Development of office premises at 1st floor Gana - Anand

Given Schedule of Rates (SOR) to be treated in conjunction with Scope of Work/services/supply and terms & conditions given along with enquiry documents.

The above prices are for the complete scope of wok /services/ supplies as defined in the bid/enquiry document. Any materials, works/services required for completion of the work as per scope but not defined in the SOR (schedule of rates), the same is deemed to be included in the quoted price as above.

The bidder shall quote the prices strictly as per the price bid format. Any bid not conforming to the price bid format shall be rejected.

Rates quoted by the bidder shall remain firm and fixed till the successful completion of work and shall not be revised on any account whatsoever.

The quantity mentioned in SOR is indicative and for evaluation purpose only. Actual quantity may vary up to any extent without any change in unit price or terms & conditions of the bid and the bidding documents within Contract Period.

If the price bid submitted by bidder elsewhere other than Price bid (SOR) stage, the bid shall be rejected and shall not be considered for further bid evaluation.

In case of mixed supply, composite supply and works contract, a single rate of GST shall be applicable.

The bid shall be evaluated on the basis of total cost to the company.

After price bid opening and evaluation, Reverse Auction amongst qualified bidders after eliminating H1 bidder (if 3 or less bidders qualified for RA, all bidders shall be allowed for RA) shall be carried out through e-auction portal.

Owner reserves the right to cancel and/or alter bidding process at any stage without assigning any reason. Owner also reserves the right to reject any or all of the bids received at its discretion, without assigning any reasons whatsoever.

GTL reserves the right to reject any or all bid without giving any reason whatsoever.

Bidder to quote there rates against each line items, failing to which the material/service shall be treated as free supply/services.

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Earthwork in excavation foundation of walls, columns, beams etc. in all kinds and for all depths of soil, hard murrum,soft rock, hard rock by pneumatic drilling etc. stacking the excavated earth at least 50m away from the edge of foundation trenches and disposal of surplus soil. The excavated surface to be leveled wherever required shoring and sitting.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Filling in foundation and plinth, under floors, site filling etc. with good quality sand, obtained from outside, including, consolidating, watering and ramming well etc. complete, in layers not exceeding 200mm and compacting the layers to give at least 95% of maxm dry density. For preparation of sub base the layer may 50mm thick as per directions.

Providing & laying PCC [(1 cement : 4 coarse sand : 8 black stone aggregate 40mm. nominal size)] as following in for all depth and thickness Excluding shuttering, ramming and tampering, water curing etc. complete as directed.

Providing and laying in position Ready Mixed M-250 grade concrete Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 450 kg ) Note: USE Conc.Grade M250 for main structural elements Like footing,columns, beams slabs water tank etc. Providing and laying in position Ready Mixed M-250 grade concrete for reinforced cement concrete work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 450 kg )

Ready Mixed M-200 grade concrete for reinforced cement conctere work, Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 400 kg ) Note:USE Conc.Grade M200 for elements Like Stair,Lintels, weathersheds Pardi,etc. Providing and laying in position Ready Mixed M-200 grade concrete for reinforced cement conctere work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 400kg )

Providing and laying lean cement concrete in 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 20 mm nominal size) in shape, form, thickness & size including providing, openings, recesses, chamfering, tamping, water curing, and rendering- if required to give a smooth and even surface etc. all complete, excluding the cost of form work and reinforcement for reinforced concrete work for all floors, at all heights and double heights, core, atriums etc. in any position, for all structures and mass concrete. All levels and size are as per drawing. Honey comb RCC work shall not be accepted. If found in the works then it shall be finished done in rich cement mortar of 1:1 proportion. Also, the same shall be dedcuted @ 150Rs./Smt from the RCC item. tancha work for these surfaces to be carried out as directed and is inclusive of the rates being quoted here in. only mechanical vibrating machine to be used for all purposes.

Providing form work of ordinary timber planking, shuttering plywood or steel plates so as to give smooth finish, including Centering, shuttering, strutting, proping, nails, binding wire etc comp. and removal of same for in-situ reinforced concrete and plain concrete work complete in and as directed by Engineer- in- Charge. For Superstructure works, columns, suspended floors, roofs, landings, balconies, access platform, lintals, beams, girders, bressumers, cantilevers, stairs, parapets, walls etc. complete. Prop Height not exceeding 4.0M.

