Construction of New Rest House at Prantij, Dist. Sabarkantha.

Name of work :-

Construction of New Rest House at Prantij,

Dist. Sabarkantha.

Bill of Quantities

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

1 Excavation for foundation upto 1.5 m depth including 624.00 Cum 122.99

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

2 Excavation for foundation upto 1.5 m depth including 964.90 Cum 157.08

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(B) Dense or

3 Excavation for foundation for depth from 1.5 m to 3.0 m 255.30 Cum 170.40

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

4 Filling available excavated earth (excluding rock) in 1761.00 Cum 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

5 Filling in plinth with sand under floors including watering 111.00 Cum 481.81

ramming, consolidating and dressing complete

6 Filling in foundation and plinth with murrum or selected 333.00 Cum 294.39

soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete.

7 Providing and laying controlled cement concrete M.150 for 362.00 Cum 4327.85

curing complete including cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

(A) Foundations, footings,Base of columns and Mass

8 Providing and laying controlled cement concrete M.250 374.00 Cum 4760.54

and curing complete including cost of formwork but

excluding the cost of reinforcement for reinforced concrete

work in (A) Foundations, footings, Base of columns and

9 Providing and laying controlled cement concrete M250 and 44.00 Cum 8287.05

curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, pillars posts and struts Column Up to

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

10 Providing and laying cement concrete 1:4:8 (1- Cement : 4- 45.00 Cum 3322.90

coarse sand : 8- Machine Crushed stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

11 Providing and laying controlled cement concrete M.250 140.00 Cum 5988.29

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work for Ground and Plinth Beams

12 Providing and laying controlled cement concrete M.200 77.00 Cum 8172.43

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Columns, Pillars posts and struts, For All Floors.

13 Providing and laying controlled cement concrete M.200 64.00 Cum 6087.82

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Beams For All Floors.

14 Providing and laying controlled cement concrete M.200 107.80 Cum 6938.74

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Slab for All Floors.

15 Providing and laying controlled cement concrete M.200 17.00 Cum 6378.48

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Lintels For All Floors.

16 Providing and laying controlled cement concrete M.200 7.00 Cum 6949.03

and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Chajja For All Floors.

17 Providing and laying controlled cement concrete M.200 4.00 Cum 6856.54

and curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (E)

Staircases For All Floors

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

18 Providing TMT Bar FE 500D reinforcement for R.C.C. 99559.00 Kg. 77.29

work including bending, binding and placing in position

complete for All Floor

19 Providing throating or plaster drip and moulding to R.C.C. 76.00 Rmt 43.08

Chhajja by making 5mm to 15mm wide grove as per design

20 Brick work using Common Burnt Clay building bricks 476.00 Cum 4495.99

having crushing strength not less than 35 kg./Sq.Cm. in

Super structure Above plinth level up to All Floor levels in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)

21 Half brick masonry in common burnt clay building bricks 136.00 Sqmt 684.20

having crushing strength not less than 35 Kg/Sq.Cm. in

Superstructure above plinth level upto All Floor level in

Cement mortar 1:4 (1- Cement : 4 -coarse sand )

(Conventional).

22 Providing & Fixing Chicken mesh for joint between brick 496.00 Sqmt 173.72

work & RCC work fixing with nail & GI washer as per

director in charge

23 Providing 15mm thick cement mala plaster in single coat 2838.00 Sqmt 235.32

on Rough (Similar)side of single or half brick walls for

interior plastering and finished even and smooth fininshing

with a floating coat of neat cement slurry in (i) Cement

mortar 1:3 (1-cement:3-sand), Complete for All Floors.

24 Providing 10mm thick cement mala plaster in single coat 1057.00 Sqmt 215.31

on brick/concrete walls for interior Ceiling plastering and

finished even and smooth fininshing with a floating coat of

neat cement slurry in (i)Cement mortar 1:3 (1-cement:3-

sand). Complete for All Floors.

25 20mm thick sand faced Exterior cement plaster with Gutka 2182.00 Sqmt 327.24

Finish on walls upto height 15 metres above ground level

consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1

(1-cement : 1-sand) 10x10 mm groves, etc. complete.

26 Applying two coats of putty & one coats of primer of 3041.00 Sqmt 40.60

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

27 Wall painting (three coats) with plastic emulsion paint of 2038.00 Sqmt 125.53

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

28 Ceiling painting (three coats) with plastic emulsion paint of 1048.00 Sqmt 131.02

approved brand and manufacture on ceiling and soffits of

slab surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

29 Finishing wall with weather proof exterior emulsion paint 2911.00 Sqmt 185.84

(two coats) with Damp Proof Coating (one coat) on wall

surface to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

30 Providing and laying polished Blue Kota stone slab 43.00 Sqmt 1019.00

flooring over 20mm (Average) thick base of cement mortar

1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty

:1.5 - coarse sand) laid over and jointed with grey cement

slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm

31 Providing and laying polished Blue kota stone slab 25mm 2.00 Sqmt 1166.93

thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand)

and jointed with gray cement slury mixed with pigment to

match the shade of slab including rubbing and polishing

32 Providing and fixing pre-cast Rubber Dye / steel Dye inter 363.00 Sqmt 706.93

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the

joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

33 Providing and laying polished Granite stone slab flooring 7.00 Sqmt 2179.58

over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

34 Providing and fixing Machine cut & Polished Granite stone 7.00 Sqmt 2515.91

in 7.5 cm width Strip flooring for Ramp even grade over

20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete. (A)

35 P & L 80 x 80 cm Double Charged vitrified 8 mm thick tile 117.00 Sqmt 1454.40

flooring over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete for Light shade

36 P & L 60 x 60 cm Double Charged vitrified 8 mm thick tile 210.00 Sqmt 1324.11

flooring over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete for Light shade

37 P & L 60 x 60 cm Matt Finished vitrified 8 mm thick tile 210.00 Sqmt 1324.11

flooring over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete

38 Providing and laying Double Charged Vitrified tiles 8 to 10.00 Sqmt 1338.25

10 mm thick , 80 x 80 cm in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry

39 Providing and laying Double Charged Vitrified tiles 8 to 17.00 Sqmt 1207.96

10 mm thick , 60 x 60 cm in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry

40 Providing and laying Matt Finished Vitrified tiles 8 to 10 16.00 Sqmt 1207.96

mm thick , 60 x 60 cm in skrting risers of steps and dedo

on 10mm thick cement plaster 1:3 (1-cement : 3-coarse

sand) and jointed with white cement slurry

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

41 P & L 60 x 60 cm Antiskid Ceramic 10 mm thick tile 53.00 Sqmt 1378.65

flooring over 20 mm (average) base of cement mortar 1:6 (

1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing &

cleaning the surface etc. complete

42 Providing and laying 60 x 120 cm Glazed tiles 6mm thick 66.00 Sqmt 1224.12

in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry

43 Providing and laying 30 x 60 cm Glazed tiles 6mm thick in 216.00 Sqmt 1006.97

skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry

44 Providing and fixing Machine cut, Free edges, Mirror 39.00 Sqmt 2464.40

Polished Granite stone slab flooring 18mm thick laid on

20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) for Trade & Riser including Half

Round moulding front edge of trade jointed with grey

cement slurry mixed with pigment to match the shade of

slab including rubbing and polishing etc. complete.

45 Providing and fixing Machine cut, Free edges, Polished 389.00 Sqmt 2510.86

Green Granite stone slab flooring 18mm thick for vertical

wall/Doors/Windows Sill, Jams for cladding as per design

including full moulded round inside edge and laid on10mm

thick base of cement mortar 1:3 (1-cement : 3-coarse sand)

jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing

46 Providing and fixing Machine cut Bothside mirror polished 10.00 Sqmt 1778.61

Granite stone in single piece (Max 150 cm long and width

upto 45 cm with both side polished) for horizontal Shelves

including makng grooves & Fixing the same in Brick/

concrete wall finished with flush pointing, round open edge

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

47 Providing and laying water prooofing treatment with china 875.00 Sqmt 1132.21

mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding

maintaining slope for plain and curve surface & 12 mm to

20 mm broken pieces not more than 2.5 cm of ceramic/ of

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto

surface using white cement including rounding off

junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

48 Constructing Sandwich Platform of 18mm thick polished 4.00 Sqmt 2760.33

black or selected granite at top and 25 mm thick kota stone

with 75cm height with necessary support using 20mm thick

cement mortar 1:3 for sandwich and fitting at bottom &

edges with waterproof rigid adhesive including making

necessary grooves in walls with vertical support of double

kota stonr sandwich every 60cm centre to centre including

all labour material of approved quality including full

moulded round front edge fixed in wall for partition.

49 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles 280.00 Sqmt 1807.40

having Tegular edges & 15mm thick Densified edges on the Tile Periphery for

Extra Strength the Light weight calcium silicate ceiling tiles shall have, light

reflection 85% non-combustible as per B.S. 476 part IV, 100% humdity

resistance and also having thermal conductivity 0.043° w/m KC. for the best

thermal insulation. The Light weight calcium silicate tile shall be of approved

texture Fine fissured/Spintone/Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size 595 x 595 mm to be laid

on true horizontal level suspended inter locking metal grid of hot dipped

Galvanized Steel sections (Galvanized @120 grams per sqm including both

side) consisting of main 'T' runner suitably spaced at joints to get required

length and size of 24 x 38 mm made for 0.30 mm thick (minimum) sheet,

1200mm centre to centre, amd cross 'T' of size 24 x 28mm made of 0.33mm

(minimum) sheet spaced 1200mm along spaced between main 'T' at 600mm

centre to centre to form agrid of 1200 x 600 mm and secondary cross 'T' of

length 600mm and size 24 x 28mm made 0.30mm thick (minimum) sheet to be

interlocked at middle of the 1200 x 600mm panel to form grid of size 600 x

600mm resting on periphery wall/ partition on parameter wall angle pre-coated

steel of size (24 x 24 x 3000mm wide of 0.40mm thick (minimum) sheet with

help of rawl plugs at 450mm c/c with 25mm long dry wall screw @230 mm

interval and laying 15mm densified edges light weight calcium silicate ceiling

tiles of approved texture (Fine Fissured/Cosmos/Spintones) in the grid

including, cutting /making opening for services like diffusers, grills, light

fittings, fixtures, smoke detectors etc., wherever required, Main 'T' runners to

be suspended from ceilings using G.I. slotted cleats of size 25 x 35 x 1.6mm

fixed to ceiling with 12.5mm dia and 50mm long dash fastners, 4mm G.I.

adjustable rods with galvanized steel level clips of size 85 x 30 x 0.8mm,

spaced at 1200mm centre to centre long main 'T' bottom exposed with 24mm of

all T-sections shall be pre-painted with polyster baked paint, for all heights, as

per specifications, drawings and as directed by Engineer in-charges.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

50 Pro. And fixing single layer gypsum board 12 mm thick 250.00 Sqmt 743.16

sections using water proof board of size 1220 mm x

mm x 8.0 mm suspended by GI suspender channel of size

25 mm x 3 mm with intermediate channel og size 18 mm x

40 mm x 0.8 mm at 1220 mm center to center ceiling

section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c

and perimeter channel A of size 20 mm x 27 mm x 30 mm

x 0.5 mm at edges & drops incl.paper tap sand sofit cleat,

anchor fastener, scoch bolt connecting cleat,joining

compound top coat on ceiling incl.making necy.opening for

light fitting,diffuser etc. comp. as per detail drawing as

51 Pro. And fixing single layer water proof gypsum board 12.5 84.00 Sqmt 740.23

mm thick sections using water proof board of size

mm x 1830 mm x 8.0 mm suspended by GI suspender

channel of size 25 mm x 3 mm with intermediate channel

og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to

center ceiling section of size 40 mm x 35 mm x 0.55 mm at

457 mm c/c and perimeter channel A of size 20 mm x

mm x 30 mm x 0.5 mm at edges & drops incl.paper tap

sand sofit cleat, anchor fastener, scoch bolt connecting

cleat,joining compound top coat on ceiling incl.making

necy.opening for light fitting,diffuser etc. comp. as per

detail drawing as directed

52 Providing and fixing flush door with Single shutters, solid 61.00 Sqmt 4129.89

core construction with frame of first class hardwood with

cross board and finished with 1 mm thick laminate on both

side of shutter, machine glued PVC beading on periphery

including 30cm long Stainless Steel Pipe handle on both

side SS ASIS 304 grade, SS Stopper 20cm, SS Aldrop

30cm both side, anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board

core anodised alluminium butt hinges in flush door shutters

(2) 35 mm thick.

53 Providing and fixing flush door with Double shutters, solid 5.00 Sqmt 4093.53

core construction with frame of first class hardwood with

cross board and finished with 1 mm thick laminate on both

side of shutter, machine glued PVC beading on periphery,

including 30cm long Stainless Steel Pipe handle on both

side SS ASIS 304 grade, heavy duty Floor Spring each side,

SS Stopper 20cm, SS Aldrop 30cm both side, anodised

alluminium butt hinges with necessary screws. (B) Non-

decorative type and block board core anodised alluminium

butt hinges in flush door shutters (2) 35 mm thick.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

54 Providing and fixing Door having extruded aluminum 13.00 Sqmt 2283.61

Colour anodized section frame main outer size 127mm x

38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four

track member size 122.20mm x 31.75mm x 1.10mm@ wt

1.205 kg/m, vertical member of size 122.20mm x 31.75mm

x 1.50mm @1.398 kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm@ 0.456kg/mt

,vertical member of size 40mm x 18mm x 1.29mm @

0.456 kg/mt with 5 mm thick transparent bronze colour

tinted float glass with rubber gasket and airlock strip

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for Door. With Mosquito net shutter in

55 Providing and Fixing frameless toughened glass door with 18.00 Sqmt 3535.00

double shutters as per described dimensions, using 12mm

thick toughened glass of first class quality with machine

polished edges. The work includes providing and fixing of

heavy duty Floor Spring with SS 304 cover plate, Top

Patch, Bottom Patch, and Top Pivot. Includes SS 304 grade

"H" type pipe handles (600mm long) on both sides, Patch

Lock with computerised keys and Dust-Proof strike plate.

The assembly shall include all necessary clear PVC

weather seals on the periphery and be installed with non-

staining structural sealant to ensure a dust-proof finish. All

fittings to be SS 304 grade satin finish. The rate inclusive

of all transportation, loading, unloading and safe stacking

at the site and final professional cleaning of glass to

remove all smudges, stickers, and sealant residue, etc.

complete as directed by the Engineer in charge.

56 Providing and fixing Fixed Frameless Glass partitions as 3.00 Sqmt 3030.00

per described dimensions using 12mm thick toughened

glass of fixed of first-class quality with machine-polished

edges. The glass panels shall be securely anchored at the

floor, ceiling, and wall interfaces using SS 304 grade heavy

duty U-channels or architechtural clips. The work includes

providing and fixing all necessary SS 304 grade glass-to-

glass connectors and stabilizers to ensure structural rigidity

and perfect alignment. All peripheral joints and interfaces

are to be filled with non-staining structural-grade clear

silicone sealant to ensure a water-tight and dust-proof

finish. The rate inclusive of all transportation, loading,

unloading, safe stacking at the site and final cleaning of

glass to remove all smudges, stickers, and sealant residue,

etc. complete as directed by the Engineer in charge.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

57 Providing and fixing Frameless Bathroom Glass 9.00 Sqmt 5433.80

partitions/Shower enclosures as per described dimensions

using 12mm thick toughned glass of first-class quality with

machine-polished edges. The glass panels shall be securly

anchored at the floor and wall interfaces using SS

grade heavy duty architectural clips or brackets. The work

includes providing and fixing all necessary SS 304 grade

hinges, handles, stabilizers, and glass to glass connectors to

ensure structural rigidity and perfect alignment. All

peripheral joints and interfaces are to be filled with non-

staining structural-grade clear anti-fungal silicone sealant to

ensure a water-tight finish. The rate is inclusive of all

supply, transportation, loading, unloading and safe stacking

at the site, along with the final cleaning of glass to remove

all smudges, stickers, and sealant residue, etc. complete as

directed by the Engineer-in-charge.

58 Providing, supplying and fixing 20mm thick, Cement Fiber 100.00 Sqmt 6733.34

Board (CFB) Screen, precision-cut using CNC (Computer

Numerical Control) technology to the required architectural

pattern and design. The work shall be executed in a

professional manner to ensure a complete and finsihed

installation as per site requirements, The rate includes

supply, transportation, loading, unloading, material CNC

cutting, all necessary hardware, and all labor required for

the complete installation of the screen in its final position.

59 Providing and fixing window having extruded aluminum 44.00 Sqmt 1738.21

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x

1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with rubber gasket and

airlock strip powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame as per

details etc. With Mosquito net shutter in outer track.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

60 Providing and fixing window having extruded aluminum 6.00 Sqmt 1594.43

Colour anodized section frame main outer size 95mm x

24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three

track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x 18mm x

1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with rubber gasket and

airlock strip powder coated aluminum fittings and fixtures

and transparent silicon sealant glass fixing to frame as per

61 Providing and fixing Standard extruded colour anodized 47.00 Sqmt 1368.55

alluminium section frame weight 1.094 kg/Rmt.with

Adjectable Glass Louvers of 5 mm thick transparent glass

colour tinted float glass with transparent silicon gasket with

allu. Powder coated fittings & fixtures.

62 SIGNAGES ON DOOR :Providing and fixing 304 grade 14.00 Nos. 1262.50

stainless steel 1.5mm thick brushed steel finish plate fixed

on a door using S.S studs and with punched (laser cut)

lettering carried out on S.S plate of required size and text

as directed by engineer etc. complete. Size 30 cm x 15 cm

63 Providing erecting and fixing double coated ISI water tank 10000.00 Litre 3.95

of required capacity each with all necessary fittings and

connection etc. complete on terrace

64 Providing, laying and jointing in true line and level 110 409.00 Rmt 876.12

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

65 Providing, laying and jointing in true line and level 160 180.00 Rmt 834.39

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 160 mm diametre x

mm length x 196 mm heigh at every 2000 mm center to

center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

66 Providing laying and jointing in true line and level 50mm 250.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

67 Providing laying and jointing in true line and level 40mm 400.00 Rmt 148.12

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

68 Providing laying and jointing in true line and level 25mm 280.00 Rmt 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

69 Providing and fixing concealed center point to wall ceiling 45.00 Rmt 447.73

&floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [E] 40mm.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

70 Providing and fixing concealed center point to wall ceiling 45.00 Rmt 253.83

& floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [C] 25 mm.

71 Providing and fixing concealed center point to wall ceiling 45.00 Rmt 170.36

& floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete. [A] 15 mm.

72 Providing and fixing Gun metal check or non-return 10.00 Nos. 663.43

fullway wheel valve.(E) 40mm dia.

73 Providing and fixing Gun metal check or non-return 23.00 Nos. 420.64

fullway wheel valve.(C) 25mm dia.

74 Providing and fixing ball cock of approved. quality as 2.00 Nos. 189.84

directed.(A) Copper Metal (ii) 50mm dia.

75 Providing and fixing C.P. brass shower rose with 15mm or 9.00 Nos. 282.17

20mm inlet.(A) 100mm dia. Each

76 Providing and fixing wash down water closet (Wall Hung 10.00 Nos. 9212.52

type, W.C. Pan) with integral P or S trap, Health Fauset

Heavy Duty with hook and PVC dual flush tank with

complete fittings including jointing the trap with soil pipe

in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and

cover to be measured and paid for separately)(A) vitreous

China Pattern :(i) in white colour

77 Providing and fixing washbasin (ii) Flat Back washbasin 13.00 Nos. 2180.73

550 mm x v 400mm size. (i) In white colour including with

approved sanitary grade material with CP waste coupling,

waste pipe, 15mm dia Pillar & Stop Cock of approved

brand with connection 15mm dia flexiable pvc pipe etc.

78 Providing and fixing Kitchen sink with C.I. or M.S. 1.00 Nos. 2987.88

brackets, painted white including cutting holes in walls (C)

Vitreous China Sink.(i) 600mm x 450mm x 150mm size

including approved sanitary grade material with CP waste

coupling, waste pipe, 15mm dia Pillar & Stop Cock of

approved brand with connection 15mm dia flexiable pvc

pipe etc. complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

79 Providing and fixing pillar tap, capstan head, screw down 32.00 Nos. 308.73

high pressure with screws, shanks and back nuts. (i) 15mm

80 Providing and fixing PVC SWR Nahni trap IS 14735 for 25.00 Nos. 586.60

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making

good the walls.

81 Providing and fixing S.W. gully trap with C.I. grating brick 10.00 Nos. 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

82 Providing and fixing C.P. brass towel rail comlete with 19.00 Nos. 616.43

C.P. brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

83 Providing and fixing 600mm x 450mm bevelled edge 13.00 Nos. 859.41

mirror of superior glass mounted on 6mm thick A.C. sheet

or plywood sheet and fixing to wooden pluge with C.P.

brass screws and washers.

84 Providing and fixing in position PVC cowel went to pipes 10.00 Nos. 75.75

85 Constructing brick masonry chamber for underground C.I. 17.00 Nos. 3660.76

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover

with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand

:4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(ii) Inside dimensions

500mm x 700 mm and 450mm deep for pipe line with one

86 Providing and laying (to level or slopes) and jointing with 100.00 Rmt 531.18

stiff mixture of Cement Mortar in proportion 1:1 Salt

glazed stoneware pipes including testing of pipes and joints

complete and Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm

nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing

complete.(B) 150mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

87 Providing sock pit of 5.00 Cu.M. Volume including 4.00 Nos. 3445.19

excavating and filling brickbats with dry masonry work at

top for 45cm. height including covering the top with stone

including providing vatas in C.M. 1:3 with finishing curing

etc. complete as directed.

88 Applying general insecticide pest control treatment to 867.00 Sqmt 80.62

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -

II( (0.075% concentration by mass) is recommended

10.5ml chemical diluted with 5 liters of water application

0.5 litre chemical /Sqm of surface is recommended as per

89 Anti-Termite System:Providing and laying of permanent 6127.00 Sqmt 80.62

piping technology anti-termite treatment before flooring

work by installing LLDP (Low linear density polyethylene)

tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt pressure

compensation chip every 30 cm interval in the tube, having

working pressure of 2 Kg/cm2 and release rate of

ltr/hour fixed by P-clips and nails. The LLDP pipe shall be

installed at the entire periphery of the building and at

internal network of building at a depth of 20 to 200 mm

under floor at every 2 to 3 mtr. c/c distance (adjusted as per

building layout ) & Ends of loop pass through a PVC elbow

of minimum 32 mm ID at junction box of wall and floor

level,entering into a steel reinforced grooved flexible pipe

of minimum 22 mm ID leading into junction box and the

loops shall terminate in junction boxes & test every

junction during injecting chemicals for termite control

treatment. The anti termite chemical Imidacloprid 30.5%

SC mix as per IS-6313 (part III) shall be injected by the

pressure pump diluted with water @ 10.5 ml/5 ltr of water

at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor

shall submit approved line plan for piping system and

junction boxes dully approved by Engineer-in-Charge with

bond of 5 year warranty.(i)Anti Termite chemical injected

area (Chemical injecting incl. labour cost)

90 Providing and fixing Safety Grills of required pattern for 4957.00 Kg 110.60

windows/door using MS polished bars, Rectangular CRS

Pipes of size 50mm x 30mm x 2mm or Required at

required spacing as per design and hold fast with coach

bolts including one coat of and two coats of matt finished

oil painting etc. complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

91 Providing and fixing a set of wall mounted 38mm dia. U 2.00 Nos. 2323.00

shaped horizontal stainless steel collapsible grab bar,

38mm vertical stainless steel fixed grab rail of grade SS

304 from round pipe supported and 75mm dia 8mm thick

SS 304 base flange on wall including anchor fastners, nuts,

accessories as per detailed drawing etc. complete as

directed by architect or engineer in charge.

92 Providing and fixing 90 cm high Stainless Steel railing 25.00 Rmt 3429.16

made from anticorrosive 304 grade S.S. pipe of 50 mm dia.

(16 gauge) as hand rail with S.S.304 grade baluster of

mm dia (16 gauge) as a vertical support fixed in RCC Slab/

steps of stair at 1.2 mt. c/c including three horizontal S.S.

pipes of 16 mm dia (16 gauge) at equal distance fixed by

mm dia (16 gauge) S.S. pipe with baluster including

accessories as per detailed drawing as directwed etc.

93 Providing & Fixing in position 300 to 150mm high 28.00 Nos. 757.50

English/Gujarati letters made from 1.0mm thick stainless

steel sheet as directed by the Engineer in charge with all

material, hardware, accessories and fittings etc. complete.

94 Steel work, welded in built up sections framed work 40.50 Quintal 9108.49

including cutting, hoisting, fixing in position and applying

a priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

95 Painting two coats (excluding priming coat) on external 124.00 Sqmt 22.75

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black,

anticorrosive to give an even shade including cleaning of

all dirt, dust and other foreign matter. (B) 75mm dia.

96 Brick work using common burnt clay building bricks 68.00 Cum 4214.33

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -

fine sand) (Conventional)

97 Providing and laying controlled cement concrete M.150 18.00 Cum 7426.53

and curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work for Coping

98 Providing & laying weep hole in Aburtments, and returns 669.00 Each 86.73

by using A.C. pipe of 100mm including laying in proper

grede and jointing the completed as per detailed

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

99 Provding and applying Exterior grade Exposed concrete 1785.00 Sqmt 543.38

texture finish (concrete design wall texture) of approved

make and shade over prepared surface, including surface

cleaning, primer application, base coat, texture coat

application to achieve exposed texture concrete panel

appearance with groove/joint pattern as shown in drawing,

curing, scaffolding, labour, materials, tools and all

incidental charges complete as directed by the Engineer-in-

100 Drilling of pilot bore hole of size 250/300 mm diameter at 230.00 Rmt 680.74

above site by mud finish direct rotary rig etc. complete

101 Reaming of 250/300 mm diameter pilot bore hole to size 200.00 Rmt 316.13

450 mm diameter including assembling, lowering housing,

casing strainer pipes with gravel packing and clay ball

packing etc. complete.

102 Providing 600 CFM / 150 PSI capacity air compressor upto 1.00 Job 25118.70

available of sand free discharge ( Minimum 6.0 Hours)

103 Supply of reducer made frim 6 mm thick plate (M.S.) for 1.00 Nos. 2009.90

ERW pipe of size (ii) 200 mm dia. x 250 mm dia. X

104 Supply of 200 mm diameter V-wire screen pipe of slot size 85.00 Rmt 1401.88

1.0 mm nominal hole etc. complete.

105 Supply of M.S. Bore clamps with 3 holes on either side 1.00 Pair 1753.36

with nuts and bolts of standard make and suitable size (g)

750 mm x 75 mm x 16 mm flat to 200 mm dia. Pipe.

106 Supply of Bore Plug having 100 mm height made from 1.00 Nos. 834.26

M.S. plate with 3 holes at equal distance on circumference

for nuts-bolts type, locking arrangement with nut-bolts &

lock nuts of standard make complete. (b) from 5 mm thick

M.S. plate (for top also) (ii) suitable for 200 mm dia. pipe.

107 Supply of M.S. Bail Plug having length of 0.45 mtr from 1.00 Nos. 907.99

medium class pipe as per I.S.S. suitable for (b) 200 mm

diameter pipe etc. complete.

108 Supply of Steel Bent plates suitable to ERW pipe for (b) 8.00 Nos. 71.71

200 mm diameter and 150 x 150 x 6 mm size etc.

109 Supply of Gravel of size selected size up to 4mm to 6 mm, 12.00 Cmt 2295.73

including stacking and filing etc. complete.

110 Charges for uptron make Electrologger (with carting ) of 1.00 Job 12120.00

pilot bore hole etc. complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

111 Charges for Geo Hydrological ground water investigation 5.00 Job 16160.00

including water sample chemical analysis etc. complete.

112 S.I.T.C. submersible pump set suitable for bore of 150 mm 1.00 Each 49148.62

dia or more having 3 phase motor capacity not less than

HP with following capacity. Lifting and Lowering taken

extra. [C] 25 stage 160 to 100 LPM discharge at 185 to

mtr head for 50 mm dia delivery pipe

113 Providing and erecting PVC corrugated Flexible conduit 175.00 Rmt 26.26

with required numbers of coupling, PVC bushes, Check-

nuts etc. complete of following sizes. (3) 32 mm diameter

114 Lowering of submersible motor pump set complete with 1.00 Job 2568.43

required. Nos. and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after checking

of threads of each pipe with coupling to take the load of the

pump set and pipe assembly filled up with water. (B)

Above 60 mtr and up to 120 mtr

115 Supplying and erecting approved make motor control 1.00 Each 8710.24

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of

suitable size of ON-OFF isolator (AC - 3/23 duty) main

fuses, single phasing preventer, indicating lamps for R-Y-B

phases, overload relay, automatic water level controller,

Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor &

overload relay, start-stop push buttons, to be erected on

angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L&T, Seimens or

BCH make only (a) DOL upto 7.50 H.P.

116 Supplying and erecting XLPE (IS:7098) (I)-88 ISI 200.00 Rmt 136.35

unarmoured copper cable 1.1 KV grade to be erected as

directed of following size. (E) 3 core 2.5 Sq. mm

117 Providing and fixing butterfly valve of IS approved brand 2.00 Nos. 1595.80

118 Providing and laying coloured glazed tiles of the size 300 67.00 Sqmt 1487.89

mm x 450 mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse

sand) & jointed with white cement slurry.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

119 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. 3.00 Nos 958.17

size having weight not less than 35Kg.

120 Clearing and grubbing road land including uprooting rank 1.00 Hectare 34889.38

vegetation grass bushes,shrubs,sapling and trees girth up to

300 mm removal of stumps of trees cut earlier and disposal

of unserviceable materials(D) By mechanical means in area

of thorny jungle

121 Earthwork in cuting in all sorts of soil and soft murrum 411.00 Cum 134.20

including conveying and spreading the stuff, embankment

as and where directed within 200meters from the end of the

cutting with all required lead and lift.

122 Earthwork in cutting including preparing the slope and 1233.00 Cum 260.57

camber and stacking or utilising the cutting stuff in bank as

directed upto 200 Meters from the end of cutting with all

lead and lift.(i) Hard murrum.

123 Earthwork for embankment including breaking clods, 17671.61 Cum 131.93

dressing with all lead and lift (including watering and

consolidation)(A) From Borrow pits within land width

124 Rolling and consolidation of soling including filling in 8029.90 Sqmt. 22.75

depression which occur during the process, with power

roler 8 tonne to 12 tonne..

125 Box cutting the road surface to proper slope and camber for 321.00 Cum 109.05

making a base for road work including removing the

excavated stuff and depositing on the road side slope as

directed upto 50Mt.lead.

126 Construction of B.I.T.C. granular sub base by providing 157.00 Cum 1248.49

granular material of Grading II, spreading in uniform layers

with motor grader on prepared surface , mixing by mix in

place method with front end loader at OMC , and

compacting with vibratory roller to achieve the desired

density ,complete as per Clause

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

127 Providing, laying, spreading and compacting stone 114.00 Cum 1519.13

aggregates of specific sizes to water bound macadam

(Grade-II) (B.T. Metal of size 45 to 63 mm) specification

including spreading in uniform thickness, hand packing,

rolling with 3 wheeled steel/ vibratory roller in stages to

proper grade and camber, applying and brooming requisite

type of screening/ binding Materials to fill up the interstices

of coarse aggregate, watering and compacting to the

required density.

128 Compaction and finishing of cement concrete road by 573.00 Sqmt. 72.72

trimix process providing extra labour charges for the trimix

vaccum dewatering service process on cement concrete

road surface by using vaccum dewatering pump floater

surface vibrator including making rough finish to surface as

per in including levelling the complete.

129 Supplying and fixing reinforced concrete heavy duty non- 40.00 Rmt. 660.00

pressure pipes with collars for culverts carrying heavy

traffic as per IS 458-1991 specifications including setting

the pipes in C.M. 1:2 watering and laying (to level or

slopes) of class NP3 of following internal daimeters.(i)

130 Construction of Cattle trap made from ISMC 100 border 6.00 Sqmt. 6146.86

and G.I. pipe 50 mm dia. Heavy duty at 12cm spacing by

welding and for supports 2 nos. I.S.M.C. 100x75x6 section

fixing in prepared chamber as per drawing.

131 Constructing Brick masonry road gully chamber 500mm x 16.00 Nos. 2017.20

450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

132 Providing and fixing pre-cast concrete kerb stone of gray 300.00 Rmt 404.06

cement based concrete block 30cm length,30cm height and

15cm thick of M200 grade concret as per approved design

and including excavation for fixing in proper line and

Level,filling the joint with C:M 1:3 (1cement:3fine sand)

133 Supplying of yellow or Goradu soil with all lead and lift 952.00 Cum 505.00

including spreading watering dressing and rolling with

hand roller etc complete selected soil

134 Supplying of well rotted FYM manure with all lead and lift 48.00 Cum 378.75

including spreading mixing dressing and rolling with hand

roller etc. complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

135 Scarifying the surface of soil including spreading of DAP 1903.00 Sqmt. 26.26

fertilizer mixing with soil properly leveling ground

dressing of the plot

136 Supplying and planting Dibbling semi carpet lawn at 1903.00 Sqmt. 90.90

distance of about 15 cm x 15 cm after proper anti termite

treatment and rolling the same by hand roller and watering

137 Bowling and developing flowering plants grown in nursery 40.00 Nos. 505.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Arrica Palm

138 Bowling and developing flowering plants grown in nursery 50.00 Nos. 656.50

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Triangle Palm

139 Bowling and developing flowering plants grown in nursery 60.00 Nos. 80.80

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Jasud

140 Bowling and developing flowering plants grown in nursery 30.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Croton

141 Bowling and developing flowering plants grown in nursery 40.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

142 Bowling and developing flowering plants grown in nursery 30.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra

143 Bowling and developing flowering plants grown in nursery 25.00 Nos. 40.40

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Croton Petra Live Plant

144 Bowling and developing flowering plants grown in nursery 20.00 Nos. 101.00

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Golden Durenta Varigated

145 Bowling and developing flowering plants grown in nursery 50.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Crotons Variety

146 Bowling and developing flowering plants grown in nursery 80.00 Nos. 35.35

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahindi

147 Bowling and developing flowering plants grown in nursery 50.00 Nos. 85.85

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Varigated Ficus

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

148 Bowling and developing flowering plants grown in nursery 60.00 Nos. 70.70

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted New Black Ficus

149 Bowling and developing flowering plants grown in nursery 45.00 Nos. 45.45

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted White Ribbon Plants

150 Bowling and developing flowering plants grown in nursery 100.00 Nos. 60.60

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Green Mahendi border

151 Bowling and developing flowering plants grown in nursery 40.00 Nos. 95.95

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Pendulla Asopalav

152 Bowling and developing flowering plants grown in nursery 80.00 Nos. 121.20

having approximate height 4 to 5 t or Height as per

Landscape Plan with natural growth and natural colour

planted in a lump of soil packed in polyethylene bag or

earthen pot including organic & chemical fertilizer

pesticides, fungicides, hormones & maintaining the plants

up to three months as Deserted Potted Plants

153 Labour charges for planting various plantsafler proper anti- 800.00 Nos. 70.70

termite treatment in pits including placing properly and

filling the pits with required prepared mix soil and watering

and dispporting etc. complete

154 Maintance of the garden for 60 days after Complition of 3 1.00 Job 25250.00

month stipulated period is completed for plantation of lawn

and plants including applying second round of proper anti-

termite treatment

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

155 Providing laying and jointing in true line and level 15mm 100.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

156 Providing and fixing brass screw down stop cock (A) 15 5.00 Nos. 205.83

157 Rubber Hose Pipe 15 mm dia of approved brand and make 200.00 Rmt 90.90

158 Providing and fixing G.I. Nipple as directed 10.00 Nos. 101.00

159 Providing & Laying Rain Water Junction Chamber of Clear 15.00 Nos. 6241.80

Internal Size 0.60 x 0.60 x 0.75m with excavation of size

1.36 x 1.36m & 0.15m thick M200 Bed Concrete Including

brick masonary 0.23 thick wall in C.M. 1:6 of 0.75m height

with 15mm thick Cement Plaster inside & outside (1:4),

1.06 x 1.06 RCC M200 top slab of thickness 0.15m with

TMT steel and 455mm x 610mm cast iron manhole cover

with frame weight not less than 35 kg as per directed by

Engineer-in-charge.

