Resurfacing of Chanpa Approach Road (VR) Km.0/000 to 0/600 Ta.Chotila , Dist.; Surendranagar (9th attempt)

Name of work :- Resurfacing of Chanpa Approach Road (VR) Km.0/000 to 0/600 Ta.Chotila

Dist.; Surendranagar. (Under MMGSY-Normal-2024-25)

BILL OF QUANTITIES

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

1 Clearing and grubbing of road land 0.21 One 28393.03

incl.uprooting rank vegetation, grass, Hect.

bushes, shurbs, saplings and trees girth upto

300mm removal of stumps of trees cut

earlier and disposal of unserviceable

materials © By mechanical means in area of

2 Earthwork for embankment including 247.55 One 150.38

breaking clods, dressing with all lead and lift Cum

(Excluding watering and consolidation) (A)

Selected soil should be From borrow area

with all lead and lift and should have CBR

not less than 6.00%.

3 Scarifying graveled macadam or Bitumen 1125.00 One 39.62

macadam surface 6cm to 10cm depth Sqm

including stacking useful materials on road

side and disposing off remaining stuff.

4 WBM Grading-1 225.00 One 1341.17

Providing, laying, spreading and compacting Cum

stone agg. Of 90mm to 45mm size to water

bound macadam specification including

spreading in uniform thickness, hand

packing, rolling with smooth wheel roller 80-

100 KN in stage to proper grade and camber,

applying and brooming, stone

screening/binding material to fill-up the

intersties of coarse agg., watering and

compacting to the required density grading-

1 as per Technical Specification Clasue.405

By menual means.

5 Rolling and Watering of earthwork with 270.00 One 22.48

vibratory roller including filling in Cum

depression which occur during the process

and as directed.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

6 Providing and laying bitumenous grout 173.00 One 2059.53

37.50mm thick using Emulsion RS1 for tack MT

coat at the rate of 4.00kg/10sqm on W.B.M.

and using BT chips for required gradation

with the asphalt of grade (VG-30) at the rate

of 1.99% i.e 19.90kg/MT by weight of mix

including heating and mixing in drum mix

plant , transporting the mix and spreading

the same by paver finisher and consolidation

as per MOST specification including cost of

all materials fuel, labours, tools and plants

etc. using contractor's own drum mix plant

7 Providing, laying and rolling of 25mm thick 122.00 One 2554.08

open graded premix bituminous carpet with MT

B.T aggregates as specified and using bulk

Emulsion RS1 for tack coat at the rate of

2.50kg/10sqm on B.T.Surface (As per IRC-

16) and using bitumen for mixing with

aggregate at the rate of 3.36% i.e

33.60kg/MT. of total mix including heating

and mixing in drum mix plant, spreading the

same with paver finisher and consolidation

with vibratory roller including necessary

firewood, oil, lubricants, labour charges etc.

using equipment tools etc. completed in

accordance with the requirement of

8 Providing and laying seal coat using Bitumin 63.00 One 2859.20

grade VG-30 with B.T. aggregate as specified MT

using aggregate at the rate of

0.18cum/10sqm. And bitumen for mixing

with aggregate at the rate of 4.5% i.e

45.00kg/MT of total mix including heating

and mixing in drum mix plant and spreading

the same by paver finisher and consolidation

with vibratory roller including necessary

using contractor's own drum mix plant,

machineries and equipment, tools etc.

complete in accordanace with the

requirement of specification.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

9 Excavation for foundation upto 1.5m depth 26.90 One 241.79

including sorting out and stacking of useful Cum

materials and disposing of the excavated

stuff upto all lead. (B) Dense or hard soil.

10 Excavation for foundation upto 1.5m depth 18.00 One 412.00

including sorting out and stacking of useful Cum

materials and disposing of the excavated

stuff upto all lead. (C) Hard Murrum

11 Providing and casting in situ ordinary 46.30 One 3799.62

cement concrete M-150 mix and providing Cum

necessary pin headers including shuttering,

scafilding, laying vibrating, curing and

finishing complete Without V-Grooves For

12 Providing and filling in foundation with 5.40 One 3226.63

ordinary cement concrete M-100 mix and Cum

providing necessary vertical pin headers

incl. Formwork, vibrating, ramming and

curing complete.

13 Providing and laying weep hole in 15.00 One 53.44

Abutment and returns by using A.C pipe of No

100mm. Incl. fixing in proper grade and

jointing the complete as per detailed

14 Providing and laying in Position FE - 0.350 One 73217.52

500/500D TMT bar reinforcement including MT

cutting, bending, hooking and tying

complete as per detailed drawings for the

following (A) Piers (B) Abutments (C)

Returns (D) Walls etc.

15 Filling available excavated earth (excluding 78.70 One 130.39

rock ) in trenches plinth sides of foundation Cum

etc. in layers not exceeding 20cm in depth

consolidating each deposited layer by

ramming and watering.

16 Providing and fixing Precast cement concrete 2.00 One 356.49

Hectometer as per IRC type design incl. No

painting, lettering etc. fixing in C.C. 1:5:10.

17 Providing and fixing Precast cement concrete 180.00 One 327.69

Guard stone as per I.R.C. type design No

including white washing etc. complete.

Fixing in C.C.1:5:10.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

18 Providing and fixing ordinary Kilometer 1.00 One 704.33

stone of pre-cast C.C. 1:2:4 including No

necessary reinforcement as per I.R.C. type

design in C..C. 1:4:8 including painting

lettering etc. complete. (For ODR, VR)

19 Providing and fixing Indicator stone of 27.00 One 102.84

approve stone as per I.R.C. type design in No

C.C. 1:4:8 including white washing etc.

complete Fixing in Earth

20 Supplying and fixing Junction Boards of 1.00 One 5236.69

M.S. plates and angles as per I.R.C. design No

incl;. Fixing in C.C. 1:4:8 with necessary

excavation painting, figuring, lettering on

boards etc. complete.

21 Providing and fixing Village name Boards as 1.00 One 3437.59

per standard I.R.C. type design of steel plate No

incl. painting, lettering etc. complete with

fixing in C.C. 1:4:8 block with necessary

excavation etc. complete

22 Providing and fixing Road sign of M.S. plate 6.00 One 3072.98

and angle iron incl. painting, lettering etc. No

complete. fixing in C.C. 1:4:8 block with

necessary excavation etc. complete as per

IRC type design (i) Reflective Type.

23 Village/Bump Ahead sign. : Providing and fixing 4.00 One 5045.36

sign boards made out of 2mm Aluminium sheet size No

90x60 cms. Rectangle as per the design of IRC-67-1977

pre treated with phospheting process and acid

etching coated with one coat of apoxy primer and two

coats of best quality epoxy paint reflectorised with

retro reflective sheeting as per latest MOST

specification letter and numbers should be as per

IRC:30-1968, 3.1 Mt. long (2 nos) stand post and frame

fabricated from suitable size iron angle of

50x50x5mm, painted with best quality epoxy coating

in black and white bends, the details of symbole on

inscription/ numerals for each board shall be as per

the instruction of the Engineer in charge. The fixing at

site shall be in C.C 1:2:4 block of size 45x45x60cms. for

each leg including excavation curring etc. complete

under the supervision of engineer in charge (A)

Engineer Grade.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

24 Informatory Signs :-Providing and fixing sing boards 1.00 One 3856.89

made out of 2mm aluminium sheet; size 80 x 60cms. No

rectangle as per the design of IRC-67-1977 pre treated

with phospheting process & acid teching; coated with

one coat of epoxyprimer and two coats of best

qualityepoxy paint; reflectorised with retro refiective

sheeting as per latest M.O.S.T. Specifications; 3.1m

long stand postand frame fabricated from suitable

sizeiron angle of 35 x 35 x 3mm75x75x6mm as

required; painted with best qualityepoxy coatings in

black and whitebends. the details of symbol for

eachboard shall details of symbol for eachboard shall

be as per the instruction ofengineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x45 x

60cms. for each leg. including excavation curing tec.

complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)...

25 Road Marking with Hot Applied paints with 125.00 One 367.72

reflectorising glass beads on bitumin surface Sqm

providing and laying a hot applied thermoplasting

compund 2.5mm thick including reflectorising glass

beads @250 gm per sq.mtr area, thickness of 2.5mm is

excluding of surface applied glass beads as per IRC:35-

2015 the finished surface to be level, uniform and free

from streaks and holes, zebra

patta/bump/centerline/edge line/ cut patta. the

while color marking should provide liminance

coefficient on cement road shall be min.

mcd/m2/lux and asphalt road shall be min

mcd/m2/lux during the survice life during the date

the marking should meet the performanace criteria

for night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-

2015 warranty for retroreflectivity shall be two years.

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

26 Cate eye / road stud/ RPM : Supplying 60.00 One 326.23

Raised Pavement markers of polycarbonate No

and ABS moulded body and reflective panels

with micro prismatic lens (No glass bead

lens) capable of providing total internal

reflection of the light entering the lens face

and shall support a load of 13635 kgs. tested

in accordanace to ASTM D 4280 type H and

complying to specification of category A of

MORTH circular No RW/NH/33023/10-97-

DO III Dt. 11-06-1997. the height, width and

length shall be exeed 20mm, 130mm and

130mm and with minimum reflective area of

13sqcm on each side and the slope to the

base shall be 35+/-5 degree. the body of the

marker should having finger grip for easy

and accurate placement and application with

epoxy /bituminous adhesive as

recommended by the manufacturer of the

marker. the colour of the marker should be

as per the IRC:35-2015 and as directed by

Engineer-in-charge.

Rupees Sixteen Lakh(s) Sixty Seven Thousand Four Hundred Forty Three And

Paise Seventy Seven Only

Item Description of Item (With brief specification Quantity Unit Rate Amount

No. and reference to book of Specification)

I \ We am \ are willing to carry out the work at ……………………… % above \ bellow percent

( Should be written in figures and words ) of the estimated rate mentioned above. Amount of My

\ Our tender works put as under.

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

Signature of Contractor.

Deputy Executive Engineer Executive Engineer

Panchayat R&B Sub Division Panchayat R&B Division

Surendranagar Surendranagar