bend of 110 mm dia

Supplying& Fixing of PVC/SWR Door Bend of 110 mm dia

Supplying of PVC/SWR 45 degree Bend of 110 mm dia

Supplying & Fixing of PVC/SWR Single Tee of 110 mm dia.

Supplying & Fixing of PVC/SWR Single Tee with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Tee of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Tee with door of 110 mm dia

Supplying & Fixing of PVC/SWR Single Y of 110 mm dia.

Supplying & Fixing of PVC/SWR Single Y with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Y of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Y with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Coupler of 110 mm dia.

Supplying & Fixing of PVC/SWR Vent Cowl of 110 mm dia.

Supplying & Fixing of PVC/SWR Reducer of 110 dia.

Supplying & Fixing of PVC/SWR Pipe clip of 110 mm dia.

Supplying & Fixing of PVC/SWR P-Trap(big with air vent) of 110 mm dia.

Supplying & Fixing of PVC/SWR Floor-Trap(Bell mouth) of 110 mm dia.

Supplying & Fixing of PVC/SWR Plain Bend of dia 75 mm

Supplying & Fixing of PVC/SWR Door Bend of dia 75 mm

Supplying & Fixing of PVC/SWR 45 degree Bend of dia 75 mm

Supplying & Fixing of PVC/SWR Single Tee of dia 75 mm

Supplying & Fixing of PVC/SWR Single Tee with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Double Tee of dia 75 mm

Supplying & Fixing of PVC/SWR Double Tee with door of dia 75 mm

Supplying & Fixing of PVC/SWR Single Y of dia 75 mm

Supplying & Fixing of PVC/SWR Single Y with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Double Y of dia 75 mm

Supplying & Fixing of PVC/SWR Double Y with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Coupler of dia 75 mm

Supplying & Fixing of PVC/SWR Vent Cowl of dia 75 mm

Supplying & Fixing of PVC/SWR Pipe Clip of dia 75 mm

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

b) 25 mm dia (Screwed ends)

c) 32 mm dia (Screwed ends)

d) 40 mm dia (Screwed ends)

Supplying, installing, testing and commissioning CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU-G/Honeywell

Supplying and lying P.C.C support blocks of 1:2:4 concrete mix of sizes as given below for pipe supports on the terrace complete.

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. for Rigid PVC rain water pipes conforming to IS 13592 - 1992 (Type A) with all fittings like shoes, bends fixed in the pipe shafts (ducts) with suitable supports etc., complete.(for RWP & balcony drainage)

External Water Supply & Drainage – HDPE pipelines with fittings, valves, inspection chambers, hume-pipe drain and pump set with panel

S&F premium make HDPE Pipes conforming to IS 4984 - 2016 including the cost of pipe & labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge. PN6

S&F premium make HDPE Pipes conforming to IS 4984 - 2016 including the cost of pipe & labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge.

PIPE ENDS LONG NECK

140mm x 160mm dia

125mm x 140mm dia

110mm x 125mm dia

Supplying, installing, testing and commissioning CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU-G/Honeywell

Supplying and lying P.C.C support blocks of 1:2:4 concrete mix of sizes as given below for pipe supports on the terrace complete.

Supplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class - I, Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification, complete for finished item of work.

Supplying, installing, testing and commissionig of R.C.C Plain end pipe NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe with all leads and lifts, making necessary connections as required etc., complete. (Provision for road crossings)

Supply, Transportation and erecting of 5.00HP 25 Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha

Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T /Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes : As per list of recommended brands . Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor

Landscaping Works

Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. By Mechanical Means

Bed preparation for Dibbling for Bermuda/Doob/ Shade Grass :-Dressing the surface to the desired shape, laying 150 mm (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, compacting to 4" thickness by hand roller including cost of red garden soil, sand and labour charges etc. complete for bed preparation and dibbling rooted slips of grass @2" apart and ramming including slipping of grass, racking the soil before dibbling, watering and ramming complete etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work excluding cost of dibbling grass and fertilizer for 1 sqm

Bed preparation for Korean/Mexican: Dressing the surface to the desired shape, laying of 150 mm. (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, rolling (compacting to 4" thickness by hand roller), including the cost of red garden soil, sand and labour charges etc., for complete bed preparation and laying and ramming of lawn mats / rolls in proper position on existing prepared bed by internal transportation from dumped place, including cost of labour for laying, ramming by hand roller / demesha, internal transportation and watering etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work.

Hedge / shrub planting: Digging the trench of size 0.3 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (10 No./Sqm of plants & bag size based on the spacing 0.3 c/c as per the design.)

Hedge / shrub planting: Digging the trench of size 0.3 m depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including application of fertilizers and pesticides (@ 20 gms/pit/sqm) and all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work, excluding cost of fertilizers and plant material – unit 1 Sqm. (No. of plants & bag size as per spacing in design)

Digging of 0.6x0.6x0.6 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work. (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt))

Digging of 0.45x0.45x0.45 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work. (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt))

Maintenance of lawns: watering to the lawn once in a days @ 10 to 15 ltrs /per Sqmt basing on season and weather conditions (30 watering is required in a month to maintain sub-soil moisture continuously), excluding cost of water including all operational, incidental, labour charges for complete of work, for one year maintenance.

Maintenance of groundcover/flower beds: Watering to ground cover (one's in three day's @ 5 litres/per Sqmts shall be provide to maintain sub soil moisture continuously) by manually, excluding cost of water including all operational, incidental, labour charges for complete of work, for one year maintenance.

Maintenance of Palms/Tree planting: watering (once in three days @ 5 Lts/per plant shall be provide to maintain sub soil moisture continuously) by manually, but excluding cost of water including all operational, incidental, labour charges for complete of work, for one year maintenance.

Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground covers and specified plants as per directions of officer in charge at site including cost of plants and conveyance of all materials and labour charges etc., plants of bag size 7" x 8" of plant height not less than 1.0 feet, 8" x 10" of plant height not less than 3.0 feet, 13" x 13" of Tree/Palm height not less than 5 feet, 13" x 13" of plant (Hedges & Shrub) height not less than 2 feet, 15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet, 18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom dia of the stem is 0.75'' and above, 21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7 feet, bottom dia of the stem is 1'' and above. Heights mentioned above are excluding bag height. All the plants supplied shall be with sturdy stem, well formed crown, vigorously growing tip, healthy foliage without any infestation and the plants shall be supplied after proper hardening off. the rates inclusive of cost of plants, loading, transportation to the site, and unloading, labour charges for handling & complete for finished item of work.

For paspalum grass(seeds )

Lawn (Korean grass) – supply

Duranta gold – Hedge / shrub plant, 7" x 8" bag

Galphimia glauca (gold) – shrub, 7" x 8" bag

Acalypha red – Hedge / shrub plant, 7" x 8" bag

Buxus sempervirens – Hedge / shrub plant, 7" x 8" bag

Tecomaria capensis – shrub, 7" x 8" bag

Nerium oleander dwarf white – shrub, 7" x 8" bag

Ixora coccinea dwarf pink – shrub, 7" x 8" bag

Heliconia american dwarf orange – shrub, 7" x 8" bag

Dracaena mahatma – shrub, 7" x 8" bag

Pisonia alba – shrub, 7" x 8" bag

Pandanus – shrub, 7" x 8" bag

Leucophyllum – shrub, 7" x 8" bag

Roystonea regia (Royal palm) – 21"x21" bag

Jacaranda mimosifolia – tall plant (tree), 21" x 21" bag

Plumeria – tall plant (tree), 21" x 21" bag

Silver Oak (Grevillea robusta) – tall plant (tree), 21" x 21" bag

Cassia fistula – tall plant (tree), 21" x 21" bag

Millingtonia hortensis – tall plant (tree), 21" x 21" bag

Veitchia merrillii (palm) – 21" x 21" bag

Delonix regia – tall plant (tree), 21" x 21" bag

Albizia julibrissin – tall plant (tree), 21" x 21" bag

Transportation of paspalum grass, lawn (Korean grass) and bag plants from Kadiyam to Guntur – end to end (loading, transport & unloading), quantity as per approximate weight of plants

Compound Wall – 0.9 m masonry on RCC foundations with 0.9 m MS grills over, plastering, putty & painting

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

RCC M 25 Design mix corresponding to table 9 of IS 456 using 20 mm graded machine hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc to site and including hire charges and labour charges for centering, shuttering, machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work complete as per SS and as directed by the departmental officer in charge of the work. But excluding seignorage charges.

RCC M 25 Design mix corresponding to table 9 of IS 456 using 20 mm graded machine hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc to site and including hire charges and labour charges for centering, shuttering, machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work complete as per SS and as directed by the departmental officer in charge of the work. But excluding seignorage charges.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Masonry work in CM (1:6) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Providing and applying wall putty of white cement / polymer / cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing to remove dirt and loose powder, applying emery paper, sanding, cleaning, applying knifing paste filler by putty knife / muslin pad, air drying and sanding with 180 & 320 No. emery paper, including cost and conveyance of all materials, labour, overheads & contractors profit complete for finished item of work.

Painting walls with Snowcem or other equal and approved water proof cement paint, 2 coats over one coat of priming (cement primer exterior based), total 3 coats (all colours), on new plastered external surfaces including cost and conveyance of all materials, labour, scaffolding, overheads & contractors profit complete for finished item of work. (BLD-CSTN-10-3)

Providing and Fixing Mild Steel, Structural Steel, I.e., Angles, Channels and I sections.of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings to be supplied at the time of execution of work, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental, Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position etc. complete for finished item of work.

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Boundary Fencing for Transco Site – 1.8 m MS pipe frame with chain-link mesh on RCC pedestals

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Supplying and fixing 1.8m high fencing with Vertical MS Hallow Pipe -80mmx80mm - 3.2mm thk at 3m centre to centre with 0.4m embeded in concrete pedestals with MS Plates - 200x50x4mm and Horizontal on the top and center of the vertical post of MS Hallow Pipe -50mmx50mm - 2mm thk . Corner, end and every 10th post to be strutted. Fixing Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge to posts using flats of size 150mm x 6mm and bolts etc., as per approved drawing, including cost of bolts and brackets, fabrication and erection in position, cost and conveyance of all materials to work site etc., all operational, incidental labour charges, power charges, overheads & contractors profit etc. complete for finished item of work.

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Provision for Seignorage Charges @2%

Towards Merit 2% on Seignorage Charges

Towards DMF 30% on Seignorage Charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Provision for Physical & Price Contingencies @ 4%

Unforeseen item

Volley Ball Courts (2 Nos) – site clearance, levelling, murram/sand base with GSB, fine-sand surface, RCC pedestals, 4.9 m MS pipe fencing and volleyball poles

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. By Mechanical Means

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Forming embankment with Murram by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Forming embankment with Murram 60%, Sand-30%, Clay Soil-10% by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Construction of Granular sub-base by providing HBG material confirming to Grading - V of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Supplying and fixing 4.9m high fencing with Vertical MS Hallow Pipe -80mmx80mm - 3.2mm thk at 3m centre to centre with 0.4m embeded in concrete pedestals and Horizontal on the top and center of the vertical post of MS Hallow Pipe -50mmx50mm - 2mm thk . Corner, end and every 10th post to be strutted. Fixing Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge to posts using flats of size 150mm x 6mm and bolts etc., as per approved drawing, including cost of bolts and brackets, fabrication and erection in position, cost and conveyance of all materials to work site etc., all operational, incidental labour charges, power charges, overheads & contractors profit etc. complete for finished item of work

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Supply, installation and fixing of tournament-grade (FIVB-pattern) fixed volleyball post – per post (each). Post made of 100 mm OD heavy-wall hot-dip galvanised MS tube (min. 4 mm wall) with epoxy/polyurethane powder-coated finish, 2.55 m above ground, height-adjustable for men / women / junior play (2.43 / 2.24 / 2.00 m) with calibrated height markings; integral stainless-steel gear-box ratchet winch with crank handle for net tensioning and nylon/steel rope pulleys; 300 mm dia x 900 mm deep galvanised ground sleeve with lockable cap set in M20 cement concrete footing; 50 mm thick high-density foam protective padding with weather-proof PVC cover; including share of Garware tournament-quality net with Kevlar/steel top cable, side bands and antennae per court, complete with all hardware, transport, installation, testing and overheads & contractor's profit, as directed by the Engineer-in-Charge.

Cricket Net Practice – PCC base (2 Nets) – site clearance, levelling, gravel GSB, PCC pitch base, RCC pedestals and MS tubular frame with nylon net

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. By Mechanical Means

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Providing Granular sub-base / base course with Gravel materials (Table 400.13) by mix in place method for the base of Cricket Net Practice pitch & run-up area, including profile correction and filling of low-lying areas – spreading approved local gravel in uniform layers over the prepared (scarified & compacted) sub-grade, mixing by mix in place method and compacting with smooth wheel roller at OMC to achieve the desired density, finishing to required camber/levels to receive PCC base / turf, complete as per Clause 401.4 & Technical Specification Clause 408 MoRD / MoRTH, including cost of all labour charges, hire charges of machinery, fuel charges, wages of driver and other incidental charges etc., complete as per SS and as directed by the departmental officer in charge of work.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

supply and installation of nylon fencing using a Nylon Net with a mesh size of 2 inches x 2 inches and a thickness of 2.5mm, ensuring durability and strength. For cricket netting, the mesh size will be 40mm x 40mm with a thickness of 2.5mm, specifically designed for optimal performance and safety. Additionally, the nylon net will be UV-resistant and sourced from Garware

Cricket Net Practice – Synthetic Turf (2 Nets) – site clearance, levelling, gravel GSB, PCC base, RCC pedestals, MS frame, synthetic turf and nylon net

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. By Mechanical Means

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Providing Granular sub-base / base course with Gravel materials (Table 400.13) by mix in place method for the base of Cricket Net Practice pitch & run-up area, including profile correction and filling of low-lying areas – spreading approved local gravel in uniform layers over the prepared (scarified & compacted) sub-grade, mixing by mix in place method and compacting with smooth wheel roller at OMC to achieve the desired density, finishing to required camber/levels to receive PCC base / turf, complete as per Clause 401.4 & Technical Specification Clause 408 MoRD / MoRTH, including cost of all labour charges, hire charges of machinery, fuel charges, wages of driver and other incidental charges etc., complete as per SS and as directed by the departmental officer in charge of work.

