Gram Panchayat Bheta Badiya lift water W/S scheme in Distt Almora under JJM

Amount

Ultra Filtration 50 KLD Complete Plant

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:2:4 (1 Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Random rubble masonry laid dry in breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specification clause 702, 704, 1202 & 1203 of MORD specification.

Random rubble masonry laid in 1:6 cement and sand mortar breast walls, retaining walls etc. including supply of all material, labour, T&P and royalties etc. complete as per drawing and technical specification clause 702, 704, 1202 & 1203 of MORD specification.

Supply and installation of Bucket Type Chlorinator of 25 L Capacity.

Clearing jungle including uprooting of rank vegetation, grass etc for clearing the of intake for it's construction.

Supply of all material, labour, T&P etc all complete and provide RCC cross wall 0.75m high at gadhera tapping point for the protection of intake from heavy flood.

Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal of surplus material as per direction of engineer - in - charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying of wire crates 3.00x1.50x1.50 in size with GI wire conforming to IS: 280 & IS:4826 in 150mm x 150mm mesh laid with stone boulders. as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications) GI wire 10 gauge BWG

Hand Packed stone filling in back of wallls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications)

Providing of all materials, carting from Rail head Kathgodam to site of work, laying & jointing of G.I. Medium screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc.) in trenches with its cutting, threading and testing of pipe line etc complete.

Medium Duty (class 'B') 15 mm (For house connection)

Medium Duty (class 'B') 20 mm

Medium Duty (class 'B') 25 mm

Medium Duty (class 'B') 32 mm

Medium Duty (class 'B') 40 mm

Medium Duty (class 'B') 50 mm

Medium Duty (class 'B') 80 mm

Excavation in soil mixed with single boulders etc. requiring the use of special T&P, if any, for pipe line trenches including lift up to 1.5m and lead up to 30m with back filling, watering, ramming of excavated earth in the trenches.

Dismantling of following dia screwed and socketed G.I. Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and stacking them properly within 50 m but excluding the cost of earth work.

Medium Duty (class 'B') 20 mm

Medium Duty (class 'B') 25 mm

Medium Duty (class 'B') 32 mm

Medium Duty (class 'B') 40 mm

Medium Duty (class 'B') 50 mm

Medium Duty (class 'B') 80 mm

Relaying of dismantled G.I.Pipe in true alignment in trenches including supply of all materials,labour,T&P etc. complete.

Medium Duty (class 'B') 20 mm

Medium Duty (class 'B') 25 mm

Medium Duty (class 'B') 32 mm

Medium Duty (class 'B') 40 mm

Medium Duty (class 'B') 50 mm

Medium Duty (class 'B') 80 mm

Supply and fixing of the following fittings including cartage of materials, labour, T & P etc complete but excluding the cost of excavation and chamber. G.M. Wheel valves (Class I) as per IS 778/1971

32 mm dia.

40 mm dia.

50 mm dia.

80 mm dia.

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of ferrule including tapping the main, but excluding the cost of earth work and cost of all materials. (Labour cost only)

Construction stone masonry chamber 60x60x60 cm, inside in 1:4 cement & sand mortar with MS MH cover on top the chamber with proper locking arrangement. Wheel Valve chamber /bulk water meter chamber

Providing and fixing brass ferrule 15mm dia. nominal bore for domestic connections.

Providing and fixing of PTMT bib cock 15 mm dia. nominal bore for domestic connections.

Earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottom, lift up to 1.5 mtr including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind of soil.

Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204.

Testing of all materials used in water supply as per specific IS standards from an ISO 9001-2015&ISO/IEC 17025:2017 accredited laboratory and also having accreditation by National Accreditation Board for Testing and Calibration Laboratories as below. G.I. Pipe for Physical & Chemical properties as per IS:1239 complete per pipe sample required 1mtr.x3pcs.

Supply and fixing of information amd sign with logo of jal jeevan mission Board of work at site

Supply of all materials, labour and T & P etc. and construction of R.C.C. Clear Water Reservoir of following Capacity in K.L. as per type design and drawing including fixing of pipes and fittings. 50.00 KL Capacity

Earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottom, lift up to 1.5 mtr including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind of soil.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Cement Concrete 1:3:6 (1 cement:3 coarse sand :6 graded stone aggregate 20mm nominal size) in top of retaining wall as per direction of Engineer -in-charge including cost of all material,labour and T&P etc. required for proper completion of the work.

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Treatment of soil under existing floors using chemical emulsion @ hole, 300 mm apart including drilling 12 mm diameter holes and pl cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the exist With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.including supply of all material,labour and T&P etc. required for proper completion of the work.

Centering and shuttering i/c strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.

Centering and shuttering including strutting, ropping etc. and removal of form Lintels, beams, plinth beams, girders, bressumers and cantilevers. as directed by Engineer in charge including cost of all materials, labour, T & P etc. required for proper completion of the work.

Centering and shuttering including strutting, ropping etc. and removal of form Lintels, beams, plinth beams, girders, bressumers and cantilevers. as directed by Engineer in charge including cost of all materials, labour, T & P etc. required for proper completion of the work.

Centering and shuttering including strutting, propping etc. and removal ofform for Suspended floors, roofs, landings, balconies and access platform

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500 D or more

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

P/fixing sction window of AF-7 type for window and ventilator panel excluding glass i/c s/o all material, labour t & p complete. require for proper completion of work Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

P/F grills & Railings including supply of all materials, labour , T & P etc. required for proper completion of work. Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

12mm thick cement Plaster in 1:6 (1 cement : 6 fine sand) mortar including supply of all material, labour, T & P etc. required for proper completion of the work.