Providing and fabricating in position Fe 500D TMT reinfocement (confirming to IS:1786), for RCC work including transporting the steel to site of work,Straightening, cleaning, cutting, bending to required shapes and lengths as per details, binding with contractor's own M.S. 18 guage black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, welding, etc. for all heights and depths etc. all complete as per specificatons and directions of owner/owner's representative. (Supports ,Chairs and laps are included in the measurable BOQ quantity)Reinforcement steel shall be of Tata, Sail, vizag or approved by consultant..

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kil ometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars.

Site cleaning work-dispose the debris and malba etc. complete with including loading at site, transporting & unloading at disposal location away from this site and statutory limits, all as per the location/s and instructions of the client/consultant. The site of work to be keep clean at all times by removing any kinds of unwanted materials in the work area like nails, sheets, logs, debries what soever.

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Supplying and constructing Brick work using common brunt clay table mould conventional building bricks, having crushing strength not less than 35 kg/sq. cm. ,upto plinth Level in C.M. (1:5) including water curing, scafolding etc compelete, as per drawing, details and as directed.

20 mm thick Sand face plaster on walls upto any height above ground level consisting of 12 mm. thick backing coat with rough finish of CM 1:4(1 Cement: 4 Sand) and 8 mm thick finishing coat using sponge in, CM 1:2(1 Cement: 2 Sand), including scafolding, water proofing addetives, plaster groove, Tapak as rain drip (rates included) & curing etc. compelete. This includes providing and fixing 22 Gauge SS chicken wire mesh at junctions of concrete and brick masonary including SS nails etc. for Plastering works, complete.

12 mm thick Cement plaster 1:4 ( 1 cement : 4 fine sand ) on internal walls at all floors, at all heights with necessary water proofing addetives (rates included) , preparation of base surfaces,hacking the Brick msaonary or RCC Surface, The plaster surface shall be rubbed with iron plate till the surfaces become smooth, including Scaffoldings, Tools and Tackles and curing, etc.The work shall be in line and level. the plaster to make even finish at all height as per direction of the engineer in charge. This includes Providing and fixing 22 Gauge SS chicken wire mesh at junctions of concrete and brick masonary including SS nails etc. for Plastering works, complete

6 mm or more thick finished cement plaster on soffits at all heights with necessary water proofing addetives (rates included) to RCC slab, chhajjas, stairs etc. internally or externally in mortar 1:3 (1 cement : 3 sand) including hacking of RCC surfaces, scaffolding and curing etc. complete.

Supply and mixing of Water proofing Compound of CICO No-1 or Other equivalent make in RCC works as well as in Plastering works as per the manufracturers guide lines.The rate to be applicable only if the application not mentioned in that perticular item.

Providing water proof cement vata (10 cm x 10 cm size ) quarter round in cement mortar 1:1 including neat cement finishing watering etc. complete.

Providing and Fixing as per any patterns and patta of China Mosaic at various levels in the building. The tile-chips to be laid over 20 mm thick bed of cement mortar 1:3 ( 1 cement, 3 coarse sand) and joints to be filled with white cement mixed with pigments of aproved shade and colours. The Tile Chips must be made from glazed tiles of first quality broken to a uniform size of approximately 1"X1" chips in various shades. The entire surface then to be apllied with xypox transparent sealer coat complete.

Extra Above Item 1.1 for Brick Work in Superstructure Above Plinth Level

Half brick masonry in common burnt clay building bricks having crushing strength not less than 35 Kg/SQ. CM. in cement mortar 1:3 (1 Cement, : 3 coarse sand with 2 nos of 6mm mild steel round bars after every three course embedded in cement mortar in superstructure above plinth level

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Providing and painting with two OR more coats of exterior grade water proof 100 % acrylic ASIAN - APEX ULTIMA paint of approved shade/s in plain, patta and grooves etc. and make all inclusive of primering, putty and crack filling complete as per manufacturer’s specifications including cleaning the surface, scaffolding etc. complete and directed by engineer.

