Provision of Additional Street light plus replacement of defective UG Cable at Kadalur Point Lighthouse under Cochin Directorate

Amount

PART-A- Additional street Light fittings and Poles for Kadalur Point Lighthouse.

Supply of 25W LED street light fitting of approved make (on existing street light pole complete with all accessories as required.)

Supply and Making Street Light pole with 3 inch Dia GI C class pipe, reputed make 3 mtr ,3” x 2 ” GI Threaded Reducer Socket-1 nos, 2 ” 2 mtr pipe Bended at 0.5mtr position with adequate angle and welded etc.. with a base plate 8mm Thick MS Plate of size 450x450mm for supporting etc as required

Labor Charge for Pole Installation all works

Earthwork Excavation(0.6 x 0.6 x 0.5m) for the foundation and 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) Concrete Work (0.6 x 0.6 x 0.5m) for the foundation with Post pipe placed in concrete inclusive of materials and Brick Work (0.3 x 0.3 x 0.45m) for post base and placing of pipes for cable entry and Plastering Work (2 x 0.3 x 0.45 + 2 x 0.3 x 0.45 + 0.3 x 0.3m) for post base and Painting Work (2 x 0.3x 0.45 + 2 x 0.3 x 0.45 + 0.3 x 0.3m) for post base of Streetlight Posts

Supply and Fixing SMC Pole mounted Junction Box with side hinged door, IP55, reputed make GSJB 2014 with 32A Backlite connector and 6A SP MCB 1 Nos

Supply of UG Cable, 2Core x 1.5 mm2, Armored, Copper Conductor, HRPVC/ XLPE Insulation, reputed make

UG Cable laying and termination by digging trenches 1ft wide x 2ft depth, laying of UG Cable and covering of UG Cable with Brick / PVC water Pipe and refilling the trench etc. as required.

Supplying and making end termination with brass compression gland for UG Cable, 2Core x 1.5 mm2, Armored, Copper Conductor, HRPVC/ XLPE Insulation as required.

PART-B- Repair of existing street Lights at Kadalur Point Lighthouse.

Supply of UG Cable, 2Core x 2.5 mm2, Armored, Copper Conductor, HRPVC/ XLPE Insulation, reputed make

Supply and Fixing SMC Pole mounted Junction Box with side hinged door, IP55, reputed make GSJB 2014 with 32A Backlite connector and 6A SP MCB 1 Nos

UG Cable laying and termination by digging trenches 1ft wide x 2ft depth, laying of UG Cable and covering of UG Cable with Brick / PVC water Pipe and refilling the trench etc. as required.

Supplying and making end termination with brass compression gland for UG Cable, 2Core x 2.5 mm2, Armored, Copper Conductor, HRPVC/ XLPE Insulation as required.

MAHESH KR

AJESH KK