REPAIR REPLACEMENT OF EM FITTING FIXTURES AND REPAIR REPLACEMENT OF SUB MAIN OF OTM BLDGS AND REPAIR AND MAINTENANCE TO GEYSERS AND SOLAR WATER HEATER UNDER GE ARMY CENTRAL IN ARMY AREA JODHPUR (8985/E8)

Amount

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete

Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing complete all as specified and as directed.

Point wiring (Concealed) using approved colour coding as per IS Red Black and green for single phase circuits) with multi stranded copper conductor 1.5 Sqmm nominal cross area single core PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI 694 marked with valid CML No. in and including medium grade PVC concealed conduit of dia not less than 20mm and conduit accessories ISI marked with valid CML No. ( IS 9537 -1983 for wall/roof /floor etc with pressed flush metal boxes covered with inner plates & outer plates etc suitable for mounting of Modular switches & sockets including PVC insulated multi stranded copper conductor FRLS 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continully conductor to commonearth and connecting to earrth dolly complete all as specified and as directed for the follwing (a) One light point controlled by one, one way switch

(b) One fan /Exhaust fan, point controlled by one way switch.

(c) One socket outlet 3 pin 6 Amps on same board

(d) One socket outlet 3 pin 6 Amp on independent board

(e) One bell point controlled by one bell push.

(f) One light point controlled by two, two-way switches

M & L for point wiring (surface) complete with FR PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in PVC Caping/Casing of size 20x12 to 25x16, ISI marked, 19/20 mm dia including all accessories and making good the disturbed surface, with and including suitable modular boxes surface type of make legrand ,switch plates of make Legrand and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed by Engr-in-charge. Make of cable : Polycab, Finolex ,Havells(a) One light point controlled by one switch.

(b) One ceiling/exhaust fan point controlled by one switch.

(c) One 3 pin socket outlet 6 amps on independent board.

All as per item No 9 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .

S&F Modular switch flush type single pole one way 5 Amp ISI Marked. Make : Legrand ( Myrius)/ABB/ANCHOR (ROMA)

S&F Modular switch flush type single pole one way 15 Amp ISI Marked.. Make : Legrand ( Myrius)/ABB/ANCHOR (ROMA)

supply &Fix Modular switch flush type single pole two way 5 Amp ISI Marked. Make : Legrand ( Myrius)/ABB/ANCHOR (ROMA)

supply & Fix only Modular bell push, flush type, 5 Amp ISI Marked . Make : Legrand ( Myrius)/ABB/ANCHOR (ROMA).

Supply and fix bell, AC 230 volts, single pole Multi tune type . Make : Havells/Anchor

S&F Modular socket outlet 2 in 1, 5 pin, 5 Amp flush type ..Make : Legrand ( Myrius)/ABB/ANCHOR (ROMA)

S&F Modular socket outlet 2 in 1, 6 pin, 5 and 15 amp flush type ISI Marked..Make : Legrand (Myrius)/ABB/ANCHOR (ROMA)

Supply and fix modular socketed stepped type electonic fan regulator flush type ,complete all as specified and as directed.

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body,complete all as specified and as directed.

S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 9 watt LED Lamps ISI Marked.,complete all as specified and as directed.

Refiixing only LED tube light 20 watt

S&F LED tube light fitting Box type 20 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable Make :Crompton Fitting Cat No-DMLN1LTD8-16 & LED Lamp Cat No-LTT8-20 or equivalent in Havells Cat No LHEXBHP7PN1W020 /philips Cat part No-BN150W LED20S complete all as specified.

S & F Surface mounting LED Luminaries and 1 x 9 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed . Make : CG, Phillips, Wipro

Supply and Fixing LED bulk head light 8/10 watt, including taking down u/s fitting any type Make : Havelles/Philips/Bajaj

Supply & fixing 2'x2' LED flat panel (recess type)suitable for armstrong/grid/POP ceiling complete with separate electronic driver & high brightness diffused type complete all as specified. Make : CG, Phillips, Wipro (CG Model No :- LBRP40CL22CD) or Equivalent

S & F LED security light fitting 25 Watt made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V of- Note :(i) Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect complete all as specified and as directed. make : CG Cat Part No. LSTS-25-CDL :

M & L for sub main wiring (concealed) complete with four single core 10 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 to 32 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 10 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Make of cable : Polycab, Finolex,Havells Note: 5 run of 10 sqmm & one run of PVC conduit shall be measured as single unit

M & L for sub main wiring (concealed) complete with four single core 6 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Make of cable : Polycab, Finolex,Havells Note: 5 run of 6 sqmm&one run of PVC conduit shall be measured as single unit

M & L in repairs sub main wiring with 6.00 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through PVC concealed conduit and making good the distrurbed surface of wall inc 6 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 6 Sqmm shall be measured as unit length.

