Running contract for various urgent civil works including annual maintenance works of institute buildings (mainly academic buildings) in NITC (2025-26)

Running contract for various urgent civil works including annual maintenance works of institute buildings (mainly academic buildings) in NITC for a period of one year, scope of which is detailed in Annexure II of the Notice Inviting Tender. The quoted percentage will be applied on each individual items mentioned in the sheet 'Items' of this BoQ Excel file, while operating the contract.

Detailed Estimate

EARTH WORK

Earth work in surface excavation of all kinds of soil (not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge.

Earth work in excavation of all kinds of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.

Earth work in excavation of ordinary rock by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Banking excavated earth of all kinds of soil by mechanical/manual means in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and for all lift.

Filling quarry muck in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m :Details of cost for 10 cum.

Earth work in excavation of all kinds of soil by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Excavation work of ordinary rock by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Excavating trenches of required width in all kinds of soil for pipes, cables, etc. including excavation for sockets, and dressing of sides, by mechanical/manual means ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: Pipes, cables etc, not exceeding 80 mm dia.

Excavating trenches of required width in all kinds of soil for pipes, cables, etc. including excavation for sockets, and dressing of sides, by mechanical/manual means ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: Pipes, cables etc, not exceeding 80 mm dia. But not exceeding 300mm dia

Excavating trenches of required width in all kinds of soil for pipes, cables, etc. including excavation for sockets, and dressing of sides, by mechanical/manual means ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: Pipes, cables etc. exceeding 300 mm dia but not exceed ng 600 mm

Excavating trenches of required width in ordinary rock for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : Pipes, cables etc. not exceeding 80 mm dia

Excavating trenches of required width in ordinary rock for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia ,

Excavating trenches of required width in ordinary rock for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and for all lift

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20cm in foundation, trenches, plinth, sides of foundation, etc. complete for all lift.

ySupplying and filling in plinth with sand under floo

ding watering, ramming, consolidating and dressing complete.1*0¸Surface dressing of all kinds of soil in the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50m and lift up to 1.5m.10`
Excavating holes more than 0.10 cum & upto 0.5 cum in all kinds of soil including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5m.10üClearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.10mClearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.10
Felling trees having girth beyond 30 cm upto and including 60 cm girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.10;1F01.22mSupplying Chlorpyriphos emulsifiable concentrate of 20% in sealed containers including delivery as specified.101.23
Diluting and injecting Chlorpyriphos E.C. 20% chemical emulsion with 1% concentration for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/sqm on the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. completem1„0¯1Â01.24Å
Diluting and injecting Chlorpyriphos E.C. 20% chemical emulsion with 1% concentration for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) for treatment of existing masonry using Chlorpyriphos E.C. 20% chemical emulsion with 1% concentration @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the holen1„0½1Ð01.25óTreatment at points of contact of wood work by chemical emulsion Chlorpyriphos (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.1+0
Providing and laying in position cement concrete of grade 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), excluding the cost of centering and shuttering - All work up to plinth level.:1?0
1 Providing and laying cement concrete of grade 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing..130Í
1ä
0 Providing and laying cement concrete of grade 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing..130Î
1ä
0ŒCentering and shuttering including strutting, propping etc. and removal of formwork for Columns, piers, abutments, pillars, posts and struts4.3.3(
Providing and laying cement concrete 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.%1+0¼1È0
Providing and fixing at or near ground level precast cement concrete 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete.-1K0Û1é0Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.1N03.13C
Providing and fixing 18 mm thick ferrocement boards with cement mortar 1:3 with coarse sand and reinforced welded mesh(20 Gauge) , chicken mesh (10Kg) in required thickness for bedroom, kitchen cupboards including cost and conveyance of all materials, labour charges, etc., complete, as per direction of Engineer-in-charge. 130E
Providing and laying in position 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level!1(03
1Þ
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fllets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) grade of concreteÔ1ê06
1=
0Ö
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).Ú1ð0@
1G
0Centering and shuttering including strutting, propping etc. and removal of formwork for Foundations, footings, bases of columns, etc. for mass concrete5.9.1ÃCentering and shuttering including strutting, propping etc. and removal of formwork for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.5.9.2È
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).21H0I1k00
17
0ÈThermo-Mechanically Treated Steel reinforcement bars of grade Fe-500D or more for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.>1E0¶1Ç0ÉThermo-Mechanically Treated Steel reinforcement bars of grade Fe-500D or more for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.>1E0¶1È0
Thermo-Mechanically Treated Steel reinforcement bars of grade Fe-500D or more for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto plinth level.>1E0l1x0ô1
Thermo-Mechanically Treated Steel reinforcement bars of grade Fe-500D or more for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level.>1E0l1x0ô1[Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.1#04.17"Providing and laying in position ready mixed or site batched design mix cement concrete of M25 grade with minimum cement content of 330 kg /cum for reinforced cement concrete work for all works upto plinth level; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS:9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.!1,0[1^0Â1Ó04.18ûProviding and fixing in position factory made precast RCC M-40 door and window frame of size 100 mmx 60 mm, fixing with hold fast embedded in 1:3:6 concrete block, having excellent smooth finish as per IS: 6523 with reinforcement of 3 Nos, 6 mm dia main bars tied with 3 ram M.S stirrups placed @ 200 mm C/C and 6 numbers high strength polymer blocks of required size for fixing hinges including providing 6 no specially designed M.S. galvanised sleeves for accomodating 6 mm dia fully threaded bolts for fixing hold fast on vertical members, providing suitable arrangement for recieving sliding door bolts and tower bolt etc. all complete, as per the direction of Engineer-in-charge. The frame shall be measured in running metre correct to two places of decimal..1T0Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4(1 cement :4 coarse sand)6.1.1’Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)1 0M1b0×Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:4 (1 cement : 4 coarse sand)1 0|10¦Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4(1 cement :4 coarse sand)6.12.2ÃHalf brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4(1 cement :4 coarse sand)6.13.2Ž
Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry 100 mm / 125mm thick with Grade 1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.11=0F1Z0Ö1é0Ñ
Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry 150mm/230mm/300 mm thick AAC with Grade-1 blocks of density 551-650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).11>0F1^0Ö1é0êLaterite masonry for foundation and basement upto plinth level including all cost of materials, labour charges etc. with neatly dressed laterite stone of size 35x20x20cm or nearest size, in cement mortar 1:6 (1 cement : 6 coarse sand)10-1>05.105.11÷Laterite masonry with neatly dressed laterite stone of size 35x20x20cm or nearest size for superstructure above plinth level up to floor two level including all cost of materials, labour charges etc. in cement mortar 1:6 (1 cement : 6 coarse sand)10}1’05.12*
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For foundation, basement and plinth upto plinth level including all cost of materials, labour charges etc.using blocks of 200mm thickness, in cement mortar 1:6 (1 cement : 6 coarse sand)p1¥05.13*
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For foundation, basement and plinth upto plinth level including all cost of materials, labour charges etc.using blocks of 200mm thickness, in cement mortar 1:4 (1 cement : 4 coarse sand)p1¥05.14+
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For foundation, basement and plinth upto plinth level including all cost of materials, labour charges etc. using blocks of 150mm thickness, in cement mortar 1:6 (1 cement : 6 coarse sand)p1¥05.15+
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For foundation, basement and plinth upto plinth level including all cost of materials, labour charges etc. using blocks of 150mm thickness, in cement mortar 1:4 (1 cement : 4 coarse sand)o1¥05.16+
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For foundation, basement and plinth upto plinth level including all cost of materials, labour charges etc. using blocks of 100mm thickness, in cement mortar 1:6 (1 cement : 6 coarse sand)p1¥05.17+
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For foundation, basement and plinth upto plinth level including all cost of materials, labour charges etc. using blocks of 100mm thickness, in cement mortar 1:4 (1 cement : 4 coarse sand)p1¥05.183
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For superstructure above plinth level up to floor two level, including all cost of materials, labour charges etc. using blocks of 200mm thickness, in cement mortar 1:6 (1 cement : 6 coarse sand)p1«05.193
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For superstructure above plinth level up to floor two level, including all cost of materials, labour charges etc. using blocks of 200mm thickness, in cement mortar 1:4 (1 cement : 4 coarse sand)p1«05.203
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For superstructure above plinth level up to floor two level, including all cost of materials, labour charges etc. using blocks of 150mm thickness, in cement mortar 1:6 (1 cement : 6 coarse sand)p1«05.213
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For superstructure above plinth level up to floor two level, including all cost of materials, labour charges etc. using blocks of 150mm thickness, in cement mortar 1:4 (1 cement : 4 coarse sand)o1«05.223
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For superstructure above plinth level up to floor two level, including all cost of materials, labour charges etc. using blocks of 100mm thickness, in cement mortar 1:6 (1 cement : 6 coarse sand)5.233
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For superstructure above plinth level up to floor two level, including all cost of materials, labour charges etc. using blocks of 100mm thickness, in cement mortar 1:4 (1 cement : 4 coarse sand)5.244
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For superstructure above plinth level up to floor five level, including all cost of materials, labour charges etc. using blocks of 200mm thickness, in cement mortar 1:6 (1 cement : 6 coarse sand)p1­05.254
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For superstructure above plinth level up to floor five level, including all cost of materials, labour charges etc. using blocks of 200mm thickness, in cement mortar 1:4 (1 cement : 4 coarse sand)o1¬05.264
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For superstructure above plinth level up to floor five level, including all cost of materials, labour charges etc. using blocks of 150mm thickness, in cement mortar 1:6 (1 cement : 6 coarse sand)p1¬05.274
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For superstructure above plinth level up to floor five level, including all cost of materials, labour charges etc. using blocks of 150mm thickness, in cement mortar 1:4 (1 cement : 4 coarse sand)p1¬05.284
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For superstructure above plinth level up to floor five level, including all cost of materials, labour charges etc. using blocks of 100mm thickness, in cement mortar 1:6 (1 cement : 6 coarse sand)p1¬05.294
Providing and laying factory made precast cement concrete solid blocks of grade M10 from approved manufacturer: For superstructure above plinth level up to floor five level, including all cost of materials, labour charges etc. using blocks of 100mm thickness, in cement mortar 1:4 (1 cement : 4 coarse sand)o1¬0ÿRandom rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with cement mortar 1:6 (1 cement : 6 coarse sand)10)1>0@
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level with cement mortar 1:6 (1 cement : 6 coarse sand), including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.10O1d0lDry rubble masonry in foundation and plinth including levelling up upto plinth level with blasted hard stone101+0\Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite stone slab for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of area upto 0.50 sqm and of colour black, Cherry/Ruby red\Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite stone slab for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of area over 0.50 sqm and of colour black, Cherry/Ruby redpProviding and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite stone slab for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of area upto 0.50 sqm and all colour and texture except black, Cherry/Ruby redpProviding and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut granite stone slab for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of area over 0.50 sqm and all colour and texture except black, Cherry/Ruby redÆProviding edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 10'130ÇProviding edge moulding to 18 mm thick granite stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 10'140
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.1041Q07.09ÌProviding and fixing wedge expansion type hold fasteners on C.C./R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc. complete. Fastener with threaded dia 6 mm7.10ÍProviding and fixing wedge expansion type hold fasteners on C.C./R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc. complete. Fastener with threaded dia 10 mm7.11ÍProviding and fixing wedge expansion type hold fasteners on C.C./R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc. complete. Fastener with threaded dia 12 mm7.12±
Providing and fixing 75 mm high, 50 mm deep and 18 mm thick White Agaria Marble Stone slab table rubbed, edges rounded and polished, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.<1U0Ž1Ÿ07.13õ
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.!1:0

1'
07.14 Providing and laying Vitrified wall tiles with diferent sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Glazed vitrified tile polished finish of Size of tile 600x600 mm1)0Ê
18.500.17.15 Providing and laying Vitrified wall tiles with diferent sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Glazed Vitrified tiles Matt/Antiskid finish of size 600 x 600 mm1)0Ê
18.500.27.16šProviding and Fixing Armstrong or equivalent Channelled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a "Helmholtz" fluted perforation with consecutive 3mm wide groove followed by 21mm of visible pane. The edges of the panel shall be "tongue-and-grooved" to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.5. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm. The panels shall be mounted on special aluminium splines (keel) using inside clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) with Second class teak wood109.1.1š
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge (Note: Butt hinges and necessary screws shall be paid separately) with Second class teak wood of 30 mm thick shutters1=0k
19.5.1.2Z
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled ur panelled and glazed shutters 25 mm to 40 mm thick using Second class teak wood170D
19.7.1
Providing and fixing panelling for panelled or panelled and glazed shutters of 25 mm to 40 mm thickness for doors, windows and clerestory windows using pre-laminated particle board 12mm thick with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured)10C1K0g1‘0Å1
0k
Providing and fixing panelling for panelled or panelled and glazed shutters of 25 mm to 40 mm thickness for doors, windows and clerestory windows using pre-laminated particle board 12mm thick with decorative lamination on both sides, Grade I, Type II, IS:12823 marked (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured)10C1K0g1‘0Å1è01
Providing and fixing glazing for panelled or panelled and glazed shutters of 25 mm to 40 mm thickness for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10kg/sqm) (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured)101²0n
Providing and fixing panelling for panelled or panelled and glazed shutters of 25 mm to 40 mm thickness for doors, windows and clerestory windows using fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured)10˜1Æ04
Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not les