160 Providing & Laying Filter chamber of brickwork 0.23 thick 15.00 Nos. 22067.49

in C.M. 1:6 of clear internal size 2.04m x 1.20m x 1.20m

and excavation dimension of 2.80m x 1.96m x 1.35m

including C.C. M200 Bed Concrete 0.15m thick and RCC

M200 Top slab of thickness 0.15m with TMT steel,

Including 15mm (1:4) thick cement plaster inside & outside

with Cement slurry & top cover with frame of minimum

weight of 35kg, including filling filter material of 200mm

thick each layer of 25-40mm, 10-20mm of BT metal and

sand as per directed by engineer-in-charge

161 Providing & Laying Water Harvesting Pit of clear size 2.00 1.00 Nos. 32558.36

mt x 2.00 mt x 4.00 mt. For water logging with excavation

in any strata upto four meter depth, Brick work 0.23 thick

in C.M. 1:6 of clear internal size 2.00m x 2.00m x 1.20m

with 15mm thick C.M. 1:4 plaster, filling the pit with B.T.

metal 40mm in 0.60 mt. depth with 25-40mm kaptchi,

mt. depth and 2mt. depth with coarse sand in layers

including makng P.V.C. line for water inlet etc. as directed

with 250mm dia bore 15mt. depth amd 150mm dia PVC

pipe of 10 Kg.f/cm2 casing wih gravel packing or as

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

162 II) Fire Extinguisher and Exit Signages Supply, 15.00 Nos. 6447.84

installlation, testing and commissioning of Carbon Dioxide

(CO2) type Fire Extinguisher of 4.5 kg confirm to

IS:15683, with ISI marked / TAC approved fitted with

required accessories including wall suspension brakets.

163 Supply, Installation, Testing & Commisioning of ABC type 15.00 Nos. 2222.00

6kg confirm IS:15683, with ISI marked / TAC approved

fitted with required accessories including wall suspension

164 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 9.00 Sqmt 1311.19

mm (average) base of cement mortar 1:6 ( 1 cement:

coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc.

complete for light shade

165 Providing and laying Ceramic tiles 6mm thick in skrting 1.00 Sqmt 1090.32

risers of steps and dedo on 10mm thick cement plaster 1:3

(1-cement : 3-coarse sand) and jointed with white cement

166 Providing and fixing window having extruded aluminum 6.00 Sqmt 1713.70

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size

0.457 Kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc complete for window.

167 Excavation for foundation upto 1.5 m depth including 53.00 Cum 212.53

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil (Excavated by Manual Labour)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

168 Excavation for foundation for depth from 1.5 m to 3.0 m 18.00 Cum 235.05

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil (Excavated by Manual

169 (i) Half brick masonry in common brunt clay building 13.00 Sqmt. 629.84

bricks having crushing strength not less than 35 Kg/Sq.Cm.

in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in

foundation and plinth (B) Conventional

170 Providing and laying (to level or slopes) and jointing with 10.00 Rmt 317.48

stiff mixture of Cement Mortar in proportion 1:1 Salt

glazed stoneware pipes including testing of pipes and joints

complete.(B) 150mm dia.

171 Providing and Constructing sock pit of 4.46 mt. dia outside 1.00 Nos 130531.39

and 8 mt depth with honey combed masonary 7.50 mt. from

bottom and 0.60 mt. brick masonary in C.M. 1:6 top with

RCC slab cover of M200 vent pipe 5mt. Long 75mm dia &

C.I. cover and cowel vent etc. comp

172 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- 2.00 Nos 23470.49

cement :2-coarse sand : 4-graded stone aggregate 20mm

nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse

sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement

:2-Coarse sand :4-stone aggregate 20mm nominal size)

finished smooth complete including curing and festing (i)

Inside size 900mm x 1200mm and 1.5M. deep including

C.I. cover with frame size 560mm diameter total weight of

cover and frame to be not less than 128 kgs. (Wt. of cover

64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick

walls of brick msonry using brick having crushing

strength not less than 35Kg. / sq.cm. in Cement Mortar

1:5 (1- Cement: 5-Coarse sand) (3) C type depth

Metre for 150mm diameter sewer.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

173 Providing corrugated G.I. sheet of class-3 roofing fixed 149.00 Sqmt. 734.19

with glavanished iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick

174 Point wiring for Light / Bell with 2-1.5 sq.mm & earth 198.00 Pts 582.77

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete.Cat-

III (Make:- Anchor, Indoasian, L&T / LK, Great-white )

175 Point wiring for Tissino / Modular secondary light point 87.00 Pts 200.99

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires, in below type of pipe to be erected

complete with earth continuity and necessary connection

with primary light with accessories erected on Metal /

PVC / wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open / concealed

wiring. with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.Note:- Maximum up to 6 mtrs

length, excess will be considered as Mains for Secondary

Point. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

176 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 54.00 Pts 809.01

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed..(f) with medium class

Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete.Cat-III (Make:- Anchor, Indoasian,

L&T / LK, Great-white )

177 Point wiring for Individual Plug with & earth wire of 1.5 64.00 Pts 612.06

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

completeCat-III (Make:- Anchor, Indoasian, L&T / LK,

178 Point wiring for on board Looped Plug with 6A Modular 97.00 Pts 309.06

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories.Cat-

III (Make:- Anchor, Indoasian, L&T / LK, Great-white )

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

179 Point wiring for Two Way Controlled Light Point with 2- 26.00 Pts 725.18

1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of

.ISI marked 1.1 kV grade FRLS PVC insulated multi strand

copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose

or H.D.Connector as directed.(f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete. Cat-III (Make:- Anchor, Indoasian, L&T / LK,

180 Providing following type of Modular Type Accessories 17.00 Nos. 160.59

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white

front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (3) Two

Pin/RJ-11 Telephone Socket[A] For One Gang Cat.III

(Make:- Anchor, Indoasian, L&T / LK, Great-white )

181 Providing following type of Modular Type Accessories 17.00 Nos. 160.59

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white

front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (4) TV Co-

axial Socket outlet Cat-III (Make:- Anchor, Indoasian,

L&T / LK, Great-white )

182 Providing following type of Modular Type Accessories 107.00 Nos. 25.25

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white

front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (7) Blank

Plate Single Cat.III (Make:- Anchor, Indoasian, L&T

/ LK, Great-white )

183 Providing following type of Modular Type Accessories 11.00 Nos. 160.59

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white

front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (8)

Computer RJ-45 socket Cat-III (Make:- Anchor,

Indoasian, L&T / LK, Great-white )

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

184 Providing following type of Modular Type Accessories 35.00 Nos. 180.79

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white

front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (9)

Amp. SP one way switch Cat-III (Make:- Anchor,

Indoasian, L&T / LK, Great-white )

185 Providing following type of Modular Type Accessories 35.00 Nos. 199.98

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white

front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (10)

6/16Amp. Universal socket Cat-III (Make:- Anchor,

Indoasian, L&T / LK, Great-white )

186 Providing and erecting ISI mark Medium class RIGID PVC 1315.00 Mtrs. 33.33

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed (b)

187 Providing and erecting ISI mark Medium class RIGID PVC 35.00 Mtrs. 54.54

PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed (c)

188 Providing & erecting PVC Corrugated Flexible Conduit 30.00 Mtrs. 21.21

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes. (2) 25 mm

189 Providing & erecting PVC Corrugated Flexible Conduit 20.00 Mtrs. 27.27

with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes. (3) 32 mm

190 Supplying and laying UPVC cable trunking system 53.00 Mtrs. 428.24

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

necessary end caps Internal and external bend, flat bends,

coupler, tee etc..All necessary accessories and measuring of

following sizes (2) 100 mm x 50 mm trunking

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

191 Providing and erecting Mains with 1.1 KV grade FRLS 4071.00 Mtrs. 104.03

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour for

earth continuity of following size (A) with medium class

Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

(Make:- Finolex, KEI, RR, Avocab)

192 Providing and erecting Mains with 1.1 KV grade FRLS 1004.00 Mtrs. 140.39

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm (Make:- Finolex, KEI, RR,

193 Providing and erecting Mains with 1.1 KV grade FRLS 252.00 Mtrs. 532.27

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm (Make:- Finolex, KEI, RR,

Avocab) (I) 4 wire 10 sq. mm (Make:- Finolex, KEI, RR,

194 providing and erecting Mains with ISI marked, 1.5KV 50.00 Mtrs. 115.14

grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC -

227 erected in existing pipe of following size (Specifically

for control panel, relays, power switchgears, motor starters

& control wiring) with required size of copper lugs, nuts

and bolts if required. (f) One wire 10.00 sq. mm

195 providing and erecting Mains with ISI marked, 1.5KV 64.00 Mtrs. 295.93

grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC -

227 erected in existing pipe of following size (Specifically

for control panel, relays, power switchgears, motor starters

& control wiring) with required size of copper lugs, nuts

and bolts if required. (h) One wire 25.00 sq. mm

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

196 providing and erecting Mains with ISI marked, 1.5KV 16.00 Mtrs. 376.73

grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS 694, IEC -

227 erected in existing pipe of following size (Specifically

for control panel, relays, power switchgears, motor starters

& control wiring) with required size of copper lugs, nuts

and bolts if required. (i) One wire 35.00 sq. mm

197 Supplying and erecting Flexible PVC insulated multi strand 414.00 Mtrs. 58.58

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. e) 1.50 Sq.mm

core round PVC sheathed

198 Providing & Erecting approved make following size of TV 365.00 Mtrs. 62.62

Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary

conductor made of poly - Aluminium film bonded Al.

