Loading…
Loading…
Tender Value
₹2.3 Cr
EMD Value
₹4.5 L
Closing Date
30 Jun 2026, 3:00 pm5d left
Similar tender results from the same govt authority in the past 3 years.
Design, Supply, Erection, Testing & Commissioning of 25 KV AC single phase OHE for the work of "Y connection at Garhi Harsaru to avoid reversal at Garhi Harsaru (2.5 Km) of Northern Railway ".
17-ElectDYCEECCSBTRD169
17-ElectDYCEECCSBTRD169
Open
12 Months
Gurugram, Haryana
₹0
₹4.5 L
8 Jun 2026
8 Jun 2026
16 Jun 2026
1A-SCHEDULE-1F-SECTION-6(NS ITEMS) 1209547.00 Below/P
1(a) Preparation of designs and drawings for overhead equipment and verification of purchasers pegging plan. Erection
8(a)(xii) Marking/paintig of temperature & Y - Measurement of OHE mast at BWA locations Erection
8(b)(i) Supply without insulator and erection of material for termination of Single conductor of Over head equipment or terminating wire. Supply
8(b)(i) Supply without insulator and erection of material for termination of Single conductor of Over head equipment or terminating wire. Erection
8(b)(iii) Supply without Insulator and erection of material for termination of all aluminium 25KV Feeder / return conductor (Single SPIDER) Supply
8(b)(iii) Supply without Insulator and erection of material for termination of all aluminium 25KV Feeder / return conductor (Single SPIDER) Erection
8(b)(ix)Supply without insulator and erection of materials for termination of copper cross feeder with gantries. Supply
8(b)(ix)Supply without insulator and erection of materials for termination of copper cross feeder with gantries. Erection
9(dz) Supply without insulator and erection of anti-creep with Cadmium copper catenary wire in polluted area Supply
9(dz) Supply without insulator and erection of anti-creep with Cadmium copper catenary wire in polluted area Erection
11(a)(i) Supply without Insulator and erection of cut-in(9Tonne) Insulator Supply
11(a)(i) Supply without Insulator and erection of cut-in(9Tonne) Insulator Erection
11(a)(ii) Supply without Insulator and erection of a suspension (9Tonne) Insulator Supply
11(a)(ii) Supply without Insulator and erection of a suspension (9Tonne) Insulator Erection
11(b) Supply without Insulator and erection of 25 KV Post Insulator Supply
11(b) Supply without Insulator and erection of 25 KV Post Insulator Erection
17(b) Extra for special embedment of earth electrode. Erection
28 Supply without Insulator & erection of 25 kV D.O. fuse switch. Supply
28 Supply without Insulator & erection of 25 kV D.O. fuse switch. Erection
31(a) Transfer of equipment from one mast or support to another. Erection
31(b)Provision of an additional bracket assembly/ assemblies on a mast or support. Erection
31(d)Dismantling of overhead equipment. Erection
31(e)Dismantling of Feeder/ Return Conductor Erection
31(f)Splicing & extension of an anchored overhead equipment. Erection
31(gz)Dismantling of a Section Insulator Assembly Erection
31(h)Slewing and putting back of OHE in original shape Erection
31(i)Dismantling of an Isolator Erection
31(j)Dismantling of a Post/ Pedestal Insulator. Erection
36 (a) Unloading of all type of Steel Structures. Erection
36 (b)Loading of all type of Steel Structures. Erection
37 (a)Unloading of all type of Copper & Aluminium conductors. Erection
37 (b)Loading of all type of Copper & Aluminium conductors. Erection
32(a) Extra on erection rates (Items of sub-section - I) for work under a power block 33 @ 100% (As per Annexure A in FORM-5 of attached tender document)(description of power block items (As below) given in SECTION-1 (GENERAL) of FORM-5 of attached tender document) 8(b) (i)Erection of material for termination of Single conductor of Over head equipment or terminating wire.
