SPECIAL REPAR TO BLDG NO T-22 (RATION STORE SHED) AT 48 (I) SUP PL ASC, RAMGARH CANTT

Dismantling old asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge complete all as specified & directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa & minimum AZ @150 gm/Sqm( be coated with hot dip alloy of 55 % aluminium, 43.5% Zinc, 1.5% Silicon and finished with resin coat on both surface @ 150 gm/Sqm of coating both surfaces) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa & minimum AZ @150 gm/Sqm( be coated with hot dip alloy of 55 % aluminium, 43.5% Zinc, 1.5% Silicon and finished with resin coat on both surface @ 150 gm/Sqm of coating both surfaces) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

Taking down cement plaster of brick or stone masonry etc including raking out joints,hacking for key & scrubbing down with water etc & removal of rubbish out off from site etc complete all as specified and directed.

M&L for rendering 15 mm thick on brick masonry/concrete surface etc in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick cement plastering on fair face of brick masonry/concrete surface etc in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of distemper oil emulsion (OBD) over a coat of 1mm thick putty complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper(OBD) over a coat of primer and a layer of wall care putty (not less than 2.0 mm thick) complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls/chajjas/lintel and applying two coats of cement base paint (white or tinted), complete all as specified & directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed.