DEVELOPMENT OF REGIONAL CENTER OF I-HUB AT RAJKOT

Description Qty Unit Amount

Dismentalling doors, windowas, ventilators etc.(wood or steel) shutters

including chowkhats, architraves, Holdfasts and other attachments etc.

complete and stacking the materials with all lead and lift. 1) Not exceeding

Demolition of Brick work and stone masonry including stacking of

2 serviceable materilas and disposal of unserviceable materials with all 13.00 Cum 589.70 ₹

lead and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking of

3 serviceable materilas and disposal of unserviceable materials with all lead and 357.00 Smt 51.45 ₹

Dismantling santtary fittings like wash basin . W.C. pan Indian and European

4 type, flushing tank etc.including stacking the materials with all lead and lift. 23.00 Each 433.96 ₹

Removing and scraping of old deteriorated plaster of any thickness

fromm wall / R.C.C member including stacking of serviceable

material and disposal of unserviceable from site of work with all lead and

Removing dry or oil bound distemper by a washing and scraping and sand

6 papering the wall surface smooth including necessary repairs to scratches 1226.00 Smt 12.09 ₹

Providing wood work in frames of Doors, windows cleare story windows and

7 othersimilar works wrought, framede and fixed in position. (A) Indian Teak 150.00 610.23 ₹

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory

windows including Indian teak wood frames 10 cm x 7 cm. size including

8 anodized alluminium fixtures and fastenings including primer coat of 16.00 Sqm 5338.30 ₹

approved quality and two coats of oil painting etc, complete.

(ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory

windows includingIndian teak wood frames 10 cm x 7 cm. size including

anodized alluminium fixtures and fastenings including primer coat of

quality and two coats of oil painting etc, complete.

(iii) Partly panelled and partly glazed.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory

windows including Indian teak wood frames 12 cm x 7 cm. size including

10 anodized alluminium fixtures and fastenings including primer coat of 19.00 Sqm 4836.39 ₹

approved quality and two coats of oil painting etc, complete.

(i) Fully Glazed.

Providing and fixing 45 mm thick solid core single leaf flush door of

approved make having fire retardant ply facing on both sides and finished

with 4 mm thick natural veneer with PU polish finish as approved. Door

frame to be 100 × 60 mm seasoned hardwood frame fixed in position

11 complete. Door to be fitted with heavy duty SS hinges (minimum 4 nos), 5.00 NO.S 23500.00 ₹

hydraulic door closer (Geze / Dorma or equivalent), Euro profile cylinder

lock, pull handle and door stopper. Work complete including all fittings,

fixtures and accessories as per approved drawings and specifications. (At all

Single Leaf Glass Door with floor spring pivot : Providing and fixing in

position full height 12 mm thick toughened glass door with all necessary

Geze , Dorma hardware accessories as per approved selection by Architect.

12mm thick Saint Gobain make customized clear toughened glass, edge

polished prepared with stainless steel patch fittings with locking arrangement

/ fixing Each glass panel secured to the floor by stainless steel patch fitting

12 item includes all necessary fitting / fixing, fixtures- like Geze / Dorma 5.00 NO.S 21500.00 ₹

Hardware system like ( Corner hinges with pivot, Glasklar Lock, Door

Handle, Keys ,round shape lock with alluminium cover , Door Stop )

complete as per specification drawing approval and instructions of the

Architect. Rate shall be inclusive of all material loading unloading at all

height and all floor. sample mock shall be approved from Architect/EIC. (

Aluminium Sliding Window with Provision for Mosquito Mesh Track

Providing and fixing sliding window with extruded aluminium colour

anodized sections conforming to relevant IS standards, comprising main outer

frame section of size 63.50 × 38.10 × 1.95 mm (minimum weight

Kg/Rmt), two-track horizontal member of size 61.85 × 31.75 × 1.20 mm

(minimum weight 0.695 Kg/Rmt), and vertical member of size 61.85 ×

× 1.30 mm (minimum weight 0.659 Kg/Rmt). Sliding shutter to consist of

horizontal and vertical members of size 40 × 18 × 1.29 mm (minimum weight

0.456 Kg/Rmt). Glazing to be 5 mm thick transparent bronze tinted float glass

fixed with approved glazing bead and transparent silicone sealant.

Outer frame shall be provided with additional separate track provision for

future fixing of sliding mosquito mesh shutter. (Mosquito mesh shutter and

mesh not included in this item.)

Providing and fixing standared extruded of alluminium section of size

14 63mm x 38.10mm x 1.2mm ( Wt. 0.643 Kg/mt) with colour anodized 6.00 Smt 1175.56 ₹

alluminium frame for ventilation with 5 mm thick frosted glass as details

Ply palmet work : Providing and fixing wooden pelmets of upto 150mm/950

mm x 150 to 600 mm L shape made of 19mm thick ply as per IS

MR Grade and beading of 4mm thick and 25mm wide

Ghana Teak wood for curtains/blinds/projection screen of openings.

Rate to be inclusive of lipping, cutting, wastages, necessary fixtures, nails,

adhesives, necessary scaffolding, fixing at all heights and for all floors as per

drawing and approved sample etc finish with veneer semi gloss PU finsh.

(Mode of Measurements: Only the palmet length shall be measured and paid

for the items in which palmet work is not inclusive in item description)

Roller blind fabric should be made up of 30-35percentage

Fiberglass, 65- 70percentage Vinyl on Fiberglass, it should have specific

low emissivity treatment and Lead free with Greenguard Gold certification.

