ARC work of Attend the cable fault at site within 03 HRS from receiving the message from D.E OF concern S/DN AND Locating the Fault underground Cable for ALL scheme in the jurisdiction of Mota Borasara S/dn & any others sdn of KIM Division. Through outsourced agency for existing DGVCL Network for SDN under Kim Division.

ARC work of Attend the cable fault at site within 03 HRS from receiving the message from D.E OF concern S/DN

AND Locating the Fault underground Cable for ALL scheme in the jurisdiction of Mota Borasara S/dn any

others of KIM Division.

Item Code No. Description Unit Rate Amount

Labour charge for excavation of cable trench of 400mm width x Meter

1200mm depth, in any type of soil for laying of cable of size up to

1 9925000001 mm2 (For additional cable 200 mm additional width shall be considered

i.e. half trench length is to be considered

Labour charge for excavation of cable trench of 600mm width x Meter

1200mm depth, in any type of soil for laying of cable of size up to

2 9925000002 mm2 (For additional cable 200 mm additional width shall be considered

i.e. half trench length is to be considered

Labour charge for excavation of cable trench of 400mm width x Meter

1500mm depth, in any type of soil for laying of cable of size up to

3 9925000003 mm2 (For additional cable 200 mm additional width shall be considered

i.e. half trench leng th is to be considered

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to 240 Meter

mm2 & preparation of sand layer 100mm thick, in the cable trench &

covering the cable with 150 mm dia (Outer), thickness 25 mm,

meter long RCC half round muffs and providing and fixing of 4inch

4 9925000004 width yellow colour polyethylene tape with printing"CAUTION

ELECTRIC CABLE BELOW' at 0.75 m depth from ground surface after

laying cable in trench. This will provide indication that electric cable is

passing underground so as to protect cable from mechanical injuries,

refilling the same, as per Instruction of E gineer in Charge (EIC) .

Labour charge for horizontal drilling using Auger machine without Meter

damage to surface road at max 2.0 mtrs depth & putting of

kg/cm2 , class-4,Green color, 110mm 0.D. 8.5mm thickness H.D.P.E.

pipe confirms to IS 4984-1987(3rd revision) and BIS certification and

laying of 11KV/22KV XLPE cable of size up to 240 mm2 in HDPE pipe,

5 9925000005 as per Site Condition (excluding cost of pipe). The detail map obtained

from HDD machine and excel sheet hard and soft copy) indicating the

respective depth and distance from adjacent landmark for each

segment for HDD is must require to be submitted. HDD to be carried

out at depth 1.5 mtrs to 2.0 mtrs as per site conditions and as er

instruction of EIC.

File No: DGVCLDOKI/TND/e-file/6817/2026/3420/Technical

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0071/07/2026 Approved Date: 03-07-2026 01:57

Labour charge for horizontal drilling manually without damage to Meter

surface road at max 2.0 mtrs depth & putting of 6.11 kg/cm2 , class-

4,Green color, 110mm O.D. , 8.5mm thickness H.D.P.E. pipe confirms

to IS 4984-1987(3rd revision) and BIS certification and laying of

11KV/22KV XLPE cable of size up to 240 mm2 size, as per Site

Condition (excluding cost of pipe). The detail map and excel sheet

(hard and soft copy) indicating the respective depth and distance from

adjacent landmark for each segment of cable to be submitted. Drilling

to be carried out at depth Minimum 1.2 mtrs to 2.0 mtrs as per site

conditions as per instruction of EIC.

Supply of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5 mm Meter

7 9925000007 thickness H.D.P.E. pipe confirms to IS 4984 and BIS certification for

laying of underground 11KV/ 22KV XLPE cable up to 240 mm 2 size.

Labour work for RCC concreting on disputed location and repairing of CMT

8 9925000008 damage portion of road crossing for the work carried out for roads

crossing as well as concreting & muffing of poles including all materials

Providing & fixing concrete stone route marker of 300 mm width x 150 No

mm thick x 650 mm height embedded in earth at least 300 mm below &

350 mm above ground level respectively at distance approx. 50 meters

along the length of cable. The RCC concreting (1:2:4)(all necessary

materials will be in bidder's scope) of route marker is to be carried out

300 mm width x 150 mm thick x 300 mm below ground level as per

instruction of EIC. The route marker should be with name of company

with approved yellow colour-DGVCL. The distance from marker to

cable and cable depth with feeder name etc., marked with arrow sign is

to be painted on it. The route marker is to be fixed at location near to

any fixed permanent location (not necessary to fix exact on top of

cable) as per instruction of EIC.

