CA NO. CWE BLY /GE(W)/14 OF 2021-2022 PROVN OF 01 DOG KENNEL FOR HOUSING FOR 04 X SICK ARMY DOGS UNDER GE(W) BAREILLY

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

All as per Sl.item No 2 above but depth exceeding 1.5m but not exceeding 3.00m complete all as specified and as directed.

M&L for providing Plain Cement Concrete, type D-2, 1:4:8 Mix (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing excavated soil to distance n.exc. 50m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Labour only for spreading, levelling, watering and well ramming the earth filling under floor not exc 25cm thick in each layer in soft/loose. Note :- approved soil obtained from excavation shall be reused.

M&L for RCC M25, Design mix (Using 20mm graded stone aggregates) as in foundations, including raft, footing, foundation beam, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M25 Design mix (Using 20mm graded stone aggregates) as in columns, piers, posts etc complete all as specified and directed.

M&L for RCC M25 Design mix (Using 20mm graded stone aggregates) as in beams, lintel beams over 1.50 meter span,cantilevers, bressummers etc complete all as specified and directed.

M&L for RCC M25 Design mix (Using 20mm graded stone aggregates) as in Chajjas complete all as specified and directed.

M&L for RCC M25 Design mix (Using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floor, roof, landing, balconies etc complete all as specified and directed.

M&L for use & waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.

M&L for use & waste of form work to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for use & waste of form work to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc.for fair finished surfaces of concrete complete all as specified and directed.

M&L for use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n.exc. 200 mm thick curved (horizontal or sloping ) work for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for Providing Plain Cement Conrete, type B-1, 1:2:4 mix (using 20mm graded stone aggregates) in lintels upto 1.5m clear span, cills, steps, seismic, and other similar bands, plinth courses, string courses, lacing courses parapets and railing up to 60 cm in height, copings, benching, kneelers, apex, stone bed plates water troughs and the like including weathering slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed

M & L for Damp proof course 40 mm thick in PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) including of water proofing compound @ 3% by weight of cement to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars upto 8mm dia., cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders , cut to length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified.

M&L for Hard core of guage n exc.63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M& L for 75 mm thick PCC 1:4:8 mix, type D-2 (using 40mm graded stone aggregates) as in sub base floor / pavings complete all as specified and directed

M & L for 25 mm thick PCC ,1:2:4 mix, type B1(Using 20 mm graded stone aggregates) as in floor finished rough to receive top layer complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete external surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling of fair faces of concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and directed..

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for applying two coats of Oil bound distemper over a coat of alkali resistant primer including preparation of newly plastered surface of walls complete all as specified and directed.

S&F 32 mm dia , fancy type , drapery curtain rod of stainless steel pipe, 1.6 mm of thickness, including pair of stainless steel fancy brackets and other connected accessories etc complete all as specified and directed.

M&L Machine cut Kota stone slab 18 mm to 20 mm thick , as in flooring with 18 -20 mm thick and 75 mm wide white marble strip border , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing to give granite finish, over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed.

M&L for Machine cut kota stone slab 18-20 mm thick as in riser / steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and mirror polishing over and including 15 mm thick backing coat in CM (1:4) complete all as specified and directed. Note:- Kota stone in riser & treads of steps shall be in one piece.

S&F Steel windows with pressed steel frame (dimension- 95X45X1.25 mm), side hung shutters including box type hinges with steel handle, and steel peg stay, complete with Glazed openable shutter with glazing bars (out side shutters) and wire gauged openable shutter without glazing bars ( inside shutter),dovetailed or welded complete all as specified and directed all as per Drg No- TD/088 dt 07 Jan 2002.

S&F steel ventilators, bottom portion fixed type glazing and top portion with top hung wire gauze shutter dovetailed or welded complete all as specified and directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeall as specified( Fe-410-O or 310-O) complete all as specified and directed.

S&F expanded metal weight not exceeding 4.00 Kg/Sqm cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples and fixed to wood or steel members complete all as specified and directed.