Fabric approved by Melanoma International Foundation (MIF), it

should cut UV rays with 97percentage approximately and

antimicrobial properties as per ASTM E 2180, ASTM G21, AATCC30

Part 3, ASTM D 3273, GREENGUARD Gold and Bacteria Standard

ASTM 6329; includes Microban antimicrobial additives. It

should have 3percentage openness, fabric thickness should be 0.50-0.55

mm, fabric weight should be 478 grams per square meter, The fabirc should

16 be Flame retardant as per California U.S. Title 19 (small scale), NFPA 701 41.00 Smt 2900.00 ₹

TM#1 (small scale), NFPA 101 (Class A Rating), IBC Section 803.1.1 (Class

A Rating), BS 5867 Part 2 Type B Performance, NFPA 701 TM#2 (large

scale), CAN/ULC-S 109 (large and small scale), CAN/CGSB2-ontrols (L)

Master faders to control over left & right output (m) Head phone output for

monitoring purpose. Technical specification (a) Power Requirement -AC220-

24OV 50 Hz DC 24 Volts (b) MIC Output Impedance/gain -2 K Ohms/ 62 dB

(c)Line Output Balance/42 dB —- 20 K ohms (d) Impedance / Gain :-

10Kohms unbalance / 42 dB (e)frequency Response - 30 Hz- 20 KHz L / R

Line Output ( + 0, -1 dB ) (f)Equalization Bass/ - + / - 12 dB at 100Hz M

Providing and laying cement concrete flooring 1:2:4 (1- cement : 2-coarse

17 sand : 4- graded stone aggregate 20mm nominal size) laid in one layer and 364.00 CUM 355.22 ₹

finished with a floating coat of neat cement. (B) 50mm thick.

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

18 Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry 376.00 Smt 1019.39 ₹

mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

Providing and laying polished Kota stone slab 25mm thick in risers of steps,

skirting, Dedo and pillars, laid on 10mm thick cement mortar 1:3, jointed

with grey cement slurry mixed with pigment to match the shade of slab,

including rubbing and polishing etc. complete.

Providing 15mm thick cement plaster in single coat on Rough (Similar) side

20 of single or half brick walls for interior plastering upto floor two level ... 1226.00 Smt 188.98 ₹

Cement mortar 1:3.

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete. Using Imidacloprid

30.5 SCas Per IS 6313 part -II( (0.075percentage concentration by mass) is

recommended 10.5ml chemical diluted with 5 liters of water application

0.5 litre chemical / Sqm of surface is recommended as per I.S.

Applying two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved

brand and manufacture on undecorated wall surface to give an even shade

23 including throughly brushing the surface free from mortar droppings and 1226.00 Smt 88.39 ₹

other foreign matter and sand

papered smooth.

Brick work using common burnt clay building bricks having crushing

24 strength not less than 35 kg./Sq.Cm. in superstructure in Cement Mortar 1:6 33.00 CUM 4924.64 ₹

(1- Cement : 6 -fine sand)(A) Modular

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4-

25 graded stone aggregates 20 mm nominal size) and curing complete excluding 10.00 CUM 3772.13 ₹

cost of formwork in (A) Foundation and Plinth

20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

Finishing wall with water proofing cement paint of on wall surfaces (Two

coats) to give an approved brand and manufacture and of required shape even

shade after thoroughly brushing the surface to remove all dirt and remains of

loose powered materials.

TYPE 01 - SIGNAGES WITH SS PLATE : Providing and fixing of the

following signages using make of cosign or equivalent approved make by

architect.All the detailed work out as per the detailed drawing and instruction

of Employer's representative/ Employer.,specifications and drawings as

indicated there in to all heights and elevation including necessary scaffoldings

/ supports /permanant fixing with cement mortor if fixed to ground etc

complete in all respects.The Signage cost should be inclusive of

panels,hanging system,bridges,primary & secondary fixings,

vinyl,painting,powder coating self glowing mateial as directed etc.All shop

drawings and coordination with other services is in scopeof contractor. Size

(125 x 400mm) - FACE /WALL MOUNTED NAME

PLATES/SIGNAGES/INFORMATION SIGNAGES (without back lit)

Providing and supplying Executive High back revolving chair made out of

MS powder coated steel tube frame base, high density molded PU with fabric

upholstery in seat and ergonomically contoured PP designed backrest of high

density PU with contrasting or matching fabric upholstery with fixed type PU

padded arm rest with heavy duty castors under structure of chair and

Polyurethane armrests confirming to IS standard and fabric as per sample

approved of Make: ERGO, BMC, ASHIRVAD, NILKAMAL, BLUEBELL,

HOF OR equivalent brand by the Architect / Engineer in Charge. including

supply, delivery and placing at all levels complete.

Mid Back -Work station :Providing and supplying medium back revolving

chair suitable for workstation use, having upholstered seat with high density

PU foam and breathable mesh back with lumbar support, synchro / knee tilt

mechanism with tilt tension control and locking arrangement, pneumatic

30 height adjustment, adjustable armrests, heavy duty nylon base with twin 100.00 Nos 11500.00 ₹

wheel castors, all complete conforming to relevant IS standards and approved

make such as ERGO, BMC, ASHIRVAD, NILKAMAL, BLUEBELL, HOF

or equivalent as approved by Architect / Engineer-in-Charge, including

supply, delivery and placing at all levels complete.

Private office table : Providing and supplying Modular Main Work Table

with Metal Mobile Drawer Unit (MDU) and Side Storage complete,

consisting of main table of size 1800 mm (L) × 900 mm (W) × 760 mm (H)

having 25 mm thick pre-laminated particle board top with 2 mm thick PVC

edge banding on all exposed edges. The main table shall be supported on 50 ×

50 mm CRCA steel tubular open type legs with epoxy powder coated finish

and provided with M.S. perforated sheet modesty panel/apron with powder

The unit shall include one metal mobile drawer unit (MDU) comprising three

drawers with central locking system, powder coated finish, mounted on four

heavy duty castors (two with locking arrangement) including all necessary

31 hardware complete. 4.00 Each 28500.00 ₹

The side storage unit of size 825 mm (L) × 450 mm (W) × 700 mm (H) shall

be made of 18 mm thick pre-laminated particle board with 2 mm thick PVC

edge banding on all exposed edges, provided with hinged shutter of 18 mm

thick board fixed on auto hinges, multi-lock systeoating. (The rates excludes

the cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved

manufacturers with following size. (C) The standard companies switch gear

shall be used and only manufacturers as per IEC

Providing and supplying Executive Conference Table of size 4800 × 1500 ×

750 mm (16–17 seater) as per approved drawings.

Table top made of 25 mm thick HDHMR / BWR grade plywood finished

with 1.0 mm high pressure laminate on both sides and 2 mm PVC edge

banding on all exposed edges.

Supported on heavy duty fabricated 50 × 50 mm CRCA steel frame

(minimum 1.6 mm thick) with intermediate bracing.

Steel frame finished with epoxy powder coating of minimum 60–80 microns

Including M.S. perforated modesty panel with powder coated finish.

Providing concealed cable tray system for wire management.

Including minimum four wire manager grommets and provision for

power/data box.

Complete with levelling adjusters, fittings and necessary hardware.

Rate inclusive of fabrication, transportation, installation at all floor levels and

finishing complete.

Make: FEATHERLITE / GODREJ / HAWORTH / HOF / Equivalent

Providing and fixing PVC vinyl wooden flooring (plank type) of minimum

mm / 3 mm thickness with wear layer not less than 0.3 mm suitable for office

and conference room use, having anti-skid, anti-static and fire-retardant

properties conforming to relevant standards. Flooring to be installed over

prepared and levelled surface using approved adhesive system complete with

edge trimming and finishing. Rate shall include material, adhesive, labour,

cutting, wastage and installation complete in all respects.

Partitionwork:Providingandfixinginpartitionfloortoceilingheightedpartitionw

orkwithallnecessaryfittingsasperapprovedselectionbyArchitects.12mmthick

plywood/MDf with 4mm venner/Lamiante/color finish as per

selection.Ratetobeinclusiveoflipping,cutting,wastages,necessaryfixtures,nails,

adhesives,necessaryscaffolding,fixingatallheightsandforallfloorsasperdrawing

andapprovedsampleetcfinishwithveneersemiglossPUfinsh.(Mode of

Measurements:Only thepartition height shall be measured and paid for the

items in which partition work is not inclusive in item description)

Aluminium Sliding Mosquito Mesh Shutter (Fibre Mesh)

Providing and fixing aluminium sliding mosquito mesh shutter to suit

existing aluminium window frame, fabricated from light duty aluminium

sections (minimum 1.0–1.2 mm thick) with fibre insect mesh securely fixed

within shutter frame. Shutter to run on nylon rollers in separate mosquito

track, complete with handle and necessary fittings. Rate shall include cutting,

fabrication, fixing, adjustments, labour and installation complete in all

respects. Measurement shall be in Sq.m of actual mesh area.

Providing, supplying and placing in position two-seater sofa of approved

make and design, size approx. 1300–1500 mm (L) × 750–850 mm (D) ×

800–900 mm (H), constructed with internal frame of seasoned hardwood

(moisture content not exceeding 12%) and commercial grade plywood

(minimum 12 mm thick), including seat and back cushions made of high-

density polyurethane foam (minimum 32 kg/m³ for seat and 24 kg/m³ for

36 back), supported on elastic webbing/belt system. 8.00 NO.S 24500.00 ₹

The sofa shall be upholstered in approved quality fabric/leatherette (minimum

350 GSM or equivalent), including armrests, backrest, seat base,

wooden/powder-coated metal legs (minimum 50 mm height), proper

stitching, finishing, and all necessary fittings complete as directed by

Engineer-in-charge.

Providing, supplying and installing modular office workstation/cubicle

system comprising four interconnected workstation seats in 2×2 arrangement,

each having approximately 1200 mm × 600 mm worktop and approximately

1200 mm high partition/divider panels; comprising 25 mm thick commercial

plywood worktop finished with 1.00 mm thick approved decorative laminate

on top and bottom faces, with neatly finished matching laminate/approved

edge treatment; approximately 50 mm thick sandwich-type side/divider panels

comprising 4 mm thick commercial plywood facings on both sides with

approved internal supporting core/frame maintaining the required overall

thickness, finished with 1.00 mm thick approved decorative laminate on

exposed faces; CRCA fabricated supporting framework using suitable

37 sections/thicknesses, including main load-bearing members of minimum 1.5 32.00 9210.00 ₹

mm thick CRCA sheet/section, duly welded/fabricated, ground and finished

with epoxy/polyester powder coating of minimum 50–60 micron dry film

thickness; includinoating. (The rates excludes the cost of switchgears, bus

bars, inter connecting mains & Copper Aluminium strips, meters, Fuses etc.

The dimension shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with following size. (C) The

standard companies switch gear shall be used and only manufacturers as per

IEC 61439 for beneficial use. (ii) with 550 mm. Depth

(2 Nos. panels to be supplied, 1 Sq.Mtr each)irection of Engineer-in-Charge.

Chair excluded.

Pro. And fixing single layer water proof gypsum board 12.5 mm thick

sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size 25 mm x 3 mm with intermediate

channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center

ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and

perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges &

drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting

cleat,joining compound top coat on ceiling incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail drawing as directed

Providing, supplying, fabricating and fixing outdoor illuminated 3D acrylic

letter signage board of overall size 5'-0" × 4'-0", displaying “i-Hub / Regional

Center / AVPTI Rajkot”, comprising 3 mm thick exterior-grade ACP backing

panel with duly fabricated and powder-coated MS supporting frame and

decorative perimeter border, 3D acrylic letters of approved colour, finish and

minimum 30 mm depth/projection, with the “i” in approved red colour and

remaining lettering in approved colour, provided with high-efficiency 12 V

DC LED modules for uniform halo/back illumination, suitable weather-

39 protected LED driver/SMPS of adequate capacity with minimum 20% spare 2.00 Each 27870.00 ₹

capacity, concealed internal wiring, connectors and electrical accessories,

mounting brackets, fasteners, sealant, edge finishing, necessary supports and

complete weatherproofing, including external LED spotlights over the

signage wherever shown in approved drawing, fabrication, transportation,

lifting, installation, testing and commissioning complete in all oating. (The

rates excludes the cost of switchgears, bus bars, inter connecting mains &

Providing and fixing wash down water closet (European type, W.C. Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid

for separately)(A) vitreous China Pattern :(i) in white colour

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I.

