Construction of pilgrim amenities complex (G+2) at Swayambhu Sri Varasiddi Vinayaka Swamy Vari Devasthanam, Kanipakam

Earth work excavation for foundations (Mechanical Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and 1m additional lift charges over the initial depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental ,labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site and excluding seigniorage charges, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)

Pre construction Anti termite is a process in which chemical toxic to subterrean tremites is apply/ inject APSS Rate in Tirupati TirumalaSqm 179.00into soil during early stage of building Construction.2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS lS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills orrepels terminates & impervious to termite entry3. lmidacloprid 30.5% SC (lS 63131) dissolve 2.1 Ml/lliter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the columns, plinth beams (Back filling) walls and floor junction, exlernal perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500 mm around coulmns & 300mm deep around plinth beams,basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc.complete for finished item of work as per the approval of the E ngineer-in-charge including Overheads & Contractors profit .

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)including Overheads & Contractors profit .

Filling with Gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental ,labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310)

Damp proof course 50mm thick with 1:2:4 cement concrete Nominal mix, using 12mm hard broken stone aggregate including cost of all materials, seigniorage charges, excluding conveyance charges of materials including the cost of machinery, labour charges, mixing, placing in position, leveling, vibrating, curing etc. complete for finished item of work. (Using concrete mixer)including Overheads & Contractors profit .

VRCC M-25 grade design mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using (20mm 60%, 10mm 30% & 6mm 10%) size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, including centering shuttering :including Overheads & Contractors profit .

Coloumns Below FGL

coloumns unsupported height of 5M

Roof Slab 175 mm th

Roof Slab 200mm th

VRCC M-25 grade design mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using (20mm 60%, 10mm 30% & 6mm 10%) size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, including centering shuttering :including Overheads & Contractors profit .

Sunshade of 0.6mts of avg th of 0.0625mts

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and all operational and incidental such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Reinforced Brick Masonry 11.5cm (4 1/2") thick for partition walls in CM (1:4) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. and placing 2nos. of 6mm dia MS bars embedded in every 3rd layer with free ends of reinforcement keyed into mortar joints of the main brick work whereever applicable including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., but excluding cost and conveyance of steel and its fabrication charges complete but excluding seigniorage charges for finished item of work. (APSS No. 501 & 504).including Overheads & Contractors profit .

Providing and fixing factory made uPVC white colour sliding glazed window upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks,EPDM gasket,wool pile,zin calloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes forfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer -in -Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).including Overheads & Contractors profit .

Providing and fixing factory made uPVC any colour fixed glazed Ventilators comprising of uPVC multichambered frame andmullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket/TPV,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plasticpackers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of required size and of approved quality, allcomplete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant.Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.Fixed Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension.including Overheads & Contractors profit .

S&F of M.S.Grills of any design for Doors and Windows including fabrication and fixing charges etc. Complete.including Overheads & Contractors profit .

Supplying and fixing of Best teak wood scantlings for Ornamental Door Frame & Preparation and Fixing of best Teak wood /Non-Teak ornamental door shutters with two leaves as per standard temple design including cost of frame and planks and prepararion charges. Fixing of shutter in position locking arrangements etc., with 6nos MS Hold fasts 300mm long 40x40x5mm ISA including cost and conveyance of all materials as per standard temple design for fully panelled doors to work site and all operational, incidental, labour charges etc. complete for finished item of work as per APSS 1002 Entrance Main Door size : (7'6"x9'0")including Overheads & Contractors profit .

Supply and fixing doors as per drawings with medium teak wood frame of section 115 mm x 75 mm and ISI marked flush door shutters of 35 mm thick double shutters Flush door shutters,solid bond wood block board type with teak ply on both faces. conforming to IS:2202 including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1500mm x 2100mm)including Overheads & Contractors profit .

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an over all density of 750 kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. Aminimum of 4 hinges will be required for fixing the door with the frame Complete.including Overheads & Contractors profit .

Providing and fixing factory made solidWood Polymer Composite (WPC) singleextrudedDoorFramesectionofsize with encapsulation of 8MM rigid layer onall the six surfaces. The door frame willhavearebatof32MMDoor Frame section of 45x90 MM . The two Vertical members are to be joined together with the horizontal member using 8x60 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.including Overheads & Contractors profit .

Plain Cement Concrete M15 (1:2:4) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 20mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402) PCC-M15(1:2:4)

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) For Internal Plasterings

Ceiling Plastering 2 coats

Internal wall Plastering 2coats

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) External Plasterings

Flooring with glazed vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality confirming to IS:13711,IS:13712,IS:13630 (Parts 1to 15) of any colur and finish in all shades and designs. as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing skirting/Dadooing to internal walls to 10 cm height/risers of steps with glazed vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality 1st quality conforming to IS 13711 & I13712 &IS13630 length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work, but including the cost of conveyance of all materials.

Flooring with Non-skid red or white full body Ceramic floor tiles of Size 450 mm x 450mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts1to15) of any colour and finish in all shades and designs 7.30mm thick , 1st quality and of size as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing dadooing to walls with Supply of screen printed glazed full body ceramic wall tiles of size 300 x600 mm with any type of design texturesuch as marble finish, wooden,bamboo,stone finishes etc.,scratch less,stainfree and thickness between 6-8 mm 1stquality conforming to IS:13711,IS:13712,IS:13630 (Parts1to15) of any colour and finish in all shades and designs as approved by the Engineer-in-charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads & contractors profit complete for finished item of work.

Flooring with Moon white 18-20mm thick upto 2.43m granite stone slabs (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Flooring with Telephone block granite 18-20 mm thick upto 2.43m (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Flooring with Cheery red 18-20mm thick upto 2.43m granite stone slabs (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Providing cladding/Skirting to walls with Cherry Red length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads & contractors profit complete for finished item of work.

Supply, laying & fixing of precast concrete blocks for paving of M-40 grade and thickness not less than 80 mm for Medium traffic areas conforming to IS 15658:2006 in allshapes and designs as per the manufacturer’s specification Labour charges for precast concrete blocks for paving of all grades, any thickness, all sizes & shapes including all labour charges for loading & unloading, laying to desired lines and levels complete including cost of cement, sand, water, electricity etcincluding Overheads & Contractors profit .

Providing and applying wall putty of White Cement or Polymer or Cement based over plastered surface to prepare the surface even and smooth after throughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean&wipe off loose dust, applying knifing paste filler by putty knife/muslin pad, air dry for 2 to 3 hours , sand with 180 and 320 nos emery paper for the surface prepartion including cost and conveyance of all materials to work site and all perational , incidental, labour chartges etc., complete for finished item of work for internal walls.including Overheads & Contractors profit .

Painting to new walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. approved brand,of first grade over cement primary making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and operational, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work as per SS911 for internal walls.including Overheads & Contractors profit .

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. as per SS911 for External walls.

Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre of approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other taxes on cost of all materials etc.and overheads & contractors profit complete (APSS No.1200, 1207 & 1211) in all floors.

Supply & applying Melamine Polish Glossy/ Matt finish to the wood works over 2 with more coats of French spirit polish duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., complete for finished item of workincluding Overheads & Contractors profit .