32(a) Extra on erection rates (Items of sub-section - I) for work under a power block 34 @ 100% (As per Annexure A in FORM-5 of attached tender document)(description of power block items (As below) given in SECTION-1 (GENERAL) of FORM-5 of attached tender document) 8(b) (ix) Erection of materials for termination of copper cross feeder with gantries.
32(a) Extra on erection rates (Items of sub-section - I) for work under a power block 35 @ 100% (As per Annexure A in FORM-5 of attached tender document)(description of power block items (As below) given in SECTION-1 (GENERAL) of FORM-5 of attached tender document) 9(dz) Erection of anti-creep with Cadmium copper catenary wire in polluted area
32(a) Extra on erection rates (Items of sub-section - I) for work under a power block 36 @ 100% (As per Annexure A in FORM-5 of attached tender document)(description of power block items (As below) given in SECTION-1 (GENERAL) of FORM-5 of attached tender document) 11(a)(i) Erection of cut-in(9Tonne) Insulator
32(a) Extra on erection rates (Items of sub-section - I) for work under a power block 37 @ 100% (As per Annexure A in FORM-5 of attached tender document)(description of power block items (As below) given in SECTION-1 (GENERAL) of FORM-5 of attached tender document) 11(b)Erection of 25 KV Post Insulator
32(a) Extra on erection rates (Items of sub-section - I) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document)(description of power block items (As below) given in SECTION-1 (GENERAL) of FORM-5 of attached tender document) 28 Erection of 25 kV D.O. fuse switch.
32(a) Extra on erection rates (Items of sub-section - I) for work under a power block 39 @ 100% (As per Annexure A in FORM-5 of attached tender document)(description of power block items (As below) given in SECTION-1 (GENERAL) of FORM-5 of attached tender document) 31(a)Transfer of equipment from one mast or support to another.
32(a) Extra on erection rates (Items of sub-section - I) for work under a power block 40 @ 100% (As per Annexure A in FORM-5 of attached tender document)(description of power block items (As below) given in SECTION-1 (GENERAL) of FORM-5 of attached tender document) 31(f) Splicing & extension of an anchored overhead equipment.
32(a) Extra on erection rates (Items of sub-section - I) for work under a power block 41 @ 100% (As per Annexure A in FORM-5 of attached tender document)(description of power block items (As below) given in SECTION-1 (GENERAL) of FORM-5 of attached tender document) 31(gz) Dismantling of a Section Insulator Assembly
32(a) Extra on erection rates (Items of sub-section - I) for work under a power block 42 @ 100% (As per Annexure A in FORM-5 of attached tender document)(description of power block items (As below) given in SECTION-1 (GENERAL) of FORM-5 of attached tender document) 31(h) Slewing and putting back of OHE in original shape
32(a) Extra on erection rates (Items of sub-section - I) for work under a power block 43 @ 100% (As per Annexure A in FORM-5 of attached tender document)(description of power block items (As below) given in SECTION-1 (GENERAL) of FORM-5 of attached tender document) 31(i)Dismantling of an Isolator Above/
2(a)(i)Concrete for foundation and plinth in hard soil Supply
2(a)(i)Concrete for foundation and plinth in hard soil Erection
2(b)In other than hard soil and rock Supply
2(b)In other than hard soil and rock Erection
2(c)Reinforced concrete Supply
2(c)Reinforced concrete Erection
34(g)(i)Earth work, excavation for foundation in normal soil Erection
34(g)(ii)Earth work, excavation for foundation in hard soil Erection Above/
3(b)(i) Supply and erection of fabricated and galvanised structures (O,N & R type portals) with necessary components other than masts. Supply
3(b)(i) Supply and erection of fabricated and galvanised structures (O,N & R type portals) with necessary components other than masts. Erection
3(b)(ii)Supply and erection of Structure steel(traction masts) fabricated and galvanised Type : B-Series Mast Supply
3(b)(ii)Supply and erection of Structure steel(traction masts) fabricated and galvanised Type : B-Series Mast Erection
3(b)(iii)Supply & Erection of special fabricated and galvanised steel structures other than Portals & traction- Masts not covered under items 3(b)(i) &3(b)(ii) Supply
3(b)(iii)Supply & Erection of special fabricated and galvanised steel structures other than Portals & traction- Masts not covered under items 3(b)(i) &3(b)(ii) Erection
3(c)Supply only of fabricated steel other than masts Supply
3(e)(i)Supply and erection of a Guy Rod Assembly Supply
3(e)(i)Supply and erection of a Guy Rod Assembly Erection
3(i)Supply and erection of 25KV Caution Boards including staff caution Board Supply
3(i)Supply and erection of 25KV Caution Boards including staff caution Board Erection
4(a)(i)Supply without insulator and erection of Single bracket assembly. Supply
4(a)(i)Supply without insulator and erection of Single bracket assembly. Erection
4(a)(ii)Extra on 4 (a)(i) for supporting two OHEs. Supply
4(a)(ii)Extra on 4 (a)(i) for supporting two OHEs. Erection
4(b)(i)Supply without Insulator and erection of a pull off arrangement for one OHE. Supply
4(b)(i)Supply without Insulator and erection of a pull off arrangement for one OHE. Erection
4(b)(ii)Extra for each additional equipment pulled including supply Supply
4(b)(ii)Extra for each additional equipment pulled including supply Erection
8(a)(v)Supply and erection of Regulating Equipment (3-Pulley type) with counter weight assembly for conventional/ composite OHE. Supply
8(a)(v)Supply and erection of Regulating Equipment (3-Pulley type) with counter weight assembly for conventional/ composite OHE. Erection
8(b)(ii) Supply without Insulator and erection of materials for termination of Double overhead equipment conductor. Supply
8(b)(ii) Supply without Insulator and erection of materials for termination of Double overhead equipment conductor. Erection
13(e)Extra on item 13(a), (b) or (c) for an inter-locking device Supply
13(e)Extra on item 13(a), (b) or (c) for an inter-locking device Erection
16(a)(i) Supply and erection of a structure bond. Supply
16(a)(i) Supply and erection of a structure bond. Erection
16(b)Supply and erection of a longitudinal bond Supply
16(b)Supply and erection of a longitudinal bond Erection
16(c) Supply & erection of a transverse and special bond. Supply
16(c) Supply & erection of a transverse and special bond. Erection
17(a) Supply & erection of a single earth electrode. Supply
17(a) Supply & erection of a single earth electrode. Erection
17(c)Supply and erection of earth bus Supply
17(c)Supply and erection of earth bus Erection
33(b)Extra on erection rates for steel work manually under item 3(a)(i), 3(a)(ii), 3(b) 36 (i),3(b)(ii) &3(b)(iii) @ 50%.(As per Annexure B in FORM-5 of attached tender document 3(b) (iii)Erection of special fabricated and galvanised steel structures other than Portals & traction- Masts not covered under items 3(b)(i) &3(b)(ii)
32(b)Extra on erection rates (Items of sub-section - III) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document 3(b)(ii)Erection of Structure steel(traction masts) fabricated and galvanised Type : B-Series Mast
32(b)Extra on erection rates (Items of sub-section - III) for work under a power block 38 @ 100% (As per Annexure A in FORM-5 of attached tender document 3(b)(iii)Erection of special fabricated and galvanised steel structures other than Portals & traction- Masts not covered under items 3(b)(i) &3(b)(ii)
32(b)Extra on erection rates (Items of sub-section - III) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document 3(e)(i)Erection of a Guy Rod Assembly
32(b)Extra on erection rates (Items of sub-section - III) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document 3(i)Erection of 25KV Caution Boards including staff caution Board
32(b)Extra on erection rates (Items of sub-section - III) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document 4(a)(i)Erection of Single bracket assembly.
32(b)Extra on erection rates (Items of sub-section - III) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document 8(a)(v)Erection of Regulating Equipment (3-Pulley type) with counter weight assembly for conventional / composite OHE.
32(b)Extra on erection rates (Items of sub-section - III) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document 8(b)(ii)Erection of materials for termination of Double overhead equipment conductor.
33(b)Extra on erection rates for steel work manually under item 3(a)(i), 3(a)(ii), 3(b) 44 (i),3(b)(ii) &3(b)(iii) @ 50%.(As per Annexure B in FORM-5 of attached tender document 3(b) (i)Erection of fabricated and galvanised structures (O,N & R type portals) with necessary components other than masts.
33(b)Extra on erection rates for steel work manually under item 3(a)(i), 3(a)(ii), 3(b) (i),3(b)(ii) &3(b)(iii) @ 50%.(As per Annexure B in FORM-5 of attached tender document 3(b) (ii)Erection of Structure steel(traction masts) fabricated and galvanised Type : B-Series Mast
32(b)Extra on erection rates (Items of sub-section - III) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document 3(b)(i)erection of fabricated and galvanised structures (O,N & R type portals) with necessary components other than masts. Above/
5(az)(ii)Supply & Erection of span wire Supply
5(az)(ii)Supply & Erection of span wire Erection
6(az)Supply and erection of Over Head equipment only Supply
6(az)Supply and erection of Over Head equipment only Erection
6(bz)Supply & Erection of contact wire only Supply
6(bz)Supply & Erection of contact wire only Erection
7(d)Supply and Manual Erection of all aluminium 25KV Feeder/ Return conductor (Single Spider) Supply
7(d)Supply and Manual Erection of all aluminium 25KV Feeder/ Return conductor (Single Spider) Erection
7(e)Supply and Erection of copper cross feeder wires (37/2.25 mm HDBC) across the track at SP/SSP/FP/BT locations Supply
7(e)Supply and Erection of copper cross feeder wires (37/2.25 mm HDBC) across the track at SP/SSP/FP/BT locations Erection
10(az)Extra on item 6(az) for supply and erection of additional fittings at a turn-out, diamond crossing or overlap Supply
10(az)Extra on item 6(az) for supply and erection of additional fittings at a turn-out, diamond crossing or overlap Erection
12(az)Supply without Insulator & erection of a section insulator assembly Supply
12(az)Supply without Insulator & erection of a section insulator assembly Erection
13(a)Supply without Insulator and erection of a 25 KV single pole isolator without earth contact assembly. Supply
13(a)Supply without Insulator and erection of a 25 KV single pole isolator without earth contact assembly. Erection
15(a)(i)upply & erection of large copper jumpers Supply
15(a)(i)upply & erection of large copper jumpers Erection
15(a)(ii) Supply & erection of small copper jumpers Supply
15(a)(ii) Supply & erection of small copper jumpers Erection
15(az)(iii) Supply & erection of copper jumpers Supply
15(az)(iii) Supply & erection of copper jumpers Erection
15(a)(iv)Supply & erection of a copper jumper for drop out fuse switch Supply
15(a)(iv)Supply & erection of a copper jumper for drop out fuse switch Erection
15(b)Supply and erection of an aluminum jumper. Supply
15(b)Supply and erection of an aluminum jumper. Erection
15(d)Supply of materials and erection of Large copper jumper 160 Sq. mm between Aluminium bus and cross feeders Supply
15(d)Supply of materials and erection of Large copper jumper 160 Sq. mm between Aluminium bus and cross feeders Erection
15(e)Supply of materials and erection of Large copper jumper 160 Sq. mm between cross feeder and OHE Supply
15(e)Supply of materials and erection of Large copper jumper 160 Sq. mm between cross feeder and OHE Erection
26(a) (ii) Supply & erection of Solid copper bus-bars 18mm.: Supply
26(a) (ii) Supply & erection of Solid copper bus-bars 18mm.: Erection
26(c ) (i) Supply & erection of solid copper bus-bar connectors: Bus terminal (6310) Supply
26(c ) (i) Supply & erection of solid copper bus-bar connectors: Bus terminal (6310) Erection
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 5(az)(ii)Erection of span wire
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 6(az)Erection of Over Head equipment only
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 6(bz)Erection of contact wire only
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 7(d)Manual Erection of all aluminium 25KV Feeder/ Return conductor (Single Spider)
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 7(e)Erection of copper cross feeder wires (37/2.25 mm HDBC) across the track at SP/SSP/FP/BT locations
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block 40 @ 100% (As per Annexure A in FORM-5 of attached tender document) 10(az)Extra on item 6(az) for Erection of additional fittings at a turn-out, diamond crossing or overlap
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 12(az)Erection of a section insulator assembly
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 13(a)Erection of a 25 KV single pole isolator withoutout earth contact assembly.
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 15(a)(i) Erection of large copper jumpers
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 15(a)(ii) Erection of small copper jumpers
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 15(az)(iii) Erection of copper jumpers
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 15(a)(iv) Erection of a copper jumper for drop out fuse switch
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 15(d)Erection of Large copper jumper 160 Sq. mm between Aluminium bus and cross feeders
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 15(e)Erection of Large copper jumper 160 Sq. mm between cross feeder and OHE
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 26(a)(ii)Erection of solid copper bus-bars 18mm.:
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 26(c )(i)Erection of solid copper bus-bar connectors: Bus terminal (6310)
32(c)Extra on erection rates (Items of sub-section - IV) for work under a power block @ 100% (As per Annexure A in FORM-5 of attached tender document) 26(c )(iv)Erection of solid copper bus-bar connectors: Bus terminating tee (6351)
33(a)Extra on erection rates for stinging work manually under item 6(a),(b),(c)&(d) @ 50%. (As per Annexure C in FORM-5 of attached tender document) 6(az)Erection of Over Head equipment only
33(a)Extra on erection rates for stinging work manually under item 6(a),(b),(c)&(d) @ 50%. (As per Annexure C in FORM-5 of attached tender document) 6(bz)Erection of contact wire only
26(c) (iv) Supply & erection of solid copper bus-bar connectors: Bus terminating tee (6351) Supply
26(c) (iv) Supply & erection of solid copper bus-bar connectors: Bus terminating tee (6351) Erection Above/
4(ax)Supply of insulators for item 4(a)(i) & 4(a)(iii) 4(ax)(i) Stay Arm Porcelain (CD- 1050mm)
4(ax)Supply of insulators for item 4(a)(i) & 4(a)(iii) 4(ax)(iv) Bracket Porcelain (CD- 1050mm)
8(bx) Supply of 9- Tonne insulators for item 8(b)(i),(ii),(iii), (iv),(vi),(vii), (viii)&(ix) 8(bx)(i)Porcelain (CD-1050mm)
9(ax) Supply of 9- Tonne insulators for item 9(a), (b), (c), (d) & (e) 9(ax)(i) Porcelain (CD-1050mm)
11(ax) Supply of 9- Tonne insulator for item 11(a)(i) &11(a)(ii) 11(ax)(i) Porcelain (CD-1050mm)
12(ax) Supply of 9 - Tonne and Sectioning Insulators for item No.12(a) 12(ax)(i) Porcelian 9- Tonne (CD-1050 mm) & Sectioning Insulator
13(ax)Supply of post& operating rod insulator for item 13(a) Supply
11(bx) Supply of 25 KV post insulator for item 11(b) Supply
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NITapprovedtenderdocument.pdf Tender document
ATTACHMENT
GCC-2022_1.pdf
ATTACHMENT
NITapprovedtenderdocument.pdf
ATTACHMENT
Download all tender documents and submit your bid