REPAIR MAINTENANCE AND POLISHING OF WOODEN FURNITURE AT AIR FORCE STATION BAREILLY AND BHOWALI UNDER GE AF BAREILLY

Amount

Chair dining FD-1105/279 S&F new components of Chair Dining made of Ist class HW (shisham) including dismantling of old unservicable one complete all as specified and as directed. (a) Rear leg

(b) Front leg

(c) Rear/front/side rail

(d) Stiffener

(e) Back rest

(f) S & F recanning in 'Godrej' pattern with 2mm wide and 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one complete all as specified and as directed.

(g) Preparation of sufaces by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with French Polish to obtain a glossy finish with and including fixing 4 Nos nylon buffers at the bottom of the chairs after removing old buffers complete all as specified and as directed.

Chair Easy FD-1108/229 S&F new components of Chair Easy made of Ist class HW (shisham) including dismantling of old unservicable one complete all as specified and as directed. (a) Rear leg

(b) Front leg

(c) Arms

(d) Front/back/Side rail of seat

(e) S&F recanning seat & back in 'Godrej' pattern with 2mm wide and 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one complete all as specified and as directed.

(f) Preparation of sufaces by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with french polish with French polish to obtain a glossy finish with and including fixing 4 Nos nylon buffers at the bottom of the chairs complete all as specified and directed.

Chair Writing FD-202/ 250/280 S&F new components of Chair Writing made of Ist class HW (shisham) including dismantling of old unservicable one complete all as specified and as directed. (a) Rear leg

(b) Front leg

(c) Rear/front/Side rail

(d) Arms.

(e) Back rest

(f) Stiffener

(g) S&F recanning seat & back of the chair and recanning in 'Godrej' pattern with 2mm wide and 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one complete all as specified and as directed.

(h) Preparation of sufaces by thoroughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing one or more coats with French Polish to obtain a glossy finish with and including fixing 4 Nos of nylon buffers at the bottom of the chairs complete all as specified and directed.

Sofa sets 4/5 seater FD-281 S&F new components of Sofa Set 4/5 seater made of Ist class HW (shisham) including dismantling of old unservicable one complete all as specified and as directed. (a) Front Legs

(b) Rear legs

(c) Battens

(d) back rail (3 seater)

(e) Front rail (3 seater)

(f) Back rail (single seater)

(g) Front rail (single seater)

(h) Hand rest

(j) M&L for providing new cushion of 32 density cool foam of size (560 x 530)mm x100mm thick including provision of tapestry cloth cover of approved shade & quality with zip on one side openable for easy removing / closing purposes etc.) to cover the foam of size (560 x 530) mm x100mm thick complete all specified and as directed. Note:- Cost of tapestry cloth shall not be less than Rs 350/- per RM. Make of Foam Cushion: Feather foam/sleepwell

(k) M&L for providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality (as per sample held with office) with zip on one side of cover for easy removing / closing purposes to cover the foam of size (560 x 530) mm x100mm thick complete all specified and as directed. Note:- Cost of tapestry cloth shall not be less than Rs 350/- per RM.

Preparation of sufaces of following sofa set by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair writing and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed. (a) Sofa set 4 seater

(b) Sofa set 5 seater

Chair dinning cushioned FD/E6/MAP/10 (R) S&F new components of Chair Dining cushioned made of Ist class HW (shisham) including dismantling old unservicable one complete all as specified and as directed. (a) Rear leg

(b) Front leg

(c) Side/back/front rails

(d) Stiffener

(e) M&L for providing new 75mm thick cushion with tapestry cloth fixed with 12mm thick ply of appropriate size of 32 density cool foam complete with dismantling old one as per sample of tapestry held with this office complete all as specified and as directed. Note:- Cost of tapestry cloth shall not be less than Rs 350/-per meter.

(f) M&L for new tapestry cloth cover for cushion of approved shade & quality as per sample held with office to cover the foam of appropriate size and dismantling old one. Cost of tapestry cloth shall not be less than Rs 350/- per meter.

(g) Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed.

Bed plywood top FD-245 & 246 S&F new components of plywood top comprising outer member made of shisham wood and internal frame made of cheer wood, covered both sides of board with 3.5 mm thick one side teakwood finish plywood with 12mm thick half cut teak wood beading including dismantling of old unservicable one complete all as specified and as directed. (a) Head board

(b) Foot board

(c) S&F new components of bed plywood top made of Ist class HW (shisham) including dismantling of old unservicable one complete all as specified and as directed. (i) Long rail of size (90 x 35) mm

(ii) Stiffner of size (60 x 40) mm

(iii) Wooden bracket

(d) S&F top made of 12mm BWR phenol bonded commercial plywood with suitable screws including dismantling unservicable one all as specified and as directed.

(e) Preparation of the surfaces by thoroughly rubbing with emery paper both surfaces of the head board, foot board including legs and long rails and polishing with French polish one or more coat to obtain a glossy finish complete all as specified and as directed.

Table dining for 08 persons FD-30(M)/ 273 & 239 S&F new components of Table Dining 08 persons made of Ist class HW (shisham) including dismantling of old unservicable one complete all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) S&F top 18mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading alround including dismantling of old unserviceable one complete all as specified and as directed.

(e) Preparation of surfaces with sand/emery paper and applying French polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table dining for 06 persons FD-30(M)/ 273 & 239 S&F new components of Table Dining 06 persons made of Ist class HW (shisham) including dismantling of old unservicable one complete all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) S&F top 18mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading alround including dismantling of old unserviceable one complete all as specified and as directed.

