SPECIAL REPAIR TO TEMP EXPLOSIVE STORE HOUSE NO 13 IN B SUB DEPOT AT 29 FAD AND SHED NO 57 WITHIN THE PREMISES OF 29 FAD SASF OF 787 I AD BDE AND SPECIAL REPAIR TO FALSE CEILING AND ROOFING IN GYM BLDG NO PRR 210 AT HQ 787 I AD BD UNDER GE DEHU ROAD

Amount

Dismanteling asbestos cement (corrugated, semi corrugated, etc) sheet as in roof covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of plain cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down chowkhats with shutters(without taking off shutters from the frames) of any description n.exc 1.50 Sq.m each complete all as specified and directed.

S & F 2nd class hard wood glazed and skeleton ventilator shutters of 25 mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section8, clause 8.24(a), supplied and fitted to chowkhats all as specified and directed.

S & F 3 mm thick plain ordinary quality sheet glass and glazing with oil putty in square n.exc 0.50 Sq.min each panes complete all as specified and directed.

Preparation of new or previously untreated wood or wood based surfaces, surfaces of any description, over 10 cm width or girth and applying two coats of syntheitc enamel paint over acoat of pink primer complete all as specified and directed.

-do- all as per Item No.09 but one coat of synthetic enamel paint including preparation of old surfaces.

S & F 0.5 mm thick pre painted galvalume Aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strenth of 550 Mpa as in roofing coveringcladding to wall fixed with self tapping screws complete all as specified and directed.

Ditto as per item- 11 above but plain sheet as in ridge, valley gutters etc

S&F Rolled Sections as in main croos beams, hip and jack rafters; purlins, where connected to common rafter, posts etc. conf to Fe-410-w(gdeE-250 quality-A) all as specified and directed

S&F Roof truss framed trussed etc incl distance piece, cleats with necessery welding works etc Fe 410-W ( gde E-250)Quality A all as specified and directed.

M & L for brick work in burnt brick with sub class "B" brick straight or curved on plan exceeding 6 m mean radius and built in CM 1:6 complete all as specified and directed.

M & L for Rendering cement plaster 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces even and smooth (without using extra lime or cement)

M&L for rendering 15 mm thick in CM 1:4 on Brick / concrete surfaces or surfaces other than fair face of brickwork even and smooth (without using extra lime or cement) with incl admixture of cement. (WPC to be measured and paid separately) including finished even and fair complete all as specified and directed.

Supply only integral water proofing compound.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth & applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 Type C2 for plinth protection complete all as specified and directed.

M & L for 100 mm thick PCC type D2 1:4:8 (using 40 mm graded stone aggregate) as in floor and finishing of concrete surface as in sub base complete all as specified and directed.

M & L for 75 mm thick PCC type B1 1:2:4 (using 20 mm graded stone aggregate) as in floor and finishing of concrete surface shall be even and smooth without using extra cement complete all as specified and directed.

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

ditto as per item no. 23 above but except stone

M & L for cement concrete type B1 1:2:4 ( using 20 mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Keyed pointing in cement mortar 1:4 to random or polygonal rubble, uncoursed or brought upto course complete all as specified and directed.

Preparation of plastered or untreated old plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid complete all as specified and directed.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling complete all as specified and directed.

M&L 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid complete all as specified and directed.

S & F hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long complete all as specied and as directed.

E/M Portion

M&L for point wiring with 1.5 sqmm multistranded copper conductor cable of PVC insulated and unsheahed type alongwith 1.5sqmm PVC insulated unsheathed single stranded copper conductor cable for continous earthing in & incl casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/(MS steel strips if required) including hard PVC boards of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator set Etc Note:- Screws used for fixing PVC boards, casing & caping ceilling rose square blocks etc should be nickel cadmium screws:-

One light/Fan point controlled by one switch

One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 other switches, with cables 1.5 sq. mm size

One socket 5 pin 5 Amps flush type on independent board

All as per item No 1 above but 2.5 sqmm copper conductor with 1.5 sqmm copper cable PVC insulated as contnious earth wire for 15 Amps switch socket independent.

S&F switch piano flush type single pole one way 5 Amps

S & F Socket outlet 2 in 1, 3 pin, 5A

S&F switch socket combination 2 in 1, 3 pin 5 Amps and 3 pin 15 Amps flush type universal.

S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block

supply &fix Metal sheet Enclosure of 8 way with 200 amps rated bus bar

supply &fix isolator SPN,240v 60 amps Rated

supply &fix isolator SP ,240v 6-32 amps Rated

PVC Rectangular block for switches,sockets etc with 3 mm thick plastic laminated cover of size of 250mmX200mmX50 mm

M & L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less 1.5mtr below normal ground level. Earth plate surrounded on all sides with 15cm thicklayers of charcoal dust mixed with salt and connected with earth lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel in heavy duty HDPE pipe for protection of GI wire in for earthinglighting arrester including precast RCC pit in (1:2:4) type B-I cover with suitable handle, excavation and earth work in soft/loose soil, light grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GI protection pipe 15mm bore upto bottom of electric HT pole complete all as shown in EP No 03 of MES Sch-1991 (Pt-1) and testing all as directed by EIC.

supply &laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area 2 Core 16 sq mm

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 m in depth for removing / laying underground cables etc and getting out in Soft Loose Soil

Returning, filling in incl spreading,levelling watering and well ramming in layer n exc.25 cm in soil.

Removing excavated surplus material to a distance n.exc 50 m and deposting where directed at a level n exc. 1.5 m above the starting point in any type of soil

Supply& laying HDPE DWC Pipe 20 mm 6 Kg CM2

S&F in repair LED Recess mounted LED fitting 28/36 Watts CAT NO LCTLSNE-36-FO-WW of CROMPTON or PLUTONEO2X2PLR34WLED840S of HAVELLS or HPLLEDEPN36WWS of HPL

Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated

RAMESH PATIL

S RESHAMSINGH AND SONS

DR J S CHADHA AND SONS

RK AND SONS CREATION

Star Construction

Dinesh Constructions

D J Construction