Polishing two coats to teak wood doors using French spirit polish of approved brand for new wood work to teak wood frame and shutters including sand papering to smooth surfaces etc. including cost and conveyance of all materials to site, all labour charges etc., complete for finished item of work in all floors.including Overheads & Contractors profit .

Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work in all floors.( APSS No.126)

Laying of Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters for - 304 Grade including Labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish.including Overheads & Contractors profit .

Supplying and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5 mm thick/ 9.5 mm thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm conforming to IS 2095 - 1982 fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200 mm c/c and fixing the 12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm and finishing two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification.including Overheads & Contractors profit .

First class Ornamental plastering 1" to 1 1/4"thick with base plastering 1/2"to 3/4" in cm (1:3) and top finishing 1/2" thick with cm(1:3)and top finishing 1/2'' thick wioth CM(2:2) to bring the required ornamentation, fine rendering with neat cement including cost and convyeyance of all materilas, labour charges, all incidental and operational charges, curing etc., complete. To the required shape and size as per the approved Drawing and as per silpi Norms including preparation and fixing of precast pillars. Wherever necessary unit-10 sqm.including Overheads & Contractors profit .

Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same.including Overheads & Contractors profit .

Providing and fixing flooring with full depth jointing and pointing to the Vitrified/ Ceramic Tile flooring in specified thick for tiles of any sizes with epoxy emulsion grout/ synthetic / resin adhesive in width of 3-5 mm with Nylon spacers excluding cost of tiles.including Overheads & Contractors profit .

SPECIALISED HIGH PERFORMANCE ACRYLIC POLYMER MODIFIED ELASTOMERIC CEMENTITIOUS WATERPROOFING SYSTEM COATINGTO THE WET AREA / a ) First Layer - Supply and Apply penetrative cum bonding primer as base primer cum sealer coat using equivalent modified with water and cement at the ratio 2:1:3 (MIXPRIME AC 100 : water : cement) by volume with a slow speed mixer machine. This compoundshall be applied with sufficient thickness to cover the holes/pores/cracks @ 1.000 Liter /SQM and the raw primer should be complain with ASTM 4541 and the Solidcontent 49% +2%b ) Second Layer – Supply and apply of 2 x2 mm welded with alkaline resistant coated / non-woven 40 Gsm verging fiber mesh or equivalent for a minimum over lap of 100 mm embedded inthe primer coatc ) Third Layer - Supply and apply of first coat of two component (Powder + Liquid) system of high performance acrylic polymermodified elastomeric cementitious waterproofing system or equivalent @ 1.000 Kg / SQM ( mix the powder and liquid with the help of a slow speed mixer for a period of 2 to 3 minutes up to get a homogeneous mix- dilution or modification not recommended) should be complain with BS 1881 Part 5 1983 (ISAT 476 Part 6), DIN 1048 Part 5 1991, BSEN 12390-8 2000, ASTM D 412-92 d ) Fourth Layer –Supply and apply of second coat of two component (Powder + Liquid) system of high performance acrylicpolymer modified elastomeric cementitiouswaterproofing system equivalent @ 1.000 Kg / SQM ( mix the powder and liquid with the help of a slow speed mixer for a period of 2 to 3 minutes up to get a homogeneous mix- dilution or modification not recommended) should be complain with BS 1881 Part 5 1983 (ISATincluding Overheads & Contractors profit .

VRCC M-25 grade design mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using (20mm 60%, 10mm 30% & 6mm 10%) size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, including centering shuttering :including Overheads & Contractors profit .

b. Coloumns unsupported height of 5.00 M

d. Roof Slab 175 mm thick

e. Roof slab 200mm thick

VRCC M-25 grade design mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using (20mm 60%, 10mm 30% & 6mm 10%) size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, including centering shuttering :including Overheads & Contractors profit .

b.M-25 Grade Design mix for plain sunshade 0.6 Mt wide 1.00 mt length (1 smt) 3" to 2" thick with steel centring

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and all operational , incidental charges such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Reinforced Brick Masonry 11.5cm (4 1/2") thick for partition walls in CM (1:4) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. and placing 2nos. of 6mm dia MS bars embedded in every 3rd layer with free ends of reinforcement keyed into mortar joints of the main brick work whereever applicable including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., but excluding cost and conveyance of steel and its fabrication charges complete but excluding seigniorage charges for finished item of work. (APSS No. 501 & 504).including Overheads & Contractors profit .

Providing and fixing factory made uPVC white colour sliding glazed window upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks,EPDM gasket,wool pile,zin calloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes forfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer -in -Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).including Overheads & Contractors profit .

Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 x 55 mm with reinforcement of 1 mm thickness and Mullion with overall size of 74 x 60 mm with reinforcement of 1 mm thickness. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.0 mmincluding Overheads & Contractors profit .

S&F of M.S.Grills of any design for Doors and Windows including fabrication and fixing charges etc. Complete.including Overheads & Contractors profit .

Supply and fixing doors as per drawings with medium teak wood frame of section 115 mm x 75 mm and ISI marked flush door shutters of 35 mm thick double shutters Flush door shutters,solid bond wood block board type with teak ply on both faces. conforming to IS:2202 including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1500mm x 2100mm)

Providing and fixing28 -30 MM thicksolidWoodPolymerComposite(WPC)single extruded door shutter with 3MMtop and bottom rigid layer with an overalldensity of 750kg/Cum. It will be fixed tothe frame using 3 inch /4 inch hinges. Aminimum of 4 hinges will be required for fixing the door with the frame Complete.including Overheads & Contractors profit .

Providing and fixing factory made solidWood Polymer Composite (WPC) singleextrudedDoorFramesectionofsize with encapsulation of 8MM rigid layer onall the six surfaces. The door frame willhavearebatof32MMDoor Frame section of 45x90 MM . The two Vertical members are to be joined together with the horizontal member using 8x60 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.including Overheads & Contractors profit .

Plain Cement Concrete M15 (1:2:4) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 20mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402) PCC-M15(1:2:4)

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) For Internal Plasterings

a. Ceiling plastering 2 coats

b. Internal Wall Plastering 2 coats

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) External Plasterings

Flooring with glazed vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality confirming to IS:13711,IS:13712,IS:13630 (Parts 1to 15) of any colur and finish in all shades and designs. as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing skirting/Dadooing to internal walls to 10 cm height/risers of steps with glazed vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality 1st quality conforming to IS 13711 & I13712 &IS13630 length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work, but including the cost of conveyance of all materials.including Overheads & Contractors profit .

Flooring with Non-skid red or white full body Ceramic floor tiles of Size 450 mm x 450mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts1to15) of any colour and finish in all shades and designs 7.30mm thick , 1st quality and of size as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing dadooing to walls with Supply of screen printed glazed full body ceramic wall tiles of size 300 x600 mm with any type of design texturesuch as marble finish, wooden,bamboo,stone finishes etc.,scratch less,stainfree and thickness between 6-8 mm 1stquality conforming to IS:13711,IS:13712,IS:13630 (Parts1to15) of any colour and finish in all shades and designs as approved by the Engineer-in-charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads & contractors profit complete for finished item of work.

Flooring with Moon white 18-20mm thick upto 2.43m granite stone slabs (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Flooring with Cheery red 18-20mm thick upto 2.43m granite stone slabs (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Providing cladding/Skirting to walls with Cherry Red length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads & contractors profit complete for finished item of work.

Providing and applying wall putty of White Cement or Polymer or Cement based over plastered surface to prepare the surface even and smooth after throughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean&wipe off loose dust, applying knifing paste filler by putty knife/muslin pad, air dry for 2 to 3 hours , sand with 180 and 320 nos emery paper for the surface prepartion including cost and conveyance of all materials to work site and all perational , incidental, labour chartges etc., complete for finished item of work for internal walls.including Overheads & Contractors profit .

Painting to new walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. approved brand,of first grade over cement primary making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and operational, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work as per SS911 for internal walls.including Overheads & Contractors profit .

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. as per SS911 for External walls.

Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre of approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other taxes on cost of all materials etc.and overheads & contractors profit complete (APSS No.1200, 1207 & 1211) in all floors.

Polishing two coats to teak wood doors using French spirit polish of approved brand for new wood work to teak wood frame and shutters including sand papering to smooth surfaces etc. including cost and conveyance of all materials to site, all labour charges etc., complete for finished item of work in all floors.including Overheads & Contractors profit .

Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work in all floors.( APSS No.126)

Laying of Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters for - 304 Grade including Labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish.including Overheads & Contractors profit .

Supplying and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5 mm thick/ 9.5 mm thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm conforming to IS 2095 - 1982 fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200 mm c/c and fixing the 12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm and finishing two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification.including Overheads & Contractors profit .

First class Ornamental plastering 1" to 1 1/4"thick with base plastering 1/2"to 3/4" in cm (1:3) and top finishing 1/2" thick with cm(1:3)and top finishing 1/2'' thick wioth CM(2:2) to bring the required ornamentation, fine rendering with neat cement including cost and convyeyance of all materilas, labour charges, all incidental and operational charges, curing etc., complete. To the required shape and size as per the approved Drawing and as per silpi Norms including preparation and fixing of precast pillars. Wherever necessary unit-10 sqm.including Overheads & Contractors profit .

Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the sameincluding Overheads & Contractors profit .

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).including Overheads & Contractors profit .

Providing and laying of cinder concrete in cement cinder mix (1:1.5)prop. Using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyence of all materials , water to the wirk site, seinerincluding Overheads & Contractors profit .

Providing and fixing flooring with full depth jointing and pointing to the Vitrified/ Ceramic Tile flooring in specified thick for tiles of any sizes with epoxy emulsion grout/ synthetic / resin adhesive in width of 3-5 mm with Nylon spacers excluding cost of tiles.including Overheads & Contractors profit .

SPECIALISED HIGH PERFORMANCE ACRYLIC POLYMER MODIFIED ELASTOMERIC CEMENTITIOUS WATERPROOFING SYSTEM COATINGTO THE WET AREA /a ) First Layer - Supply and Apply penetrative cum bonding primer as base primer cum sealer coat using equivalent modified with water and cement at the ratio 2:1:3 (MIXPRIME AC 100 : water : cement) by volume with a slow speed mixer machine. This compoundshall be applied with sufficient thickness to cover the holes/pores/cracks @ 1.000 Liter /SQM and the raw primer should be complain with ASTM 4541 and the Solidcontent 49% +2% b ) Second Layer – Supply and apply of 2 x2 mm welded with alkaline resistant coated / non-woven 40 Gsm verging fiber mesh or equivalent for a minimum over lap of 100 mm embedded inthe primer coatc ) Third Layer - Supply and apply of first coat of two component (Powder + Liquid) system of high performance acrylic polymermodified elastomeric cementitious waterproofing system or equivalent @ 1.000 Kg / SQM ( mix the powder and liquid with the help of a slow speed mixer for a period of 2 to 3 minutes up to get a homogeneous mix- dilution or modification not recommended) should be complain with BS 1881 Part 5 1983 (ISAT 476 Part 6), DIN 1048 Part 5 1991, BSEN 12390-8 2000, ASTM D 412-92 d ) Fourth Layer –Supply and apply of second coat of two component (Powder + Liquid) system of high performance acrylicpolymer modified elastomeric cementitiouswaterproofing system equivalent @ 1.000 Kg / SQM ( mix the powder and liquid with the help of a slow speed mixer for a period of 2 to 3 minutes up to get a homogeneous mix- dilution or modification not recommended) should be complain with BS 1881 Part 5 1983 (ISATincluding Overheads & Contractors profit .

VRCC M-25 grade design mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using (20mm 60%, 10mm 30% & 6mm 10%) size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, including centering shuttering :including Overheads & Contractors profit .

c.Roof Slab 175 mm thick

d. Roof Slab 200 mm thick

VRCC M-25 grade design mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using (20mm 60%, 10mm 30% & 6mm 10%) size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, including centering shuttering :including Overheads & Contractors profit .

b. M-25 GRADE Design MIX FOR Plain Sunshade 0.6 Mt wide 1.00 Mt length (1 Smt) 3" to 2" thick (G.F)9 WITH STEEL CENTERING)

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including all operational, incidental such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Reinforced Brick Masonry 11.5cm (4 1/2") thick for partition walls in CM (1:4) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. and placing 2nos. of 6mm dia MS bars embedded in every 3rd layer with free ends of reinforcement keyed into mortar joints of the main brick work whereever applicable including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., but excluding cost and conveyance of steel and its fabrication charges complete but excluding seigniorage charges for finished item of work. (APSS No. 501 & 504).including Overheads & Contractors profit .

Providing and fixing factory made uPVC white colour sliding glazed window upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks,EPDM gasket,wool pile,zin calloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes forfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer -in -Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).including Overheads & Contractors profit .

Providing and fixing factory made uPVC any colour fixed glazed Ventilators comprising of uPVC multi chambered frame andmullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket/TPV,G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plasticpackers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of required size and of approved quality, allcomplete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant.Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.Fixed Ventilators made of (small series) frame 47 x 50mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension.including Overheads & Contractors profit .

S&F of M.S.Grills of any design for Doors and Windows including fabrication and fixing charges etc. Complete.including Overheads & Contractors profit .

Supply and fixing doors as per drawings with medium teak wood frame of section 115 mm x 75 mm and ISI marked flush door shutters of 35 mm thick double shutters Flush door shutters,solid bond wood block board type with teak ply on both faces. conforming to IS:2202 including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1500mm x 2100mm)

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MMtop and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. Aminimum of 4 hinges will be required for fixing the door with the frame Complete.including Overheads & Contractors profit .

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer onall the six surfaces. The door frame will have are bat of 32MM Door Frame section of 45x90 MM . The two Vertical members are to be joined together with the horizontal member using 8x60 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.including Overheads & Contractors profit .

Plain Cement Concrete M15 (1:2:4) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 20mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402) PCC-M15(1:2:4)

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) For Internal Plasterings

a. Ceiling Plastering 2 coats

b. Internal Wall plastering 2 coats

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) External Plasterings

Flooring with glazed vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality confirming to IS:13711,IS:13712,IS:13630 (Parts 1to 15) of any colur and finish in all shades and designs. as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing skirting/Dadooing to internal walls to 10 cm height/risers of steps with glazed vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality 1st quality conforming to IS 13711 & I13712 &IS13630 length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work, but including the cost of conveyance of all materials.including Overheads & Contractors profit .