M & L in repairs sub main wiring with 4 Sq mm single core multistrandred copper conductor PVC insulated (FR ) and unsheathed cable passing through in and including PVC conduit medium grade compleate with all acessories concealed in wall and making good the distrurbed surface of wall incl 4 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 4 Sqmm and one run of conduit shall be measured as unit length.

Supply and fixing of sheet metal enclosure SPN with a two pin earth plug and socket with metal cladd top and one MCB,SP 20amps capacity complete all as specified & directed.

S & F power unit for upto 2 ton AC and geyser up to 3.5 KW modular type , 4 module,240 volts all as specified and as directed by EIC. Make : Legrand Cat No. 675558

S & F sheet metal enclosures for DB V-TPN for incorporating MCCB 100 to 160 Amp as incoming & MCBs, TP, 4 way as outgoing, IP-54 with metal double door with 200 amps rated busbar, 415 volts, as per IS-8623 including taking down the old unserviceable TPN DB, all as specified and as directed. Make : Legrand Cat No 507750, ABB,Seimens.

S & F sheet metal enclosures for DB V-TPN for incorporating MCB 100 Amp as incoming & MCBs, TP, 6 way as outgoing, IP-54 with metal double door with 100 amps rated busbar, 415 volts, as per IS-8623 including taking down the old unserviceable TPN DB, all as specified and as directed. Make : Legrand Cat No 507736/ ABB/Seimens.

S&F Prewired distribution board in sheet metal encl , prewired when MCB to be used with 200 Amps rated copper bus bar confirming to relevant IS SPN 12 way , cat no. - SD 3707 , make: LEGRAND/ ABB/Seimens.

S&F distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.Make;-Legrand/ABB/Havell's

S&F Prewired distribution board in sheet metal Prewired when MCB to be used with 200 Amps rated copper bus bar Confirming to relevant IS TPN 4 way, Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.Make;-Legrand/ABB/Havell's

S & F MCB SP 10-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand or equivalent in ABB,Seimens

S & F MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408617 /ABB/Seimens

S & F MCB SPN, 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408617 /ABB/Seimens

S & F MCB TPN, 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408704 /ABB/Seimens

S & F RCCB DP 63 Amps, breaking capacity 30 mA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408704 /ABB/Seimens

M & L for disconnecting electric supply, taking down fan, dismantling blades carefully after unscrewing nuts and bolts of ceiling fan, exhaust fan of any make from existing position and bringing to AGE E/M store yard for repairs, overhauling, oiling, greasing and cleaning all dusts and rehanging in position and connecting up electrically including minor items like split pins complete all as specified and as directed by EIC. Note: Complaint slip regarding the fan should be obtained from concerned JE (E/M) of AGE E/M office every day and completion on the complaint must be intimated to concerned JE (E/M) after rectification every day. Rewinding work and replacement of spares shall be measured and paid separately under appropriate items. No supporting materials, tools and plants shall be issued by MES to contractor.

Supply and fixing Ceiling fan 1200 mm sweep , 5 starrated and necessary electric connection all as directed by engineer-in-charge.Make:Bajaj/crompton/Havell's

Supply and fixing Exhaust fan 300 mm , sweep , Noise less, and necessary electric connection all as directed by engineer-in-charge.Make:Bajaj/crompton/Havell's

Supply and fixing Exhaust fan 250 mm , sweep , Noise less, and necessary electric connection all as directed by engineer-in-charge.Make:Bajaj/crompton/Havell's

Taking down and re fixing of exhaust fan repair work and making connection all as specified and directed.

Supply and fixing MCCB 160 Amps 25 KA including sheet metal enclosure powder coated finish and fixed flush in wall including making good to distrubed surface etc complete.

Supply and fixing Sheet metal Busbar chamber factory fabricated powder coated finish complete with copper busbar TPN 125 Amps including fixing arrangement etc complete

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.

