Rajya yojna ke antargat janpad pauri garhwal ke vidhansabha chetra pauri ke vikashkhand pabo ke antargat simtoli sampark marg ka punah nirman awam sudhar karya

Amount

Excavation in hill side cutting in all type of soil and rock which may be met at site for making the road as per plan and L-section with reference to level and back cutting pillars fixed at site including all leads & lift and disposal of excavated materials and also including jungles clearance and uprooting of trees complete and also including supply of all materials labour and T&P etc. required for proper completion of the work as per direction of Engineer-in-Charge.and Loading .unloading of earth ,sand, Moorum , Manure Flyash by mechnical means including a lead upto 30 m ( placing tipper at loading point, leading with front end loader) including Haulage of material by tipper in kachcha track and track in river bed/ nallah bed and choe bed.

Making superelevation with lowering in half width & filling in remaining half width with coolie walling including supply of all material,labour,T&P etc required for proper completion of work

lowering

filling

coolie walling

WBM Grading 1 Providing, laying, spreading and compacting stone aggregates of specific sizesto water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 1 as per Technical Sp.[Grading of no-1] (45-90 mm size).

Patri filling with Local Soil with coolie walling after laying of soling coat including supply of all material, labour and T&P etc. required for proper completion of the work.

coolie walling

WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.[Grading of no-2] (45-63 mm size).

Patri filling with Local Soil with coolie walling after laying of inter coat including supply of all material, labour and T&P etc. required for proper completion of the work.

coolie walling

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizesto water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Sp.[Grading of no-3] (22.4 - 53 mm size).

Patri filling with Local Soil with coolie walling after laying of top coat including supply of all material, labour and T&P etc. required for proper completion of the work.

coolie walling

2 cm thick premix carpet in 3.75 m width.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.90 kg/sqm using mechanical means for medium porosity.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.

Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 510 Case - II : Type B

Construction of unlined surface drains of average cross-sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307. Manual Means

Retaining Wall/Breast wall

Excavation in foundation for retaining & brest wall in all types of soils and rocks including all lead & lift and disposal of surplus material as per direction of Engineer-in-charge.

Random Rubble Masonary laid dry in breast wall,retaining wall including supply of all materials,labour and T&P, royality etc,required for proper complition of work.(As per PWD Uttarakhand specifications)

H.P stone filling in back of wallls including cost of all materials ,royality.t&p etc. complete.

Construction of Scupper

Excavation in foundation for retaining & breast walls in all types of soils and rocks including lead, lift and disposal of surplus materialas per direction of engineer - in - charge

PCC 1:3:6 in Foundation Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806,807, 1202 ans 1204 R.C.C grade M 25

Random rubble masonry In 1:5 cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204. Random rubble masonry In cement mortar (1:5)

Supplying, fitting and placing HYSD bar reinforcement in foundation /sub structure /superstructurecomplete as tonne per drawings and technical specifications Clauses 1000 and 1202 . (The reinforcement steel shall be procured from original (primary) steel producers as per clause no. 2011.3.1 of MORD specifications (First Revision'2014) and IS 1786:2008 clause no. 1.6) including supply of all material labour t&p. 1. SAIL (Steel Authority of India Ltd.) 2. RINL (Rashtriya Ispaat Nigam Ltd.) 3. Tata Steel 4. Shyam Steel Industries Ltd.

H.P stone filling in back of wallls including cost of all materials ,royality.t&p etc. complete.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications

Construction of Parapet

Excavation in foundation for retaining & brest wall in all types of soils and rocks including all lead & lift and disposal of surplus material as per direction of Engineer-in-charge.

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203P.C.C grade M 10Nominal mix 1:3:6

Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 of MORD Specifiction

White washing of parapet walls of CD work and tree truncks White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915

Miscellaneous item such as edge stones, view points,

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703

Reinforced cement concrete M15 grade hectometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703

Providing edge stones on valley side of formation as per drawing metre and Technical Specification Clause 1608.2.6

Sinage & road safety item such as crash barrier

Excavation in foundation for retaining & brest wall in all types of soils and rocks including all lead & lift and disposal of surplus material as per direction of Engineer-in-charge.

Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810)

fixing of corrosion resistant 2mm thick DG Grade Type XI retro- reflective cautionary, mandatory, informatory sign board with 10 year warranty as per IRC:67 made of high intensity sheeting fixed over ACP (Aluminium Composite Panel) 3 mm thick (including framing and bracing with fabrication, plotting of letters on Electro cut film, pasting, riveting, taping and nut, bolts, washers and rivets etc for fixing), supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing issued in original by retro-reflective sheeting manufacturer having operations in India by their indian subsidary. (Clause No. 801 of MORTH) 600 x 450 mm Rectangle

Road Delineators / Vertical Guide Posts: Providing and fixing of Standard Metal Delineator consisting of minimum retro reflective unit exposed area of 330 sqcm, full cube corner micro prismatic nonmetallic retro reflective sheeting on each side conforming with IRC 67 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron. The posts shall have ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 anchored with PCC M-15 onto the ground. The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30 o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have sufficient arrangement to make the reflective sheets vandalproof. Including all test report and warranties as per IRC 67 and IRC 79.

Providing and laying of hot applied thermoplastic compound of ISI Mark Approved Quality of 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

AVINASH RAWAT

M/S SHIVA CONSTRUCTION

Ramesh Singh Rawat

MUKESH NEGI