Construction Of I.B SUB CENTER OFFICE (G+1) & Cat C-03 Unit (G+1) At Petlad,Dist : Anan (Including Electrification )

Name of Work : Construction Of I.B SUB CENTER OFFICE (G+1) & Cat C-03 Unit (G+1) At Petlad,Dist : Anand (Including Electrification )

SOR 2024-25 (ANAND)

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to tender for Rs

Description Total Qty Unit Rate Rate In Word Rs. Amount

1 Conducting pile load test as per IS 2911 Part-4, 300 mm dia up to the 450 dia - 40 315.00 MT 185.52 RS.One Hundred Eighty Five

Ton, 500 mm dia - 46 ton, 600 dia 71 ton CAPACITY WITH SUBMISSION OF TEST and Paise Fifty Two only

2 Empty boring through all sorts of strata for providing 0.60 Mt. diameter R.C.C. bored 135.00 Rmt 1407.34 RS: One Thousand Four

piles to required depth required depth including providing necessary casing pipe with all Hundred Seven and Paise

plants and equipments as required complete. Thirty Four only

3 Empty boring through all sorts of strata for providing 0.450 Mt. diameter R.C.C. bored 240.00 Rmt 1055.50 RS: One Thousand Ten

piles to required depth required depth including providing necessary casing pipe with all Hundred Fifty Five and Paise

plants and equipments as required complete. Fifty only

4 Empty boring through all sorts of strata for providing 0.50 Mt. diameter R.C.C. bored 188.00 Rmt 1172.78 RS: One Thousand One

piles to required depth required depth including providing necessary casing pipe with all Hundred Seventy Two and

plants and equipments as required complete. Paise Seventy Eight only

5 Excavation for foundation upto 1.5 mt depth including sorting out and stacking of 593.00 Cmt 121.72 RS.One Hundred Twenty

useful materials and disposing off the excavated stuff upto Any lead & Lift (A) LOOSE One and Paise Seventy Two

6 Excavation for foundation in Dense or Hard soil From 1.5 to 3.00 mt depth including 96.00 cmt 168.81 RS.One Hundred Sixty Eight

sorting out and stacking of useful materials and disposing of the excavated stuff upto ANY and Paise Eighty One only

7 Excavation for foundation in Loose or soft soil From 1.5 to 3.00 mt depth including 26.00 Cmt 181.13 RS.One Hundred Eighty One

sorting out and stacking of useful materials and disposing of the excavated stuff upto ANY and Paise Thirteen only

8 Providing & laying Controlled CEMENT CONCRETE 1:3:6 ( 1 cement ; 3 coarse sand; 6 33.00 Cmt 3064.60 RS: Three Thousand

crushed stone aggregates and curing complete including cost of formwork in Sixty Four and Paise Sixty

foundation and plinth. only

9 Providing and laying cement concrete 1:4:8 ( 1 cement ; 4 coarse sand; 8 crushed stone 97.75 Cmt 2742.27 RS: Two Thousand

aggregates 40mm nominal size) and curing complete including cost of form work in Seven Hundred Forty Two

foundation and plinth and Paise Twenty Seven

Description Total Qty Unit Rate Rate In Word Rs. Amount

10 Filling available excavated earth (excluding rock) in trenches. plinth, sides of 439.00 Cmt 135.56 RS.One Hundred Thirty Five

foundations etc. in layers not exceeding 20 cm. in depth consolidating each and Paise Fifty Six only

disposited layer by ramming and watering.

11 Filling in Foundation and Plinth with selected soil or murrum in layers of 20cms. 388.00 Cmt 291.47 RS.Two Hundred Ninty One

thickness including watering, ramming, consolidating and dressing etc.complete As Per and Paise Forty Seven only

Engineer In-Ccharge.

12 FILLING in plinth with SAND under floors including watering, raming consolidating and 29.00 Cmt 477.03 RS.Four Hundred Seventy

dressing etc. complete. Seven and Paise Three

13 Providing & laying Cement Concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone 29.00 Cmt 2581.11 RS: Two Thousand Five

aggrigates of 40 mm nominal size) curing complete inculuding cost of formwork in Hundred Eighty One and

FOUNDATION AND PLINTH. Paise Eleven only

14 Providing & laying Controlled Cement Concrete M 150 and curing complete including 40.00 Cmt 4060.40 RS: Four Thousand

cost of Formwork of Plywood only with fair finish so as to give fair finish and Excluding cost Sixty and Paise Forty only

of reinforcement for reinforced concrete work in foundation & plinth. Rate are also

inclusive of providing and mixing Plasticizer of approved make in proportion as Per Mix

15 Providing and laying cement concrete flooring 1:2:4 ( 1 cement : 2 course sand 15.00 Smt 365.48 RS.Three Hundred Sixty

:4 graded stone aggregate 20mm nominal size) laid in one layer finished with a Five and Paise Forty Eight

floating coat of neat cement. (B) 50 mm thick. only

16 Provinding and Laying controlled cement concrete M-200 and with curing etc.complete. 26.50 Cmt 6046.15 RS: Six Thousand Forty

Including the cost of plywood formwork only with fair finish but excluding the cost of Six and Paise Fifteen only

reinforcement for R.C.C work in Coping . Rate are inclusive of providing and mixing

plastisizer of approved make in propertion as per mix design.

17 Providing & laying Controlled CEMENT CONCRETE M-200 & finishing smooth with curing 5.00 Cmt 7216.21 RS: Seven Thousand

etc. complete including cost of plywood formwork only with fair finish but excluding cost of Two Hundred Sixteen and

reinforcement For Plinth Beam Having any C/s Area. Rate are inclusive of Pro.& Mix Paise Twenty One only

plastisizer of approved make in proportion as per mix design.

18 Providing & laying Controlled CEMENT CONCRETE M-250 & finishing smooth with curing 40.00 Cmt 7271.29 RS: Seven Thousand

etc. complete including cost of plywood formwork only with fair finish but excluding cost of Two Hundred Seventy One

reinforcement For Plinth Beam Having any C/s Area. Rate are inclusive of Pro.& Mix and Paise Twenty Nine only

plastisizer of approved make in proportion as per mix design.

Description Total Qty Unit Rate Rate In Word Rs. Amount

19 Providing and laying Controlled cement concrete M-250 and finishing smooth with curing 0.50 Cmt 9068.22 RS: Nine Thousand

etc.. complete including the cost of plywood formwork only with fair finish exculding the Sixty Eight and Paise

cost of reinforcement of BEAMS having any cross sectional area of Beam For Twenty Two only

GROUND FLOOR. Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

20 Providing and laying Controlled cement concrete M-200 and finishing smooth with curing 21.00 Cmt 9013.15 RS: Nine Thousand

etc.. complete including the cost of plywood formwork only with fair finish exculding the Thirteen and Paise Fifteen

cost of reinforcement of BEAMS having any cross sectional area of Beam For only

GROUND FLOOR. Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

21 Providing and laying Controlled cement concrete M-200 and finishing smooth with curing 16.00 Cmt 9053.86 RS: Nine Thousand

etc.. complete including the cost of plywood formwork only with fair finish exculding the Fifty Three and Paise Eighty

cost of reinforcement of BEAMS having any cross sectional area of Beam For FIRST Six only

FLOOR. Rate are also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

22 Providing and laying Controlled cement concrete M-200 and finishing smooth with curing 3.00 Cmt 9094.57 RS: Nine Thousand

etc.. complete including the cost of plywood formwork only with fair finish exculding the Ninty Four and Paise Fifty

cost of reinforcement of BEAMS having any cross sectional area of Beam For Seven only

SECOND FLOOR. Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

23 Providing and laying Controlled cement concrete M-200 for R.C.C. LINTEL including 5.00 Cmt 8723.92 RS: Eight Thousand

finishing smooth with curing etc. Complete including the cost of plywood formwork only Seven Hundred Twenty

with fair finish but excluding the cost of reinforcement for GROUND FLOOR Providing and Three and Paise Ninty Two

Mixing Plasticiser in cement concrete including rate of labour,material etc.as per direction only

of Engineer in charge.

24 Providing and laying Controlled cement concrete M-200 for R.C.C. LINTEL including 3.00 Cmt 8764.63 RS: Eight Thousand

finishing smooth with curing etc. Complete including the cost of plywood formwork only Seven Hundred Sixty Four

with fair finish but excluding the cost of reinforcement for FIRST FLOOR Providing and and Paise Sixty Three only

Mixing Plasticiser in cement concrete including rate of labour,material etc.as per direction

of Engineer in charge.

Description Total Qty Unit Rate Rate In Word Rs. Amount

25 Provinding and Laying controlled cement concrete M-200 including finishing smooth with 1.00 Cmt 14818.45 RS: Fourteen Thousand

curing etc. Complete including the cost of plywood formwork only with fair finish but Eight Hundred Eighteen and

excluding the cost of reinforcement work in VARTICAL AND HORIZONTAL FINS / Paise Forty Five only

PADADI For GROUND FLOOR. Rate are inclusive of providing and mixing plastisizer of

approved make in propertion as per mix design.

26 Provinding and Laying controlled cement concrete M-200 including finishing smooth with 1.00 Cmt 14859.16 RS: Fourteen Thousand

curing etc. Complete including the cost of plywood formwork only with fair finish but Eight Hundred Fifty Nine and

excluding the cost of reinforcement work in VARTICAL AND HORIZONTAL FINS / Paise Sixteen only

PADADI For FIRST FLOOR.Rate are inclusive of providing and mixing plastisizer of

approved make in propertion as per mix design.

27 Provinding and Laying controlled cement concrete M-250 including finishing smooth with 14.50 Cmt 8048.83 RS: Eight Thousand

curing etc. Complete including the cost of plywood formwork only with fair finish but Forty Eight and Paise Eighty

excluding the cost of reinforcement work in VARTICAL AND HORIZONTAL FINS / Three only

PADADI For ALL FLOOR. Rate are inclusive of providing and mixing plastisizer of

approved make in propertion as per mix design.

28 Provinding and Laying controlled cement concrete M-200 and Finishing smooth with 9.00 Cmt 9880.57 RS: Nine Thousand

curing etc.complete. Including the cost ofplywood formwork only with fair finish but Eight Hundred Eighty and

excluding the cost of reinforcement for R.C.C work in WALLS heving any cross section Paise Fifty Seven only

area of Wall for Foundation And Plinth Rate are inclusive of providing and mixing

plastisizer of approved make in propertion as per mix design.

29 Providing & Laying Controlled Cement Concrete M-200 & and finishing smooth with 44.00 Cmt 8054.31 RS: Eight Thousand

Curing Complete including the cost of plywood formwork only with fair finish but excluding Fifty Four and Paise Thirty

cost of the reinforcement for RCC Work in SLAB having thickness of 10cm TO 13cm at One only

GROUND FLOOR. Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

30 Providing & Laying Controlled Cement Concrete M-200 & and finishing smooth with 32.00 Cmt 8095.02 RS: Eight Thousand

Curing Complete including the cost of plywood formwork only with fair finish but excluding Ninty Five and Paise Two

cost of the reinforcement for RCC Work in SLAB having thickness of 10cm TO 13cm at only

FIRST FLOOR. Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

Description Total Qty Unit Rate Rate In Word Rs. Amount

31 Providing & Laying Controlled Cement Concrete M-200 & and finishing smooth with 5.50 Cmt 8135.73 RS: Eight Thousand One

Curing Complete including the cost of plywood formwork only with fair finish but excluding Hundred Thirty Five and

cost of the reinforcement for RCC Work in SLAB having thickness of 10cm TO 13cm at Paise Seventy Three only

SECOND FLOOR. Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

32 Providing & Laying Controlled Cement Concrete M-200 & and finishing smooth with 2.50 Cmt 7627.61 RS: Seven Thousand Six

Curing Complete including the cost of plywood formwork only with fair finish but excluding Hundred Twenty Seven and

cost of the reinforcement for RCC Work in SLAB having thickness of 13cm TO 15cm at Paise Sixty One only

GROUND FLOOR. Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

33 Providing & Laying Controlled Cement Concrete M-250 & and finishing smooth with 3.00 Cmt 8162.57 RS: Eight Thousand One

Curing Complete including the cost of plywood formwork only with fair finish but excluding Hundred Sixty Two and

cost of the reinforcement for RCC Work in SLAB having thickness of 13cm TO 15cm at Paise Fifty Seven only

GROUND FLOOR. Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

34 Providing and laying Controlled cement concrete M-200 including finishing smooth for 11.00 Cmt 8366.48 RS: Eight Thousand

R.C.C. STAIR CASE including centering plywood formwork only with fair finish and curing Three Hundred Sixty Six and

etc. Complete excluding cost of reinforcement for ALL FLOORS. Providing and Mixing Paise Forty Eight only

Plasticiser in cement concrete including rate of labour,material etc.as per direction of

Engineer in charge.

35 Provinding and Laying controlled cement concrete M-250 for reinforced conerete 5.00 Cmt 9704.75 RS: Nine Thousand

CHHAJJAS not exceeding 10cm thickness up to floor two level including finishing the Seven Hundred Four and

exposed surface with cement mortar 1:3 ( 1 cement : 3 fine sand) to give a smooth surface Paise Seventy Five only

,centering and plywood .formwork only with fair finish and curing complete. excluding cost

of reinforcement for ALL FLOOR. Providing and Mixing Plasticiser in cement concrete

including rate of labour,material etc.as per direction of Engineer in charge.

36 Providing and laying controlled concrete M-250 for R.C.C bored piles of 0.600 mtdia to 263.00 Cmt 4744.73 RS: Four Thousand

1.20 mt.diameter including ramming,vibrating and finishing complete.Rate are inclusive of Seven Hundred Forty Four

Pro.& Mix plastisizer of approved make in proportion as per GSPHCL Approved List. and Paise Seventy Three

37 Providing and casting in Situ controlled concrete M-250 for R.C.C piles Cap 80.00 Cmt 4673.69 RS: Four Thousand Six

including necessary formwork,vibrating,curing,and finishing complete.Rate are Hundred Seventy Three and

inclusive of Pro.& Mix plastisizer of approved make in proportion as per GSPHCL Paise Sixty Nine only

Description Total Qty Unit Rate Rate In Word Rs. Amount

38 Providing & laying Controlled CEMENT CONCRETE M-200 and finishing smooth with 1.00 Cmt 4379.20 RS: Four Thousand

curing etc complete including the cost of plywood formwork only with fair finish but Three Hundred Seventy Nine

excluding the cost of reinforcement in FOOTING base of columns and Mass concrete. and Paise Twenty only

Rate are also inclusive of providing and mixing Plasticizer of approved make in proportion

as Per Mix Design.

39 Providing & laying controlled CEMENT CONCRETE of M- 250 and Finishing smooth with 18.00 Cmt 8930.90 RS: Eight Thousand

curing complete including the cost of plywood formwork only with fair finish but excluding Nine Hundred Thirty and

the cost of reinforcement for RCC work in Column up to plinth for any cross sectional Paise Ninty only

area. of Column Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

40 Providing & laying controlled CEMENT CONCRETE of M- 200 and Finishing smooth with 2.00 Cmt 8636.41 RS: Eight Thousand Six

curing complete including the cost of plywood formwork only with fair finish but excluding Hundred Thirty Six and

the cost of reinforcement for RCC work in Column up to plinth for any cross sectional Paise Forty One only

area. of Column Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

41 Providing & laying controlled CEMENT CONCRETE of M- 200 and Finishing smooth with 18.00 Cmt 10717.50 RS: Ten Thousand

curing complete including the cost of plywood formwork only with fair finish but excluding Seven Hundred Seventeen

the cost of reinforcement for RCC work in Column For GROUND FLOOR for any cross and Paise Fifty only

sectional area. of Column Rate are also inclusive of providing and mixing Plasticizer of

approved make in proportion as Per Mix Design.

42 Providing & laying controlled CEMENT CONCRETE of M- 200 and Finishing smooth with 14.00 Cmt 10758.21 RS: Ten Thousand

curing complete including the cost of plywood formwork only with fair finish but excluding Seven Hundred Fifty Eight

the cost of reinforcement for RCC work in Column For FIRST FLOOR for any cross and Paise Twenty One only

sectional area. of Column Rate are also inclusive of providing and mixing Plasticizer of

approved make in proportion as Per Mix Design.

43 Providing & laying controlled CEMENT CONCRETE of M- 200 and Finishing smooth with 5.00 Cmt 10798.92 RS: Ten Thousand

curing complete including the cost of plywood formwork only with fair finish but excluding Seven Hundred Ninty Eight

the cost of reinforcement for RCC work in Column For SECOND FLOOR for any cross and Paise Ninty Two only

sectional area. of Column Rate are also inclusive of providing and mixing Plasticizer of

approved make in proportion as Per Mix Design.

44 Providing TMT steel (Fe - 500D) reinforcement for R.C.C. work including cutting, bending, 95820.00 Kg. 76.95 RS. Seventy Six and Paise

binding and placing in position etc. Complete for all floor. Brand As approved by the Ninty Five only

GSPHCL only shall be Used.

Description Total Qty Unit Rate Rate In Word Rs. Amount

45 Brick Bat Filling 40mm thick at Requred Depth as per Drawings and Specifications and 7.50 Cmt 501.29 RS.Five Hundred One and

Direction of Engg - in - Charge. Paise Twenty Nine only

46 Honey Comb common burnt clay building bricks having crushing strength not less 7.00 Cmt 2795.64 RS: Two Thousand

than 35 Kg./Sq. cm. In FOUNDATION AND PLINTH in cement mortar 1 : 6 ( 1 Seven Hundred Ninty Five

cement : 6 coarse sand ( Conventional Bricks ) and Paise Sixty Four only

47 Brick work using common burnt clay building bricks having crushing strength not less than 273.00 Cmt 4172.60 RS: Four Thousand One

35 Kg/Sq.cm.in foundation and plinth in cement mortar 1:6 (1-cement:6-coarse sand) (B) Hundred Seventy Two and

Conventional bricks Paise Sixty only

48 BRICK WORK using common burnt clay building bricks having crushing strength not less 129.00 Cmt 4451.53 RS: Four Thousand Four

than 35 Kg./Sq. cm. In in cement mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Hundred Fifty One and Paise

Bricks ) for Ground Floor. Mortar shall be prepared by mixture machine only. Fifty Three only

49 BRICK WORK using common burnt clay building bricks having crushing strength not less 86.00 Cmt 4493.23 RS: Four Thousand Four

than 35 Kg./Sq. cm. In in cement mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Hundred Ninty Three and

Bricks ) for First Floor. Mortar shall be prepared by mixture machine only. Paise Twenty Three only

50 BRICK WORK using common burnt clay building bricks having crushing strength not less 54.00 Cmt 4534.93 RS: Four Thousand Five

than 35 Kg./Sq. cm. In in cement mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Hundred Thirty Four and

Bricks ) for Second Floor. Mortar shall be prepared by mixture machine only. Paise Ninty Three only

51 HALF BRICK masonary in common brunt clay building bricks having crusing strength not 2.50 Smt 623.60 RS.Six Hundred Twenty

less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) conventional Three and Paise Sixty only

bricks for foundation and plinth.

52 HALF BRICK masonary in common brunt clay building bricks having crushing strength not 188.00 Smt 677.49 RS.Six Hundred Seventy

less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) conventional Seven and Paise Forty Nine

bricks for Ground Floor. Mortar shall be prepared by mixture machine only . only

53 HALF BRICK masonary in common brunt clay building bricks having crushing strength not 86.00 Smt 683.73 RS.Six Hundred Eighty

less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) conventional Three and Paise Seventy

bricks for First Floor. Mortar shall be prepared by mixture machine only . Three only

54 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering 295.00 Smt 226.08 RS.Two Hundred Twenty Six

and finished even & smooth in C.M. 1:3 ( 1 cement : 4 sand ) including finishing with a and Paise Eight only

floating coat of neat cement slurry at Ground Floor. Mortar shall be prepared by mixture

Description Total Qty Unit Rate Rate In Word Rs. Amount

55 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering 220.00 Smt 252.56 RS.Two Hundred Fifty Two

and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a and Paise Fifty Six only

floating coat of neat cement slurry at First Floor. Mortar shall be prepared by mixture

56 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering 32.00 Smt 279.04 RS.Two Hundred Seventy

and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Nine and Paise Four only

floating coat of neat cement slurry at Second Floor. Mortar shall be prepared by mixture

57 Providing 15 mm thick cement PLASTER in single coat on brick or concrete wall for 905.00 Smt 230.38 RS.Two Hundred Thirty and

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Paise Thirty Eight only

finishing with floating coat of neat cement slurry at Ground Floor. Mortar shall be

prepared by mixture machine only.

58 Providing 15 mm thick cement PLASTER in single coat on brick or concrete wall for 630.00 Smt 258.85 RS.Two Hundred Fifty Eight

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including and Paise Eighty Five only

finishing with floating coat of neat cement slurry at First Floor.Mortar shall be prepared

by mixture machine only.

59 Providing 15 mm thick cement PLASTER in single coat on brick or concrete wall for 220.00 Smt 287.32 RS.Two Hundred Eighty

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Seven and Paise Thirty Two

finishing with floating coat of neat cement slurry at Second Floor. Mortar shall be only

prepared by mixture machine only.

60 Providing 20 mm thick SAND FACED cement Plaster on walls above ground level 870.00 Smt 348.95 RS.Three Hundred Forty

consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thick Eight and Paise Ninty Five

finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height. Mortar shall only

be prepared by mixture machine only. Plaster should be done by gutkha only.

61 Synthetic Texture Plaster with Double Coat Smooth plaster : Providing 20mm thick 1151.00 Smt 534.08 RS.Five Hundred Thirty Four

cement plaster in single coat plastering upto floor two level Outside and finished even and and Paise Eight only

smooth in (i) Cement mortar 1:3 (1-cement : 3-sand) as Base Coat and providing 2-3 mm

thick synthetic texture plaster of approved texture (Material Shall be Used as Approved By

GSPHCL Only ) including cost of all materials, labour, conveyance, loading and unloading,

taxes, royalties, scaffolding, watering etc.complete for any Height as per Drawing and

instructions of Engineer -in -Charge.

62 Providing Cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 including 186.00 Rmt 24.04 RS. Twenty Four and Paise

neat cement finishing, watering etc.complete. Four only

Description Total Qty Unit Rate Rate In Word Rs. Amount

63 Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush Door Shutter with 5.00 Smt 11087.52 RS: Eleven Thousand

1mm Thick Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Eighty Seven and Paise

Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Fifty Two only

Veneer on Both Side with Lock rail on Center. ........

Flush Door with Door Frame of Non Teak Solid Wood of size 150mm x 70mm with

Chemically Treated and Seasoned Including Paint Matching with Laminates. Frame &

Flush door shutter having 5 year warranty against attack of biological agent like termite,

borers, decay, fungi and harmful insects also warranty against seasoning related issues

like crack, bending, twisting, warping. Laminates on shutter shall be press by cold press

method. Shutter shall be.........

completion of work in such a way that shutter & Frame is free from nail mark & any

damages etc. Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Hold

Fast (25mm X 5mm) & 8 No of 6 Inch S.S. but Hinges, ...........

following S.S. Fixtures And Fastening.

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No, 100mm Long, (3) Double Leg

Heavy Push Door Stopper 2 No & (4) Handle 4 No, 150mm Long X 10mm thick. Door are

Fixing as per Details ...........

approved Material Make List of G.S.P.H.C. The Required Frame is to be Obtained from

Vanil Udhyog Maked Only. Rate are Including Bidding Patti 40 x 10mm

64 Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush Door Shutter with 13.00 Smt 8982.61 RS: Eight Thousand

1mm Thick Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Nine Hundred Eighty Two

Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face and Paise Sixty One only

Veneer on Both Side with Lock rail on Center. ........

Flush Door with Door Frame of Non Teak Solid Wood of size 120mm x 65mm with

Chemically Treated and Seasoned Including Paint Matching with Laminates. Frame &

Flush door shutter having 5 year warranty against attack of biological agent like termite,

borers, decay, fungi and harmful insects also warranty against seasoning related issues

like crack, bending, twisting, warping. Laminates on shutter shall be press by cold press

method. Shutter shall be.........

Description Total Qty Unit Rate Rate In Word Rs. Amount

completion of work in such a way that shutter & Frame is free from nail mark & any

damages etc. Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Hold

Fast (25mm X 5mm) & 8 No of 6 Inch S.S. but Hinges, ...........

following S.S. Fixtures And Fastening.

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No, 100mm Long, (3) Double Leg

Heavy Push Door Stopper 2 No & (4) Handle 4 No, 150mm Long X 10mm thick. Door are

Fixing as per Details ...........

approved Material Make List of G.S.P.H.C. The Required Frame is to be Obtained from

Vanil Udhyog Maked Only.Rate are Including Bidding Patti 40 x 10mm

65 Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush Door Shutter with 45.00 Smt 8405.99 RS: Eight Thousand

1mm Thick Laminates on Both Side of Shutter. Making / Construction of Flush Door is with Four Hundred Five and

Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Paise Ninty Nine only

Veneer on Both Side with Lock rail on Center. ........

Flush Door with Door Frame of Non Teak Solid Wood of size 100mm x 60mm with

Chemically Treated and Seasoned Including Paint Matching with Laminates. Frame &

Flush door shutter having 5 year warranty against attack of biological agent like termite,

borers, decay, fungi and harmful insects also warranty against seasoning related issues

like crack, bending, twisting, warping. Laminates on shutter shall be press by cold press

method. Shutter shall be.........

completion of work in such a way that shutter & Frame is free from nail mark & any

damages etc. Rates are also Inclusive of all Labors & Proviging 15cm. Long 8 No of Hold

Fast (25mm X 5mm) & 8 No of 6 Inch S.S. but Hinges, ...........

following S.S. Fixtures And Fastening.

(1) Aldrops 2 No, 250mm x 16mm, (2) Door Stopper 2 No, 100mm Long, (3) Double Leg

Heavy Push Door Stopper 2 No & (4) Handle 4 No, 150mm Long X 10mm thick. Door are

Fixing as per Details ...........

approved Material Make List of G.S.P.H.C. The Required Frame is to be Obtained from

Vanil Udhyog Maked Only.Rate are Including Bidding Patti 40 x 10mm

Description Total Qty Unit Rate Rate In Word Rs. Amount

66 Providing and fixing solid PVC Flush Door shutter 24mm thick. made from Co- 30.00 Smt 4512.84 RS: Four Thousand Five

extruded three layer rigid PVC foam sheet(single Extruded) with density not less than Hundred Twelve and Paise

600kg/cbm outer layer (0.8-1mm)thick should be rigid PVC with density of not less than Eighty Four only

1400kg/cbm. Door should be water proof, Termite proof, fire retardant & having good screw

holding capacity(200 kgf). Providing and fixing 100% Solid Wood Plastic composite (WPC)

Door Frame 90mmx45mm made from wood plastic composite(single Extruded

Process)material with density 780kg/cbm. As per drawing as directed by the engineer in

charge.including PVC beading patti 40x10mm

67 Providing and fixing Alluminium section window having extruded Aluminum Colour 42.00 Smt 1568.27 RS: One Thousand Five

anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section Hundred Sixty Eight and

no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm Paise Twenty Seven only

x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm

x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters.of

horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of

Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @

wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with colour

anodized aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame

as per details With Both Side Locking Arrangment

68 Providing and fixing Alluminium section window having extruded Aluminum Colour 30.00 Smt 1902.50 RS: One Thousand Nine

anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section Hundred Two and Paise

no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x Fifty only

1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x

31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section no:8947@ wt.of

Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @

wt.of 0.456Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame

as per details including one mosquitoe jali shutter With Both Side Locking Arrangment

for ALL FLOORS.

69 Providing and fixing standard extruded of alluminium section of size 63 * 38.10 * 1.2 mm ( 7.00 Smt 1163.92 RS: One Thousand One

Jindal section NO:2434,@Wt 0.643 Kg/RMT )with colour aNOdized alluminium frame for Hundred Sixty Three and

ventilation with 5 mm thick frosted glass as details etc complete for ventilation Paise Ninty Two only

Description Total Qty Unit Rate Rate In Word Rs. Amount

70 Pro. & Fixing colour Anodised Alluminium fixed louveres made of 1"*4" 16.00 Smt 1762.71 RS: One Thousand

ALLUMINIUM SECTION of 2mm thick (jindal/Banco make)fixed at 0.14mt c/c with Seven Hundred Sixty Two

alluminium cleats to m.s. angular frame of 355mm*35mm duly anodised and fixed and Paise Seventy One

with rcc/brick wall with fastners as per arch. drawings.all the screws and other only

visible fixtures are also to be anodised as per specification.

71 Providing and Fixing Extruded Alluminium Section 15 Microns Regular Anodized 2.30 Smt 4442.73 RS: Four Thousand Four

(coating with matt finished and excellent outdoor durability) Door with partly glazed of Hundred Forty Two and

5mm clear float glass & partly both sides pre laminated partly board of 12mm thick as Paise Seventy Three only

per detailed drawing and specification gaskets of EPDM quality shall be provided for

weather tightening along with silicon sealent of dow corning/G.E. silicon/wacker germany of

equivalent complete etc. as approved by architect complete as per the following sections of

Jindal make or equivalent.

72 Providing and fixing DOOR CLOSER of pneumatic/hydraulic of ISI brand including 1.00 No 1966.73 RS: One Thousand Nine

fitting and fixtures etc. complete as per directed by Engineer-in-charge. Hundred Sixty Six and Paise

Seventy Three only

73 Providing & Lay 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring over 20 418.00 Smt 1560.30 RS: One Thousand Five

mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface Hundred Sixty and Paise

orfixing on existing flooring by adhesive including dismentaling of existing flooring and Thirty only

material jointed with color cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

74 Providing and laying double charge Vitrified tiles 8mm to 10mm thicke of approved brand 48.00 Smt 1445.20 RS: One Thousand Four

and manufacture with sizing in skirting of 10mm thick cement mortar plaster 1:3(-1- Hundred Forty Five and

cement;3-coarse sand) or jointed with white cement slurry including flush pointing, rubbing Paise Twenty only

and curing etc .complete.

75 Provinding and laying inegrated cement based water proofing treatment of required 396.00 Smt 946.09 RS.Nine Hundred Forty Six

thickness over the roof including 10mm thick waterproofing cement plaster in cement and Paise Nine only

plaster in cement mortar1:3 and chaina mosaic fitting and finally finishing the surfase with

white cement slurry and slopping out taerrace slabs with following specification laid to

required slope not flatter than 1:80 ( the thickness of water proofing treatment near

rainwater outlet or the lowest point of the finishedslope shall not be less then 45mm,

including treating the vertical surfaseof the parapet wall up to 20cms . height above

finished level of terracing including finishing the top with joint less water proofing plaster

curing , testing etc. complete. Rate is including ten years performance of guarantee bond

to be given on stamp paper. (No extra shall be paid for increase in thickness for proper

Description Total Qty Unit Rate Rate In Word Rs. Amount

admixed with properly water proofing compound conforming to IS -2645 and 10 mm thick

water proofing cement plaster in Cement mortar 1:3 over the R.C.C.slab incl. cleaning the

surface before treatment

cement mortar 1:4 (1cement :4 coarse sand ) over 10mm thick water proofing cement

plaster in cement mortar 1:3 (1 cement ,3 coarse sand) admixed with proprietary water

proofing compound conforming to IS 2645 to required slope and treating similarly the

adjoining walls up to 200mm height incl. rouding of junction of walls.

plaster of mix 1:3(1 cement :3 coarse sand )admixed with proprietary water proofing

compound conforming to IS :2645 and finally finishing the surface with trowel with neat

weeks for curring for final taste

All above operation to be done in order and as directed and specified by the Engineer

76 Pro and Laying 25mm thick Doubel Pre polished ( Dimond polished ) polished kota stone 85.00 Smt 1108.30 RS: One Thousand One

flooring over average 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand ) Hundred Eight and Paise

and jointeed with gray cement slarry including rubbing and polishing etc. complete All kota Thirty only

stone edge shall be hand cutting Machine Cut shall be not allowed..

77 Pro and Laying Doubel Pre polished ( Dimond polished ) polished kota stone slab 25mm 12.50 Smt 1271.60 RS: One Thousand Two

thick in risers of steps.dedo,Skirting and pillars laid on 10mm thick cement mortar 1:3 ( Hundred Seventy One and

1 cement : 3 coars sand ) and jointed with gray cement slarry including rubbing & polishing Paise Sixty only

78 Providing and fixing both side polished machine cut 25mm thick Kota Stone 33.00 Smt 793.90 RS.Seven Hundred Ninty

shelve/partition 25 mm thick embaded in to a wall at support including racking and Three and Paise Ninty only

finishing smooth the surface including cutting the stone as and where required

etc.complete including full rounding of exposed edges etc. complete all floors. As

Per Direction Of Engineer In Charge

Description Total Qty Unit Rate Rate In Word Rs. Amount

79 Providing and Fixing Granite Telephonic Black Colour 18 mm thick for jambs and sills 113.00 Smt 2428.00 RS: Two Thousand Four

of doors & windows using neat cement slurry laid over 20 mm average base of cement Hundred Twenty Eight

mortar 1:1(1 cement:1 Coarse Sand) and jointed with grey cement slurry including only

racking(Tancha Work) rubbing and polishing,scaffoldings,tools and tackles,scaffolding etc.

complete(with base of neat cement) as per direction of Engineer in charge including fully

rounding the exposed edges as directed.

80 Provinding and Laying 18 mm thick Telephonic black Granite Stone Slab Flooring 35.00 Smt 2158.45 RS: Two Thousand One

over 20mm thick average base of C.M. 1:6 (1cement : 6 coarse sand) laid and jointed with Hundred Fifty Eight and

grey cement slury including Rubbing and Polishing etc. Complete for All Floors. Paise Forty Five only

81 Provinding and Laying 18 mm thick Telephonic black Granite stone slab in Skirting / 35.00 Smt 2321.66 RS: Two Thousand

Dado over 10mm thick average base of C.M. 1:3 (1:cement :3 coarse sand) laid and Three Hundred Twenty One

jointed with grey cement slury including Rubbing and Polishing etc. Complete for All Floors. and Paise Sixty Six only

82 Providing & Fixing Granite shelves of 15 to 18 mm thk For Bath room & wash 2.00 Smt 2115.40 RS: Two Thousand One

basin only with Moulding on al sides incl. making Grooves in the wall and then Hundred Fifteen and Paise

making it good as per Engi.in charge. Forty only

83 Moulding Of Kota Stone/Granite Stair Trade Complete As Per Direction Of Engineer In 105.00 Rmt 129.95 RS.One Hundred Twenty

Charge Nine and Paise Ninty Five

84 Pro. 3 Nos Groove In Total Length Of Staircase Tread Of Size 10mm*10mm Finished 160.00 Rmt 82.80 RS. Eighty Two and Paise

Smooth In Parallel Line , Equally Spaced As Per Direction Of Engineer In-Charge In All Eighty only

Type Of Flooring , Etc. Complete

85 Proviidng and Laying coloured glazed tiles of the size 300mmx600mmx8mm in 274.00 Smt 1473.50 RS: One Thousand Four

skirting,risers of steps and dedo on 10mm thick cement plaster 1:3(1cement:3 coarse Hundred Seventy Three and

sand)& jointed with white cement slurry Paise Fifty only

86 Providing & Lay 24" x 24" Anti skid vitrified 8 to 10 mm thick tile flooring over 20 mm 65.00 Smt 1453.19 RS: One Thousand Four

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface orfixing on Hundred Fifty Three and

existing flooring by adhesive including dismentaling of existing flooring and material jointed Paise Ninteen only

with color cement slurry including finised with flush pointing & cleaning the surface etc.

complete for light shade

Description Total Qty Unit Rate Rate In Word Rs. Amount

87 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop Surface 540.00 Smt 193.02 RS.One Hundred Ninty

(two coats) to give an required shap even shade after throughly brushing the surface to Three and Paise Two only

remove all dirt and remains of loose poweder material etc. complete. Rate are inclusive of

applying two coat of lapy (Putty) and one coat of primer on new Ceilling/Slop Surface to

give and even shade including thoroughly brushing the surface free from mortar dropping

andother foreign matter and sand papered smooth. Fine Putty primers and Plastic

Emulsion Paint Shall Be Used As Per approved Material List By G.S.P.H.C

88 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an 1625.00 Smt 179.92 RS.One Hundred Seventy

required shap even shade after throughly brushing the surface to remove all dirt and Nine and Paise Ninty Two

remains of loose poweder material etc. complete. Rate are inclusive of applying two coat of only

lapy (Putty) and one coat of primer on new wall surface to give and even shade including

thoroughly brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.primers and Plastic Emulsion Paint & Putty Shall Be Used As Per

approved Material List By G.S.P.H.C

89 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) 2042.00 Smt 153.35 RS.One Hundred Fifty Three

over and above applying One Coat Of Primer to give an required shape even shade after and Paise Thirty Five only

thoroughly brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete.primers and exterior Emulsion Paint Shall Be Used As Per

approved Material List By G.S.P.H.C

90 Applying general insecticide pest control treatment to floors, cupboards etc including 296.00 Smt 90.72 RS. Ninty and Paise

labour material etc. complete. Using Heptachloride 20 EC. As Per 6113_pests Seventy Two only

Consentration Weight 0.50 percent is recommended one litre chemical emulsion dillute with

39 liter of water will give. Total dillute concrentration will be 40 litre inclusive of one litre

chemical emulsion appication 0.5 Litre chemical / Sqm of surface is recommended as per

91 Constructing of cooking platform ( sandwich type ) 68cm width and 80cm high resting on 4.25 Rmt 3758.34 RS: Three Thousand

thick sandwiched polish Granite Slab in C.M 1:3 with providing and fixing 25 mm thick Seven Hundred Fifty Eight

rough kota stone at bottom and 20 to 25 mm thick Polish Granite stone ( single piece/ and Paise Thirty Four only

telephonic Black ) top & Vertical and polished granite stone (single piece/ telephonic Black

) 20 to 25mm thick on top & 18mm thick in Vertical with 15mm high machine cut polished

granite round moulded Top facia patty including polishing etc . complete as per drawing

and specification without stainless steel sink including necessary cutting for sink & making

hole for gas pipe and fixing P.V.C bend of 25mm dia.

