REPAIRS, PAINTING AND POLISHING TO CERTAIN FURNITURES AT ALONG MIL STN UNDER GE 872 EWS

Amount

S&F Mild Steel Lock with Duplicate Key of size 40mm, 6 Lever (as approved) for Almirah Large Steel (Drawing No. FD-1031)/Almirah Medium Steel (Drawing No. FD-1032) including Taking out/down unserviceable Lock, complete all as shown in Drawing/specified and as directed.

S&F Mild Steel Handle, Chromium plated (as approved) for Almirah Large Steel (Drawing No. FD-1031)/ Almirah Medium Steel Drawing No. FD-1032), including Taking out/down unserviceable Handle, complete all as shown in Drawing/specified and as directed.

M&L Corner Cleat made out from Mild Steel Sheet 3.0mm thick for Shelves of Almirah Large Steel (Drawing No. FD-1031)/ Almirah Medium Steel Drawing No. FD-1032), and applying Two Coats of Synthetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer to match the Existing Surface including Taking out/down unserviceable Cleat, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Long Rail for Bed Hard Ply Top (Drawing No. FD-246, FD-247) made to Shape/Size and Polishing to match with Existing Surfaces including Taking out/down unserviceable Long Rail from Bed Hard Ply Top, complete all as shown in Drawing/ specified and as directed.

S&F Plywood Top for Bed Hard Ply Top (Drawing No. FD-246, FD-247) 12mm thick, 7 Ply of size 1980x910mm, BWR Grade, Type BB, confirming to IS:303, Commercial facing on Both Sides for Bed Hard Ply Top (Drawing No. FD-246, FD-247) including Taking out/down unserviceable Plywood Top from Bed Hard Ply Top, complete all as shown in Drawing/specified and as directed.

M&L Plywood Top for Charpoy IP Hard Top (Drawing No. FD-MAP-II/01) of size 1980x910mm, 12mm thick, 7 Ply BB Grade, conforming to IS:303, Commercial Face on Both Sides including Taking out/down unserviceable Plywood Top from Charpoy IP Hard Top, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Leg for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Leg from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Leg for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Leg from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Rail for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Rail from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Rail for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Rail from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Side Rail from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Stiffner for Chair Dining (Drawing No. FD-279), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Stiffner from Chair Dining, complete all as shown in Drawing/specified and as directed.

M&L Canning to Chair Dining (Drawing No. FD-279) with Best quality, Half Round, White Plastic Cane 2.5mm Wide and 3.0mm Wide at Border including Removing worn out Canning from Chair Dining, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Leg for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Leg from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Leg for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Leg from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Rail for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Rail from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Rail for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Rail from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Side Rail from Chair Easy, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Handle for Chair Easy (Drawing No. FD-229), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Handle from Chair Easy, complete all as shown in Drawing/ specified and as directed.

M&L Canning to Chair Easy (Drawing No. FD-229) with Best quality, Half Round, White Plastic Cane 2.5mm Wide and 3.0mm Wide at Border including Removing worn out Canning from Chair Easy, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Leg for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Leg from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Leg for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Leg from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Front Rail for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Front Rail from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Rear Rail for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Rail from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Rear Side from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Stiffner for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Stiffner from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Handle for Chair Writing (Drawing No. FD-280), made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Handle from Chair Writing, complete all as shown in Drawing/specified and as directed.

M&L Canning to Chair Writing (Drawing No. FD-280) with Best quality, Half Round, White Plastic Cane 2.5mm Wide and 3.0mm Wide at Border including Removing worn out Canning from Chair Easy, complete all as shown in Drawing/ specified and as directed.

M&L Second Class Hardwood (well seasoned) Leg for Table Dining 6 Pers (Drawing No. FD-273) made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Leg from Table Dining 6 Pers, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail Short for Table Dining 6 Pers (Drawing No. FD-273) made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Side Rail Short from Table Dining 6 Pers, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Side Rail Long for Table Dining 6 Pers (Drawing No. FD-273) made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Side Rail Long from Table Dining 6 Pers, complete all as shown in Drawing/specified and as directed.

M&L Second Class Hardwood (well seasoned) Corner Cleat to Support Corner Portion of Table Dining 6 Pers (Drawing No. FD-273) for fixing Side Rail, made to Shape/Size and applying Two or More Coats of French Polishing to match with Existing Surfaces including Taking out/down carefully unserviceable Corner Cleat from Table Dining 6 Pers, complete all as shown in Drawing/ specified and as directed.

M&L Plywood Top for Table Dining 6 Pers (Drawing No. FD-273) 19mm thick, 11 Ply, BWR Grade, Type AA, confirming to IS:303-1989, pasted Decorative Laminate Sheet (HPL) 1.5mm thick on Top of Plywood Top (Exposed Face) and the Other Side White Balancing including providing 6.0mm thick Teak Wood Beading on All Edges of Table Dining 6 Pers including Taking out/down carefully unserviceable Particle Board Top from Table Dining 6 Pers, complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Chair Dining (Drawing No. FD-279), complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Chair Easy (Drawing No. FD-229), complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Chair Writing (Drawing No. FD-280), complete all as shown in Drawing/specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Sofa Set 4 Seater (Drawing No. FD-373), complete all as shown in Drawing/ specified and as directed.

M&L Preparing/Cleaning Old Treated Surfaces with Sand Papers, Removing dirt's, etc. and applying One Coat of French Polish to Inside & Outside Portion of Table Dining 6 Pers (Drawing No. FD-273), complete all as shown in Drawing/ specified and as directed.

MAZUMDAR ENTERPRISE

M/S A K BROTHERS