Flooring with Non-skid red or white full body Ceramic floor tiles of Size 450 mm x 450mm and thickness between 7-8 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts1to15) of any colour and finish in all shades and designs 7.30mm thick , 1st quality and of size as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

Providing dadooing to walls with Supply of screen printed glazed full body ceramic wall tiles of size 300 x600 mm with any type of design texturesuch as marble finish, wooden,bamboo,stone finishes etc.,scratch less,stainfree and thickness between 6-8 mm 1stquality conforming to IS:13711,IS:13712,IS:13630 (Parts1to15) of any colour and finish in all shades and designs as approved by the Engineer-in-charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads & contractors profit complete for finished item of work.

Flooring with Moon white 18-20mm thick upto 2.43m granite stone slabs (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Flooring with Cheery red 18-20mm thick upto 2.43m granite stone slabs (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Providing cladding/Skirting to walls with Cherry Red length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads & contractors profit complete for finished item of work.

Providing and applying wall putty of White Cement or Polymer or Cement based over plastered surface to prepare the surface even and smooth after throughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean&wipe off loose dust, applying knifing paste filler by putty knife/muslin pad, air dry for 2 to 3 hours , sand with 180 and 320 nos emery paper for the surface prepartion including cost and conveyance of all materials to work site and all perational , incidental, labour chartges etc., complete for finished item of work for internal walls.including Overheads & Contractors profit .

Painting to new walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. approved brand,of first grade over cement primary making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and operational, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work as per SS911 for internal walls.including Overheads & Contractors profit .

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. as per SS911 for External walls.

Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre of approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other taxes on cost of all materials etc.and overheads & contractors profit complete (APSS No.1200, 1207 & 1211) in all floors.

Polishing two coats to teak wood doors using French spirit polish of approved brand for new wood work to teak wood frame and shutters including sand papering to smooth surfaces etc. including cost and conveyance of all materials to site, all labour charges etc., complete for finished item of work in all floors.including Overheads & Contractors profit .

Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work in all floors.( APSS No.126)

Laying of Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters for - 304 Grade including Labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish.including Overheads & Contractors profit .

Supplying and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5 mm thick/ 9.5 mm thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm conforming to IS 2095 - 1982 fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200 mm c/c and fixing the 12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm and finishing two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification.including Overheads & Contractors profit .

First class Ornamental plastering 1" to 1 1/4"thick with base plastering 1/2"to 3/4" in cm (1:3) and top finishing 1/2" thick with cm(1:3)and top finishing 1/2'' thick wioth CM(2:2) to bring the required ornamentation, fine rendering with neat cement including cost and convyeyance of all materilas, labour charges, all incidental and operational charges, curing etc., complete. To the required shape and size as per the approved Drawing and as per silpi Norms including preparation and fixing of precast pillars. Wherever necessary unit-1 sqm.including Overheads & Contractors profit .

Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the sameincluding Overheads & Contractors profit .

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Providing and laying of cinder concrete in cement cinder mix (1:1.5)prop. Using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyence of all materials, water to the wirk site, seinerincluding Overheads & Contractors profit .

Providing and fixing flooring with full depth jointing and pointing to the Vitrified/ Ceramic Tile flooring in specified thick for tiles of any sizes with epoxy emulsion grout/ synthetic / resin adhesive in width of 3-5 mm with Nylon spacers excluding cost of tiles.including Overheads & Contractors profit .

SPECIALISED HIGH PERFORMANCE ACRYLIC POLYMER MODIFIED ELASTOMERIC CEMENTITIOUS WATERPROOFING SYSTEM COATINGTO THE WET AREA /a ) First Layer - Supply and Apply penetrative cum bonding primer as base primer cum sealer coat using equivalent modified with water and cement at the ratio 2:1:3 (MIXPRIME AC 100 : water : cement) by volume with a slow speed mixer machine. This compoundshall be applied with sufficient thickness to cover the holes/pores/cracks @ 1.000 Liter /SQM and the raw primer should be complain with ASTM 4541 and the Solidcontent 49% +2%b ) Second Layer – Supply and apply of 2 x2 mm welded with alkaline resistant coated / non-woven 40 Gsm verging fiber mesh or equivalent for a minimum over lap of 100 mm embedded inthe primer coatc ) Third Layer - Supply and apply of first coat of two component (Powder + Liquid) system of high performance acrylic polymermodified elastomeric cementitious waterproofing system or equivalent @ 1.000 Kg / SQM ( mix the powder and liquid with the help of a slow speed mixer for a period of 2 to 3 minutes up to get a homogeneous mix- dilution or modification not recommended) should be complain with BS 1881 Part 5 1983 (ISAT 476 Part 6), DIN 1048 Part 5 1991, BSEN 12390-8 2000, ASTM D 412-92d ) Fourth Layer –Supply and apply of second coat of two component (Powder + Liquid) system of high performance acrylicpolymer modified elastomeric cementitiouswaterproofing system equivalent @ 1.000 Kg / SQM ( mix the powder and liquid with the help of a slow speed mixer for a period of 2 to 3 minutes up to get a homogeneous mix- dilution or modification not recommended) should be complain with BS 1881 Part 5 1983 (ISATincluding Overheads & Contractors profit .

VRCC M-25 grade design mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using (20mm 60%, 10mm 30% & 6mm 10%) size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges, sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, including centering shuttering :including Overheads & Contractors profit .

b. 230 mm thick side walls

d. Roof Slab 175 mm thick

e. 200mm thick slab

VRCC M-25 grade design mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using (20mm 60%, 10mm 30% & 6mm 10%) size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, including centering shuttering :including Overheads & Contractors profit .

b. M-25 GRADE Design MIX FOR Plain Sunshade 0.6 Mt wide 1.00 Mt length (1 Smt) 3" to 2" thick (G.F)9 WITH STEEL CENTERING)

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and including all operational , incidental such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Providing and fixing factory made uPVC white colour sliding glazed window upto1.50m in height dimension comprising of uPVC multi chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.60±0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks,EPDM gasket,wool pile,zin calloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes forfixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer -in -Charge inclusive of cost of Single/double glasspanes, wiremesh and silicon sealent.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x44mm & sash 32 x 60 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).including Overheads & Contractors profit .

S&F of M.S.Grills of any design for Doors and Windows including fabrication and fixing charges etc. Complete.including Overheads & Contractors profit .

Supply and fixing doors as per drawings with medium teak wood frame of section 115 mm x 75 mm and ISI marked flush door shutters of 35 mm thick double shutters Flush door shutters,solid bond wood block board type with teak ply on both faces. conforming to IS:2202 including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1500mm x 2100mm)including Overheads & Contractors profit .