or Mild brackets, complete with fittings such as lead valve less syphon, 15mm

nom.nal size brass ball valve with polythene float, C.P brass handle unions

and couplings for connections, with inlet, outlet and overflow pipes, 40mm

dia. porcelain enamelled flush bend including cutting holes in walls and

making good the same connecting the flush bend with cistern and closet

(overflow pipe to be measured and paid for separately)(A) Vitreous China (I)

In white colour

Providing and fixing concealed dual flush PVC flushing cistern of 6/3 litre

capacity suitable for European W.C., to be installed inside wall including

42 cistern tank, inlet valve, outlet pipe, dual push actuator stainless steel (S.S.) 8.00 Each 4000.00 ₹

plate, supporting frame/brackets, connections and all necessary fittings

including cutting and making good the wall complete.

43 Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan 8.00 Each 42.88 ₹

Providing and fixing plastic seat and cover for wash down water closer with

44 C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover. 8.00 Each 291.33 ₹

45 Health Fauset Heavy duty with hook with fitting 8.00 No. 582.03 ₹

Providing and fixing washbasin with single hole for

pillar tap with C.I. or M.S. brackets painted white

including sutting holes and making good the same

but excluding fittings.(A) Vitreous China:(ii) Flat

Back washbasin 550 mm x v 400mm size. (i) In

Providing and fixing pillar tap, capstan head, screw

47 down high pressure with screws, shanks and back 8.00 Each 308.73 ₹

nuts. (i) 15mm dia.

Providing and fixing C.P. brass waste for wash basin or sink. (A) 32mmdia.

Providing and fixing chromium plated, bottle trap

49 with necessary couplings of approved quality for 8.00 Each 295.80 ₹

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior

50 glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to 8.00 Each 859.41 ₹

wooden pluge with C.P. brass screws and washers

Providing and fixing Urinal or approved quality including conecting the

51 Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back or 5.00 Each 1074.86 ₹

corner type size 430mm x 260mm x 350mm.

Providing and fixing chromium plated brass half trun flush cock of approved

quality including fixing in pipe line etc. complete.(i) 20mm dia.

53 C.P. Angle stop cock 15 mm Heavy duty with cap 16.00 No. 407.42 ₹

54 C.P. Bib cock 15 mm Heavy duty with cap 16.00 No. 400.58 ₹

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

56 potable water of following dia. nominal bore tube fittings and clamps 50.00 Rmt 208.80 ₹

including making good the wall, ceiling and floor etc. complete. [B] 20 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

57 potable water of following dia. nominal bore tube fittings and clamps 40.00 Rmt 253.82 ₹

including making good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixin the same with adhesive solvent,

including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C

(Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each

59 other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of 50.00 Rmt 918.67 ₹

the size 110 mm diametre x 149 mm length x 145 mm heigh at every

mm center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all

Providing, laying and jointing in true line and level 160 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of

the size 160 mm diametre x 210 mm length x 196 mm heigh at every

mm center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all

Providing and laying (to level or slopes) and jointing with stiff mixture of

61 Cement Mortar in proportion 1:1 Salt glazed stoneware pipes including 20.00 Rmt 317.46 ₹

testing of pipes and joints complete.(B) 150mm dia.

Providing and laying Cement concrete 1:5:10 (1- Cement : 5-Fine sand :10-

Graded stone aggregate 40mm nominal size) bedding for stoneware pipes of

following internal diameters with necessary formwork and curing

complete.(B) 150mm dia. (166mm Ave. bed thickness)

Extra over item For above for providing salt Glazed stoneware fittings.(i)

63 Bends of required degree (any redious) of following nominal diameters.(B) 4.00 Each 63.79 ₹

Extra over item 24.1 for providing salt Glazed stoneware fittings.(iii) Single

Junction of required angle of following internal diametrs. (B) 150mm.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber

and water tight C.I. cover with frame of 300mm x 300mm size (inside) with

standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends

with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

66 and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- 3.00 Each 3660.76 ₹

coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete etc. complete.(ii)

Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse

sand : 4-graded stone aggregate 20mm nominal size) foundation concrete

1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside

plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse sand)

finished with a floating coat of neat cement and making channels in cement

concrete 1:2:4 mix (1- Cement :2-Coarse sand :4-stone aggregate 20mm

nominal size) finished smooth complete including curing and festing (i)

Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with

frame size 560mm diameter total weight of cover and frame to be not less

than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm

thick walls of brick msonry using brick having crushing strength not less than

35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type

depth 0.90 Metre for 150mm diameter sewer.