Painting of all exposed interior surfaces with two or more coats of Acrylic emulsion Asian Royale paint including; scraping, primer application, filling with acrylic putty etc. complete. Final coat of paint with smooth roller finish. No brush marks to be visible after painting. Multiple Colors and shades as approved by the Architects. After cleaning is compulsory on job completion.

Providing and painting with three OR more coats of synthetic enamal water proof ASIAN paint of approved shade/s in plain, patta and grooves etc. and make all inclusive of primering, putty and joint filler complete as per manufacturer’s specifications including cleaning the surface, scaffolding etc. complete and directed by engineer.

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Kotah Stone Work: Providing and fixing 25 mm thick mirror polished, finished, both hand cut and machine cut as per requirements stone as per drawing, laid over 10mm thick base BAL ENDURA mortar and addetives of approprieate class designagtion over 50 to 75mm cement mortar 1:3 (1 cement : 3 coarse sand ) with joints treated with cement mixed with matching pigment epoxy touch up including rubbing, curing including dimand edge nosing of corners etc. complete as per below mentioned [1] For cut size flooring and skirting as: in size of 300x300, 450x600 and or as per instructions in any size and for [2] For full length and width size stone in stair's treads, riser, landing patta, and foyer peripheral patta, full length skirting etc. The work incldes design, cut & paste, patch work in stone as necessary for accomodating railing posts, services etc. This ncludes Preparing Half Round, bull nose, curved/flat chamfering or any shape Moulding in Stones including mirror polishing and finishing on the same as directed by Engineer In Charge. Preparing V / D / C profiles tripple lined 3 (three) rows Grooves on Stones as directed by Engineer In Charge.

Providing & fixing flooring of vitrified flooring tile of approved make in different design. The surface preparation is inclusive of and to be done 1:3 cement mortar bedding and BAL ENDURA readymix mortar admixture and refinishing it to receive tiles complete all as per drawings, details, specifications and instructions. Also, the tiling require to be done in any areas to accommodate any kind of building services, in any pattern, patta in shade design & details. The work is all inclusive complete in all manners. Rates for skirting shall be measured in this item only; i.e .in Smt. only.

Providing and fixing in dado & floors vitrified / glazed / ceramic tiles in any size color overall with patch design in other color/s (including ; Approx 35% to 40% as color tiles patch in diff. pattern) including wire rough plaster in dado and of complete color tiles in floors (necessary floor Bedding should be prepared in bricks & cement sand preparation) using approved BAL Endura fixing readymix mortar and adhesive/s, as per manufacturer's recommendation, all as per drawings, details, specifications and instructions. The work is all inclusive complete in all manners. Rates for skirting shall be measured in this item only; i.e .in Smt. only.

Granite Stone Jamb & sill: Providing and fixing 20 mm thick mirror polished stone sill & jamb (for edge protection measuring size equal to both side plastered and or tiled wall thickness as per site finishing for various applications with 10mm fine plaster groove around edges) in jointless length, bredth, size, hand cut and machine cut for visible edges; fine grade material as per drawing to be laid over 20mm thick base BAL ENDURA mortar of approprieate class designagtion & cement mortar 1:3 (1 cement : 3 coarse sand ) with joints treated with cement mixed with matching pigment, epoxy touch up including rubbing, curing including dimand edge nosing of corners etc. complete. the job includes edges in diamond cut and mirror polish finish.

Providing & fitting 20mm Z black granite partitions in any shape and size including making holes & cutouts of desired sizes and nos., all surface and edge mirror polished, support angles all complete as per instructions.

Granite Platforms: Providing & fitting sandwich 25mm thick kotah+ 20mm Z black granite platform in any shape and size including additional granite facia patta of 75mm and including making holes & cutouts of desired sizes and nos., surface and edge mirror polished, support of Kotah and MS angles all complete as per instructions. The sides to be provided with 75mm granite dado inserted into wall for half stone thickness and in 10mm chamfer poilshed edges complete.

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Thickness

Providing & fixing fire escape stairs in composite various sections complete as per design & drawing and a few of the following black polished seamless sections with onsite/factory fabrication, welding, polishing etc. complete complete including anchor fasterners and all sundry materials.

Providing & fixing railing fire escape stairs handrail in composite various sections complete as per design & drawing and a few of the following black polished seamless sections with onsite/factory fabrication, welding, polishing etc. complete complete including anchor fasterners and all sundry materials.

Supplying ,installing , & fixing (Hilti only) Anchor Bolts & anchor fastners 60x10 or suitable for above railing with Nuts in concrete foundation providing, auxiliary dummy structures, if any,necessary tying and welding to reinforcement,adjustment of shuttering, greasing exposed metal surfaces and covering with jute cloths etc. complete as per drawing and specifications and directions.

SS stairs railing: Providing & fixing full modular SS 304 stair for main staircase in following pipes including all anchor fastner etc. complete

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Office Tables & Work Stations

Providing & fixing self supported table for utility (copier, printer, fax etc.) made from 6,12,15 & 18mm MDF and or ply with 32 mm composite prelaminated post formed curvica top, with drawer & cabinet with required hardware & fittings etc. The external surface of the table to be finished in 1mm laminate & internal surfaces to be .8mm laminate. All exposed edges of wood shall be finished with All sides& edges shall be Polymer edge band / curvica & top of Polymer profile in various thickness OR curvica complete. The table unit shall have fixed to it; four drawers on telescopic channel (1 Stationery drawer + 3 paper drawers for max A3 size papers)

Providing & fixing self supported table for conference, made from 6,12,15 & 18mm MDF and or ply with 32 mm composite laminated/prelaminated post formed curvica top OR wood melamine polished edge.The external surface of the table to be finished in 1mm laminate & internal surfaces to be .8mm laminate. All edges of shall be finished with All sides & edges shall be Polymer edge band & top of Polymer profile in various thickness OR curvica complete. The table may be fabricated in parts for installation. The top shall have provision for necessary electrical & IT services.

Providing & fixing self supported table made from 6,12,15 & 18mm MDF and or ply with 32 mm composite prelaminated post formed curvica top, with drawer & cabinet with required hardware & fittings etc. The external surface of the table to be finished in 1mm laminate & internal surfaces to be .8mm laminate. All exposed edges of wood shall be finished with All sides& edges shall be Polymer edge band & top of Polymer profile in various thickness OR curvica complete. The table unit shall have fixed to it; 4 drawers on telescopic channel (1 Stationery drawer + 3 general drawer for file- width size containg A4 & Legal size papers).

Providing & fixing self supported table made from 6,12,15 & 18mm MDF and or ply with 32 mm composite prelaminated post formed curvica top, with drawer & cabinet with required hardware & fittings etc. The external surface of the table to be finished in 1mm laminate & internal surfaces to be .8mm laminate. All exposed edges of wood shall be finished with All sides& edges shall be Polymer edge band & top of Polymer profile in various thickness OR curvica complete. The table unit shall have fixed to it; 4 drawers on telescopic channel (1 Stationery drawer + 3 general drawer for file- width size containg A4 & Legal size papers).

Providing & fixing self supported table made from 6,12,15 & 18mm MDF and or ply with 32 mm composite prelaminated post formed curvica top, with drawer & cabinet with required hardware & fittings etc. The external surface of the table to be finished in 1mm laminate & internal surfaces to be .8mm laminate. All exposed edges of wood shall be finished with All sides& edges shall be Polymer edge band & top of Polymer profile in various thickness OR curvica complete. The table unit shall have fixed to it; 4 drawers on telescopic channel (1 Stationery drawer + 3 general drawer for file- width size containg A4 & Legal size papers).

Providing & fixing self supported table made from 6,12,15 & 18mm MDF and or ply with 32 mm composite prelaminated post formed curvica top, with required hardware & fittings etc. All exposed edges of wood shall be finished with All sides& edges shall be Polymer edge band & top of Polymer profile in various thickness OR curvica complete. The base to be in heavy duty SS circular Dye Cast base & pipe modular assembly / SS four legged base frame.

Storage Units: Utility cabinets / storage

Providing and fixing /full height Ply & wooden Storage fabricated out of 6, 12. 15, 18mm thick MDF & ply with laminate finish. The entire unit to be provided with shutters in both side laminated finished. The storage to be provided with an adjustable shelf. All shutter & shelves internal surfaces to be finished with 0.8 mm laminate. All shutters to be provided with a set of hinges, tower bolts, ball catches etc. The individual unit shall have post formed curvica edges at the top of 25mm thk. complete as per design. The units to have shutters opening on both sides to make access to utility units.