Plain Cement Concrete M15 (1:2:4) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 20mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402) PCC-M15(1:2:4)

Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) For Internal Plasterings

a. Ceiling Plastering 2 coats

b. Internal wall Plastering 2 coats

Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) External Plasterings

Flooring with Cheery red 18-20mm thick upto 2.43m granite stone slabs (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Providing cladding to walls with Galxy Granite 18-20 mm thick upto 2.43m (Premium Quality) (2.43 M) other than black and regular colours, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads & contractors profit complete for finished item of work

Providing cladding/Skirting to walls with Cherry Red length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads & contractors profit complete for finished item of work.

Providing and applying wall putty of White Cement or Polymer or Cement based over plastered surface to prepare the surface even and smooth after throughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean&wipe off loose dust, applying knifing paste filler by putty knife/muslin pad, air dry for 2 to 3 hours , sand with 180 and 320 nos emery paper for the surface prepartion including cost and conveyance of all materials to work site and all perational , incidental, labour chartges etc., complete for finished item of work for internal walls.including Overheads & Contractors profit .

Painting to new walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. approved brand,of first grade over cement primary making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and operational, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work as per SS911 for internal walls.including Overheads & Contractors profit .

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. as per SS911 for External walls.

Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).

Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre of approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other taxes on cost of all materials etc.and overheads & contractors profit complete (APSS No.1200, 1207 & 1211) in all floors.

Polishing two coats to teak wood doors using French spirit polish of approved brand for new wood work to teak wood frame and shutters including sand papering to smooth surfaces etc. including cost and conveyance of all materials to site, all labour charges etc., complete for finished item of work in all floors.

Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work in all floors.( APSS No.126)

First class Ornamental plastering 1" to 1 1/4"thick with base plastering 1/2"to 3/4" in cm (1:3) and top finishing 1/2" thick with cm(1:3)and top finishing 1/2'' thick wioth CM(2:2) to bring the required ornamentation, fine rendering with neat cement including cost and convyeyance of all materilas, labour charges, all incidental and operational charges, curing etc., complete. To the required shape and size as per the approved Drawing and as per silpi Norms including preparation and fixing of precast pillars. Wherever necessary unit-1 sqm.including Overheads & Contractor profit.

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

INTERNAL & EXTERNAL ELECTRICAL WORKS

Supply and fixing of 25mm outer dia 2.20 mm thick Heavy grade with IS:9537 part 3 FRLS regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required MS deep boxes and all accessories including and labour charges etc., complete. Makes:- VIP / Besto

Supply and Fixing of 25mm outer dia Medium grade ( 1.8 mm Thick ) with IS:9537 part 3 FRLS regid P.V.C. pipe (ISI MARK) concealed in wall with all required MS Deep Boxes and all accessories including masonary work for light, fan and separate plug point with MS modular switch box including all labour charges etc., complete. for EPABX, LAN, and CCTV, Run of mains, light, fan points. Makes:- VIP / Besto plast / GoldMedal / Million plast / GM / Sudhakar / Polyline

Supply and Fixing of 32mm outer dia Medium grade ( 2.1 mm Thick ) with IS:9537 part 3 FRLS regid P.V.C. pipe (ISI MARK) concealed in wall with all required MS Deep Boxes and all accessories including masonary work for light, fan and separate plug point with MS modular switch box including all labour charges etc., complete. for EPABX, LAN, and CCTV, Run of mains, light, fan points. Makes:- VIP / Besto plast / GoldMedal / Million plast / GM / Sudhakar / Polyline

Supply and Fixing of 20mm outer dia medium grade (1.55 mm thick) confirms to IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required MS junction boxes and all accessories including masonary work for run of mains including all labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP/GoldMedal/ Million plast / GM / Sudhakar /Anchor/ Polycab

Supply and erecting MS Galvanished fan hook box with hook in RCC slab including all Labour charges etc., complete.

Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose/BH/SBH Modular switches with cover plate including all labour charges etc., complete for Light, Fan, Exhaust Fan etc., complete. (for Residential Building) Makes of wires:- Finolex / RR kabel / Havells / APAR E-beam / KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano/ GM-Zenova / Legrand Myrius / Cabtree Thames Platinum / GM- Zicono/ / Million / Logus / Gold Medal Curve / GIFA / CPL/ Panasonic Vision / Salzer S 90 Series.

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes : Anchor / Gold Medal Olive /Million Zoom at Agali

Wiring with 2 of 22/0.3mm ( 1.5 Sq.mm) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI marked) in existing pipe with 1 No of 6A (ISI marked) modular type switches and 1 No of 6A, 3/2 pin modular type socket with cover plate fixing on existing, separate modular switch box including all labour charges etc., complete. Makes of wires:- Finolex / RR kabel / Havells / APAR E-beam / KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano/ GM-Zenova / Legrand Myrius / Cabtree Thames Platinum / GM- Zicono/ / Million / Logus / Gold Medal Curve / GIFA / CPL/ Panasonic Vision / Salzer S 90 Series.

Supply and Fixing of 32A modular type Double Pole switch with indicator with suitable cover frame and modular switch board including cost and conveyance of all material and all labour charges etc., complete for master control of individual hostel rooms/record rooms etc., as required at site. Makes of wires:- Finolex / RR kabel / Havells / APAR E-beam / KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar Makes of switches:- Legrand Arteor / Schneider Zen celo/ Crabtree Murano/ GM-Zenova / Legrand Myrius / Cabtree Thames Platinum / GM- Zicono/ / Million / Logus / Gold Medal Curve / GIFA / CPL/ Panasonic Vision / Salzer S 90 Series.

Supply and Fixing of 32A modular type Double Pole switch with indicator with suitable cover frame and modular switch board including cost and conveyance of all material and all labour charges etc., complete for master control of individual hostel rooms/record rooms etc., as required at site. Makes:Legrand(Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Lauritz Knudsen-englaze (Formerly L&T)/ GM-(Four-Five)/Goldmedal(GIFA)/Million (M-VEE)/Anchor (Roma PLUS)/Precision(Series7)/Honeywell(Blenzepro)

Supply and fixing of 18W/20W, 1200mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes: Prolite / Pasolite/SIieger/Koncept/Vibrant b) LED MAKE : PHILIPS LUMILEDS / CREE /

Supply and Fixing of heavy duty 18 W LED Down lighter, suitable for recessed/surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10% with high power LED's having efficacy of > 120 lumens / watt, CCT: 3000K - 5700K, minimum CRI > 70, luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete including fixing in the ceiling with recessed/surface mounting, cost of all accessories and giving connections etc., complete with 5 years warranty. Make: a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready/ FortuneArrt/ Rhino/Panasonic b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 5W LED bulb (for new installation). Makes : Gold Medal /Million / Vimal

Supply of 1200 mm (48") sweep ISI Mark Ceiling/wall Fan as per IS 374 -1979 and 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories. Makes: Crompton / Bajaj Kassels 50 / Usha atom

Supply and erecting Electronic type regulator for ceiling fans 1200 mm sweep complete erected on existing board.Make : Anchor / Gold Medal Olive / Million Zoom

Labour charges for Fixing of Ceiling fan including transportation and giving connections with twin core wire etc., complete.