68 C.I. Cover with frame 300mm x 300mm 10.00 Each 400.58 ₹

69 C.I. Nahni trap 10.00 Each 136.10 ₹

70 Cast iron grating 100mm dia. 10.00 Each 31.67 ₹

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x

mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white

Providing and fixing eco-friendly light weight calcium silicate false ceiling

tiles having Tegular edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity0.043° w/m

KC.for the best thermal Insulation . The Light weight calcium

Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos

having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true horizontal level suspended

inter locking metal grid of hot dipped galvanized steel sections (galvanizing

@120 grams per sqm including both side) consisting of main ‘T’ runner

suitably spaced at joints to get required length and size of 24X38mm made

from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross

‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm

along spaced bontrols (L) Master faders to control over left & right output

(m) Head phone output for monitoring purpose. Technical specification (a)

Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b) MIC Output

Impedance/gain -2 K Ohms/ 62 dB (c)Line Output Balance/42 dB —- 20 K

ohms (d) Impedance / Gain :- 10Kohms unbalance / 42 dB (e)frequency

Response - 30 Hz- 20 KHz L / R Line Output ( + 0, -1 dB ) (f)Equalization

Bass/ - + / - 12 dB at 100Hz Mid / Treble 2 KHz / 10 KHz (g) Outputs, Line

Output Line Output Low : - 10 dB / -2 dBM Line Output High : 0 dBM / +17

dBM (775 mv / 5.5 V ) (h) S/N ratio Line Output Level : > 70 dB (0 dB,

0.775V) The Console shall be mounted on standard Rack, The channel of

following numbers.

(B) 9 Channel Audio Mixer with ECHO wherever

Providing and fixing 30mm thick factory made moulded door shutter wood

free consisting of frame made out of M.S. tubes of 19 gauge thickness and

size of 25mm x 25mm for stiles, top and bottom rails, M.S. frame shall have a

coat of steel primers. The inner panel shall consist of 25mm thick High

Density EPS conforming to IS 4671-1984 bonded with 2mm thick termite

proof, water proof and fire resistant moulded PVC sheet with 2,4,6 raised

panel design in different plain and /or prelim colours after routing the

moulded design on one side and 2mm

plain and/or prelim PVC sheet on other side of the EPS. The edges of panel to

be sealed with lipping of 10mm wide PVC sheet batton (made by sticking

PVC rigid foam sheets of 5mm thickness using PVC solvent cement) and

stiles 25mm (5mm x 5) thick and 30mm width PVC sheet fitted along M.S.

tube for lock provision and for lock height 5mm thick PVC sheet of size

150mm x 100mm fixed with upper and lower face of inner side of EPS panel

etc. complete as per direction of Engineeroating. (The rates excludes the cost

Providing and fixing factory made polyvinyl chioride (PVC) door frame of

the size 50 x 47 mm with a wall thickness of 5mm, made out of extruded

5mm rigid PVC foam sheet, mitre out of two corners and joined with 2nos. of

150mm long brackets of 15 x 15mm M.s. Square tubes. The two vertical door

profiles are to be reinforced with 19 x 19 mm m.s. square tube of 19 gauge,

74 EPDM rubber gasket weather seal to be provided through out the frame. The 10.00 sqm 318.03 ₹

door frame shal be fixed to the wall using 65/100 mm long M.S. screws

through the frame by using PVC fasteners. A miniumum of 4 nos. os screws

to be provided for each vertical members and minium 2 nos. for horizontal

members etc. complete as per manufactures specification and direction of

Engineer in charge.

75 S.S. Door / Window hinges 4x3/4"x3/4" 200.00 Each 22.25 ₹

76 S.S. Stopper 20 Cm long of ASIS 304 20.00 Each 127.53 ₹

Providing and fixing stainless steel occupied/vacant indicator lock for toilet

door suitable for PVC door shutter including sliding bolt mechanism,

red/green indicator plate, necessary screws and fittings, complete fixing and

installation as directed by Engineer-in-charge.

78 Providing and fixing C.P. brass towel ring including fixing complete 8.00 Each 363.60 ₹

79 Providing and fixing SS robe hook on toilet door including fixing complete 8.00 Each 141.40 ₹

Polishing with french polish on new wood and wood based

surface to give an even surface including cleaning, the

surface of all dirt, dust and sand papering smooth and

including a coat of wood filler.

Point wiring for Light / Bell with 2-1.5 sq.mm and earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length , in below type of pipe

erected with 6A Modular type switch / bell push and accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.(a) with

medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete,Cat. III

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 kV grade FRLS

PVC insulated multi strand copper wires, in below type of pipe to be erected

complete with earth continuity and necessary connection with primary light

82 with accessories erected on Metal / PVC / wooden box covered with 3 mm 60.00 Pt. 158.57 ₹

thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with

necessary Lamp holder / ceiling rose / H.D.Connector as directed. (a) with

medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

Point wiring for FAN with 2-1.5 sq.mm and earthwire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in / flushed on

wall/ceiling complete with 6A Modular type switch and hum free EME four

or more step type electronic fan regulator with separately mounted and

83 accessories with earth continuity of following type erected on PVC / 10.00 Pt. 765.58 ₹

Metallic box, single mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.(a) with medium class Rigid PVC

pipe and accessories erected flushed on wall/ceiling complete,,Cat. III

Point wiring for Individual Plug with and earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete with

Modular type switch and 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in wall / ceiling as

per pipe erected with following type of accessories.[I] For 6A Plug and

a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

board,(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete,Cat. III

Point wiring for Individual Plug with and earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete with

Modular type switch and 5 pin Plug erected on PVC / Metallic/Wooden box

85 covered with appropriate front plate modules erected on / in wall / ceiling as 18.00 Pt. 853.45 ₹

per pipe erected with following type of accessories.[II] For 16A Plug and

16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.,(a) with

medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete,Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch

and 5 pin socket erected on PVC / Metallic/Wooden box, single mounting

86 base frame covered with textured / metallic/white front plate modules erected 24.00 Pt. 309.06 ₹

on / in wall / ceiling with following type accessories,Cat. III

Providing and erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with

PVC / Metallic concealed/open box with single mounting

87 base frame covered with textured/metallic /white front plate,modules 40.00 Ea. 1,133.22 ₹

erected with necessary connections as directed 1 no. 6A/16A universal plug-

switch combined. 3 nos. 6A Switch 3 nos. 6A 5 pin Plug ,For Modular Type

Accessories, Cat. III

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

88 with textured / metallic/white front plate , modules erected with necessary 45.00 Ea. 160.59 ₹

connections as per site situation directed by Engineer In charge.(8) Computer

RJ-45 socket ,Cat.III

Providing & Erecting eight module pop up floor box/flushed with table

surface Conform to IEC 60670-1, IEC 60670-23 & IEC 60884-1 with

required items as demanded by engineer in charge with complete finishing

Supply& installation of modular type accessories for UPVC snap-on

adaptable trunking/Popup Box with required items erected with necessary

connection. As desired by Engineer In charge

i) 6 A SP 1 Way Switch cat-III

Supply& installation of modular type accessories for UPVC snap-on

adaptable trunking/Popup Box with required items erected with necessary

91 connection. As desired by Engineer In charge 10.00 Ea. 350.47 ₹

iv) 6A universal socket shuttered cat-III

Supply& installation of modular type accessories for UPVC snap-on

adaptable trunking/Popup Box with required items erected with necessary

92 connection. As desired by Engineer In charge 5.00 Ea. 566.61 ₹

vi) Cat-6 LAN Socket cat-III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

93 necessary PVC fittings and Junction boxes fixed with adhesive solution and 250.00 Mtr. 24.24 ₹

Clamps with following dia of pipes, in approved manner as directed ,(a)20

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

94 necessary PVC fittings and Junction boxes fixed with adhesive solution and 750.00 Mtr. 33.33 ₹

Clamps with following dia of pipes, in approved manner as directed ,(b)25

Providing and erecting PVC Corrugated Flexible Conduit with required

95 nos. of coupling, PVC bushes, Check-nuts etc. complete of following 50.00 Mtr. 17.17 ₹

sizes.(1) 20 mm

Providing and erecting PVC Corrugated Flexible Conduit with required

nos. of coupling, PVC bushes, Check-nuts etc. complete of following

sizes.(2) 25 mm

Supplying under floor pregalvanised corrosion proof rectangular sheet steel

cable trunking of 1.6 mm thick having with stand point load up to 1.33 Ton &

free from seepage of concrete of screed water with all accessories,Junction

Box,Joints as required and demanded by engineer-incharge and

laying/erecting as per OEM guidelines and as per instruction of engineer

incharge having following size of dimensions and No of compartments (W x

D x T) Cat-III [4] 225mm x 25mm x 1.6 mm with Three Compartment

Supply & installation of surface mounted U PVC snap-on adaptable trunking

raceways, fabricated out of U-PVC to Off-White or approved shade as per IS

733 of thickness 2.0mm for the base and sides with all accessories like

removable covers, joints ,height spacer,angles complete with necessary bends,

98 suitable sized junction boxes and tees etc, Complete. 25.00 Mtr. 1,062.52 ₹

(a)Size: 50x80mm PVC Raceways for Power & Data with 2 compartments

above specifications.

Providing and erecting Mains with 1.1KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in / flushed on wall /ceiling, with 1.5sq.mm copper

99 conductor FRLS PVC insulated stranded wire of green colour for earth 500.00 Mtr. 78.78 ₹

continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size ,(A) With medium class Rigid PVC pipe and

accessories,(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall

/ ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size(A) with

medium class Rigid PVC pipe and accessories,(a) 2 wire 4 sq. mm

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 and 3, IEC 61439-1 and 3 without MCB to house

102 appropriate nos. of MCBs.(The DBs should be used of same company of 2.00 Ea. 2,913.85 ₹

MCB to be used) suitable for(B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI),(b) sheet steel

double door (ii)6 way

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 and 3, IEC 61439-1 and 3 without MCB to house

103 appropriate nos. of MCBs.(The DBs should be used of same company of 2.00 Ea. 3,412.79 ₹

MCB to be used) suitable for(B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI),(b) sheet steel

double door,(iii)8 way

Providing & erecting weather proof, dust & vermin proof, floor mounted

front operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions

& cable alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber grommets,

rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip complete.

The Panel shall be painted with epoxy powder coating. (The rates excludes

the cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved

manufacturers with following size. (C) The standard companies switch gear

shall be used and only manufacturers as per IEC 61439 for beneficial use. (ii)

with 550 mm. Depth

(2 Nos. panels to be supplied, 1 Sq.Mtr each)

Supplying and erecting triple pole & neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports /insulators, main

cable socket to each bar, erected in existing cubical panel with necessary

connections. (B) Suitable for 200 Amp. capacity

Supplying and erecting triple pole & neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of following current

carrying capacity, erected with necessary bus bar supports /insulators, main

cable socket to each bar, erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories (i) 4 wire 10 sq. mm

(use earth wire of 4 sq.mm )

providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories (h) 4 wire 6 sq. mm

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal and magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper and complete erected in existing 16 G.M.S.

housing. ICS=100percentage of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal & magnetic release suitable to

work on A.C.supply 50 Hz. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.housing ICS=100% of ICU

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B

111 curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 10.00 Ea. 702.96 ₹

having following capacity (b)40 Amp. Cat.III

providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as directed (ii)

40Amps. DP Cat. III

providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as directed

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B'

grade G.I. pipe with necessary coupling buch buried in specially prepared

earth pit & G.I. earth wire of 8 SWG erected & connected as directed (For

116 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 5.00 Kg. 794.87 ₹

Providing & erecting Approved make Power Saving 45 - 50 Watt Ceiling Fan

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

117 mm sweep complete having 3blades with aluminium blades with , canopy & 15.00 Ea. 1,948.29 ₹

30 cm. down rod erected with earthing.(Make shall be approved by Engineer

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

118 down rod erected duly painted for fan complete with proper insulation 15.00 Mtr. 108.07 ₹

without leakage and earthing.

Supplying and erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC

slab with Making the site as original.