Providing & fixing pantry platform and storage unit complete with 6, 12 & 18 mm pre laminated MDF & ply, shutter & drawers, locks, aluminum/white metal profile handles, hardwares, magnets etc. complete with SS wire framed basket on telescopic drawer channel complete. (Front of platform to be measured & the complete item shall be as per specification.) Overall 6 drawers for standard different utilities to be provided. The rest of the storage to be in shutters.

Providing and fixing /full height Ply & wooden Storage fabricated out of 6, 12. 15, 18mm thick MDF & ply with laminate finish. The entire unit to be provided with shutters in both side laminated finished. The storage to be provided with an adjustable shelf. All shutter & shelves internal surfaces to be finished with 0.8 mm laminate. All shutters to be provided with a set of hinges, tower bolts, ball catches etc. The individual unit shall have post formed curvica edges at the top of 25mm thk. complete as per design.

Providing and fixing /full height Ply & wooden Storage fabricated out of 6, 12. 15, 18mm thick MDF & ply with laminate finish. The entire unit to be provided with shutters in both side laminated finished. The storage to be provided with an adjustable shelf. All shutter & shelves internal surfaces to be finished with 0.8 mm laminate. All shutters to be provided with a set of hinges, tower bolts, ball catches etc. The individual unit shall have post formed curvica edges at the top of 32mm thk. complete as per design.

Partitions & panels

Providing and fixing1200mm height , 75 mm Thk Ply & wooden partition fabricated out of 6, 12. 15, 18mm thick MDF & ply with laminate finish. The item to include if required, the partial upper portion in soft board with armour and cloth complete. Necessary cut outs to be provided for services complete.

Providing and fixing full height , 75 mm Thk Ply & wooden partition fabricated out of 6, 12. 15, 18mm thick MDF & ply with laminate finish and 12mm clear toughned glass. The item to include if required, the partial upper portion in soft board with armour and cloth complete. Necessary cut outs to be provided for services complete.

Providing and fixing full height , 75 mm Thk Ply & wooden partition fabricated out of 6, 12. 15, 18mm thick MDF & ply with laminate finish. The item to include if required, the partial upper portion in soft board with armour and cloth complete. Necessary cut outs to be provided for services complete.

Providing and fixing 1200mm ht, 75 mm Thk Ply & wooden partition fabricated out of 6, 12. 15, 18mm thick MDF & ply with laminate finish. The item to include if required, the partial upper portion in soft board with armour and cloth complete. Necessary cut outs to be provided for services complete.

Doors

Glass Doors: Providing & fixing 12 mm toughened clear float glass doors including all SS patch fitting hardwares, locks etc. complete. The door cut out shall be finished in adjoining toughed glass panes with necessary SS patch fittings etc. complete.

Providing & fixing Partly shashed Pip-in glass & panelled Door including all hardwares & fittings complete. The door shall be made to match overall thickness that of the partition and made from imported seasoned wood, laminate, melamine polish finish complete.

Opening mechanisms: Providing & fixing following heavy duty only opening mechnisms complete in all respects including surface preparation to final floor tile /ceiling finishing etc. complete.

Soft boards & white boards

Providing & fixing 12 mm soft board with 2mm armour and tapestry on recessed 12 mm ply & fixed to wall OR partition using flat design 20mm SS studs & screws complete.

Providing & fixing non magnetic type whiteboard surface suitable for 'marker use' fixed on 18mm plywood with wooden mould frame as per design and in melamine polish finish complete.

False Ceiling & Punning

Providing and fixing 600 X 600 mm. Armstrong fine fissure/Elite/Dune supreme false ceiling using 15 mm thick sheets/board/tegular/micro look fixed to Armstrong silhouette black grooved framework of approved gauge and quality. The frame expansion bolts of suitable size. The sheets shall be fixed to the soffit of the framework with the use of metal screws. Provision shall be made for housing electrical fitting, air conditioning ducting and diffused light through as per the Architects details. No extras shall be paid for cut outs etc.