Description Total Qty Unit Rate Rate In Word Rs. Amount

92 Providing and Fixing 3mm thick acrylic sheet with Vinyl letter colour-2073- dark grey for 2.50 Smt 7193.89 RS: Seven Thousand

One Hundred Ninty Three

back ground and colour-2199-white letter with required screws…etc as per required sizes

and Paise Eighty Nine only

complete etc as per specification & instruction as per engineer Incharge.

93 Provinding supplying and fixing stainless steel 304 Grade letters as per detail drawing and 560.00 Sq.Inch 118.20 RS.One Hundred Eighteen

instruction of Engineer Incharge and Paise Twenty only

94 P & F to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 90mm Dia 93.00 Rmt 302.54 RS.Three Hundred Two and

Complete with Special flings, Compressor type Fittings, Pipe fixing for Vertical Rain water Paise Fifty Four only

pipe, Including making good the ceiling and floor on terrace rain water pipe shall be 90 mm

Dia. SWR horizontal pipe and vertical pipe and 90mm bend at the end near by Ground

level rate are Inclusive of all Necessary Fittings required.

95 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste pipe with "O" ring 109.00 Rmt 245.74 RS.Two Hundred Forty Five

of ISI13592/92-2013 (Reaffirmed 2018) or its relevant & latest edition &, Pipe fixing for and Paise Seventy Four

Vertical Drain pipe, etc.complete and making good the wall ceiling and floor. (A) 75mm dia only

96 Providing and fixing to wall, ceiling and floor U.PVC SWR soil waste pipe with ' O ' Ring 88.00 Rmt 471.36 RS.Four Hundred Seventy

110 mm dia. of ISI13592/92-2013 (Reaffirmed 2018) or its relevant & latest edition & Pipe One and Paise Thirty Six

fixing for Vertical Drain pipe, etc.complete and making good the wall ceiling and floor. (B) only

97 Providing and Fixing in Position Cowel Vent to Pipes of 75 mm dia. 11.00 No 16.47 RS. Sixteen and Paise

Forty Seven only

98 Providing and Fixing in Position Cowel Vent to Pipes of 110 mm dia. 9.00 No 28.16 RS. Twenty Eight and Paise

99 Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) 127.00 Rmt 206.73 RS.Two Hundred Six and

PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. Paise Seventy Three only

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.

complete. Pipe shall be concealed or open as mention in tender description. Pipe shall be

as per approved make of GSPHCL make list. [B] 20 mm inner dia.

100 Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) 194.00 Rmt 251.31 RS.Two Hundred Fifty One

PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. and Paise Thirty One only

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.

complete. Pipe shall be concealed or open as mention in tender description. Pipe shall be

as per approved make of GSPHCL make list. [C] 25mm inner dia.

Description Total Qty Unit Rate Rate In Word Rs. Amount

101 Providing and fixing concealed or open center point to wall ceiling & floor CPVC (SDR 13.5) 432.00 Rmt 443.29 RS.Four Hundred Forty

PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. Three and Paise Twenty

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Nine only

complete.rate including Z-patti. Pipe shall be concealed or open as mention in tender

description. Pipe shall be as per approved make of GSPHCL make list. [D] 40 mm inner

102 Providing and fixing concealed or open center point to wall ceiling & floor 65mm Dia CPVC 100.00 Rmt 1312.94 RS: One Thousand

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of Three Hundred Twelve and

following dia. nominal bore tube fittingswith Z patti (Minimum 1.6mm thick) with 6mm Dia U Paise Ninty Four only

Clamp with washer for Vertical water supply pipe. Pipe shall be concealed or open as

mention in tender description. Pipe shall be used as per approved make list by GSPHCL

103 Providing and fixing S W R Nahni trap of the following nominal dia. Self cleaning design 10.00 No 568.89 RS.Five Hundred Sixty Eight

with top jali and stainer including cost of cutting and making good the walls and floors and Paise Eighty Nine only

100mm inlet and 50mm outlet.Including 150 mm x 150 mm stainless steel jali with grating.

104 Providing and fixing S W R Nahni trap of the following nominal dia. Self cleaning design 15.00 No 580.47 RS.Five Hundred Eighty and

with top jali and stainer including cost of cutting and making good the walls and floors Paise Forty Seven only

100mm inlet and 50mm outlet.Including 150 mm x 150 mm stainless steel jali with grating.

105 Providing and fixing S W R MULTI trap of the following nominal dia. Self cleaning design 5.00 No 508.29 RS.Five Hundred Eight and

with top jali and stainer including cost of cutting and making good the walls and floors Paise Twenty Nine only

100mm inlet and 50mm outlet.Including 150 mm x 150 mm stainless steel jali with grating.

106 Providing & Fixing Single Hole Wash Basin with CI or M.S. brackete & M. I fisher union, 13.00 No 3935.33 RS: Three Thousand

P.V.C water pipe with Connection from Stop Cock to Pillar Tap, PVC Bottle Trap with Nine Hundred Thirty Five

Connection 32mm dia. C.P brassa waste coupling etc. Complete. Rate are inclusive of all and Paise Thirty Three only

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In charge. The Model & Make of

Wash Basin pillar tap,Angle tap ,Bottel Trap Shall be as per the Approved Make List of

Description Total Qty Unit Rate Rate In Word Rs. Amount

107 Providing and fixing Wash down white vitreious china WALL HUNG (as Per Approved 13.00 No 5470.90 RS: Five Thousand Four

Material List )water closet EUROPEAN TYPE W/C PAN of size 555x360x390mm with Hundred Seventy and Paise

intergal "P" trap including jointing the trap with pan and soil pipe in vitereous china white Ninty only

colour. Rate inclusive of providing and fixing PVC Flush Tank (as Per Approved Material

List ) Soft seat of the same make. Rate are inclusive of all necessary fittings required for

installation of flushing tank and wall hung. Wall hung shall be fixed on S.S heavy duty rack

bolt having 16mm dia, 165mm length using Plastic sleeve Make by Using Drill Bitt Only.

108 Providing and fixing in positon ISI marked Rotational moulded Polyethylene double layer 17000.00 Lit 3.91 RS. Three and Paise Ninty

cylindrical vertical storage tank (IS : 12701 ) water tank size including making inlet and One only

outlet. Overflow and wash out arrangement with GI connection including using necessary

M.H for connection etc. Complete with closed cover including applying two coats of oil

pianting outside the tank etc complete.& all materials used as per approved material List

109 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 40 13.00 No 656.86 RS.Six Hundred Fifty Six and

mm dia. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as Paise Eighty Six only

per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. All

material used as per approved make list by GSPHCL.

110 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 65 2.00 No 4865.50 RS: Four Thousand

mm dia. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as Eight Hundred Sixty Five and

per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. All Paise Fifty only

material used as per approved make list by GSPHCL.

111 Provinding and fixing gun metal check or non return full way WHEEL / HANDLE VALVE 25 5.00 No 416.47 RS.Four Hundred Sixteen

mm dia. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as and Paise Forty Seven only

per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. All

material used as per approved make list by GSPHCL.

112 Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all matreials, Labour 13.00 No 565.51 RS.Five Hundred Sixty Five

& Necessary Fittings etc. Complete as per 6 Detailed Drawings, Specifications and as per and Paise Fifty One only

the Instruction of Engineer In charge. The Model & Make of Health Faucets Shall be as per

the Approved Make List of GSPHCL

Description Total Qty Unit Rate Rate In Word Rs. Amount

113 Providing & Fixing SHOWER WITH ARMS (as Per Approved Material List ) ,make with 11.00 No 931.79 RS.Nine Hundred Thirty One

all neccery fitting. Rate are inclusive of all matreials, Labour & Necessary Fittings etc. and Paise Seventy Nine

Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer only

In charge. The Model & Make of SHOWER WITH ARMS Shall be as per the Approved

Make List of GSPHCL.

114 Providing & fixing Concealed COCK 25 MM DIA Rate are inclusive of all matreials, 2.00 No 1233.57 RS: One Thousand Two

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as Hundred Thirty Three and

per the Instruction of Engineer In charge. The Model & Make of Concealed COCK Shall be Paise Fifty Seven only

as per the Approved Make List of GSPHCL.

115 Providing & fixing Stop Tap 15 MM DIA Rate are inclusive of all matreials, Labour & 9.00 No 665.51 RS.Six Hundred Sixty Five

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the and Paise Fifty One only

Instruction of Engineer In charge. The Model & Make of Stop Tap Shall be as per the

Approved Make List of GSPHCL.

116 Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are inclusive of all 34.00 No 990.61 RS.Nine Hundred Ninty and

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Paise Sixty One only

Specifications and as per the Instruction of Engineer In charge. The Model & Make of Bib

Tap Shall be as per the Approved Make List of GSPHCL.

117 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive of all matreials, 6.00 No 1309.39 RS: One Thousand

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as Three Hundred Nine and

per the Instruction of Engineer In charge. The Model & Make of Two way Bib Tap Shall be Paise Thirty Nine only

as per the Approved Make List of GSPHCL.

118 Providing and Laying G.I.Rain water spout of 50 mm Dia of required Length. 3.00 No 100.90 RS.One Hundred and Paise

119 Providing and fixing 600mm x 450mm beveled edge MIRROR of superior glass mounted 13.00 No 850.90 RS.Eight Hundred Fifty and

on 6mm thick A.C. sheet or plywood sheet fixed to wooden plugs with C.P. brass screws & Paise Ninty only

120 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour & Necessary 13.00 No 909.08 RS.Nine Hundred Nine and

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction Paise Eight only

of Engineer In charge. The Model & Make of Towel Ring Shall be as per the Approved

Make List of GSPHCL.

121 Providing & Fixing Towel Rod. Rate are inclusive of all matreials, Labour & Necessary 13.00 No 1078.70 RS: One Thousand Ten

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction Hundred Seventy Eight and

of Engineer In charge. The Model & Make of Towel Rod Shall be as per the Approved Paise Seventy only

Make List of GSPHCL.

122 Providing & Fixing SS Cloth Hanger (5 Hook) as per detail drawing and as directed by 19.00 No 249.84 RS.Two Hundred Forty Nine

Engineer In charge. Rate are inclusive of all material, Labour, Taxes. Samrat Brand as and Paise Eighty Four only

Description Total Qty Unit Rate Rate In Word Rs. Amount

123 Providing a I.S.I mark 7 levers three keys brass pad lock of Navtal ( Godrej ) make 65mm 16.00 No 243.64 RS.Two Hundred Forty

dia on completion of project. Three and Paise Sixty Four

124 Providing and fixing stainless steel ( 304 Grade ) 1mm thick Matt / Satin Finish Kitchen 1.00 No 3695.00 RS: Three Thousand Six

sink of over all Minimum size 533mmx 457mm X 203mm deep having bowl Minimum size Hundred Ninty Five only

470mm x 395mm x 203mm with cement mortar 1:3 etc.complete.Rate including of 32mm

dia.C.P.brass waste coupling and 32mm dia.rigid PVC waste pipe upto N.T.S.S.Kitchen

Sink Shall be used as per approved material list G.S.P.H.C.L

125 Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern fabricated from 5710.00 Kg. 75.12 RS. Seventy Five and Paise

M.S. flat,square bars, round bars,c-channel, square/round box pipe as per detail Drawings. Twelve only

Rate is inclusive of welding with grinding smooth surface, two coats of Oil paint and one

coat of yellow Zinc primer coat of approved brand only. Oil paint shall be used as per

Approved Material List By G.S.P.H.C the Structural Steel Shall be used only ISI mark only.

126 Providing and Laying Acrylic base (Zycosil or equivalent) Water Proofing paint 22.00 Smt 110.70 RS.One Hundred Ten and

treatment treatment in two coats of vertical and horizontal surface of depressed portion of Paise Seventy only

Bath/W.C. as directed by engineer in charge.This treatment shall be carried out over &

above water proofing plaster.

127 Suppllying and Filling Cinder in Sunk Portions for All Lead and Lift etc. Complete. 4.00 Cmt 791.68 RS.Seven Hundred Ninty

One and Paise Sixty Eight

128 Providing 10 mm thick cement PLASTER in single coat of interior plastering and 87.00 Smt 236.57 RS.Two Hundred Thirty Six

finished even and smooth in cement mortar 1:3 ( 1 cement : 3 sand ) and finishing with and Paise Fifty Seven only

floating coat of neat cement slurry including providing and mixing Water Proofing material

in C.M. in proportion recommended by the manufactures for Ground Floor .Mortar shall be

prepared by mixture machine only. for Ancillary For All Floor

129 Providing 10 mm thick cement PLASTER in single coat of interior plastering and 24.00 Smt 208.10 RS.Two Hundred Eight and

finished even and smooth in cement mortar 1:3 ( 1 cement : 3 sand ) and finishing with Paise Ten only

floating coat of neat cement slurry including providing and mixing Water Proofing material

in C.M. in proportion recommended by the manufactures for Ground Floor .Mortar shall be

prepared by mixture machine only. for Ancillary

130 Providing and Fixing of stainless steel 304 grade pipe ( Hand Rail ) railing top pipe of 2" 10.00 Rmt 911.03 RS.Nine Hundred Eleven

dia , vertical Support balustrade 1.5 " x1.5" at every max. 0.9 mt c/c, fixed with and Paise Three only

stone/concrete or brickwork & Finishing Seal as directed by engineer in charge. Rate are

inclusive of all aterial,labour,taxes&polishing.

Description Total Qty Unit Rate Rate In Word Rs. Amount

131 S.S. Railing. Providing and Fixing of Stainless Steel 304 grade Pipe Railing 0.90mt. 63.00 Rmt 3143.43 RS: Three Thousand

Height. Top Round Pipe (Baluster) of 2" dia. Vertical balustrade 1.5" x 1.5" at every max. One Hundred Forty Three

0.90mt. c/c and intermediate 3 nos. runners pipe mid rail of 1" dia. and S.S. base plate of and Paise Forty Three only

100 x 8mm. The Railing system shall be floor mounted with anchor fastener and base plate

of 100mm size having 8mm thickness completed as per detailed drawing & as directed by

engineer in charge. Rate are inclusive of all material, labour, taxes & polishing.

132 Providing & Fixing 9 nos. Curtain 3" M-hook (Stainless Steel) at Drawing Room Balcony 3.00 Job 175.78 RS.One Hundred Seventy

with All Labour & Material & Fittings etc Five and Paise Seventy

133 Providing & Fixing Door Eye Glass Ultra Clear 180 degree finish with Brass as per detail 3.00 No 248.31 RS.Two Hundred Forty Eight

drawing and as directed by Engineer In charge.Rate are inclusive of all material , Labour, and Paise Thirty One only

134 Provinding and fixing chicken wire mesh Jali 0.18 Gauge and 0.18mt wide with necessary 308.00 Smt 64.06 RS. Sixty Four and Paise

screws and nails to joint or crack between R.C.C. column and brick work etc. complete as Six only

per Engineer-in-charge.wire mesh jail Shall confrom to relevant is Specifiction

135 Making connection to existing water supply drainage line including necessary jointing 1.00 Job 1000.00 RS: One Thousand Ten

materials and finishing etc complete. Hundred only

136 Providing Supplying and Fixing Single Pipe Bracket System with U Bolt Rubber mounted 68.00 Each 182.83 RS.One Hundred Eighty Two

for Pipe Supporting Clamping System for External Vertical Fixed line with wall distance 3" and Paise Eighty Three

including nuts, bolts, fastners etc complete as per detailed Specifications and as directed only

by Engineer in Charge.

137 Providing Supplying and Fixing S4 Channel System (S4 Channel + Profile Bracket + U 88.00 Each 421.58 RS.Four Hundred Twenty

Bolt Rubber mounted System) for multiple Pipes for External Vertical Fixed line with wall One and Paise Fifty Eight

distance 3" including nuts, bolts, fastners etc complete as per detailed Specifications and only

as directed by Engineer in Charge.

138 Providing & fixing S.W. gully trap without C.I. grating brick masonary chamber & water 11.00 No 1176.94 RS: One Thousand One

tight C.I. Cover of size 300 mm x 300mm size with standard weight (1) square mouth trap Hundred Seventy Six and

150mm x 100mm size "P" or "R" type. Paise Ninty Four only

Description Total Qty Unit Rate Rate In Word Rs. Amount

139 Constructing brick masonry chamber for under ground C.I. inspection chamber and 26.00 No 3793.18 RS: Three Thousand

bends with brick having crushing strength not less than 35 kg./cm2 in C.M. 1.5 R.C.C. top Seven Hundred Ninty Three

slab with 1:2:4 mix (1 Cement : 2 coarse sand :4 graded stone aggregate 20mm size) with and Paise Eighteen only

8 mm dia steel at 15 cm,C/C and providing & Fixing R.C.C cover size cover 0.60x0.45x0.07

met with 40x40x5 mm angle.frame and foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat cment walls & bed

connect etc. complete rate inclusive of outside plaster of 15mm thick in cm 1:3 form top of

chamber and all side up to 45 cm deep below ground level.(A) Inside dimansions

455mmx610mm.and 450 mm deep for Single or multi purpose pipe line.