Taking down of defective geyser of any capacity from site transportation to E/M store yard for repair, strip opening for complete overhauling and ascertaining the repair/replacement (spare part shall be measured and paid seperately under respective items) & re-assembling the geyser after repair/replacement and including connect with existing electric & water connection, testng complete all as specified and directed

Disconnecting of electric and water supply connection of geyser for supply and replacement of brass chromium in-door assembly(shyphon assy) 6/9 hole for 50 Ltrs Geyser including connect with existing connections and testing complete

ditto- all as per srl item No 54 here in-above but for 25 ltrs Geyser

M&L for taking down and replacement of 15 mm bore GI tubing medium grade with and including all new fittings Make : TATA/JINDAL./PRAKASH SURYA (ISI Marked) ( Note : Rates shall deemed to be included for making holes/nitch, cutting chases for replacement of pipe and making good distrubed surface to match with existing surface and finish all as directed.

M&L for replacement in repairs fancy type Bib tap 15mm bore cast copper alloy high pressure,screwed for iron pipe. Make : JAGUAR/MARC/Cera

M&L for replacement in repairs fancy type stop valves 15mm bore cast copper alloy high pressure, both ends screwed. Make : JAGUAR/MARC/Cera

Supply and replacement of PVC connection heavy duty, nylon braided, suitable for hot water, with brass alloy chromium plated nuts and nylon washers complete of size15mm bore and 450 mms long all as directed

ditto- all as per srl item No 59 here in-above but for 600mm long.

Supply and replacement of CP copper pipe, suitable for hot water, with brass alloy chromium plated nuts and nylon washers complete of size15mm bore and x 45cms long all as directed

Supply and replacement of CP copper pipe, suitable for hot water, with brass alloy chromium plated nuts and nylon washers complete of size15mm bore and x 60 cms long all as directed

Supply and replacement of and connect PVC insulated and sheathed 1100 Volts grade flexible three core insulated and sheathed multistranded copper conductor cable of size 40/.0076mm Make : PLAZA/FINOLEX/NICCO/NATIONAL

Supply and replacement of in repairs SP metal clad plug outlet with sheet metal enclosure complete with plug top and MCB SPN-20 Amp Make : LEGRAND/ABB/HPL

Supply and replacement of heating element (ISI Marked) of suitable type as per existing including rubber ring clamping screws etc complete of 1.5KW Make : BAJAJ/VENUS/THEETA

ditto- all as per srl item No 65 here-in-above but 2.00 KW

Supply and replacement of thermostat ISI marked for geyser as per existing of range 15-65 degree temperature

Supply and replacement of steel vessel (tank)of geyser capacity 25 ltrs as per existing type of all as specified directed by EIC.

ditto- all as per srl item No 68 here-in-above but capacity 50 ltrs.

Supply and replacement of vacuum safety valve of suitable size on inlet side of geyser

Supply and replacement of brass chromium plated horizontal/vertical non return valve of size 15mm bore (ISI Marked) on inlet side of Geyser.

Supply and replacement of pressure release valve of size 15mm bore complete all as specified.

Supply and replacement of brass nut fusible plug suitable for Geysers.

M&L for drilling hole in wall, grouting fastner nut and bolt not less than 100 mm long for holding geyser upto 50 ltrs in wall including making good and matching existing surface and finish all as directed.

Supply and replacement of indicating lamp of red and green colour, for Geysers including connecting all as specified .

Supply and replacement of bottom split inspection cover for geyser capacity . - 25 ltrs. of any make all as specified .

Supply and replacement of bottom split inspection cover for geyser capacity - 50 ltrs. of any make all as specified .

Supply and replacement of outer body made of ms/ss sheet for geyser capacity . - 25 ltrs. of any make all as specified .

Supply and replacement of outer body made of ms/ss sheet for geyser capacity - 50 ltrs. of any make all as specified .

Supply & replaced Rubber Gasket as per site requirement for 25/50 ltr geyser.

M & L for scrapping old paint and applying spray painting one coat of synthetic enameled paint of approved quality including writing MES No. / building no. in letters of size 40 mm width. For geyser cap. - 25 ltrs of any make/type . (NOTE : Rates shall deemed to be included for taking down Geyser in location and position , disconnecting and reconnecting electrical / water connection all as directed)

M & L for scrapping old paint and applying spray painting one coat of synthetic enamelled paint of approved quality including writing MES No/ building no. in letters of size 40 mm width. For geyser cap. - 50 ltrs of any make./type . (NOTE : Rates shall deemed to be included for taking down geyser in location and position , disconnecting and reconnecting electrical / water connection all as directed)

M&L for replacement of GLASS WOOL in repairs for Geysers of any capacity.

Supply and replacement of MCB SP 20 Amp, 10KA,f Make :- Legrand/ABB/HPL.

Supply and replacement of three pin top 16/15 Amp. MAKE : ANCHOR/HavellsLEGRAND.