愠摮映硩湩⁧卉⁉慭歲摥‬卉ㄺ㐳ⰱ䴠匮‮敨癡⁹敷杩瑨戠楲桧⁴楦楮桳摥戠瑵⁴楨杮獥眠瑩⁨敮散獳牡⁹捳敲獷攠捴‮潣灭敬整㨠㔷㙸砰⸳〱洠譭牐癯摩湩⁧湡⁤楦楸杮䤠䥓洠牡敫Ɽ䤠㩓㌱ㄴ‬⹍⹓栠慥祶眠楥桧⁴牢杩瑨映湩獩敨⁤畢瑴栠湩敧⁳楷桴渠捥獥慳祲猠牣睥⁳瑥⹣挠浯汰瑥⁥›〵㑸砰⸲〵洠筭牐癯摩湩⁧湡⁤楦楸杮䤠㩓㈱ㄸ‷慭歲摥猠慴湩敬獳猠整汥戠瑵⁴楨杮獥眠瑩⁨瑳楡汮獥⁳瑳敥捳敲獷攠捴‮潣灭敬整㨠ㄠ㔲㙸破⸱〹洠筭牐癯摩湩⁧湡⁤楦楸杮䤠㩓㈱ㄸ‷慭歲摥猠慴湩敬獳猠整汥戠瑵⁴楨杮獥眠瑩⁨瑳楡汮獥⁳瑳敥捳敲獷攠捴‮潣灭敬整㨠ㄠ〰㕘堸⸱〹洠穭牐癯摩湩⁧湡⁤楦楸杮䤠㩓㈱ㄸ‷慭歲摥猠慴湩敬獳猠整汥戠瑵⁴楨杮獥眠瑩⁨瑳楡汮獥⁳瑳敥捳敲獷攠捴‮潣灭敬整㨠㜠砵㜴ㅸ㠮‰浭z倀潲楶楤杮愠摮映硩湩⁧卉ㄺ㠲㜱洠牡敫⁤瑳楡汮獥⁳瑳敥畢瑴栠湩敧⁳楷桴猠慴湩敬獳猠整汥猠牣睥⁳瑥⹣挠浯汰瑥⁥›〵㍸砷⸱〵洠詭牐癯摩湩⁧湡⁤楦楸杮䤠㩓㈱ㄸ‷慭歲摥猠慴湩敬獳猠整汥戠瑵⁴楨杮獥⠠敨癡⁹敷杩瑨 楷桴猠慴湩敬獳猠整汥猠牣睥⁳瑥⹣挠浯汰瑥⁥›㈱砵㐶㉸㔮‰浭Š倀潲楶楤杮愠摮映硩湩⁧卉ㄺ㠲㜱洠牡敫⁤瑳楡汮獥⁳瑳敥畢瑴栠湩敧⁳栨慥祶眠楥桧⥴眠瑩⁨瑳楡汮獥⁳瑳敥捳敲獷攠捴‮潣灭敬整㨠ㄠ〰㙸砰⸲〵洠襭牐癯摩湩⁧湡⁤楦楸杮䤠㩓㈱ㄸ‷慭歲摥猠慴湩敬獳猠整汥戠瑵⁴楨杮獥⠠敨癡⁹敷杩瑨 楷桴猠慴湩敬獳猠整汥猠牣睥⁳瑥⹣挠浯汰瑥⁥›㔷㕸砰⸲〵洠꭭ࠀ牐癯摩湩⁧湡⁤楦楸杮戠楲桧⁴楦楮桳摥戠慲獳ㄠ〰洠潭瑲捩⁥慬捴⁨湡⁤潬正眠瑩⁨‶敬敶獲愠摮愠瀠楡⁲景氠癥牥栠湡汤獥漠⁦灡牰癯摥焠慵楬祴眠瑩⁨敮散獳牡⁹捳敲獷攠捴‮潣灭敬整ᔮ㄀㼀 ꬀ࠀ牐癯摩湩⁧湡⁤楦楸杮挠牨浯畩汰瑡摥戠慲獳ㄠ〰洠潭瑲捩⁥慬捴⁨湡⁤潬正眠瑩⁨‶敬敶獲愠摮愠瀠楡⁲景氠癥牥栠湡汤獥漠⁦灡牰癯摥焠慵楬祴眠瑩⁨敮散獳牡⁹捳敲獷攠捴‮潣灭敬整ᔮ㄀㼀 ꨀ牐癯摩湩⁧湡⁤楦楸杮猠数楣污焠慵楬祴戠楲桧⁴楦楮桳摥戠慲獳挠灵潢牡⁤牯眠牡牤扯⁥潬正⁳楷桴映畯⁲敬敶獲漠⁦灡牰癯摥焠慵楬祴椠据畬楤杮渠捥獥慳祲猠牣睥⁳瑥⹣挠浯汰瑥⹥㐠‰浭ª倀潲楶楤杮愠摮映硩湩⁧灳捥慩畱污瑩⁹牢杩瑨映湩獩敨⁤牢獡⁳畣扰慯摲漠⁲慷摲潲敢氠捯獫眠瑩⁨潦牵氠癥牥⁳景愠灰潲敶⁤畱污瑩⁹湩汣摵湩⁧敮散獳牡⁹捳敲獷攠捴‮潣灭敬整‮〵洠ꩭ牐癯摩湩⁧湡⁤楦楸杮猠数楣污焠慵楬祴戠楲桧⁴楦楮桳摥戠慲獳挠灵潢牡⁤牯眠牡牤扯⁥潬正⁳楷桴映畯⁲敬敶獲漠⁦灡牰癯摥焠慵楬祴椠据畬楤杮渠捥獥慳祲猠牣睥⁳瑥⹣挠浯汰瑥⹥㘠‵浭ª倀潲楶楤杮愠摮映硩湩⁧灳捥慩畱污瑩⁹牢杩瑨映湩獩敨⁤牢獡⁳畣扰慯摲漠⁲慷摲潲敢氠捯獫眠瑩⁨潦牵氠癥牥⁳景愠灰潲敶⁤畱污瑩⁹湩汣摵湩⁧敮散獳牡⁹捳敲獷攠捴‮潣灭敬整‮㔷洠癭ࠀ牐癯摩湩⁧湡⁤楦楸杮㔠‰浭戠楲桧⁴楦楮桳摥戠慲獳挠灵戠慯摲漠⁲慷摲潲敢欠潮⁢景愠灰潲敶⁤畱污瑩⁹楷桴渠捥獥慳祲猠牣睥⹳11K0T倀潲楶楤杮愠摮映硩湩⁧牢杩瑨映湩獩敨⁤牢獡⁳慨摮敬⁳楷桴猠牣睥⁳瑥⹣挠浯汰瑥㩥ㄠ㔲洠呭牐癯摩湩⁧湡⁤楦楸杮戠楲桧⁴楦楮桳摥戠慲獳栠湡汤獥眠瑩⁨捳敲獷攠捴‮潣灭敬整›〱‰浭S倀潲楶楤杮愠摮映硩湩⁧牢杩瑨映湩獩敨⁤牢獡⁳慨摮敬⁳楷桴猠牣睥⁳瑥⹣挠浯汰瑥㩥㜠‵浭pЈ倀潲楶楤杮愠摮映硩湩⁧牢杩瑨映湩獩敨⁤牢獡⁳慨杮湩⁧祴数映潬牯搠潯⁲瑳灯数⁲楷桴渠捥獥慳祲猠牣睥ⱳ攠捴‮潣灭敬整┮㄀⨀ 㸀㄀䨀 ࠁ牐癯摩湩⁧湡⁤楦楸杮愠畬業楮浵搠敩挠獡⁴潢祤琠扵汵牡琠灹⁥湵癩牥慳票牤畡楬⁣潤牯挠潬敳⁲栨癡湩⁧牢湡⁤潬潧眠瑩⁨卉ⱉ䤠⁓›㔳㐶‬浥潢獳摥漠桴⁥潢祤‬潤牯眠楥桧⁴灵潴㌠‵杫愠摮搠潯⁲楷瑤⁨灵潴㜠〰洠⥭‬楷桴渠捥獥慳祲愠捣獥潳楲獥愠摮猠牣睥⁳瑥⹣挠浯汰瑥⹥D1Y0˜1®0ĹЈ倀潲楶楤杮愠摮映硩湩⁧污浵湩畩硥牴摵摥猠捥楴湯戠摯⁹畴畢慬⁲祴数甠楮敶獲污栠摹慲汵捩搠潯⁲汣獯牥⠠慨楶杮戠慲摮氠杯楷桴䤠䥓‬卉㨠㌠㘵ⰴ攠扭獯敳⁤湯琠敨戠摯ⱹ搠潯⁲敷杩瑨映潲㘳欠⁧潴㠠‰杫愠摮搠潯⁲楷瑤⁨牦浯㜠㄰洠潴ㄠ〰‰浭Ⱙ眠瑩⁨潤扵敬猠数摥愠橤獵浴湥⁴楷桴渠捥獥慳祲愠捣獥潳楲獥愠摮猠牣睥⁳瑥⹣挠浯汰瑥⹥L1a0 1¿0u倀潲楶楤杮愠摮映硩湩⁧牢杩瑨映湩獩敨⁤牢獡⁳慨灳愠摮猠慴汰⁥猨晡瑥⁹祴数 楷桴渠捥獥慳祲猠牣睥⁳瑥⹣挠浯汰瑥⁥›㔱‰浭t倀潲楶楤杮愠摮映硩湩⁧牢杩瑨映湩獩敨⁤牢獡⁳慨灳愠摮猠慴汰⁥猨晡瑥⁹祴数 楷桴渠捥獥慳祲猠牣睥⁳瑥⹣挠浯汰瑥⁥›〹洠牐癯摩湩⁧湡⁤楦楸杮愠畬業楮浵猠楬楤杮搠潯⁲潢瑬ⱳ䤠䥓洠牡敫⁤湡摯獩摥⠠湡摯捩挠慯楴杮渠瑯氠獥⁳桴湡朠慲敤䄠⁃〱愠⁳数⁲卉㨠ㄠ㘸⤸‬牴湡灳牡湥⁴牯搠敹⁤潴爠煥極敲⁤潣潬牵漠⁲桳摡ⱥ眠瑩⁨畮獴愠摮猠牣睥⁳瑥⹣挠浯汰瑥⁥›〳砰㘱洠牐癯摩湩⁧湡⁤楦楸杮愠畬業楮浵猠楬楤杮搠潯⁲潢瑬ⱳ䤠䥓洠牡敫⁤湡摯獩摥⠠湡摯捩挠慯楴杮渠瑯氠獥⁳桴湡朠慲敤䄠⁃〱愠⁳数⁲卉㨠ㄠ㘸⤸‬牴湡灳牡湥⁴牯搠敹⁤潴爠煥極敲⁤潣潬牵漠⁲桳摡ⱥ眠瑩⁨畮獴愠摮猠牣睥⁳瑥⹣挠浯汰瑥⁥㈺〵ㅸ‶浭㠀㔮牐癯摩湩⁧湡⁤楦楸杮愠畬業楮浵琠睯牥戠汯獴‬卉⁉慭歲摥‬湡摯獩摥⠠湡摯捩挠慯楴杮渠瑯氠獥⁳桴湡朠慲敤䄠⁃〱愠⁳数⁲卉㨠ㄠ㘸‸ 牴湡灳牡湥⁴牯搠敹⁤潴爠煥極敲⁤潣潬牵漠⁲桳摡ⱥ眠瑩⁨敮散獳牡⁹捳敲獷攠捴‮潣灭敬整㨠㌠〰ㅸ‰浭㠀㔮牐癯摩湩⁧湡⁤楦楸杮愠畬業楮浵琠睯牥戠汯獴‬卉⁉慭歲摥‬湡摯獩摥⠠湡摯捩挠慯楴杮渠瑯氠獥⁳桴湡朠慲敤䄠⁃〱愠⁳数⁲卉㨠ㄠ㘸‸ 牴湡灳牡湥⁴牯搠敹⁤潴爠煥極敲⁤潣潬牵漠⁲桳摡ⱥ眠瑩⁨敮散獳牡⁹捳敲獷攠捴‮潣灭敬整㨠㈠〵ㅸ‰浭㠀㔮퐳ࠀ牐癯摩湩⁧湡⁤楦楸杮ㄠ㔲洠污浵湩畩慨摮敬ⱳ䤠䥓洠牡敫Ɽ愠潮楤敳⁤愨潮楤⁣潣瑡湩⁧潮⁴敬獳琠慨牧摡⁥䍁ㄠ‰獡瀠牥䤠⁓›㠱㠶 牴湡灳牡湥⁴牯搠敹⁤潴爠煥極敲⁤潣潬牵漠⁲桳摡ⱥ眠瑩⁨敮散獳牡⁹捳敲獷攠捴‮潣灭敬整1-0㠀㔮ࠀ牐癯摩湩⁧湡⁤楦楸杮愠畬業楮浵栠湡楧杮映潬牯猠湩汧⁥畲扢牥搠潯⁲瑳灯数Ⱳ䤠䥓洠牡敫Ɽ愠潮楤敳⁤愨潮楤⁣潣瑡湩⁧潮⁴敬獳琠慨牧摡⁥䍁ㄠ‰獡瀠牥䤠⁓›㠱㠶 牴湡灳牡湥⁴牯搠敹⁤潴爠煥極敲⁤潣潬牵愠摮猠慨敤‬楷桴渠捥獥慳祲猠牣睥⁳瑥⹣挠浯汰瑥⹥-1G0㠀㔮혵ࠀ牐癯摩湩⁧湡⁤楦楸杮愠畬業楮浵挠獡浥湥⁴瑳祡ⱳ䤠䥓洠牡敫Ɽ愠潮楤敳⁤愨潮楤⁣潣瑡湩⁧潮⁴敬獳琠慨牧摡⁥䍁ㄠ‰獡瀠牥䤠⁓›㠱㠶 牴湡灳牡湥⁴牯搠敹⁤潴爠煥極敲⁤潣潬牵愠摮猠慨敤‬楷桴渠捥獥慳祲猠牣睥⁳瑥⹣挠浯汰瑥⹥1-0㠀㔮शࠁ牐癯摩湩⁧湡⁤楦楸杮戠楲桧⁴楦楮桳摥戠慲獳ㄠ〰洠潭瑲捩⁥慬捴⁨湡⁤潬正‬卉⁉慭歲摥‬楷桴猠硩氠癥牥⁳湡⁤⁡慰物漠⁦湡摯獩摥⠠湡摯捩挠慯楴杮渠瑯氠獥⁳桴湡朠慲敤䄠⁃〱愠⁳数⁲卉㨠ㄠ㘸⤸愠畬業楮浵氠癥牥栠湡汤獥漠⁦灡牰癯摥焠慵楬祴眠瑩⁨敮散獳牡⁹捳敲獷攠捴‮潣灭敬整ᔮ㄀䠀 琀㄀簀 뤀㄀퀀 Ѐ⸸㜵—Ȉ倀潲楶楤杮愠摮映硩湩⁧潰摷牥挠慯整⁤整敬捳灯捩搠慲敷⁲档湡敮獬㌠〰洠潬杮眠瑩⁨敮散獳牡⁹捳敲獷攠捴‮潣灭敬整愠⁳数⁲楤敲瑣潩獮漠⁦湅楧敮牥‭湩挭慨杲⹥#1I0㠀㔮㈸ंProviding and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension of 48x40 mm (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19x19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge"110㠀㔮甹ࠄ牐癯摩湩⁧湡⁤楦楸杮㈠‴浭琠楨正映捡潴祲洠摡⁥噐⁃潤牯猠畨瑴牥⁳慭敤漠⁦瑳汹獥愠摮爠楡獬漠⁦⁡偵䍖栠汯潬⁷敳瑣潩景猠穩⁥㤵㉸‴浭愠摮眠污桴捩湫獥⁳′浭⠠₱⸰′浭 楷桴椠扮極瑬攠杤湩⁧湯戠瑯⁨楳敤⁳潴攠楸瑳湩⁧潤牯映慲敭⹳吠敨猠祴敬⁳湡⁤慲汩⁳業牴摥愠摮樠楯瑮愠⁴桴⁥潣湲牥⁳祢洠慥獮漠⁦⹍⹓朠污慶楮敳⽤瀠慬瑳捩戠慲正瑥⁳景猠穩⁥㔷㉸〲洠慨楶杮眠污桴捩湫獥⁳⸱‰浭愠摮猠慴湩敬獳猠整汥猠牣睥⹳吠敨猠祴敬⁳景琠敨猠畨瑴牥爠楥普牯散⁤祢椠獮牥楴杮朠污慶楮敳⁤⹍⹓琠扵⁥景猠穩⁥〲㉸‰浭愠摮ㄠ洠넨〠ㄮ洠⥭眠污桴捩湫獥⹳吠敨氠捯慲汩洠摡⁥灵漠⁦䠧‧敳瑣潩Ɱ愠甠噐⁃潨汬睯猠捥楴湯漠⁦楳敺ㄠ〰㉸‴浭愠摮㈠洠넨〠㈮洠⥭眠污桴捩湫獥ⱳ映硩摥琠桴⁥桳瑵整⁲瑳汹獥戠⁹敭湡⁳景瀠慬瑳捩术污慶楮敳⁤⹍⹓✠❕挠敬瑡⹳吠敨猠畨瑴牥映慲敭映汩敬⁤楷桴愠甠噐⁃畭瑬⵩档浡敢敲⁤楳杮敬瀠湡汥漠⁦楳敺渠瑯氠獥⁳桴湡㘠〲洠Ɑ栠癡湩⁧癯牥愠汬琠楨正敮獳漠⁦〲洠湡⁤‱浭⠠₱⸰‱浭 慷汬琠楨正敮獳‮桔⁥慰敮獬映汩敬⁤敶瑲捩污祬愠摮琠敩戠牡愠⁴睴汰捡獥戠⁹湩敳瑲湩⁧潨楲潺瑮污祬㘠洠慧癬湡獩摥䴠匮‮潲⁤湡⁤慦瑳湥摥眠瑩⁨畮獴愠摮眠獡敨獲‬潣灭敬整愠⁳数⁲慭畮慦瑣牵牥猧猠数楣楦慣楴湯愠摮搠物捥楴湯漠⁦湅楧敮牥椭⵮档牡敧‮䘨牯圠䌮‮湡⁤慢桴潲浯搠潯⁲桳瑵整⥲⸮㄀㼀 Ѐ⸸〶ŬĈ倀潲楶楤杮愠摮映硩湩⁧㈱洠桴捩慰敮汬湩⁧牯瀠湡汥楬杮愠摮朠慬楺杮椠瀠湡汥敬⁤牯瀠湡汥敬⁤湡⁤汧穡摥猠畨瑴牥⁳潦⁲潤牯ⱳ眠湩潤獷愠摮挠敬敲瑳牯⁹楷摮

