ADDN ALTN EXTERNAL PAINT SCHEME OF CERTAIN SINGLE LIVING SAILORS ACCN AT INS VALSURA JAMNAGAR

Amount

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of entire debris as ordered outside MD land complete all as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to faciliated demolition) and removal of entire debris as ordered outside MD land complete all as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation of drain, man hole, stay etc. not exe. 10 Sq. m on plan and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and depth exceeding 1.5 m upto 3.0 m or part thereof for foundation of drain, man hole, etc. not exceeding 10 Sq. m on plan and getting out in hard/ dense soil complete all as specified and directed.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soil complete all as specified and directed.

Removing excavated surplus soil to a distance exceeding 250 mts but not exceeding 500 mts and depositing where directed .at a level not exceeding 1.5 M above the starting point complete all as directed.

M & L for PCC 1:4:8, type D2 (using 40 mm crushed stone aggregate) as in foundation filling mass concrete complete all as specified and directed

M&L for PCC 1:3:6, type C2 (using 40 mm crushed stone aggregate) as in concrete bed to drain pipes including packing under and haunching/ surrounding including formwork against the sides of pipes after they are laid and tested for pipes complete all as specified and directed.

M&L pre cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified.

M&L for plain cement concrete 1:2:4 type B1 using 20 mm graded granite stone aggregate as in cast in situ in cills and other similar bands, plinth courses, parapets, coping, bed plates, water throughts and the like including necessary form work, weathering slightly rounded, chamfered angles and throating complete all as specified and directed.

M&L for Precast Reinforced cement concrete 1:2:4, type B1 (using 20 mm crushed stone aggregate) as in landing, cover slab (for manholes etc.), water throughs and similar articacles with plain faces, set and jointed in cement mortar 1:4 complete all as directed.

M&L for RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in chajja , roof projection etc in any description up to 10 Mts in height in paches including necessary form work complete all as directed. (Note : Qutoed rate is deemed to be inclusive of form work, scaffolding, safety belt etc ).

Supply only Integral Water Proofing Compound (ISI Marked) of Make: CICO, Acco Proof, Impermo, Aqua flex as approved.

M&L for Extra for forming fair finishing drain or channel upto 60cm inner girth in cement concrete, using extra cement, including forms, moulds, mitered/ stopped ends etc complete all as specified and as directed.

S&F GI chicken wire mesh cut to size made to shape as ordered including fixed to walls for receiving a plaster. (Note: Weight of GI chicken wire mesh shall be 140 to 180 grams /Sqm)

M&L framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as directed.

S & F 10 mm dia and over TMT bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C2 (using 40 mm graded crushed granite stone aggregate) as in sub base, floors, pavings etc. finished fair and even complete all as specified.

M&L Machine pressed coloured chequered cement concrete tiles (PVC moulded) of size 300x300x25 mm thick (confirming to IS: 13801-1993) machine pressed with grey cement and pigments, set and jointed in neat cement slurry in floors and pointed with coloured cement to match the shade and laying on 15 mm thick screed bed in CM 1:6 complete all as specified.(Note: i) Quoted rate is deemed to be inclusive of cement screed. ii) Colour of tiles shall be got appproved before incorporation in the work)

M&L M-35 grade, 60 mm thick machine pressed, PVC moulded precast cement concrete interlocking paver blocks any shape and size with grey cement and pigment confirming to IS: 15658-2006 , laid over and including 50 mm thick compacted sand cushion complete complete all as specified and as directed.

M&L for Rendering 20 mm thick in cement mortar 1:4 on brick or concrete surface mixed with WPC @ the weight of minimum 2% by weight of cement mixed or as per manufacturer instruction, and finished the surface even and smooth without using extra cement complete all as specified and directed. Note: WPC measured and paid separately.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work/ block masonary or concrete surfaces finished even and smooth without using extra cement complete all as specified.