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX

Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Supply and laying of 3/8" tufted synthetic grass (artificial turf) of 35 mm pile height, fibre colour 4 field green + 4 olive green, root zone 4 jute + 4 field green with covering of 14 stitches per 10 cm with double backing UV stable, 215 gram/sq.m, coated with black SBR latex, fibres meeting stringent environmental standards, laid over the prepared PCC base of the cricket net practice pitch, including cost of material, transportation to the site, labour charges etc., complete for finished item of work.

supply and installation of nylon fencing using a Nylon Net with a mesh size of 2 inches x 2 inches and a thickness of 2.5mm, ensuring durability and strength. For cricket netting, the mesh size will be 40mm x 40mm with a thickness of 2.5mm, specifically designed for optimal performance and safety. Additionally, the nylon net will be UV-resistant and sourced from Garware

Pathways & Site Development – site clearance, levelling, playground filling (murram/GSB), murram pathway and CC paver pathway with kerbs

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. By Mechanical Means

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Construction of Granular sub-base by providing HBG material confirming to Grading - V of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.

Forming embankment with Murram by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Forming embankment with Murram 60%, Sand-30%, Clay Soil-10% by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Filling with carted gravel in pathways, trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for finished item of work (APSS NO.309&310)

Vibrated Plain Cement Concrete (1:3:6) nominal mix using 220 kg of cement and 20mm graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., and including all charges for Concrete Mixer, machine mixing, laying concrete in position, vibrating, curing, overheads & contractors profit etc., for finished item of work (APSS No. 402)

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH

Supply of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer’s specifications set over the 50 mm thick sand bed with hand roller compaction with joint neatly in homogeneous or heterogeneous pattern as the colour and pattern shall be as per the drawings furnished by the architect, including cost and conveyance of all materials like cement, sand, water, tiles, etc., to site including all operational, incidental, labour charges, laying tiles to required slope as directed by the Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.

Supply & application of two coats of acrylic exterior emulsion paint having VOC content less than 50 grams/litre, of shade approved by the Engineer-in-Charge to give an even shade, after thoroughly brushing the surface to remove all dirt and loose powdered materials, including cost and conveyance of all materials to site, operational, incidental, labour charges, overheads & contractors profit complete for finished item of work.

Underground Clear Water Sump – excavation, anti-termite, PCC bed, RCC M25 raft, walls & slab with steel, internal plastering

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge..

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

RCC M 25 Design mix corresponding to table 9 of IS 456 using 20 mm graded machine hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc to site and including hire charges and labour charges for centering, shuttering, machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work complete as per SS and as directed by the departmental officer in charge of the work. But excluding seignorage charges.

Rcc Wall 200mm Thk

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Septic Tank (two chambers with RCC baffle walls) – excavation, anti-termite, PCC bed, RCC M25 raft, walls & cover slab, plastering

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

RCC M 25 Design mix corresponding to table 9 of IS 456 using 20 mm graded machine hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc to site and including hire charges and labour charges for centering, shuttering, machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work complete as per SS and as directed by the departmental officer in charge of the work. But excluding seignorage charges.

Rcc Wall 200mm Thk

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Plastering 12mm thick for internal walls using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Public Toilet Blocks – Male & Female with child-feeding room (2 Nos) – RCC frame, flyash masonry, plastering, waterproofing, tiling, doors and painting

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Filling with carted gravel in pathways, trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for finished item of work (APSS NO.309&310)

Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge..

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

RCC M 25 Design mix corresponding to table 9 of IS 456 using 20 mm graded machine hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc to site and including hire charges and labour charges for centering, shuttering, machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work complete as per SS and as directed by the departmental officer in charge of the work. But excluding seignorage charges.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Masonry work in CM (1:6) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Masonry work in CM (1:6) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Reinforced Masonry for partition walls (150 mm thick) in CM (1:6) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., but excluding cost of steel and its fabrication charges complete for finished item of work.

Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Flooring with Non Skid Ceramic tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish (BMT-C.01), set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand, water and tiles etc., seigniorage charges, etc., complete for finished item of work. (BLD-CSTN-7-6)

Dadoing to walls with first quality decorated coloured background glazed tiles of size 200mm x 300mm of approved colour set over base coat of C.M (1:3) prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3 Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials, labour charges, water to work site, seigniorage and all operational, incidental, mixing mortar, fixing in position, lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work. (BLD-CSTN-7.20)

Flooring with 18 to 20 mm thick Anti - skid Granite (Black) 18-20 mm thick upto 2.43 M (For Stair case) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and overheads & contractors profit complete for finished item of work.

Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same and over heads &contractor profit etc.

Providing and applying wall putty of white cement / polymer / cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing to remove dirt and loose powder, applying emery paper, sanding, cleaning, applying knifing paste filler by putty knife / muslin pad, air drying and sanding with 180 & 320 No. emery paper, including cost and conveyance of all materials, labour, overheads & contractors profit complete for finished item of work.

Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Providing and applying wall putty of white cement / polymer / cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing to remove dirt and loose powder, applying emery paper, sanding, cleaning, applying knifing paste filler by putty knife / muslin pad, air drying and sanding with 180 & 320 No. emery paper, including cost and conveyance of all materials, labour, overheads & contractors profit complete for finished item of work.

Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 gauge M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm (5mm+5mm) thick PVC sheet fitted in the M.S. frame welded / sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, with 6 Nos M.S. Z-type hold fasts, 3 Nos 'T' / butt hinges per leaf, complete as per direction of Engineer–in–charge and manufacturers specification. (SoR 2026-27, BMT-N.51)

SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT): Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19gauge. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-in-charge.

Supplying and fixing of Fixed Louvered Ventilators made of pre -painted steel(base steel as per IS 513 of -0.58 mm thick'D"quality,galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick,finish painted with a polyester paint of 12-16 microns thick and back coated with 57 microns thick alkyd backer,The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pin head glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket. corner brackets made of CRCA with Zinc Phosphate.The frames to be fixed to the concrete /masonry wall by means of self expanding screws including10mm square guard bars with 6"pitch complete for finished itemofwork. Ventilators:Fixed louvers 4'-0"x2'0"(1219.2 x 609.6 mm) (Box section) outer frame section size of 33x56mm Mullion section size of 33x56mm

supply and installation of High Pressure Laminate (HPL) toilet cubicles using 12mm thick panels, made from phenolic resins under high pressure. These panels have a density greater than 1.40 kg/cm³, water absorption below 0.60–0.8%, and are resistant to heat, bacteria, chemicals, scratches, and impacts, meeting IS-2046 and EN438 standards. Each cubicle will be 1200mm (W) x 1500mm (D) x 2000mm (H) with door size of 600mm (W) x 1800mm (H). Urinal Modesty Panels (UMP’s) will also be installed, each measuring 500mm (W) x 900mm (H). SS/Nylon hardware accessories include auto return hinges (3 per door), indicator lock, door knob, coat hook, adjustable legs, and anodized aluminum U, L, H profiles with a top rail. Installation includes adjustable feet with 150mm floor clearance and secure fixing using aluminum U-channels, top rails, and wall fixings.

Retrofitting of Existing Building – dismantling & scraping, repairs, re-plastering, roof waterproofing, flooring & dado, doors/windows, roofing and painting

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH

Dismantling Steel Work in all Types of Sections upto a height of 5 m above Plinth Level excluding Cutting of rivet as per Technical Specification Clause 202 MORD / MORTH including stacking of dismantled material with all lifts and lead upto 1000 m.

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them within 100 metre lead.

Through scraping of old plastered surface disposal of unserviceable materials within 100 metres lead. complete fininsh of item of work

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Filling with carted gravel in pathways, trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for finished item of work (APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Masonry work in CM (1:6) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Flooring with Non Skid Ceramic tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish (BMT-C.01), set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand, water and tiles etc., seigniorage charges, etc., complete for finished item of work. (BLD-CSTN-7-6)

Dadoing to walls with first quality decorated coloured background glazed tiles of size 200mm x 300mm of approved colour set over base coat of C.M (1:3) prop. 12mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3 Kg of cement per sqm and jointed with neat white cement paste at 0.20 kg per sqm mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials, labour charges, water to work site, seigniorage and all operational, incidental, mixing mortar, fixing in position, lift charges, curing etc., complete as per SS or as directed by the departmental authorities for finished item of work. (BLD-CSTN-7.20)

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)

Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush on line with plastering.

Flooring with 18 to 20 mm thick Anti - skid Granite (Black) 18-20 mm thick upto 2.43 M (For Stair case) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and overheads & contractors profit complete for finished item of work.

Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same and over heads &contractor profit etc.

Providing and applying wall putty of white cement / polymer / cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing to remove dirt and loose powder, applying emery paper, sanding, cleaning, applying knifing paste filler by putty knife / muslin pad, air drying and sanding with 180 & 320 No. emery paper, including cost and conveyance of all materials, labour, overheads & contractors profit complete for finished item of work.

Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Providing and applying wall putty of white cement / polymer / cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing to remove dirt and loose powder, applying emery paper, sanding, cleaning, applying knifing paste filler by putty knife / muslin pad, air drying and sanding with 180 & 320 No. emery paper, including cost and conveyance of all materials, labour, overheads & contractors profit complete for finished item of work.

Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, and all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Supply and fabrication of heavy steel works like trusses, stanchions, heavy beams & girders using MS structural steel angles / channels / I-sections as per IS 808, including cost of welding rods, power charges, labour charges for cutting, placing, welding and erecting in position and fixing using chain pulley blocks, derrick pole arrangements and cranes, cost & conveyance of all materials including wastage to site, complete for finished item of work.

Supply,fabricating and providing Roofing with prepainted galvalume trapezoidal profile roofing sheets with 0.5mm thickness, coating: Alu zinc coating AZ150 GSM tensile strength 550MPA paint coating regular modified polister painting. Painting thickness (top):8x20 microns, (bottom) 5 to 7 microns, sheet width 1.020 , length: maximum 12mts with regular range colours fixed with GI 'J' bolts and nuts 8mm dia complete excluding the cost of purlins , rafters, truses and cost and conveyence of all materials and labour charges for all operations etc., complete for finished item of work

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast.Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 35 mmthick conforming to IS:2202 with Bothsides Laminate Sheets - Mat Finish: 1 mm thick as per drawing including cost of Stainless Steel fixtures such as 6 Nos. Butt hinges 150mm long, 2 No tower bolt of 300x10mm dia, 1 No. Heavy duty mortise lock 6/7 levers (IS:2209) with PC or CP handles complete set, 2 No.s Vision panel - 200x1200mm toughened glass -12mm thk, 4 Nos. handles of 200 mm size & 2 Nos. Heavy duty door stoppers and 2 nos. rubber bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.0 X 2.1m)

Supplying and fixing of Fixed Louvered Ventilators made of pre -painted steel(base steel as per IS 513 of -0.58 mm thick'D"quality,galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick,finish painted with a polyester paint of 12-16 microns thick and back coated with 57 microns thick alkyd backer,The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pin head glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket. corner brackets made of CRCA with Zinc Phosphate.The frames to be fixed to the concrete /masonry wall by means of self expanding screws including10mm square guard bars with 6"pitch complete for finished itemofwork. Ventilators:Fixedlouvers4'-0"x2'0"(1219.2 x 609.6 mm) (Box section) outer frame section size of 33x56mm Mullion section size of 33x56mm

Providing and fixing factory made uPVC any colour casement/casementcum fixed glazed windows comprising of uPVC multichambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame47 x 50mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window up to 2.50 sqm).

Street Furniture – granite stone benches (8 Nos), SS twin dustbins (8 Nos) and MS signages on PCC foundations

Supply & Fixing Sadarahalli granite stone with 5 line dressing Double Patti of 5' length seating benches with back rest, width 16", 4" thick and 18" height, leg size 4" width, including cost and conveyance of all materials, loading, unloading, transport and all operational, incidental labour & lift charges, overheads & contractor's profit, complete for finished item of work.

Supply and fixing of Pole-Mounted Stainless Steel Dual Dustbin: twin cylindrical bins (60 litres per bin) mounted side-by-side between sturdy vertical stainless steel poles with square base plates bolted into concrete/ground; brushed/matte or polished stainless steel finish with perforated (square cut-out) pattern for ventilation; open top for touch-free disposal with swinging mechanism to tilt bins for emptying; rust-resistant, anti-corrosive, suitable for heavy outdoor public use, complete.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Toilet Blocks – Internal Electrification (2 Nos) – conduits, point wiring, switches & sockets, DBs with MCBs, LED fittings and fans

Supply and laying of following size ISI …….. outer dia medium grade with IS:9537 part 3 FRLS regid PVC pipe, concealed in wall with PVC deep Junction Boxes confirms to IS : 3419, PVC Bends including required accessories complete. Makes : Precision/Universal&Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab /Anchor/ Polyline/ Orbit/ AKG/Beljin

25mm (2.20 mm thickness)

32mm (2.10 mm thickness)

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box and front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Primary Light Point)

Secondary Light Point Supply and fixing of ceiling rose for secondary light point (conduit and wire is extra) complete

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box a nd front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Fan Point)

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of switches/sockets:- Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)

Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board including giving all connections and all labour charges etc., complete. Makes: Legrand / Schneider / Crabtree / L&T-englaze / GM / Goldmedal / Million / Anchor / Precision / Honeywell (Model Data 2026-27, SoR 2.1.4)

Supply and Fixing of 16A 2Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ] Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Supply and run of 1 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 1 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 56/0.3mm (4.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 2 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and fixing of distribution board Protection suitable for IP43, S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way SPN Distribution board 40A DP MCB 10KA 1 Nos as incomer and 8Nos 6-32A SP MCB's 10KA as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 4way TPN Distribution board 63A 4P MCB 1Nos as incomer and 12Nos 6-32A SP MCB's as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way TPN Distribution board 63A 4P MCB 1Nos as incomer and 24Nos 6-32A SP MCB's as outgoers

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I. a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight.

Supply of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser with IP 65 Protection etc., complete., Makes : Philips/Bajaj / Crompton / Surya / Havells / Greenlites/ Insta Power/HPL /Halonix/ Panasonic.