140 Extra over above Item No-139 for additional depth 0.10 mt. Or part there of beyond 450 46.00 No 239.99 RS.Two Hundred Thirty Nine

mm depth for brick masonary chamber for 455m x 610mm size. and Paise Ninty Nine only

141 Constructing brick masonary chamber for underground C.I.Inspection chamber and 14.00 No 5476.93 RS: Five Thousand Four

bends with bricks having crushing strength not less than 35 kg/Cm2 in C.M.1:5 R.C.C. top Hundred Seventy Six and

slab with 1:2:4 mix (1-cement:2-coarse sand:4-graded aggregate 20mm size ) with 8mm Paise Ninty Three only

dia TMT steel at 15 cm c/c both ways and providing and fixing precast R.C.C.Cover size

0.60 x 0.45 x 0.07m with M.S. angle frame. of 40 x 40 x 5mm foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc.complete rate are also inclusive of outside

plaster 15mm thick in C.M.1:3 from top of chamber and all side upto 15cm deep below

ground level.(i) Inside dimention 600mm x 850mm and 450mm deep for multy perposed

142 Extra over above Item No-141 for additional depth 0.10 mt. Or part there of beyond 450 18.00 No 322.37 RS.Three Hundred Twenty

mm depth for brick masonary chamber for 600mm x 850mm size. Two and Paise Thirty Seven

Description Total Qty Unit Rate Rate In Word Rs. Amount

143 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class SN8 Structured 155.00 Rmt 229.00 RS.Two Hundred Twenty

Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing Nine only

ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3

including all local and central taxes, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the departmental stores etc. complete.

(100mm ID Dia) Including Lowering, laying and jointing of class SN 8 structured wall (

External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings

with the help of coupler ( on line / off line ) attached with one end of pipes, sliding over the

elastomeric sealing rubber ring placed on the specified valley of the corrugation at the

spigot end, lowering the same into the trench, laying on the lower bedding (constructed at

bottom of trenches) at prescribed gradient,depth & alir wll bracket) fixture should be

provided with external separate Potted driver, latest Valid BIS approved Luminaire and

driver. The Fixture efficiency ≥ 90 lumens/watt only for safety and performance. (L70 @

30,000 Hrs.) The fixture should be able to easily mount on POP / Grid false ceiling. The

Luminiare should be tested as per IP 20 and followi

144 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class SN8 Structured 104.00 Rmt 396.00 RS.Three Hundred Ninty Six

Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric sealing only

ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces (Double

Wall) for non-pressure underground Sewerage & Drainage application as per EN:13476-3

including all local and central taxes, transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the departmental stores etc. complete.

(150mm ID Dia) Including Lowering, laying and jointing of class SN 8 structured wall (

External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings

with the help of coupler ( on line / off line ) attached with one end of pipes, sliding over the

elastomeric sealing rubber ring placed on the specified valley of the corrugation at the

spigot end, lowering the same into the trench, laying on the lower bedding (constructed at

bottom of trenches) at prescribed gradient,depth & alignment ,testing the water tightness of

the joints, ensuring the continuity tests of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including carriage of pipes & fittings from site

stacks to the place of laying etc. as per direction of Engineer-in-charge PipeAs Per

approved Material List By G.S.P.H.C .

Description Total Qty Unit Rate Rate In Word Rs. Amount

145 Providing & fixing Precast RCC cover for IC and MH chambers including MS angle frame 3.00 No 1932.00 RS: One Thousand Nine

of 40x40x5mm and CC 1:1.5:3 precast RCC cover including 8mm dia. TMT steel at 15 CM Hundred Thirty Two only

c/c both ways and oil painting to frame and handle including finishing of concrete with CM

(1:3) etc complete. Rates are inclusive of cost of angle frame, TMT steel, reinforcement,

concrete finishing work and two pieces of MS flate 25x3mm handle finished dimention of

RCC cover shall be 0.60 X 0.45 X 0.07 Mt.

146 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 138.00 Rmt 371.21 RS.Three Hundred Seventy

30cm length,30cm height and 15cm thick of M-250 grade concret as per approved design One and Paise Twenty One

and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 only

(1cement:3fine sand) etccomplete.

147 Providing and Fixing Precast Rubber Dye Interlocking Concrete block 60mm thick with 172.00 Smt 699.93 RS.Six Hundred Ninty Nine

grade of concrete M300 Puumatic compressed by Mechanically pressed and as per and Paise Ninty Three only

approved design including 75mm Sand layer for levelling and filling the joint with Sand in

proper line and level etc. complete.

148 Providing & Fixing cast iron steps of size 500x150mmx22.5mm and painting with two 10.00 No 205.60 RS.Two Hundred Five and

coats of Anti-corrosive paint etc.complete. Paise Sixty only

149 Box cutting the road surface to proper slope and camber for making a base for road work 130.00 Cmt 108.33 RS.One Hundred Eight and

including removing ther excavated stuff and disposing as on the road side slope directed Paise Thirty Three only

upto 50Mt. lead

150 Rolling and Consolidation water bound macadam including watering not exceeding 150 900.00 Smt 21.83 RS. Twenty One and Paise

mm thickness ( Main layers including binding materials) including filling in depressions Eighty Three only

which occurs during the process ( B) with power roller exceeding 8 tones and not exceeding

151 Providing,Laying and Fixing 25mm thick expansion joint by hydro cell semi-rigid UV 5.00 Smt 738.13 RS.Seven Hundred Thirty

resistance with high high performance laminated closed cell polythene foam joint filler in Eight and Paise Thirteen

sheet foam as directed etc. Complete only

152 Providing and fixing 25 mm diameter backup rod having minimum density 22 kg per cum 190.00 Rmt 17.62 RS. Seventeen and Paise

(ASTMD - 3575) & compression strength of 0.40 kg per sqm (ASTM - 5249) and finishing Sixty Two only

with polysulphide sealant etc. complete. For 20 mm wide expansion joint

153 Construction Of Concrete Road Using Trimix System Having of any Thickness M-300 114.00 Cmt 4675.17 RS: Four Thousand Six

Concrete Mix With Providing And Fixirs & Removing Of "C" Channel Having Size 75Mm. Hundred Seventy Five and

X75Mm As Per Required Level Slope And Thickness Of Concrete Road Fl Levelling Of Paise Seventeen only

Place Concrete With Surface Vibrator Machine, Dewatering System Device Finishing With

Power Floater Machine And Trowel Light Brooming On The Surface As Directed With

Providing Expansion Joint Size 20 X 190Mm Using Of Concrete Cutter Machine Including

Curing Etc. Complete.

Description Total Qty Unit Rate Rate In Word Rs. Amount

154 Providing & Making cutting in C.C Road including cleaning etc. Complete as per direction 70.00 Rmt 36.80 RS. Thirty Six and Paise

of Engineer incharge. Eighty only

155 providing & Fixing 30mm Dia backup rod of having minimum density 22KG per 30.00 Rmt 20.00 RS. Twenty only

Cum(ASTMD-3575) & Compression strength of 0.40 kg per sqm (ASTM- 5249) and

finishing with polysulphide etc. For 25mm wide Expansion joint.

156 Providingand laying Two level or slopes) and jointing reiforced concrete light duty, non 60.00 Rmt 249.72 RS.Two Hundred Forty Nine

pressure pipes I.S.Class NP-2 of the following diameter with collars and butt ends prepared and Paise Seventy Two

for collar joints, including testing of pipes and joints etc. complete. (E) 150 mm. Dia. only

157 Providingand laying Two level or slopes) and jointing reiforced concrete light duty, non 30.00 Rmt 294.37 RS.Two Hundred Ninty Four

pressure pipes I.S.Class NP-2 of the following diameter with collars and butt ends prepared and Paise Thirty Seven

for collar joints, including testing of pipes and joints etc. complete. (E) 250 mm. Dia. only

158 Supplying of Graded hand Broken stone aggregate for WBM Road of size 40mm to 63mm 30.00 Cmt 1049.14 RS: One Thousand Ten

including conveyance charges for any lead and lift. Hundred Forty Nine and

Paise Fourteen only

159 Spreading of graded hand broken stone aggregate for Soiling WBM road of size 40 mm to 30.00 Cmt 259.64 RS.Two Hundred Fifty Nine

63 mm. and Paise Sixty Four only

160 Supplying of Graded hand Broken stone aggregate for WBM Road of size 25mm to 50mm 30.00 Cmt 1004.26 RS: One Thousand Ten

including conveyance charges for any lead and lift. Hundred Four and Paise

Twenty Six only

161 Spreading of graded hand broken stone aggregate for Soiling WBM road of size 25 mm to 30.00 Cmt 259.64 RS.Two Hundred Fifty Nine

50 mm. and Paise Sixty Four only

162 Supplying of murram for binding material on WBM road of including conveyance charges 10.00 Cmt 296.90 RS.Two Hundred Ninty Six

for any lead and lift. and Paise Ninty only

163 Spreading blindage or road crust filling the gaps in metal and levelling to gradient & 10.00 Cmt 153.31 RS.One Hundred Fifty Three

Camber as directed.(i) Murrum and Paise Thirty One only

164 Providing, Supplying & Laying Granular Sub Base (GSB) by providing M.C. coarse graded 150.00 Cmt 1193.58 RS: One Thousand One

material, spreading in uniform layers with motor grader on prepared surface, mixing by mix Hundred Ninty Three and

in place method with rotavator at OMC and compacting with vibratory roller to achieve the Paise Fifty Eight only

desired density complete as per MORTH specification.

165 providing and corrogulated JSW pre coated sheet roofing fixed withh galvanised iron J or 330.00 Smt 1022.75 RS: One Thousand Ten

L hooks, bolts and Nuts 8 mm dia with bitumin and G.I. Limpet washer or G.I. limpet Hundred Twenty Two and

washer with white lead complete excluding the cost of Purlines , rafters and Paise Seventy Five only

trusses(0.60mm thick)

Description Total Qty Unit Rate Rate In Word Rs. Amount

166 Drilling of pilot bore hole in all strata by mud flush DR rig 250 mm diameter with lowering 100.00 Rmt 749.00 RS.Seven Hundred Forty

of pipes, including jointing, Nine only

welding etc. labour of cement slurry, sand and gravel packing and development of bore

with air compressor of required capacity vertically etc. complete bore shall stand up un-

ceased at least 71 hours complete.

167 Reaming of 250 mm diameter pilot bore including assembling, lowering, housing, casing 100.00 Rmt 461.00 RS.Four Hundred Sixty One

stainer pipes with gravel packing, clay packing etc. 550 mm diameter only

168 Manufacture, supply and delivery of ISI marked ERW M.S. pipes conforming to IS: 100.00 Rmt 2407.00 RS: Two Thousand Four

4270/2001 with latest amendment Hundred Seven only

Rates are exclusive of GST

169 Steel bent plate suitable to 250 mm diameter ERW pipes 50.00 No 90.80 RS. Ninty and Paise Eighty

etc. size 200 X 150 X 6 mm etc. complete. only

170 Supplying of Gravel selected size 4mm to 6 mm size at site of work etc. complete 5.00 Cmt 2029.00 RS: Two Thousand

Twenty Nine only

171 Supplying of Portland cement at store or site of work including all taxes, loading, 2.00 M.T 6302.00 RS: Six Thousand Three

unloading, carting insurance etc. complete Hundred Two only

172 Supply of Clamps made from M.S. plate with three holes on either sides with bolts and 1.00 Pair 2017.73 RS: Two Thousand

nuts and washers of standard and approved make size 900mm X 100mm X 16 mm flat Seventeen and Paise

suitable for 250mm diameter pipes etc. complete Seventy Three only

173 Supply of M.S. Bail plug having length of 0.45 m from medium class pipe suitable for 250 1.00 No 1054.48 RS: One Thousand Ten

mm diameter pipes etc. complete. Hundred Fifty Four and

Paise Forty Eight only

174 Supply of Bore Plug having 100 mm height made fromM.S. plate with three holes at equal 1.00 No 1150.12 RS: One Thousand One

distance on circumferences for nuts, bolts type locking arrangements of standard make Hundred Fifty and Paise

suitable for 250 mm internal diameter pipes etc. complete. Twelve only

175 Cement Sealing by means of mud pumps without cost of Cement etc. complete. 1.00 Job 13273.00 RS: Thirteen Thousand

Two Hundred Seventy Three

176 Supply of Clay balls size of 25mm to 35 mm diameter made from sticky clay etc. 5.00 Cmt 751.00 RS.Seven Hundred Fifty One

177 Development of each water bearing zone coming across up to the depth of bore well ( 1.00 Job 27777.00 RS: Twenty Seven

tube well ) of by lowering 100 mm diameter drop line and 32 mm diameter G.I. air line for Thousand Seven Hundred

each zone with suitable capacity Air Compressor up to availability of sand free discharges Seventy Seven only

178 Electro logging of bore as directed by the Engineer - in -charge etc. complete. 1.00 Hr 12000.00 RS: Twelve Thousand

179 Charges of Air Compressor capacity of 900CFM 200PSI etc. complete for 6.00 hours job 1.00 Hr 27330.00 RS: Twenty Seven

etc. complete Thousand Three Hundred

Description Total Qty Unit Rate Rate In Word Rs. Amount

180 Pumping test of the tube well by 70.00 H.P. submersible pump test with D.G. set for 72 1.00 Job 36607.00 RS: Thirty Six Thousand

hours etc. complete. Six Hundred Seven only

181 Geophysical survey for pin point for bore well including survey done by GSSWB 1.00 Job 14286.00 RS: Fourteen Thousand

department with ralay repail of pin point location including fees to GSSWB department & Two Hundred Eighty Six

Transporatation charges.. only

182 Making connection of galvanised Mild steel distribution branch with galvanised mild steel 1.00 Job 1500.00 RS: One Thousand Five

main 50mm to 80mm nominal bore by providing and fixing tee including cutting and Hundred only

threading the pipes complete.

183 Provinding and Laying - Flter media 300mm thick directed at the back of 37.00 Smt 613.54 RS.Six Hundred Thirteen

ambutments,returns and wing wall as per Detail specification. and Paise Fifty Four only

184 Providing & laying weep hole in Aburtments, and returns 80.00 Each 47.63 RS. Forty Seven and Paise

by using A.C. pipe of 100mm including laying in proper Sixty Three only

grede and jointing the completed as per detailed

185 Providing & Laying Lawn for Land Scapping including Watering the lawns and all labours. 150.00 Smt 150.00 RS.One Hundred Fifty

186 Providing & laying & fixing Tree Plant of various plants such as plantation rate are also 30.00 No 600.00 RS.Six Hundred only

inclusive of Maintaining the plant in give Condition at the time of Completion including Tree

guard etc. Complete

187 Supplying, installation testing and commissioning of the 'C’ class MS Pipe as per IS1239 28.00 Rmt 2581.50 RS: Two Thousand Five

for undegound installation with welded connection with tapering connecting pieces, short or Hundred Eighty One and

long bends, specials like sockets, union nuts, elbows, plugs, tees etc. complete to make Paise Fifty only

the system operative as required by LFA, the pipes will have to be laid and fixed in

trenches. The scope shall also include excavation, backfilling of soil, providing, warpping

and coating of pypkote (corrosion protection tape) with overlap of 15 to 20 mm) etc.

complete. The scope shall also include hydraulic testing at 1.5 times working pressure

before wrapping & coating. (100 mm pipe)

188 Supplying, installation testing and commissioning of the 'C’ class MS Pipe as per IS1239 6.00 Rmt 1910.39 RS: One Thousand Nine

for undegound installation with welded connection with tapering connecting pieces, short or Hundred Ten and Paise

long bends, specials like sockets, union nuts, elbows, plugs, tees etc. complete to make Thirty Nine only

the system operative as required by LFA, the pipes will have to be laid and fixed in

trenches. The scope shall also include excavation, backfilling of soil, providing, warpping

and coating of pypkote (corrosion protection tape) with overlap of 15 to 20 mm) etc.

complete. The scope shall also include hydraulic testing at 1.5 times working pressure

before wrapping & coating. (80 mm pipe)

Description Total Qty Unit Rate Rate In Word Rs. Amount

189 Supply and installation,testing and commisioning of CI Butterfly valves( heavy ) conforming 4.00 No 6101.15 RS: Six Thousand One

to IS 13095 ,PN1.6 tested to 1.5 times workingpressue with necessary companion Hundred One and Paise

flanges,bolts, nuts, gasketpacking, support and any other spares, including indicator for Fifteen only

open and shut position as per fire practice etc complete (B) 100 mm dia

190 Providing, fixing, testing and commissioning of non-return valve of following sizes 4.00 No 9945.68 RS: Nine Thousand Nine

conforming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as Hundred Forty Five and

required, (B) 100 mm dia Paise Sixty Eight only

191 Supplying, fixing single headed internal hydrant valve with instaneousbgun metal/stainless 4.00 set 6139.00 RS: Six Thousand One

stell coupling of 63mm dia with cast iron wheel ISI marked confirming to IS 5290 (type A) Hundred Thirty Nine only

withy blank gun metal/ stainless steel cap and chain as required (a)single headed Gun

192 Providing & fixing 63mm dia RRL hose pipe as per IS 636 TYPE A of 15 mtr. standard 4.00 set 3916.23 RS: Three Thousand

length of approved pattern and size including gun metal male and female Coupling Gun Nine Hundred Sixteen and

Metal Only Paise Twenty Three only

193 Fire Hose Cabinet (size 600x 450 x 250mm) Providing, Fixing, Testing, & Commissioning 4.00 No 3453.00 RS: Three Thousand

of weather proof standard fire hose cabinet stand mounting type having single opening with Four Hundred Fifty Three

M.S. Fabricate stand, cabinet make with min 18 gauge MS sheet. Necessary locking only

arrangements . Rates are inclusive of all taxes.

194 Supplying and fixing First Aid hose reel with MS construction spray painted in post office 4.00 No 7920.84 RS: Seven Thousand

red, conforming to IS 884 with upto date amendments, complete with the following as Nine Hundred Twenty and

required. 30m long 25mm (nominal internal) dia water hose thermoplastic (textile Paise Eighty Four only

rainforced) type-2 as per IS: 12585 25mm (nominal internal) dia S.S.Shut up valve &

nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with

stop valve (GM) & M.S. pipe. and socket 30mt.