Supply & fixing of 35 mm thick commercial quality ( non decorative type, core of block board construction with frame of 1st wood and well matched teak 3 ply veneering with vertical grains or and face veneers on both faces of shutters) flush door shutter of I S I mark of approved make and quality including ISI marked Stainless Steel but hinges with necessary screws. including supply of all fitting, materials, labour and T & Petc. required for proper completion of work.

Providing and fixing glass strips in joints of cement floors. 40mm wide and 4mm thick .as directed by Engineer in charge, including cost of all material, labour, T & P etc. required for proper completion of the work.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

20mm thick cement plaster 1:2 ( 1 cement :2 stone dust) plaster in dedo or skirting including supply of all material, labour and T & P etc. required for proper completion of work.

Painting or iron work or wood for new surface with one coat of primer & two coat of synthetic enamel paint ( Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 liter/10 sqm over an under coat of primer applied @ 0.80 liter/10 sqm of approved brand or manufacture ) including cost of all material, labour T & P etc. required for proper completion of the work.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

One priming coat with cement primer and two coat of oil bound washable distemper of approved brand and manufacture to give an even shadeon new work, as directed by Engineer -in-charge ,including cost of all material, labour T & P etc. required for proper completion of the work.

White washing with lime to give an even shade. New work ( three or more coats) as directed by Engineer in charge including supply of all material, labour and T & P etc. required for proper completion of the work.

Supply & fixing Float glass panes 5.5 mm as directed by Engineer in charge including supply of all material, labour and T & P etc. required for proper completion of the work.

Finishing walls with water proofing cement paint of required shade over New work ( Two or more coats applied @ 3.84 kg /10 sqm ) as directed by Engineer in charge, including cost of all material, labour , T & P etc. required for proper completion of the work.

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Providing and fixing Mosquito proof Jalli in Window using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both direction with wire of dia 0.63 mm with 12mm mild steel U-beading.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete : 100x10 mm

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nutsand screws etc. complete 250x16 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angles 40x40x6 mm for diagonal braces

WGPVCPT Point wiring in PVC conduit, with piano type switch: Wiring for light point/ fan point / exhaust fan point/ recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required. complete in all respect .

LPACCPT S/F light plug point piano type accessories : each supplying and fixing metal box of 150mm x75mmx60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 anos socket outlet and 5/6 amps piano type switch, connection painting etc. as required. complete in all respect for plug point.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 A socket outlet

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 A switch

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 6 pin 15/16 A socket outlet

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.15/16 A switch

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

S/F of celling fan with 1200mm sweep having double ball bearing with reputed make (Havells etc) complete in all respect

S/F of 10-15 watt LED bulb complete. Make Havells, HPL,Orient, Anchor

S/F of LED tube with batten suitableb for up to 1x22 watt LED tube lightcomplete including tube etc. on surface complete CAT AAA

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing brass batten/ angle holder including connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A Each

MCBC S/F 'C' series, SP MCB Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commiesiering etc. as required (Single pole)

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. IN Ordinary rock

Cement Concrete 1:3:6 (1 cement:3 coarse sand :6 graded stone aggregate 20mm nominal size) in top of retaining wall as per direction of Engineer -in-charge including cost of all material,labour and T&P etc. required for proper completion of the work.

Providing and fitting of horizontal multi stage causing pump having 340 LPM ,head 210 mtr,with 6 mtr suction head ,with 3 phase induction moter 2900 rpm,415+10% volt I.S.I marked Kirlosker/equivlant make including all cost of grouting of pumpset,earthing arrangement ,carriage of moter at pumphouse,labour ,T&P with proper alingment ,installion and testing at site

providing & laying of m.s pipe 100Ømm with one no.10mm thick flange welding( 1 times inside & 2 times outside) one no. rubber packing and 4.no. nut bolt of requried size after joining of two pipe with two layer of welding both end of pipe with all cutting ,welding,finishing,scaffolding and T&P as requriedat site for complet work

Fabricaton & Fitting of Pannel Frame 12'X4 ' in M.S Angle inside Pump House with fitting of bakellite sheet on panel board.

Providing & Fitting fully Automatic Star Delta Starter with Relay Range17.40 - 24.0 , Ampere (B.C.H make)

Providing & Fitting fully Automatic Star Delta Starter with Relay Range 3.8 - 6.0 , Ampere (B.C.H make)

Providing & FittingT.P. Gear switch 100amp I.S.I marked

Providing & FittingT.P. Gear switch 63amp I.S.I marked

Providing & Fitting L.T Power Capacitor 5 KVAR (I.S.I.Mark)

Providing & Fitting single phase preventor I.S.I marked

Providing & Fitting P.V.C. 3 core Flat Cable 25 Sqmm Finoles/ equivlant

Providing & Fitting P.V.C. 3 core Flat Cable 6 Sqmm. From pannel board to starter & submersible p/setFinoles/ equivlant

Providing & Fitting BUS BAR 200amp, I.S.I marked

Providing & Fitting Porceliene fuse unit 63 amp(kit kat) I.S.I marked

Providing & Fitting Porceliene fuse unit 500amp(kit kat) I.S.I marked

Carriage of electric itme & Electric Wiring of Pump House with Fitting all Items on Pannel Board with sutable P.V.C Copper Wire , Conduit Pipe, , Main Switch ,starter,fuse unit, etc. Complete .

Fabricaton of Durm in system in100mmØ pipe

Fabricaton of Delivery system

Fabricaton of suction system

p/f sluice value 100mmØ kirlosker make

p/f reflex value 100mmØ kirlosker make

P/f Submersible p/set 2.0 H.P, 550 LPM discharge ,10 meter head with suction aggrement 100mm Ø ,with 0ne no. sluice value

Digetal volt meter(0-500)

Digetal Amp meter