Supply and Transportation of 36W, 2' x2' (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete with 5 years warranty. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready / FortuneArrt// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Supply ,installation testing comissioning of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200cubic meter/min but without Regulator. Makes : Crompton / Bajaj Kassels 50 / Usha atom

Supply of 12" (300mm) Light duty exhaust fan with metallic blades and wire guard etc complete Makes: Crompton / Almounard / Havells Ventil Air-DB – including labour charges for fixing of exhaust fan in wall with necessary connections and masonry work (HAM Office Building L516 ₹900.92)

Existing Building – Internal Electrification – conduits, point wiring, switches & sockets, DBs with MCBs, LED fittings and fans

Supply and laying of following size ISI …….. outer dia medium grade with IS:9537 part 3 FRLS regid PVC pipe,concealed in wall with PVC deep Junction Boxes confirms to IS : 3419, PVC Bends including required accessories complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/ AKG/Beljin

25mm (2.20 mm thickness)

32mm (2.10 mm thickness)

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box and front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Primary Light Point)

Secondary Light Point Supply and fixing of ceiling rose for secondary light point (conduit and wire is extra) complete

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box a nd front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Fan Point)

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of switches/sockets:- Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/Million (M-VEE)

Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type socket with cover plate on a common switch board including giving all connections and all labour charges etc., complete. Makes: Legrand / Schneider / Crabtree / L&T-englaze / GM / Goldmedal / Million / Anchor / Precision / Honeywell (Model Data 2026-27, SoR 2.1.4)

Supply and Fixing of 16A 2Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ] Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Supply and run of 1 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 1 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 56/0.3mm (4.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 1 of 56/0.3mm (4.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 2 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and fixing of distribution board Protection suitable for IP43, S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way SPN Distribution board 40A DP MCB 10KA 1 Nos as incomer and 8Nos 6-32A SP MCB's 10KA as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 4way TPN Distribution board 63A 4P MCB 1Nos as incomer and 12Nos 6-32A SP MCB's as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way TPN Distribution board 63A 4P MCB 1Nos as incomer and 24Nos 6-32A SP MCB's as outgoers

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I. a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight.

Supply of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser with IP 65 Protection etc., complete., Makes : Philips/Bajaj / Crompton / Surya / Havells / Greenlites/ Insta Power/HPL /Halonix/ Panasonic.

Supply and Transportation of 36W, 2' x2' (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete with 5 years warranty. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready / FortuneArrt// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Supply ,installation testing comissioning of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200cubic meter/min but without Regulator. Makes : Crompton / Bajaj Kassels 50 / Usha atom

Supply of 12" (300mm) Light duty exhaust fan with metallic blades and wire guard etc complete Makes: Crompton / Almounard / Havells Ventil Air-DB – including labour charges for fixing of exhaust fan in wall with necessary connections and masonry work (HAM Office Building L516 ₹900.92)

External Electrification – 11 kV HT line, transformer, APFC panel & feeder pillar, LT cables with terminations, ducts & crossings, earthing and safety items

Supply Transportation and unloading the RS Joist of 9.0 mtr long 175mm x 85mm size at site in good condition for H.T. / L.T. lines support including cost and conveyance of all materials and labour charges etc., complete. as per EB drawing and approval.

Supply and erection of GI stay set of dia 20mm,2.4 mtr long stay rod and anchor plate 380mmx380mmx6.4mm including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete as per EB drawing and approval.

Supply and fixing of 11KV -V- cross arms with 75x40 mm MS channel including 4 nos 50 x 50 x6 mm packing plates (9 Kgs) duly welded with necessary clamping arrangements etc., complete as per EB drawing and approval.

Supply and fixing of 11 KV danger plates on the existing poles with necessary clamping arrangements etc., complete as per EB drawing and approval.

Supply and erecting 7/2.50 AAAC / Weasel (34 Sq.mm) conductor for Overhead line with stringing, binding and suitable size of clamps for Jumpering etc., complete. as per EB drawing and approval.

Supply and erecting approved make 11KV, 5KA metal oxide lightning arrestors suitable for 11 KV supply with necessary materials on existing cross arm complete. as per EB drawing and approval.

Supply and erecting porcelain pin type insulator suitable for 11KV line with suitable hardware on existing cross arms. complete. as per EB drawing and approval.

Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., as per EB drawing and approval.

Supply and erecting 11KV, H.G (Horn Gap) fuse set including all standard accessories etc., complete with cost and conveyance of all materials and labour charges complete., as per EB drawing and approval.

LOAD BREAK SWITCH Supply, Transportation, Installation and Commissioning of 11 KV, 630A, 25 KA Outdoor type Load Break Switch as detailed below with suitable CC foundation and 2 Nos GI pipe earthing with brick masonry chambers etc., complete for finished item of work. Makes:Make:ABB/ Megawin/Amara Raja/L&T. a) Load break switch: 11KV,630A, 25 KA with fuse trip, earth switch, manually operated spring charged mechanism with 2 no + 2 NC. b) HT HRC fuse upto 63A - 3 nos. c) Bus bar connection. d) Indication lamps. e) Manual trip Push button.

Supply and Transportation of XLPE insulated IS:7098/II/85 H.T. 3C, 120Sqmm cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. [Make: Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/RR Kabel/RPG].

Supply and erecting of heat shrinkable Outdoor termination kit for 11KV XLPE HT cable 3 core 120 Sqmm with Anti Tracking red colour material,with required components, prepration of cable ends, testing etc. as etc., complete Makes: Raychem / M Seal / Denson / Multy / Transeal - Hongshang.

Supply and erecting of heat shrinkable Indoor termination kit for 11KV XLPE HT cable 3 core 120 Sqmm with Anti Tracking red colour material with required components, prepration of cable ends, testing etc. as etc., complete Makes: Raychem / M Seal / Denson / Multy / Transeal - Hongshang.

Supply, Transportation, Installation, Testing and Commissioning of 11/0.433 KV TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II) with latest ammended and as per IS 1180 Part-I : 2014 latest ammended, OCTC with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. Makes : As per list of recommended brands as category I.

1. Rated KVA : 100KVA 2. Service: Outdoor / Indoor 3. Mounting : Plinth. 4. Copper wound : Double. 5. Type : Core. 6. Cooling : ONAN 7. Temp . Rise : 55⁰C. 8. Vector Group: Dyn 11 9. Primary Connection : Delta 10. Primary Volts : 11000 11. Primry Frequency : 50 12.Primary Phases : 3 13. Primary wires: 3 14. Secondary connection : Star 15. Secondary Volts : 415 / 433V 16. Secondary phases : 3 17. Secondary wires: 4 18. Taps on primary winding for primary voltage variation : +7.5% to - 7.5% in steps of 2.5%,

19. Terminal arrangement. a. HV: Bare Busings / Cable end box b. LV : Cable box 20. LV : One separate terminal for earthing. 21. Impedance(Z%) : .............As per IS specification

22. Fittings & Accessories. a. Rating and terminal marking plate b. Earthing terminals c. Lifting Lugs d. Conservator with drain plug. e. Oil level Indicator f. Dehydrating silicagel breather g. Air release device h. Drain cum filter wall i. Explosion vent with diaphragm j. Radiators (Attachable) k. Seperate neutral bushing l. Uni directional flat rollers. ALL AS PER SITE & CLIENT REQUIREMENT AND APPROVAL ONLY

APFCR Panel 80KVAR Fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard APCR panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat. Fuses shall be provided for Control purposes (All Panels shall be extendable type only). (Makes: L&T/ ABB)

Supply Installation Testing and commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/ switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be abricated from CPRI approved fabricator).

Supply and fixing of MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity… with thermal magnetic release panel mounted. 160A,3P,50KA MCCB-1Nos,

50KVAR Capacitor banks-, 20KVAR Capacitor banks- 2 Nos 10KVAR Capacitor banks-3 Nos, 5KVAR Capacitor banks-1 Nos, 2.5KVAR Capacitor banks-2 Nos, and suitable Capacitor duty power contactors Supply and fixing of MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity… with thermal magnetic release panel mounted. 125A 35KA TP MCCB-Nos, 63A 25KA TP MCCB- 2 Nos, 32A 25KA TP MCCB-6 Nos, 14 stage sensitivity up to 50 milli Amp APFC realy with suitable capacitor duty power contactors and LED Phase Indication lamps, 500A aluminium busbars of required size.

FEEDER PILLAR PANEL Supply, fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat.. Fuses shall be provided for Control purposes (All Panels shall be extendable type MCCB MAKE: L&T ( DSINE), ABB(TMAX)

Supply and fixing of MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity… with thermal magnetic release panel mounted. 125A 25KA 4Pole MCCB - 1 Nos, Multi function meter with CT 125/5A , class I

40A -63A10KA 3P MCB - 6 Nos

32A 10KA 4P MCB - 4 Nos

TIMER & CONTACTOR

LED Phase Indication lamps, 200A Aluminium busbars of reuqired size. Dual source meter for EB & DB metering

Supply and laying of the following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 1554-1, including laying in existing cable trench as per specifications etc complete as required. [Makes: Polycab / RPG / Finolex / Havells]

3.5 Core 240 Sqmm alluminium cable

3.5 Core 95 Sqmm alluminium cable

3.5 Core 50 Sqmm alluminium cable

3.5 Core 25 Sqmm alluminium cable

4 Core 16 Sqmm alluminium cable

4 Core 10 Sqmm alluminium cable

4 Core 6 Sqmm alluminium cable

3 Core 10 Sqmm Copper cable

3 Core 6 Sqmm Copper cable

3 Core 4 Sqmm Copper cable

Supply, laying, testing and commissioning of 3 core 2.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes: (category I) Finolex / RR kabel / Havells/ Finecab /KEI/Polycab/ Gloster/ Goldmedal/GM/ Fortune Arrt/Anchor /Million including all labour charges etc and as directed by Engineer incharge

3 Core 1.5 Sqmm Copper cable

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI

3.5 Core 240 Sqmm alluminium cable

3.5 Core 95 Sqmm aluminium cable – with crimped Al lugs (Model Data 2026-27, SoR 4.1.10 e)

3.5 Core 50 Sqmm aluminium cable – with crimped Al lugs (Model Data 2026-27, SoR 4.1.10 c)

4 Core 16 Sqmm alluminium cable

4 Core 10 Sqmm alluminium cable

4 Core 6 Sqmm alluminium cable

3 Core 10 Sqmm Copper cable – single compression gland with crimped lugs (Model Data SoR 4.1.11 b rate)

3 Core 6 Sqmm Copper cable – single compression gland with crimped lugs (Model Data SoR 4.1.11 b rate)

3 Core 4 Sqmm Copper cable – single compression gland with crimped lugs (Model Data SoR 4.1.11 b rate)

3 Core 2.5 Sqmm Copper cable – single compression gland with crimped lugs (Model Data SoR 4.1.11 b rate)

3 Core 1.5 Sqmm Copper cable – single compression gland with crimped lugs (Model Data SoR 4.1.11 b rate)

Providing Independent earthing by excavating a trench to a depth of 2.10m in ordinary soils as specified 1.50 X 0.6 to a depth of 0.9m and 1.2 X 0.6 to a depth of 1.20m, using 40 mm dia 'B' class GI Pipe of 2.5 m long with necessary accessories with 450mm x 50 mm thick hume pipe ring duly providing staggered holes including filling with 40 kg of hard coke and 20 kg salt providing with equal proportion of in layers etc. including cost and conveyance of all materials, overheads & contractors profit etc., complete for finished item of work

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in brick masonry (CM 1:3) Chamber of 400mmx 400m x 400mm with suitable cast iron cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 0.3mtr. length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including brick masonry (CM 1:3) Chamber of size 400m x 400m x 400mm covered with suitable cast iron Slab filling with salt and charcoal giving earth connection from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).

Providing independent CI earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply,erection,testing and commissioning of following sizes of copper strip on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required.

32 x 6mm Copper strip

Supply ,erection ,testing and commissioning of following G.I. Strip/G.I. wire on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required.

25x3mm GI strip

25x6mm GI strip

Supply,erection and commisioning of cable route marker with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) of size 60cm x 60cm at the bottom and 50cm x 50cm at the top with a thickness of 10 cm including inscription duly engraved as required.

Supply, fabricating , installing structural steel supports for fixing of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting for HT yard structure and exhaust pipe supports in DG set.

Supply , laying and fixing of following RCC hume pipe NP2 class in ground complete with RCC collars, jointing with cement mortar 1:2( 1 cement : 2 fine sand) etc including labour charges etc complete as required.

300mm dia NP2 RCC Hume pipe

150mm dia NP2 RCC Hume pipe

Supply of G I Pipe 100 mm dia B Class including cost and conveyance of all materials to site, overheads & contractors profit complete for finished item of work.

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete.

Earth work excavation including all soils for trench/Pole Pit /Earth Pit/ for covering of UG cables/HDPE pipe and refilling of Trench.

Supply and providing the following materials at site including cost of all accessories and labour charges etc., complete as required.

First aid box 18"x12"x8"

Danger Board in 3 langauges English/Telugu/Hindi in red colour with 11KV marks shall comply with IS:2551-1982. 250x200mm,

Danger Board in 3 langauges English/Telugu/Hindi in red colour with 440V marks shall comply with IS:2551-1982. 250x200mm,

Shock instrution chart in English / Hindi / Telugu duly framed with front glass

Street Lighting & High Mast – 12 m high mast with LED floods, 7.5 m decorative poles with LED street lights, post-top lanterns and bulk-head fittings

Supply,fabrication ,transportation and erection of 12 Mtrs Polygon High Mast with single section of 3mm thick of bottom 360mm and top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, and GI Pipe ring suitable for fixing luminaires with LED type aviation twin lamp. Makes: As per list of recommended brands. Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes: As per list of recommended brands. Earth work excavation with an approximate quantity of 4.0 Cum for erection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erection of High Mast and carriage etc complete.

Supply, transportation and erection of 200w LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K,minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/Polycab/Keselec/HPL/Jaquar/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Supply,fabrication ,transportation and erection of 7.5 mts long with 1 Mtr length decorative Single arm bracket made with MS galvanized 40mm/50mm dia pipe and MS BOX with all accessories as per the requirements at site and as per the directions of the field engineers

Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with HInged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.5 Mtrs height Pole having imensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template. Makes: Bajaj / Valmont/Laasma /Transrail /Utkarsh/ Skipper Fabrication, Transportation and supply of 1.0 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. Makes:Bajaj / Valmont /Transrail/Utkarsh/ Skipper/ Laasma/United

Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc.complete.

