REPAIRS TO BOUNDARY WALL, GATE AND PERIODICAL SERVICES TO BOUNDARY WALL AND REPAIRS TO CHAIN LINK FENCING DRAIN AND MISC B/R WORK UNDER DHQ 3 NEW MANGALORE UNDER GE(I)(CG) GOA

Amount

SCH A PART-I [REPAIRS TO BOUNDARY WALL, GATE AND PERIODICAL SERVICES TO BOUNDARY WALL] Taking down cement plaster, any description, including raking out joints hacking for keys scrubbing down with water etc complete all as specified and directed. [Total Quantity = 270.00 (Sch A Part-I) + 300.00 (Sch A Part-II) = 570.00Sqm]

M & L rendering 15mm thick in Cement mortar 1:4 on fair faces of brickwork or concrete surfaces is to be finished even and smooth without using extra cement complete all as specified and directed. [Total Quantity = 270.00 (Sch A Part-I) + 300.00 (Sch A Part-II) = 570.00Sqm]

M & L Preparation of new plastered surfaces and applying 2 coats of cement base paint over and including one coat of primer complete all as specified and directed.

M & L Preparing old surface of wall and applying one coat of cement base paint complete all as specified and directed.

M & L Preparing old surface of wall and applying two coats of cement base paint complete all as specified and directed.

M & L Preparing old surface of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying one coat of arcylic exterior emulsion antifungal paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. [Total Quantity = 33.30 (Sch A Part-I) + 6.00 (Sch A Part-II) = 39.30 Per Quintal]

Dismantling structural steel work including doors, gates but excluding framed truss complete all as specified and directed.

S & F concertina coil of 600mm outer dia made out of 2.60mm dia spring steel wire 230gm /Sqm dipped with corrosion preventive fluid (rusilo 901) of castrol make including white colour, each coil having min 50 turns (circles) and an average weight not less than 8.57 kg including handle and spike at both ends of coil errected in position on top of mild steel angle by fixing with Mild steel rod for securing including necessary welding/clipping to Mild steel sections etc complete all as specified and directed.

S & F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed. [Note:- Each line wire to be measured]

S & F Joist, Channel, angle, or tee sections fixed independently, as in `Y' section/swan neck etc without connecting plates, etc.(cut to ordinary lengths i.e within 20mm of the length indicated) grade Fe-410(Gde E-250) complete all as specified and directed.

S & F Mild steel Framed work as in doors or gates of angle or other sections with gusset plates rails etc complete drilled for fixing or steel sheeting or other than covering, doors etc complete all as specified and directed.

M & L Preparing old treated steel surface of any description over 10cm width or girth and applying one coat of Synthetic enamel paint, complete all as specified and directed. [Total Quantity = 150.00 (Sch A Part-I) + 135.00 (Sch A Part-II) = 285.00 Sqm]

M & L Preparing new steel surface of any description over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of zinc chrome red oxide primer, complete all as specified and directed. [Total Quantity = 100.00 (Sch A Part-I) + 40.00 (Sch A Part-II) = 140.00Sqm]

Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L Plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregates as in coping over masonry including necessary formwork complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. [Total Quantity = 25.00 (Sch A Part-I) + 50.00 (Sch A Part-II) = 75.00 Cum]

M & L Dressed laterite stone masonry, well bonded, bedded and solidly hearted built in Cement mortar 1:4 complete all as specified and directed. [Total Quantity = 10.00 (Sch A Part-I) + 50.00 (Sch A Part-II) = 60.00 Cum]

M & L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement mortar 1:4 complete all as specified and directed.

All as per item No. 19.00 above but except stone complete all as specified and directed.

M & L Raised pointing to random or polygonal rubble, uncoursed or brought upto course in cement mortar 1:3 complete all as specified and directed.

Demolition of Stone slabs and tiles laid bedded and pointed of any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, with and including 20 mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

SCH A PART-II [REPAIRS TO CHAIN LINK FENCING DRAIN AND MISC B/R WORK UNDER DHQ 3 ] M & L Preparation of new plaster surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below are above the ground level) complete all as specified and directed.

M & L Plain cement concrete 1:3:6 type B1 using 40mm graded stone aggregate the cement concrete in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Dismantling reinforced cement concrete of any description and any position (reinforcement cut to facilitate dismantling) complete all as specified and directed.

M & L Precast Reinforced cement concrete of grade (1:2:4) type B1 using 20mm graded stone aggregate as in man hole cover slabs etc set in cement mortar (1:4) including use and waste of form work (reinforcement shall be measured and paid for relevant item) complete all as specified and directed.

M & L TMT bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia complete all as specified and directed.

M & L 100mm thick Cement concrete type B- 2, 1:2:4 (using 40mm graded stone aggregate) as in hard standing etc complete all as specified and directed.

M & L 75mm thick Plain cement concrete 1:3:6 Mix type C2 as in plinth protection and in path surface to be finished without using extra cement complete all as specified and directed.

S & F for Steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade st 240 complete all as specified and directed.

S & F Joist, channel, angle, or tee sections fixed independently, as in `Y' section/swan neck etc without connecting plates, etc (cut to ordinary lengths i.e within 20mm of the length indicated) grade Fe-410 (Gde E-250) complete all as specified and directed.

Excavation in post holes in hard/dense soil each n exc 0.50cum getting out,returning in and ramming earth or broken rubble mixed with earth around in layer not exc 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M & L Plain Cement Concrete Type B2 1:2:4 (using 40mm graded stone aggregate) in post holes, including use and waste of form work complete all as specified and directed.

Dismantling of Plain or corrugated sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

M & L Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply only Mild steel galvanized fencing including, any size or type complete all as specified and directed.

M & L angle iron posts or struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc complete all as specified and directed.

M & L Plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate including formwork for coping/haunching, weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Demolition of Stone slabs and tiles laid bedded and pointed of any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and directed.

M & L 100mm thick Plain cement concrete type D2 1:4:8 (using 40mm graded aggregate) as sub base to flooring complete all as specified and directed.

M & L Sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed.

M & L Plain cement concrete of grade 1:2:4 type B1 using 20mm graded stone aggregate including formwork for coping/haunching, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L 16 to 18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/slabs and like laid overn cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite half round on exposed projected surfaces complete all as specified and directed.

M & L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.

NAVREET CONSTRUCTION

KDR CONSTRUCTION

RS ENTERPRISES