Braids @ suitable coverage overall sheathed with black

PVC insulation. e).RG-11

199 Supplying & erecting approved make Telephone Cable 425.00 Mtrs. 20.20

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a) Unarmoured

200 Supplying & erecting approved make Telephone Cable 50.00 Mtrs. 125.24

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary

connections [A] Conductor Size 0.5 mm (b) Armoured

[Jelly Filled] (1) Ten Pairs

201 Supplying & erecting approved make LAN cable of 512.00 Mtrs. 47.47

following size in existing pipe as per direction [C] CAT -

202 Providing & erecting main Distribution (MDF) indoor type, 1.00 Nos. 994.85

back mounted frame as per DoT standard approved with

krone strips (a) Suitable for 10 pair

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

203 Supplying & erecting M.S. Box having 16 Gauge painted 6.00 Nos. 88.88

with red oxide or Heavy duty PVC box erected flushed on

wall or concealed in wall with necessary plastering &

finishing as directed of following size. (c) 200 mm x

204 Providing & erecting Switch board for Computer or 16.00 Nos. 1133.22

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open

box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with

necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories.Cat-

III (Make:- Anchor, Indoasian, L&T / LK, Great-white )

205 Decorative call bell Ting-tong box type 250 volts complete 17.00 Nos. 71.71

206 Supplying and erecting LED indoor fittings with LEDs of 23.00 Nos. 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Tube

Light with integral/ non-integral driver . (iv) 22-24 Watts,

Surge - 2KV,IP-20, conventional 4 feet Cat III (Make:-

Wipro,Havells, Philiphs,LT, Jaquar )

207 Supplying and erecting led lamps with following wattage 13.00 Nos. 112.11

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC

diffuser suitable LAMP holder (i) 5 to 8 watts Cat-III

(Make:- Wipro,Havells, Philiphs,LT, Jaquar )

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

208 Supplying and erecting LED indoor fittings with LEDs of 158.00 Nos. 589.84

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Square/

Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV Cat-III (Make:-

Wipro,Havells, Philiphs,LT, Jaquar )

209 Supplying and erecting LED indoor fittings with LEDs of 560.00 Mtrs. 220.18

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (D) LED

Strip Light (ii) Minimum 7.2W -240 LED per meter,(2

wire, IP-65) with non integral suitable Driver complete Cat-

lll (Make:- Wipro,Havells, Philiphs,LT, Jaquar )

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

210 Supplying and erecting LED indoor fittings with LEDs of 30.00 Nos. 813.05

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (F) Spot Light

425 Lumens, Surge-2kV (i) 3 to 7 Watts Cat-III (Make:-

Wipro,Havells, Philiphs,LT, Jaquar )

211 Supplying and erecting LED indoor fittings with LEDs of 9.00 Nos. 573.68

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (G) Step

Light having Aluminium die cast and ABS Plastic

material. (i) 5 watts, Direct/Indirect luminaire Cat-lll

(Make:- Wipro,Havells, Philiphs,LT, Jaquar )

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

212 Supplying and erecting LED indoor fittings with LEDs of 8.00 Nos. 312.09

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (H) Mirror

Light 9 Watts, wall mounted minimum 1 feet long (Make:-

Wipro,Havells, Philiphs,LT, Jaquar )

213 Supplying and erecting LED indoor fittings with LEDs of 13.00 Nos. 966.57

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (I) Adjustable

spot light with COB led having aluminium reflector of

following wattage (ii) 12 Watts Cat-lll (Make:-

Wipro,Havells, Philiphs,LT, Jaquar )

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

214 Supplying and erecting LED street light / Flood light 15.00 Nos. 2843.15

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Street Light (IP-

65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (i) 36 -

47 watts Cat-III (Make:- Wipro,Havells, Philiphs,LT,

215 Supplying and erecting LED street light / Flood light 10.00 Nos. 5175.24

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (B) Flood Light (IP-

65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (III) 60 -

89 watts Cat-III (Make:- Wipro,Havells, Philiphs,LT,

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

216 Supplying and erecting LED street light / Flood light 4.00 Nos. 4096.56

fittings with High power White LEDs wattage of 3 Watt

and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (C) Post Top Lantern

LED fitting comprises of finish cast aluminum spigot and

spun aluminum canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and accessories

wired upto terminal block.IP 65 (ii)32-40W Cat-III (Make:-

Wipro,Havells, Philiphs,LT, Jaquar )

217 (b) LED Bollard fittings of minimum height 600 mm & 16.00 Nos. 2687.61

dia.100mm having polycarbonate clear/milky diffuser

mounted on 3mm thick aluminium finished powder coated

pipe with base plate 160x160mm with erection by

M8x75mm fastner with required RCC foundation.IP65 for

9 to 20 watt ,surge-4kV- cat-III (Make:- Wipro,Havells,

Philiphs,LT, Jaquar )

218 Providing and erecting Approved make Four pole moulded 16.00 Nos. 6790.23

case circuit breaker having breaking capacity ICU of

KA. at 415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

(Make:- Indoasian, L&T (LK), ABB, Schneider)

219 Providing and erecting Approved make Four pole moulded 2.00 Nos. 8861.74

case circuit breaker having breaking capacity ICU of

KA. at 415 V. having normal current rating 125A. with

Fixed thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

220 Providing and erecting Approved make Four pole moulded 2.00 Nos. 17843.67

case circuit breaker having breaking capacity ICU of

KA. at 415 V. having Normal current rating 200A.with

variable Thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing

G.M.S.housing ICS=100% of ICU only Cat III

(Make:- Indoasian, L&T (LK), ABB, Schneider)

221 Providing and erecting Approved make Four pole moulded 1.00 Nos. 23041.13

case circuit breaker having breaking capacity ICU of

KA. and above at 415 V . having normal current rating

250A. with variable thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

(Make:- Indoasian, L&T (LK), ABB, Schneider)

222 Supplying & erecting approved make Four Pole 415V 1.00 Nos. 13353.21

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS for

(E)250A / 320A Cat-lll (Make:- Indoasian, L&T (LK),

ABB, Schneider)

223 Providing and erecting Approved make Earth fault Relay 1.00 Nos. 5956.98

suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT

ratio & MCCB rating as following along with shunt trip

220V AC. with all internal connections & complete erected

in existing M.S.housing. (3) 250 A -400 A , CT Ratio

224 Supplying and erecting triple pole & neutral 440V / 500V 4.00 Rn.Mtrs 1961.42

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

225 Supplying and erecting triple pole & neutral 440V / 500V 3.00 Rn.Mtrs 3202.71

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (B) Suitable for 200 Amp. capacity

226 providing and erecting Miniature circuit breaker single pole 29.00 Nos. 297.95

0.5A to 2A system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS 8828/1996 with

ISI Mark Cat.III (Make:- Indoasian, L&T (LK), ABB,

227 Providing and erecting Miniature circuit breaker single 116.00 Nos. 123.22

pole 6A to 25A suitable to operate on 240 V A.C. system

and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark

Cat-III (Make:- Indoasian, L&T (LK), ABB, Schneider)

228 Providing & erecting 240 V MCB double pole switch for 13.00 Nos. 325.22

lighting Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity (B) 40 Amp. Cat-III (Make:- Indoasian, L&T

(LK), ABB, Schneider)

229 Providing & erecting 415 V MCB Four Pole for Motor & 12.00 Nos. 811.03

Inductive Load (C Curve) having 10KA breaking capacity

& confirms to IS :8828 in existing box having following

capacity (B.) for 63 Amp. Cat-III (Make:- Indoasian,

L&T (LK), ABB, Schneider)

230 Providing and erecting Sheet Steel powder coated MCB 1.00 Nos. 1492.78

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43) (iv)12 way (Make:-

Indoasian, L&T (LK), ABB, Schneider)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

231 Providing and erecting Sheet Steel powder coated MCB 6.00 Nos. 3412.79

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for (B) three

phase incoming and single phase horizontal type outgoing

Per phase isolation type (PPI) (b) sheet steel double door

(iii)8 way (Make:- Indoasian, L&T (LK), ABB, Schneider)

232 Providing and erecting Approved make RCCBs 19.00 Nos. 2456.32

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for

following Max. rating erected as directed (iI) 40 Amps.DP

Cat. III (Make:- Indoasian, L&T (LK), ABB, Schneider)

233 Providing and erecting metallic vitrified danger notice 3.00 Nos. 69.69

board as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-

234 Providing and erecting Annealed bare Copper wire 8 to 16 14.00 Kgs. 794.87

235 Providing and erecting Pipe type earthing having 150 15.00 Nos. 368.65

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

236 For using salt and charcoal / coke as required for pipe type 15.00 Nos. 171.70

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

237 Supplying & erecting earth pit of minimum bore 8.00 Nos. 4591.46

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

238 Providing & erecting weather proof, dust & vermin proof, 5.00 Sq.Mtrs. 14902.55

floor mounted front operated indoor type cubical panel board

necessary IP-42 and above protection as per approval from

engineer incharge made from 14 SWG thick CRC M.S. sheet

for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size

of inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be

supplied with following approved manufacturers with

following size.(B) The standard companies switch gear shall

be used and only manufacturers at CPRI approved factory (i)

with 350mm depth

239 Providing , erecting , fabricating the M.S. structure as per 110.00 Kgs. 77.77

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections

complete with cutting, welding, grinding & finishing duly

painted with one coat of red oxide with erection on site as

per direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

240 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 250.00 Mtrs. 112.11

cable Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of

following size of cables. (B) 2 core 6 Sq. mm (Make:-

Finolex, KEI, RR, Avocab)

241 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 120.00 Mtrs. 264.62

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (B) 3 1/2 core 35 Sq. mm

( 16 Sq. mm 1/2 core) (Make:- Finolex, KEI, RR,

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

242 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 300.00 Mtrs. 341.38

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (C) 3 1/2 core 50 Sq.

mm ( 25 Sq.1/2 mm core) (Make:- Finolex, KEI, RR,

243 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 230.00 Mtrs. 648.42

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (F) 3 1/2 core 120 Sq. mm

( 70 Sq. mm 1/2 core) (Make:- Finolex, KEI, RR,

244 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 630.00 Mtrs. 151.50

cable multistrand / Solid Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables (B) 4 core 6 Sq.

mm (Make:- Finolex, KEI, RR, Avocab)

245 Making trench in soft soil of suitable width of 90 cm deep 570.00 Mtrs. 55.55

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

246 Making trench in Hard Murrum / Tar Road of suitable 322.00 Mtrs. 74.74

width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground.

247 Making trench in Hard Murrum / Tar Road of suitable 114.00 Mtrs. 357.54

width of 90 cm or required depth for laying any size of

cable or locating the fault all over the run and back filling

the same and making the surface as normal ground. (B) If

additional machinery like hammer driller or JCB use [Add]

248 Providing & laying. R.C.C. Hume pipe for cable to be laid 92.00 Mtrs. 263.61

90 cm. below ground across the road crossing or on floor

with necessary material in an approved manner and making

the ground as per original. (E)150 mm dia

249 Providing & laying approved make Double walled 1070.00 Mtrs. 62.62

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (A)

50 mm Outer Dia

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

250 Providing & laying approved make Double walled 110.00 Mtrs. 137.36

corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable (D)

120 mm Outer Dia

251 Providing & laying approved make ISI marked Rigid 30.00 Mtrs. 236.34

PVC pipe having 6Kg / cm2 (Class-3) to be erected at road

crossing on or floor as directed for laying of cable. The

pipes as following size of dia & weight per 6 mtr. (F)

mm inner Dia. (11.63 Kg/6 RMT)

252 Providing and, fixing heavy duty flange type brass cable 58.00 Nos. 33.33

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (A) 2 to 4 core 2.5 / 4 Sq. mm

253 Providing and, fixing heavy duty flange type brass double 4.00 Nos. 75.75

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.(B) 3 & 1/2

254 Providing and, fixing heavy duty flange type brass double 4.00 Nos. 75.75

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.(B) 3 & 1/2

255 Providing and, fixing heavy duty flange type brass double 2.00 Nos. 140.39

compression type cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.(E) 3 & 1/2

core 120 Sq. mm

256 Solder less crimping type Aluminium lugs conforming to 232.00 Nos. 6.06

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/ 2.5/4/6 Sq.mm

257 Solder less crimping type Aluminium lugs conforming to 16.00 Nos. 20.20

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. (D) 35 Sq.mm.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

258 Solder less crimping type Aluminium lugs conforming to 16.00 Nos. 20.20

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. (D) 50 Sq.mm.

259 Solder less crimping type Aluminium lugs conforming to 8.00 Nos. 45.45

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

manner. (G) 120 Sq.mm.

260 Providing and erecting Approved make Ceiling fan with 47.00 Nos. 1596.81

double ball bearing ISI mark with condenser A.C. 230V.50

Hz.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by

Engineer in charge] (Make:- Crompton,Orient )

261 Providing & erecting Approved make Ceiling Fan with 9.00 Nos. 1982.63

double ball bearing with Condenser 230 volt A.C.50 Hz.