Providing and fixing Gypsum board (Only India Gypsum) False Ceiling using 15 to 18 mm thick sheets fixed to GI framework of approved gauge and quality. The frame expansion bolts of suitable size. The sheets shall be fixed to the soffit of the framework with the use of metal screws. Provision shall be made for housing electrical fitting, air conditioning ducting and diffused light through as per the Architects details. No extras shall be paid for cut outs etc. For only verticle pattas upto 300 mm size in Gypsum board false Ceiling for in conjuctions with all other ceiling types shall be paid separately.

Providing and fixing 600 X 600 mm. Armstrong laminated false ceiling using 15 mm thick sheets/board/tegular/micro look fixed to Armstrong silhouette black grooved framework of approved gauge and quality. The frame expansion bolts of suitable size. The sheets shall be fixed to the soffit of the framework with the use of metal screws. Provision shall be made for housing electrical fitting, air conditioning ducting and diffused light through as per the Architects details. No extras shall be paid for cut outs etc.

Providing & performing POP punning in wall in required thickness as per site situations complete in thickness to match skirting line with a groove, in line, level & plumb as specified. Further, the punning may require to be done in combed/zigzag, toothed cross/hatched pattern without extras whatsoever.

Blinds, curtains & frosting films

Providing & fixing of roller blinds of approved quality with all necessary fixing accessories in windows & partition as, screen fabric 84.5% PVC/15.5% Polyester Fabric openness factor is 8% with thickness 0.55mm(+/-5%), clutch mechanism, High carbon steel springs, Idler in high strength reinforced plastic, head rail in an aluminium- extruded rail, clamps and bracket made of MS and spring steel duly power coated, operating chain; made of 4.5 mm plastic beads moulded on 2.2 mm thick polyester cord. The pitch of the beads is 6mm. The roller tube is made up of high strength aluminium alloy extruded grooved tube. The load bar shall also be in aluminium alloys extrusiosion.

Providing & fixing of frosted films of approved quality 32micron in windows & partition in approved shade, texture & thickness in strips cut complete.

Seating Systems

Seating Systems (Chairs & Sofa seats) as per approvals.

Miscellaneous Items

Providing & installing CPU Trolly

Providing & fixing acralyc key board trays with LHS & RHS mouse pad with base surface in cushion canavas

Providing perforated powder coated dustbin of approved make and shade complete.

Providing and fitting Cabin, cubicle & Room signage plates as per details complete in brushed SS finish

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Windows Sliding/Openable

Windows Fixed

Ventilators With Exhaust fan, Glazing and Grill

Glazing

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Door Frame (Fixed)

Openable Shutter

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Toilets Fixtures: SITC of toilet fixtures complete as per specification and with necessary required ancillaries, accessories, fittings, consumables including all sundry materials etc. as per following items .

Toilet Fittings:

Toilet Accessories: Providing & fitting toilet accessories complete with necessary accessories/fittings etc. as per following:

Plumbing work: Providing, laying and fixing heavy duty UPVC SCH-80 pipes & Fittings with solvent weld socket joints and necessary (female Elbow fittings brass thread) such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps, Transition Bushing etc. including necessary jari work, back finishing, fixing with sadles & clamps, drilling holes in walls, slabs, beams hydraulic testing complete in all respects.

ITC of entire water supply system from existing source to the roof top storage and to the system by way of plumbing works in pipes & fittings with solvent weld socket joints and necessary (female Elbow fittings brass thread) such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps, Transition Bushing etc. including necessary trench work, jari work, back filling, finishing, fixing with sadles and clamps,drilling holes in walls, slabs, beams hydraulic testing etc. complete in all respects.

Sanitation Works: Providing fixing, testing and commissioning of SWR PVC PIPE TYPE-B (6 kg. cm. sq.) ring fit pipe comforming to IS:4985 including all fittings such as bends, junctions, inspection doors, offsets, cowl, access pieces/plugs etc. jointing with Solvent cement(lubricant) with O-Ring joints including cutting holes in walls and making good the same.

ITC of entire Sanitation & drainage system from toilets, balcony, roof tops to the end points / system by way of works in pipes & fittings with solvent weld socket joints and necessary sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps, Transition Bushing etc. including necessary trench work, jari work, back filling, finishing, fixing with sadles and clamps, drilling holes in walls, slabs, beams hydraulic testing etc. complete in all respects.