M&L for preparation of new steel surfaces and apply two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm in width or girth of surfaces complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 mix, (using 40mm graded stone aggregates) as in plinth protection laid in slope in 1:30 in alternate bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.

M&L PCC 1:2:4, type B-1, (using 20mm graded stone aggregates) as in surface channel/benching inside manhole including necessary form work finished even and smooth without using extra cement complete all as specified and directed.

Extra for forming fair fnished drain or channel 30cm inner girth in cement concrete using extra cement including moulds forms mitred/stripped ends complete all as specified and directed.

Add or deduct to above mentioned item No 43 herein before for each 25mm girth or part thereof over or under 30 cm girth all as specified.

S&F Vitreous china Wash hand basin white, flat, back, size 480x560x195 mm with full pedestal ,excluding tap but including PVC flexible waste pipe of standard length and suitable size brackets and including cutting for and pining in ends of brackets complete all as specified and directed.Cat No ARS-WHT-39801 of Jaquar or equivalent model manufactured by Essess/Marc.

S&F 15mm Pillar tap swan neck fancy type of cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered Hot or Cold with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified & as directed.

S&F PVC flexible waste pipe for WHB, 32mm bore of 600mm length complete all as specified & as directed.

S&F 600mmx450mm bevelled edges mirror consisting of 6mm thick commercial plywood and fixed to plug with chromium plated brass screws and cup washer complete all as specified & as directed.

S&F towel rail 600mm long PTMT (minimum weight 190gms) fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F soap dish, stainless steel fixed to wall with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F 15mm bore concealed stop cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F fancy type bib taps, 15 mm dia, chromium plated with wall flange, cast copper alloy with capastan head, screwed down for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F PVC connection, 15mm bore, length not less than 600 mm long, both ends with PTMT nuts complete all as specified & as directed.

S&F PVC (SWR), 75mm bore pipes, Single socketed, in any length with rubber ring joints fixed to walls and floor with necessary fittings complete all as specified and directed.

S&F PVC (SWR), 110mm bore pipes, Single socketed, in any length with rubber ring joints fixed to walls and floor with necessary fittings complete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius with access door complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius with access door complete all as specified and directed.

S&F 500 litre capacity, rotational moulded polyethlene tripple layered water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F GI tubing of 15 mm dia, medium grade with all fittings and fixed to walls or ceiling or laid in floors complete all as specified and directed.

M & L for Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 for concealed water tubing and making good the disturbed surfaces to match with the existing finish, cutting not exceeding 10 cm girth in brick wall of any description built in cement mortar complete all as specified and directed.

S&F 20mm bore Gun-metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 20 mm dia, Ball brass valves ,high pressure with polythene float and flynut PTMT complete, screwed for iron pipe or brass ferrule complete all as specified and directed

M&L for Salt glazed stone ware gully traps square or rounded mouthed type for 150x150mm size fixed in cement concrete complete all as specified and directed

S&F 125mm dia. grating doom with waste hole of PTMT (Min wt 40 gms) complete all as specified & as directed.

M&L applying three coat of white wash including preparation of new plastered surfaces of wall complete all as specified and directed.

E/M Part:- M&L for point wiring with 1.5 Sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable (red colour cable to be used for live connection and black colour cable to be used for neutral connection) controlled by one way switch drawn through and including PVC concealed conduit with all accessories including 1.0 Sqmm copper multistranded conductor FRLS 1100 Volts grade, unsheathed, PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches , socket, and fan regulator, with 3 mm thick hylum laminated sheet cover including cutting Chases, pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete for one light/fan/bell point controlled by one switch/bell push complete all as specified and directed.

All as per item No 66 here-in-before but for 3 pin 5 Amps socket outlet point controlled by one switch on independent board

All as per item No 66 here-in-before but for 3 Pin, 5 Amps, Socket outlet point controlled by one switch on the same board

S&F Switch, Piano, flush type, polycarbonate, 5 Amps, Single Pole, one way complete all as specified and directed.

S&F Socket outlet, Polycarbonate, 2 in 1, 3/5 Pin 5/15 Amps, multipurpose, flush type complete all as specified and directed.