195 Supply, Installation, Testing & commissioning of 25mm dia gun metal ISI mark Gate Valve 4.00 No 608.08 RS.Six Hundred Eight and

with 25mm dia nipple as complete as directed. Paise Eight only

196 Design Supply and installation of safety sinages made of Zince sulphied base glow in the 896.00 sq inch 7.95 RS. Seven and Paise Ninty

Dark Rigid Sheet with high luminiues properties inclusing transparent weather proof U/V Five only

stabilized plastic pasted on 2mm, 3mm thick clear acrylic sheet Emergency exit Do not use

Lift in Case of Fire Floor Marking fire lift stair Exit hydrant point fire extinguisher Fire Alarm,

Description Total Qty Unit Rate Rate In Word Rs. Amount

197 Getting provisional NOC and Final NOC and Renewal of NOC (During Defect Liability 1.00 Job 16950.00 RS: Sixteen Thousand

Period) for Fire Hydrant,Sprinkler system, Fire Extinguisher, Fire alarm system etc. from Nine Hundred Fifty only

local fire authority or any other relevant statutory authority at initial stage and required

various other stages of construction work, including preparation of reports/drawings as per

fire authority requirement. Rate also includes renewal of Fire NOC during

defectliability........

............ period as per requirement. Main agency has to give demonstration of all fire

system to fire officer police / concern beneficiaries & GSPHCL. Agencyhas to submit FDR

of approved bank as per clause 2.0, section 3, of Rs 20000.00 Or Quoted rate which ever

is higher to GSPHCL for minimum maturitperiod of Four yearsin favour of GSPHC, which

will be released after Successful Submitting of All Fire NOC

atthecompletionofdefectliabilityperiod.Renewal Fire .N.O.C. shall be submitted final

S.D.proposal.Agency hasto bornecharges like...........

........... preparing and submission of allthe documents,Photographs,CD/DVDrequired

togetthe N.O.C. from concern fire department and also liaisoning work with concern

departments. Main civil agency has to get the pre-NOC from fire & emergency department

well beforestarting civil & the fire hydrant work including sump & pumproom work. For that

professional & experience fire agency has to prepare drawing of fire hydrant system,

sprinkler system, fire alarm system, DGset etc. as per tender item and making floor layout

of all fire pump panel, cable earthing etc in pump room. If any changes required...........

............... in drawings of sump & pump room. Main agency has to inform in written before

excavation of pump & sump room. Agency has to calculate the total head & discharge

required as per NBC/local fire office requirement and as per sitesituation and submit fire

pump OEM specification curve foundation detail etc & get approval of cable, panel

drawings & specification. After completion of fire hydraunt related work as per pre-NOC,

tender specification & drawing approved by fire department, ...........

.............agency has to do site visit with fire department & give the testing & demonstration

to fire officer & get the final NOC before handing over of the building. Agency has to give

live testing & demonstration of all system to GSPHCL & police department jointly. For fire

NOC fee separate item is taken in tender. Agency has to quote the rate as per latest

Gazettein respective tender item.

Total Civil Amount

Description Total Qty Unit Rate Rate In Word Rs. Amount

198A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper 150.00 Point 605.00 RS: Six Hundred Five

PVC insulted FRLS-H wire with 1.5 sq. mm (green) copper PVC insulated FRLS-H wire for only

earth continuity in FIA approved ISI mark medium class white colour 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected on/in Brick

Wall / slab along with continuous G.I. fish wire to draw wires and laid in approved manner

zari for PVC pipe and boxes shall be filled with cement mortar and finishing the surface to

match the wall / ceiling complete with approved make 5/6 Amp. ISI mark modular type

switch and accessories mounted in 20 G. G.I. company fabricated metallic box covered

with appropriate front plate modules e..............

............rected flushed with wall / ceiling with necessary modular lamp holder / modular

ceiling rose / HD Connector 75 mm deep GI box as per requirement ( make & model

approved by EIC and matching colour with switches accessories) as directed for concealed

wiring. Light point. Cat.-III.(Conductor resistance should be as per IS:8130/1984 )

Necessary sheet cover must be erected on all box to prevent mortar going into the box.&

for ceiling light Point use deep Junction box of same PVC Pipe make . Length of point

wiring must not increase than 10 mtr. For that necessary switch boards and their........

.................. locations must be finalised before execution by agency otherwise payment will

not be done for extra long point. (For future extention, if required, agency has to erect one

higher size metal box and modular plate as per instruction of EIC. Cost of blank plate shall

be paid as per tender item) [Wire must be having box packing][This item include

cleaning(inside/outside) of all GI switch boards,electric point box,fan box & box cutting

plaster arround modular plate without any gap] (Light Point Cat-III)

198B For Two Way Controlled Light Point, Cat.-III 10.00 Point 753.00 RS: Seven Hundred

Fifty Three only

198C For Secondary Light Point Cat.-III 15.00 Point 208.00 RS: Two Hundred Eight

198D For Bell Point, Cat.-III 10.00 Point 605.00 RS: Six Hundred Five

198E For Fan Point (with 6 A. Modular type switch and two module hum free EME Rotary Five 30.00 Point 842.00 RS: Eight Hundred

step type electronic fan regulator both having ISI mark) Cat.-III Forty Two only

198F For Two way controlled Fan point (with 6A Modular type switch and Two Module hum free 6.00 Point 990.00 RS: Nine Hundred Ninty

5/6 step EME step type Electronic fan regulator both having ISI Make ) Cat-III only

198G For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat. III 22.00 Point 636.00 RS: Six Hundred Thirty

198H For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) 65.00 Point 306.00 RS: Three Hundred Six

Description Total Qty Unit Rate Rate In Word Rs. Amount

199 Providing and erecting modular type accessories mounted on 20G G.I. company fabricated 5.00 Each 788.00 RS: Seven Hundred

galvanised metal box covered with approriate front plate modules erected flushed with Eighty Eight only

wall/Ceiling with 1 Nos. TV Socket,1 Nos. of 16 Amp SP Switch & 3 Nos. of 6 Amp 3/5 pin

plug. [For TV Switch board] Cat III

200 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x 2.5 15.00 Point 930.00 RS: Nine Hundred

sq.mm copper PVC insulated FRLSH wire with 1.5 sq.mm (green) copper PVC insulated Thirty only

FRLS wire for earth continuity in FIA approved ISI mark white colour medium class 20/25

mm dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected in

wall/slab along with continuous G. I. fish wire to draw wires and laid in approved manner

zari for PVC pipe & boxes shall be filled with cement mortar & finishing t...........

.........he surface to match the wall / ceiling complete with 16 Amp Modular type Swich and

accessories mounted in 20 G. GI company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall. (a) 16 Amp. Indicator switch &

No. 6/16 A universal socket white colour suitable for 3/5 pin top duly both having ISI mark.

(Necessary sheet / tape / polythene / sand must be erected or filled in all box To Prevent

Mortor Going In To The Box) Cat.-III. (Conductor resistance should be as per

201 Providing & Erecting Plug Point wiring with approved ISI marked 1.1 kv grade 2 x 4.0 25.00 Point 1087.00 RS: One Thousand

sq.mm copper PVC insulated FRLSH wire with 2.5 sq.mm (green) copper PVC insulated Eighty Seven only

FRLS wire for earth continuity in FIA approved ISI mark white colour medium class 25 mm

dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected in wall /

slab along with continuous G.I. fish wire to draw wires and laid in approved manner. zari for

PVC pipe & boxes shall be filled with cement mortar & finishing the surface to match the

............ceiling complete with approved make 20 Amp. Modular type indicator switch and

accessories mounted in 20 SWG GI company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall / ceiling. (a) 20 Amp Indicator

switch & 1 No. 20 A universal socket white colour suitable for 3 pin top duly both having

ISI mark (A.C POINT ONLY) CAT III (Necessary sheet / tape / polythene / sand must be

erected or filled in all box to Prevent Mortor Going In to The Box)

202 Providing following type of Modular Type Accessories mounted with 20 G company 142.00 Each 25.00 RS: Twenty Five

fabricated metalic box, single mounting base frame covered with textured / metallic front only

plate, modules erected with necessary connection. As desired by Engineer in charge. Blank

Plate Single Cat.-III

Description Total Qty Unit Rate Rate In Word Rs. Amount

203A Providing & Erecting Mains with approved make FRLS-H PVC Insulated wire ISI marked 550.00 Mtr. 81.00 RS: Eighty One

1.1 KV grade with FIA approved ISI mark medium class 20/25/32 mm dia. embossed rigid only

PVC pipe with same company PVC fitting fixed with adhesive solution to be erected on/in

brick wall / slab along with continuous G. I. fish wire to draw mains Zari work & plastering

by cement mortar & finishing the surface to match the wall / ceiling complete (Conductor

resistance should be as per IS:8130/1984 ) [a] 2 x 1.5 sq.mm. FRLS-H copper multi

stranded conductor mains with 1.5 sq.mm. FRLS-H copper multi stranded conductor for

earthing as per standard colour code. (with 20 mm dia. PVC pipe) [Wire must be having

203B For 2 x 2.5 sq.mm. FRLS-H copper multi stranded conductor mains with 1.5 sq.mm. FRLS- 200.00 Mtr. 108.00 RS: One Hundred Eight

H copper multi stranded conductor for earthing as per standard colour code. (with 20/25 only

mm dia. PVC pipe as per requirement) [Wire must be having box packing] (Conductor

resistance should be as per IS:8130/1984 )

203C For 2 x 4.0 sq.mm. FRLS-Hcopper multi stranded conductor mains with 2.5 sq.mm. FRLS- 110.00 Mtr. 148.00 RS: One Hundred Forty

H copper multi stranded conductor for earthing as per standard colour code. (with 20/25 Eight only

mm dia. PVC pipe as per requirement) [Wire must be having box packing] (Conductor

resistance should be as per IS:8130/1984 )

203D For 2 x 6.0 sq.mm. FRLS-H copper multi stranded conductor mains with 2.5 sq.mm. FRLS- 300.00 Mtr. 183.00 RS: One Hundred

H copper multi stranded conductor for earthing as per standard colour code. (with 25 mm Eighty Three only

dia. PVC pipe as per requirement) [Wire must be having box packing] (Conductor

resistance should be as per IS:8130/1984 )

204A Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) 300.00 Mtr. 24.00 RS: Twenty Four

RIGID PVC PIPES of following size complete erected with necessary PVC fittings & only

Junction boxes fixed with adhesive solution & clamps on / in wall / ceiling along with

continuous fish wire to draw mains with necessary fittings and junction boxes for following

dia. 20 mm. dia.

204B For 25 mm. dia. 250.00 Mtr. 33.00 RS: Thirty Three

204C For 32 mm. dia. 60.00 Mtr. 54.00 RS: Fifty Four only

205 Providing & erecting following size of TV Co-axial flexible cable comprising inner conductor 252.00 Mtr. 39.00 RS: Thirty Nine

of solid bare copper insulated with Foam PE & Secondary conductor made of poly - only

Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC

insulation.[b] RG-6 [Polycab/ Finolex / RR Kabel Make]

206 Providing & fixing 20 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with necessary 100.00 Mtr. 31.00 RS: Thirty One

socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. only

Description Total Qty Unit Rate Rate In Word Rs. Amount

207 Providing & fixing 25 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with necessary 101.00 Mtr. 37.00 RS: Thirty Seven

socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. only

208 Supplying and erecting M.S./G.I. metal box having 16 Gauge painted with red oxide be 1000.00 Sq. Inch 5.94 RS: Five and Paise

concealed in wall with necessary plastering & finishing with 3 mm thick laminated sheet Ninty Four only

with grooving as directed of following depth 3" depth.

209 carry out RCC Core cutting- up to 100 mm dia./200mm thick Wall/beam/slab with providing 4.00 job 1188.00 RS: One Thousand One

PVC pipe of 3 mm thick inside and necessary finishing on both ends of wall Hundred Eighty Eight

210 carry out RCC Core cutting- up to 100 mm dia./300mm thick Wall/beam/slab with providing 2.00 job 1534.00 RS: One Thousand Five

PVC pipe of 3 mm thick inside and necessary finishing on both ends of wall . Hundred Thirty Four only

211 Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 Star rated, 30.00 Each 2603.00 RS: Two Thousand Six

Max. 30Watt Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Hundred Three only

Motor, class of insulation: B/E, Double ball bearings, Rust free 3 nos.Aluminium blades,

nos. canopies, shackle kit with earthing provision, copper winding, Power factor not less

than 0.9, Service Value (CMM/W) minimum 7.5, Air delivery minimum 220 CMM, Minimum

345 RPM,230v (tolerance as per IS : 374 2019), THD less than 10%, compitible wit..........

............h electronic regulator unit for Five Speed Control and all remaining accessories

including safety pin, nut bolts, washers, temperature rise equal to 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.Down road:

up to 1.0 mtr as per site requirment.

(A) 1200 mm Sweep (48") ( Make Havells Efficiencia Dx , Bajaj Energos 28 & Crompton

make & model approved by EIC suject to above specification )

212 Supplying and erecting Fan hook of 10 mm M.S. round bar bounded to the RCC bars up to 40.00 Each 125.00 RS: One Hundred

50 mm length each side and pierced through a 16 Gauge M.S.box having depth of 75 mm Twenty Five only

complete erected concealed in ceiling with necessary Modular type round plate.

213 Supplying & erecting approved make low noise Decorative exhaust fan having size 150/200 10.00 Each 1353.00 RS: One Thousand

mm with 1350 RPM with round / square frame ABS/metalic body with Grill / inbuilt Three Hundred Fifty Three

lowers.(Make & model approved by EIC) only

214 Supplying and erecting approved make oscillating type bracket fan A.C. 230 V. 50 Hz, 2.00 Each 2509.00 RS: Two Thousand Five

400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete Hundred Nine only

with guard, flexible Core plug top complete erected with lead wires as directed. (Crompton

Make High Flow model)

Description Total Qty Unit Rate Rate In Word Rs. Amount

215 Supplying and Erecting LED indoor fitting of approximately 4feet long with LED of wattage 30.00 Each 370.00 RS: Three Hundred

0.2W to 0.5W assemble on single MCPCB with housing use as a heat sink shall be made Seventy only

from Aluminum extrusion having enough strength (sample must be approved by EIC)with

polycarbonate diffuser with following specification: (A) Company mark/name on the

fitting.(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.(C) Rated input

wattage: max. 24w(D) Rated input current : 0.2 Amp(E) Power Factor : Min. 0.90(F) ATHD

.................15%(G) Rated Luminous flux: Min. 2420 lm(H) CCT: 6500K(I) CRI: Min. 80Ra(J)

Driver Efficiency: Min. 80%(K) LED life span: Min. 50000 Hrs @ L70(L) Over Voltage

protection: Withstand up to 440V/AC for 4 Hrs.(M) Surge protection : Min. 2KV(N) IP rating:

IP 20(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing clamp min. 12mm wide heavy duty design & strength should be sufficient to hold

the fitting erected on wall or ceiling.& Fitting length should be min. 1100mm (R) 3 core x

sqmm copper wire of with min. 1 ft (300mm) earthing connector, ..........

.........Diffuser shap must be OMEGA/Mashroom & Al. base must be powder coating.

(Note: The manufacturer/ authorized Channel partner of the manufacturer has to submit

5 yrs free replacement Guarantee for complete Fixture)(Model approved by Engineer in

Charge subject to above Specification.)[Approval will be given strictly subject to item

Description Total Qty Unit Rate Rate In Word Rs. Amount

216 SITC of Indoor Commercial Recess / Surface mounted (IP20) maximum 18 W Cool/Natural 25.00 Each 1027.00 RS: One Thousand

white/Warm white Color LED Down lighter office Lighting Luminaire with separate potted Twenty Seven only

driver with single piece pressure die cast aluminium alloy housing with corrosion resistant

powder coated finish with PMMA/PS/Injection moulded Polycarbonate diffuser with high

brightness LED complete (LED approx.6K/4K from Philips Lumileds, CREE, Nichia,

Bridgelux, Seoul & Osram) CRI > 80, CCT 5600K (5400 to 5800K bin). The LED's should

be mounted on back lit metal core PCB for better heat conduction and long life of LED. The

Fixture should comply all International Standarad third party (LM 79 for complete fixture,

LM80 for individual LED). The Fixture have protection like miswiring, over voltage, over

load, wrong wiring, THD < 15%,, P.F > 0.95, efficiency ≥ 100 lm/w & driver efficiency >

85%. For 18 W fixture wide voltage range from 180 V to 270 V, 50/60 HZ @ 240V

application, 4 KV surge protection.

The fixure must have min. 1800 lumen ligr wll bracket) fixture should be provided with

external separate Potted driver, latest Valid BIS approved Luminaire and driver. The

Fixture efficiency ≥ 90 lumens/watt only for safety and performance. (L70 @ 30,000 Hrs.)

The fixture should be able to easily mount on POP / Grid false ceiling. The Luminiare

should be tested as per IP 20 and following test reports should be submitted at the time of

approval: heat resistant test, thermal test, Ingress protection test, drop test, Photobiological

report with 3 core X 1.0 Sq.mm. flexible wire as per site requirement [Note:-The

manufacturer / authorized Channel partner of the manufacturer has to submit 5yrs. free

replacement Guarantee for complete Fixture

217 SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W Cool/Natural 40.00 Each 1159.00 RS: One Thousand One

white/Warm (6K/4K) white Color back lit LED Down lighter with BIS approved separate Hundred Fifty Nine only

potted driver with single piece pressure die cast aluminium alloy housing (no plastic part

allowed) with corrosion resistant powder coated finish with PMMA/PS/Injection moulded

Polycarbonate diffuser with high brightness LED complete (LED from Philips Lumileds,

CREE, Nichia, Bridgelux, Seoul & Osram) CRI > 80, CCT 6K/4K. The LED's should be

mounted on back lit metal core PCB for better heat conduction and long life of LED. Test

Description Total Qty Unit Rate Rate In Word Rs. Amount

..............report of shall be submitted (LM 79 for complete fixture, for individual LED). The

Fixture have protection like miswiring, over voltage, over load , IP20 wrong wiring, THD <

15%,, P.F > 0.95, efficiency ≥ 100 lm/w & driver efficiency > 85%. For 24 W fixture wide

voltage range from 180 V to 270 V, 50/60 HZ @ 240V, 4 KV surge protection.