M&L for rendering 10 mm thick in CM 1:3 on ceiling surfaces of roof projection/ chajjas working height upto 10 mtr finished even and smooth without using extra cement complete all as specified and as directed. (Note: Qouted is demmed to be inclusive of scaffording, safety belt etc.

Three coats of white wash on newly plastered surface of ceiling after necessary preparation of surface complete all as directed.

M&L for preparation of old surfaces of walls and applying two coats of oil bound distemper over a coat of 1 mm thick white cement based wall care putty complete all as specified.

M&L for preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of 1 mm thick white cement based wall care putty complete all as specified.

M&L for complete removal of existing treatment and preparing old plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1 mm thick white cement based wall care putty complete all as specified.

M&L for preparing newly plastered surface of walls and applying two coats of acrylic emulsion paint having alkalie and anti fungal resistance, dirt resistance exterior paint of required shade with silicon aditives over and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm as per manufacture's instructions complete all as directed. .

Complete removal of any type of existing treatment by mechanical means (any no of layers), Washing, rubbing down and stopping of distempered and painted surfaces of wall surfaces and applying two coats of acrylic emulsion paint having alkalie and anti fungal resistance, dirt resistance exterior paint of required shade with silicon aditives over and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm as per manufacture's instructions complete all as directed. .

M&L for two coats of smart care damp proof paint over and including self-priming coat on existing plastred surface including necessary preparation of surface complete as per manufacturer instructions and as directed. Make: Asian Paint Smart Care Damp Proof or equivalent make approved by GE)

M&L for two coats of 1st quality synthetic enamel paint over any description of old painted wood and wood based surface of any description over 10 cm in width or girth including necessary preparation of old wooden surface complete all as directed.

M&L for two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation of new steel surface complete all as directed.

M&L for two coats of 1st quality synthetic enemal paint over any description of old painted steel surface over 10 cm in width or girth including necessary preparation of old steel surface complete all as directed.

M&L for writing letters/ numbers of size 8 to 10 cm high over synthetic enamel paint circle of 30 cm dia for describing building numbers as ordered complete all as directed by Engr-in-Charge.

M&L for writing letters/ numbers of size 8 to 10 cm high over synthetic enamel paint rectangular marking of size 600 mm x 300 mm for describing periodical services done/ due details in mm/yyyy format as ordered complete all as directed by Engr-in-Charge.

M&L for preparation of old plastered surface of any description and applying Zycosil plus penetrative solution one or more coat as ordered applied as per manufacturer's instructions complete all as directed. Make : Zycosil plus or equivalent make as approved .

S&F 50 mm dia PVC pipes for weep holes at area drain complete all as directed.

M&L for Reinforced concrete pipe 200mm bore Class NP2 (ISI Marked) alongwith collar laid to slope in trenches over PCC bed & jointed in cement mortar 1:3 and tested on completion complete all as specified and directed.

All as per item No. 38 here-in-above but 300mm bore -do-

All as per item No. 38 here-in-above but 450mm bore -do-

M&L for Soling (or sub base) 150 mm spread thickness with broken boulders or quarried stones interstices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

Supply and laying of instant ready mix premixed bituminous material for repairing depression on pot holes. Material consisting of granular material 5-20 mm crushed stone aggregate with 5.5% of bitument in 25 kgs bag. Make: Shali patch of STP or equivalent as approved by GE.

Road cutting upto 1000mm wide and upto 600mm deep for sewage line crossing and removal of cutting materials as directed by Engineer-in-charge complete.

M&L for patch work by application of high build polymer modified cement mortar (1:3) mixed with 6 ltrs SBR per bag of cement as in small patch work of wall/ ceiling surfaces 8 to 30mm thick in two layers surfaces over a coat of bonding agent Nito Bond SBR coat (1 Ltr SBR + 1 Ltr water + 3 kg cement) applied as per manufacturers instructions. Note:- SBR latex chemical will measured and paid separately.

Supply only SBR latex chemical of Make FOSROC or equivalent.

S t modi