Renovation of C37, 38, 39, 40 quarters (5th Block of Guest House Additional) in Housing Colony at TNPL Unit I

Amount

FORM WORK - WROUGHT AND PUT UP WITH GOOD QUALITY MARINE GRADE PLYWOOD / STEEL SHUTTERING INCLUDING STAGGING FOR ALL TYPE OF WORKS AND REMOVING AFTER CONCRETING AND "PLASTER FREE FINISH" AT ALL LEVELS.

TAKE DELIVERY OF HIGH STRENGTH RIBBED DEFORMED BARS/ MS BARS ISSUED BY TNPL FREE OF COST, CUT, BEND AND TIE UP IN POSITION INCLUDING COST OF SUPPLYING NECESSARY 18 GAUGE BINDING WIRE FOR ALL TYPES OF RCC WORKS AT ALL LEVELS.

CEMENT CONCRETE M20 USING 20 MM SIZE BLUE GRANITE AGGREGATE FOR ALL CEMENT CONCRETE ITEMS SUCH AS COLUMN, BEAM, SLAB, LINTEL, SUNSHADE, STAIRCASE ETC., EXCLUDING SHUTTERING BUT INCLUDING LEVELLING, CURING, ETC., COMPLETE FROM 0.00 MTR TO +7.00 MTR LEVEL

SUPPLY AND LAYING OF FLY ASH BRICKS IN SUPER STRUCTURE IN CM 1:6 INCLUDING SCAFFOLDING, CURING ETC., COMPLETE ABOVE +0.00 MTR TO +7.00 MTR

BRICK MASONRY WITH APPROVED QUALITY CHAMBER BURNT BRICKS / FLY ASH BRICKS IN HALF BRICK THICK WALL IN CM 1:4, EXCLUDING PLASTERING, INCLUDING SCAFFOLDING, CURING ETC., COMPLETE AT ALL LEVELS.

PREPARE SURFACES OF WALLS AND PLASTER INTERIOR, EXTERIOR AND TOP FACES WITH CEMENT MORTAR, 12MM THICK IN CM 1:4 INCLUDING NECESSARY SCAFFOLDING AND CURING ETC., COMPLETE FROM FFL TO +7.00 MTR LEVEL.

TAKE DELIVERY AND FIXING OF ATHANGUDI PLAIN TILES / FLOWER TILES 20 - 25MM THICK OVER THE CEMENT BED IN CM 1:3 AND POINTING THE JOINTS WITH RED, YELLOW, BLACK, GREEN OXIDES MATCHING THE COLOUR OF EXISTING TILES. RATE INCLUDES SKIRTING LAYING, CLEANING THE TILES WITH RICE HUSK AFTER LAYING, CURING ETC., COMPLETE AT ALL LEVEL AS DIRECTED BY ENGINEER INCHARGE

SUPPLYING AND FIXING OF CERAMIC FLOOR TILES ANTI SKID OF SIZE 300 X 300MM X 8MM THICK OF APPROVED MAKE AND SHADE WITH BED MORTAR IN CM 1:3, 20MM THICK TO DESIRED SLOPE AND POINTING THE JOINTS WITH TILE MAT COMPOUND, CURING, ETC., COMPLETE AT ALL LEVELS FOR TOILETS.

SUPPLYING OF WALL TILES OF APPROVED MAKE, SIZE AND DESIGN / SHADE AND FIXING THEM IN POSITION FOR WALLS WITH BED MORTAR IN CM 1:3, 20MM THICK, PREPARING THE SURFACES AND POINTING THE JOINTS WITH TILE MAT COMPOUND AS DIRECTED BY ENGINEER INCHARGE.

SUPPLYING AND FIXING OF SS HANDRAIL PIPE OF SS 304 GRADE 40 MM DIA FOR TOP RAIL AND 32 MM DIA FOR BOTTOM RAIL AT ALL LEVELS. THE RATE INCLUDING FIXING OF PIPES WITH PILLAR SUPPORTS AND POLISHING THE JOINTS WITH ALL CONSUMABLES, LABOURS ETC., COMPLETE.

