Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 57 2 BOSEPUKUR PURBA PARA KASBA KOLKATA PIN 700107 | KOLKATA | KOLKATA | WEST BENGAL | 700107 | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹17,000
Closing Date
25 Aug 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AEE (E), IWD on behalf of Director, IISER Kolkata
IISER Kolkata, Mohanpur 741246, Nadia, West Bengal
Supply. Installation, Testing and Commissioning of HEPA FFU in Research Complex W227, under deck insulation work in AAC building, miscellaneous works etc. of IISER Kolkata Mohanpur Campus
2023_IISER_766640_1
IISER-K/IWD/Elect./23-24/08
Open Tender
Electrical Works
Item Rate
60 days
IISER Kolkata, Mohanpur
As per tender document
5 documents required · 5 mandatory
₹500
Yes
IISER KOLKATA
₹17,000
Yes
4 Sept 2023
11 Aug 2023
28 Aug 2023
11 Aug 2023
25 Aug 2023
11 Aug 2023
Amount
Supply and Installation of HEPA fan filter unit: Efficiency 99.97% down to 0.3 micron, 750 CFM (High, Medium, Low mode),Speed regulator, Stainless steel body, D: 1200x600x150mm, Media: Microglass fibre with hot melt separator, Temp: Ambient, Grade-H13, GI tie rod, fast nut, supports, nut-bolt etc. in complete shape. Power supply: 230V, 50HZ. Motor Makes: Krugger, Marathon or any reputed.
Supply and installation of HEPA filter: Efficiency 99.97% down to 0.3 micron, 750CFM (High, Medium, Low mode), Stainless steel body, D: 1180x575x80mm, Media: Microglass fibre with hot melt separator, Temp: Ambient, Grade-H13.
Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal of 0.63 mm thickness rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of 0.8 mm sheet thickness complete as required. Makes: Sail, Jindal, TATA
Supplying and fixing of 19 mm thickness duly laminated aluminium foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. Makes: Supreme, armacell, armaflex, K-flex
Supply, Installation, Balancing and Commissioning of Thermal insulated flexible ducting of diameter 200 mm with necessary arrangement and fittings as required in complete shape. Makes: Twiga or any reputed
Supply and Installation of Air curtain: 3ft. length, 800-1100 CFM, below 60DB,powder coated,400-500W motor,50HZ,230V power supply, ABS motor blower,2100-2700 RPM, Max. Air velocity 21 m/s,moter-2Nos.,Blower-3Nos.Effective height-10ft., Fixing with 10 mm GI tie rood, GI channel, nut-bolt etc. in complete shape. Makes: MNC, Euronics, Mitsubshi
Supply, installation and testing of Limit switch: Rolling lever actuator, 1NO+1NC, 230Volt, 50HZ, 3A, IS standard, Terminal -2.5SQMM, 5-40 Deg. temperature, fixing with necessary screw, nut-bolt, support etc in complete shape. Makes: Siemens, Sneigder, Honeywell, BCH
Supply, installation and testing of portable type dehumidifier: 400-450 square foot area, moisture removal 30 ltrs/day, micro controller, tank capacity 4.5 Ltr., Rated input 260 W, running temperature 5-35 Deg.C, humidity control range 40-80% ,automatic humidistat, tank warning signal, reciprocating compressor, silent type, Refrigerant R134A, continuous drainage, dehumidification ,auto frost, auto reset, ,dryer, wheel connected,230 VAC,50 HZ. Warranty-1 year on Dehumidifier Makes : Power Pye, AMFAH
Under deck Insulation- Supply and fixing of under deck insulation for exposed ceiling by 50 mm thick 40-50 kg/cum density, closed cell elastomeric nitrile rubber class ‘O’ (25 mm class O plain sheet-1st layer & 25mm class O with aluminium foil lamination -2nd layer).The insulation shall be stuck to the slab using hot bitumen/CPRX compound as adhesive and then clamped/screwed to the slab using GI washers and screw of minimum 3 inch long and tape additional screws with washers to support insulation should be provided at interval of 600 mm. Before applying under deck necessary scaffolding at all height required to fix the insulation under ceiling surface as per direction of engineer in-charge. Makes: Armacell, Armaflex, Supreme, K-flex,
Miscellaneous work
Brick work with common burnt clay F.P.S. (non modular) bricks, cement mortar 1:4 (1 cement : 4 coarse sand) for repairing of hole and wall opening as per requirement.
Supply and fixing of heavy duty fiber cement board size: 595x595, thickness 6 mm as per approved sample
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm/continuous board of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge.
With 15 mm thick Tegular edged light weight calcium silicate false ceiling
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .