SPL REPAIR TO BLDG NO T-8/10 TRADE OWNED KERBSIDE (TOK) LABORATORY STORE AND OFFICES OF 23(I) R AND O FLT

Amount

Dismantling of Asbestoes cement (corrugated, semicorrugated, etc) sheets any gauge, thickness in roof coverings complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screwscomplete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone masonry/stone slabs built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc10 sqm on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified and directed.

Returing, filling in any type of soil including spreading, levelling, watering and well ramming in layers not exc 25 cm thick, in any type of soil complete all as specified and directed.

Removing excavated material ( surplus soil) to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specifed and directed.

M&L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.

M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed

Taking down cement plaster, in any thickness from brick or stone walls,/facia of roof Chajjas,roof projection,ceiling etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside of A 1 defence land complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete walls internal surfaces in CM 1:6 finished to even & fair without using extra cement.Complete all as specified and directed by Engineer in Charge .

M&L 15mm thick rendering cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surface of internal wall to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of oil bound distemper over a coat of 1mm thick wall putty on plastered surface using roller all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.

M&L applying 2 coats of exterior acrylic emulsion paint on walls of required shade applied @ 1.67 ltr/ 10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 Sqm on new plaster/ old surface including cornices, plasters etc all as specified and directed.

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) and including removing unserviceable material,outside of A 1 defence land complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub bases of floor complete all as specified and directed.

M&L cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) 75 mm thick as in plinth protection/hard standing surface finished even and smooth without using extra cement complete all as specified and directed by Engineer in Charge .

M & L Cement concrete, (1:3:6) type C2 (using 40mm graded crushed stone aggregate for surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel any inner girth in cement concrete, using extra cement, including forms, mould, mitred/stopped ends etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile n. exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:6.

M&L for PCC 1:2:4 type B2, using 20 mm graded stone aggregate as in foundations, filling and mass concrete..

Material and labour for joint free glazed coloured ceramic tiles in vertical surfaces for wall tiles of size 600 x 300 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with over & including 10mm thick cement plaster finished fain and even in cm 1:4.

Dismantling wall and ceiling boards including cover fillets of any descrition complete all as specified and directed.

M&L for false ceiling with semi perforated 12mm thick micro triangular edged at all heights with GRG (glass fiber reinforced gypsum) false ceiling tiles of size 595x595 of approved texture design and pattern having moisture content less than 2%, humidity resistance of 99%, NCR 0.50 to 0.75 as per IS 8225, 1987, non combustible as per BS 475 (Part-IV 1970 and light code description unit rate No 429 sub head 26.0 new technologies and material) reflectance of 85% minimum to laid in true horizontal level suspended on interlocking metal 'T' grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120gms per Sqm) including both side comprising of main 'T' runner of size 15x32mm of length of 3000 mm, cross 'T' of size 15x32mm of length 1200mm and secondary intermediate cross 'T' of size 15x32mm of length of 600mm to form grid module of size 600x600mm suspended from ceiling using galvanised metal sheet item (galvanised @ 80gms per Sqm) i.e. 50mm long 8mm outer diameter M-6, fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjusters of size 85x25mm galvanised iron perimeter wall angle of size 24x24x0.4mm of length 3000mm to be fixed on perimeter of wall/partition with the help of plastic rawal plugs at 450mm center to center and 40mm long dry wall screw. The work shall be carried out as per specification and as directed by Engr-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed.

All as item No.28 above but exc 1.50 Sqm and n.exc 4.00 Sqm each.

M&L Solid (125mm x63 mm Double Rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg/ Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by Engg-in-Charge. The door frame should be Water Proof, termite proof, fire retardant and having excellent screw holding capacity and shall be fixed with 6 Nos 150mm long hole fasterners complete all as specified and directed.

M&L Solid (100mm x63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg/ Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by Engg-in-Charge. The door frame should be Water Proof, termite proof, fire retardant and having excellent screw holding capacity nd shall be fixed with 6 Nos 150mm long hole fasternerscomplete all as specified and directed.

M&L 30mm thick moulded plain WPC solid door shutter: providing (30mm thick) MOLDED WPC Brown Factory made 100% solid door (Conforming As per IS: 4020) made from 100% LEAD FREE single extruded with 2,4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/Cum. Manufactured by an ISO: 9001-2015 certified company. The door should be water Water Proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed.

Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes complete all as specified and directed.

Taking down steel tubing and connections 20 mm dia

All as per item No.35 above but 25 mm dia

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

S&F CPVC 25mm outer dia gate valve complete all as specified.

Dismantling old paver block

M&L polished rubber moulded coloured machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming IS 15658-2006 of 60mm thickness, M-35 grade laid over and incl 25mm thick sand cushioning including demolition/ removal of unseriviceble paver block complete all as specified and directed.

M&L PCC 1:4:8 type C -2 using 40 mm graded aggregate 100 mm thick as in sub base, floor & pavings, all as specified

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; framed angle for chain link fixing, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and as directed.

S/F 100 mm long mild steel butt hinges medium weight complete all as specified and directed.

S&F aluminum anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed.

S&F aluminum anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F aluminum bow handle "D" type anodized 150mm long complete all as specified and directed.

S&F for Stainless steel curtain rod, 25mm dia with fixing brackets and decorative type knobs both side of each rod ,incl taking down old curtain rod or pelmet boxes complete all as specified and directed by Engineer in Charge .

Dismantling timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed.

M&L second class hard wood as in scantling clean sawn complete all as specified and directed.

S & F Rolled Mild Steel ( confirming to Fe 410 - W Gde-E-250 Quality-A) as in roof trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle, channel or flat sections) including distance peices cleats etc. complete all as specified and directed by Engineer in Charge .

M&L for preparation of new steel surfaces of any description over 10cm width & girth not otherwise described and applying two coat of synthetic enamel paint (Ist quality)over a coat of red oxid primer. Complete all as specified and directed

M&L Granite (of any type) work 20 mm thick (table rubbed and polished)in steps, jambs, pillars, windowcills, cooking platforms and like inover & including 15 mm thick cement mortar (1:4) pointing in white cement (1:2) using marble dust with admixture of pigment to match.

S & F in repair for vitreous china semi pedestal pattern (Anglo -Inidan Type) white or colour (excluding fixing bolts, flushing cistern and flush pipe including connection to trap and to flushing pipe anti syphonage pipe etc complete including making good to floor.

Supply only plastic water closet seat ,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised highing device.

Supply and fixing in repair vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush etc)

S & F in repair for Vitreous china wash basin angle back (Oval type) size 600 x 480 mm white excluding taps waste chain and plug and porcelain stopper including cutting for and pinning in ends of brakets or eracting stand , waste pipe

S & F in repair for pillar taps 15 mm , cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed.

Supply and fix in repair PVC valveless, symphonic action type, flushing cistern low level, white with inlet ball valve float and valve float and handle including brackets 10 ltrs capacity .

Supply and fix in repair flush pipe of polyethylene of high density of PVC 32 mm for low level cistern, in repair.

Supply and fix in repair vitreous china urinals, size 635 x 395 x 420mm, white, half stall long body type, complete.

S&F in repair Vitreous china urinal partion white 310X700mm complete.

Supply and fix in repair PVC connection 15 mm size with PTMT nuts of length 600 mm in repair

Supply and fix in repair for push tap any colour high pressure of PTMT screwed for iron pipe and fixed suitable for urinals (Minimum weight 15 mm - 50 gms) 15 mm dia in repair.

Supply and fix in repair for urinal spreader of chromium plated fiting with 15 mm dia pipe.in repair

Supply and fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete.

Supply and fixing in repair in position CP recessed type toilet paper roll holder of size 150 x 150mm with necessary CP screws and washers fixed to wall fixed in repair.

Supply and fixed in repair angle cock, fancy type, chromium plated with long shank and cup 15 mm dia, without flange .

Taking down UPVC (SWR) pipes any dia.