SUPPLY OF STANDARD SOLID FLUSH WOODEN DOOR (SINGLE LEAF) OF SHUTTER 30MM THICK AND SIZE 900 / 1000 X 2100 MM. THE DOOR SHALL BE LAMINATED WITH 1 MM THICK MERINO / ARCHID LAMINATED SHEETS ON BOTH SIDES WITH APPROVED SHADE AND FINISH WITH VISION PANEL WHEREVER NECESSARY. THE RATE INCLUDES COST OF WOODEN FRAME FOR DOOR SHUTTERS, HARDWARES OF SS 304 HANDLES, HINGES, BRASS LOCKS AND LATCHES, DOOR STOPPER, AUTOMATIC DOOR CLOSER ETC., COMPLETE.

SUPPLYING AND FIXING OF ONE SIDE POLISHED GRANITE SLAB 16MM THICK OF APPROVED COLOUR AND FIX IN POSITION OVER CEMENT SLAB IN CM 1:3, 12 MM THICK AND POINTING THE JOINTS FREE WITH TILE MATT COMPOUND, NOSING OF EDGES, CURING ETC., COMPLETE AS DIRECTED BY ENGINEER IN CHARGE.

PROVIDING AND FIXING OF UPVC SLIDING WINDOW OF SIZE 1.50 X 1.20. THE FRAME MADE OUT OF UPVC PROFILE SECTION OF SIZE 62MM X 60MM X 2.2MM THICK WITH SHUTTER FRAME OF STANDARD SECTION 2.2MM THICK. THE WINDOW SHUTTER COVERED WITH 5MM THICK PLAIN GLASS INCLUDING FIXING OF ALUMINIUM JOINERY FITTINGS, LABOUR CHARGES, SCREWS, RUBBER BEADING ETC., COMPLETE

SUPPLYING AND FIXING OF UPVC LOUVERED VENTILATOR OF SIZE 750 X 600 MM WITH ADJUSTABLE LOUVERS USING 5MM THICK FROSTED GLASS RATE INCLUDES ALL CONSUMABLES, LABOUR CHARGES ETC., COMPLETE AT ALL LEVELS.

SUPPLYING AND FIXING IN POSITION OF MS GATE / GRILL USING SQUARE (OR) RECTANGULAR BAR INCLUDING NECESSARY WELDING AND APPROVED DESIGN INSTRUCTED BY ENGINEER INCHARGE INCLUDING APPLYING ONE SHOP COAT OF RED OXIDE PRIMER ETC., COMPLETE

"TAKE DELIVERY OF 110 / 75 MM DIA PVC PIPE AND LAYING IN POSITION INCLUDING NECESSARY TOOLS AND TACKLES LIKE PVC SOLVENT AS DIRECTED BY ENGINEER IN CHARGE".

TAKE DELIVERY OF FOLLOWING MATERIALS SUPPLIED BY DEPARTMENT ON FREE OF COST AND FIXING, EWC, PLASTIC LOW LEVEL TANK WITH INTERNAL FITTINGS,CP ANGLE VALVE,CP INLET CONNECTION,PLASTIC SEAT COVER ETC.,AS DIRECTED BY ENGINEER INCHARGE INCLUDING NECESSARY CIVIL WORKS LIKE MAKING OPENING IN THE EXISTING WALL,TAPPING FROM EXISTING WATER LINE FOR INLET TO THE TANK,LABOUR CHARGES ETC., COMPLETE IN GROUND AND FIRST FLOOR.

THROUGHLY CLEANING THE EXISTING PAINTED SURFACES OF WALLS USING BUFFERING MACHINE. SCRAP THE EXISTING PAINTED SURFACE AND DISPOSE THE SAME AS DIRECTED. RATE INCLUDES LABOUR CHARGES AND ALL OTHER INCIDENTIAL CHARGES ETC., COMPLETE AT ALL LEVELS.