Supply and fixing of 60W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 95 lm/W and junction temprature < 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection ≥ 5KV with optics istribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : WIPRO / PHILIPS (GREEN LINE) / Lighting Technologies (Adornis) / SCHREDER (BRIKA) / GE / VIN (MATRIX) / CROMPTON (HAWK) / BAJAJ (EDGE+) / HALONIX (LUMOS - SUPER) / HAVELLS (ENDURA CITYLINER NEO) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG

Supply, transportation and erection of 60w LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K,minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/Polycab/Keselec/HPL/Jaquar/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Supply and Transportation and erecting of 40W LED Post top lantern made with cast Alluminium with decorative opel polycarbonate diffuser with IP 65 protection etc., complete with all accessories Makes: Crompton LPTO-40-CDL-M/ Bajaj Celesta BGCL 40 W LED Wh/Wipro LP 02 or equivalent in Phillips/ Keselec/ Havells/ Halonix

Supply, transportation and Installation of Supply of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser. Makes : Bajaj / Crompton / Surya / VIN / Havells / Green Lights / Insta Power.

Bore Wells with Pump Sets – drilling, PVC casing & cap, HDPE rising main, 5 HP submersible pump set with cable and starter

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe ,couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely.The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,

Drilling of Bore well 350/450mm dia for insertion of pipe dia of 160/175/200 mm

Supply and Fixing of PVC Bore cap including cost and conveyance of all materials and labour charges, all operational and incidental charges and excluding all taxes etc complete.

180mm Dia Bore Cap

Slotting charges for 175 / 180mm dia PVC casing pipe excluding all taxes etc., complete.

Perforation charges for 180 mm dia PVC casing pipe excluding all taxes etc., complete.

Supply and fixing of 180mm dia 6 kgs/sqm PVC casing pipe including cost and conveyance of all materials and labour charges, overheads & contractors profit complete for finished item of work

Supply of 90mm OD PE 80 Grade material 8 kg / Cm2 ISI Mark HDPE pipe upto 600 feet Makes : Sudhakar / Reliance / Duroline / Premier / Vijaya / Godavari.

Supply and run of 3 Core 2.5 Sqmm Flat Copper cable as per IS 694:1990 for Submersible Motors. Makes: V-Guard / Gold Medal / GM / Million / Vihan/Vimal /Finecab/ CRI/ Lubi/Hitech/ Airson/Ollvin

Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T /Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes : As per list of recommended brands . Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor

Upto 7.5 HP with DOL Starter of.

Supply, Transportation and erecting of 5.00HP 25 Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha

Toilet Blocks – Sanitary & Plumbing – WCs, wash basins, urinals, CP fittings, PE tanks, CPVC water lines with valves, SWR drainage and traps

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour as directed by Engineer-in-charge.

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated complete including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying & Fixing Indian makeFlat Back Wash Hand Basin jaquar/Equavalent make 1st quality conforming to IS:2556-Part-4:1972 of 560x430x185mm ,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty 31.75mm dia PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Wall Mixer with provision for overhead shower and 115mm long bend pipe with wall flange Jaquar make Continental series, Chrome finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of 12.7 mm dia NP push cock Ist quality Jaquar Continental series, Chrome Finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Angular stopcock with wall flange Jaquar Continental series, Chrome finish with 7 years warranty. (Make: Jaquar, Model: 5053) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Double coat hook Jaquar make Continental series, Chrome finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Rack with Lower Hanger (Stainless Steel) with hook Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1581H of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Ring Round Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AQN-CHR-7721 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Grab Bar (Stainless Steel) 450mm Long Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1503 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 years warranty: Chrome plated including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Tumbler Holder for Soap Dispenser with Glass bottle Jaquar make Continental series, Chrome Finish with 7 years warranty (CAT No. AKP-CHR-35735P of Jaquar). including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for all floors.

supply and fixing of 8mm thick thougned galss partions of size 4'0''x 2'0'' with etching the glass including fixing at site for urinals including full rounding the edges fixing in poisition,including cost and conveyance of all materials and labour charges,overheads and contractors profit complete for finished item of work for all floors

Supplying and fixingTV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, etc. overhead & contractor's profit complete for finished item of work in all floors as directed by Engineer-in-charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges, overheads & contractors profit complete for finished item of work.

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326) – 160mm dia

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326) – 110mm dia

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326) – 75mm dia

Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practicefor nominal dia 75 mm (3") and grating size 100 mm dia of weight not less than 4.0 Kgs including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying, fixing, testing and commissionig of approved make PVC vent cowl with necessary accessories etc., complete.

Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification, complete for finished item of work.

Supplying, installing, testing and commissionig of R.C.C Plain end pipe NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe with all leads and lifts, making necessary connections as required etc., complete. (Provision for road crossings)

Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors

Supplying & Fixing of PVC/SWR Plain Bend of 110 mm dia

Supplying& Fixing of PVC/SWR Door Bend of 110 mm dia

Supplying & Fixing of PVC/SWR 45 degree Bend of 110 mm dia

Supplying & Fixing of PVC/SWR Single Tee of 110 mm dia.

Supplying & Fixing of PVC/SWR Single Tee with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Tee of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Tee with door of 110 mm dia

Supplying & Fixing of PVC/SWR Single Y of 110 mm dia.

Supplying & Fixing of PVC/SWR Single Y with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Y of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Y with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Coupler of 110 mm dia.

Supplying & Fixing of PVC/SWR Vent Cowl of 110 mm dia.

Supplying & Fixing of PVC/SWR Reducer of 110 dia.

Supplying & Fixing of PVC/SWR Pipe clip of 110 mm dia.

Supplying & Fixing of PVC/SWR P-Trap(big with air vent) of 110 mm dia.

Supplying & Fixing of PVC/SWR Floor-Trap(Bell mouth) of 110 mm dia.

Supplying & Fixing of PVC/SWR Plain Bend of dia 75 mm

Supplying & Fixing of PVC/SWR Door Bend of dia 75 mm

Supplying & Fixing of PVC/SWR 45 degree Bend of dia 75 mm

Supplying & Fixing of PVC/SWR Single Tee of dia 75 mm

Supplying & Fixing of PVC/SWR Single Tee with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Double Tee of dia 75 mm

Supplying & Fixing of PVC/SWR Double Tee with door of dia 75 mm

Supplying & Fixing of PVC/SWR Single Y of dia 75 mm

Supplying & Fixing of PVC/SWR Single Y with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Double Y of dia 75 mm

Supplying & Fixing of PVC/SWR Double Y with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Coupler of dia 75 mm

Supplying & Fixing of PVC/SWR Vent Cowl of dia 75 mm

Supplying & Fixing of PVC/SWR Pipe Clip of dia 75 mm

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

25 mm dia (Screwed ends)

32 mm dia (Screwed ends)

40 mm dia (Screwed ends)

Supplying, installing, testing and commissioning CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU-G/Honeywell

Supplying and lying P.C.C support blocks of 1:2:4 concrete mix of sizes as given below for pipe supports on the terrace complete.

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. for Rigid PVC rain water pipes conforming to IS 13592 - 1992 (Type A) with all fittings like shoes, bends fixed in the pipe shafts (ducts) with suitable supports etc., complete.(for RWP & balcony drainage)

Existing Building – Sanitary & Plumbing – WCs, wash basins, urinals, CP fittings, PE tank, CPVC water lines with valves, SWR drainage and traps

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap, supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated complete including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks, 1 No.12.70mm PVC connection with brass union nuts CP coated, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges, overheads & contractors profit for finished item of work.

Supply & Fixing of 12.7 mm dia NP push cock Ist quality Jaquar Continental series, Chrome Finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Angular stopcock with wall flange Jaquar Continental series, Chrome finish with 7 years warranty. (Make: Jaquar, Model: 5053) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Double coat hook Jaquar make Continental series, Chrome finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Rack with Lower Hanger (Stainless Steel) with hook Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1581H of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Ring Round Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AQN-CHR-7721 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Grab Bar (Stainless Steel) 450mm Long Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1503 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 years warranty: Chrome plated including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Tumbler Holder for Soap Dispenser with Glass bottle Jaquar make Continental series, Chrome Finish with 7 years warranty (CAT No. AKP-CHR-35735P of Jaquar). including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying and fixingTV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, etc. overhead & contractor's profit complete for finished item of work in all floors as directed by Engineer-in-charge.

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326) – 160mm dia

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326) – 110mm dia

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302, 1319 & 1326) – 75mm dia

Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practicefor nominal dia 75 mm (3") and grating size 100 mm dia of weight not less than 4.0 Kgs including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying, fixing, testing and commissionig of approved make PVC vent cowl with necessary accessories etc., complete.

Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification, complete for finished item of work.

Supplying, installing, testing and commissionig of R.C.C Plain end pipe NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe with all leads and lifts, making necessary connections as required etc., complete. (Provision for road crossings)

Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors

Supplying & Fixing of PVC/SWR Plain Bend of 110 mm dia

Supplying& Fixing of PVC/SWR Door Bend of 110 mm dia

Supplying of PVC/SWR 45 degree Bend of 110 mm dia

Supplying & Fixing of PVC/SWR Single Tee of 110 mm dia.

Supplying & Fixing of PVC/SWR Single Tee with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Tee of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Tee with door of 110 mm dia

Supplying & Fixing of PVC/SWR Single Y of 110 mm dia.

Supplying & Fixing of PVC/SWR Single Y with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Y of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Y with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Coupler of 110 mm dia.

Supplying & Fixing of PVC/SWR Vent Cowl of 110 mm dia.

Supplying & Fixing of PVC/SWR Reducer of 110 dia.

Supplying & Fixing of PVC/SWR Pipe clip of 110 mm dia.

Supplying & Fixing of PVC/SWR P-Trap(big with air vent) of 110 mm dia.

Supplying & Fixing of PVC/SWR Floor-Trap(Bell mouth) of 110 mm dia.

Supplying & Fixing of PVC/SWR Plain Bend of dia 75 mm

Supplying & Fixing of PVC/SWR Door Bend of dia 75 mm

Supplying & Fixing of PVC/SWR 45 degree Bend of dia 75 mm

Supplying & Fixing of PVC/SWR Single Tee of dia 75 mm

Supplying & Fixing of PVC/SWR Single Tee with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Double Tee of dia 75 mm

Supplying & Fixing of PVC/SWR Double Tee with door of dia 75 mm

Supplying & Fixing of PVC/SWR Single Y of dia 75 mm

Supplying & Fixing of PVC/SWR Single Y with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Double Y of dia 75 mm

Supplying & Fixing of PVC/SWR Double Y with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Coupler of dia 75 mm

Supplying & Fixing of PVC/SWR Vent Cowl of dia 75 mm

Supplying & Fixing of PVC/SWR Pipe Clip of dia 75 mm

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

b) 25 mm dia (Screwed ends)

c) 32 mm dia (Screwed ends)

d) 40 mm dia (Screwed ends)

Supplying, installing, testing and commissioning CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU-G/Honeywell

Supplying and lying P.C.C support blocks of 1:2:4 concrete mix of sizes as given below for pipe supports on the terrace complete.

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. for Rigid PVC rain water pipes conforming to IS 13592 - 1992 (Type A) with all fittings like shoes, bends fixed in the pipe shafts (ducts) with suitable supports etc., complete.(for RWP & balcony drainage)

External Water Supply & Drainage – HDPE pipelines with fittings, valves, inspection chambers, hume-pipe drain and pump set with panel

S&F premium make HDPE Pipes conforming to IS 4984 - 2016 including the cost of pipe & labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge. PN6

S&F premium make HDPE Pipes conforming to IS 4984 - 2016 including the cost of pipe & labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge.

PIPE ENDS LONG NECK

140mm x 160mm dia

125mm x 140mm dia

110mm x 125mm dia

Supplying, installing, testing and commissioning CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU-G/Honeywell

Supplying and lying P.C.C support blocks of 1:2:4 concrete mix of sizes as given below for pipe supports on the terrace complete.

Supplying and fixing Gunmetal Gate (GM peet) valve as per IS-778 Class - I, Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification, complete for finished item of work.

Supplying, installing, testing and commissionig of R.C.C Plain end pipe NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe with all leads and lifts, making necessary connections as required etc., complete. (Provision for road crossings)

Supply, Transportation and erecting of 5.00HP 25 Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha

Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T /Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes : As per list of recommended brands . Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor

Landscaping Works

Clearing and grubbing the land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. By Mechanical Means

Bed preparation for Dibbling for Bermuda/Doob/ Shade Grass :-Dressing the surface to the desired shape, laying 150 mm (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, compacting to 4" thickness by hand roller including cost of red garden soil, sand and labour charges etc. complete for bed preparation and dibbling rooted slips of grass @2" apart and ramming including slipping of grass, racking the soil before dibbling, watering and ramming complete etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work excluding cost of dibbling grass and fertilizer for 1 sqm

Bed preparation for Korean/Mexican: Dressing the surface to the desired shape, laying of 150 mm. (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, rolling (compacting to 4" thickness by hand roller), including the cost of red garden soil, sand and labour charges etc., for complete bed preparation and laying and ramming of lawn mats / rolls in proper position on existing prepared bed by internal transportation from dumped place, including cost of labour for laying, ramming by hand roller / demesha, internal transportation and watering etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work.

Hedge / shrub planting: Digging the trench of size 0.3 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (10 No./Sqm of plants & bag size based on the spacing 0.3 c/c as per the design.)

Hedge / shrub planting: Digging the trench of size 0.3 m depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including application of fertilizers and pesticides (@ 20 gms/pit/sqm) and all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work, excluding cost of fertilizers and plant material – unit 1 Sqm. (No. of plants & bag size as per spacing in design)

Digging of 0.6x0.6x0.6 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work. (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt))

Digging of 0.45x0.45x0.45 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work. (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt))

Maintenance of lawns: watering to the lawn once in a days @ 10 to 15 ltrs /per Sqmt basing on season and weather conditions (30 watering is required in a month to maintain sub-soil moisture continuously), excluding cost of water including all operational, incidental, labour charges for complete of work, for one year maintenance.

Maintenance of groundcover/flower beds: Watering to ground cover (one's in three day's @ 5 litres/per Sqmts shall be provide to maintain sub soil moisture continuously) by manually, excluding cost of water including all operational, incidental, labour charges for complete of work, for one year maintenance.

Maintenance of Palms/Tree planting: watering (once in three days @ 5 Lts/per plant shall be provide to maintain sub soil moisture continuously) by manually, but excluding cost of water including all operational, incidental, labour charges for complete of work, for one year maintenance.

Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground covers and specified plants as per directions of officer in charge at site including cost of plants and conveyance of all materials and labour charges etc., plants of bag size 7" x 8" of plant height not less than 1.0 feet, 8" x 10" of plant height not less than 3.0 feet, 13" x 13" of Tree/Palm height not less than 5 feet, 13" x 13" of plant (Hedges & Shrub) height not less than 2 feet, 15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet, 18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom dia of the stem is 0.75'' and above, 21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7 feet, bottom dia of the stem is 1'' and above. Heights mentioned above are excluding bag height. All the plants supplied shall be with sturdy stem, well formed crown, vigorously growing tip, healthy foliage without any infestation and the plants shall be supplied after proper hardening off. the rates inclusive of cost of plants, loading, transportation to the site, and unloading, labour charges for handling & complete for finished item of work.

For paspalum grass(seeds )

Lawn (Korean grass) – supply

Duranta gold – Hedge / shrub plant, 7" x 8" bag

Galphimia glauca (gold) – shrub, 7" x 8" bag

Acalypha red – Hedge / shrub plant, 7" x 8" bag

Buxus sempervirens – Hedge / shrub plant, 7" x 8" bag

Tecomaria capensis – shrub, 7" x 8" bag

Nerium oleander dwarf white – shrub, 7" x 8" bag

Ixora coccinea dwarf pink – shrub, 7" x 8" bag

Heliconia american dwarf orange – shrub, 7" x 8" bag

Dracaena mahatma – shrub, 7" x 8" bag

Pisonia alba – shrub, 7" x 8" bag

Pandanus – shrub, 7" x 8" bag

Leucophyllum – shrub, 7" x 8" bag

Roystonea regia (Royal palm) – 21"x21" bag

Jacaranda mimosifolia – tall plant (tree), 21" x 21" bag

Plumeria – tall plant (tree), 21" x 21" bag

Silver Oak (Grevillea robusta) – tall plant (tree), 21" x 21" bag

Cassia fistula – tall plant (tree), 21" x 21" bag

Millingtonia hortensis – tall plant (tree), 21" x 21" bag

Veitchia merrillii (palm) – 21" x 21" bag

Delonix regia – tall plant (tree), 21" x 21" bag

Albizia julibrissin – tall plant (tree), 21" x 21" bag

Transportation of paspalum grass, lawn (Korean grass) and bag plants from Kadiyam to Guntur – end to end (loading, transport & unloading), quantity as per approximate weight of plants

Compound Wall – 0.9 m masonry on RCC foundations with 0.9 m MS grills over, plastering, putty & painting

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

RCC M 25 Design mix corresponding to table 9 of IS 456 using 20 mm graded machine hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc to site and including hire charges and labour charges for centering, shuttering, machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work complete as per SS and as directed by the departmental officer in charge of the work. But excluding seignorage charges.

RCC M 25 Design mix corresponding to table 9 of IS 456 using 20 mm graded machine hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc to site and including hire charges and labour charges for centering, shuttering, machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work complete as per SS and as directed by the departmental officer in charge of the work. But excluding seignorage charges.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Masonry work in CM (1:6) proportion (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Providing and applying wall putty of white cement / polymer / cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing to remove dirt and loose powder, applying emery paper, sanding, cleaning, applying knifing paste filler by putty knife / muslin pad, air drying and sanding with 180 & 320 No. emery paper, including cost and conveyance of all materials, labour, overheads & contractors profit complete for finished item of work.

Painting walls with Snowcem or other equal and approved water proof cement paint, 2 coats over one coat of priming (cement primer exterior based), total 3 coats (all colours), on new plastered external surfaces including cost and conveyance of all materials, labour, scaffolding, overheads & contractors profit complete for finished item of work. (BLD-CSTN-10-3)

Providing and Fixing Mild Steel, Structural Steel, I.e., Angles, Channels and I sections.of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings to be supplied at the time of execution of work, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental, Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position etc. complete for finished item of work.

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Boundary Fencing for Transco Site – 1.8 m MS pipe frame with chain-link mesh on RCC pedestals

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,Construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD /304 MORTH for foundations upto 3m depth etc complete as per SS and as directed by the departmental officer incharge of the work.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 162.0 kgs of cement, coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 415 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges, overheads & contractors profit complete for finished item of work.

Supplying and fixing 1.8m high fencing with Vertical MS Hallow Pipe -80mmx80mm - 3.2mm thk at 3m centre to centre with 0.4m embeded in concrete pedestals with MS Plates - 200x50x4mm and Horizontal on the top and center of the vertical post of MS Hallow Pipe -50mmx50mm - 2mm thk . Corner, end and every 10th post to be strutted. Fixing Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge to posts using flats of size 150mm x 6mm and bolts etc., as per approved drawing, including cost of bolts and brackets, fabrication and erection in position, cost and conveyance of all materials to work site etc., all operational, incidental labour charges, power charges, overheads & contractors profit etc. complete for finished item of work.

Painting to new iron work with one coat of Zinc Chromate Yellow Oxide primer and two coats of synthetic enamel paint Grade-I (VOC content less than 50 grams/litre) of approved shade, including cost and conveyance of all materials to site, incidental, operational and all labour charges, overheads & contractors profit complete for finished item of work (SS No. 1201, 1212 & 1207).

Provision for Seignorage Charges @2%

Towards Merit 2% on Seignorage Charges

Towards DMF 30% on Seignorage Charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Provision for Physical & Price Contingencies @ 4%

Unforeseen item

2 Volley ball Courts

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Mechanical Means

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary soils-Mechcanical Means-Upto 3 m depth

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Construction of Granular sub-base by providing HBG material confirming to Grading - V of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.

Forming embankment with Murram by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Forming embankment with Murram 60%, Sand-30%, Clay Soil-10% by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX

Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supplying and fixing 4.9m high fencing with Vertical MS Hallow Pipe -80mmx80mm - 3.2mm thk at 3m centre to centre with 0.4m embeded in concrete pedestals and Horizontal on the top and center of the vertical post of MS Hallow Pipe -50mmx50mm - 2mm thk . Corner, end and every 10th post to be strutted. Fixing Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge to posts using flats of size 150mm x 6mm and bolts etc., as per approved drawing, including cost of bolts and brackets, fabrication and erection in position, cost and conveyance of all materials to work site etc., all operational, incidental labour charges, power charges, overheads & contractors profit etc. complete for finished item of work.

Painting with Red Oxide Primer Paint - one coat and Synthetic Enamel Paints -Two coats -for new Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.

Providing and fixing Volleyball Pole fixed model, Made of 3"x4" MS pipe with special internal ratchet system for tightening of rope, the ratchet enables perfect tension control of the net, Epoxy painted Approx 50 Kgs each pair, Height Adjustable for Juniors, Men or Women, with Garware Tournament Quality Net, Black net with Red/Yellow Post

2 Cricket Net Practice with PCC base and Nylon Net of Mesh

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Mechanical Means

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary soils-Mechcanical Means-Upto 3 m depth

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Forming embankment with Gravel by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX

Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting with Red Oxide Primer Paint - one coat and Synthetic Enamel Paints -Two coats -for new Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.

Supply and installation of nylon fencing using a Nylon Net with a mesh size of 2 inches x 2 inches and a thickness of 2.5mm, ensuring durability and strength. For cricket netting, the mesh size will be 40mm x 40mm with a thickness of 2.5mm, specifically designed for optimal performance and safety. Additionally, the nylon net will be UV-resistant and sourced from Garware

2 Cricket Net Practice with Turff and Nylon Net of Mesh

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Mechanical Means

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary soils-Mechcanical Means-Upto 3 m depth

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Forming embankment with Gravel by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX

Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting with Red Oxide Primer Paint - one coat and Synthetic Enamel Paints -Two coats -for new Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.

"Supply & Installation of FIH Global Certified Hockey Turf from FIH Preferred Manufacturer having pile height of 13mm both recommended for water or sand dressed hockey international tournaments and national level tournaments, should have following specifications; Composition PE, Structure Monofilament curl, Dtex PE8000, Tape thickness 130μm±15μm, Tape width 0.8- 1.0mm, Pile height 13mm±1mm, Gauge 3/16 inch, Stitches per 10cm 34±1, Stitches per m2 71400 ±100, Total yarn weight 1860g/sqm ±10%, Primary backing ""PP + polyester fiber short-staple +, Mesh scrim inlay"", Secondary backing Latex, Total carpet weight 3100g/sqm ±10% Installation of Turf should be done using a seam tape & suitable PU adhesive. Adhesive TDS should match the following basic properties; Colour & Form: Grass-green paste, Characteristics: 2 component polyurethane-reaction adhesive, for outdoor use.(Used for Cricket Practice Net) Specific Gravity: 1480 g/litre., Viscosity: Thixotropic, Solids: 100%., Application: Notched trowel or by suitable machine for applying to Seaming Tape. " With 5 years of Warranty

Supply and installation of nylon fencing using a Nylon Net with a mesh size of 2 inches x 2 inches and a thickness of 2.5mm, ensuring durability and strength. For cricket netting, the mesh size will be 40mm x 40mm with a thickness of 2.5mm, specifically designed for optimal performance and safety. Additionally, the nylon net will be UV-resistant and sourced from Garware

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Mechanical Means

Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage and dewatering charges etc as per SS 20B (ApSS 308) in Ordinary Soil-Mechanial Means-Upto 3M depth

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Construction of Granular sub-base by providing HBG material confirming to Grading - V of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.

Forming embankment with Murram by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Forming embankment with Murram 60%, Sand-30%, Clay Soil-10% by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Plain Cement Concrete M10 (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:3:6) NOMINAL MIX - (Below footings & Flooring bed)

Painting to new walls with 2 coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - acrylic emulsion paint - 2 Coats+1 coat primer

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH

CC Pavers Pathway

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Mechanical Means

Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage and dewatering charges etc as per SS 20B (ApSS 308) in Ordinary Soil-Mechanial Means-Upto 3M depth

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Construction of Granular sub-base by providing HBG material confirming to Grading - V of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Plain Cement Concrete M10 (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:3:6) NOMINAL MIX - (Below footings & Flooring bed)

Painting to new walls with 2 coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - acrylic emulsion paint - 2 Coats+1 coat primer

Supply, Laying and Fixing of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set over a base coat of 50mm thk sand bed including cost and conveyance of all materials like sand, water tiles etc.,to site, labour charges for loading & unloading, laying to desired lines and levels complete and Overheads & Contractor Profit etc. for finished item of work.

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH

Site Clearance, Filling, Compacting and Leveling for Play Ground

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Manual Means

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle) By Mechanical Means

Loosening, Leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted with vibrated Roller by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 MORD / 305 MORTH.

Construction of Granular sub-base by providing HBG material confirming to Grading - V of MoRT&H Table 400-1 including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.

Forming embankment with Murram by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Forming embankment with Murram 60%, Sand-30%, Clay Soil-10% by mechanical means with all leads and lifts with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m. (Payment will be made based on level for finished item of work).

Under Ground Sump

Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage and dewatering charges etc as per SS 20B (ApSS 308) in Ordinary Soil-Mechanial Means-Upto 3M depth

Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66

Rcc Wall 200mm Thk

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Plastering 12mm thick for internal walls using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work BLD-CSTN 10-25 P.No.71

Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage and dewatering charges etc as per SS 20B (ApSS 308) in Ordinary Soil-Mechanial Means-Upto 3M depth

Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66

Rcc Wall 200mm Thk

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Plastering 12mm thick for internal walls using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work BLD-CSTN 10-25 P.No.71

Toilet Block-Male and Female(including child feeding room)

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle)

Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls.

Brick Masonry work in CM (1:6) proportion with manufactured Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - 290 x 225 x 140 mm using flyash of 80kgs, cement of 15kgs. Gypsum of 5kgs. And stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not less than 75kg/sqm for walls for Superstructure walls.

Reinforced Masonry for partition walls (100 mm thick) in CM (1:6) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., but excluding cost of steel and its fabrication charges complete for finished item of work.

Plastering 12mm thick for internal walls using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Plastering with CM 2 coats for external wall, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work BLD-CSTN 10-25 P.No.71

Flooring with Non-skid red or white full body Ceramic floor tiles of size 600 x 600 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)

Dadooing to walls withglazed red or white full body ceramic wall tiles of Size 300 x 600 mm and thickness between 6-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.

Flooring with Anti - skid Granite (Black) 18-20 mm thick upto 2.43M (For Stair case) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)

Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same and over heads &contractor profit etc.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls

Painting to new walls with 1 coat of plastic primer emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - excluding cost of access scaffolding.

Painting to new walls with 1 coat of plastic emulsion primer paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for External walls

Painting to new walls with 2 coats of acrylic emulsion paint weather proof water based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound) content lessthan 50grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 2 Coats.

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting with Red Oxide Primer Paint - one coat and Synthetic Enamel Paints -Two coats -for new Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.

Providing & fixing 30 mm thick solidpanel PVC door shutter consisting of frame madeout of 19guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mmthick heat moulded PVC “C” channel ofsize of 30 x 50 mmforming stiles, 5mmthick75mmwidePVCsheetfortop, lock & bottom rail on either side20mm wide cross PVC sheet as gap insert for top & bottom rail, panelling of 10mm (+/-) (5mm+5mm)” thick PVC sheet fitted in the M.S. frame welded/sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5mm thick PVC strip of 20 mm width stuck on the interior side of the Channel using solvent cement, complete as per direction of Engineer–in–charge, manufacturers specification.

SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT): Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-in-charge.

Supplying and fixing of Fixed Louvered Ventilators made of pre -painted steel(base steel as per IS 513 of -0.58 mm thick'D"quality,galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick,finish painted with a polyester paint of 12-16 microns thick and back coated with 57 microns thick alkyd backer,The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pin head glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket. corner brackets made of CRCA with Zinc Phosphate.The frames to be fixed to the concrete /masonry wall by means of self expanding screws including10mm square guard bars with 6"pitch complete for finished itemofwork. Ventilators:Fixedlouvers4'-0"x2'0"(1219.2 x 609.6 mm) (Box section) outer frame section size of 33x56mm Mullion section size of 33x56mm

supply and installation of High Pressure Laminate (HPL) toilet cubicles using 12mm thick panels, made from phenolic resins under high pressure. These panels have a density greater than 1.40 kg/cm³, water absorption below 0.60–0.8%, and are resistant to heat, bacteria, chemicals, scratches, and impacts, meeting IS-2046 and EN438 standards. Each cubicle will be 1200mm (W) x 1500mm (D) x 2000mm (H) with door size of 600mm (W) x 1800mm (H). Urinal Modesty Panels (UMP’s) will also be installed, each measuring 500mm (W) x 900mm (H). SS/Nylon hardware accessories include auto return hinges (3 per door), indicator lock, door knob, coat hook, adjustable legs, and anodized aluminum U, L, H profiles with a top rail. Installation includes adjustable feet with 150mm floor clearance and secure fixing using aluminum U-channels, top rails, and wall fixings.