Supply and replacement of metal clad plug socket 3 pin 16/15 Amp. MAKE : ANCHOR/HavellsLEGRAND.

Supply and replace FT socket three pin 16/15 Amp.MAKE : ANCHOR/HavellsLEGRAND

Supply and replace FT switch 16/15 Amp. MAKE : ANCHOR/HavellsLEGRAND

M&L for welding/brazing steel/copper vessel ( storage water tank of capacity 25/50 ltrs ) including pressure testing and leakage testing complete.

Dismantling electric and water connection of the geyser, taking down from its position on ground, dismantling geyser complete such as removing tank from its outer body , removing apparatus plate from the tank, descaling the geyser inner tank and apparatus plate complete, testing its thermostate, element , and tank from leakage, reassembling the geyser, replacement of unserviceable parts such as heating element, thermostat, indication lamp, plug top , three core wire, rubber gasket, inner tank, split plate, outer bottom cover, apparatus plate if required (Spares will be paid under relevant item of the Sch) testing the geyser and installation of the geyser into its original position and connecting all electric and water supply connection complete all as directed by Engineer-in-Charge of capacity 50 liters.Note : Complaint attend Day to Day as well as required bases.

M & L for cheking of 1x100/200/500LPD Capacity Solar water heater system installed at ARMY AREA Jodhpur.

De-scaling & servicing of 1x100LPD Solar Water Heater system including re-insulation and making fit for smoth function,complete all as specified.

M & L for heating element of cap 3/5 KW ISI Mark as per existing panel length & width complete all as specified.

M & L for thermo state ISI Mark Suitable for existing panel complete all as specified.

S&F in replacement driver for security/ surface / recess mounted LED downlighter any type and wattage complete all as specified and directed.

M & L for Repair to damaged panel tubing with gas welding

M & L for Providing accessories such as nuts,bolts rubber angle iron piece with welding other clading etc.

S & F LED strip for indoor & outdoor with driver 5mtr in lenght complete all as specified & directed. Cat Ref no- LST65RGB Make -Crompton.

Supply and lay GI/MS pipes heavy grade 20mm dia with all fittings complete all as specified.laid in

Dismantling and taking down unserviceable pressure pumps and motor of cap not more than 2 HP of any capacity and description and refixing to the position after servicing and minor repairs as refilling of pressure replacement of auto cut switch etc the job include rewinding of motor

M & L for rotational moulded polythylene water storage tank 100 Ltr cap triple layer with hoisted and fixed in position all as specefied. Make Sintex/Rotex/Polytuff

M&L sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistaranded of size 4 Sq.mm. (nominal area) drawing in and including 20 mm. dia PVC concealed conduit and conduit accessories and fittings. Including one single core green colour PVC. Insulated unsheathed cable aluminium conductor multistranded of size 2.5 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed including taking down old one .

M&L for attending daily complaints in repairs and maintenance of geysers, fans, Solar water heater lodged by the users complete to make serviceable condition with skilled electrician (Geyser, Fans, Solar Water Heater) at Mathura Cantt and obtaining signature from users all as directed at site by Engr-in-Charge. Note:- (a) The minor complaints (non functioning of geyser, replacement of thermostat, indicators, flexible wire, bib cock, stop cock, PVC connections, plug top, MCB, Socket) should be competed with in 24 hrs by deploying required manpower. (b) Major complaints like leakage of tank, relocation of geyser, glass wool replacement, and major assembly replacement should be completed with in 48 hrs (c) The rates quoted for the item shall be deemed to include the cost of labour for replacement of any stores whenever required. The materials will be measured and paid as `Supply only' under relevant items of this schedule.

Supply only plug Top 20 Amps Make : Anchor/ Havels/ Legrand

Supply only PVC insulated copper conductor 1100 volts grade circular cable of size 2.5 sqmm (50/.025) 3 core complete.

Supply only socket 03 pin 16 Amps complete all as specified and directed. Make : Anchor/ Havels/ Legrand

Supply only switch flush type single pole, one way 16 amp polycorbonate body Make Anchor/Leader or equivalent

Supply only Stop Cock CP brass 15 mm bore screwed down with crutch or butterfly handle complete all as specified and directed.

Supply only bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm- 90gms/20mm- 125gms) of Size 15mm complete all as specified and directed.

Supply only PVC Connections with steel reinforced for hot and cold water circulation 300mm long with nuts and washers of size 15mm dia complete all as specified and directed.

M&L for Laying of GI tubing med grade on floors/walls/roof including all necessory fittings of size 15mm dia complete all as specified and directed.