THOROUGHLY PREPARE THE SURFACES OF WALLS AND APPLY TWO COATS OF FIRST QUALITY WALL PUTTY INCLUDING FINISHING SMOOTHLY WITHOUT ANY WAVINESS, ETC., AT ALL LEVELS.

THROUGHLY PREPARE THE SURFACES AND APPLY ONE COAT OF WALL PRIMER OF APPROVED MAKE OVER WALL PUTTY SURFACES AND APPLY TWO COATS OF ACRYLIC EMULSION IST QUALITY OF APPROVED COLOUR AND MAKE INCLUDING MATERIAL COST AND ALL CONSUMABLES LABOUR CHARGES, SCAFFOLDING ETC. COMPLETE AT ALL LEVELS.

SUPPLY AND APPLICATION OF ONE COAT OF WEATHER PROOF EXTERIOR PRIMER AND TWO COATS OF EXTERIOR EMULSION OF APPROVED COLOUR SHADE INCLUDING SCAFFOLDING, LABOUR ETC., COMPLETE AT ALL LEVELS. (ASIAN OR BERGER).

ERECTION OF SCAFFOLDING AND CLEANING THE SURFACE OF STRUCTURAL MEMBERS USING WIRE BRUSH, EMERY SHEETS AND APPLY ONE COAT OF RED OXIDE PRIMER OF APPROVAL QUALITY AND TWO COATS OF SYNTHETIC ENAMEL PAINT OF EITHER BERGER, ASIAN, SHALIMAR, ICI DULEX OR EQUIVALENT (INDUSTRIAL QUALITY) OF APPROVED COLOUR INCLUDING COST OF ALL MATERIALS, PAINT AND ALL OTHER INCIDENTAL CHARGES ETC., COMPLETE AT ALL LEVELS.

PROVIDING TEMPORARY PLATFORM BY USING PIPES / SCAFFOLDING MATERIAL AND LAYING OF WOODEN PLANKS TO REQUIRED HEIGHT PROVIDE TARPAULINE OVER THE PLATFORM TO AVOID FALLING OBJECT ABOVE THE MACHINERY, ALSO REMOVE THE TEMPORARY PLATFORM AFTER COMPLETION OF THE WORK AS PER ENGINEER INSTRUCTION AT ALL LEVELS.

REMOVAL OF EXISTING WALL TILES / FLOOR MOSAIC TILES WITH CEMENT MORTAR AND DISPOSING THE SAME TO A DISTANCE OF 0 TO 2 KM AS DIRECTED BY ENGINEER INCHARGE.

FOR SMALL WORKS WHICH IS UNQUANTIFIED EXACTLY, SUPPLY OF ELECTRICAL CONCRETE BREAKER (BOUSH MAKE -MODEL NO.11E) WITH LABOUR FOR DISMANTLING OF COCNRETE, BRICK WORK, CR MASONRY, ETC., THE WORK INCLUDES DISPOSAL OF DISMANTLED DEBRIS WITHIN THE LEAD OF 2KM APART AS DIRECTED.

PROVIDING MANPOWER ASSISTANCE FOR ATTENDING MISCELLANEOUS CIVIL WORKS - MASON.

PROVIDING MANPOWER ASSISTANCE FOR ATTENDING MISCELLANEOUS CIVIL AND STRUCTURAL WORKS – HELPER FOR MASON / PLUMBER / CARPENTER / FITTER / WELDER, ETC.,

PROVIDING MANPOWER ASSISTANCE FOR ATTENDING PIPELINE WORKS - PLUMBER

UNSKILLED HELPER - PROVIDING MANPOWER ASSISTANCE FOR ATTENDING MISCELLANEOUS CIVIL WORKS.

Bidder Name

Amount in Words

S BALASUBRAMANI CONTRACTOR (BID ID -1357132)

kanagaraj (BID ID -1357199)

M.S.ENTERPRISES (BID ID -1357855)

R.GANESAN (BID ID -1357492)

kanagaraj (BID ID -1357199)

M.S.ENTERPRISES (BID ID -1357855)

R.GANESAN (BID ID -1357492)