(e) Preparation of surfaces with sand/emery paper and applying French polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Teapoy FD-382/ 232 & 278 S&F new components of Teapoy made of Ist class HW (shisham) including dismantling of old unservicable one complete all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) S&F top 18mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading alround including dismantling of old unserviceable one complete all as specified and as directed.

(e) Preparation of surfaces with sand/emery paper and applying French polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table centre FD-274 & 235 S&F new components of Table Centre made of Ist class HW (shisham) including dismantling of old unservicable one complete all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) S&F top 18mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading alround including dismantling of old unserviceable one complete all as specified and as directed.

(e) Preparation of surfaces with sand/emery paper and applying French polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table Peg FD- 277 & 236/384 S&F new components of Table Peg made of Ist class HW (shisham) including dismantling of old unservicable one complete all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) S&F top 18mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading alround including dismantling of old unserviceable one complete all as specified and as directed.

(e) Preparation of surfaces with sand/emery paper and applying French polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table (900 x 600)mm with / without drawer FD- 233 & 224 S&F of new components of Table (900 x 600)mm made of Ist class HW (shisham) including dismantling of old unservicable one complete all as specified and as directed. (a) Leg

(b) Top rail (long/front)

(c) Top rail (short/side)

(d) S&F top 18mm thick pre-laminated particle board one side laminated alongwith 4mm thick teak wood beading alround including dismantling of old unserviceable one complete all as specified and as directed.

(e) Drawer made out of 12 mm thick commercial plywood and front side made of 18mm thick prelaminated particle board one side laminated finish including provision of knob complete all as specified and as directed. Note :- Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality

(f) M&L for preparation of surfaces with sand/emery paper and applying French polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Sofa Set (TP) S&F of new following components of Sofa Set made of as per existing unserviceable including dismantling of old unservicable one complete all as specified and as directed. (a) Leg

(b) Leatherite

(c) Foam cushion of size (940 x 940)mm x 50mm for single seater

(d) Foam cushion of size (1950 x 940)mm x 50mm for three seater

Side board FD-372 (a) S & F door shutters (both) made of 18mm thick Pre-laminated particle board exterior grade duly providing 6mm thick teak wood beading alround with fittings and fixtures as per existing including dismantling unserviceable one complete all as specified and as directed. Note :- (i) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (ii) Hinges shall be 50 mm of approved quality.

(b) Front portion of the drawer as to match with the existing made out of 18mm thick Pre-laminated particle board with laminated finish with and including knob including dismantling unserviceable one complete all as specified and as directed.

(c) S&F top made out of 18mm thick Pre-laminated particle board with laminated finish duly providing 4mm thick teak wood beading alround including dismantling unserviceable one complete all as specified and as directed.

(d) S&F 3.4mm thick one side teak face plywood on sides including dismantling unserviceable one complete all as specified and as directed.

(e) Back made out of 6mm thick commercial plywood including dismantling unserviceable one complete all as specified and as directed.

(f) Preparation of surfaces with sand/emery paper and applying French polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table writing FD-249 & 275 (a) Top made out of 18 mm thick pre-laminated particle board one side laminated finish duly providing 4 mm thick teak wood beading alround including dismantling unserviceable one complete all as specified and as directed.

(b) S&F of following new components of table writing made of Ist class HW (shisham) including dismantling of old unservicable one complete all as specified and as directed. (i) Leg

(ii) Leg (short)

(iii) Side/bottom rail

(c) Back made out of 6 mm thick plywood commercial including dismantling unserviceable one complete all as specified and as directed.

(d) Side made out of 18 mm thick Pre-laminated particle board one side laminated finish including dismantling unserviceable one complete all as specified and as directed.

(e) Stiffner (long)

(f) Drawer made out of 18 mm thick particle board one side laminated finish including provision of knob including dismantling unserviceable one complete all as specified and as directed. Note :- Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality

(g) Complete cupboard including drawer from the table writing and made of 18 mm thick pre-laminated particle board including back provided with 6mm thick commercial plywood including dismantling unserviceable one complete all as specified and as directed. Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (b) Hinges shall be 50 mm of approved quality.

(h) Preparation of surfaces with sand/emery paper and applying French polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table Dressing Gents with mirror FD-230 (a) S&F new Looking mirror with frame of 5mm thick of appropriate size with framewith and including 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable one complete all as specified and as directed.

(b) S&F drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling unserviceable one complete all as specified and as directed.

(c) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table Dressing Ladies with mirror FD-251 (a) Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror complete including dismantling unserviceable one all as specified and as directed.

(b) Drawer made of 12mm thick commercial plywood and front side made of 18mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling unserviceable one all as specified and as directed.

(c) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Hat Stand (FD-361/362) (a) S & F 4mm thick teak face Ply to make front side along with teak wood edging of size 35mm x6 mm including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.

(b) S & F of back commercial plywood including dismantling unserviceable one complete all as specified, directed and shown on drawings.

(c) S & F of brass Pegs of size 75mm(W) x 120mm (H) including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.

(d) S & F of 5mm looking mirror with edging including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.

(e) M & L for preparation of surfaces with sand / emery paper and applying French polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bees wax complete all as specified and as directed.

Table bed side FD-276 (a) S & F of Top of 18mm thick pre-laminated particle board one side laminated finish duly providing 4mm thick teakwood edging including dismantling unserviceable one complete all as specified and as directed and shown on drawings.

(b) S&F of side made of 18mm thick pre-laminated particle board including dismantling unserviceable one complete all as specified, directed and shown on drawings.

(c) S&F of back made of ply of 6mm plywood commercial type including dismantling unserviceable one complete all as specified, directed and shown on drawings.

(d) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coat of approved quality complete all as specified and as directed.

Kushwaha Enterprises

M/s M K Enterprises