Supply and Installation of 27 Nos. of 6 Mtr Designer pole with 60W LED Street Lights at Thiruvilwamala Town in Thiruvilwamala Grama Panchayath, Thrissur District under Annual Project 2025-26, Project No. 103

CIVIL WORKS

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)

5.9.1 Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete

5.22.6 , placing Treated Steel reinforcement for R.C.C work including straightening, cutting, bending in position and binding all complete upto plinth levelThermo - Mechanically bars of grade Fe-500D or more

5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

13.1.1 12 mm cement plaster of mix: 1:4 ( 1 cement: 4 fine sand)

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. deposited

OD180082/2025-2026 Fabrication, supply, conveyance & installation of Granite name board indicating the cost involved, the commencement, completion and inauguration date etc

ELECTRICAL WORKS

OD180189/2025-2026 Supply installation testing and commissioning of 6 meter designer pole shaft made of hot rolled M.S pipe confirming to BS EN IS 1239 part 1:2004 steel tubes, foundation bolt 4 nos existing RCC foundation hot dip galvanized and PU/Epoxy/enamel finish, for base pl. & foundation bolt - as per is 2062:2011, GrE 250A must be hot dip galvanized as per IS 1239 part 1:2004 steel tubes, base plate dimensions of 220x220x12mm, Tolerance As Per BS 5649-2, EN 40-2 and suitable for wind speed as per is 875 part iii.

OD180230/2025-2026 Supply Conveyance, installation, testing and commissioning of 60W LED street light output greater than 100lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 5 KV, with Optic lense materal (UV Stabilised) write NA for without optic lens supply), power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be separately accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD180237/2025-2026 Supply and installation of AB Cable Voltage Grade: 0.6/1kVoutdoor usable Conductor Material: Aluminum (AAC) for phase and streetlight conductors.Neutral/Messenger Wire Material: Aluminum Alloy (AAAC).

OD180234/2025-2026 Supply and installation of ABC Suspension Clamp for Suspend LV ABC messenger conductors. 16mm² to 95mm², some up to 120mm². Material: UV and weather-resistant, high-strength engineering plastic (body/movable link), or aluminum alloy/galvanized steel.

OD205484/2025-2026 Supply and installation of LT Anchor Clamp (Cable size/conductor diameter: 16to - 120 sq mm) or messenger wire sizes (8.6-10.9 mm, 12.3-13.6 mm, 12.3-13.6(15.0) mm) the clamp is designed to accommodate Anchor clamps are manufactured from UV and weather-resistant engineering plastic, according to Axis Electricals, or high-strength aluminum alloy.

OD206197/2025-2026 Supply and installation of Insulation Piercing Connector (IPC) conductor size ranges (e.g., 2595 mm2 main to 416 mm2 tap) and conductor material compatibility (e.g., Al/Cu dual-rated), which must match the cables in the design. IPCs typically feature an insulated body and an integrated shear-head bolt that breaks off at a predetermined torque, guaranteeing proper contact pressure and ensuring a low-resistance, long-lasting connection.

OD180265/2025-2026 Supply and installation of dust and vermin proof, outdoor single Phase Polycarbonate/ FRP/PVC/UPVC Meter Box suitable to install KSEB meter, fuse units etc., as required and including fixing it on Wall/ Angle iron Frame, making good, without the damages color washing etc., as required. (Size 400×300×190)[cites​tart] box

90.14.5 Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

OD180087/2025-2026 Supply and installation of a Digital timer, operating at 220-250 VAC, 50Hz, with a 25A/1.5HP capacity. It features 5 On/Off program settings for daily and weekly schedules, along with manual start, ON delay, and OFF delay settings. Equipped with a high-precision, industrial -grade chip and strong anti-interference capabilities, the timer can automatically turn on and off the power supply of various electrical equipment according to the time set by the user. The controlled objects can include street lights, light boxes, neon lights, and high/mini mast systems. It also includes a sufficient battery backup for time memory in case of power failure, and comes with suitable fittings for use in a distribution box or MV panel with FRLS PVC insulated .5 mm single core cable suitable for control wiring towards contactor

OD180088/2025-2026 Supply and installation of a double pole 25A Contactor, rated for 220-250 VAC, 50Hz operation. It can control street lights, light boxes, neon lights, high/mini mast systems, and induction loads.

OD180086/2025-2026 Supply and fixing HRC fuse base of 32 A using suitable nut and bolt, 32 A 2- way neutral links mounted on DMC/SMC base.

2.14.2 Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

2.10.3 Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

2.10.1 Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.12.1 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

OD205549/2025-2026 Supply and installation of an IP20 Surge Protective Device (SPD) with suitable fittings for a distribution box or MV panel. Specifications include: Voltage Protection Level (Up), Nominal Voltage: 230V, UOC: 10kV, L-N: 7kV, L-PE: 7kV, N-PE: 7kV, Nominal Discharge Current (8/20$\mus):10kA,TotalDischargeCurrent(8/20\mu$s): 60kA, Response Time: <35 ns, Ambient Temperature (Ta): -10 to 55°C.

OD180089/2025-2026 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. 2.5 sq. mm

OD205512/2025-2026 Supply and installation of 2.5 Sqmm non-insulated CP-1 pin terminals with suitable size heat shrink

OD180281/2025-2026 Earthing with G.I. earth pipe 1.5 metre long, 40 mm dia including accessories. (but without charcoal/ coke and salt) as required.

90.16.1.3 Supply and drawing bare earthing conductors of the following sizes along with wiring/cables and giving connection as required3.15 mm copper conductor (10 SWG)

90.16.5.3 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

Lumsum Heading

Connection charges - KSEB

Please Enable Macros to View BoQ information