Supply and erecting 19/20mm steel tube down rod of 0.6 mt length with bolts & nuts duly painted with matching colour of fan complete

Supply and Transportation of 12" (300mm) Light duty exhaust fan with metalic blades and wire guard etc complete. Makes: Crompton / Bajaj Bahar WG / Havells Ventil Air- DB / Orient hill air

Supply and Transportation of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark. Makes: Crompton / Almonard / Havells Turbo Force

Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete

Supply and fixing of louver shutter suitable for 12" Exhaust fan including all labour charges etc complete with connections and colouring matching to the wall with enamel paint.

Supply, transportation of 60W LED HIgh Bay Luminaire with high power COB LED made of pressure diecast alluminium housing with powder coated,Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having efficacy >120 lumines/watt, System efficacy >95lm/W and junction temprature < 70°C, with Ingrees protection IP66, IK05, Driver surge protection 4KV, external Surge protection ≥ 5KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete including fixing to the ceiling at Entrance Foyer with necessary mounting arrangement cost of all accessories and giving connections etc., complete with 5 years warranty.. a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG

Supply and Fixing of 10W LED Mirror light fitting with Pressure die cast alluminum with opal diffuser with water tight clear glass with hinged wire guard etc., complete with IP 65 Protection. Makes : Philips/Bajaj / Crompton / Surya / Havells/HPL.

Supply and fixing of 16" (400mm) Wall mounted Fan. Makes: Crompton High Flow / Bajaj Elite / Havells Swing Premia gold / Orient Wall 45

Supply and fixing of 8W TPN Distribution board with IP-43 protection (Metal Door) suitable for 3 phase ELCB / RCCB / FP Isolator as 40A FP Isolator - 1 No for incomer, and 10kA-6-32A SP MCBs - 24Nos for outgoing. incomer and 10kA SP MCBs as outing going including internal connection and labour charges for flush mounting etc., complete.4 way ETPN, D.B with IP-43 Protection (MD) suitable for 3 phase

Supply and erection of Panel mounting 63A, 4 Pole,16kA, MCCB with thermal magnetic setting / Microprocessor based release arrangement with all connections etc., complete on existing panel. [for Lift Machine Room power supply] Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/L&T-AU [for Lift Machine Room power supply] Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager -Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/L&T-AU

Supply and fixing 8W SPNDB in sheet steel enclosure with metalic plug and socket with 1 No. 20/32A,10KA 'c' curve SPMCB (Motor characteristics MCBs) control including making connections etc., complete concealing in wall. SPN 8 way D.B with IP-43, 63A DP MCB - 1 No for incomer, 10kA-6-32A SP MCBs - 6 Nos for outgoing. Makes : Legrand(Ekinox 3) / Schneider.

Supply and Fixing of 6-32A, 10 KA breaking capacity 'c' curve double pole MCB in sheet steel DP enclosure with IP 20 Protection etc., complete as per IS 8623; IS 13032; IEC 61439-3 including making connections etc., complete on wall. [for UPS Input/Output control etc.,] Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager - Novello+/ Seimens/L&T-Newrange and Makes for MCBs: Legrand- DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes of wires:- Finolex / RR kabel / Havells / APAR E-beam / KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar

Supply and run of 3 of 2.5 sq.mm (phase neutral and earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits including labour charges etc., complete as required for switch boards. Makes of wires:- Finolex / RR kabel / Havells / APAR E-beam / KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar

Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains including labour charges etc., complete as required including labour charges for 16A sockets & AC'S. Makes of wires:- Finolex / RR kabel / Havells / APAR E-beam / KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar

Supply and run of 3 of 84/0.3mm (6.0 sq.mm) FRLS / HFFR PVC insulated 1100 V grade as per IS: 694 / 1990 specifications for flexible copper cable and one run of 36/0.3mm 2.5 sq.mm flexible copper wire for earthing in existing PVC conduit pipe for circuit mains including labour charges (phase neutral and earth) etc., complete as required for switch board circuit mains. Makes of Wires : Finolex / RR Kabel

Supply and run of 5 of 84/0.3mm (6.0 sq.mm) FRLS / HFFR PVC insulated 1100 V grade as per IS: 694 / 1990 specifications for flexible copper cable and one run of 36/0.3mm 2.5 sq.mm flexible copper wire for earthing in existing PVC conduit pipe for circuit mains including labour charges (phase neutral and earth) etc., complete as required for switch board circuit mains. Makes of Wires : Finolex / RR Kabel

Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as perspecification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/ Polycab (ELEC-4.1.1)

3.5 core, 240 Sq.mm

3.5 core, 150 Sq.mm

3.5 core, 50 Sq.mm

4 core, 16 Sq.mm

4 core, 10 Sq.mm

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.

3.5 core, 240 Sq.mm

3.5 core, 150 Sq.mm

3.5 core, 50 Sq.mm

4 core, 16 Sq.mm

4 core, 10 Sq.mm

Providing independent earthing by excavating a trench to a depth of 2.5 M in all soils, as per size specified in the Data, using 100mm dia Heavy gauge Flange C.I ( Cast iron ) pipe of 2.5 Mtrs length with necessary accessories duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete.

Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete.

Supply and Run of 25mm x 6 mm G.I Strip including cost of all accessories and labour charges etc., complete.

Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 150 Sq,mm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials a

Supply installation Testing and commissioning of 6.0 KVA , 192/240V DC UPS with Isolation transformer on line UPS system confirms to IS 16242(Part-I):2014 and IEC 60240-1 : 2008 with IGBT technology pure sine wave out put, double conversion with auto and manual static by pass switch single phase input / Single phase output. Makes: Numeric/APC/Consul Neowatt/Sakshham /Emerson

Supply and fixing of 12V 65 AH SMF battery with 3 years warrenty including wire leads,connections etc complete., Makes: Quanta / Racket / Exide.

Supply and providing of battery rack upto 20 to 30 batteries (65 & 100 AH)

Supply and laying of RG6 co-axial cable in the existing metallic/non metallic conduit pipe with connections etc.,complete for TVs Makes: Finolex/ Million / Gold Medal / Polycab

Supply and fixing of 2 Line telephone jack type socket moduallr type with front and back plate in MS box with screws connections etc., . Makes:Legrand Arteor / Schneider Zen celo/ Crabtree Murano/ GM-Zenova

Supply and laying of 2 pair telephone wire 0.5mm copper in the existing metallic/non metallic conduit pipe with connections etc.,completeTelephone wire Makes: Finolex / Delton / Surabi / Polycab

Supply and Installation of 10 Pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Makes: Krone or equivalent make.

Supply, transportation & installation of 2.0 ton 3 star INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation with copper condenser. Makes: Mitsubishi / O General /Toshiba (prevailing models in the market)

Supply and erecting fully automatic line voltage stabilizer for operation on input voltage 200 to 250V. rated for 5 KVA maximum load and time delay model with Volt meter, selector switch, 6A / 16A flush type, 5 pin socket for out put and with 3 core flexible chord and 3 pin 6/16A plug top suitable for refrigerator for continuous operation including cost and conveyance of all mateials and all labour charges etc., complete. Makes: V-Guard / Real Guard / Uni Stab / ITL.

Supply, Fabrication of 1set MS bracket suitable for fixing out door unit of 3.5 /4.50 TR split AC unit.

Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for split/Casseete Air- Conditioner including foaming etc., complete. Make: Copper:Totaline /Nippon /Mandev. Nitrile Insulation: Kflex/ Totaline /Armaflex

Supply,transporatation & installation of following sizes of Hot Dipped Galvanized Iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete

100mmx50mmx1.6mm

150mmx50mmx1.6mm

300mmx50mmx1.6mm

Supply, Installation, Testing and Commissioning of 6 U(44 mm ) Wall mounted Communication rack in one section with glass doors, swing handles, lock, Top and Bottom Cable entries, supports for mounting rack on wall, Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers, power supply box for supplying power to hubs, fans etc., along with earth continuity kit, MCB, indicator, moulded power supply cable, Blank panels, sliding shelves etc. Make: APW/HCL/Valrack/Netrack/R&M

Supply, laying, testing and commissioning of 4-pair, Cat-6 Solid (Third party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, UTP Cable , Meets or exceeds ANSI/TIA- 568-C.2 and UL Listed &RoHS Compliant in the existing raceways /pvc conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching stripping crimping and testing required etc., complete Makes: Systimax /Panduit/ Siemond/ Legrand

Supply and Fixing installation testing and commisioning of1no of Cat-6 Tooless built-in crimping mechanism Information Outlet with Dust Cover Exceed ANSI/TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A,T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant. Makes: Systimax /Panduit/ Siemond/ Legrand

Supply installation testing and commisioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended patch cords along with 2 nos of RJ 45 connectors with strain relief boots compatible to T568A,T568B specifications including making connections to information outlets of length - 1mtr/3 ft Makes: Systimax /Panduit/ Siemond/ Legrand.

Supply installation testing and commisioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended patch cords along with 2 nos of RJ 45 connectors with strain relief boots compatible to T568A,T568B specifications including making connections to information outlets of length - 2 mtr/7 ft Makes: Systimax /Panduit/ Siemond/ Legrand

Supply and Fixing, Installation, Testing and Comissioning of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS Chasis, powder coated Modular Patch Panels (upgradable to intelligent panels with use of sensor strips) with collapsible shutters on jacks to support latest ammendments of TIA / EIA Cat 6 Specifications in Existing Communication Rack along with necessory connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps. 1) 24 Ports Patch Panels Makes: Systimax /Panduit/ Siemond/ Legrand

Supply, Transportation and fixing of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with SS tank and ABS plastic body of 15 Lites capacity to withstand up to 6.5 bar of water pressure including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and all labour charges etc., complete. Makes : Crompton Solarium BLX / Jaquar Elena / Venus Lyra / Racold Eterno Swift / AO Smith HSE SDS /Havells Puro Turbo/Warmex

FIRE FIGHTING WORKS

Supplying , installation , testing and commissioning of electric driven Terrace / Booster pump suitable for automatic operation and consisting of following : complete in all respect as required. a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 900 lpm at 45 Mtr head conforming to IS 1520 b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. Makes of Pumps : Kirloskar / Mather&Platt. Makes of Motors : Siemens / ABB / Kirloskar

Supply and Transportation of XLPE/PVC insulated & PVC sheathed unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc complete Make: Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/orbit /Paragon/RR Kabel/RPG 12 C x 2.5.sqmm

Providing, installation, testing and commissioning of dual Plate non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required Makes: BDK / NEU-G / Leader/ Zolotto / SANT/Honeywell

Supply and installation testing and commissioning of Pressure switches of suitable range (0 to 10 bar) for pumpsets complete with necessay Ball valves, Fittings like unions / colors / reducers etc. (Standard type for main pump & Differential type for Jockey Pump)

HYDRANT SYSTEM, ABOVE GROUND PIPING:- Providing , laying, testing & Commissioning of following classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete. Makes: Jindal / Hissar / Tata pipes/Prakash Surya

7 a)Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required including Labour and transportation cost for finished item of work as per the instructions of engineer in charge. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/ Zolotto / Intervalve.

Supplying, erecting and commissioning of Landing Hydrants comprising of the following in the Fire duct:-

7 a)Supplying and fixing SINGLE headed Internal / External hydrant valve with instantaneous Gun metal/Stainless steel couplings of 63mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required. Makes: Newage/ Winco/ Padmini / Safex/Minimax/ Newtech/Honeywell

7 b)Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required. Makes: Newage/ Winco/ Padmini / Safex /Minimax /NewTech/ Honeywell.

7 c)Supply and fixing 63mm dia Gun metal branch pipe with 20mm (Nominal internal diameter) size Gunmetal / conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.Make: Mini Max / Safex / Newage / Winco / Padmini.

Supplying and fixing First -Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to Is 884 with upto date amendments, complete with the following as required. a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose Thermoplastic / Textile reinforced / Rubber hose Thermoplastic / Textile reinforced / Rubber braided / Polypropylene Type - 2 as per IS:12585 Make: Eversafe/ Reliance/ Newage/ SRI, b) 20mm (Nominal internal) dia gun metal globe valve and nozzle. Make: Newage / Winco / Padmini / Safex.c) Drum and brackets for fixing the equipments on wall. d) Connections from riser with 25mm dia stop valve (gun metal) & MS pipe.

Supplying and fixing of hose cabinet of size 750mm X600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required. makes:Minimax/Safex/Newage/Winco/Padmini/NewTech

Supply, installation, testing and commissioning of 25 /20mm dia Air Release Valve Makes : Zoloto / Leader / SANT

Supply, installation, testing and commissioning of 25mm dia Ball valve Makes : Zoloto / Leader / SANT/NEU-G

FIRE EXTINGUISHERS

Supply and fixing of Ceiling Mounted ABC MAP 90, 4Kg stored pressure type, pressure gauge, Gross Wt. 6.9 kg, Empty Wt. 2.9 kg, Can Ht264mm , Dia 240mm, Discharge time : less than 13 sec, IS 15683 : 2006 Auto discharge mechanism on temperature rise, Applicable on A,B,C, & Electrically - started fires, Can Construction: Forging & Machining, Internal coating of Can: Epoxy Power coating, External Coating of Can: Epoxy Polyster powder coating, sheet metal thickness:1.60mm , Helium leakage detection tested, ISI approved with 5 years warranty (Cease Fire / Minimax make) Including transportation, all taxes and all labour charges etc complete.

Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg capacity confirming to IS2878 made from ISI marked steam less cylinder confirming to IS:7285 & CEcertified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warrantyIncluding transportation, all taxes and all labour charges etc complete.. Makes : Cease Fire / Minimax

Supply and fixing of 4Nos of 9 Ltrs capacity round bottom sand buckets along with bucket sand, Fire buckets with round bottom type enamel painted, white inside & red out side and letter FIRE inblack out side & Handle with mounting bracket.

Supply and fixing of Fire bucket stand fabricated by M.S. angles to install for Four numbers of buckets as per local fire officers standards.