ws (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Marine plywood conforming to IS: 710H
18.61Ê
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge1'0:1G0a1o0É1
08.62–
Providing and fixing cup board shutters with 25 mm thick veneered particle board with decorative veneering on one side and commercial veneering on other side, IS:3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge.1'081P0V108.63‹Providing and fixing bright/matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm8.64ŠProviding and fixing bright/matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 100mm8.65u
Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately).91Z08.66F
Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer- in-charge.81Z08.67Ä
Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer- in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)1%061m0}1’08.68
Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails, screws, etc., complete as per direction of Engineer-in-charge. 1>0O1c08.69›Providing and fixing stainless steel fancy handle (200 mm size) of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.1108.70
Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.%1?08.71¸Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.%1W08.72Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in-charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) 1P08.73ûProviding and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge./1D08.74Providing and fixing Zebra blinds curtain of preferred colour, including cost and conveyance complete, as per instruction of Engineer-in-charge.8.75‡Providing and fixing bright finished Stainless Steel Aldrop (Sliding door bolt) (250x16x5 mm size) with necessary screws etc. complete.%1O0ÑStructural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.31D0F1M0R1]09
Steel work in built up tubular (Electric resistance or induction butt welded, round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.10 1L0~1 0=
Steel work in built up tubular (hot-dip galvanized (Tata Structura or equivalent) round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.10 120‚1‰0½
Steel work in built up tubular (hot-dip galvanized (Tata Structura or equivalent) round, square or rectangular hollow tubes etc.) for curved trusses (Arch, Parabolic, etc.), including uniformly machine bending the section to required curves, cutting, hoisting, lifting with mechanical cranes etc, and fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.120†1”0
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required, in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.Æ1
0ÜProviding and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, using E.R.W. tubes, including applying priming coat of approved steel primer.101¡0ÚProviding and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, using G.I. pipes, including applying priming coat of approved steel primer.101Ÿ0’Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)180ÑProviding & fixing Stainless steel (grade 304) fly proof wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.1C0©
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.1I0ó40 mm thick cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.1$0 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.1$0˜Cement plaster skirting 18 mm thick up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.10‹Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.10G
Chequered precast cement concrete tiles 22 mm thick, made using ordinary cement mixed with dark shade pigment, in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)130.
Polished 8 mm thick Raj Nagar marble tiles work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete.1U04
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana white second quality1011.23.1'
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Raj Nagar plain1011.23.2$
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Agaria White1011.23.3,
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Udaipur green marble1011.23.5)
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Pink plain marble101&011.23.6§
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.1B0À
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.1C0ò
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.!1;0

1'
0£
Providing and laying vitrified floor tiles of size 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.1=0æ1þ0Ì
Providing and laying Vitrified tiles of size 600x600 mm in floor (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).170
14
0¶
Providing and laying Vitrified tiles of size 600x600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.170Ô1
0ß
Providing and laying Vitrified tiles of size 600x600 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)170è1I
0¸Providing and laying Double charge vitrified floor tiles polished finish of size 600 x 600 mm in floor (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.01]0±Providing and laying Glazed vitrified floor tiles polished finish of size 600 x 600 mm in floor (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.01V0¶Providing and laying Glazed vitrified floor tiles Matt/Antiskid finish of size 600 x 600 mm in floor (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.01[0¢Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.1.010.23¬Fixing glazed/Ceramic/Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.>1k010.24-
Grouting the joints of 600x600 mm sized flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Z1i010.25tDeduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.1010.26AProviding and laying Polished Granite stone slab flooring of colour Black, Cherry/Ruby Red or equivalent in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.190D1Z010.27LProviding and laying Polished Granite stone slab flooring of all colour and texture, except Black, Cherry/Ruby Red, in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.190U1s010.28Ê
Providing and laying good quality floor carpet with quick-set adhesive including cost and conveyance of all materials and labour charges etc. complete. Synthetic floor carpet of 4mm or nearest thickness˜111.505.1ñProviding and fixing on wall face single socketed unplasticised Rigid PVC rain water pipes of 110 mm diameter conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion@1m0‡10

Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. 110 mm Couplerÿ1

Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. 110 mm Single pushfit Couplerÿ1"

Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. 110x110x110 mm Single tee with doorÿ1%

Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. 110x110x110 mm Single tee without doorÿ1

Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion. 110 mm Bend 87.5°ÿ1

Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:1

祔数䄠‬湩汣摵湩⁧潪湩楴杮眠瑩⁨敳污爠湩⁧潣普牯業杮琠卉㔺㠳ⰲ氠慥楶杮ㄠ‰浭朠灡映牯琠敨浲污攠灸湡楳湯‮ㄱ‰浭匠潨⁥倨慬湩Ｉ㄀䰀ࠁ牐癯摩湩⁧湡⁤楦楸杮ㄠ〱洠楤⁡湵汰獡楴楣敳⁤噐⁃楰数挠楬獰漠⁦灡牰癯摥搠獥杩潴甠灮慬瑳捩獩摥ⴠ倠䍖爠楡慷整⁲楰数⁳祢洠慥獮漠⁦〵㕸砰〵洠慨摲眠潯⁤汰杵ⱳ猠牣睥摥眠瑩⁨⹍⹓猠牣睥⁳景爠煥極敲⁤敬杮桴‬湩汣摵湩⁧畣瑴湩⁧牢捩潷歲愠摮映硩湩⁧湩挠浥湥⁴潭瑲牡ㄠ㐺⠠‱散敭瑮›‴潣牡敳猠湡⥤愠摮洠歡湩⁧潧摯琠敨眠污瑥⹣挠浯汰瑥⹥1<0Ȉ倀潲楶楤杮愠摮映硩湩⁧潴琠敨椠汮瑥洠畯桴漠⁦慲湩眠瑡牥瀠灩⁥慣瑳椠潲牧瑡湩⁧㔱挠楤浡瑥牥愠摮眠楥桧湩⁧潮⁴敬獳琠慨㐴‰牧浡⹳;1R0ࡓĈ倀潲楶楤杮愠摮映硩湩⁧慦獬⁥散汩湩⁧瑡愠汬栠楥桧獴椠据畬楤杮瀠潲楶楤杮愠摮映硩湩⁧景映慲敭眠牯慭敤漠⁦灳捥慩敳瑣潩獮‬潰敷⁲牰獥敳⁤牦浯䴠匮‮桳敥獴愠摮†慧癬湡穩摥眠瑩⁨楺据挠慯楴杮漠⁦㈱‰浧⽳煳⠠潢桴†楳敤椠据畬楳敶 獡瀠牥䤠⁓›㜲‷湡⁤潣獮獩楴杮漠⁦湡汧⁥汣慥獴漠⁦楳敺㈠‵浭眠摩⁥⁸⸱‶浭琠楨正眠瑩⁨汦湡敧⁳景㈠‷浭愠摮㌠洷Ɑ愠⁴㈱〰洠散瑮敲琠散瑮敲‬湯⁥汦湡敧映硩摥琠桴⁥散汩湩⁧楷桴搠獡⁨慦瑳湥牥ㄠ⸲‵浭搠慩砠㔠‰浭氠湯⁧楷桴㘠洠楤⁡潢瑬ⱳ漠桴牥映慬杮⁥景挠敬瑡映硩摥琠桴⁥湡汧⁥慨杮牥⁳景㈠砵〱へ㔮‰浭漠⁦敲畱物摥氠湥瑧⁨楷桴渠瑵⁳…潢瑬⁳景爠煥極敲⁤楳敺愠摮漠桴牥攠摮漠⁦湡汧⁥慨杮牥映硩摥眠瑩⁨湩整浲摥慩整䜠䤮‮档湡敮獬㐠砵㔱へ㤮洠畲湮湩⁧瑡琠敨猠慰楣杮漠⁦㈱〰洠散瑮敲琠散瑮敲‬潴眠楨档琠敨挠楥楬杮猠捥楴湯〠㔮洠桴捩潢瑴浯眠摥敧漠⁦〸洠楷桴琠灡牥摥映慬杮獥漠⁦㘲洠慥档栠癡湩⁧楬獰漠⁦〱㔮洠Ɑ愠⁴㔴‰浭挠湥牴⁥潴挠湥牴ⱥ猠慨汬戠⁥楦數⁤湩愠搠物捥楴湯瀠牥数摮捩汵牡琠⹇⹉椠瑮牥敭楤瑡⁥档湡敮楷桴挠湯敮瑣湩⁧汣灩⁳慭敤漠瑵漠⁦⸲㐶洠楤⁡⁸㌲‰浭氠湯⁧⹇⹉眠物⁥瑡攠敶祲樠湵瑣潩Ɱ椠据畬楤杮映硩湩⁧数楲敭整⁲档湡敮獬〠㔮洠桴捩㜲洠楨桧栠癡湩⁧汦湡敧⁳景㈠‰浭愠摮㌠‰浭氠湯Ⱨ琠敨瀠牥浩瑥牥漠⁦散汩湩⁧楦數⁤潴眠污⽬慰瑲瑩潩楷桴琠敨栠汥⁰景爠睡汰杵⁳瑡㐠〵洠散瑮敲‬楷桴㈠‵浭氠湯⁧牤⁹慷汬猠牣睥⁳⁀㌲‰浭椠瑮牥慶ⱬ椠据畬楤杮映硩湩⁧景朠灹畳潢牡⁤潴挠楥楬杮猠捥楴湯愠摮瀠牥浩瑥牥挠慨湮汥眠瑩⁨桴⁥敨灬漠⁦牤⁹慷汬猠牣睥⁳景猠穩⁥⸳‵⁸㔲洠瑡㈠〳洠⽣Ᵽ椠据畬楤杮樠楯瑮湩⁧湡⁤楦楮桳湩⁧潴愠映畬桳映湩獩⁨景琠灡牥摥愠摮猠畱牡⁥摥敧⁳景琠敨戠慯摲眠瑩⁨敲潣浭湥敤⁤潪湩楴杮挠浯潰湵⁤‬潪湩楴杮琠灡獥Ⱐ映湩獩楨杮眠瑩⁨潪湩楴杮挠浯潰湵⁤湩㌠氠祡牥⁳潣敶楲杮甠瑰㔱‰浭漠潢桴猠摩獥漠⁦潪湩⁴湡⁤睴潣瑡⁳景瀠楲敭⁲畳瑩扡敬映牯戠慯摲‬污獡瀠牥洠湡晵捡畴敲❲⁳灳捥晩捩瑡潩湡⁤污潳椠据畬楤杮琠敨挠獯⁴景洠歡湩⁧灯湥湩獧映牯氠杩瑨映瑩楴杮ⱳ朠楲汬ⱳ搠晩獵牥ⱳ挠瑵畯獴洠摡⁥楷桴映慲敭漠⁦数楲敭整⁲档湡敮獬猠極慴汢⁹楦數Ɽ愠汬挠浯汰瑥⁥獡瀠牥搠慲楷杮ⱳ猠数楣楦慣楴湯愠摮搠物捥楴湯漠⁦桴⁥湅楧敮牥椠桃牡敧戠瑵攠捸畬楤杮琠敨挠獯⁴景瀠楡瑮湩⁧楷桴㨠ㄠ⸲‵浭琠楨正琠灡牥摥攠杤⁥祧獰浵瀠慬湩戠慯摲挠湯潦浲湩⁧潴䤠㩓㈠㤰ⴵ⠠慐瑲䤠 ㈺㄰‱䈨慯摲眠瑩⁨䥂⁓散瑲晩捩瑡潩慭歲⥳ߚ1㄀⸲㔴ㄮࠔĈ倀潲楶楤杮愠摮映硩湩⁧慦獬⁥散汩湩⁧瑡愠汬栠楥桧獴椠据畬楤杮瀠潲楶楤杮愠摮映硩湩⁧景映慲敭眠牯慭敤漠⁦灳捥慩敳瑣潩獮‬潰敷⁲牰獥敳⁤牦浯䴠匮‮桳敥獴愠摮†慧癬湡穩摥眠瑩⁨楺据挠慯楴杮漠⁦㈱‰浧⽳煳⠠潢桴†楳敤椠据畬楳敶 獡瀠牥䤠⁓›㜲‷湡⁤潣獮獩楴杮漠⁦湡汧⁥汣慥獴漠⁦楳敺㈠‵浭眠摩⁥⁸⸱‶浭琠楨正眠瑩⁨汦湡敧⁳景㈠‷浭愠摮㌠洷Ɑ愠⁴㈱〰洠散瑮敲琠散瑮敲‬湯⁥汦湡敧映硩摥琠桴⁥散汩湩⁧楷桴 dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, difusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant boardÚ112.45.3¼Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.;1?0_1{0ÐProviding & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)..1<0´Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately)."120xProviding and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required./1=0«
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws cmplete: Ridges plain (500 - 600mm)1I0±
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws cmplete: Flashings/ Aprons.( Upto 600 mm)1I011.18ª
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws cmplete: Barge board (Upto 300 mm)1I011.19œ
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws cmplete: Crimp curve1I011.20ŒProviding and fixing tiled false ceiling of 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, (made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit), in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main 'T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm die and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.,1r011.21‹Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer's specifications and as approved by Engineer-in-Charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., washing with water all complete. The contractor shall give guarantee for the perfomance of SRI and also the durabitity of coating, all complete as per direction of Engineer-in-Charge.$15011.22ÞRefixing on roof the dismantled pressed clay roofing tiles (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).10<1J011.23ÜRefixing on roof the dismantled pressed clay ridge tiles (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).18011.24
Providing 200mm or equivalent square type UPVC gutter with necessary clamps, bolts, nuts and specials such as nozzles, sockets, stoppers, etc., including cost and conveyance of all materials and labour charges etc., complete as per the instructions of the dept. officers15011.25Providing and fixing in roof with necessary self tapping screws sandwich panel Trafford roofing sheet with total thickness of 50mm with polyurethane foam of Density 36 Kg/cum plus or minus 2 Kg/cum with thermal conductivity with of less than or equal to 22 MW/MK and form tensile strength (adhesion) at 80C Greater than or equal to 80Kpa and youngs modulus at 80C greater than or equal to 2500 Kpa sandwiched between two GI sheets. The external and internal sheet shall have thickness of 0.40mm and 0.30mm respectively. The external and internal sheet shall be JSW/TATA/Bhushan/LLoyds make having a minimum 150 GSM galvalume coating pre-painted with approved colour and shade by the Engineer in charge with an SMP coating of 18 microns over epoxy coats of 7 micronsA1f011.26üProviding and fixing false ceiling with PVC plain panel board of 7.5 mm or nearest thickness of approved quality in aluminium frame work with necessary edge/intermediate trims, clips, screws, etc. complete (aluminium framework shall be paid separately)17011.27
Providing and fixing false ceiling with PVC panel board of 7.5 mm or nearest thickness of approved wooden grain design & quality in aluminium frame work with necessary edge/intermediate trims, clips, screws, etc. complete (aluminium framework shall be paid separately)110c1v011.28YProviding and Fixing of Armstrong or equvalent Soft Fibre Acoustical Suspended Ceiling System with Optra (Microlook) EDGE TILES WITH ARMSTRONG 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 95 percentage, NRC 0.9 to 1.0, Light Reflectance 85percentage, Colour White, Fire Performance UK Class o Class 1 (BS 476 pt . 6 and 7) in module size of 600 x 600 x 15mm, suitable for Green Building application, with Recycled content of 66 percentage GW and 74 percentage RW 74 percentage. The tile shall be laid on Armstrong Suprafine 32 with 15 mm wide T section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.00 Kgs/M2. The T Sections have a Galvanizing of 90 grams per m2. as per instruction of engineer in charge712 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)10-110912 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand)10-130712 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)10-110912 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand)10-130g12 mm cement plaster of mix 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.10-130J1W0}Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.1M0SFlush/ Ruled pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand)10Y
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram/litre, of approved manufacturer, of required shade and colour, all complete, on new work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre1/0Ì1×0
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram/litre, of approved manufacturer, of required shade and colour, all complete, on old work (one or more coats) to give an even shade.1/0Ì1Ø0¿Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufac

猠湹桴瑥捩攠慮敭慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥潴朠癩⁥湡攠敶桳摡⁥湯渠睥眠牯๫㄀㤀 爀㄀ࠀ慐湩楴杮眠瑩⁨睴牯洠牯⁥潣瑡⁳景猠湹桴瑥捩攠慮敭慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥景爠煥極敲⁤潣潬牵漠敮⁷潷歲‬癯牥愠湵敤捲慯⁴景猠極慴汢⁥桳摡⁥楷桴漠摲湩牡⁹慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥潴朠癩⁥湡攠敶桳摡⹥190o1Ÿ0‘̈倀楡瑮湩⁧楷桴漠敮漠⁲潭敲挠慯獴漠⁦祳瑮敨楴⁣湥浡汥瀠楡瑮漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲漠⁦敲畱物摥挠汯畯⁲潴朠癩⁥湡攠敶桳摡⁥湯漠摬眠牯⹫190 1v̈倀楡瑮湩⁧楷桴琠潷漠⁲潭敲挠慯獴漠⁦污浵湩畩慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥潴朠癩⁥湡攠敶桳摡⁥湯渠睥眠牯൫㄀㈀ 樀㄀瘀ࠀ慐湩楴杮眠瑩⁨湯⁥牯洠牯⁥潣瑡⁳景愠畬業楮浵瀠楡瑮漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲琠楧敶愠癥湥猠慨敤漠汯⁤潷歲120j1Ò̈䘀湩獩楨杮眠瑩⁨灅硯⁹慰湩⁴琨潷漠⁲潭敲挠慯獴 瑡愠汬氠捯瑡潩獮瀠敲慰敲⁤湡⁤灡汰敩⁤獡瀠牥洠湡晵捡畴敲❲⁳灳捥晩捩瑡潩獮椠据畬楤杮愠灰潲牰慩整瀠楲業杮挠慯ⱴ瀠敲慰慲楴湯漠⁦畳晲捡ⱥ攠捴‮潣灭敬整‬湯猠整汥眠牯ཫ㄀ᨀ 씀㄀픀ࠀ楆楮桳湩⁧楷桴䔠潰祸瀠楡瑮⠠睴牯洠牯⁥潣瑡⥳愠⁴污潬慣楴湯⁳牰灥牡摥愠摮愠灰楬摥愠⁳数⁲慭畮慦瑣牵牥猧猠数楣楦慣楴湯⁳湩汣摵湩⁧灡牰灯楲瑡⁥牰浩湩⁧潣瑡‬牰灥牡瑡潩景猠牵慦散‬瑥⹣挠浯汰瑥ⱥ漠潣据敲整眠牯ཫ㄀ᨀ 씀㄀堀ࠀ牆湥档猠楰楲⁴潰楬桳湩⁧湯渠睥眠牯獫⠠睴牯洠牯⁥潣瑡⥳椠据畬楤杮愠挠慯⁴景眠潯⁤楦汬牥1%0XȈ䘀敲据⁨灳物瑩瀠汯獩楨杮漠汯⁤潷歲⁳漨敮漠⁲潭敲挠慯獴 湩汣摵湩⁧⁡潣瑡漠⁦潷摯映汩敬r㄀␀ 眀ࠅ潐楬桳湩⁧湩栠杩⁨汧獯⽳慭瑴映湩獩⁨敭慬業敮挠敬牡瀠汯獩⁨湯眠潯⁤潷歲椠敲畱物摥挠汯牯眯潯敤桳摡⁥整瑸牵⁥楷桴映汯潬楷杮瀠潲散獳椠桴⁥敳畱湥散愠⁳敤慴汩摥戠汥睯›ㄊ‮桔⁥畳晲捡⁥潴戠⁥潰楬桳摥椠⁳畲扢摥眠瑩⁨慳摮瀠灡牥㠠⼰ㄠ〲渠⹯愠摮琠敨楷桴猠湡⁤慰数⁲景ㄠ〶ㄯ〸渠獯‮㈊‮灁汰楹杮琠潷挠慯獴漠⁦敳污牥眠瑩⁨灳慲⁹畧湡⁤污潬楷杮猠晵楦楣湥⁴牤楹杮琠浩⁥潦⁲猱⁴潣瑡愠摮㈠摮挠慯⁴獩愠汬睯摥琠牤⁹潦⁲‸潴ㄠ′牨⹳ਠ⸳传牤楹杮漠⁦敳污牥挠慯ⱴ眠瑥爠扵楢杮眠瑩⁨浥牥⁹汣瑯⁨景映湩牥朠慲楤杮眠瑩⁨浡汰⁥慷整⁲潴爠浥癯⁥硥散獳猠慥敬⁲慬敹⁲湡⁤慭敫琠敨猠牵慦散映牵桴牥猠潭瑯⁨晡整⁲桴獩眠瑥爠扵楢杮‬桴湥猠牵慦散椠⁳灡汰敩⁤楷桴猠数楣污朠慲敤洠汥浡湩⁥楦汬牥⁳潴映汩污桴⁥浳污湡⁤楢⁧潨敬⽳牧潯敶⁳瑥⹣䘠汩敬⁲潣瑡琠敢愠汬睯摥琠牤⁹潦⁲‴潴㘠栠獲漠桷捩⁨条楡⁡楬桧⁴敷⁴畲扢湩⁧獩搠湯⁥桴獩猠牵慦散椠⁳畦瑲敨⁲污潬敷⁤潴搠祲映牯ㄠ′牨⹳ਠ⸴传桴獩‬猱⁴潣瑡漠⁦敭慬業敮瀠汯獩⁨獩愠灰楬摥眠瑩⁨灳慲⁹畧獵湩⁧敭慬業敮挠敬牡瀠汯獩⁨湡⁤敭慬業敮琠楨湮牥椠敲畱物摥瀠潲潰瑲潩⹮吠楨⁳猱⁴潣瑡椠⁳污潬敷⁤潴搠祲映牯㈠‴牨⁳桴湥琠楨⁳牤⁹畳晲捡⁥獩愠慧湩映湩⁥敷⁴畲扢摥猠潭瑯ⱨ眠楨档椠⁳畦瑲敨⁲污潬敷⁤潴搠祲映牯ㄠ′牨⹳吠敨映湩污洠汥浡湩⁥潰楬桳椠⁳灡汰敩⁤楷桴挠浯牰獥潳⁲牰獥畳敲猠牰祡朠湵甠楳杮洠汥浡湩⁥汣慥⁲潰楬桳愠摮洠汥浡湩⁥桴湩敮⁲業數⁤湩爠煥極敲⁤牰灯牯楴湯挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧‮䘨湩污挠慯⁴潴戠⁥潤敮椠‱牯㈠氠祡牥⁳楷桴畯⁴慧⁰景琠浩⹥ഩ㄀㤀 ㌀ࠀ敍慬業敮瀠汯獩楨杮漠潷摯眠牯漨敮漠⁲潭敲挠慯⥴.㄀ἀ 䈀ࠀ敌瑴牥湩⁧楷桴戠慬正䨠灡湡瀠楡瑮漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲1 0FȈ刀ⵥ敬瑴牥湩⁧楷桴戠慬正䨠灡湡瀠楡瑮漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲.㄀␀ 氀ࠀ慐湩楴杮⠠湯⁥牯洠牯⁥潣瑡⥳眠瑩⁨汢捡慊慰慰湩⁴景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥潴朠癩⁥湡攠敶桳摡⹥130¬Ȉ䘀湩獩楨杮䘠潬牯⁳楷桴漠敮漠⁲潭敲挠慯獴漠⁦牰浥畩汦潯⁲畧牡⁤䄨数⁸汦潯⁲畧牡⁤牯攠畱癩污湥⥴眠瑩⁨楓楬潣敮愠摤瑩癩獥漠⁦敲畱物摥猠慨敤愠⁳数⁲慭畮慦瑣牵牥猠数楣楦慣楴湯ᙳ㄀㸀 가ࠀ楆楮桳湩⁧汆潯獲眠瑩⁨睴牯洠牯⁥潣瑡⁳景瀠敲業浵映潬牯朠慵摲⠠灁硥映潬牯朠慵摲漠⁲煥極慶敬瑮 楷桴匠汩捩湯⁥摡楤楴敶⁳景爠煥極敲⁤桳摡⁥獡瀠牥洠湡晵捡畴敲⁲灳捥晩捩瑡潩獮1>0ų؈刀灥楡獲琠汰獡整⁲景琠楨正敮獳ㄠ′浭琠〲洠湩瀠瑡档獥漠⁦牡慥㈠㔮猠⹱敭整獲愠摮甠摮牥‬楷桴挠浥湥⁴潭瑲牡ㄠ㐺⠠‱散敭瑮㨠㐠映湩⁥慳摮 湩汣摵湩⁧畣瑴湩⁧桴⁥慰捴⁨湩瀠潲数⁲桳灡ⱥ爠歡湩⁧畯⁴潪湩獴愠摮瀠敲慰楲杮愠摮瀠慬瑳牥湩⁧桴⁥畳晲捡⁥景琠敨眠污獬挠浯汰瑥ⱥ椠据畬楤杮搠獩潰慳景爠扵楢桳琠桴⁥畤灭湩⁧牧畯摮‬污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥1.0n1q0€1„0ŵ؈刀灥楡獲琠汰獡整⁲景琠楨正敮獳ㄠ′浭琠〲洠湩瀠瑡档獥漠⁦牡慥㈠㔮猠⹱敭整獲愠摮甠摮牥‬楷桴挠浥湥⁴潭瑲牡ㄠ㐺⠠‱散敭瑮㨠㐠挠慯獲⁥慳摮 湩汣摵湩⁧畣瑴湩⁧桴⁥慰捴⁨湩瀠潲数⁲桳灡ⱥ爠歡湩⁧畯⁴潪湩獴愠摮瀠敲慰楲杮愠摮瀠慬瑳牥湩⁧桴⁥畳晲捡⁥景琠敨眠污獬挠浯汰瑥ⱥ椠据畬楤杮搠獩潰慳景爠扵楢桳琠桴⁥畤灭湩⁧牧畯摮‬污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥1.0n1q0€1†0ȦĈ䘀硩湩⁧档睯桫瑡⁳湩攠楸瑳湩⁧灯湥湩⁧湩汣摵湩⁧浥敢摤湩⁧档睯桫瑡⁳湩映潬牯⁳牯眠污獬挠瑵楴杮洠獡湯祲映牯栠汯晤獡獴‬浥敢摤湩⁧潨摬映獡獴椠散敭瑮挠湯牣瑥⁥汢捯獫漠⁦楳敺ㄠ‵⁸〱砠ㄠ‰浣眠瑩⁨散敭瑮挠湯牣瑥⁥㨱㨳‶ㄨ挠浥湥⁴›″潣牡敳猠湡⁤›‶牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩⥥‬慰湩楴杮琠潷挠慯獴漠⁦灡牰癯摥眠潯⁤牰獥牥慶楴敶琠楳敤⁳景挠潨歷慨獴愠摮洠歡湩⁧潧摯琠敨搠浡条獥琠慷汬⁳湡⁤汦潯獲愠⁳敲畱物摥挠浯汰瑥ⱥ椠据畬楤杮搠獩潰慳景爠扵楢桳琠桴⁥畤灭湩⁧牧畯摮‬污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥䐠潯⁲档睯桫瑡ᡳ㄂؀㐱㈮ㄮȨĈ䘀硩湩⁧档睯桫瑡⁳湩攠楸瑳湩⁧灯湥湩⁧湩汣摵湩⁧浥敢摤湩⁧档睯桫瑡⁳湩映潬牯⁳牯眠污獬挠瑵楴杮洠獡湯祲映牯栠汯晤獡獴‬浥敢摤湩⁧潨摬映獡獴椠散敭瑮挠湯牣瑥⁥汢捯獫漠⁦楳敺ㄠ‵⁸〱砠ㄠ‰浣眠瑩⁨散敭瑮挠湯牣瑥⁥㨱㨳‶ㄨ挠浥湥⁴›″潣牡敳猠湡⁤›‶牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩⥥‬慰湩楴杮琠潷挠慯獴漠⁦灡牰癯摥眠潯⁤牰獥牥慶楴敶琠楳敤⁳景挠潨歷慨獴愠摮洠歡湩⁧潧摯琠敨搠浡条獥琠慷汬⁳湡⁤汦潯獲愠⁳敲畱物摥挠浯汰瑥ⱥ椠据畬楤杮搠獩潰慳景爠扵楢桳琠桴⁥畤灭湩⁧牧畯摮‬污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥圠湩潤⁷档睯桫瑡ᡳ㄂؀㐱㈮㈮ȳĈ䘀硩湩⁧档睯桫瑡⁳湩攠楸瑳湩⁧灯湥湩⁧湩汣摵湩⁧浥敢摤湩⁧档睯桫瑡⁳湩映潬牯⁳牯眠污獬挠瑵楴杮洠獡湯祲映牯栠汯晤獡獴‬浥敢摤湩⁧潨摬映獡獴椠散敭瑮挠湯牣瑥⁥汢捯獫漠⁦楳敺ㄠ‵⁸〱砠ㄠ‰浣眠瑩⁨散敭瑮挠湯牣瑥⁥㨱㨳‶ㄨ挠浥湥⁴›″潣牡敳猠湡⁤›‶牧摡摥猠潴敮愠杧敲慧整㈠‰浭渠浯湩污猠穩⥥‬慰湩楴杮琠潷挠慯獴漠⁦灡牰癯摥眠潯⁤牰獥牥慶楴敶琠楳敤⁳景挠潨歷慨獴愠摮洠歡湩⁧潧摯琠敨搠浡条獥琠慷汬⁳湡⁤汦潯獲愠⁳敲畱物摥挠浯汰瑥ⱥ椠据畬楤杮搠獩潰慳景爠扵楢桳琠桴⁥畤灭湩⁧牧畯摮‬污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥䌠敬敲瑳牯⁹楷摮睯挠潨歷慨獴Ș1㄀⸴⸲ำࠁ楆楸杮挠潨歷慨⁴湩攠楸瑳湩⁧灯湥湩⁧湩戠楲正 䍒⁃慷汬眠瑩⁨慤桳映獡整敮獲䌯敨業慣慦瑳湥牥⁳景愠灰潲牰慩整猠穩⁥㌨渠獯漠慥档瘠牥楴慣敭扭牥漠⁦潤牯挠潨歷慨⁴湡⁤′潮⁳湯攠捡⁨敶瑲捩污洠浥敢⁲景眠湩潤⁷档睯桫瑡⥳‬湩汣摵湩⁧潃瑳漠⁦慤桳映獡整敮獲 档浥捩污映獡整敮⹲10ŝȈ䴀歡湩⁧桴⁥灯湥湩⁧湩戠楲正洠獡湯祲映牯搠潯⽲眠湩潤⽷挠敬敲瑳牯⁹楷摮睯‬湩汣摵湩⁧楤浳湡汴湩⁧湩映潬牯漠⁲慷汬⁳祢挠瑵楴杮洠獡湯祲愠摮洠歡湩⁧潧摯琠敨搠浡条獥琠慷汬ⱳ映潬牯湩⁧湡⁤慪扭⁳潣灭敬整‬潴洠瑡档攠楸瑳湩⁧畳晲捡⁥⽩⁣楤灳獯污漠⁦畭扬⽡爠扵楢桳琠桴⁥敮牡獥⁴畭楮楣慰畤灭湩⁧牧畯摮‬污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥1#0®刀湥睥湩⁧汧獡⁳慰敮ⱳ眠瑩⁨異瑴⁹湡⁤慮汩⁳桷牥癥牥渠捥獥慳祲椠据畬楤杮爠捡楫杮漠瑵琠敨漠摬瀠瑵祴›汆慯⁴汧獡⁳慰敮⁳景渠浯湩污琠楨正敮獳㐠洠眨楥桧⁴潮⁴敬獳琠慨〱杫猯浱ة㐱㔮ㄮ}Ȉ刀湥睥湩⁧汦慯⁴汧獡⁳慰敮⁳景渠浯湩污琠楨正敮獳㐠洠眨楥桧⁴潮⁴敬獳琠慨〱杫猯浱Ⱙ眠瑩⁨潷摯湥映汩敬獴眠敨敲敶⁲敮散獳牡⹹10zȈ刀湥睥湩⁧汦慯⁴汧獡⁳慰敮⁳景渠浯湩污琠楨正敮獳㐠洠眨楥桧⁴潮⁴敬獳琠慨〱杫猯浱 湡⁤敲楦楸杮攠楸瑳湩⁧潷摯湥映汩敬獴.㄀ᨀ ∀ࠁ敒敮楷杮眠潯敤慢瑴湥⁳湩爠潯獦甠楳杮匠污眠潯⁤慢瑴湥ⱳ椠据畬楤杮洠歡湩⁧潧摯琠敨栠汯獥椠慷汬愠摮瀠楡瑮湩⁧楷桴漠汩琠灹⁥潷摯瀠敲敳癲瑡癩⁥景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥潣灭敬整‬湩汣摵湩⁧敲潭慶景爠扵楢桳琠桴⁥畤灭湩⁧牧畯摮‬污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥1 0ʼnȈ刀湥睥湩⁧潷摯湥戠慥獭⠠潮⁴硥散摥湩⁧⸴〰洠瑥敲⁳湩氠湥瑧⥨椠潲景⁳獵湩⁧潈汬捯潷摯戠慥獭‬湩汣摵湩⁧慭楫杮朠潯⁤桴⁥潨敬⁳湩眠污獬愠摮瀠楡瑮湩⁧楷桴漠汩琠灹⁥潷摯瀠敲敳癲瑡癩⁥景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵⁥潣灭敬整‬湩汣摵湩⁧敲潭慶景爠扵楢桳琠桴⁥畤灭湩⁧牧畯摮‬污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥10ÏЈ刀歡湩⁧畯⁴潪湩獴椠楬敭漠⁲散敭瑮洠牯慴⁲湡⁤牰灥牡湩⁧桴⁥畳晲捡⁥潦⁲敲瀭楯瑮湩⁧牯爠灥慬瑳牥湩Ⱨ椠据畬楤杮搠獩潰慳景爠扵楢桳琠桴⁥畤灭湩⁧牧畯摮‬污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥10E1d0–Ȉ倀潲楶楤杮樠楯瑳⁳欨牡楲獥 湩汣摵湩⁧潨獩楴杮‬楦楸杮椠潰楳楴湯愠摮愠灰祬湩⁧潷摯瀠敲敳癲瑡癩⁥湯甠敮灸獯摥猠牵慦散攠捴‮潣灭敬整d