900 mm sweep complete having 3 Aluminium blades,

canopy erected complete. [ Make shall be approved by

Engineer in Charge] (Make:- Crompton,Orient )

262 Supplying and erecting 19 / 20 mm. nominal bore Medium 56.00 Mtrs. 108.07

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leckage and

263 Supplying & erecting fan hook box of 10 mm M.S. round 56.00 Nos. 108.07

bar bounded to the RCC bars up to 50mm length each side

and pierced through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in Ceiling with

necessary finishing.

264 Supplying & erecting approved make low noise decorative 13.00 Nos. 1366.53

exhaust fan having square frame ABS body with inbuilt

lowers & square frame. 250mm with 1350 RPM Cat.II

(Make:- Crompton,Orient )

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

265 Supplying and erecting approved make Octagonal pole 15.00 Nos. 9011.22

made from HR sheet steel. The pole should be made as per

IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for

cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering

site requirement.(D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary

G.I. J Bolts .Approx Pole weight 59 kg

266 Supplying & erecting approved make SMC press moulded 14.00 Nos. 515.10

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements with

mounting clamp with nuts, bolts & washers suitable for

erection on pole with cable clamps& earth bolt of following

size of box.(b) 250mm x 200mm x 100mm [deep]

267 Providing street light pole bracket comprising main B Class 15.00 Nos. 561.56

MS pipe of 4.2 cm/require outside dia. complete with

suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5 mm / 80mm. / require

size pole top having sufficient fastners for fixing the

brackets and having spread of 1 mtr. length with suitable

rise as per site condition & suitable welded stiffener

reducer and nipple with check nut complete painted with

one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 1 Mtr

268 Supplying & erecting approved make Digital time switch 2.00 Nos. 3168.37

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

contacts Minimum switching setup time 1 minimum &

LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as directed.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

269 Supplying & erecting power contactor ,AC3 duty for time 2.00 Nos. 2782.55

switch complete erected as per direction Cat III (Make:-

Indoasian, L&T (LK), ABB, Schneider) [D] 4 pole 440V

270 Providing and erecting approved make split air- 20.00 Nos. 40502.01

conditioning unit consisting of copper condensing unit with

fan motor, hermetically sealed rotary compressor with

accessories etc. duly connected separately erected

evaporating unit and blower motor with its accessories by

means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes powder

coated Stand, Eco Friendly green gas charging, 15A plug

top & Remote Control) with necessary core cutting.(1)For

ISEER Range (KWH/KWH)(3.1 to 3.99) (b) for 1.5 ton

capacity (Make:-Daikin, Blue star)

271 Supplying and erecting insulated pair of soft copper tubing 100.00 Rmts. 1158.47

open or concealed including power and control

cable,necessary PVC drain pipes for Split AC machine up

to 4 TR capacity

272 Providing and erecting water cooler having storage capacity 1.00 Nos. 54515.76

80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient

temp of 45˚ C. The outlet temp. of the water should drop by

15˚ C within a hour, The water cooler should be comprising

of hermetically sealed compressor, fan motor, condensing

unit, water tank surrounded by evaporating coil,

thermostats, relay etc. complete with necessary inlet &

outlet connection. The body of water cooler will be made

from Stainless Steel. ◦ (Make:-Voltas, Usha, Blue star)

273 Supplying & erecting 5 stage single reverse osmosis water 1.00 Nos. 15620.66

purification system with M.S. powder coated frame,

prefilter housing with 'O' ring presediment filter GAC filter,

carbon filter suitable buster DC pump capacity 80 psi,

mention with 40 psi inline type post carbon filter auto low

& high pressure switches with following size of storage

tank & LPH capacity & erected as directed [B] 25 Ltr / Hr

with 30 Ltr. Storage Tank

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

274 Supplying and erecting horizontal / vertical mounting type 9.00 Nos. 7027.58

storage water heater with copper container housed in

M.S./S.S./ABS body insulated with glass wool/puff

complete with heating elements,adjustable thermostats

300C to 850C, indicating lamp, safety valve, fusible plug,

etc.complete erected with coach bolts, nuts. washers &

cementation (A) 10 Ltr. with 3 KW. heating element Cat-

275 Supplying and erecting approved make panel mounting 3.00 Nos. 1275.63

type Digital Voltmeter having 3 digits LED display, 0 to

750 AC Volts range erected on existing panel board with

all connection, wiring etc .with manufacturers calibration

276 Supplying and erecting approved make panel mounting 3.00 Nos. 1558.43

type Digital Ammeter having 3 digits LED display,

external CT operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc .with

manufacturers calibration certificate.

277 Providing & erecting L.T. Current Transformer with bar 9.00 Nos. 274.72

primary 50/5 to 1000/5 ratio 15 VA burden erected in

existing CRCA box duly secured with insulating materials

connected to the meter

278 Supplying and erecting approved make suitable panel 9.00 Nos. 43.43

indicator LED type lamp, lens cover, complete erected with

necessary connections.

279 Providing & erecting open well horizontal mono block 2.00 Nos. 17279.08

pump set with cast iron body, complete for three phase

submersible motor having[C] For 3 HP 3 phase open well

horizontal mono block pump set suitable for 85 LPM to

270 LPM @ 11 mtr to 33 mtr head suitable for 50/65 mm

dia delivery pipe Cat.II

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

280 Supplying & erecting approved make motor control 2.00 Nos. 7722.46

cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of

suitable size of ON- OFF isolator (AC - 3/23duty) main

fuses, single phasing preventer, indicating lamps for R- Y -

B phases, overload relay, Automatic water level controller,

Ammeter, Voltmeter each with two way selector switch

incoming, wires duly socket crimped, main contactor &

overload relay, start - stop push buttons, to be erected on

angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L & T, Siemens or

BCH make only.(A) DOL up to 5.0 H.P.

281 Providing and erecting ISI marked PVC insulated PVC 120.00 Mtrs. 146.45

Sheathed Flat flexible Submersible copper cable approved

make of following Size. (C) 3 Core x 4 Sq. mm

282 Providing Water proof straight Joint in PVC insulated flat 2.00 Nos. 189.88

flexible copper cable by using insulating material, water

proofing material, & making the joint complete. (A) Up to

283 Supplying of following size of HEAVY UPVC column 60.00 Rmts. 359.56

pipe with coupler and wire lock [B] 50 mm dia

284 Supplying, & erecting C.I. swing, check type non-return 2.00 Nos. 1020.10

(Reflux) Valve -ISI marked suitable for following size (A)

285 Supply of following size of TOP & BOTTOM accessories 2.00 Per Set 1489.75

i.e. Adaptor set (CI) long, pump guard set, starter pipe

Rubber ring for submersible pump & UPVC column pipe

as directed by Engineer - in - charge with necessary

plumbing as desired.[D] 50 mm dia

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

286 Supply, Installation, Testing and Commissioning (SITC) of Silent Type Diesel 1.00 Nos. 844805.41

Generating (DG) Set(s) of prime power rating (kVA) as specified, complete as

a packaged system, conforming to CPCB IV+ (or better) emission norms, and

complying with all applicable statutory requirements, codes and standards

including (but not limited to) IS 4722:1968, IS 13364 (Part 2) and BS

(latest editions/amendments). The DG set shall be suitable for 415 V ±10%,

Hz ±5%, 3-phase, 4-wire operation at 0.8 lagging power factor, 1500 RPM, for

tropical conditions, and shall be capable of delivering 10% overload for one (1)

hour after twelve (12) hours of continuous operation (ISO 8528), unless

otherwise stated by the OEM. The scope shall include complete accessories,

interconnections, foundations/anti-vibration arrangements, exhaust system,

acoustic enclosure, earthing (as required), consumables for first

commissioning, and all works necessary to render the installation fully

functional and compliant, as directed by the Engineer-in-Charge (EIC). Factory

testing shall be carried out with fuel and load bank at 0.8 power factor and the

DG set shall be offered for inspection prior to dispatch. The DG set shall be

provided with a durable QR code/label fixed on the enclosure/control panel,

linking to a document repository containing (as a minimum) approved GA

drawings, wiring diagrams, foundation and installation details, OEM

catalogues, operating & maintenance manuals, factory test reports, type test

certificates (where applicable), warranty certificate, geo-tag of manufacturing

location, and rating plate data as per relevant IS/BS/ISO requirements. The

OEM/Contractor shall provide a Remote Monitoring System (RMS) with

minimum one (1) year connectivity (SIM/data plan/server access as applicable),

including dashboard access, user ID/password, and data download facility.

RMS shall, at minimum, capture and report: DG status (Auto/Manual/Off),

start/stop events, kW/kVA/kVAR, V/I/Hz, PF, run hours, fuel level, battery

voltage, alarms/trips with time stamp, and GPS/location (where supported). All

licences/subscriptions required for the stated period shall be included in the

quoted price.(A) Diesel Engine:

Turbocharged, 4-stroke, water-cooled, multi-cylinder diesel engine, suitably

rated for the specified DG set prime rating at site conditions, complete with

dynamically balanced flywheel, heavy-duty engine mounting, and electric

starting arrangement. The engine governing shall be electronic

(isochronous/droop as per OEM standard) and shall comply with ISO 8528/BS

5514 requirements for steady-state speed regulation. Engine shall be complete

with dry type air cleaner with restriction indicator, lube oil cooler (if required),

radiator/cooling package (as applicable), and all sensors/switches required for

protections and annunciation. The engine shall be capable of 10% overload for

one (1) hour after twelve (12) hours continuous operation and shall be suitable

for continuous duty under tropical ambient conditions. The offered engine

model shall be CPCB IV+ compliant and shall be supplied with complete

emission control/after-treatment system (including DEF/urea dosing where

applicable) along with all accessories, tanks, pumps, heaters and controls

required for compliant operation. The supply shall include first fill of

lubricating oil, coolant and consumables required for initial commissioning and

testing. All fasteners, couplings, guards, hoses and standard/recommended

accessories required for safe and reliable operation shall be included and shall

be subject to inspection/approval by the EIC. (B) Engine-Mounted

Instrumentation/Control Panel:

Engine-mounted instrument/control panel shall be microprocessor based, with

LCD/LED display, event log and alarm/trip annunciation, complete with all

wiring, harnesses and terminations. Indications/protections shall include

(minimum) the following and any additional protections recommended by the

OEM: (i) Start/Stop key switch and/or push buttons with emergency stop; (ii)

Output breaker: suitably rated 4-pole ACB/MCCB/MCB as applicable, with

minimum 25 kA rupturing capacity (or as per fault level at site, whichever is

OEM/Contractor shall provide a Remote Monitoring System (RMS) with

minimum one (1) year connectivity (SIM/data plan/server access as applicable),

including dashboard access, user ID/password, and data download facility. Estimated

RMS shall, at minimum, capture and report: DG status (Auto/Manual/Off), Rates Total Amount

RMS shall, at minimum, capture and report: DG status (Auto/Manual/Off), Rates Total Amount

Item start/stop events, kW/kVA/kVAR, V/I/Hz, PF, run hours, fuel level, battery according

Item of work Quantity Unit to estimated

No. voltage, alarms/trips with time stamp, and GPS/location (where supported). All In figure

licences/subscriptions required for the stated period shall be included in the Rs. Ps.

quoted price.(A) Diesel Engine:

1 Turbocharged, 4-stroke, water-cooled,2 multi-cylinder diesel engine, suitably 3 4 5

rated for the specified DG set prime rating at site conditions, complete with

dynamically balanced flywheel, heavy-duty engine mounting, and electric

starting arrangement. The engine governing shall be electronic

(isochronous/droop as per OEM standard) and shall comply with ISO 8528/BS

5514 requirements for steady-state speed regulation. Engine shall be complete

with dry type air cleaner with restriction indicator, lube oil cooler (if required),

radiator/cooling package (as applicable), and all sensors/switches required for

protections and annunciation. The engine shall be capable of 10% overload for

one (1) hour after twelve (12) hours continuous operation and shall be suitable

for continuous duty under tropical ambient conditions. The offered engine

model shall be CPCB IV+ compliant and shall be supplied with complete

emission control/after-treatment system (including DEF/urea dosing where

applicable) along with all accessories, tanks, pumps, heaters and controls

required for compliant operation. The supply shall include first fill of

lubricating oil, coolant and consumables required for initial commissioning and

testing. All fasteners, couplings, guards, hoses and standard/recommended

accessories required for safe and reliable operation shall be included and shall

be subject to inspection/approval by the EIC. (B) Engine-Mounted

Instrumentation/Control Panel:

Engine-mounted instrument/control panel shall be microprocessor based, with

LCD/LED display, event log and alarm/trip annunciation, complete with all

wiring, harnesses and terminations. Indications/protections shall include

(minimum) the following and any additional protections recommended by the

OEM: (i) Start/Stop key switch and/or push buttons with emergency stop; (ii)

Output breaker: suitably rated 4-pole ACB/MCCB/MCB as applicable, with

minimum 25 kA rupturing capacity (or as per fault level at site, whichever is

higher), with shunt trip where required; (iii) Jacket water/coolant temperature –

indication and high temperature alarm/trip; (iv) Lube oil pressure – indication

and low pressure alarm/trip; (v) Lube oil temperature (where provided) –

indication/alarm; (vi) Battery charging indication, battery voltage indication

and charging failure alarm; (vii) Engine speed (RPM) indication and overspeed

trip; (viii) Engine running hours meter (non-resettable); (ix) Fuel level

indication and low fuel alarm; (x) Fail-to-start / crank fail alarm; (xi)

Under/over frequency and under/over voltage protection (alternator side) as

applicable; (xii) Common alarm and common trip indication with potential-free

contacts for BMS/remote annunciation. All meters/indications shall be of

proven industrial quality and the panel shall be wired, ferruled and labelled.