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up to perJob

240 mm 2 on DP Structure with fixing of 02 Nos polymer cleats on top

and middle part. Polymer cleats, nut bolts etc. fixing material to be

provided by contractor.

Providing & fixing of 6.11kg/cm2 , class4,Green color, 110mm O.D. perJob

8.5mm thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification on the erected DP structure for the mechanical protection

of cable by inserting the cable inside HDPE pipe. The HDPE pipe shall

be erected in such a way that 300mm shall be below the ground level

and the rest 2700 mm shall be supported on the DP Structure with

No Polymer cleat. All materials including polymer cleat and Nut bolt to

be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI No

pipe with pit to be filled with salt & coke and construction of chamber as

12 9925000016 per DGVCL Drg. No. dg /100 for DP and cable. The earthing pit should

be joined with cable by G.I. strip of size 1" width & 2 mm thick. All

material GI pipe, Coke Salt etc will be supplied by bidder.

Supply & fixing of heat shrink type end terminations (outdoor) for up to No

13 9925000017 11kV 3C x 185 mm2 size XLPE cable as per DGVCL technical s

Supply & fixing of heat & shrinkable end terminations (outdoor) for up No

14 9925000018 to 22 kV 3C x 185 mm 2 size XLPE cable ( as per DGVCL technical

Supply & fixing of heat shrinkable type end terminations (indoor) for up No

15 9925000019 to 11kV 3C x 185 mm 2 size XLPE cable as per DGVCL technical

Supply & fixing of heat & shrinkable end terminations (indoor) for up to No

16 9925000020 22 kV 3C x 185 mm 2 size XLPE cable as per DGVCL technical

Supply & fixing of heat shrinkable straight through joint for up to 11kV No

17 9925000021 3C x 185 mm 2 size XLPE cables as per DGVCL technical

File No: DGVCLDOKI/TND/e-file/6817/2026/3420/Technical

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0071/07/2026 Approved Date: 03-07-2026 01:57

Supply & fixing of heat shrinkable straight through joint type for up to No

18 9925000022 22kV 3C x 185 mm 2 size XLPE cable as per DGVCL technical

Labour charge for excavation of 2100mm long x 1200mm wide x 1200 No

mm deep joint pits for installation of 11kV / 22kV Straight through joints

19 9925000023 as per instruction of engineer-in-charge & covering the cable with

mm dia (Outer), thickness 25 mm, 1.0 meter long RCC half round

muffs & refilling same as per instruction of EIC .

Providing and fixing of insulating bus bar, made from 11KV/22KV No

XLPE cable after removal of semi conducting layer and applying of

PVC heat shrinkable antitracking core insulating tubing (1.1KV), on

both end terminal using Aluminium long barrel heavy duty up to 240 sq

20 9925000024 mm lugs, Aluminium bus connector. Taping with PGclamp for bus

conductor as per drawing and as per instruction of EIC. The

Allurninium lugs and PG clamp shall be covered with 11KV/22KV HT

insulating tapes.(11KV/22KV XLPE cable will be in scope of DGVCL

while all other materials will be in bidder's scope.

Testing of cable at various points and commissioning the feeder as per No

21 9925000025 instruction of engineer-in-charge.Test result shall be submitted by

contractor with bill.

Preparation and submission of 6 (six) copies, of complete layout Set

22 9925000026 drawings with GIS mapping as per actual cable routing showing road

crossing, HDPE pipe sleeving, jointing locations, markers etc.

To Attend the cable fault at site within 03 hrs from receiving the No

23 message from D.E of concern S/dn and locating the fault under ground

TOTAL AMOUNT :-Twenty Four Lacs Only 24,00,000/-

TOTAL AMOUNT :-Twenty Four Lacs Only 24,00,000/-

Executive Engineer (O&M)

DGVCL, KIM IND DIVISION.

File No: DGVCLDOKI/TND/e-file/6817/2026/3420/Technical

Approved By: Executive Engineer,Technical,DGVCLDOKI