Retrofitting of existing building

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH. In area of non-thorny jungle (light jungle)

Dismantling Steel Work in all Types of Sections upto a height of 5 m above Plinth Level excluding Cutting of rivet as per Technical Specification Clause 202 MORD / MORTH including stacking of dismantled material with all lifts and lead upto 1000 m.

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them within 100 metre lead.

Through scraping of old plastered surface disposal of unserviceable materials within 100 metres lead. complete fininsh of item of work

Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Brick Masonry work in CM (1:6) proportion with manufactured Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 - 290 x 225 x 140 mm using flyash of 80kgs, cement of 15kgs. Gypsum of 5kgs. And stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not less than 75kg/sqm for walls for Superstructure walls.

Plastering with CM 2 coats for external wall, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work BLD-CSTN 10-25 P.No.71

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707)

Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush on line with plastering.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 600 x 600 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)

Dadooing to walls withglazed red or white full body ceramic wall tiles of Size 300 x 600 mm and thickness between 6-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.

Flooring with Anti - skid Granite (Black) 18-20 mm thick upto 2.43M (For Stair case) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)

Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same and over heads &contractor profit etc.

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls

Painting to new walls with 1 coat of plastic primer emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - excluding cost of access scaffolding.

Painting to new walls with 1 coat of plastic emulsion primer paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for External walls

Painting to new walls with 2 coats of acrylic emulsion paint weather proof water based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound) content lessthan 50grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 2 Coats.

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Roof Truss works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Supply,fabricating and providing Roofing with prepainted galvalume trapezoidal profile roofing sheets with 0.5mm thickness, coating: Alu zinc coating AZ150 GSM tensile strength 550MPA paint coating regular modified polister painting. Painting thickness (top):8x20 microns, (bottom) 5 to 7 microns, sheet width 1.020 , length: maximum 12mts with regular range colours fixed with GI 'J' bolts and nuts 8mm dia complete excluding the cost of purlins , rafters, truses and cost and conveyence of all materials and labour charges for all operations etc., complete for finished item of work

Painting with Red Oxide Primer Paint - one coat and Synthetic Enamel Paints -Two coats -for new Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.

Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast.Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 35 mmthick conforming to IS:2202 with Bothsides Laminate Sheets - Mat Finish: 1 mm thick as per drawing including cost of Stainless Steel fixtures such as 6 Nos. Butt hinges 150mm long, 2 No tower bolt of 300x10mm dia, 1 No. Heavy duty mortise lock 6/7 levers (IS:2209) with PC or CP handles complete set, 2 No.s Vision panel - 200x1200mm toughened glass -12mm thk, 4 Nos. handles of 200 mm size & 2 Nos. Heavy duty door stoppers and 2 nos. rubber bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.0 X 2.1m)

Supplying and fixing of Fixed Louvered Ventilators made of pre -painted steel(base steel as per IS 513 of -0.58 mm thick'D"quality,galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick,finish painted with a polyester paint of 12-16 microns thick and back coated with 57 microns thick alkyd backer,The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pin head glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket. corner brackets made of CRCA with Zinc Phosphate.The frames to be fixed to the concrete /masonry wall by means of self expanding screws including10mm square guard bars with 6"pitch complete for finished itemofwork. Ventilators:Fixedlouvers4'-0"x2'0"(1219.2 x 609.6 mm) (Box section) outer frame section size of 33x56mm Mullion section size of 33x56mm

Providing and fixing factory made uPVC any colour casement/casementcum fixed glazed windows comprising of uPVC multichambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame47 x 50mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. ( Area of window up to 2.50 sqm).

Supply and installation of Wayfinding Signage Board of Free Standing Height Upto 6 ft, Aluminum Frame and Acrylic Rectangular Board f 2 - 5 mm thick cost of all incidental and operational, labour charges etc., complete for finished item of work.

SUPPLY AND FIXING OF GRANITE SEATING BENCHES MADE FROM DURABLE, WEATHER RESISTANT GRANITE (E.G., BLACK GALAXY, MOON WHITE OR JHANSI RED), WITH A SEATING HEIGHT OF 0.5 M AND AN OVERALL HEIGHT OF 1.8 M INCLUDING THE BACKREST. THE SEAT SLAB (75 MM THICK) AND BACKREST SLAB (50–75 MM THICK) SHALL HAVE A POLISHED OR HONED SLIP RESISTANT FINISH WITH CHAMFERED EDGES FOR SAFETY. BENCH DEPTH WILL BE 0.45–0.5 M AND LENGTH 1.5–2.0 M. SUPPORTS, EITHER SOLID GRANITE OR RCC CLAD WITH GRANITE, SHALL BE SPACED AT ~1.2 M INTERVALS AND FIXED OVER PCC (M15) FOUNDATIONS 300–500 MM DEEP. ALL SLABS SHALL BE SECURELY ANCHORED USING 12 MM DIA STAINLESS STEEL DOWELS WITH RESIN MORTAR AND CONCEALED BRACKETS. THE BACKREST SHALL HAVE A ~15° INCLINATION FOR ERGONOMIC COMFORT. ALL JOINTS SHALL BE ≤2 MM WIDE AND FILLED WITH COLOR MATCHED NON-SHRINK GROUT. THE RATE INCLUDES COMPLETE SUPPLY, TRANSPORTATION, HANDLING, AND FIXING IN POSITION WITH ALL NECESSARY TOOLS, MATERIALS, AND LABOR. OPTIONAL PROVISIONS INCLUDE ARMRESTS, ENGRAVING, AND DRAINAGE GROOVES. ROUTINE MAINTENANCE INCLUDES MILD CLEANING AND PERIODIC SEALING

Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Manufacture,supply,delivery and fixing of Mild Steel Tubes & pipes of all diameters as per IS-1161 for Railing works like MS Hallow Sections etc, made with MS Structural Steel, i.e. Circular, Square Hallow Sections etc including welding , finishing etc complete unit 1.00 kgs.

Painting with Red Oxide Primer Paint - one coat and Synthetic Enamel Paints -Two coats -for new Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.

Toilet Electrical Works

Supply and laying of following size ISI …….. outer dia medium grade with IS:9537 part 3 FRLS regid PVC pipe,concealed in wall with PVC deep Junction Boxes confirms to IS : 3419, PVC Bends including required accessories complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/ AKG/Beljin

25mm (1.80 mm thickness)

32mm (2.10 mm thickness)

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box and front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Primary Light Point)

Secondary Light Point Supply and fixing of ceiling rose for secondary light point (conduit and wire is extra) complete

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box a nd front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Fan Point)

Supply and fixing of 1 no. 6A 3 pin modular socket with 1 no. 6A modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Separate switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Supply and Fixing of 16A 2Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ] Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Supply and run of 1 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 1 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 56/0.3mm (4.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 2 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and fixing of distribution board Protection suitable for IP43, S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way SPN Distribution board 40A DP MCB 10KA 1 Nos as incomer and 8Nos 6-32A SP MCB's 10KA as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 4way TPN Distribution board 63A 4P MCB 1Nos as incomer and 12Nos 6-32A SP MCB's as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way TPN Distribution board 63A 4P MCB 1Nos as incomer and 24Nos 6-32A SP MCB's as outgoers

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I. a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight.

Supply of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser with IP 65 Protection etc., complete., Makes : Philips/Bajaj / Crompton / Surya / Havells / Greenlites/ Insta Power/HPL /Halonix/ Panasonic.

Supply and Transportation of 36W, 2' x2' (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete with 5 years warranty. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready / FortuneArrt// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Supply ,installation testing comissioning of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200cubic meter/min but without Regulator. Makes : Crompton / Bajaj Kassels 50 / Usha atom

Supply ,installation testing comissioning of 12' (300mm) Light duty exhaust fan with wire guard Completely nuts and bolts and 23/0060 Twin core wire including all labour charges etc.,complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orienthill air.

Retrofitting building Electrical Works

Supply and laying of following size ISI …….. outer dia medium grade with IS:9537 part 3 FRLS regid PVC pipe,concealed in wall with PVC deep Junction Boxes confirms to IS : 3419, PVC Bends including required accessories complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/ AKG/Beljin

25mm (1.80 mm thickness)

32mm (2.10 mm thickness)

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box and front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Primary Light Point)

Secondary Light Point Supply and fixing of ceiling rose for secondary light point (conduit and wire is extra) complete

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) for Phase, Neutral and Earth in existing pipe with 6A switch, Ceiling rose and Module box a nd front plate covering to switch control box including all labour charges etc. , complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. (Fan Point)

Supply and fixing of 1 no. 6A 3 pin modular socket with 1 no. 6A modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Separate switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Supply and Fixing of 16A 2Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ] Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.

Supply and run of 1 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (1.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 1 of (2.5 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 56/0.3mm (4.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 1 of 56/0.3mm (4.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour

Supply and run of 2 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 84/0.3mm (6.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 2 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and run of 1 of 140/0.3mm (10.0 sq.mm.) FR PVC insulated flexible copper wire in the existing conduit pipe for power points including labour charges etc. complete.

Supply and fixing of distribution board Protection suitable for IP43, S.P out goings and for 1 No Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way SPN Distribution board 40A DP MCB 10KA 1 Nos as incomer and 8Nos 6-32A SP MCB's 10KA as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 4way TPN Distribution board 63A 4P MCB 1Nos as incomer and 12Nos 6-32A SP MCB's as outgoers

Supply of fixing of distribution board Protection suitable for IP43 S.P. out goings and for 1 No 4 pole Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3. . Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro. 8way TPN Distribution board 63A 4P MCB 1Nos as incomer and 24Nos 6-32A SP MCB's as outgoers

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I. a) LUMINAIRE MAKE : Phillips / GE- Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/ Everlight.

Supply of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser with IP 65 Protection etc., complete., Makes : Philips/Bajaj / Crompton / Surya / Havells / Greenlites/ Insta Power/HPL /Halonix/ Panasonic.

Supply and Transportation of 36W, 2' x2' (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete with 5 years warranty. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready / FortuneArrt// Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight.

Supply ,installation testing comissioning of 48" (1200mm) Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings, power input not more than 50W , air delivery more than 200cubic meter/min but without Regulator. Makes : Crompton / Bajaj Kassels 50 / Usha atom

Supply ,installation testing comissioning of 12' (300mm) Light duty exhaust fan with wire guard Completely nuts and bolts and 23/0060 Twin core wire including all labour charges etc.,complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orienthill air.

EXTERNAL ELECTRICAL WORKS

Supply Transportation and unloading the RS Joist of 9.0 mtr long 175mm x 85mm size at site in good condition for H.T. / L.T. lines support including cost and conveyance of all materials and labour charges etc., complete. as per EB drawing and approval.

Supply and erection of GI stay set of dia 20mm,2.4 mtr long stay rod and anchor plate 380mmx380mmx6.4mm including stay clamps, turn buckle and GI stay wire tight end through strain insulator including excavation of pit and cc work etc., complete as per EB drawing and approval.

Supply and fixing of 11KV -V- cross arms with 75x40 mm MS channel including 4 nos 50 x 50 x6 mm packing plates (9 Kgs) duly welded with necessary clamping arrangements etc., complete as per EB drawing and approval.

Supply and fixing of 11 KV danger plates on the existing poles with necessary clamping arrangements etc., complete as per EB drawing and approval.

Supply and erecting 7/2.50 AAAC / Weasel (34 Sq.mm) conductor for Overhead line with stringing, binding and suitable size of clamps for Jumpering etc., complete. as per EB drawing and approval.

Supply and erecting approved make 11KV, 5KA metal oxide lightning arrestors suitable for 11 KV supply with necessary materials on existing cross arm complete. as per EB drawing and approval.

Supply and erecting porcelain pin type insulator suitable for 11KV line with suitable hardware on existing cross arms. complete. as per EB drawing and approval.

Supply and fixing of 11 KV ,400 A 3 phase central post rotating double break type AB switch(isolator) as per IS 9921) without earth blade, gang operated, Horizontal type, operating mechanism with GI spring loaded reverse loop type fixed contact, solid HD electrolytic copper tubular moving contact with silver/Nickel plated at end points,9 Nos post insulators of 12 KV (IS 2594 and IS 5350) ,Hot Dip galvanizing hardware, GI pipe, Nuts and bolts etc., complete., as per EB drawing and approval.

Supply and erecting 11KV, H.G (Horn Gap) fuse set including all standard accessories etc., complete with cost and conveyance of all materials and labour charges complete., as per EB drawing and approval.

LOAD BREAK SWITCH Supply, Transportation, Installation and Commissioning of 11 KV, 630A, 25 KA Outdoor type Load Break Switch as detailed below with suitable CC foundation and 2 Nos GI pipe earthing with brick masonry chambers etc., complete for finished item of work. Makes:Make:ABB/ Megawin/Amara Raja/L&T. a) Load break switch: 11KV,630A, 25 KA with fuse trip, earth switch, manually operated spring charged mechanism with 2 no + 2 NC. b) HT HRC fuse upto 63A - 3 nos. c) Bus bar connection. d) Indication lamps. e) Manual trip Push button.

Supply and Transportation of XLPE insulated IS:7098/II/85 H.T. 3C, 120Sqmm cable for working voltage 11 KV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanized flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc., complete. [Make: Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/RR Kabel/RPG].

Supply and erecting of heat shrinkable Outdoor termination kit for 11KV XLPE HT cable 3 core 120 Sqmm with Anti Tracking red colour material,with required components, prepration of cable ends, testing etc. as etc., complete Makes: Raychem / M Seal / Denson / Multy / Transeal - Hongshang.

Supply and erecting of heat shrinkable Indoor termination kit for 11KV XLPE HT cable 3 core 120 Sqmm with Anti Tracking red colour material with required components, prepration of cable ends, testing etc. as etc., complete Makes: Raychem / M Seal / Denson / Multy / Transeal - Hongshang.

Supply, Transportation, Installation, Testing and Commissioning of 11/0.433 KV TRANSFORMER with all test reports. The Transformer shall be designed and manufactured as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II) with latest ammended and as per IS 1180 Part-I : 2014 latest ammended, OCTC with initial filling of oil as per IS 335-1993. The basic details of the Transformer are as under. Makes : As per list of recommended brands as category I.