The contractor shall submit wiring diagrams, protection settings and datasheets

for approval prior to dispatch/installation. (C) Alternator:

Synchronous, brushless alternator of appropriate kVA rating, 415 V, 3-phase,

50 Hz, 1500 RPM, 0.8 lagging PF, continuous duty, dynamically balanced

rotor, self-cooled, self-excited and AVR regulated. Enclosure shall be SPDP,

minimum IP23. Insulation shall be Class H with suitable tropicalization;

temperature rise shall be within limits of the applicable standard. The alternator

shall comply with IS 13364 (Part 2), IS 4722 and/or BS 2613 (latest), as

applicable. Voltage regulation with AVR shall be within ±1.0% (steady state)

or OEM standard whichever is better. The alternator shall be capable of 10%

overload for one (1) hour after twelve (12) hours of continuous operation.

Harmonic distortion shall be suitable for non-linear loads; alternator shall be

equipped with appropriate AVR features (e.g., soft start, UFRO) and shall be

suitable for motor starting duties typical to the installation. Terminals shall be

brought out to a terminal box with adequate space for termination and shall

include earthing terminals. All routine/type test certificates (as applicable) shall

be submitted for acceptance. (D) Base Frame &

Foundation: Engine and alternator shall be mounted on a suitably designed,

fabricated MS channel base frame with stiffeners, lifting arrangement and

shall comply with IS 13364 (Part 2), IS 4722 and/or BS 2613 (latest), as

applicable. Voltage regulation with AVR shall be within ±1.0% (steady state)

or OEM standard whichever is better. The alternator shall be capable of 10%

Rates Total Amount

Rates Total Amount

Item overload for one (1) hour after twelve (12) hours of continuous operation. according

Harmonic distortion shall be suitable non-linear loads; alternator shall be Quantity Unit to estimated

equipped with appropriate AVR features (e.g., soft start, UFRO) and shall be quantities

suitable for motor starting duties typical to the installation. Terminals shall be Rs. Ps.

brought out to a terminal box with adequate space for termination and shall

1 include earthing terminals. All routine/type

2 test certificates (as applicable) shall 3 4 5

be submitted for acceptance. (D) Base Frame &

Foundation: Engine and alternator shall be mounted on a suitably designed,

fabricated MS channel base frame with stiffeners, lifting arrangement and

coupling guard, duly painted/treated for corrosion protection. The set shall be

installed on an adequately designed cement concrete foundation/pedestal with

anchor bolts, pockets, grouting and anti-vibration mounts (AVMs) / spring

isolators as per OEM recommendations and site conditions. Vibration levels

shall be within OEM permissible limits. The contractor shall be responsible for

alignment, levelling, tightening torque and re-check after load trial, complete in

all respects. (E) Fuel Tank: In-built/base fuel tank fabricated from minimum

mm thick MS sheet, duly leak-tested, complete with filling arrangement, vent,

drain, cleaning opening, level indication and isolation valve(s). The capacity

shall be adequate for minimum eight (8) hours continuous operation at full

load. Fuel piping between tank and engine shall be MS ‘C’ class pipes of

suitable diameter with compatible flexible connections (where required),

complete with all valves, clamps, supports, unions and fittings. Any additional

safety provisions required by local fire authority/UGVCL/competent authority

(such as double wall/bunding, flame arrestor, etc.) shall be provided within the

(F) Exhaust System: Heavy-duty residential type exhaust silencer suitable for

CPCB IV+ installation (with DEF/after-treatment system wherever applicable)

along with exhaust piping of required length, bends, supports and flexible

bellow, complete with rain cap, drain arrangement and all accessories. Exhaust

piping shall be thermally insulated/lagged and cladded where required to

ensure personnel safety and to limit heat radiation inside the DG

room/enclosure. The complete exhaust arrangement shall be designed such that

engine exhaust back pressure remains within OEM permissible limits and shall

comply with applicable statutory and safety requirements. (G) Starting System:

12 V / 24 V DC electric starting system (as per OEM design) comprising starter

motor(s), battery charger/alternator charging arrangement, relays, cabling and

terminals, complete with maintenance-free batteries of suitable Ah capacity to

ensure minimum three (3) consecutive cranking attempts. System shall include

battery isolator and indication of charging healthy/failure. All battery

interconnections shall be with crimped lugs, insulated sleeves and proper

supports, complete in all respects.

(H) Acoustic and Weatherproof Enclosure: Acoustic enclosure shall be factory-

fabricated, weatherproof and corrosion protected, suitable for outdoor

installation, with minimum IP65 protection (or better) for the enclosure body.

Enclosure design shall provide adequate fresh air intake and hot air discharge

for engine radiator and alternator cooling such that the internal temperature rise

remains within OEM limits at full load. Provision shall be made for safe

access/maintenance including lockable doors, viewing window (where

provided), emergency stop access, and cable entry glands. Noise level of the

complete DG set with enclosure shall not exceed 75 dB(A) measured at 1.0 m

distance in free field conditions, in accordance with applicable CPCB

requirements. The enclosure shall comply with CPCB IV+ (or better)

requirements and other applicable local rules/regulations. All louvers, acoustic

infill/insulation, fasteners and sealing arrangements shall be of fire-

retardant/industrial grade as per OEM standard. Any deviation from the

specified noise/IP requirements shall be treated as non-compliance unless

explicitly approved by the EIC in writing. (I) Continuous rating of 62.5 KVA

,BHP not less than 76 BHP

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

287 AMF Panel: 1.00 Nos. 97320.57

Free standing floor mounted IP 42 automatic mains failure

control panel including auto by-pass, suitable for KVA as

below for silent type DG set complete with relays, timers, set of

CTs for metering & protection and energy analyser to indicate

currents, phase and line voltages, frequency, power factor,

KWH, Kilo Volt Ampere Reative Hour (KVARH), KVA

(Phase & Total), KW (MFM) & provision for overload, short

circuit, restricted earth fault, under frequency, all complete

and inter locking and communication/ Ethernet

/RS485/SNMP port open protocol for BMS integration

including suitable software, the panel shall be of DG Set. as

per approved by Engineering in charge and including the

1. Suitable numbers and appropriate capacity 4 ACB/

MCCB with electronic release for O/C & E/F and shunt trip.

(Icu=100%Ics) (Not below 25KA Breaking Capacity at

415Volts), (Total Three Breakers)

2. Auto/Manual/Test/Off selector switch

3. Protection for under and over voltage phase reversal

(2 nos Over voltage relay, 2 Nos. reverse power relay and

Nos. under voltage relay).

4. 3 Sets of current transformers 15 P 10 accuracy for

protection and 15 VA class-I for metering

5. Energy analyser unit to indicate current, Voltage( L- N &

L_L), kW, kVA (Phase & Total), Frequency, KWH, PF.

6. LED Indicating lamps for load on mains and load on set

7. Fuse/ MCB for instruments

8. Battery charger, complete with transformer/ rectifier, D.C.

voltmeter and ammeter, selector switch for trickle, off and

boost and current adjustment.

9. Control/Signal/Multi core/Communication Cables between

DG Set and AMF Panel upto 20 Mtr

10. Main supply failure monitor 11. Supply failure timer

12. Restoration timer

13. Control unit with three impulse automatic engine

start/stop and failure to start lockout.

14. Impulse counter with locking and reset facility.

15. ON/OFF/Control circuit switch with indicator

16. Audio/Video annunciation for

(Icu=100%Ics) (Not below 25KA Breaking Capacity at

415Volts), (Total Three Breakers) Total Amount

415Volts), (Total Three Breakers) Total Amount

Item 2. Auto/Manual/Test/Off selector switch according

Item of work Quantity Unit to estimated

No. 3. Protection for under and over voltage phase reversal In figure

(2 nos Over voltage relay, 2 Nos. reverse power relay and

1 Nos. under voltage relay). 2 3 4 5

4. 3 Sets of current transformers 15 P 10 accuracy for

protection and 15 VA class-I for metering

5. Energy analyser unit to indicate current, Voltage( L- N &

L_L), kW, kVA (Phase & Total), Frequency, KWH, PF.

6. LED Indicating lamps for load on mains and load on set

7. Fuse/ MCB for instruments

8. Battery charger, complete with transformer/ rectifier, D.C.

voltmeter and ammeter, selector switch for trickle, off and

boost and current adjustment.

9. Control/Signal/Multi core/Communication Cables between

DG Set and AMF Panel upto 20 Mtr

10. Main supply failure monitor 11. Supply failure timer

12. Restoration timer

13. Control unit with three impulse automatic engine

start/stop and failure to start lockout.

14. Impulse counter with locking and reset facility.

15. ON/OFF/Control circuit switch with indicator

16. Audio/Video annunciation for

(i) High water temperature

(ii) Low lubricating oil pressure

(iii) Engine over speed

(iv) Engine fails to start

(v) Full load/maximum load warning

16. Protection for over/under Frequency, Loss of AC

sensing, Over Current, Unbalancing load with suitable number

of relays and accessories

17. Maintenance notification based on Engine Run Hour &

18. Load Management through PLC to achieve auto opening

and closing of incomer breakers, bus coupler switching of

essential panel , interlocking providing signal to AMF Panel

for load status and AMF shall give command to DG Set to

auto start / auto stop depending upon load status and

requirement etc. and necessary hardware and software

required to perform the operation shall be provided by

the contractor including all control wiring.(A) AMF Control

Panel for 50/62.5 kVA 3 phase DG Set

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

288 Supply Erecting and Testing Compact General Purpose 5 1.00 Nos. 2833.05

Channel PA Mixer Preamplifier having following

(1) 5 Mic/Aux inputs with individual volume controls.

(2) Selectable HI/LO sensitivity for AUX inputs.

(3) Compact and easy to use.

(4) Peak LED for setting distortion-free input levels.