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Damp proof course with 25 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregates)

WATER TANK 500 LITRES Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

ROOF WATERPROOFING Providing and applying polyether based polyurethane (PU) waterproof coating consisting of 2 components (resin + hardener) in four coats consisting of a primer adhesion coat and three sealing coats applied by brush evenly to perfect level @ min.160 gm/sq.M per coat over R.C.C. slab including sprinkling the last coat of P.U. with a layer of clean sand (300 micron) and laying min. 50mm thk. PCC (1 cement :2 coarse sand :4 aggregate) over the fully cured coating in panels of max. 1.2M x 1.2M with 24 SWG chicken wiremesh finished smooth and sealing joints between panels with Polysulphide sealant as per approved manufacturers spec. and including preparing the base surface (levelling, cleaning, filling up cracks with thin paste of Polyurethane filling compound) providing fillets of 75mm radius with PCC (1 cement : 2 coarse sand : 4 aggregate) at junctions of horizontal and vertical surfaces, continuing the water proofing on vertical face to a minimum ht. of 150mm over finished roof surface, terminating it in continuous groove of 10mm x 20mm and filling with polyurethane sealent putty, continuing the treatment into rain water outlets by , providing 450mm x 450mm khuras at all outlets, levelled down by min. 25mm, finishing all complete. Cement supplied by the Contractor at their cost.

RAIN WATER DOWNTAKES 150mm dia O.D. Size. exposed PVC rain water pipe jointed with bonding solution of approved quality and make with pressure rating of 4kg/cm2 including clamps, connections etc. all as per approved manufacturer's details.

LEAN CONCREATE 1:3:6 In Super Structure ( For Terrace Roof Slope )

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Internal Wiring

Point Wiring (Mention/Confirm) Supply scope if any)

Power Points Supplying , Installing , Testing & Commissioning computer power supply point with 3 no of 6 amp 3 pin universal plug with 1 no 10 A Switch with indicator, wiring of computer point will be done through 2 nos.of 2.5 sq. mm Cu. wires as phase & Neutral and 1 nos. of 1.5 sq.mm.as earth wire. ( This cost excludes the wiring from DB to Computer point.)

MAINS and Conduit :

Supplying and Laying mains with 2 nos. of 4 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and 1 no 2.5 sq.mm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approved with all required necessary accessories. (Without pipe)

Supplying and Laying mains with 2 nos. of 2.5 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and 1 no 1.5 sq.mm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approved with all required necessary accessories. (Without pipe)

Supplying and Laying mains with 2 nos. of 6.0 sq mm Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V and 1 no 4.0 sq.mm Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in 25 mm diameter rigid PVC conduit of medium gauge having ISI and FIA approved with all required necessary accessories. (Without pipe)

Supplying and Laying of power cable including lugs and glands and all sundry materials.

Providing and erecting 1.5 mm thick FIA approved and ISI mark (embossed) MMS RIGID PVC PIPES of following size complete erected with necessary PVC fittings and Junction boxes fixed with adhesive solution and Clamps in concealed manner in wall/slab along with continuous fish wire to draw mains, laid in approved manner with complete plastering by cement mortar & finishing the surface to match the wall/ceiling.

Extra Metal junction box with 4 to 6 nos.X25 mm opening from all sides laid in flooring & on wall.

Supplying, erecting, testing and commissioning of electrical panel suitable for the load requirements & distribution as per the entire electrical scope of works with incomer and outgoing power distribution switches. The panel to operate in fully auto mode with electrictronic systems and display. The scope to include making nacessary shop fabrication drawing to get it duly approved by consultants as per requirements(The panels shall be Top entry)

Light Fixtures & Fans: Supply, Installation, Testing , assembling, connection of fixtures complete with all the required drilling, welding, cutting, etc. to install the lighting fixtures on M.S structural member of the link bridge. Including all the hardwares, clamps, suspending chains, pipes, suspension rod & hooks, mounting down rod / bracket / Circular steel ring / steel wire and hook. All work should be done as per specification and IS. Connection of all parts, fixing/mounting of fixture as required to complete the job satisfactorily.