The fixure must have min. 2400 lumen light output. The fixture should be provided with

external separate Potted driver, latest Valid BIS approved Luminaire and driver. The

Fixture efficiency ≥ 90 lumens/watt only for safety and performance. (L70 @ 50,000 Hrs.)

The fixture should be able to easily mount on POP / Grid false .......

.............ceiling. The Luminiare should be tested as per IP 20 and following test reports

should be submitted at the time of approval: heat resistant test, thermal test, Ingress

protection test, IK test, Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as per

site requirement [Note:-The manufacturer / authorized Channel partner of the manufacturer

has to submit 5 yrs. free replacement Guarantee for complete Fixture

218 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 30.00 Each 111.00 RS: One Hundred

voltage, minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate Eleven only

diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps

integral type, with PC diffuser suitable LAMP holder

219 Providing and erecting max. 10 watt LED battern having main housing aluminium extruded 22.00 Each 309.00 RS: Three Hundred

& front cover of polycarbonate. Electrically & photomatry parameters are as undr: 240 V, 50 Nine only

Hz, System wattage 10 w ± 10 %, PF ≥ 0.95, system luments min. 1000, CCT- 3000K to

6500K, CRI ≥ 80, THD ≤ 15%, delivery efficiency ≥ 85%, L80 Certified LED, 30000 hrs. @

L70, Electronic CC driver, insulated copper wire for internal wiring, IP20, operating voltage:

160 to 270 V, Surge - 2 KV,Fixing clamp min. 12mm wide heavy duty design & strength

should be sufficient to hold the fitting erected on wall or ceiling,Length of fitting should be

min. 600mm, 3 core x 1.0 sqmm copper wire with min 1 ft (300mm) earthing

connector,Diffuser shap must be OMEGA/Mashroom & AI. base must be powder coating.

220 Providing and erecting Polycarbonate body surface mounting LED Bulk head type 9 watt 8.00 Each 780.00 RS: Seven Hundred

Lighting Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen Eighty only

output from luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool white (3000 to

6500 k), inbuilt driver having efficiency >=80lm/w, -20 deg C to + 60 deg C working

temperature, AL frame with Beam Angle 120 deg.

Description Total Qty Unit Rate Rate In Word Rs. Amount

221 Providing and erecting Decorative Ding Dong call bell Stereo type 250 Volt complete 8.00 Each 170.00 RS: One Hundred

erected on existing polished wooden block or in M.S. box with 3 mm thick white ISI mark Seventy only

laminated sheet. (Anchor (chime), Vision, Rider make)

222A Supplying and erecting approved make GRP / FRP Ladder type Cable Tray 40.00 Rmt. 493.00 RS: Four Hundred Ninty

Material – Corrosion Resistant Polyester Flame Retardant U.V. Stabilized Resin System - Three only

Manufactured from Pultruded Sections - Polyester Resin System, Glass Content : 55 –

% - Thickness- Rung Sq. Hollow Tube 25mm x 25mm - Fixing of Rung to Side Rail with

Thermoplastic Pin & Epoxy Adhesive, Assembly Single Stroke 3 Mtr. Length- Rung

Spacing – 300mm - Length of Tray: 3000mm- Support Span – 2500mm, Deflection L/200

or < 10mm whichever is less - Specification Followed NEMA FG1 1993- UV Resistant -

Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low Flammability - Oxygen

..............– Minimum 30% as per ASTM D 2863 Flame Spread (Extent of Burning) – 20mm

as per Standard ASTM D 635 - Tensile Strength – 4000 – 8000 Kg/Cm2 as per Standard.

In Three meter cable tray length atleastNosClamps with required accessories with two coat

of yellow primer and two coat of branded black colour and to be erect for mounting cable

tray with following:

Clamp MOC: M.S. For Vertical Cable Tray Installation :

C Clamp Size: 150 mm X 75 mm (LXD) ,25mm X 5 mm(BXT)

Groove Size in Clamp: 30mm X 8mm(LX B)

Hole for mounting clamp: 8 mm

Justi Khila for Mounting ........

..............Clamp: 100 mm(L) X 8/10 mm(Dia), Min. 2 Nos

Bolt Size: M8 X 25mm(L) SS for Cable Tray Mounting, Per clamp 4 nos.

For Horizontal Cable Tray Installation :

As per site requirement and design given by torrent power /GEB /EIC. Prepare T Clamp,

C lamp, L Clamp of required size length, broad and thickness for carrying LT cable of

various size wihout any saging.

(Note: In this item Cable Tray Clamps & its accessories rates are included

(A) Width 150 mm, Side Member “C” Section : 75 x 25 x 25mm with 4mm Thickness,

Loading 30Kg./Mtr. With Concentrated Load 70Kg. at center of the span

222B (B) Width 300 mm, Side Member “C” Section : 100 x 35 x 35mm with 4mm Thickness, 40.00 Rmt. 636.00 RS: Six Hundred Thirty

Loading 60Kg./Mtr. With Concentrated Load 70Kg. at center of the span Six only

Description Total Qty Unit Rate Rate In Word Rs. Amount

223 Providing, erecting, fabricating the M.S. structure as per requirement of site as per 200.00 kg 77.00 RS: Seventy Seven

structure design Including proper size approved by EIC of M.S. angles, flats, bars, square only

pipe, channels, sections (Tata,Zindal,Asian,Jsi Make) complete with cutting, welding,

grinding and finishing duly painted with Asian/Nerolac make premium quality oil paint and

true care red oxide metal primer,asian paint make with erection on site as per direction of

engineer in charge with necessary grouting cementing, plastering and finishing complete.

All hole opening of square pipe end must be closed with M.S plate welding. Payment will be

done on KG as per Actual weight.

224 Supplying & erecting 12 mm thick backelite sheet of approved make and grade on 25 x 25 3.00 Sq. Mtr. 2289.00 RS: Two Thousand Two

x 3 mm red oxide painted angle iron frame suitable for fixing ICDP SWITCH and energy Hundred Eighty Nine

meter (contractor shall make approved drawing of Bakelite sheet To arrange required No. only

of Energy meter & ICDP switch -busbar etc. as per Actual space available in electrical

225 Providing ad erecting approved make single phase Double Door metal clad D.B. as per 7.00 Each 6255.00 RS: Six Thousand Two

relevant indian standards ammended upto date. Supplying and fixing following way single Hundred Fifty Five only

phase MCB distrubution board of company fabricated with sheet box with powder coated

inside and outside after apply seven tank chemical process of 1.2mm thick CRCA sheet

cover (Door, Back side & body of MCBDB) complete with suitable integral single piece

construction tinned copper busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB.Manufacturer must be provided (1) IP

and as per IS:8623 1 & 3, IEC 61439 1 & 3 having..............

........... D type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned

Copper/Brass make neutral & Earthing link with isolation & Protecting Cover for 240 Volts

on surface / recess complete with loose wire box, terminal connectors for all incoming and

outgoing circuits, with suitable size FRLS PVC insulated copper conductor up to terminal

blocks and internal connection, tinned coppper bus bar, 1 no. tinned copper neutral link,

tinned copper earth bar, din bar, detachable gland plate, interconnections, powder painted

including earthing etc. Single phase incoming and horizontal single phase outgoing. For

Way MCBDB: Including 40 Amp. 30 mA double pole ELCB ..........

Description Total Qty Unit Rate Rate In Word Rs. Amount

..............(ELCB confirming to IS:12640/1988 having sensitivity of 30 mA and breaking

capacity of 10 KA), MCB 40 Amp. double pole switch (C curve confirms to IS:8828 having

breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL suitable to

operate on 240 Volt A.C. power. (6 to 25 Amp 12 Nos.) (The DBs should be used of same

company of MCB / ELCB to be used) (MCBDB must be erected in line & level with spirit

level and finish the external edge...........

.......... with box cutting plaster) (Same colour MCB(SP/DP) should be used as same as

MCBDB) [Including Necessary numbering / marking on box done with red colour radium

sticker as per site requirement and instructions given by EIC on site. Font / number size

given by EIC on site as per requirement] Single phase incoming and horizontal single

phase outgoing.

226 Desiging,fabricating,testing electrical panel (switch board) at manufacuturer's workshop 4.00 Sq. Mtr. 21500.00 RS: Twenty One

and Providing & erecting at site. Panel should be weather proof, dust & vermin proof, floor Thousand Five Hundred

mounted front operated cubical panel board having IP-54 made from 2 mm. thick CRCA only

M.S. sheet for outer body,gland plate & doors, 1.6 mm. thick CRCA M.S. sheet for internal

partitions with necessary supporting angles, flats including skirting, bending, drilling,

welding, riveting with internal partitions & cable alley,rubber gromets, rib, control wires,

backelite control fuses as per requirements,sufficient nos. of hinges for doors, door locking

arrangement, rubber gasket complete with Required Nos. heavy Duty Connector with

Cadmium plated nut ...........

................and bolt for Anti rusting and Al.busbar for earth, nuts/bolts,washer etc as per

instruction of engineer-In-Charge. Cost of supplied item like switchgears, LED indicator

,CTs , busbars and PVC FRLS copper wire with suitable size for power

interconnection,measuring instruments, foundation flange-bolts-base plates, cost of C

channel/angle iron stand (1ft to 2ft height as per cable size)shall be excluded of panel

fabrication.Specification of suppiled items is attached seperatly.The panel shall be supplied

with Seven Tank chemical process. which shall be carried out before applying painting,

painted with powder coating. (The rates excludes the cost of switchgears, busbars............

......, interconnecting mains & Copper / Aluminium strip, fuse, meters etc. The dimension

shall be measured excluding base beams.switchgear of approved brand and specification

shall be used and erected at CPRI approved panel manufacturers only. Busbar

compartment must be separate for easy termination of tails/cables and to avoid least

distance of punching holes in busbar. Panel depth shall be 350 mm.

Description Total Qty Unit Rate Rate In Word Rs. Amount

0 Panel manufacturer have to give 4 years service support if in case of breakdown or fault. 0.00 0 0.00 0.00

Panel manufacturer have to submit electrical meter calibration report. Agency should

design the panel in such a way that there should not be any excess in panel area (sq.mtr) &

length of bus-bar (mtr), if any excess is need to be done agnecy has to draw attention to

GSPHCL at the time of approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra and skill work force under

supervision of electrical engineer and guidelines given by manufacturer to avoid damage to

Size of door and Ele. ..........

...........room / Pump room shall be measure and provide to panel manufacturer to prepare

GA drawing considering the size of electrical room/pump room door and also inside size of

it. Agnecy has to co-ordinate with civil agency for giving proper dimenssion of electrical

room/pump room to accomodeted panel easily.[Including Necessary numbering / marking

on PANEL done with red colour radium sticker as per site requirement and instructions

given by EIC on site. Font / number size given by EIC on site as per requirement] (See

attached details specification of panel & manufacture also while quoting rate.

[Manufacturer must be of Gujarat state so three stage inspection can be done if required

and service support]

227A Supplying and erecting tripple pole & neutral 440V / 500 V Panel mounting Copper Busbars 3.00 Rn. Mtr. 1942.00 RS: One Thousand Nine

with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / Hundred Forty Two only

sq.mm (Rated current / cross section area) duly wraped with colour insulating tape for

phase sequence of following current carrying capacity, erected with necessary bus bar

supports / insulators, main cable socket to each bar, erected in existing cubical panel with

necessary connections.For electrolyte copper busbars Suitable for 100 Amp. capacity.

227B .For electrolyte copper busbars Suitable for 200 Amp. capacity. (For C Cat Ele.Room 2.00 Rn. Mtr. 3171.00 RS: Three Thousand

Busbar ) One Hundred Seventy One

227C For electrolyte copper busbars Suitable for 300 Amp. capacity. 2.00 Rn. Mtr. 4861.00 RS: Four Thousand

Eight Hundred Sixty One

228 Providing and erecting in existing fabrication panel Approved make Four pole moulded 1.00 Each 7395.00 RS: Seven Thousand

case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current Three Hundred Ninty Five

rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. only

supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in

with 16 G.M.S. housing.ICS=100% of ICU only

Description Total Qty Unit Rate Rate In Word Rs. Amount

229 Providing and erecting in existing fabrication panel Approved make Four pole moulded 3.00 Each 6723.00 RS: Six Thousand Seven

case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current Hundred Twenty Three

rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. only

supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing.ICS=100% of ICU only

230 Providing and erecting in existing fabrication panel Approved make Four pole moulded 1.00 Each 17667.00 RS: Seventeen

case circuit breaker having breaking capacity ICU of 35 K.A. at 415 V having normal Thousand Six Hundred Sixty

current rating of upto 200A. with variable thermal & magnetic release suitable to work on Seven only

A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing. ICS=100% of ICU only.

231 Providing and erecting in existing fabrication panel Approved make Four pole moulded 2.00 Each 8774.00 RS: Eight Thousand

case circuit breaker having breaking capacity ICU of 35 K.A. at 415 V having normal Seven Hundred Seventy

current rating of upto 125 A. with variable thermal & magnetic release suitable to work on Four only

A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected

in existing 16 G.M.S. housing. ICS=100% of ICU only.

232 Providing and erecting following additional parts for panel mounting MCCBs (A) Extended 3.00 Each 952.00 RS: Nine Hundred Fifty

operating rotary handle with pad lock with three position trip, off , on suitable for 25A to 250 Two only

A panel mounting

233 Supplying and erecting Approved make Earth fault Relay suitable to mount with inter 1.00 Each 5105.00 RS: Five Thousand One

connection to moulded case circuit breaker having CT ratio & MCCB rating as following Hundred Five only

along with shunt trip 220 V AC with all internal connections & complete erected in existing

M.S.housing.63 A., CT Ratio 1/100

234 Providing & erecting Miniature circuit breaker single pole 6 Amp. to 25 Amp. suitable to 3.00 Each 122.00 RS: One Hundred

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in Twenty Two only

existing box. confirming to IS 8828/1996 with ISI Mark.

235 Providing & erecting 240 V MCB Double pole switch for Motor & Inductive Load (c curve) 6.00 Each 360.00 RS: Three Hundred

having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box having following Sixty only

capacity. For 40 Amp.

236 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 1.00 Each 803.00 RS: Eight Hundred

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity [c] Three only

237 Providing and erecting metalic danger notice board for MEDIUM VOLTAGE installation to 2.00 Each 69.00 RS: Sixty Nine

be erected as per I.S. only

Description Total Qty Unit Rate Rate In Word Rs. Amount

238 Providing and erecting multifunctional meter suitable for application of Power monitoring 1.00 Each 13984.00 RS: Thirteen Thousand

and showing measurement of following Voltage, Frequency, Apparent energy, Apparent Nine Hundred Eighty Four

power, Active and reactive energy, Active and reactive power, Average voltage Vavg, Peak only

demand power PM, QM, SM, Demand power P, Q, S, Apparent power S, S1, S2, S3,

Unbalance current, Power factor and displacement PF (signed, four quadrant), Calculated

neutral current, Active, reactive, apparent energy (signed, four quadrant), Active power P,

P1, P2, P3, Voltage U21, U32, U13, V1, V2, V3, Phase currents, Average current Iag,

Peak demand currents, Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us]

rated supply voltage 40...300 V AC 45...65 Hz, 40...300 V DC, Network frequency 50 Hz,

Type of network 3P, Display type 7 segments LED, Display colour Red, Messages display

capacity 3 fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

239 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V 2.00 Each 314.00 RS: Three Hundred

on existing panel board with necessary connections. Fourteen only

240 Supplying and erecting approved make set of indicator lamps of LED type lamp, lense 3.00 Each 43.00 RS: Forty Three

cover, Bakelite holder complete erected with necessary connections. only

241 Providing, erecting, testing and commissioning of L.T. Current Transformer with bus bar 4.00 Each 272.00 RS: Two Hundred

primary 50/5 to 1000/5 ratio 15 VA burden. Duly secured with insulating materials Seventy Two only

connected to the meter.

242 Supply, Installation, Testing & Commissioning of Three Phase, 440 V Surge Suppressor 2.00 Each 6319.00 RS: Six Thousand Three

protection Device (SPD) & 40 Amp TPN MCB (or As per SPD OEM guide line for the Hundred Ninteen only

protection of SPD which is erected such a way that it can be operated easily) SPD must be

capable to protect all electrical and electronics equipments if SPD blast or fuse then the

panel builder must have replace it soon during defect liability period.The Detail

Specification of SPD are As per Attached sheet with Annexture -A(E). (Hakel,ikra,OBBO

make) (With Three year Gaurantee/warranty)

243 Painting the number and words for inventory indentification on erected fitting/equipmant or 30.00 Each 22.00 RS: Twenty Two

such accessories as may required with good qualiuty of enamelled paint as directed by only

engineer in charge (I) up to 20 characters , Up to 50 mm height

Description Total Qty Unit Rate Rate In Word Rs. Amount

244A Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm 7.00 Each 6000.00 RS: Six Thousand

dia in soft soil. Suitable for pipe-in-pipe technology earthing.Earth electric rod must be only

made from Corrosion free Hot dip galvanizing pipes having following specification.

(A) Earth Electrode: outerpipe:- minimum 88mm O.D ,'B ' Class ISI mark of Reputed

Brand, Inner pipe:- 42 mm minimum O.D, Pipe B Class ISI mark reputed Brand Terminal

Size: 70mm X 100mm length, Terminal Should be made from inner pipe for that pipe must

be pressed and give rectangular shape so its work as a terminal.The hot deep galvanising

must be done after above process............

...........Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:-

no.with washer suitable for 14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive material should be 26kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound :-Earthing compound should be capable to retain moisture for long

time Back Filling Compound weight is 25 Kg. Necessary test report must be submitted.

1. Short circuit test by.........

............. ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

{Make & Model to be approved by EIC) OEM has to submit all detail & sample for

approved before supplying } Water must be poured in bore before starting earthing.

Earthing value must be measured with earth tester. Agency has to bring the earth

resistance to at least 02 ohms & voltage between neutral &Earthingupto 02 volt. Agency

has to maintain earthing& its value for one year. If required. Earthing must be done in the

presence of A.E.

244B Providing and fixing heavy-duty earthing inspection chamber : heavy duty PVC/CC/Brick 7.00 Each 1025.00 RS: One Thousand

masonary should be size of 400mmX400mmX400mm depth and Cover should be heavy Twenty Five only

duty cast iron with required size of 300mmX300mmX4mm thick.

245C For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft 7.00 Each 325.00 RS: Three Hundred

soil in earth pit (certificate for soil have to given by DEE / AE along with photographs) Twenty Five only

Description Total Qty Unit Rate Rate In Word Rs. Amount

246 Providing and erecting following type of Modular Type Accessories mounted with 20 G G.I. 5.00 Each 159.00 RS: One Hundred Fifty

company fabricated metalic box, single mounting base frame covered with textured / Nine only

metallic front plate, modules erected with necessary connection. As desired by Engineer in

charge.Two pin / RJ-11 Telephone Socket (For One Gang) Cat-III

247 Modem Jack for Computer Open RJ-45. Cat.-III. 10.00 Each 159.00 RS: One Hundred Fifty

248 SITC of specified make X color for Cat.-6 Data and Y color for Cat.-6 voice cable to be 160.00 Mtr. 47.00 RS: Forty Seven

done in prelaid PVC pipe / raceway, but without the cost of raceway or pipe (the wire is to only

be drawn from MFD/ JB to outlet point) (a) CAT - 6 (For Computer Cabling and For Voice

Cabeling) (Molex, R&M, Avaya, Systimax, Legrand make Only)

249 SITC of company fabricated Patch cords shall conform to Cat- 6 & conductor shall be 10.00 Each 155.00 RS: One Hundred Fifty

stranded for better flexibility Shall support network line speeds up to 1 Gbps Shall have RJ- Five only

45 jacks. For 1 Mtr.[Make and model approved by EIC as per specification]

250 SITC of company fabricated Patch cords shall conform to Cat- 6 & conductor shall be 10.00 Each 199.00 RS: One Hundred Ninty

stranded for better flexibility Shall support network line speeds up to 1 Gbps Shall have RJ- Nine only

45 jacks. For 2 Mtr. [Make and model approved by EIC as per specification]

251 SITC of 8 x 10/100/1000BASE-T PoE ports 1.00 Each 18218.00 RS: Eighteen Thousand

2 x Gigabit SFP ports Two Hundred Eighteen

Advanced L2 switching and security features only

L2+ Static Routing

Optional “standard mode” or “surveillance mode” management user interface

65W PoE budget (Including Five year free maintenance with guarantee)

252 Supply, Installation, testing and commissioning of 24 port Cat 6 19" Toolless Patch Panel ( 1.00 Each 1485.00 RS: One Thousand Four

fully loaded) enable all possible combinations of the various types of cable mounted on the Hundred Eighty Five only

same panel by using various toolless connector blocks/modules. Have a metal structure

enabling them to be durably fixed to the uprights of the 19” chassis and assuring automatic

grounding between toolless RJ-45 connectors, the panel, and the 19” uprights of the

enclosure. Include rear cable support with plastic cable guides to hold cable without need

for cable ties. Include quick mounting system to mount the panel into the 19” rails without

use of cage-nuts. These may be used to secure the connections of wifi access points, IP

cameras, servers, or other critical devices. Front Removal IO's option for maintenance and

trouble shooting with 6 Different Colours Labels for Labelling & Identification of Individual

Ports. & as per attached details specification. (CAT 6 )

Description Total Qty Unit Rate Rate In Word Rs. Amount

253 Supply and installation of 9U steel rack for installing 4 nos. Ethernate switches/Hubs. The 1.00 Each 11441.00 RS: Eleven Thousand

Rack should be fully enclosed steel housing fabricated with 14 SWG sheet and powder Four Hundred Forty One

coated with glass doors and having wire management systems. The rate includes the only

Exhaust Fan, 2 nos. 4 socket and 1 switch power strip and all the wiring in the rack. Size

600 X600 mm (Rittal, Valrack, APC, Legrand Make )

254 Providing & erecting Switch board for Computer or electric apparatus consisting of 10.00 Each 1122.00 RS: One Thousand One

following items in single board erected on Metal board with 3 mm thick PC (Polycarbonet) Hundred Twenty Two

/ Acrylic sheet erected as directed. 2 no. 6/16 Amp. universal Socket, 2 nos. 16 Amp. only

indicator switch, 2 nos. 6 Amp. Switch & 2 nos. 6 Amp. 5 pin Plug. For Computer power

Supply board. Cat.-III.

255 Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, 50.00 Mtr. 275.00 RS: Two Hundred

chloride rigid material with ignition free & flame proof confirming BS .All necessary Seventy Five only

accessories and measuring of following sizes.For 75 mm x 50 mm trunking.[MK,

LEGRAND, OBBO make Only]

256 Providing & Erecting PVC Perforated trunking Channel of Size 45mm X 45mm with 18.00 MTR 153.00 RS: One Hundred Fifty

required size of screw as directed by EIC ( Make: Precision/Premium or Equivalent make Three only

approved by EIC )

257 Providing & erecting Tag Box for Telephone Lines suitable for 50 Pairs Krone type 1.00 Each 1730.00 RS: One Thousand

complete with Krone & locking arrangements. Seven Hundred Thirty

258 Providing & erecting XLPE (IS : 7098) (I) 88 ISI marked armoured Copper cable for 1100 592.00 Mtr. 451.00 RS: Four Hundred Fifty

volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage 1.0 One only

mm thick cable clamp or in existing DWC pipe underground or road crossing or floor of

following size of cables

For 4 core 4 Sq. mm

259 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper 80.00 mtr 838.00 RS: Eight Hundred

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe Thirty Eight only

at road crossing or floor of following size of cables. .(A) 4 core 10Sq. mm

260 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked unarmoured Copper cable for 1100 60.00 mtr 298.00 RS: Two Hundred Ninty

volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. heavy guage Eight only

1.0mm thick cable clamp or in existing DWC pipe underground or road crossing or floor.

(a) For 4 core x 4 sq.mm.

261 Providing & fixing Double compressed heavy duty flange type brass cable gland with 65.00 Each 43.00 RS: Forty Three

rubber ring for P V C insulated armoured cable complete with outgoing tails, insulating tape only

etc. For following size cables. For 2 to 4 core x 4.0 Sq. mm (Sigma, MCI, Comet, HMI

Description Total Qty Unit Rate Rate In Word Rs. Amount

262 Providing & fixing Double compressed heavy duty flange type brass cable gland with 20.00 Each 48.00 RS: Forty Eight

rubber ring for P V C insulated armoured cable complete with outgoing tails, insulating tape only

etc. For following size cables. 2 to 4 core x 10.0 mm2 (Sigma, MCI, Comet, HMI Make

263 Providing & fixing PVC cable gland with rubber ring for P V C insulated unarmoured cable 20.00 Each 25.00 RS: Twenty Five

complete with outgoing tails, insulating tape etc. For following size cables. (a)For 2 to 4 only

core x 6.0 to 10Sq. mm

264 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for cable 152.00 Each 8.00 RS: Eight only

of following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5 to

265 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for cable 20.00 Each 10.00 RS: Ten only

of following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. [a] For 10sqmm

266A Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, 120.00 Mtr. 46.00 RS: Forty Six only

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and

bolts if required. [f] One wire 4.00 sq. mm

266B One wire 6.00 sq. mm 200.00 Mtr. 70.00 RS: Seventy only

266C One wire 10.00 sq. mm 150.00 Mtr. 114.00 RS: One Hundred

266D One wire 16.00 sq. mm 300.00 Mtr. 176.00 RS: One Hundred

Seventy Six only

266E One wire 70.00 sq. mm 200.00 Mtr. 829.00 RS: Eight Hundred

Twenty Nine only

267 Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 366.00 Mtr. 117.00 RS: One Hundred

(part 24) 2018)) with minimum load required of 450N capacity with anti rodent and ultra Seventeen only

violet material properties with necessary connecting accessories of same material at

required depth to be laid 90 cms. under ground for laying of cable below ground / road

surface for enclosing cable and back filling the same to make ground as per original.

For Outer dia. 50 mm and Inner dia. 38 mm. ) (Test Certificate to be Submitted)

268 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cms. below ground across the 20.00 Mtr. 340.00 RS: Three Hundred

road crossing or on floor with necessary material in an approved manner and making the Forty only

ground as per original.(C) 300 mm dia

Description Total Qty Unit Rate Rate In Word Rs. Amount

269 Providing & erecting open well horizontal mono block pump set with cast iron body, 2.00 Each 11691.00 RS: Eleven Thousand

complete for three phase submersible motor having [A] For 1.5 HP 3 phase open well Six Hundred Ninty One

horizontal mono block pump set suitable for 190 LPM @ 20 mtr head suitable for 40 mm only

dia delivery pipe

270 Supplying & erecting approved make motor control cubical panel (Direct - on - line) made 2.00 Each 7646.00 RS: Seven Thousand Six

from 16 G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors Hundred Forty Six only

and locking, arrangement consisting of suitable size of ON- OFF isolator (AC - 3/23duty)

main fuses, single phasing preventer, indicating lamps for R- Y - B phases, overload relay,

Automatic water level controller, Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor & overload relay, start - stop push

buttons, to be erected on angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L & T, Siemens or BCH make only. (A) DOL up to

271 Supplying and erecting C.I. Swing check type non-return (reflux) valve ISI marked with 2.00 Each 1010.00 RS: One Thousand Ten

packing, flange, nuts and bolts etc.suitable for following pipe size. [B] For 50 mm dia. Hundred Ten only

(SANT,KIRLOSKAR,LEADER,ZOLOTO)

272 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked 20.00 Mtr. 58.00 RS: Fifty Eight

copper wires of following size to be erected as directed. 3 core 1.5 sq.mm. PVC insulated only

round copper wire ISI mark.

273 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked 80.00 Mtr. 96.00 RS: Ninty Six only

copper wires of following size to be erected as directed. 3 core 2.5 sq.mm. PVC insulated

round copper wire ISI mark.

274 Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light Luminaire 5.00 Each 4406.00 RS: Four Thousand Four

with total consumption of 48 - 59 Watts with single piece die cast aluminium housing, High Hundred Six only

power White LEDs wattage of 5 Watt & Above shall be mounted on high quality metal core

PCB with extremely precison designed heat sink complete with IP66 protection Class with

polycarbonate / thoughened glass cover / cluster Lens the fixture should be suitable for

pole/bracket mounting. The fixture to comply both LM79 and LM 80 guidelines with

.............. module L70 at 50,000 hrs, provided with high quality polycarbonate lenses

/cluster Lens for better light distribution. The Fixture Should be able to be Pole Mounted

and also bracket mounted, provided with high quality driver for protection against high and

low Voltage cut Off, opertional for high amibient and high humid envirnoments, THD of

driver should be less than 10% and P.F > 0.95. Also the Fixture should meet the following

technical criterias Oprating range Voltage 160 to 270 V, system efficiency >= 150 lm/w, and

total lumens ..........

Description Total Qty Unit Rate Rate In Word Rs. Amount

............not less then 7500 CCT > 5000K, CRI > 65, beam angle 120 deg, surge immunity

level at least 4 KV integral and 10 KV non integral The Separate Potted driver should have

over current, over voltage protection, short circuit protection so that the fixture recovers

once the fault is removed. In addition to the above product should be operational in the

temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH. (Note:- The

manufacturer / authorized Channel partner of the manufacturer has to submit 5 yrs free

replcement Guarantee for complete Fixture)

275 SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total consumption 19.00 Each 5229.00 RS: Five Thousand Two

of Max. 90 W with single piece die cast aluminium housing, high power LED shall be Hundred Twenty Nine

mounted on high quality metal core PCB with extremely precison designed heat sink, only

complete with IP66 protection Class, with polycarbonate / toughened glass cover. The

fixture should be suitable for pole/bracket mounting. The fixture to comply both LM79 and

LM 80 guidelines with LED minimum 130 lumen/watt with toughen glass, L70 at 50,000 hrs,

provided with high quality polycarbonate lenses for better light distribution. The ...........

............Fixture Should be able to be Pole Mounted and also bracket mounted, provided

with high quality driver for protection against high and low Voltage cut Off, opertional for

high amibient and high humid envirnoments, THD of driver should be less than 10% and

P.F. greater than 0.95. Also the Fixture should meet the following technical criterias.

Voltage 160 to 270 V, system efficiency greater thanequal to 120 lm/w and total lumens not

less than 14400, operating current less thanequal to700MA, CCT greater than 5000K, CRI

greater than65, beam angle 120 deg, surge immunity level 4 kv integral & ..........

...........10 kv non integral The Separate Potted driver should have over current, over

voltage protection, short circuit protection so that the fixture recovers once the fault is

removed. In addition to the above product should be operational in the temperature range

of 0 deg to 50 deg and humidity range of 10% to 90% RH. (Stricly sample approved by EIC

subject to tender specification) (Note: The manufacturer/authorized Channel partner of the

manufacturer has to submit 5 yrs free replcement Guarantee for complete Fixture)(Cool

White Color/warm white/natural white ( model approved by engineer incharge subject to

above specification )

Description Total Qty Unit Rate Rate In Word Rs. Amount

276 SITC of BIS approved LED Post top Lantern with installation maximum power 40W with 2.00 Each 4056.00 RS: Four Thousand

CCT in Cool/ Neutral White color temperature 4000K/ 5700K, CRI ≥ 70, Standard . LEDs Fifty Six only

used must have a life of 50000 burning hrs. & Lumen maintenance as per L70, The

Luminaire System efficacy must be of >75LPW. Total Lumens of fixture must be

Luminaire body must be made of PDC Aluminium housing for rapid thermal dislpation

healing & Powder coated by Corrosion resistant Nano coating technology. The fixture must

............provided with injection molded PC diffuser Optics with 360° Roto-Symmetric

Distribution, 100% DLOR ensuring No upwards light spilage. The fixture should have a

protection of Ingress of IP66 and impact protection of IK08 . The luminaire must have high

efficiency electronic integral sleeve potted driver with voltage range of 160-270V, Power

factor > 0.95 and THD < 10% with Inbuilt surge protection of 06 KV & additional SPD with

10KV protection. Luminaire must have OEM logo embossed / engraved (no stickering is

allowed). Luminaire should be with basic protections like short circuit , Mis wiring , reverse

polarity , under voltage & over voltage protection.(Model Shall be finlised by EIC as per site

277 Supplying and erecting approved make Octagonal pole made from HR sheet steel. The 7.00 Each 7609.00 RS: Seven Thousand Six

pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS Hundred Nine only

2629/2633/4759, suitable suspend local wind speed with integral Junction box with Hot

Deep Galvanised door having 2 nos. 180° operated hinges & 2 nos. Ln key locking with

silicon rubber gasket. Consist of terminal plate of min 6mm Hylam sheet, standard profile

35 mm X 7.5 mm Din-Rail & MCB, Brass stud type terminal and arrangement for cable

termination to be erected on RCC foundation as per details given by manufacturer and EIC

considering site requirement.

Foundation Details: (1) Grade of RCC 1:2:4, (2) Grade of steel rainforcement of RCC FE

415, (3) Clear cover to rainforcement 50mm, (4) Concrete vibrated, (5) use suttering /

farma, (6) Hot deep galvanized average 70 Micron, (7) Detail drawing will be given by

0 (C) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with 225 mm X

mm X 16 mm base plate, 4-M20 Bolts and 600 mm long hot deep galvanized J-Bolt, nuts,

washers with 800 mm under ground and 200 mm above ground level and Foundation in

1:2:4 proportion as per details given by manufacturer and EIC considering site requirement.

Approx Pole weight 84 kg.(Make:- Bajaj, Valmont, Transrail, Ambica Only) (Test certificate

to be submitted)

Description Total Qty Unit Rate Rate In Word Rs. Amount

278 Supplying and making Coil type earthing, coil made from 8 SWG galvanised iron wire with 7.00 Each 369.00 RS: Three Hundred

50 mm OD and 50 turns (length of turns approx. 200 mm) and having additional continuous Sixty Nine only

streight length of 3.00 mtr at open end and should be connected to earthing bolt and

burried in 1.5 mtr deep specially prepared earth pit complete with salt and charcoal/coke as

required for coil type earthing.(Approx weight of coil 1.0 to 1.1 Kgs)

279 Providing & Erecting Universal Astro 5 KVA intelligent streetlight control system insu with 2.00 Each 12895.00 RS: Twelve Thousand

weather proof box for outdoor application. (As per specification attached separately) (Make Eight Hundred Ninty Five

and model approved by EIC) only

280 Supplying and erecting Servo Controlled Voltage Stabilizer (SCVS) as per following 1.00 Each 64803.00 RS: Sixty Four Thousand

requirement: (1) Input Voltage Range - Three Phase 340 To 480 Volt AC. (2) Out put Eight Hundred Three

Volatge - Three Phase 415 Volt AC (Line - Line) with Voltage Regulation of +/- 1%. (3) only

Frequency range - 47 Hz To 63 Hz. (4) Efficiency - More or equal to 98%. (5) Type of

Stabilizer - Suitable for Balance & Unbalance Load and Voltage (6) Controlled Type -

Digital Micro Controller Based Disply. (7) Rate Of Correction - Upto 100 Volt / Sec (Line -

Line) (8) Servo Motor Drive - ...........

................A.C Syncronous Stepper Motor - As per KVA Capacityy, Out put volatge and

Voltage regulation requirement. (9) Nil Wave form Distortion and Effect of Load POwer.

(10) Responce Time - 10 milli second. (11) Protection requirements - Input low Cut off

protection / Input High Cut Off Protection / Output Low Cut Off protection / IOutput High

(12) Fault Annuciation Panel LED shows Input present, Input high Input low, Output

Normal, Output High, Outpur low, Overload. (13) Output On time delay - 10 seconds (14)

Ambient Tempeature capacity - 0 - 45 RH upto 90 %. (15) Enclosure Type - IP55 (16) Type

of Cooling - Oil,Output:Bypass switch with changeover switch and seperate Input and

Output arranged cable connection Gap Outside stabilizer & 4 year free replacement

guarantee on Stamp paper. (f) 15 KVA (Air Cooled) (Fuji , Servomax , Krykard, protkG

Description Total Qty Unit Rate Rate In Word Rs. Amount

281 Supplying and erecting Fabricating terminal box for street light pole made from 16 SWG 17.00 Each 702.00 RS: Seven Hundred

M.S. sheet having following size complete with fixing arrangement for terminal board, with Two only

necessary hole for wire entry and exit from the box. The box shall be provided with cover

and hinges on one side and bolting at other end The box shall be fixed by clamps

fabricated from 25mm x 6mm flat.The box shall be painted with one coat of red oxide and

two coats of paint having following box size 330 mm x 260 mm x 140 mm (depth).