Supply and fix 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

Supply and fix 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

Supply and fix PVC (SWR) bends any radius 75 mm dia of bore.

Supply and fix PVC (SWR) bends any radius 110 mm dia of bore.

Supply and fix in repairs PVC (SWR) gully trap 125/110mm, setting and jointing with solvant cement.

Supply and fix in repairs PVC (SWR) floor trap 75 mm dia out let with grating plain including jointing with solvant cement.

S&F in repairs Anodised aluminium powder coated frame for doors window,partition and ventilatore with one or more rebates including joining cleat forfixing etc complete all as specified

S&F in repairs Anodised aluminium powder coated door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified

S&F in repairs Anodised aluminium powder coated window and ventilators shutters sliding or fix type, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,including provision of lock in each door, rollers, anodised aluminum snap beading screws etc. complete all as specified

S & F sheet glass 5.5 mm thick ordinary quality frosted on one side in n. exc 1.5 Sqm in each pan with rubber beading as in doors and partion.

S&F Prelaminated particle board 12 mm thick, exterior grade,prelaminated both side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work as in aluminium door and partion.

S & F sheet glass thick ordinary quality in n exc 0.75 Sqm in each pan 4 mm thick with rubber beading as in window.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L RCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in beams and roof including balconies, canopies, deck slabs or in Chajja/facia projection and the like complete all as specified and directed

M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed

S&F in repairs PVC water storage tank cylindrical,triple layer vertical with closed top with threaded cover hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet and 20mm tank nipple (min weight 45gm) suitable for HDPE water tank including dismantle of old water tank and removing from site. complete all as specified and directed.

Disconnecting the electrification and taking down DBs (any type of SPN DBs) and making good to the disturbed surfaces to match the existing surface all as specified and as directed by EIC. Note - Temporary power supply shall be provided by contractor.

Taking down U/S submain wiring aluminium etc and making good the disturbed surfaces of walls/ floor etc matching with the existing surface.

M&L for sub-main wiring (concealed) with two single core 6 sq mm FRLSH PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of massinory including 25 mm dia non-metallic PVC conduit fixed in wall as surface/ concealed including 6 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, all as specified and as directed by EIC.

M&L for sub-main wiring (concealed) with two single core 4 sq mm FRLSH PVC insulated unsheathed stranded copper conductor cable drawn through including chasing cutting in any type of massinory including 20 mm dia non-metallic PVC conduit fixed in wall as surface/ concealed including 4 sq mm copper earth continuity wire, accessories and connecting to earth dolly complete, all as specified and as directed by EIC.

Taking down carefully aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pedants, regulators, sockets, light fitting etc.. and making good the disturbed surfaces of walls/ floor etc matching with the existing surface all as specified and as directed by EIC.

Material & Labour for following type Point Wiring controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with contineous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealed PVC conduit MMS ,duly concealed to wall/floor or above false ceiling with fittings(ISI marked) not less than 20 mm dia (Color coding of wires shall be Phase, neutral and earth wire all as specified ) sunk Metal flush box with and incl decorative polycarbonate frame for housing Modular Switches, sockets , fan regulators etc including white cover cover plate complete all as specified and directed. Note:- i) Cost of cutting chases of suitable girth where required on brick /concrete surface and making good disturbed surface shall be deemed to be included in quoted rates).

One light point controlled by one switch.

One ceiling fan point controlled by one switch.

One exhaust fan pointcontrolled by one switch.

One 3 pin socket outlet 5 Amps on the same board.

One 3 pin socket out let 5 Amps on the independent board.

All as per Item No. 93 above but 2.5 Sq mm multi stranded copper conductor with 2.5 Sq mm copper earth continuity wire connected to earth duly complete for one 15A Socket on Independent board all as specified and as directed by EIC.