1. Rated KVA : 100KVA 2. Service: Outdoor / Indoor 3. Mounting : Plinth. 4. Copper wound : Double. 5. Type : Core. 6. Cooling : ONAN 7. Temp . Rise : 55⁰C. 8. Vector Group: Dyn 11 9. Primary Connection : Delta 10. Primary Volts : 11000 11. Primry Frequency : 50 12.Primary Phases : 3 13. Primary wires: 3 14. Secondary connection : Star 15. Secondary Volts : 415 / 433V 16. Secondary phases : 3 17. Secondary wires: 4 18. Taps on primary winding for primary voltage variation : +7.5% to - 7.5% in steps of 2.5%,

19. Terminal arrangement. a. HV: Bare Busings / Cable end box b. LV : Cable box 20. LV : One separate terminal for earthing. 21. Impedance(Z%) : .............As per IS specification

22. Fittings & Accessories. a. Rating and terminal marking plate b. Earthing terminals c. Lifting Lugs d. Conservator with drain plug. e. Oil level Indicator f. Dehydrating silicagel breather g. Air release device h. Drain cum filter wall i. Explosion vent with diaphragm j. Radiators (Attachable) k. Seperate neutral bushing l. Uni directional flat rollers. ALL AS PER SITE & CLIENT REQUIREMENT AND APPROVAL ONLY

APFCR Panel 80KVAR Fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard APCR panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat. Fuses shall be provided for Control purposes (All Panels shall be extendable type only). (Makes: L&T/ ABB)

Supply Installation Testing and commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/ switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure (only outer area on all sides shall be measured and panel to be abricated from CPRI approved fabricator).

Supply and fixing of MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity… with thermal magnetic release panel mounted. 160A,3P,50KA MCCB-1Nos,

50KVAR Capacitor banks-, 20KVAR Capacitor banks- 2 Nos 10KVAR Capacitor banks-3 Nos, 5KVAR Capacitor banks-1 Nos, 2.5KVAR Capacitor banks-2 Nos, and suitable Capacitor duty power contactors Supply and fixing of MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity… with thermal magnetic release panel mounted. 125A 35KA TP MCCB-Nos, 63A 25KA TP MCCB- 2 Nos, 32A 25KA TP MCCB-6 Nos, 14 stage sensitivity up to 50 milli Amp APFC realy with suitable capacitor duty power contactors and LED Phase Indication lamps, 500A aluminium busbars of required size.

FEEDER PILLAR PANEL Supply, fabrication, installation, testing and commissioning of cubicle type front operated, MV switchboard panel, dust and vermin proof cubicle chamber for mounting and suitable for 415 V, 50 Hz, AC supply including supply and erection of all switchgears. Panel fabricated with 14 SWG CRCA sheet steel enclosure,16 SWG CRCA Sheet steel for internal partitions including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel of required colour paint, suitable Aluminum busbars, SMC/DMC etc.,as required including labour charges etc complete . The panel shall be mounted on U channels grouted to the floor including all materials. All the PCC/ Panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2Nos GI flats of adequate size to the main earth bus of 25 x 6mm GI flat.. Fuses shall be provided for Control purposes (All Panels shall be extendable type MCCB MAKE: L&T ( DSINE), ABB(TMAX)

Supply and fixing of MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity… with thermal magnetic release panel mounted. 125A 25KA 4Pole MCCB - 1 Nos, Multi function meter with CT 125/5A , class I

40A -63A10KA 3P MCB - 6 Nos

32A 10KA 4P MCB - 4 Nos

TIMER & CONTACTOR

LED Phase Indication lamps, 200A Aluminium busbars of reuqired size. Dual source meter for EB & DB metering

Supply and laying of the following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) 1554-1, including laying in existing cable trench as per specifications etc complete as required. [Makes: Polycab / RPG / Finolex / Havells]

3.5 Core 240 Sqmm alluminium cable

3.5 Core 95 Sqmm alluminium cable

3.5 Core 50 Sqmm alluminium cable

3.5 Core 25 Sqmm alluminium cable

4 Core 16 Sqmm alluminium cable

4 Core 10 Sqmm alluminium cable

4 Core 6 Sqmm alluminium cable

3 Core 10 Sqmm Copper cable

3 Core 6 Sqmm Copper cable

3 Core 4 Sqmm Copper cable

3 Core 2.5 Sqmm Copper cable

3 Core 1.5 Sqmm Copper cable

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI

3.5 Core 240 Sqmm alluminium cable

3.5 Core 95 Sqmm alluminium cable

3.5 Core 50 Sqmm alluminium cable

4 Core 16 Sqmm alluminium cable

4 Core 10 Sqmm alluminium cable

4 Core 6 Sqmm alluminium cable

3 Core 10 Sqmm Copper cable

3 Core 6 Sqmm Copper cable

3 Core 4 Sqmm Copper cable

3 Core 2.5 Sqmm Copper cable

3 Core 1.5 Sqmm Copper cable

Supply and making end termination with heavy Aluminum lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc., of following size: Makes:Dowels/Comet/SMI

3.5 Core 240 Sqmm alluminium cable

3.5 Core 95 Sqmm alluminium cable

3.5 Core 50 Sqmm alluminium cable

4 Core 16 Sqmm alluminium cable

4 Core 10 Sqmm alluminium cable

4 Core 6 Sqmm alluminium cable

3 Core 10 Sqmm Copper cable

3 Core 6 Sqmm Copper cable

3 Core 4 Sqmm Copper cable

3 Core 2.5 Sqmm Copper cable

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in brick masonry (CM 1:3) Chamber of 400mmx 400m x 400mm with suitable cast iron cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 0.3mtr. length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including brick masonry (CM 1:3) Chamber of size 400m x 400m x 400mm covered with suitable cast iron Slab filling with salt and charcoal giving earth connection from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).

Providing independent CI earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply,erection,testing and commissioning of following sizes of copper strip on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required.

32 x 6mm Copper strip

Supply ,erection ,testing and commissioning of following G.I. Strip/G.I. wire on surface or in recess for connections including cost of all accessories and labour charges etc., complete as required.

25x3mm GI strip

25x6mm GI strip

Supply,erection and commisioning of cable route marker with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) of size 60cm x 60cm at the bottom and 50cm x 50cm at the top with a thickness of 10 cm including inscription duly engraved as required.

Supply, fabricating , installing structural steel supports for fixing of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting for HT yard structure and exhaust pipe supports in DG set.

Supply , laying and fixing of following RCC hume pipe NP2 class in ground complete with RCC collars, jointing with cement mortar 1:2( 1 cement : 2 fine sand) etc including labour charges etc complete as required.

300mm dia NP2 RCC Hume pipe

150mm dia NP2 RCC Hume pipe

Supply and laying of 100 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors for entry of cable at road crossing and central wedge of road at a depth of 900.00 mm wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete.

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) wherever necessary and at culvert crossings wherever necessary including cost and conveyance of all accessories and labour charges etc., complete.

Earth work excacvation including all soils for trench,

Supply and providing the following materials at site including cost of all accessories and labour charges etc., complete as required.

First aid box 18"x12"x8"

Danger Board in 3 languages English/Telugu/Hindi in red colour with 11KV marks shall comply with IS:2551-1982. 250x200mm,

Danger Board in 3 languages English/Telugu/Hindi in red colour with 440V marks shall comply with IS:2551-1982. 250x200mm,

Shock instrution chart in English / Hindi / Telugu duly framed with front glass

Street Lights and Highmast Poles

Supply,fabrication ,transportation and erection of 12 Mtrs Polygon High Mast with single section of 3mm thick of bottom 360mm and top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, and GI Pipe ring suitable for fixing luminaires with LED type aviation twin lamp. Makes: As per list of recommended brands. Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din channel, bus bars, 6 Sq mm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. Makes: As per list of recommended brands. Earth work excavation with an approximate quantity of 4.0 Cum for erection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erection of High Mast and carriage etc complete.

Supply, transportation and erection of 200w LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K,minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/Polycab/Keselec/HPL/Jaquar/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Supply,fabrication ,transportation and erection of 7.5 mts long with 1 Mtr length decorative Single arm bracket made with MS galvanized 40mm/50mm dia pipe and MS BOX with all accessories as per the requirements at site and as per the directions of the field engineers

Supply and fixing of 60W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 95 lm/W and junction temprature < 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection ≥ 5KV with optics istribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete a) LUMINAIRE MAKE : WIPRO / PHILIPS (GREEN LINE) / Lighting Technologies (Adornis) / SCHREDER (BRIKA) / GE / VIN (MATRIX) / CROMPTON (HAWK) / BAJAJ (EDGE+) / HALONIX (LUMOS - SUPER) / HAVELLS (ENDURA CITYLINER NEO) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG

Supply, transportation and erection of 60w LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, external Surge protection ≥10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K,minimum CRI>70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj /Greenlites / Havells/Capart(Premium) /Halonix/Polycab/Keselec/HPL/Jaquar/Eveready b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

Supply and Transportation and erecting of 40W LED Post top lantern made with cast Alluminium with decorative opel polycarbonate diffuser with IP 65 protection etc., complete with all accessories Makes: Crompton LPTO-40-CDL-M/ Bajaj Celesta BGCL 40 W LED Wh/Wipro LP 02 or equivalent in Phillips/ Keselec/ Havells/ Halonix

Supply, transportation and Installation of Supply of 10W LED Bulk head fitting with Pressure die cast alluminum with opal diffuser. Makes : Bajaj / Crompton / Surya / VIN / Havells / Green Lights / Insta Power.

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe ,couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely.The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,

Drilling of Bore well 350/450mm dia for insertion of pipe dia of 160/175/200 mm

Supply and Fixing of PVC Bore cap including cost and conveyance of all materials and labour charges, all operational and incidental charges and excluding all taxes etc complete.

180mm Dia Bore Cap

Slotting charges for 175 / 180mm dia PVC casing pipe excluding all taxes etc., complete.

Perforation charges for 180 mm dia PVC casing pipe excluding all taxes etc., complete.

Supply and fixing of 175mm dia 6 kgs/sqm PVC casing pipe including cost and conveyance of all materials to site and all labour charges etc., complete for finished item of work

Supply of 90mm OD PE 80 Grade material 8 kg / Cm2 ISI Mark HDPE pipe upto 600 feet Makes : Sudhakar / Reliance / Duroline / Premier / Vijaya / Godavari.

Supply and run of 3 Core 2.5 Sqmm Flat Copper cable as per IS 694:1990 for Submersible Motors. Makes: V-Guard / Gold Medal / GM / Million / Vihan/Vimal /Finecab/ CRI/ Lubi/Hitech/ Airson/Ollvin

Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T /Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes : As per list of recommended brands . Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor

Upto 7.5 HP with DOL Starter of.

Supply, Transportation and erecting of 5.00HP 25 Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha

Toilet Sanitary & Plumbing Works

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour as directed by Engineer-in-charge.

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated complete including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying & Fixing Indian makeFlat Back Wash Hand Basin jaquar/Equavalent make 1st quality conforming to IS:2556-Part-4:1972 of 560x430x185mm ,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty 31.75mm dia PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Wall Mixer with provision for overhead shower and 115mm long bend pipe with wall flange Jaquar make Continental series, Chrome finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of 12.7 mm dia NP push cock Ist quality Jaquar Continental series, Chrome Finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Angular stopcock with wall flange Jaquar Continental series, Chrome finish with 7 years warranty. (Make: Jaquar, Model: 5053) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Double coat hook Jaquar make Continental series, Chrome finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Rack with Lower Hanger (Stainless Steel) with hook Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1581H of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Ring Round Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AQN-CHR-7721 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Grab Bar (Stainless Steel) 450mm Long Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1503 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 years warranty: Chrome plated including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Tumbler Holder for Soap Dispenser with Glass bottle Jaquar make Continental series, Chrome Finish with 7 years warranty (CAT No. AKP-CHR-35735P of Jaquar). including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 590 x 375 x 390 mm of Ist quality including cost and conveyance of all materials, overheads and contractor's profit etc. complete for finished item of work in all respects.

supply and fixing of 8mm thick thougned galss partions of size 4'0''x 2'0'' with etching the glass including fixing at site for urinals including full rounding the edges fixing in poisition,including cost and conveyance of all materials and labour charges,overheads and contractors profit complete for finished item of work for all floors

Supplying and fixingTV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, etc. overhead & contractor's profit complete for finished item of work in all floors as directed by Engineer-in-charge.

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supplying, fixing and testing PVC soil, waste and vent pipes (SWR) confirming to IS13592 :1990, type B with Solvent Cement joint inclusive of all necessary specials like bends, tees, offsets, door ends, junctions, cowls, etc., laid under floor/fixed on walls,and in pipe shafts etc., complete.The quoted rate should include necessary MS supports like hanger supports, grip bolts and clamps etc., including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

a) PVC soil, waste and vent pipes 160mm dia - 6Kg/Sq cm

b) PVC soil, waste and vent pipes 110mm dia - 6Kg/Sq cm

c) PVC soil, waste and vent pipes 75 mm dia - 6Kg/Sq cm

Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practicefor nominal dia 75 mm (3") and grating size 100 mm dia of weight not less than 4.0 Kgs including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying, fixing, testing and commissionig of approved make PVC vent cowl with necessary accessories etc., complete.

Supplying & fixing 150 mm x 100 mm SWG gully trapsconforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Supplying, installing, testing and commissionig of R.C.C Plain end pipe NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe with all leads and lifts, making necessary connections as required etc., complete. (Provision for road crossings)

Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors

Supplying & Fixing of PVC/SWR Plain Bend of 110 mm dia

Supplying& Fixing of PVC/SWR Door Bend of 110 mm dia

Supplying & Fixing of PVC/SWR 45 degree Bend of 110 mm dia

Supplying & Fixing of PVC/SWR Single Tee of 110 mm dia.

Supplying & Fixing of PVC/SWR Single Tee with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Tee of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Tee with door of 110 mm dia

Supplying & Fixing of PVC/SWR Single Y of 110 mm dia.

Supplying & Fixing of PVC/SWR Single Y with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Y of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Y with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Coupler of 110 mm dia.

Supplying & Fixing of PVC/SWR Vent Cowl of 110 mm dia.

Supplying & Fixing of PVC/SWR Reducer of 110 dia.

Supplying & Fixing of PVC/SWR Pipe clip of 110 mm dia.

Supplying & Fixing of PVC/SWR P-Trap(big with air vent) of 110 mm dia.