Supplying & erecting approved make low noise decorative exhaust fan having

120 square frame ABS body with inbuilt lowers & square frame. 250mm with 10.00 Ea. 1,703.87 ₹

1350 RPM Cat.II

Supplying and erecting approved make oscillating type medium duty bracket

fan with Aluminium Blades A.C. 230V. 50 Hz wall mounted with height

121 adjustment and rotary tilting device complete with guard, mounting 10.00 Ea. 2,352.29 ₹

accessories kit, pull cord for speed and oscillation flexible Core plug top

complete erected with lead wires as directed. (a) 400mm

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2Watt to

0.5Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure diecast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160Vto270V, Power Factor more than 0.95,THD 85 lumens/watt , LED

driver efficiency > 85 % ( fitting required LM-79 & LM-80Certificates)

(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the

(A) Square/ Circular shaped Surface/Recessed Mount

Down light with provision for spring loaded mounting clips complete.IP20

(iv) 22-24 watts, Surge-2 KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. and corrosion resistance

with diffuser housed in aluminium casted body with company

mark/name 160V to 270V,Power Factor more than 0.9, THD <

percentage, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 percentage ( fitting required LM-79 and LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(B) LED Panel Light with provision

for Plane front frame with translucent cover fixed to housing

complete.IP20,(vi) 36 watts, 24" x 24", Surge- 2KV,Cat-lll

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die

cast aluminum housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (B) Flood Light (IP-65), Surge

protection -4kV integral and ,Light must have 440VAC line supply with over-

voltage protection. (vii) 200 - 250 watts Cat-lll

Providing and erecting Inverter based approved make split air-conditioning

unit consisting of condensing unit with variable speed fan motor, inverter

type hermetically sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper tubing,drain

PVC pipes suitable for ( cost includes Eco Friendly green gas charging and

15A plug top & Remote Control & MS Stand) with necessary core cutting.

(2)For ISEER Range (KWH/KWH)(4.0 to 4.49) (A) for 0.8 to 1.0 ton

capacity- Premium Cat.

Providing and erecting Inverter based approved make split air-conditioning

unit consisting of condensing unit with variable speed fan motor, inverter

type hermetically sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with its

126 accessories by means of extra supplied proper insulated copper tubing,drain 11.00 Ea. 79,620.32 ₹

PVC pipes suitable for ( cost includes Eco Friendly green gas charging and

15A plug top & Remote Control & MS Stand) with necessary core cutting.

(2)For ISEER Range (KWH/KWH)(4.0 to 4.49) (C) for 1.7 to 2 ton capacity-

Supplying and erecting insulated pair of soft copper tubing open or concealed

127 including power and control cable,necessary PVC drain pipes for 100.00 Rmt. 1,158.47 ₹

Split/Cassette AC machine up to 4 TR capacity

Supplying and installing MS angle , powder coated / Painted standard type of

wall/floor stand mount for outdoor unit of split AC of following capacity,

128 erected with necessary hardware materials as directed. (A) 15.00 Ea. 1,318.05 ₹

25mm*25mm*3mm thick M.S angle suitable for up to 2 TR. Capacity of ac

Dismantling the existing light, fan, bell, independent plug point, wiring with

129 mains of all types along with accessories etc. complete and handed over to 100.00 Pt. 1.01 ₹

Refilling the holes for dismantled point with cable with cement mortar &

finishing in an approved manner.

131 Dismantling the existing cables of all types & sizes 100.00 Mtr. 6.06 ₹

Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan

132 complete with accessories, G.I. down rod, frame etc. and making the site 100.00 Ea. 9.09 ₹

133 Dismantling the existing any type of indoor light fittings 100.00 Ea. 5.05 ₹

Supplying and erecting approved make LAN cable of following size in

existing pipe as per direction,[C] CAT -

SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo

ports Advanced L2 switching and security features L2+ Static Routing

135 Optional “standard mode” or “surveillance mode” management user interface 2.00 Ea. 31,996.80 ₹

193 W PoE budget [Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag less

136 [Approved by Competent Authority i.e. not Below the rank of Executive 80.00 Ea. 156.55 ₹

SITC of Jack Cat 6 Keystone UTP [Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ]

SITC of Face Plate - Single (Keystone Jack,square) [Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded

139 [Approved by Competent Authority i.e. not Below the rank of Executive 2.00 Ea. 4,400.57 ₹

Supplying & erecting Mixing Console having channels, Audio mixer with.

Echo facility for live performance, Auditorium & stadiums, having following

features & facilities. [[Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ]

(a)input Channels :- Each channel has separate 6.25mm size balanced phone

jack for mike & line for balanced & unbalanced signals. (b) Individual gain

control for sating optimum level for minimum noise. (c) BASS, MID &

TREBLE ‘ controls Separately for each input channel. (d) ECHO control for

each channel (e) PAN control for echo channel for left or right output (f)

AUX Control : To control , level of the channe+B57 in final mix to AUX

sound output (g) Channel ON/OFF switch (h) ECHO Section :- ECHO,

reverb & Chorus effect can be added to all input channel by different setting

of Delay, Reverb & Level control. (i) Tape section (j) Aux. send & return For

sending Pre-feeder output of channel for monitoring or adding a special effect

unit. (k) Mono / Stereo output controls (L) Master faders to control over left

& right output (m) Head phone output for monitoring purpose. Technical

specification (a) Power Requirement -AC220-24OV 50 Hz DC 24 Volts (b)

MIC Output Impedance/gain -2 K Ohms/ 62 dB (c)Line Output Balance/42

dB —- 20 K ohms (d) Impedance / Gain :- 10Kohms unbalance / 42 dB

(e)frequency Response - 30 Hz- 20 KHz L / R Line Output ( + 0, -1 dB )

(f)Equalization Bass/ - + / - 12 dB at 100Hz Mid / Treble 2 KHz / 10 KHz (g)

Outputs, Line Output Line Output Low : - 10 dB / -2 dBM Line Output High

: 0 dBM / +17 dBM (775 mv / 5.5 V ) (h) S/N ratio Line Output Level : >

dB (0 dB, 0.775V) The Console shall be mounted on standard Rack, The

channel of following numbers.