M&L for insulation of GI Pipe with PUF slab 30mm thick with and including applying bituminus compound and GI Cladding with GI Sheet complete of Size 20 mm dia complete all as specified and directed.

M&L for Laying of GI tubing med grade on floors/walls/roof including all necessory fittings of size 20mm dia complete all as specified and directed.

M&L for Laying of CPVC as per IS:15778 tubing SDR11 on floors/walls/roof including all necessory fittings of size 25mm dia complete all as specified and directed.

S&F male Brass threaded adopter 20mm dia complete all as specified and directed.

M&L for replacement of assembly bottom cover (Inspection cover) split type made of iron sheet duly painted with two coats of synthetic enemel paint over one of red oxide primer.

M&L for replacement of bottom cover for outer body made out of MS sheet of same guage and size duly painted with two coats of synthetic enamel paint of existing geyser colour over one coat of red-oxide primer all as directed.

M&L for Angle Iron 25x25x4mm supporting for Solar panel including cutting, grouting, painting all as specified. Fe 410 -W Gde- E- 250) quality- A

M&L for mass cement concrete 1:2:4 type using 40mm aggregate for fixing of stands of solar plates, hot water tank etc

M & L for replacement of Solar Evacuated Tube Collector for 100 litre capacity and fixing new Solar plate with all new steel nut bolts of suitable size, replacement of gasket of all flange joints, replacement of hot water to Hot water tank all as specified.

M & L for replacement of Solar Flat Plate Collector 100 litre capacity and fixing new Solar plate with all new steel nut bolts of suitable size, replacement of gasket of all flange joints, replacement of hot water to Hot water tank all as specified.

M & L for replacement of Solar Flat Plate Collector 200 litre capacity and fixing new Solar plate with all new steel nut bolts of suitable size, replacement of gasket of all flange joints, replacement of hot water to Hot water tank all as specified.

M & L for replacement of Solar Plate Evacuated Tube Collector 200 litre capacity and fixing new Solar plate with all new steel nut bolts of suitable size, replacement of gasket of all flange joints, replacement of hot water to Hot water tank all as specified.

M & L for replacement of Solar Flat Plate Collector 300 litre capacity and fixing new Solar plate with all new steel nut bolts of suitable size, replacement of gasket of all flange joints, replacement of hot water to Hot water tank all as specified.

Supply and fixing heating element 3.0 KW single phase for Sollar Water Heater

M&L for taking out and refixing split type ACs any cap/Make from one location to another location including pressurising the system ,testing and leakage rectification in system , making good disturbed surfaces and testing all as directed by Engr-in-Charge. Note :- Rates are deemed to included for making holes for suction , discharge pipe and condensed water pipe (ii ) extra lenth of copper pipe duly insulated and gas if required shall be paid seperately .

Material and labour for replacement of copper discharge tube of size 3/8" duly nylon insulated all as specified by Engineer -in-Charge.

Material and labour for replacement of copper suction tube of size 5/8" duly nylon insulated all as specified by Engineer -in-Charge.

Supply and fixing blower motor of indoor unit for 1.5 TON/2.0 Ton cap split type AC (Make Blue star/Voltas complete as per sample) as in replacement.

Supply and replace auxillary supply PCB for indoor unit of split type Acs 1.5/2.0TON capacity of any make and model as oer sample.

Supply and replace auxillary supplyt PCB of single Phase AC of any cap and make all as directed by Engineer -IN-Charge.

Supply and fix heavy duty bracket powder coated suitable for out door unit split Acs , including steel fastner - 4 Nos. all as directed

M&L for providing nylon insulation on discharge and suction pipe of split unit ACs in existing location and position including . NOTE: Rates are deemed to be measured as single length for one suction and discharge .

Supply and replace single phase contactor for outdoor unit of split type Acs any capacity (!.5/2 TR) / make

Supply only refrigerant gas M- 400/444/R22/R32, Make:Maffron/Floron ( Note : (i) The gas is to be supplied in cylinder duly sealed by manufacturer/ factory sealed with proper PVs and other documents .

Material and labour for replacement of PVC condensed water drain pipe 15 mm dia for split type AC complete including providing saddle with clamping arrangement all as directed by Engr-in-Charge and

Supply and replacing single pole and neutral enclosure with 2 pin earth plug ad socket complete with one MCB SP 25 Amps (Make -Legrand/Havells) as in replacement.

Note for all above items:-All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old items" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

Nikhat nirman

Nvimal Engineers and Contractor