Supplying & Fixing of PVC/SWR Floor-Trap(Bell mouth) of 110 mm dia.

Supplying & Fixing of PVC/SWR Plain Bend of dia 75 mm

Supplying & Fixing of PVC/SWR Door Bend of dia 75 mm

Supplying & Fixing of PVC/SWR 45 degree Bend of dia 75 mm

Supplying & Fixing of PVC/SWR Single Tee of dia 75 mm

Supplying & Fixing of PVC/SWR Single Tee with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Double Tee of dia 75 mm

Supplying & Fixing of PVC/SWR Double Tee with door of dia 75 mm

Supplying & Fixing of PVC/SWR Single Y of dia 75 mm

Supplying & Fixing of PVC/SWR Single Y with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Double Y of dia 75 mm

Supplying & Fixing of PVC/SWR Double Y with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Coupler of dia 75 mm

Supplying & Fixing of PVC/SWR Vent Cowl of dia 75 mm

Supplying & Fixing of PVC/SWR Pipe Clip of dia 75 mm

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge.

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

25 mm dia (Screwed ends)

32 mm dia (Screwed ends)

40 mm dia (Screwed ends)

Supplying, installing, testing and commissioning CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU-G/Honeywell

Supplying and lying P.C.C support blocks of 1:2:4 concrete mix of sizes as given below for pipe supports on the terrace complete.

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. for Rigid PVC rain water pipes conforming to IS 13592 - 1992 (Type A) with all fittings like shoes, bends fixed in the pipe shafts (ducts) with suitable supports etc., complete.(for RWP & balcony drainage)

Retrofitting building Plumbing Works

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour as directed by Engineer-in-charge.

Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook ofJaquar make queen series with 7 years warranty Chrome plated complete including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying & Fixing Indian makeFlat Back Wash Hand Basin jaquar/Equavalent make 1st quality conforming to IS:2556-Part-4:1972 of 560x430x185mm ,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty 31.75mm dia PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of 12.7 mm dia NP push cock Ist quality Jaquar Continental series, Chrome Finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Angular stopcock with wall flange Jaquar Continental series, Chrome finish with 7 years warranty. (Make: Jaquar, Model: 5053) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Double coat hook Jaquar make Continental series, Chrome finish with 7 years warranty including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Rack with Lower Hanger (Stainless Steel) with hook Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1581H of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Towel Ring Round Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AQN-CHR-7721 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing of Grab Bar (Stainless Steel) 450mm Long Jaquar make Continental series, Chrome finish with 7 years warranty (CAT No. AHS-CHR-1503 of Jaquar continental Range) including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 years warranty: Chrome plated including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supply & Fixing Tumbler Holder for Soap Dispenser with Glass bottle Jaquar make Continental series, Chrome Finish with 7 years warranty (CAT No. AKP-CHR-35735P of Jaquar). including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying and fixingTV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, etc. overhead & contractor's profit complete for finished item of work in all floors as directed by Engineer-in-charge.

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supplying, fixing and testing PVC soil, waste and vent pipes (SWR) confirming to IS13592 :1990, type B with Solvent Cement joint inclusive of all necessary specials like bends, tees, offsets, door ends, junctions, cowls, etc., laid under floor/fixed on walls,and in pipe shafts etc., complete.The quoted rate should include necessary MS supports like hanger supports, grip bolts and clamps etc., including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

a) PVC soil, waste and vent pipes 160mm dia - 6Kg/Sq cm

b) PVC soil, waste and vent pipes 110mm dia - 6Kg/Sq cm

c) PVC soil, waste and vent pipes 75 mm dia - 6Kg/Sq cm

Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practicefor nominal dia 75 mm (3") and grating size 100 mm dia of weight not less than 4.0 Kgs including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Supplying, fixing, testing and commissionig of approved make PVC vent cowl with necessary accessories etc., complete.

Supplying & fixing 150 mm x 100 mm SWG gully trapsconforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover including cost and conveyance of all materials to site ,labour charges,overhead & contractors profit for finished item of work as directed by Engineer-in-charge.

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Supplying, installing, testing and commissionig of R.C.C Plain end pipe NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe with all leads and lifts, making necessary connections as required etc., complete. (Provision for road crossings)

Supplying and fixing of following PVC/SWR. Specials of ISI marked of approved make and fixing as per site requirements including all labour charges, all taxes etc,. complete for finished item of work as directed by the Engineer-In- Charge. - Concealed in Floors

Supplying & Fixing of PVC/SWR Plain Bend of 110 mm dia

Supplying& Fixing of PVC/SWR Door Bend of 110 mm dia

Supplying of PVC/SWR 45 degree Bend of 110 mm dia

Supplying & Fixing of PVC/SWR Single Tee of 110 mm dia.

Supplying & Fixing of PVC/SWR Single Tee with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Tee of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Tee with door of 110 mm dia

Supplying & Fixing of PVC/SWR Single Y of 110 mm dia.

Supplying & Fixing of PVC/SWR Single Y with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Y of 110 mm dia.

Supplying & Fixing of PVC/SWR Double Y with door of 110 mm dia.

Supplying & Fixing of PVC/SWR Coupler of 110 mm dia.

Supplying & Fixing of PVC/SWR Vent Cowl of 110 mm dia.

Supplying & Fixing of PVC/SWR Reducer of 110 dia.

Supplying & Fixing of PVC/SWR Pipe clip of 110 mm dia.

Supplying & Fixing of PVC/SWR P-Trap(big with air vent) of 110 mm dia.

Supplying & Fixing of PVC/SWR Floor-Trap(Bell mouth) of 110 mm dia.

Supplying & Fixing of PVC/SWR Plain Bend of dia 75 mm

Supplying & Fixing of PVC/SWR Door Bend of dia 75 mm

Supplying & Fixing of PVC/SWR 45 degree Bend of dia 75 mm

Supplying & Fixing of PVC/SWR Single Tee of dia 75 mm

Supplying & Fixing of PVC/SWR Single Tee with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Double Tee of dia 75 mm

Supplying & Fixing of PVC/SWR Double Tee with door of dia 75 mm

Supplying & Fixing of PVC/SWR Single Y of dia 75 mm

Supplying & Fixing of PVC/SWR Single Y with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Double Y of dia 75 mm

Supplying & Fixing of PVC/SWR Double Y with Door of dia 75 mm

Supplying & Fixing of PVC/SWR Coupler of dia 75 mm

Supplying & Fixing of PVC/SWR Vent Cowl of dia 75 mm

Supplying & Fixing of PVC/SWR Pipe Clip of dia 75 mm

S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge.

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

b) 25 mm dia (Screwed ends)

c) 32 mm dia (Screwed ends)

d) 40 mm dia (Screwed ends)

Supplying, installing, testing and commissioning CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU-G/Honeywell

Supplying and lying P.C.C support blocks of 1:2:4 concrete mix of sizes as given below for pipe supports on the terrace complete.

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. for Rigid PVC rain water pipes conforming to IS 13592 - 1992 (Type A) with all fittings like shoes, bends fixed in the pipe shafts (ducts) with suitable supports etc., complete.(for RWP & balcony drainage)

External Water Supply Works

S&F premium make HDPE Pipes conforming to IS 4984 - 2016 including the cost of pipe & labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge. PN6

S&F premium make HDPE Pipes conforming to IS 4984 - 2016 including the cost of pipe & labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge.

PIPE ENDS LONG NECK

140mm x 160mm dia

125mm x 140mm dia

110mm x 125mm dia

Supplying, installing, testing and commissioning CI Wafer Lug type Butterfly Valves conforming to IS 13095/1991 (Reaffirmed 1998) excluding transportation, CED and taxes etc., complete. Operation done with worm actuator ISI marked Rate at Ex-Factory Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto /SANT/NEU-G/Honeywell

Supplying and lying P.C.C support blocks of 1:2:4 concrete mix of sizes as given below for pipe supports on the terrace complete.

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Supplying, installing, testing and commissionig of R.C.C Plain end pipe NP2 class Hume pipe laid to the required level and grade with collars joining in CM 1:3 and filling the excavated trench with approved quality saturateds and on sides, bottom and top surface of pipe with all leads and lifts, making necessary connections as required etc., complete. (Provision for road crossings)

Supply, Transportation and erecting of 5.00HP 25 Stage, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50 Hz AC supply,etc complete for 4" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha

Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T /Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes : As per list of recommended brands . Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor

Landscaping Works

Clearing the Medium and Dense Shrub /Besharam / Rubber plants uprooting wild vegetation, grass, bushes,saplings and disposal of unserviceable materials and stacking of serviceable material including removal, disposal and overheads & contractors profit complete for finished item of work

Bed preparation for Dibbling for Bermuda/Doob/ Shade Grass :-Dressing the surface to the desired shape, laying 150 mm (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, compacting to 4" thickness by hand roller including cost of red garden soil, sand and labour charges etc. complete for bed preparation and dibbling rooted slips of grass @2" apart and ramming including slipping of grass, racking the soil before dibbling, watering and ramming complete etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work excluding cost of dibbling grass and fertilizer for 1 sqm Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystaline, porous and friable, fertlie, slightly acidic or neutral

Bed preparation for Korean/Mexican: Dressing the surface to the desired shape, laying of 150 mm. (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, rolling (compacting to 4" thickness by hand roller), including the cost of red garden soil, sand and labour charges etc., for complete bed preparation and laying and ramming of lawn mats / rolls in proper position on existing prepared bed by internal transportation from dumped place, including cost of labour for laying, ramming by hand roller / demesha, internal transportation and watering etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work. excluding cost of grass, fertilizers and chemicals etc., for 1 Sqm (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Hedge / shrub planting: Digging the trench of size 0.3 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 11 No./Sqm of plants & bag size shall be arrived based on the spacing 0.3 c/c as per the design.)(Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Hedge / shrub planting: Digging the trench of size 0.3 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 5 No./Sqm of plants & bag size shall be arrived based on the spacing 0.45 c/c as per the design.)(Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Digging of 0.6x0.6x0.6 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., and it including all operational, incidental, labour charges, required tools, overheads & contractors profit complete for finished item of work. (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt)) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Digging of 0.45x0.45x0.45 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., for complete item of work (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt)) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Maintenance of lawns: Watering 10 to 15 ltrs /per Sqmt/per day basing on season and weather conditions (30 watering is required in a month to maintain sub-soil moisture continuously), application of fertilizers, insecticides, Fungicides (once in a month) by manual excluding cost of fertilizers & water.

Maintenance of groundcover/flower beds: Watering to ground cover (one's in three day's @ 5 litres/per Sqmts shall be provide to maintain sub soil moisture continuously) by manually, excluding cost of wateri ncluding all operational, incidental ,labour charges for complete of work..

Maintenance of Palms/Tree planting: watering (once in three days @ 5 Lts/per plant shall be provide to maintain sub soil moisture continuously) by manually, but excluding cost of water including all operational, incidental ,labour charges for complete of work.

Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground covers and specified plants as per directions of officer in charge at site including cost of plants and conveyance of all materials and labour charges etc., plants of bag size 7" x 8" of plant height not less than 1.0 feet, 8" x 10" of plant height not less than 3.0 feet, 13" x 13" of Tree/Palm height not less than 5 feet, 13" x 13" of plant (Hedges & Shrub) height not less than 2 feet, 15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet, 18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom dia of the stem is 0.75'' and above, 21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7 feet, bottom dia of the stem is 1'' and above. Heights mentioned above are excluding bag height. All the plants supplied shall be with sturdy stem, well formed crown, vigorously growing tip, healthy foliage without any infestation and the plants shall be supplied after proper hardening off. the rates inclusive of cost of plants, loading, transportation to the site, and unloading, labour charges for handling & complete for finished item of work.

For paspalum grass(seeds )

For Korean grass

Buxus sempervirens

Tecomaria capensis

Nerium oleander dwarf white

Ixora coccinea pin

Heliconia american dwarf orange

Dracaena mahatma

veitchia merrilli green

Albizia_Julibrissin

Transportation of paspalum grass & Lawn from kadiyam to guntur (Actual payment will paid for the actual work done subjected to approval of the rates by the competent authority)

Transportation of Bag plants from kadiyum to Guntur (Actual payment will paid for the actual work done subjected to approval of the rates by the competent authority)

Cost of Fertilisers& Pesticides

Compound Wall with 0.9m Ht Brickwork and 0.9m Ht MS grills

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary soils-Mechcanical Means-Upto 3 m depth

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66

Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS for:-Design Mix : M 25(Weigh Batch)

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,cost of excluding seigniorage on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140)

Plastering with CM 2 coats for external wall, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Providing and applying synthetic plaster putty or equivalent putty or texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - including cost of access scaffolding for:-External Colouring - Providing Putty/ Texture to External walls

Painting to new walls with 1 coat of plastic emulsion primer paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for External walls

Painting to new walls with 2 coats of acrylic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - acrylic emulsion paint - 2 Coats

Providing and Fixing Mild Steel, Structural Steel, I.e., Angles, Channels and I sections.of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings to be supplied at the time of execution of work, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental, Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position etc. complete for finished item of work.

Painting to new iron works with 2 coats of synthetic enamel paint of approved brand and shade over 1 coat of red oxide primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Painting to Iron work - Synthetic enamel paint to New Iron Work - 2 coats + 1 coat Iron primer

Compound Wall Fencing of 1.8m ht with MS Hallow Pipe chain link mesh for Transco site

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary soils-Mechcanical Means-Upto 3 m depth

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX

Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Supplying and fixing 1.8m high fencing with Vertical MS Hallow Pipe -80mmx80mm - 3.2mm thk at 3m centre to centre with 0.4m embeded in concrete pedestals with MS Plates - 200x50x4mm and Horizontal on the top and center of the vertical post of MS Hallow Pipe -50mmx50mm - 2mm thk . Corner, end and every 10th post to be strutted. Fixing Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge to posts using flats of size 150mm x 6mm and bolts etc., as per approved drawing, including cost of bolts and brackets, fabrication and erection in position, cost and conveyance of all materials to work site etc., all operational, incidental labour charges, power charges, overheads & contractors profit etc. complete for finished item of work.

Painting with Red Oxide Primer Paint - one coat and Synthetic Enamel Paints -Two coats -for new Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.

Provision for Seignorage Charges @2%

Towards Merit 2% on Seignorage Charges

Towards DMF 30% on Seignorage Charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Provision for CONSULTANCY CHARGES @ 2.5 %

Unforeseen item