(5) Outputs:-1 x Preamp 200mV/600Ω

(6) Frequency Response :- 20-20,000Hz (±3dB)

(7) Distortion :- <1%

(8) Signal to Noise Ratio :- 40dB

(9) Input Channels :- 5 x Mic 0.6mV/4.7k2, 5 x Aux LO

Aux Hl 150mV/470kΩ (Mic/Aux LO/Aux HI

(10) Power Supply :- AC: 220-240V 50/60Hz, DC: 12V

(1×12V Car Battery)

(11) Dimension :- W215x H60 × D125 mm

(12) Weight :- 1.20kg

Make Ahuja - MMX-55

289 Supply Erecting and Testing USB Audio Interface having 1.00 Nos. 11665.50

following Spections (1) 2x4 USB 2.0 Audio/MIDI

Interface for recording microphones and instruments

Audiophile 24-Bit/192 kHz resolution for professional

audio quality. (2) Compatible with popular recording

software including Avid Pro Tools", Ableton Live,

Steinberg Cubase, etc. Streams 2 inputs/4 outputs plus 1x

MIDI I/O with ultra-low latency to your computer,

supporting Mac OS X and Windows XP or higher.(3)

state-of-the-art, Midas designed Mic Preamplifiers with

+48 V phantom powe (4) Analog Inserts for use of

external effects such as compressors, etc. (5) Zero-latency

direct monitoring while recording.(6) Input Playback Mix

control and Stereo/Mono switch for direct monitoring.

(7)Powerful Phones output with Level control and Monitor

A/B source select for DJ-style cueing (8)Status. Signal and

Clip indications for perfect overview. (9)USB port for

connection and power (10) "Built-like-a-tank", impact-

resistant metal chassis. Make:- Behringer U-Phoria

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

290 Supply Erecting and Testing ,30 W RMS / 45W Max. high 4.00 Nos. 6554.90

fidelity 2-Way PA Wall Speaker in compact & attractive

Black or White plastic housing. The suffix B & BT denote

Black cabinet, and W & WT denote White

cabinet.Comprises of a Water Resistant PP coated cone

Woofer, a Titanium Dome Tweeter and a 2-way Crossover

Network with low Impedance 812 speakers are meant for

use on 100V line with power taps of 30W, 20W, 15W,

10W & 5W.Frequency response 75-20000Hz , SPL at 1kHz

(1W/1m) - 87 db .With speaker size - Woofer 100mm

(4"), Tweeter 25mm (1") Easy power tap selection through

a slotted rotary switch knob at the rear.Weight - 2.45kg /

'U' type bracket for convenient & firm mounting of the wall

Ideal for various background music & general PA

Make:- Ahuja ASX-312WT.

291 SITC of Providing & erecting, programming, testing of 1.00 Nos. 15498.45

chairman unit microphone with flexible stem of 480 mm in

length and light ring built in loud speaker ,two head phone

socket ,attractive design ,priority button for chairman

microphone,built in volume control for head phones,chime

tone facility to precede chairman priority calls,microphone

on/off button,red indicates for microphone is

active,frequency response -400Hz to 10kHz,nominal

acoustic input -85 dB SPL CCSE-CMS Chairperson device

long mic, black. Bosch- CCS -700

292 Providing & erecting, programming, testing of Delegate 10.00 Nos. 15054.05

unit microphone with flexible stem of 480 mm in length

and light ring built in loud speaker ,two head phone socket

,attractive design ,built in volume control for head

phones,chime tone facility to precede chairman priority

calls,microphone on/off button,red indicates for

microphone is active,frequency response -400Hz to

10kHz,nominal acoustic input -85 dB SPL. CCSE-DL

Participant device long mic, black. Bosch CCS -700

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

293 SITC of Controller Unit for digital conference system, 1.00 Nos. 32096.79

capable of controlling and managing active microphones

and operating modes without the need for a central

operator. The controller unit shall support connection of up

to 50 delegate units

The unit shall allow connection of external audio

equipment for system expansion. It shall be provided with a

built-in loudspeaker and headphone output for monitoring

of conference proceedings.

294 Supply,Installation,Testing and Commissioning of Set of 6.00 Nos. 37174.06

Transmitter & Receiver for HDMI Signal Extension over

CATx Cable Should have minimum 1xHDMI Input or

better; Should have minmum 1xCatX Output or better;

Should enables extension of HDMI video and audio

signals; Should support minimum 4K and UHD at up to

130 ft or better; Should support minimumHD 1080p,

WUXGA, and 2K at up to 230 ft (70 m) or better; Should

handles 4K video resolutions with minimum 4K60 4:2:0

and 4K30 4:4:4 or better; Should handles 3D video and

Deep Color Signal; Should supports audio formats of

Dolby Digital, Dolby Digital EX, Dolby Digital Plus,

Dolby TrueHD, Dolby Atmos, DTS, DTS ES, DTS 96/24,

DTS HD High Res, DTS-HD Master Audio, DTS:X,

LPCM up to 8 channels; Should support HDCP 2.2 or

better; Should support CEC signals; Should have a built in

USB Charging output port for powering up USB devices or

an external USB charger to should be supplied.; Should

support management of EDID; Should support DVI and

Dual-Mode DisplayPort Video signals or better; Should

have flanges for mounting underneath the table or aditional

mounting accessories should be supplied.; Should have

power adapter supplied with the unit; Should be UL Listed,

CE, IC, FCC Part 15 Class B digital device

compliant;(Kramer, Crestron,Aten, Milestone or Eq. make)

295 Supply, Installation, Testing and Commissioning of HDMI 120.00 Mtrs. 455.51

to HDMI (HDMI 2.1) Fiber Cable (Active Optical Cables)

Transmits 4K@50/60Hz losslessly over long distances,

HDMI 2.0a/b; supports VR and 3D, Lossless Video-Audio

formats (Dolby True HD, DTS-HD), Data transfer rate

18Gbps, Supports ARC, HEC, CEC, and

EDID.(Honeywell, Aten, BlueRigger or Eq. make)

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

296 SITC of 4 x 4 HDMI Switcher with 4 HDMI input and 4 1.00 Nos. 121710.05

HDMI output allowing the connection of 4 HDMI sources

to up to 08 displays.Video resolutions up to 4K@60Hz

(YUV 4:4:4) on all HDMI & CAT ports.HDMI ports

support 18Gbps lossless compressed video bandwidth.

HDR, HDR10, HDR10+, Dolby Vision & HLG. HDbaseT

output can extend the transmission distance up to

230ft/70m via a single CAT6 cable. Advanced EDID

management and CEC control. One-way IR matrix

function. Control via front panel buttons, IR remote, RS-

232, LAN and Web GUI. Make :-

Crestron/Lightware/Kramer Or Eqi

297 SITC Of Cable cubby having 1x HDMI, 2xPower, 1 x LAN 2.00 Nos. 13198.68

Port, 1x USB.Make :- Custom

298 Supply, Installation, Testing and Comissioning of USB 1.00 Nos. 52039.24

PTZ Full HD 1080p@30fps Video Conferencing Camera,

1/2.8" CMOS 2.16 MP sensor, 62 degree FOV, 10X

Optical Zoom with Enhanced PTZ, PAN ± 90 degree, Tilt

(+) 90 degree and (-) 30 degree, H.264/MPEG Video

compression, Auto/Manual Focus, USB 2.0 Interface Plug

& Play, BIS, CE,FCC, RoHS certified [Approved by

Competent Authority i.e. not Below the rank of Executive

299 SITC of Shileded 2 core 20 AWG Audio cable 20.00 Mtrs. 111.10

300 SITC of 2 core 2.5sqmm loudspeaker cable 210.00 Mtrs. 122.21

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

301 SITC of HDMI Cable with High-Speed HDMI Cable with 17.00 Nos. 455.51

Ethernet, supporting resolutions up to 4K @ 60Hz, HDR

(High Dynamic Range), with a bandwidth of 18 Gbps.

Connectors are HDMI Type-A (Male) to HDMI Type-A

(Male), gold- plated for enhanced signal transfer and

corrosion resistance. Features include ARC (Audio Return

Channel), 3D, Deep Color, and HDCP 2.2 support. The

cable is triple-shielded for minimum interference and

maximum signal integrity, with a durable PVC jacket and

strain relief for flexibility and long life. It is compatible

with all HDMI standards(1.4, 2.0 etc.) and certified to meet

HDMI standards for safe and reliable performance. (A)

HDMI Cable-1 Mtr (HDMI version is HDMI 2.1)

302 SITC of HDMI Cable with High-Speed HDMI Cable with 2.00 Nos. 2277.55

Ethernet, supporting resolutions up to 4K @ 60Hz, HDR

(High Dynamic Range), with a bandwidth of 18 Gbps.

Connectors are HDMI Type-A (Male) to HDMI Type-A

(Male), gold- plated for enhanced signal transfer and

corrosion resistance. Features include ARC (Audio Return

Channel), 3D, Deep Color, and HDCP 2.2 support. The

cable is triple-shielded for minimum interference and

maximum signal integrity, with a durable PVC jacket and

strain relief for flexibility and long life. It is compatible

with all HDMI standards(1.4, 2.0 etc.) and certified to meet

HDMI standards for safe and reliable performance. (E)

HDMI Cable-10 Mtr (HDMI version is HDMI 2.1)

303 SITC of USB 5 Mtr Cable 1.00 Nos. 1977.58

304 SITC of USB 5 Mtr Cable SITC of USB 10 Mtr Cable 1.00 Nos. 2944.15

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

305 Supply, Installation, Testing and commissioning of 42/43" 17.00 Nos. 52328.10

UHD Signage/Professional Display|500 Nits Brightness

|50000:1 Contrast Ratio | Operation: 24x7|1xVGA; 2xUSB

2.0 , 4x HDMI 2.0 In, Secure USB 2.0 (Internal), RJ45,

RJ12, RS232, Optical SPDIF|1xHDMI 2.0 out, Supports

Daisy Chain |Speaker 2x10 W|30-degrees Tilting

Installation | Open Content Management Support,

Scheduler, USB-Autoplay, AutoLaunch, HDMI-CEC,

HDMI-Wakeup, Auto-switch on Failover, Panel Lock,

OSD Rotation, NoSignalPowerOff, Screen Saver, Pixel

shift,Scheduler, Videowall support, Remote control via

LAN, Realtime Clock, Joystick, Rocker Switch| Optional :

SDM or OPS compatibility, Embedded IR, IR extender

option | Optional: Overlay Touch Kit

Compatibility|Certifications: Safety, EMC, CE [Sony,

Samsung, LG, Panasonic]

306 Supply, Installation, Testing and commissioning of 55" 1.00 Nos. 69393.06

UHD Signage/Professional Display|500 Nits Brightness

|50000:1 Contrast Ratio peration: 24x7|1xVGA; 2xUSB

2.0, 4x HDMI 2.0 In, Secure USB 2.0 (Internal), RJ45,

RJ12, RS232, Optical SPDIF|1xHDMI 2.0 out, Supports

Daisy Chain |Speaker 2x10 W|30-degrees Tilting

Installation | Open Content Management Support,

Scheduler, USB-Autoplay, AutoLaunch, HDMI-CEC,

HDMI-Wakeup, Auto-switch on Failover, Panel Lock,

OSD Rotation, NoSignalPowerOff, Screen Saver, Pixel

shift,Scheduler, Videowall support, Remote control via

LAN, Realtime Clock, Joystick, Rocker Switch| Optional :

SDM or OPS compatibility, Embedded IR, IR extender

option | Optional: Overlay Touch Kit

Compatibility|Certifications: Safety, EMC, CE [Sony,

Samsung, LG, Panasonic]

307 SITC of Power amplifier, 480W 1.00 Nos. 35635.83

[Approved by Competent Authority i.e. not Below the rank

of Executive Engineer ]

308 SITC of Ceiling loudspeaker 20W, metal 6.00 Nos. 2073.53

[Approved by Competent Authority i.e. not Below the rank

of Executive Engineer ]

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

309 SITC of 3LCD Lamp based projector having wxga 1.00 Nos. 33895.60

(1280x800) or better resolution with minimum white

brightness of 3800 lumens and color brightness of

lumens. The projector should have minimum

1HDMI,1VGA input. Having contrast ratio of 15000:1 or

more. the projector should have auto vertical key stone

correction of +/- 30 degree and Manual Horizontal of +/-30

degree. the projector should have optical lens, throw ratio

1.30-1.56:1. Zoom Factor of 1.2. Lens focus Manual

having focal length 16.9mm to 20.28mm. projector should