Supply and fixing surface & wall mounted LED batten 4 feet with 1x20 Watt indoor box type poly carbonate decorative luminaries ,PF O.9 and above operating voltage 140V-270V,Colour temp 6500K & lumen input output 95 Lumen per watt and including electronic driver and 1x20 watt LED Lamp,, pre-wired including necessary electric connection with copper flexible PVC cable of 0.50 Sq mm 3 core not more than 1 mtr in length from ceiling rose/connector to light fitting,

S & F angle lamp holder, PVC Polycab type with back plate suitable for batten fittings complete including fixing of 9/10 watt LED bulb all as specified.

Supply and fixing step socket type modular fan regulator 120/280 V , 100Watt all as specified and as directed.

Supply and fixing modular socket, 6A -2/3 pin combined 2 module ISI marked 230 volts, 50 Hz all as specified and directed by Engr- in-charge.

S & F Switch Modular single pole, one way 6 Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge.

Supply and fixing modular socket, 6A/16A -2/3 pin combined 2 module 230 volts 50 hz all as specified and directed by Engr- in-charge.

Supply and fixing switch modular , one-way 16Amps, 1 module 240 Volts AC all as specified and directed by Engr- in-charge.

M & L for ceiling rose, surface bakelite, 65 x 50 mm, three terminals all as specified and as directed.

S & F sheet metal enclosures for SPN DB's with double glazed door for incorporating MCBs,IP-43 , 8 way with 100 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.

S & F MCBs SPN 32 amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

S & F MCB SP, 6 to 32 Amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

S & F MCBs SP 40 amps, 240 volts, 50 Hz, 'C' curve including necessary incoming and out going electric connection with suitable size of copper lugs all as specified and as directed by Engr-in-Charge.

S&F DB Power unit MCB protected socket with sheet steel enclosure 20 Amp combo incl 16 amp plug top indicator type for A/C or Geyser

M & L for Earthing complete with galvanised steel plate electrode, 600 x 600 x 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to galvanised earthing lead of 4 mm dia of iron or steel wire all as shown in electrical plate No. 5 all as specified and as directed. Note :- the cost of excavation and earth work PCC pit and CI cover funnel & watering pipe, wiremesh, charcoal dust and common salt shall be deemed included in the unit rate for earthing all as specified and as directed by EIC.

Supply, fabricated and and fixing of street light bracket made out of GI pipe 1.0 Mtr long, 32 mm dia medium grade bent to shape as directed including clamps made out of 40 mm x 6 mm flat for fixing bracket suitable for steel tubular poles including nuts and bolts, washers and other connected items of required size including painting with one coat of aluminium paint over a coat of red oxide/primer all as specified and as directed.

M & L for LED Bldg Security light Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

M & L for disconnecting electric supply, taking down old unser fan, cealing cable ends, dismantling blades carefully after unscrewing nuts and bolts of ceiling fan any size from existing position and bringing to AGE E/M store yard

S& F Ceiling fan complete with copper winding ,blades ,down rodss,electronic regulastor and accessories 230 v0lt,1200mm sweep,min delivery 210 CFM wuth service value 6.00 BEE. Five star rated with BLDC

Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 volts, 50 Hz, 1200 RPM, copper winding of sweep 250 mm complete all as specified and directed.

M & L for 40mm bore GI pipe (med grade) laid or fixed with wall for hanging of ceiling fan of 1200 mm sweep including necessary PCC work and MS clamp 02 Nos on each span of not more than 10 meter horizontally suitable for ceiling fan complete all as specified and directed.

S& F MCCB,4 Pole ,16 KA,100 AMP,415 v

S & F vertical load line in sheet metal enclosures MCCB TPN DB's with double door for incorporating MCCB as incomer and MCBs SP/SPN as outgooing , IP-43 , TPN 4 way with 200 amps rated busbar, 440 volts, as per IS-8623 including taking out old UNSV DB and making good the disturbed surface of wall and match with the existing surface compelte all as specified and as directed. ( Note- MCCB 3 pole 63 amps as main incomer will be included in quoted rate)

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

MAHTAB ALAM (BID ID -3391469)

SWASTIKA BUILDERS (BID ID -3390453)

JBN CONSTRUCTION (BID ID -3390501)