Providing and fixing Terminal board of size 5.0 x 127 x 152.4 mm.bakelite sheet with

Amp. kitkat pattern porcelain fuse unit with suitable brass studs with nuts, washers and

clamps of size 25 mm x 3 mm suitable for pole painted with one coat of red lead paint.

282 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop- 3.00 Each 890.00 RS: Eight Hundred

out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E), DIN rail Ninty only

for mounting mob & hinged doors as per requirement having locking arrangements with

mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps&

earth bolt of following size of box. (A) 300mm x 200mm x 100mm

283A Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside 19.00 Each 487.00 RS: Four Hundred

diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and Eighty Seven only

length suitable for 76.5 / 80 mm. required size of pole top or pipe in pipe surface for terrace

as per instruction of EIC or wall bracket as per instruction of EIC having nuts and bolts for

fixing the brackets and having spread of Upto 0.70 mtr. length with suitable degree angle

as per site situation suggested by EIC.Vertical plane and suitable welded stiffner reducer

and nipple with check nut complete painted with one coat of red oxide and two coats of

alluminium paint( Zinc coating before alluminium paint in mandatory)with with

150X150X2mm thick G.I plate with 4 nos heavy duty galvanized anker fastner of required

size or Single arm bracket (pipe in pipe type )suitable for terrace as per design given by

EIC For single arm bracket. (Fabricators: Bajaj, Valmont, Transrail, Ambica, RR Ispat

Only) (Test certificate to be submitted)(Fognment ,testin

283B For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators: 4.00 Each 616.00 RS: Six Hundred

Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test certificate to be submitted) Sixteen only

Description Total Qty Unit Rate Rate In Word Rs. Amount

284 Supply, Installation, Testing and Commissioning of Single action Manual Pull Station.Shock 7.00 Each 380.00 RS: Three Hundred

and Vibration Resistant, Pull Down Lever Remains Down Until Reset. Shall be Polarity Eighty only

Insensitive (with all mounting accessories , complete with Junction Box for mooting on

Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling.) (ASES

/ravel/morley or approved by EIC as per Tender specifications) (Test certificate must be

285 Supply, Installation, Testing and Commissioning of Conventional Sounder cum strobe 7.00 Each 414.00 RS: Four Hundred

having tone settings with range of 95-105 dbA and field selectable 15/30/75/110 candelas, Fourteen only

24 Volt (with all mounting accessories , complete with Junction Box for mooting on Surface,

Cable lugs at Ends, cable compression glands, cable tags and Ferruling.) (ASES

/ravel/morley or approved by EIC as per Tender specifications) (Test certificate must be

286 Supply, Installation, Testing and Commissioning of modern 2-ZONE Conventional Fire 2.00 Each 30241.00 RS: Thirty Thousand

Detection and Alarm System of an approved manufacture and design, and in accordance Two Hundred Forty One

with the requirements of BS 5839 part 4 and EN 54-2 & 4, and with quality assurance only

requirements of ISO 9001-1994. The panel shall be LPCB approved.

The system equipment shall be CE tested and certified and the CE marking shall appear

on the packaging and/or included in the operating instructions. The control panel shall be

housed in a steel enclosure with partially glazed door. All electronics within the panel shall

be microprocessor controlled. The motherboard and ........

...............the display electronics inside the control panel shall be fixed on to a detachable

chassis. The panel shall include an integral power supply unit and sealed lead acid

batteries(power backup). A fire relay with two changeover contacts and a fault relay with

changeover contact shall be supplied in the control panel. Facilities for remote evacuation,

silence and reset of system shall be provided. Twin LED's shall be provided for zone

identification. They will flash intermittently when an alarm is received and change to steady

when the alarm is acknowledged. A flashing amber fault led shall indic All zones shall be

monitored for both open and short circuit faults, (ASES /ravel/morley or approved by EIC

as per Tender specifications) (Test certificate must be submitted)

Description Total Qty Unit Rate Rate In Word Rs. Amount

287 Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having capacity 6 kg 5.00 Each 1991.00 RS: One Thousand Nine

Filled with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Hundred Ninty One only

Type, UGTS Pressure Gauge, Can Height 530 mm, Diameter 150 ± 10mm, Discharge

Time 24 Sec, Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge

is 92%, applicable on Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can

Construction : Deep drawn & CO2 Mig welded, EPDM(Ethylene Propylene Diene Monomer)

Rubber Hose with both end Aluminum clamped,........

................. Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester

Powder coating (UV Resistant),Brass forged CE Marked valves with NRV & Auto Safety

Release with safety Pin is of SS material, Made up from 1.6mm thick sheet, Extinguishers

confirmed to IS 15683:2018 and ISI marked. Referance Weight:-Gross Weight 8.9 Kg,

Empty Weight 2.9 Kg, 1. Necessary certificate & and guarantee must be attached, 2. OEM

has to provide wall mounting heavy duty bracket/clamp, screw, hardware for installation.

3.Following .........

...........printed marking Manufacturing Date and Expiry Date must be mention on

Extinguisher 4. Refilling period must be of 3 Years. Following Printed marking on

equipment must be required:- Model No, Capacity, Gross Weight, Content, Fire Rating,

Batch No, Serial no, Mfg Month, Refilling Due. [with necessary numbering / marking with oil

paint by painter as instructions given by G.S.P.H.C.L engineer] (Make: KANEX,

MINIMAX,CEASEFIRE)

288 Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire Extinguisher, filled 5.00 Each 6526.00 RS: Six Thousand Five

with Co2 Gas as per IS 15222, Control discharge mechanism fitted with 1 Meter Wire Hundred Twenty Six only

Braided Hose & Electrical non-conductor Polyethylene Flat Horn with Diffuser Nozzle for

dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%,

Applicable on Class B, C and electrically started Fire, Fire Rating 55B, Internal coating is

not applicable & External coating is of enamel spray painting, Powder Coated Handle,

Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: ........

................hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS

and PESO ( Petroleum and Explosives Safety Organization) APPROVED, Minimum Wall

Thickness 4 to 4.2 mm, Extinguishers confirmed to IS 15683:2018 and ISI marked.

Referance Weight:-Gross Weight 16.4, empty weight 11.9 Kg, 1. Necessary certificate &

and guarantee must be attached, 2. OEM has to provide wall mounting heavy duty

bracket/clamp, screw, hardware for installation. 3.Following printed marking Manufacturing

Date and Expiry Date must be mention on Extinguisher 4. Refilling period........

Description Total Qty Unit Rate Rate In Word Rs. Amount

........... must be of 5 Years. Following Printed marking on equipment must be required:-

Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month,

Refilling Due. [with necessary numbering / marking with oil paint by painter as instructions

given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX,CEASEFIRE)

289 Providing and fixing of Automatic type 5 kg Fire Extinguishers Mono Ammonium 2.00 Each 5240.00 RS: Five Thousand Two

Phosphate powder 50% Confirms to IS 4308, Applicable fire classes A,B & C, UGTS Hundred Forty only

Pressure Gauge, Can Height 370mm, Diameter 230 ± 10mm, Made up from 2 mm thick

sheet, Body Construction Deep Drawn with MIG Welding technology, Brass forged sprinkler

valves with Nozzle is specially designed to give more than 99% discharge. Together with

orifice characteristic to cover adequately fire risks with scattering cone of 40 to 45° Angle.

External Pure polyester (UV resistant) and Internal Epoxy polyester powder coated, .........

..........Heat Sensitive Glass bulb of 68 °C. Area covered will be 2-2.5 m2 and volume of

coverage is 7 m3. Referance Weight:-Empty Weight 2.64 kg, Full weight 7.64 kg,

Necessary certificate & and guarantee must be attached, 2. OEM has to provide heavy

duty wall/ Ceiling mounting Bracket/ clamp, screw, hardware for installation. 3.Following

printed marking Manufacturing Date and Expiry Date must be mention on Extinguisher

Refilling period must be of 3 Years. Following Printed marking on equipment must be

required:- Model No, Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no,

Mfg Month, Refilling Due. [with necessary numbering / marking with oil paint by painter as

instructions given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX, CEASEFIRE)

290 Providing printed instruction chart both in English and Gujarati and duly framed with front 4.00 Each 129.00 RS: One Hundred

glasses, for treatment of person suffering from Electric shock Twenty Nine only

291 Supplying, installation, testing and commissioning of electric driven terrace pump suitable 2.00 Each 35925.00 RS: Thirty Five Thousand

for automatic operation and consisting of following, complete in all respects, as required: Nine Hundred Twenty Five

(Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing only

pump of cast iron body & bronze impeller with stainless

steel shaft, mechanical...........

Description Total Qty Unit Rate Rate In Word Rs. Amount

............ confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type

suitable for operation on 415 volts, 3 phase, 50 Hz, AC

supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-

'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling,

coupling guard, foundation bolts etc.as required.

(d) Suitable cement concrete foundation duly plastered

and with anti vibration pads. FOR 450 LPM at 35 Mtr Head Terrace Pump

292 Supplying & erecting approved make motor control cubical panel (Direct - on - line) made 2.00 Each 7646.00 RS: Seven Thousand Six

from 16 G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors Hundred Forty Six only

and locking, arrangement consisting of suitable size of ON- OFF isolator (AC - 3/23duty)

main fuses, single phasing preventer, indicating lamps for R- Y - B phases, overload relay,

Automatic water level controller, Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor & overload relay, start - stop push

buttons, to be erected on angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L & T, Siemens or BCH make only.(b) (c) Rating of

DOL Starter Panel as per Terrace Fire Pump Requirement

293 Executing comprehensive (All-in-All) service & maintenance with spare parts as per terms 2.00 Each 2614.00 RS: Two Thousand Six

& condition of tender for Fire terrace pump with fire hydrant agency for defect liability period Hundred forteen Only

and copy of this contract will be submitted before final bill. Agency has to quote rate

accordingly. Agency has to also provide the fitness certificate from system agency and

submit to G.S.P.H.C.L. Agency has to submit FDR of Rs.5228.00+GST or quoted rate

whichever is higher to G.S.P.H.C.L,for minimum maturity period of Four years in favour of

G.S.P.H.C.L Which will be released after successful completion of A.M.C. & at the

completion of defect liability period. Fire System agency has to.........

Description Total Qty Unit Rate Rate In Word Rs. Amount

............... maintain written record of service & maintenance during defect liability period

duly sign by police dept. and submit regularly to G.S.P.H.C.L. Agency has to give minimum

three services and demonstration per year and testing and training of pump during defect

liability period and obtain necessary certificate from police department and submit to

G.S.P.H.C.L. Agency has to do maintenance as per terms & condition alternative in

tender.Agency has to give One live demonstration of fire Mock drill for fire fighting with

minimum 01 no. CO2 and 01 no. ABC type fire extinguisher at the time of handing over this

system to the Police department and another at the time of releasing final Security

deposit. The necessary certificate / photographs for that must be submitted.

294 Supply, Installation, Testing and Commissioning of Pump On-Off switch (with all mounting 7.00 Each 380.00 RS: Three Hundred

accessories , complete with Junction Box for mooting on Surface, Cable lugs at Ends, Eighty only

cable compression glands, cable tags and Ferruling.)for remote operation from each floor

of the building. (Approved by EIC) (Test certificate must be submitted)

295 Supply and laying of 4 core x 1.5 sq.mm Copper Armourd cable with all require accessories 101.00 Mtr 107.00 RS: One Hundred

[From fire panel in pump room to fire duct for ON-OFF switch connection for fire system] Seven only

(For Terrace Pump )

296 Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI 296.00 Mtr 39.00 RS: Thirty Nine

marked copper wires of following size to be erected as directed.For 1.50 Sq.mm 2 core only

round PVC sheathed. having insulation colour RED and BLACK for Fire Alarm System.

297 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar Power 10.00 PER KW 43645.00 RS: Forty Three

Plant with Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Thousand Six Hundred Forty

Frame With Twin Wall Profile, Front Cover : High Transmission Low-Iron Tempered Glass Five only

(AR Coated), High efficency and positive power tolerance Pmax: 0/+5, Module Efficiency

should be approx. 18%-21%, Normal operating temperature 45'C, Junction Box with

Waterproof IP67 &...........

............ MC4 Compatible and Enclosed with Bypass diodes, 100% Electroluminescence

test to ensure error free Modules, Thep. temp. co-efficient of the PV module shall equal or

better than -0.45%/degree C. Solar PV modules of minimum fill factor 75% to be used. Unit

Production:- 4 to 5 Unit /kw /day (Actual)(1Year Avg) With 10 year Product warranty and

year Linear Power Warranty.,

Solar Inverter: MPPT Range: 80-1000 V, Max efficiency: 97.5% - 98.9%, O/p Frequency:

50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor: ~1, O/P THDi: <3%, Operating

Tempreture Range: -25~60°C, Anti-islanding Protection:

Description Total Qty Unit Rate Rate In Word Rs. Amount

0 Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor Detection

Integrated, Residual Current Monitoring Unit Integrated, Output Over Current Protection

Integrated, Output Short Circuit Protection Integrated, Output Over Voltage Protection

Integrated, Protection Degree: IP65, User Interface LCD & APP,Datalogger &

Communication: GPRS / Wi-Fi, Module Mounting Structure: Seamless Box Pipe / 'C'

Channel of suitable size for rooftop solar installations with good stability agaist wind &

weight load., Hot Dipped ............

...........Galvanized steel coils. suitable arrangement for base plate for foundation , solar

panel mounting, the structure should be suitable for carry the load of solar panel,wiring,

sprinkler system etc. with necessary foundation work/wall mount, j bolt, anchor fastner etc.

the nut bolt used for installtion of stucture should be (SS 304) quality. and Balane of

System with necessary Swithgears (Suitabel size and protection of ACDB & DCDB), inter

connecting wiring, earthing system, lightining arrester system, all liasoning work with

various gov. department like state nodal agency,DISCOM & CEIG is included in agency

(E) Grid Tied Solar Power System: 40 kW (3 - phase)

0 Note 1: Fabrication design drawing shall be approved by structure consultant W.R.T Wind

velocity and weight of panel.Height of Structure shall be decided by GSPHCL &

Beneficiearies.So maintenance of terrace water proofing and easy access to

all.Foundation and Anchor Bolt erection must be such as to avoid water leakage from slab

.Civil & Electrical Agency and GSPHCL Civil engineer have to decide the methodology

ation of foundand work should be carried out under supervision of GSPHCL Civil Engineer

0 Note2: Capacity of Solar Panel in Tender is approximately .Engineer In Charge(EIC) can

increase ane decrease the capacity in KW as per site requirement.

0 Note3: Any Subsidy received by the government towards the cost of solar roof tops will

have to diposited in the GSPHCL.Keeping this in mind, the agency will have to quote the

rate in the tender.

298 Executing Com of solar Pv Modules, Inverter, wiring,earthing,switchgears, etc with material 10.00 PER KW 11020.00 RS: Eleven Thousand

and labour cost including preventive maintanance.The cost covers entire installation. AMC Twenty only

also includes monthly site visit and inspection of project with submission of inspection and

solar generation report. All parts should be replaced/repaired if found faulty within specified

time. Agency has to provide necessary liasoning work for warranty,power,Bidirectional

meter etc of following Capacity as per terms & condition of tender for defect liability

period.Agency has to submit FDR of approved bank as ........

Description Total Qty Unit Rate Rate In Word Rs. Amount

.............per clause 2.0 section 3 Rs 110200 + GST or quoted rate which ever is higher to

GSPHCL,for minimum maturity period of four years in favour of GSPHC .Which will be

released after succesfull completion of AMC & at the end of defect liability period.Solar

Agency has to maintain record of service & maintenance during defect liability period duly

sign by Benificiaries and submitted regularly to GSPHCL & also get satisfactory certificate

from beneficiaries at the time of Defect liability period and copy of maintenance contract

must be submitted during final bill. (D) For 10KW system

299 Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. 2.00 Nos. 15466.00 RS: Fifteen Thousand

powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon Four Hundred Sixty Six

filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon only

filter auto low & high pressure switches with following size of storage tank & LPH capacity &

erected as directed [B] 25 Ltr / Hr with 30 Ltr. Storage Tank [make:-ION EXCHANGE,

AQUAGUARD, KENT, Eureka Forbes, Rain Drop, Power h2o,Blue Mount Appliance

approved by EIC as per specification]

300 Providing and erecting water cooler having storage capacity 40 Ltr. & cooling capacity 2.00 Nos. 35265.00 RS: Thirty Five Thousand

15Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by Two Hundred Sixty Five

15˚C within a hour, The water cooler should be comprising of hermetically sealed only

compressor Reciprocating compressor with R134A gas , fan motor, Copper Condensing

unit, fan motor, water tank surrounded by evaporating, coil, thermostats, relay

etc.complete with necessary inlet & outlet connection. The body of water cooler will be

made from Stainless Steel,...........

............ CP brass push cock, inlet float valve, with all plumbing and electrical accessories,

inlet, outlet, overflow and PVC drain out connection to FD complete as required With

Amp. 3 pin plug Top with indicator. (This item including comprehensive service &

maintanance including Spare Parts & consumable item during warranty period of one year.

Maintanance & service must be carried out by OEM dealer/distributer who has executed

the work. Service & Maintance must be as per OEM guid line.) (Agency has to give AMC to

water cooler OEM / authorized dealer upto defect liability period] [Voltas, Bluestar, Usha

model approved by EIC as per specification]

Description Total Qty Unit Rate Rate In Word Rs. Amount

301 The purpose of RO plant is cater the portable and drinking water 24X7 to beneficiary.So we 2.00 Job 15002.00 RS: Fifteen Thousand

have taken comprehensive maintenance contract item in this tender. Agency has to give Two only

All in All maintenance contract to OEM of RO plant and submit AMC copy to GSPHCL at

the time of final bill.Agency has to submit FDR of Rs 30004.00+ GST or quoted amount

whichever is higher to GSPHCL. Which will be released after successful completion of

AMC & at the and of defect liability period. AMC consist of general service & Filter shall be

replaced at every 3 months.Membranes & booster pump shall be repaired/ replaced

whenever required.Agency has to stick maintenance schedule on the RO plant and date of

service, TDS of water, discharge of water etc. shall be written on this.Agency has to receive

certificate from beneficiary every year and submit at the time of releasing SD.For 25 Ltr RO

Total Electrick Amount

Total DTP ( A+ B ) Amount

NADIAD GANDHINAGAR