SITC of 18W recess mounted down light fitting with all accessories complete.

SITC of 18W bracket mounted decorative light fitting with all accessories complete.

SITC of 28W LED tube light fitting surface/wall mounted with all accessories complete.

SITC of 36W LED 600X600 fitting in modular recessed mounted fixture.

SITC of ceiling fan with necessory pipe extension, Hooks etc. complete in all respects.

Supply, Installation, Testing and commissioning of louvered Exhaust Fans with complete details in all respects.

Supply , Installation , testing and commissioning of GI Earth electrodes & Cu plate type earth electrode complete with earth pit including excavation of earth pit , filling with charcol and salt , back filling, brick work ,pit cover, Lightning rod/spike/hollow sphire and all necessary civil work,connections including all labour and materials as approved drawing and specification & IS 3043 & IS 2309 of this tender and direction of OWNER / CONSULTANT.

GI Earth Electrodes

Cu plate Earth Pit

Earth strip and wire

50x 6 mm GI Flat strip

25 x 3 mm Cu Flat strip

26 x 6 mm GI Flat strip

Single core stranded 2.5 Sqmm Cu green earthing wire

300mm long 25x6 copper earth busbar

25mm dia 1500mm long GI rod for lightning protection

25x6mm GI strip for building roof & down conductor for lightning protection

200 x 200 x6 mm MS plate

Supply and Installation of Hardware and other accessories including all labours and materials and directions of OWNER / CONSULTANT.

Rubber Mat

CAUTION Board

Sock treatment chart

Aluminium tags for Cable

Electrical hand gloves

Cable route marker as per Standard drawing TE-IN-STD-G-0327

Ladder type Cable tray - Galvanized steel fabricated out of hot rolled sheet steel with rigid welded ladder type 450 mm wide straight run

Ladder type Cable tray - Galvanized steel fabricated out of hot rolled sheet steel with rigid welded ladder type 300 mm wide straight run

Modification in existing panel tapping from incomer breaker as per SLD & SOW.

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Telephone Distribution

SITC of specified make Cat 6 UTP cable 4 pair data wire of specified make to be drawn in PVC pipe of 25 mm dia of specified make / Race way, with the cost of pipe included. (the wire is to be drawn from EPBX of respective area to terminal point).

Telephone Outlet Point: SITC of specified make outlet point in following modules

Data Distribution:

Supply and laying of specified make Cat 6 UTP cable 4 pair data wire of specified make to be done in PVC pipe of 25 mm dia of specified make / Race way, with the cost of pipe included . ( the wire is to be drawn from LAN switch of respective area to outlet point).

Data Outlet Point: Supplying, installing of the specified make suitable for Data outlet socket RJ 45 (jack type).

HDMI cable for conference room

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Airconditioning Units(5 star Inverter AC with gas R410 or better): SITC of following tonnage Split AC Unit at site including epoxy coated metal stands and brackets etc. with anchor fastners etc. complete and all including intial gas charging & filling considering extra length pipes, testing, commissioning etc. complete in normal working conditions. The work is including all civil & jari making/filling, PUF insulation in holes' work complete. The units to carry standard guarantee/warrenty clauses as per brands' standard policy prevailing at the time of installation.

Extra length copper Pipes: SITC of extra length copper Pipes suitable for following tonnage AC units in all respects.

AC Drainage systems: SITC of UPVC drain pipes for AC units above including all accessories and sadeling in slab, wall etc. complete in all respects. The work is including all civil & jari making/filling, armour ,PUF insulation in holes' work complete.

Tender no.: GTL/PROC/2026/04/O/486

(n)Procure Tender ID: 307720

(Amount in INR excl. GST)

Item Description of Goods/Services

Fire Alarm System ( As per existing unit): SITC of following jobs and Items complete in all respect as per IS standards and specifications.

Cabling (As per existing unit)

Tender no.: GTL/PROC/2026/04/O/486 (n)Procure Tender ID: 307720

Bid Reference

Clause No.

Section-II

Queries must be submitted in this format only through e-mail on GTL's contact details before deadline of query submission date as provided in RFP/ Amendments/ updated during pre-bid meeting.