with Hollock wood.10öProviding and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.1.0P
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.1,0Á1÷0>Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)1+0 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm10ÎCleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (iv) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.140ÉDisconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.1=0}
Providing & fixing Indian type (Orissa pattern) White vitreous china water closet squatting pan of size 580x440 mm along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in-charge. 1.0E1Q0Ž1²0åCutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.1 014051N013.23ŒDismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.1013.24oHacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.1013.25
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.1'0N1p013.26¹Repair to existing RCC structure including replacing corroded steel bars and fixing new additional TMT steel bars using welding, drilling, fixing to existing structure etc. as required.+1q0ÍDemolishing cement concrete of 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.130ÍDemolishing cement concrete of 1:4:8 or leaner mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.120¾Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.ÕDemolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.10±Removing mortar from bricks dismantled from brick work in cement mortar and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured)10ßDemolishing stone rubble masonry in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.1 0ÇDismantling doors, windows and clerestory windows (steel or wood) shutters of area 3 sq. metres and below, including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead.110S1i0ÄDismantling doors, windows and clerestory windows (steel or wood) shutters of area beyond 3 sq. metres, including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead.110N1f0’Taking out doors, windows and clerestory window shutters (steel or wood) of area 3 sq. metres and below, including stacking within 50 metres lead.180Q1g0Taking out doors, windows and clerestory window shutters (steel or wood) of area beyond 3 sq. metres, including stacking within 50 metres lead.180L1d0ÏDismantling wood work of sectional area 40 square centimetres and above in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead.10ËDismantling wood work of sectional area below 40 square centimetres in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead.10ˆ
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flatsg115.17.2œDismantling tile work using tiles of thickness 10 mm to 25 mm in floors and roofs, laid in cement mortar, including stacking material within 50 metres lead.10Dismantling G.S. Sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead.10ŒDismantling Asbestos Cement sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead.1)0§Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.10ÿDismantling G.I. pipes above 40 mm nominal bore (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge.10ºDismantling of flushing cistern of all types (C.I /PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.10¥Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.1$0åDismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.1(0öDemolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.1014.23²Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in-charge.1 014.24,
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.10zFencing with G.I. barbed wire, with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used.10S
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in- charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade130ä17
016.70.27
Taking out existing CC interlocking paver blocks from footpath/central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.100h
Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost)14015.06¯
Providing and fixing White Vitreous china Orissa pattern water closet squatting pan of size 580x440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.*1S0­1ó0
1"
0=
1[
0“
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.F1\01Ö0ù1
0!
1?
0uProviding and fixing Orissa pattern white vitreous china water closet squatting pan (Indian type) of size 580x440 mm.1S0iProviding and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.91d0ËProviding and fixing white coloured P.V.C. low level flushing cistern of 10 litre capacity with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.$1[0[Providing and fixing white solid plastic seat with lid for pedestal type W.C. pan complete.160™Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.H1a0•Providing and fixing flat back white vitreous china wash basin of size 630x450mm including making all connections but excluding the cost of fittings.1041>0G1P0•Providing and fixing flat back white vitreous china wash basin of size 550x400mm including making all connections but excluding the cost of fittings.1041>0G1P0•Providing and fixing flat back white vitreous china wash basin of size 450x300mm including making all connections but excluding the cost of fittings.1041>0G1P0˜Providing and fixing Surgeon type white vitreous china wash basin of size 660x460mm including making all connections but excluding the cost of fittings.1!071A0J1S0‹
Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings : Size 450x300x150 mmx117.27.1‹
Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings : Size 600x450x200 mmw117.27.2ÉProviding and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washers complete.130ÊProviding and fixing mirror of superior glass (of approved quality) and of rectangular shape and 453x357 mm size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.10a1k0ËProviding and fixing mirror of superior glass (of approved quality) and of rectangular shape and 1500x450 mm size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.10a1l0ªProviding and fixing PTMT Waste Coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms for wash basin and sink, of approved quality and colour.120ªProviding and fixing PTMT Waste Coupling 38 mm dia of 83 mm length and 77mm breadth weighing not less than 60 gms for wash basin and sink, of approved quality and colour.120
Providing and fixing PTMT Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms, for Wash basin and sink.1%0&1*0
Providing and fixing PTMT Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms, for Wash basin and sink.1+0îProviding and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.1/0ßProviding and fixing PTMT towel ring trapezoidal shape 215 mm long,200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms.1$0
Providing and fixing 450 mm long PTMT towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms, complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.100
Providing and fixing 600 mm long PTMT towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms, complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.10016.25þProviding and fixing UPVC SWR soil, waste and vent pipes conforming to IS:13592 Type-B, jointing with solvent cement including cutting holes in walls and floors wherever required and making good the same as directed by Engineer-in-Charge : 110mm diameter16.26ýProviding and fixing UPVC SWR soil, waste and vent pipes conforming to IS:13592 Type-B, jointing with solvent cement including cutting holes in walls and floors wherever required and making good the same as directed by Engineer-in-Charge : 90mm diameter16.27þ Providing and fixing UPVC SWR soil, waste and vent pipes conforming to IS:13592 Type-B, jointing with solvent cement including cutting holes in walls and floors wherever required and making good the same as directed by Engineer-in-Charge: 75mm diameter16.28üProviding and fixing UPVC SWR soil, waste and vent pipes conforming to IS:13592 Type-B, jointing with solvent cement including cutting holes in walls and floors wherever required and making good the same as directed by Engineer-in-Charge: 63mm diameter16.29üProviding and fixing UPVC SWR soil, waste and vent pipes conforming to IS:13592 Type-B, jointing with solvent cement including cutting holes in walls and floors wherever required and making good the same as directed by Engineer-in-Charge: 50mm diameter16.30üProviding and fixing UPVC SWR soil, waste and vent pipes conforming to IS:13592 Type-B, jointing with solvent cement including cutting holes in walls and floors wherever required and making good the same as directed by Engineer-in-Charge: 40mm diameter16.31
Providing and fixing unplasticized Rigid PVC moulded fittings/accessories conforming to IS:14735 for soil, waste and vent pipes conforming to IS:13592 Type B including jointing with solvent cement, etc. complete as directed by the Engineer-in-Charge UPVC tee with access door : 110mm16.32
Providing and fixing unplasticized Rigid PVC moulded fittings/accessories conforming to IS:14735 for soil, waste and vent pipes conforming to IS:13592 Type B including jointing with solvent cement, etc. complete as directed by the Engineer-in-Charge UPVC tee with access door : 90mm16.33
Providing and fixing unplasticized Rigid PVC moulded fittings/accessories conforming to IS:14735 for soil, waste and vent pipes conforming to IS:13592 Type B including jointing with solvent cement, etc. complete as directed by the Engineer-in-Charge UPVC tee with access door : 75mm16.34
Providing and fixing unplasticized Rigid PVC moulded fittings/accessories conforming to IS:14735 for soil, waste and vent pipes conforming to IS:13592 Type B including jointing with solvent cement, etc. complete as directed by the Engineer-in-Charge UPVC tee with access door : 63mm16.35
Providing and fixing unplasticized Rigid PVC moulded fittings/accessories conforming to IS:14735 for soil, waste and vent pipes conforming to IS:13592 Type B including jointing with solvent cement, etc. complete as directed by the Engineer-in-Charge UPVC tee with access door : 50mm16.36
Providing and fixing unplasticized Rigid PVC moulded fittings/accessories conforming to IS:14735 for soil, waste and vent pipes conforming to IS:13592 Type B including jointing with solvent cement, etc. complete as directed by the Engineer-in-Charge UPVC tee with access door : 40mm16.37/
Providing and fixing unplasticized Rigid PVC moulded fittings/accessories conforming to IS:14735 for soil, waste and vent pipes conforming to IS:13592 Type B including jointing with solvent cement, etc. complete as directed by the Engineer-in-Charge UPVC bend of required degree with access door : 110mm16.38.
Providing and fixing unplasticized Rigid PVC moulded fittings/accessories conforming to IS:14735 for soil, waste and vent pipes conforming to IS:13592 Type B including jointing with solvent cement, etc. complete as directed by the Engineer-in-Charge UPVC bend of required degree with access door : 90mm16.39.
Providing and fixing unplasticized Rigid PVC mo

( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20rnm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 1/0o10ÂConstructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design .with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 100o1€0
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.71V0P
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.!1]0hProviding and fixing C.P. brass bib cock of approved quality conforming to IS:8931 of 15 mm nominal bore1(0šProviding and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms of 15 mm nominal bore120šProviding and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms of 15 mm nominal bore120‰Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 of 15 mm nominal bore150ŒProviding and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 of 15mm nominal bore1+0†Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.100€Providing and fixing PTMT bib cock 15mm nominal bore, 86 mm long, weighing not less than 88 gms, of approved quality and colour.1"061@0ƒProviding and fixing PTMT bib cock 15 mm nominal bore, 165 mm long, weighing not less than 110 gms, of approved quality and colour.1"071B0j2-in-1 PTMT bib cock of 15mm nominal bore having two outlets controlled by two independent control handles10„PTMT bib cock of 15mm nominal bore having outlet compatible with inlet connection pipes used for manual & automatic washing machines1 011@0a1†Providing and fixing PTMT pillar cock 15 mm nominal bore, 107 mm long, weighing not less than 110 gms, of approved quality and colour.1%0:1E0‚Providing and fixing PTMT push cock 15 mm nominal bore, 80 mm long, weighing not less than 46 gms, of approved quality and colour.1$081B0´Providing and fixing 150 mm nominal size square type PTMT grating with openable circular lid of 100 mm diameter (of the inner hinged round grating), of approved quality and colour.1051A0G1f0ÑProviding and fixing PTMT Ball cock 20 mm nominal bore of approved quality, colour and make complete with Epoxy coated 120 mm long aluminium rod with L.P./ H.P.H.D. plastic ball weighing not less than 198 gms.1)0‘1±017.49ÑProviding and fixing PTMT Ball cock 25 mm nominal bore of approved quality, colour and make complete with Epoxy coated 152 mm long aluminium rod with L.P./ H.P.H.D. plastic ball weighing not less than 440 gms.1)0‘1±017.50ÑProviding and fixing PTMT Ball cock 40 mm nominal bore of approved quality, colour and make complete with Epoxy coated 206 mm long aluminium rod with L.P./ H.P.H.D. plastic ball weighing not less than 690 gms.1)0‘1±017.51[Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms1)017.52^Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms1+017.53ŸProviding and fixing unplasticised P.V.C. connection pipe of 15 mm nominal bore and 30cm length with PTMT Nuts, collar and bush of approved quality and colour.190`1017.54ŸProviding and fixing unplasticised P.V.C. connection pipe of 15 mm nominal bore and 45cm length with PTMT Nuts, collar and bush of approved quality and colour.19017.55Providing and fixing PTMT extension nipple of 25mm nominal bore, weighing not less than 62 gms, for water tank pipe, fittings of approved quality and colour.1+017.56yCutting holes up to 30x30 cm in walls with common burnt clay F.P.S. (non modular) bricks, including making good the same.1%017.57,
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.17017.58’Providing and fixing Rectangular type (100 mm nominal size) Stainless Steel grating with openable rectangular lid, of approved quality and colour.<1S017.59XProviding and fixing C.P. brass Health Faucet of approved quality conforming to IS:8931.1-017.60Å
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of 10kgf/cm2 pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124), including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with solvent cement and testing of joints complete as per direction of Engineer in Charge. Exposed on wall : 20mm nominal dia pipes17.61Å
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of 10kgf/cm2 pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124), including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with solvent cement and testing of joints complete as per direction of Engineer in Charge. Exposed on wall : 25mm nominal dia pipes17.62Å
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of 10kgf/cm2 pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124), including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with solvent cement and testing of joints complete as per direction of Engineer in Charge. Exposed on wall : 32mm nominal dia pipes17.63Å
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of 10kgf/cm2 pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124), including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with solvent cement and testing of joints complete as per direction of Engineer in Charge. Exposed on wall : 40mm nominal dia pipes17.64Å
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of 10kgf/cm2 pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124), including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with solvent cement and testing of joints complete as per direction of Engineer in Charge. Exposed on wall : 50mm nominal dia pipes17.65Å
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of 10kgf/cm2 pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124), including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with solvent cement and testing of joints complete as per direction of Engineer in Charge. Exposed on wall : 63mm nominal dia pipes17.66ü
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of 15kgf/cm2 pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124), including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls, etc. 20mm nominal dia pipes17.67ü
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of 15kgf/cm2 pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124), including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls, etc. 25mm nominal dia pipes17.68ü
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of 15kgf/cm2 pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124), including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with solvent cement and testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls, etc. 32mm nominal dia pipes17.69º
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of specified pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124). This includes jointing of pipes & fittings with solvent cement, testing of joints, trenching, refilling, complete as per direction of Engineer in Charge. External work : 10kgf/cm2 Pressure rating : 25mm nominal dia pipes17.70º
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of specified pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124). This includes jointing of pipes & fittings with solvent cement, testing of joints, trenching, refilling, complete as per direction of Engineer in Charge. External work : 10kgf/cm2 Pressure rating : 32mm nominal dia pipes17.71º
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of specified pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124). This includes jointing of pipes & fittings with solvent cement, testing of joints, trenching, refilling, complete as per direction of Engineer in Charge. External work : 10kgf/cm2 Pressure rating : 40mm nominal dia pipes17.72º
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of specified pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124). This includes jointing of pipes & fittings with solvent cement, testing of joints, trenching, refilling, complete as per direction of Engineer in Charge. External work : 10kgf/cm2 Pressure rating : 50mm nominal dia pipes17.73º
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of specified pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124). This includes jointing of pipes & fittings with solvent cement, testing of joints, trenching, refilling, complete as per direction of Engineer in Charge. External work : 10kgf/cm2 Pressure rating : 63mm nominal dia pipes17.74º
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of specified pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124). This includes jointing of pipes & fittings with solvent cement, testing of joints, trenching, refilling, complete as per direction of Engineer in Charge. External work : 10kgf/cm2 Pressure rating : 90mm nominal dia pipes17.75¸
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of specified pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124). This includes jointing of pipes & fittings with solvent cement, testing of joints, trenching, refilling, complete as per direction of Engineer in Charge. External work : 10kgf/cm2 Pressure rating110mm nominal dia pipes17.76¼
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of specified pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124). This includes jointing of pipes & fittings with solvent cement, testing of joints, trenching, refilling, complete as per direction of Engineer in Charge. External work : 12.5kgf/cm2 Pressure rating : 63mm nominal dia pipes17.77¼
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of specified pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124). This includes jointing of pipes & fittings with solvent cement, testing of joints, trenching, refilling, complete as per direction of Engineer in Charge. External work : 12.5kgf/cm2 Pressure rating : 90mm nominal dia pipes17.78½
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes of specified pressure rating for domestic water supply, conforming to IS:4985 including all UPVC plain & brass threaded fittings(as per IS:7834/IS:10124). This includes jointing of pipes & fittings with solvent cement, testing of joints, trenching, refilling, complete as per direction of Engineer in Charge. External work : 12.5kgf/cm2 Pressure rating : 110mm nominal dia pipes17.79Ä
Providing and fixing rigid UPVC pipes of at least 4kgf/cm2 rating as per IS:4985, complete with fittings such as reducers, couplings, adaptors, clamps, etc. including cutting and making good the walls and ceiling for waste pipes, bath wastes, overflow, kitchen equipment, waste connections and condensate drainage including cutting of masonry/RCC walls as required and making good the same as directed by the Engineer-in-Charge : 63mm nominal dia pipes17.80Ä
Providing and fixing rigid UPVC pipes of at least 4kgf/cm2 rating as per IS:4985, complete with fittings such as reducers, couplings, adaptors, clamps, etc. including cutting and making good the walls and ceiling for waste pipes, bath wastes, overflow, kitchen equipment, waste connections and condensate drainage including cutting of masonry/RCC walls as required and making good the same as directed by the Engineer-in-Charge : 50mm nominal dia pipes17.81Ä
Providing and fixing rigid UPVC pipes of at least 4kgf/cm2 rating as per IS:4985, complete with fittings such as reducers, couplings, adaptors, clamps, etc. including cutting and making good the walls and ceiling for waste pipes, bath wastes, overflow, kitchen equipment, waste connections and condensate drainage including cutting of masonry/RCC walls as required and making good the same as directed by the Engineer-in-Charge : 20mm nominal dia pipes17.82Providing and fixing UPVC ball valve of approved quality (screwed end/pasted end as per site requirement) : 20mm UPVC Ball Valve (12.5kg/cm2)17.83‹Providing and fixing UPVC ball valve of approved quality (screwed end/pasted end as per site requirement) : 25mm UPVC Ball Valve (16kg/cm2)17.84‹Providing and fixing UPVC ball valve of approved quality (screwed end/pasted end as per site requirement) : 32mm UPVC Ball Valve (16kg/cm2)17.85‰Providing and fixing UPVC ball valve of approved quality (screwed end/pasted end as per site requirement): 40mm UPVC Ball Valve (6kg/cm2)17.86ŠProviding and fixing UPVC ball valve of approved quality (screwed end/pasted end as per site requirement) : 50mm UPVC Ball Valve (6kg/cm2)17.87ŠProviding and fixing UPVC ball valve of approved quality (screwed end/pasted end as per site requirement) : 63mm UPVC Ball Valve (6kg/cm2)17.88‹Providing and fixing UPVC ball valve of approved quality (screwed end/pasted end as per site requirement) : 90mm UPVC Ball Valve (10kg/cm2)17.89ŒProviding and fixing UPVC ball valve of approved quality (screwed end/pasted end as per site requirement) : 110mm UPVC Ball Valve (10kg/cm2)»
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete, for pipes 100 to 250 mm diameter1(0dConstructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1. cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc, complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5é1ó0tConstructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1. cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc, complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5é1ó0xConstructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1. cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete

敲敳癲潩Ⱳ猠睥条⁥…慷整⁲牴慥浴湥⁴汰湡ⱴ琠湵敮獬⼠猠扵慷⁹湡⁤牢摩敧搠捥瑥⹣‬牰灥牡摥戠⁹業楸杮椠桴⁥慲楴景㔠㨠㈠⠠‵慰瑲⁳湩整牧污挠祲瑳污楬敮猠畬牲⁹›′慰瑲⁳慷整⥲映牯瘠牥楴慣畳晲捡獥愠摮㌠㨠ㄠ⠠″慰瑲⁳湩整牧污挠祲瑳污楬敮猠畬牲⁹›‱慰瑲眠瑡牥 潦⁲潨楲潺瑮污猠牵慦散⁳湡⁤灡汰楹杮琠敨猠浡⁥牦浯渠来瑡癩⁥椨瑮牥慮⥬猠摩⁥楷桴琠敨栠汥⁰景猠湹桴瑥捩映扩牥戠畲桳‮桔⁥慭整楲污猠慨汬洠敥⁴桴⁥敲畱物浥湥獴愠⁳灳捥晩敩⁤湩䄠䥃㈭㈱㌭ⵒ〲〱椠攮戠⁹敲畤楣杮瀠牥敭扡汩瑩⁹景挠湯牣瑥⁥祢洠牯⁥桴湡㤠┰挠浯慰敲⁤楷桴挠湯牴汯挠湯牣瑥⁥獡瀠牥䐠义ㄠ㐰‸湡⁤敲楳瑳湡⁴潴ㄠ‶慢⁲票牤獯慴楴⁣牰獥畳敲漠敮慧楴敶猠摩⹥吠敨挠祲瑳污楬敮猠畬牲⁹桳污敢挠灡扡敬漠⁦敳晬栭慥楬杮漠⁦牣捡獫甠⁰潴愠眠摩桴漠⁦⸰〵浭‮桔⁥潷歲猠慨汬戠⁥慣牲敩⁤畯⁴污潣灭敬整愠⁳数⁲灳捥晩捩瑡潩湡⁤桴⁥楤敲瑣潩景琠敨攠杮湩敥⵲湩挭慨杲⹥吠敨瀠潲畤瑣瀠牥潦浲湡散猠慨汬挠牡祲朠慵慲瑮敥映牯ㄠ‰敹牡⁳条楡獮⁴湡⁹敬歡条⹥120ǿ1ȗ0Н1ч0ɑȈ倀潲楶楤杮☠䄠灰祬湩⁧潰祬敭⁲潭楤楦摥‬汦硥扩敬挠浥湥慴楴畯⁳敮慧楴敶猠摩⁥慷整灲潲景湩⁧潣瑡湩⁧楷桴攠慬瑳捩眠瑡牥牰潯楦杮瀠汯浹牥⁳湯椠瑮牥潩⁲慷汬瀠慬瑳牥猠牵慦散椠桴敲⁥潣瑡⁳ㅀ⸴㔳欠⁧ㄯ‰煳⹭漠敮挠慯⁴景猠汥⁦牰浩湩⁧景挠浥湥慴楴畯⁳慷整灲潲景湩⁧潰祬敭⡲楤畬楴湯眠瑩⁨慷整⁲湩琠敨爠瑡潩漠⁦㨱⤱愠摮琠潷挠慯獴漠⁦散敭瑮瑡潩獵眠瑡牥牰潯楦杮瀠汯浹牥⠠楤畬楴湯眠瑩⁨慷整⁲湩琠敨爠瑡潩漠⁦㨳‱ 晡整⁲捳慲灰湩⁧湡⁤牰灯牥祬挠敬湡湩⁧桴⁥畳晲捡⁥潴爠浥癯⁥牰ⵥ硥獩楴杮瀠楡瑮映汩…潬獯⁥慰瑲捩敬⁳楴汬瀠慬瑳牥椠⁳楶楳汢ⱥ挠浯汰瑥⁥湩愠汬爠獥数瑣愠⁳数⁲桴⁥楤敲瑣潩景䔠杮湩敥⵲湩䌭慨杲⹥1`0ƥȈ倀潲楶楤杮愠摮映硩湩⁧慦瑣牯⁹慭敤瀠敲慣瑳删䍃瀠牥潦慲整⁤牤楡潣敶獲‬慨楶杮挠湯牣瑥⁥景猠牴湥瑧⁨潮⁴敬獳琠慨ⵍ㔲‬景猠穩⁥〱〰㑸〵㕸‰浭‬敲湩潦捲摥眠瑩⁨‸浭搠慩映畯⁲潮⁳潬杮瑩摵湩污☠㤠渠獯挠潲獳猠捥楴湯污吠䴮吮‮潨灯戠牡ⱳ椠据畬楤杮瀠潲楶楤杮㔠‰浭搠慩瀠牥潦慲楴湯⁳⁀〱‰潴ㄠ㔲洠⽣Ᵽ椠据畬楤杮瀠潲楶楤杮攠杤⁥楢摮湩⁧楷桴䴠匮‮汦瑡⁳景猠穩⁥〵洠⁸⸱‶浭挠浯汰瑥ⱥ愠汬愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湩挭慨杲⹥"1E0ͤЈ䌀敬湡湩⁧畳晲捡獥愠摮爠浥癯湩⁧楤瑲‬畤瑳‬楢摲搠潲灰湩Ⱨ朠敲獡ⱥ漠汩‬污慧ⱥ映湵畧ⱳ洠湯敫⁹敢瑡ⱳ瘠来瑥扡敬朠潲瑷⁨瑥⹣‬湩汣摵湩⁧牰癯摩湩Ⱨ愠灰祬湩⁧湡⁤慷桳湩⁧桴⁥畳晲捡⁥楷桴挠敨業慣汣慥楮杮愠敧瑮愠⁳灡牰癯摥戠⁹湅楧敮牥椭⵮档牡敧‬景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵牥‬楷桴琠敨栠汥⁰景爠煥極敲⁤捳畲扢牥⁳湡⁤污潳挠敬湡湩⁧楷桴洠捡楨敮漠数慲整⁤慷整⁲敪⁴業數⁤楷桴搠獥物摥焠慵瑮瑩⁹景映湩⁥楳楬慣眠敨敲敶⁲敲畱物摥‬楷桴畯⁴慣獵湩⁧湡⁹捳慲捴楨杮 慤慭敧琠桴⁥畳晲捡⁥湡⁤楦慮汬⁹慷桳湩⁧桴⁥畳晲捡⁥楷桴挠敬湡眠瑡牥眠瑩⁨桴⁥敨灬漠⁦牰獥畳敲樠瑥洠捡楨敮‬潣灭敬整椠污敲灳捥ⱴ椠据畬楤杮琠歡湩⁧污牰捥畡楴湯⁳潴猠晡来慵摲瘠湥楴慬潴獲‬楷摮睯ⱳ搠潯獲攠捴‮祢猠極慴汢⁥潣敶楲杮猠獡琠癡楯⁤湡⁹慤慭敧琠桴⁥畢汩楤杮猯牴捵畴敲‬污獡瀠牥搠物捥楴湯漠⁦湅楧敮牥‭湩挭慨杲⁥吨敨爠瑡⁥獩椠据畬楳敶漠⁦污慭整楲污⁳…慬潢牵⁳湩潶癬摥攠捸灥⁴捳晡潦摬湩⥧.㄀ሀ 䬀㄁樀、뜀ࠄ牐癯摩湩⁧湡⁤畳灰祬湩⁧灓湡牤汥䜠慬獳倠湡汥⁳潣灭楲楳杮漠⁦‶浭琠楨正栠慥⁴瑳敲杮桴湥摥洠湯汯瑩楨⁣汦慯⁴汧獡⁳景愠灰潲敶⁤潣潬牵愠摮猠慨敤眠瑩⁨敲汦捥楴敶猠景⁴潣瑡湩⁧湯猠牵慦散⌠㈠漠⁦灡牰癯摥挠汯畯⁲湡⁤桳摡⁥潳愠⁳潴洠瑡档琠敨挠汯畯⁲湡⁤桳摡⁥景琠敨䤠啇⁳湩琠敨瘠獩潩慰敮獬攠捴Ⱞ愠汬挠浯汰瑥⁥潦⁲桴⁥敲畱物摥瀠牥潦浲湡散⁳獡猠数楣楦摥‬獡瀠牥琠敨䄠捲楨整瑣牵污搠慲楷杮ⱳ愠⁳数⁲桴⁥灡牰癯摥猠潨⁰牤睡湩獧‬獡猠数楣楦摥‬湡⁤獡搠物捥整⁤祢琠敨䔠杮湩敥⵲椠⵮桃牡敧‮潆⁲慰浹湥ⱴ漠汮⁹桴⁥捡畴污愠敲⁡景朠慬獳漠慦散⌠ㄠ漠⁦桴⁥汧獡⁳灳湡汥⁳戨瑵攠捸畬楤杮琠敨愠敲⁡景朠潲癯獥愠摮眠慥桴牥猠汩捩湯⁥敳污湡⥴瀠潲楶敤⁤湡⁤楦數⁤湩瀠獯瑩潩Ɱ猠慨汬戠⁥敭獡牵摥椠煳⹭⠠慐浹湥⁴潦⁲暠硩湩⁧景匠慰摮敲汇獡⁳慐敮獬椠桴⁥畣瑲楡汧穡湩⁧獩椠据畬敤⁤湩挠獯⁴景爠汥癥湥⁴瑉浥⤪⠮⥩䌠汯畯敲⁤楴瑮摥映潬瑡朠慬獳㘠浭琠楨正猠扵瑳慲整眠瑩⁨敲汦捥楴敶猠景⁴潣瑡湩⁧湯映捡⁥‣ⰲ栠癡湩⁧牰灯牥楴獥愠⁳楶楳汢⁥楌桧⁴牴湡浳瑩慴据⁥嘨呌 景㈠‵潴㌠‵Ⱕ䰠杩瑨爠晥敬瑣潩湩整湲污ㄠ‰潴ㄠ┵‬楬桧⁴敲汦捥楴湯攠瑸牥慮〱琠〲┠‬桳摡湩⁧潣晥楦楣湥⁴〨㈮ⴵ〠㈮⤸愠摮唠瘠污敵漠⁦⸳‰潴㌠㌮圠洯′⁋瑥⹣吠敨瀠潲数瑲敩⁳景瀠牥潦浲湡散朠慬獳猠慨汬戠⁥敤楣敤⁤祢琠捥湨捩污猠湡瑣潩楮杮愠瑵潨楲祴愠⁳数⁲桴⁥楳整爠煥極敲敭瑮ᠮ㄀ⴀ 瘀ࠀ牐癯摩湩⁧湡⁤楦楸杮挠湯散污摥栠湩敧漠⁦灡牰癯摥焠慵楬祴映牯ㄠⴹ〲浭琠楨正搠潯⁲楷桴猠慴湩敬獳猠整汥猠牣睥⁳潣灭敬整㨠1$0ƼȈ䌀楨灰湩⁧景甠獮畯摮眯慥潣据敲整洠瑡牥慩景㜠洵癡牥条⁥桴捩湫獥⁳牦浯猠慬獢‬敢浡ⱳ挠汯浵獮攠捴‮楷桴洠湡慵桃獩汥愠摮 牯戠⁹瑳湡慤摲瀠睯牥搠楲敶数捲獵楳湯琠灹⁥牯漠⁦灡牰癯摥洠歡⁥湩汣摵湩⁧慴数楲杮漠⁦污摥敧ⱳ洠歡湩⁧煳慵敲猠潨汵敤獲漠⁦慣楶楴獥椠据畬楤杮挠敬湡湩⁧桴⁥硥潰敳⁤潣据敲整猠牵慦散愠摮爠楥普牯散敭瑮眠瑩⁨楷敲戠畲桳獥攠捴‮湡⁤楤灳獯污漠⁦敤牢獩映牯愠汬氠慥⁤湡⁤楬瑦⁳污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湉䌭慨杲e㄀䐀 밀ࠁ桃灩楰杮漠⁦湵潳湵⽤敷歡挠湯牣瑥⁥慭整楲污漠⁦〵浭愠敶慲敧琠楨正敮獳映潲汳扡ⱳ戠慥獭‬潣畬湭⁳瑥⹣眠瑩⁨慭畮污䌠楨敳湡⽤漠⁲祢猠慴摮牡⁤潰敷⁲牤癩湥瀠牥畣獳潩祴数漠⁲景愠灰潲敶⁤慭敫椠据畬楤杮琠灡牥湩⁧景愠汬攠杤獥‬慭楫杮猠畱牡⁥桳畯摬牥⁳景挠癡瑩敩⁳湩汣摵湩⁧汣慥楮杮琠敨攠灸獯摥挠湯牣瑥⁥畳晲捡⁥湡⁤敲湩潦捲浥湥⁴楷桴眠物⁥牢獵敨⁳瑥⹣愠摮搠獩潰慳景搠扥楲⁳潦⁲污敬摡愠摮氠晩獴愠汬挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥䤭⵮桃牡敧1D0ƽȈ䌀楨灰湩⁧景甠獮畯摮眯慥潣据敲整洠瑡牥慩景㈠‵浭愠敶慲敧琠楨正敮獳映潲汳扡ⱳ戠慥獭‬潣畬湭⁳瑥⹣眠瑩⁨慭畮污䌠楨敳湡⽤漠⁲祢猠慴摮牡⁤潰敷⁲牤癩湥瀠牥畣獳潩祴数漠⁲景愠灰潲敶⁤慭敫椠据畬楤杮琠灡牥湩⁧景愠汬攠杤獥‬慭楫杮猠畱牡⁥桳畯摬牥⁳景挠癡瑩敩⁳湩汣摵湩⁧汣慥楮杮琠敨攠灸獯摥挠湯牣瑥⁥畳晲捡⁥湡⁤敲湩潦捲浥湥⁴楷桴眠物⁥牢獵敨⁳瑥⹣愠摮搠獩潰慳景搠扥楲⁳潦⁲污敬摡愠摮氠晩獴愠汬挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥䤭⵮桃牡敧1E0ƉȈ䌀敬湡湩⁧景爠楥普牯散敭瑮戠牡⁳灵潴ㄠ′浭搠慩敭整⁲牦浯爠獵⁴牦浯琠敨爠楥普牯楣杮戠牡⁳潴朠癩⁥瑩愠琠瑯污爠獵⁴牦敥猠整汥猠牵慦散戠⁹獵湩⁧污慫楬敮挠敨業慣畲瑳爠浥癯牥漠⁦灡牰癯摥洠歡⁥楷桴瀠楡瑮戠畲桳愠摮爠浥癯湩⁧潬獯⁥慰瑲捩敬⁳晡整⁲㐲栠畯獲漠⁦瑩⁳灡汰捩瑡潩楷桴眠物⁥牢獵⁨湡⁤桴牯畯桧祬眠獡楨杮眠瑩⁨慷整⁲湡⁤污潬楷杮椠⁴潴搠祲‬污潣灭敬整愠⁳数⁲楤敲瑣潩景䔠杮湩敥⵲湉䌭慨杲⹥1*0ƊȈ䌀敬湡湩⁧景爠楥普牯散敭瑮戠牡⁳扡癯⁥㈱洠楤浡瑥牥映潲畲瑳映潲桴⁥敲湩潦捲湩⁧慢獲琠楧敶椠⁴⁡潴慴畲瑳映敲⁥瑳敥畳晲捡⁥祢甠楳杮愠歬污湩⁥档浥捩污爠獵⁴敲潭敶⁲景愠灰潲敶⁤慭敫眠瑩⁨慰湩⁴牢獵⁨湡⁤敲潭楶杮氠潯敳瀠牡楴汣獥愠瑦牥㈠‴潨牵⁳景椠獴愠灰楬慣楴湯眠瑩⁨楷敲戠畲桳愠摮琠潨潲杵汨⁹慷桳湩⁧楷桴眠瑡牥愠摮愠汬睯湩⁧瑩琠牤ⱹ愠汬挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥䤭⵮桃牡敧.㄀⨀ ⬀ࠁ牐癯摩湩Ⱨ洠硩湩⁧湡⁤灡汰楹杮匠剂倠汯浹牥⠠ㅀ┰漠⁦散敭瑮眠楥桧⥴洠摯晩敩⁤散敭瑮瑩潩獵戠湯⁤潣瑡䀠㈠㈮欠⁧散敭瑮瀠牥猠浱漠⁦畳晲捡⁥牡慥洠硩摥眠瑩⁨灳捥晩敩⁤牰灯牯楴湯漠⁦灡牰癯摥瀠汯浹牥漠档灩数⁤潰瑲潩景删䍃愠⁳数⁲灳捥晩捩瑡潩獮愠摮搠物捥楴湯漠⁦湅楧敮牥䤭⵮档牡敧挠浯汰瑥⁥湩愠汬爠獥数瑣Ἦ㄀⨀ 䌀㄀戀 케ࠀ牐癯摩湩Ⱨ洠硩湩⁧湡⁤灡汰楹杮䔠潰祸戠湯楤杮愠桤獥癩⁥慨楶杮挠癯牥条⁥⸲〲猠浱欯⁧景愠灰潲敶⁤慭敫漠档灩数⁤潰瑲潩景删䍃愠⁳数⁲灳捥晩捩瑡潩獮愠摮搠物捥楴湯漠⁦湅楧敮牥䤭⵮档牡敧挠浯汰瑥⁥湩愠汬爠獥数瑣Ἦ㄀㔀 ꠀࠂ牐癯摩湩Ⱨ洠硩湩⁧湡⁤灡汰楹杮匠剂瀠汯浹牥⠠景愠灰潲敶⁤慭敫 潭楤楦摥䌠浥湥⁴潭瑲牡漠⁦㈱洠癡牥条⁥桴捩湫獥⁳湩瀠潲潰瑲潩景ㄠ㐺⠠‱散敭瑮›‴牧摡摥挠慯獲⁥慳摮眠瑩⁨潰祬敭⁲業楮畭┲戠⁹瑷‮景挠浥湥⁴獵摥 獡瀠牥猠数楣楦慣楴湯⁳湡⁤楤敲瑣潩獮漠⁦湅楧敮牥椭⵮档牡敧‮上瑯㩥䴠慥畳敲敭瑮愠摮瀠祡敭瑮›桔⁥牰ⵥ敭獡牵浥湥⁴景琠楨正敮獳猠慨汬戠⁥潤敮樠獵⁴晡整⁲桴⁥畳晲捡⁥牰灥牡瑡潩獩挠浯汰瑥摥愠摮倠祡敭瑮甠摮牥琠楨⁳瑩浥猠慨汬戠⁥慭敤漠汮⁹晡整⁲牰灯牥眠瑥挠牵湩⁧慨⁳敢湥搠湯⁥湡⁤畳晲捡⁥慨⁳敢湥猠瑡獩慦瑣牯汩⁹癥污慵整⁤祢猠畯摮湩⁧ 慴灰湩⁧楷桴愠戠畬瑮洠瑥污椠獮牴浵湥⁴湡⽤牯琠敨㜠洵楳敺挠扵⁥牣獵楨杮猠牴湥瑧⁨瑡琠敨攠摮漠⁦㠲搠祡⁳潴戠⁥潮⁴敬獳琠慨〳丠匯浱㉭⸩1*0>1o0ƧȈ圀瑡牥瀠潲景湩⁧牴慥浴湥⁴景删䍃猠湵桳摡⁥楷桴娠捹獯汩匯歩条牡ⵤ㈷⽗楓潬慸䉗支畱癩污湥⁴牯慧潮楳慬敮猯汩硯湡ⵥ慢敳⁤慷整⁲牰潯楦杮匠汯瑵潩ㄨ氠瑩敲漠⁦祚潣楳⽬煥極慶敬瑮☠㈠‰楬牴獥漠⁦慷整⁲瑳物敲⁤楦獲⁴…′楬牴獥漠⁦祚潣牰浩⽥煥極慶敬瑮愠摤摥愠摮猠楴牲摥⠠潴慴㌲氠瑩敲⥳ 楴汬椠⁴敭瑥⁳桴⁥慳畴慲楴湯氠癥汥愠摮琠獥楴杮愠⁳数⁲䥒䕌⁍牯戠⁹慷整⁲牤灯⁳整瑳椠桷捩⁨慷整⁲牤灯⁳潤渠瑯愠獢牯⁢畢⁴牤灯⁳敲慭湩漠⁲潲汬⹳Y1ƒ0‰Ȉ倀潲楶楤杮☠䄠灰祬湩⁧敷瑡敨⁲牰潯⁦敳污湡⁴㔲浭ㅸ洰湯漠瑵牥樠楯瑮ⱳ漠⁦灡牰癯摥洠歡⁥潣普物業杮琠卉☠搠物捥整⁤祢䔠杮湩敥⵲湩挭慨杲⹥1D0oviding and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made."150|1Ÿ0”Providing and fixing factory made 30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)"1A0a1y0)Providing and fixing factory made 30 mm thick single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)"1A0a1ƒ01
Cutting or drilling on concrete, stones, rocks, tiles or similar type of materials using core cutting machine (wet cutting or dry cutting as per site conditions) of size 50 mm in diameter including clearing of debris and patching the surface wherever required as per the instruction of Engineer-in-charge.¥1»026.500.124.152
Cutting or drilling on concrete, stones, rocks, tiles or similar type of materials using core cutting machine (wet cutting or dry cutting as per site conditions) of size 100 mm in diameter including clearing of debris and patching the surface wherever required as per the instruction of Engineer-in-charge.¥1¼026.500.224.162
Cutting or drilling on concrete, stones, rocks, tiles or similar type of materials using core cutting machine (wet cutting or dry cutting as per site conditions) of size 150 mm in diameter including clearing of debris and patching the surface wherever required as per the instruction of Engineer-in-charge.¥1¼026.500.324.17]
Providing, mixing and applying ready-to-use non-shrink high-performance repair microconcrete (of approved make) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 40 N/Sqmm2).: 12mm average thicknessG124.18]
Providing, mixing and applying ready-to-use non-shrink high-performance repair microconcrete (of approved make) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 40 N/Sqmm2).: 25mm average thicknessG124.19]
Providing, mixing and applying ready-to-use non-shrink high-performance repair microconcrete (of approved make) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 40 N/Sqmm2).: 50mm average thicknessG124.20n
Providing, mixing and applying ready-to-use non-shrink high-performance repair microconcrete (of approved make) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 40 N/Sqmm2).: above 50mm, upto 100m average thicknessG124.21d
Providing, mixing and applying ready-to-use non-shrink high-performance repair microconcrete (of approved make) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 40 N/Sqmm2).: above 100mm average thicknessG19HIRE CHARGES OF PLANTS & MACHINERY (Based on requirement)-Hydraulic Excavator (3D) with driver and fuel0020#Hydraulic Excavator of 1 cum bucketHour0051

