Solar

Design, supply, installation, testing and comissioning of roof top solar photovolatic power plant (On Grid) on roof top of existing bldg of capacity 60KW, tiltable type and power evacuation at 415V 3 phase system all as per guidelines/norms issued by MNRE & Indian Metrological Deptt, approved solar radiation data viz Direct Normal Irradiance, Global Horizontal Irradiance complete. Note: All Technical Details are given in ATC

M&L for module mounting structure fabricated from pre-coated aluminium section of suitable size with specified tilt angle according to site requirement & optimum angle to achieve maximum benefit of solar energy and suitable to withstand 150 Kmph wind speed all as per approved design parameters ad as per MNRE standards and to match with existing site conditions. Note: Rates should be inclusive of all accessories, roof treatement if any required at site.

M&L for earthing for lightning protection for SPV modules etc as per IE rules, MNRE guide line & BIS all as per approved plan complete with galvanized earth plate electrode 600X600X6mm thick buried directly in ground vertically (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to and including GI strip 32X6mm size protected with 40mm grade GI pipe. Note: Rate should be inclusive of excavation, returning, filling and complete PCC work as required at site.