(B) 9 Channel Audio Mixer with ECHO

Supplying microphones stands with sturdy mechanism, treble free movement

& positioning of microphones, free from rust with superior quality of chrome

plating with following size. [Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

(c)Fixed height 91 cms. & extendable up to 62 cms. with round base of dia.

Supplying , installing & testing approved make Microphone for Speech,

Music, & Close to lip singing with inbuilt protection against breath & wind

noise with capability to capture sound from long distance & wide area with

142 frequency response 50 - 16000 Hz, having sensitivity 1.8mv / Pa & 4.00 Ea. 2,654.28 ₹

impedance 430 ohms(Lo -Z) supplied with quick detachable holder, 6 Mtr

long. Twin core cable & 3 pin XLR connector. [[Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

Supplying & testing wireless microphone system for 92.5 MHz FM operation

With effective range 200 feet with microphone having facility for frequency

143 adjustment & receiver with LED indicator Telescopic antenna with battery 2.00 Ea. 1,884.66 ₹

cells.[[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

SITC of Power amplifier, 480W

High‑efficiency professional Class‑D power amplifier, minimum 480 W

continuous at 100 V line for distributed PA / auditorium loudspeakers,

operating on 230 V, 50 Hz AC. Unit shall provide balanced line‑level input

with input gain control, 100 V (and 70 V / low‑Z where available) outputs,

clip/signal/power status indication, and protections for overload, short circuit,

DC at output, over‑temperature and mains surge. Amplifier shall be 19‑inch

rack‑mountable with adequate cooling and shall comply with relevant safety

and EMC standards, approved by Competent Authority not below the rank of

Executive Engineer.

SITC of Cabinet loudspeaker, 30W, black High-fidelity music and speech

reproduction Selectable 8 ohm, 70 V and 100 V inputs Compact yet robust

145 ABS enclosure Supplied with adjustable mounting bracket Complies with 6.00 Ea. 13,399.67 ₹

international installation and safety regulations [Approved by Competent

Authority i.e. not Below the rank of Executive Engineer ]

Supplying and erecting approved make surge/spike suppressor having 3 out

lets of 1.8 AMP each complete erected.

Supplying and erecting approved make Single phase power conditioners

suitable for input voltage 180V / 280V, output voltage 220V (+ / - 10%) AC

50 ‘Hz with electronic relays & component of housed in sheet metal cabinet

‘with epoxy powder coated, with high - low cutoff, time delay, voltmeter,

selector switch, 5/15 A universal socket with range off

Fabricated steel equipment rack / cabinet for auditorium sound system,

floor‑standing, minimum internal usable height 24U, suitable for mounting

mixer‑amplifier, power amplifier, music source, UPS and accessories, made

from minimum 16G CRCA sheet with ventilated front door, rear access door,

side ventilation louvers, cable entry at rear/bottom, provision for earthing,

powder‑coated finish, complete with necessary angle supports, hardware, and

base frame, approved by Competent Authority not below the rank of

Executive Engineer.

Multimedia projector (short throw, LCD/DLP technology) with native

resolution 1920×1080 (Full HD), minimum brightness 4000 lumens and

contrast ratio minimum 5,00,000:1, laser light source with minimum life of

20,000 hours in normal mode, short throw ratio approximately 0.45–0.9 with

zoom facility, manual/automatic keystone correction, inbuilt speaker of

minimum 10 W, multiple input/output ports including minimum 2×HDMI,

RGB input, audio in/out, video input, USB Type-A and Type-B, Wi-Fi

connectivity, wireless screen sharing and LAN port, suitable for 210–240 V,

50 Hz supply with maximum power consumption not exceeding 300 W, noise

level not exceeding 38 dB in normal mode, BIS registered under CRS of

MeitY, with minimum 3-year on-site warranty for projector and minimum

years or 12,000 hours warranty for light source, and the rate shall be inclusive

of supplying, fixing/installation, testing, commissioning, making the system

operational and providing necessary on-site training to the end-user staff in

operation and basic troubleshooting of the projector, complete as directed.

Supply, providing, installation, testing & commissioning of automatic

motorized projector screen, 150 inches diagonal, 16:9 aspect ratio, suitable

for front projection, with high-quality matte white projection fabric/screen

surface suitable for Full HD/UHD/4K and 3D projection, with black

masking/border and black backing for improved image contrast and

prevention of light penetration. Screen shall be provided with suitable

metal/aluminium casing/enclosure and electrically operated motorized roller

mechanism, complete with limit switches for smooth and reliable up/down

operation, operated through wired wall switch and/or wireless remote control.

150 The screen shall be suitable for wall or ceiling mounting as per site 1.00 Ea. 13,365.00 ₹

conditions, operate on 230 V AC supply, and be complete with all necessary

mounting brackets, hardware, electrical connections, accessories and fixing

arrangements. The work shall include installation, testing, commissioning and

performance verification of the complete system, including demonstration and

user operation instructions, all as per manufacturer's specifications, drawings

and directions of the Engineer-in-Charge. The complete system shall be

covered by a minimum 1 year warranty against manufacturing defects and

workmanship from the date of commissioning.

SITC of universal Projector mounting kit, with necessary grouting, fasteners

etc. with adjustable height and suitable for all types of projectors. [Approved

by Competent Authority i.e. not Below the rank of Executive Engineer ]

Supply, Installation Testing & Commissioning 15 Mtr. HDMI Interface

152 Cable as per the detailed Specifications supports transmission of 4K Signals 1.00 Ea. 1,777.60 ₹

as per the detailed Specifications

Supplying & erecting recess wall mounting speaker with 5W rated input

power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz frequency response

with 6 inch dia. cone type 8 ohms speakers duly fitted in ABS plastic cabinet

of colour match with wall or ceiling of following size. [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer ]

(a)Round Shaped, 230mm dia. Speaker