metre

MORTAR

Cement mortar 1:4 (1 cement : 4 fine sand).

CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement concrete of grade 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources), excluding the cost of centering and shuttering - All work up to plinth level.

Providing and laying in position cement concrete of grade 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), excluding the cost of centering and shuttering - All work up to plinth level.

Centering and shuttering including strutting, propping etc. and removal of formwork for foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of formwork for retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Extra for laying concrete in or under foul positions.

REINFORCED CEMENT CONCRETE

Centering and shuttering including strutting, propping etc. and removal of formwork for suspended floors, roofs, landings, balconies and access platforms

Centering and shuttering including strutting, propping etc. and removal of formwork for shelves (Cast in situ)

Centering and shuttering including strutting, propping etc. and removal of formwork for lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of formwork for columns, pillars, piers, abutments, posts and struts

Centering and shuttering including strutting, propping etc. and removal of formwork for edges of slabs and breaks in floors and walls under 20 cm wide

metre

MASONRY WORK

Laterite masonry for foundation and basement upto plinth level including all cost of materials, labour charges etc. with available dismantled laterite stone, in cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with available brick in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand)

STONE WORK

Dry rubble masonry in foundation and plinth including levelling up upto plinth level with departmental stone (dismantled stone)

Random rubble masonry with available dismantled hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with cement mortar 1:6 (1 cement : 6 coarse sand)

CLADDING WORK

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

WOOD AND P. V. C. WORK

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

one set

metre

one set

metre

STEEL WORK

Welding by gas or electric plant including transportation of plant at site etc. complete.

FLOORING

ROOFING

metre

metre

Providing and fixing 6 mm thick multipurpose cement fiber board false ceiling tiles (High pressure steam cured, Type-B, Category-III as per IS: 14862 :2000) of approved texture of size 595x595 mm (Everest DuraCeil or equivalent) in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 24x28 mm made out of 0.33 mm (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x28 mm made of 0.33 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to from grid of size 600x600 mm, resting on periphery walls/partitions on a Perimeter wall angle pre-coated steel of size 24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 6 mm thick multipurpose cement fiber board false ceiling tiles of approved texture in the grid, including, cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main "T" runners to be suspended from ceiling using aluminium slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85x30x0.8 mm, spaced at 1200 mm centre to centre along main "T". Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only cement fiber board false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The cement fiber board ceiling tile shall be non-combustible as per B.S. 476 part IV, have 100% humidity resistance and also having thermal conductivity <0.2 W/mK.

FINISHING

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

REPAIRS TO BUILDING

Dismantling and Demolishing

ROAD WORK

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of M-35 grade, 60mm thickness & of required size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as per direction of Engineer-in-Charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of M-30 grade, 80mm thickness & of required size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as per direction of Engineer-in-Charge.

SANITARY INSTALLATIONS

WATER SUPPLY

Providing and fixing unplasticised PVC connection pipe with brass unions of 30 cm length and 20 mm nominal bore

Providing and fixing unplasticised PVC connection pipe with brass unions of 45 cm length and 15 mm nominal bore

Providing and fixing unplasticised PVC connection pipe with brass unions of 45 cm length and 20 mm nominal bore

DRAINAGE

Extra for depth beyond 45 cm of brick masonry chamber of 455x610 mm size, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra for depth beyond 45 cm of brick masonry chamber of 500x700 mm size, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra for depth beyond 45 cm of brick masonry chamber of 600x850 mm size, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

per litre

per litre

ALUMINIUM WORK

WATER PROOFING

Grading roof for water proofing treatment with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Grading roof for water proofing treatment with cement mortar 1:3 (1 cement : 3 coarse sand)

For vertical surface two coats @ 0.70 kg per sqm

For horizontal surface one coat @1.10 kg per sqm.

RAIN WATER HARVESTING & TUBEWELLS

CONSERVATION OF HERITAGE BUILDINGS

STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL

NEW TECHNOLOGIES AND MATERIALS

MANPOWER SUPPLY (Based on requirement)

Mason/Carpenter/Plumber/Fitter/Mistry/Nozzleman (Skilled)

Glazier/Painter/Mate/Bandhani/Bhisti (Semi-skilled)

Beldar/Helper/Coolie/Sewer man (Unskilled)

Please Enable Macros to View BoQ information