S&F Ceiling rose, PVC Polycarbonate, isolated body, 3 terminals AC 230 volt complete all as specified and directed.

S&F Stepped type, electronic fan regulator, flush mounting type, 180Watts, 230Volt complete all as specified and directed.

Supply & fix Surface Mounting LED, indoor decorative, PVC extruded T-5 batten, 20Watt, 4 feet long fitting including connection with 23/0.0076, three core, PVC flexible cable complete all as specified and directed. Cat No LTTB4F20WLED P/W manufactured by M/s C&S or equivalent model manufactured by M/s Philips/Bajaj.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts,check nuts, nuts and washers of GI or steel all as shown in electrical plate No 3 of SSR-I connected to earth test point by means of nut, bolts and washers made out of galvanised iron or steel all including earthing pit in PCC (1:3:6) type C1,RCC (1:2:4) type B1 precast cover slab with one handle made out of 8 mm dia round bar,20 mm dia (medium grade) protecation pipe and providing layer of charcoal or coke and salt in alternative layers,necessary excavation & earth work in any type of starta complete all as specified including testng on completion complete all as specified and directed.

S&F Ceiling fan, 1200mm Sweep complete with all accessories such as rubber reel, split pins, check nuts, fan blades, PVC conopy, fan clamps, capacitor, PVC connector etc. and suitable electric connection with three core flexible PVC insulated copper conductor (multistranded) cable of 1.0 Sqmm from ceiling rose to fan complete all as specified and directed.

Supply and fix Security light fitting, LED type, 20 Watts, 6000 K, Pressure die cast housing with Prismatic Polycarbonate diffuser & individual LEDs as light source with integrated electronic driver complete with GI Pipe Mounting bracket of size 32mm dia and 1.20m long fixed to wall with and including nuts, bolts and GI clamps made out MS flat Iron of size 50x6mm as required including two coats of synthetic enamel over a coat of primer and making connection with three core 23/0.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed Cat No:- BCLST 20W LED manufactured by M/s Bajaj or equivalent model manufactured by M/s Philips/C&S.

M& L for 100 mm thick PCC 1:4:8 mix, type D-2,( using 40mm graded stone aggregates) as in sub base floor / pavings complete all as specified and directed

M&L for Precast Plain Cement Concrete coloured interlocking paver blocks factory made with casting in rubber/PVC moulds & compacting on a vibro table assembly and shall be cured in curing tank for at least 14 days and then air dried before use. The paver block shall be conforming to IS 15658 -2006 of 80mm thickness, M-40 Grade. approved design, shape, size and colour of top layer laid over & including dry river sand bedding 50 mm thick complete all as specified and directed.

Supply, lay, jointing, testing and commisioning XLPE insulated screened PVC bedded, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 Volts grade, cross sectional area 10 Sqmm 4 core complete all as specified and directed. Note :- Excavation earthwork, sand cushioning & brick protection shall be measured & paid seperately.

M & L for river washed and screened sand for filling in trenches below and around the under ground cable including necessary punning for cushoining of cable complete all as specified and directed. Note : For measurement purpose, the punned down thickness of 18cm only shall be considered.

Supply and lay bricks old size, well burnt, sub class 'B' bricks as in protection cover over under ground cable laid flat across the cable adjoining each other, laid dry complete all as specified and directed

S&F of galvanized iron pipe of 40 mm bore, Light grade with all fittings for cable protection for road crossing/ culvert/ path/ on wall/ floor/ pole or laid in floor complete all as specified and directed.

S&F Sheet metal enclosure, factory fabricated, for MCB distribution board TPN, 240V, 12 way with 200 Amps rated bus bar having IP-43 protection, neutral link, earth bar and Din rail, double door, concealed in wall including connection with thimbles as required complete all as specified and directed.

S&F MCB, TPN, 100 Amps, 240V Volts 'B' curve 10 KA rupturing capacity complete all as specified and as directed.

S&F MCB, Single Pole, 6 to 32 Amps, 240 Volts, 'B' curve 10 KA rupturing capacity complete all as specified and directed.

Shikhar ji Enterprises

M/S Harshri Nath Enterprises