Shifting of old oil pit and construction of new oil pit and other associated work at Workshop-Bareilly

Amount

Digging of pit, construction & Fixing of M.S. oil Tank of Size 6'X6'X4’ underground by making proper foundation by CC & making cover in two parts using M.S. Channel 50 X 50 X 5mm MS Angle 50X50X5 mm, M.S. Strip 25X5 mm, M.S. Sieve of size 4mm etc. Complete. Making partition vertically in ratio 1:2 by using vertical frame heavy wire mesh & fibber filters of size 1 mm hole for cleaning the oil. The Contractor will also fill the old oil pit dig by sand.

Construction of CC Platform on all four sides of pit having width of 10' by casting CC in the ratio of 1:2:4 having thickness of 4" and PCC in the ratio 1:5:10 having thickness of 3" in the shape of "O" for natural collection of oil in the pit & fixing with M.S. channel outside the floor. Contractor has to provide M.S. Plate 04 mm thickness all around the pit. The Contractor will also fill the old oil pit dig area by CC plateform of 4" thickness.

Making Arrangement for cleaning of core assembly by providing high pressure JET pump in pit area with pipe & other accessories

Supply and Installation of Heavy duty Mono Block T/F pump rating 2 HP Single Phase

Supply and installation of pipe lines using heavy duty C class pipe along with valves and T joint connector, L-bow etc. And dagging of Nail (15cm wide and 30cm deep) on the floor/wall (30cm wide and 15 cm deep) for laying of pipe line and filling the Nail back by CC ratio 1:2 complete jobs.

(I) 40 mm thick G.I. pipe conforming to IS 1239 pat-1 (2004) (OD-48.3 mm)

(II) Brass Valves 40 mm (Gate Type) confirming to IS 1239

(III) T Connector 40 mm of G.I. confirming to IS 1239 part-1 (2004)

(IV) L- bow of 40 mm G.I. confirming to IS 1239 part-1(2004)

Electrical control panel for operation of Motor with appropriate size Cu. Cables, Switches, Indicators complete in all respect confirming to ISS.

M/S HONEY ENTERPRISES

R.D. ENTERPRISES