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake wi

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaquar Continental series, Chrome Finish with 7 years warranty

Supplying & fixing 15 mm bib tap with flange Chromeum plated Jaquar make queen series

Basic rate as per ssr itemcock 12.7 mm diafirst quality Indian Make heavy duty

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nom

Supplying & Fixing 31.75 mm C.P bottle trap (Heavy type) Parryware or equivalent

Basic rate as per ssr item 12.7MM DIA PVC conection with brass union nut CP coated

Supply & fixing Angular stop cocks with wall flange Jaquar make Queen series with 7 years warranty: Chrome plated

Supply & fixing Waste coupling 32 mm size full thread with 80 mm heightJaquar make with 7 years warranty: Chrome plated

Supply & fixing 31.75mm dia PVC flexible waste pipe of 914.4 1 Lit 5 mm length of Ist quality

a) Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors.

Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 30

Supply & Fixing wall mixer with telephonic shower arrangement with crutch and telephone shower with flexible tube Jaquar make Florentine(Quarter turn) series Chrome colour for bath tub with 7 years warranty

Supplying & fixing SINGLE BOWL stainless steel sink size 24"x18"x8 "(609.6 x 457.2 x 203.2mm) 1 mm thick with accessories including cost & conveyance of all materials, labour charges, etc. overhead & contractor's profit complete for finished item of wo

PVC PIPES & FITTINGS

Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc with solven

75 mm dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm

110 mm dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm

Supplying & fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work.

CPVC PIPES & FITTINGS

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same phy CPVC-SDR-11

S&F premium make CPVC Pipes of 22.20mm OD Pipe - SDR 11

S&F premium make CPVC Pipes of 28.60mm OD Pipe - SDR 11

S&F premium make CPVC Pipes of 34.90mm OD Pipe - SDR 11

S&F premium make CPVC Pipes of 41.30mm OD Pipe - SDR 11

S&F premium make CPVC Pipes of 54mm OD Pipe - SDR 11

Supply and fixing of UPVC Pipes and Fittings SCH-40 Grade to meet the requirement of ASTM-D 2846 for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labor charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.65mm dia OD pipe

Supplying and fixing PPR ball valve of confirming to DIN standards 8077/8092 , Indian make heavy type including cost and conveyance of all materials , labour charges etc. complete for finished item of work.

20mm PPR Ball valve

25mm PPR Ball Valve

32mm PPR Ball Valve

50mm PPR Ball Valve

63mm PPR Ball Valve

SWG SP-1 PIPES:-Supplying, laying, jointing and testing 152.4 mm SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 1524

MAN HOLES & INSPECTION CHAMBERS - AS PER - IS 4111 : Part 1 : 1986: Supplying & fixing 150 mm x 100 mm SWG gullytrapsconforming to ISI 651 & 4127 with C.I Grating & Cost.Brick masonry in CM 1:6 prop. Intermediate chamber andfitted with304.8 mm x 288.6mm (12"x9") C.I Frame andhinged cover

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

MANHOLE UP TO .60 MTS

MANHOLE UP TO .91 MTS

Supplying & fixing 50.8 cm dia C.I. Man hole frame & cover for 914.4 mm dia chamber (20 Kgs - Light weight)

Providing & laying in position RCC hume pipes & collars of NP2 class conforming to IS standards, including all lead & lift, lowering the pipes & collars, making joints with hemp yarn, CM 1:2, curing the joint for 7 days etc complete. 200mm diameter

Supply, Transportation, erection and Commissioning of MNRE approved and confirming to IS 12933 P-1,2,3&5......... Tube Collector type Solar Water heating System with temperature application of 60 degrees with Stain less steel - 304L grade inner tank with PUF Insulation and Aluminum Cladding for Outer Cover, suitable EPDM rubber pipe connection from Collector to Solar Tank with electrical Heating back up etc., with 3 years Guarantee for Solar system and additional 2 years warranty. Makes: As per list of recommended brands.

Supply, Transportation and fixing of Energy Efficient Heat pump(Hybrid) water heater of Mono block storage / type Vertical / 230/250V single phase 50 Hz rated water heater with SS tank coated with Enamel and stain less body with IP X 4 water proof grade of ...... capacity Mono Block unit to withstand up to 0.8 - 1.0 MPa bar of water pressure including 2 Kw Heating element and Auto Defrosting and with 50 MM puf insulation with all standard accessories and dead weight pressure reducing valve on out let side, including cost of CPVC Piping / Metallic hose pipe, testing and all labour charges etc., complete. Makes: As per list of recommended brands.

Supply and fixing of heavy duty C.P. connection for storage water heater for inlet and outlet of length 300-600 mm including the cost of nuts, washers etc as required.

S & F NP soap dish heavy type with NP SCREWS

a) S & F 19.04 mm dia& 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws

Supply and fabrication of MS Item

Earth work excavation for foundations (Mechanical Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and 1m additional lift charges over the initial depth up to 3m including all oper

Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental ,labour charges,hire

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cem

Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site and

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of

VRCC M-25 grade design mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using (20mm 60%, 10mm 30% & 6mm 10%) size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyance charges.

Columns up to plinth beam

Coping beams (Lintel)

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum cru

Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excludi

Supply & application of one coat of deco orient base & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. as per SS911 for External walls.

Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work in all floors.( APSS No.126)

First class Ornamental plastering 1" to 1 1/4"thick with base plastering 1/2"to 3/4" in cm (1:3) and top finishing 1/2" thick with cm(1:3)and top finishing 1/2'' thick wioth CM(2:2) to bring the required ornamentation, fine rendering with neat cement including cost and convyeyance of all materilas, labour charges, all incidental and operational charges, curing etc., complete. To the required shape and size as per the approved Drawing and as per silpi Norms including preparation and fixing of precast pillars. Wherever necessary unit-1 sqm.

Preparation and fixing of M.S.Grills heavy grills like grills to varandah compound wall using chain pulley block,derek pole arrangements etc., in position including cost of Mild Steel squares/Flats etc.,welding rods,power charges and fixing charges etc., complete.

S&F of M.S. TUBES of any design for Doors and Windows including fabrication and fixing charges etc. Complete.

SEPTIC TANK ITEMS

Earth work excavation for foundations (Mechanical Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and 1m additional lift charges over the initial depth up to 3m including all oper

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cem

VRCC M-25 grade design mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using (20mm 60%, 10mm 30% & 6mm 10%) size graded machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, including centering shuttering :

Retaining Wall - 230mm Thick

Roof slab 125 mm thick

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work in all floors.( APSS No.126)

LIFT INSTALLATION

Supply, Installation, Testing and Commissioning of Electric Traction Passenger Lift of Makes: As per list of recommended brands. with • Rated capacity :- 8 Passenger/544Kg • Floors :- G+1 floor (2Stops/2 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MRL • Rated speed :- 1.0/1.25mps VS • Doors type :- COPO/TOPO Doors with frame having clear opening of 800 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of ......mm wide x ......mm deep x ......mm high (a) Rated capacity :- 8 Passenger/544Kg

For Lift having 1800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Four panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows- indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete (A) 1800 MM WIDEX2000MM HIGH

For Lift car having 1800mm wide x 2000mm high clear entrance having 1.5mm thick SS 304 grade sheet car door [four panel] complete with required accessories like door operator mechanism with drive, required aluminum sill, infrared curtain & necessary wiring with interlocking arrangement etc. complete. (a) 1800mm wide x 2000mm high

For Lift travelling above First floor & up to Sixth floor