Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹22.2 L+₹1.1 L (5.27%)Rejected-Finance | L2 | Rejected-Finance Not the lowest bidder | |
| 3 | L3₹23.1 L+₹2.0 L (9.69%)Rejected-Finance | L3 | Rejected-Finance Not the lowest bidder | |
| 4 | L4₹23.2 L+₹2.1 L (9.89%)Rejected-Finance RAMAKRISHNA COLONY PO MAJHIPARA DIST 24 PARGANAS NORTH PIN 743145 STATE WEST BENGAL | 24 PARAGANAS NORTH | WEST BENGAL | 743145 | L4 | Rejected-Finance Not the lowest bidder | |
| 5 | L5₹23.8 L+₹2.7 L (12.9%)Rejected-Finance | L5 | Rejected-Finance Not the lowest bidder |
Tender Value
₹25.4 L
EMD Value
₹50,780
Closing Date
27 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Barrackpore
Office of the Garrison Engineer Barrackpore, Kolkata-700120
SPECIAL REPAIR OF REPLACEMENT OF PCC POLES INTO STEEL TABULAR POLES, SOLAR STREET LIGHTS AND ALLIED ELECTRICAL WORKS, PROVN OF SENTRY POST WITH WATCH TOWER AT SIG UNIT, PROVN OF COVERED SHED FOR OPEN AREA OF BLDG NO. PB-221 AT KANCHRAPARA
2023_MES_634290_1
8869/E8
Open Tender
Civil Works
Item Rate
180 days
Barrackpore
Refer to tender documents
3 documents required · 3 mandatory
₹500
GE Barrackpore
₹50,780
Yes
23 Feb 2024
23 Dec 2023
29 Jan 2024
23 Dec 2023
27 Jan 2024
13 Jan 2024
Amount
Part-I (B/R Work) Surface dressing in soft /loose soil not exceeding 30cm deep and averaging 15 cm deep and getting out complete all as specified and directed.
Excavation in trenches for laying under ground cable, foundation and erection of poles and stays in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and directed.
Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm soil all as specified and directed.
Removing surplus excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting points as in soft/loose soil all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
M&L for broken stone or boulders hardcore of gauge not exceeding 63mm, deposited spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for broken bricks hardcore of gauge exceeding 63mm but not exceeding 100mm deposited spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for RCC (1:1.5:3) (Nominal Mix) type A-1 (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed.
M&L for RCC (1:1.5:3) (Nominal Mix) type A-1 (using 20mm graded crushed stone aggregate) as in Chajjas etc complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L for PCC (1:2:4) type B2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for PCC (1:2:4) type B1 using (20 mm graded stone aggregate) for coping of poles including necessary formwork and finished the surface complete all as specified and directed.
M&L for precast cment concrete (1:3:6) type C1 as in block masonary with solid blocks, etc 10cm in width and setting in mortar, complete including set in CM (1:4) complete all as specified and directed.
M&L for brick work with sub class 'B' bricks locally available best quality straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.
Providing form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc for flat, rough finish surface of concrete complete all as specified and directed.
Providing formwork to chullah hoods, chajjas, troughs and similar items including edges for flat, rough finish surface of concrete complete all as specified and directed.
S&F powder coated anodised aluminium alloy sections three tier track sliding windows series B weight of section frame 1.248Kg/m and shutter section weight 0.547 kg/m jindal or equivalent duly fitted with neoprene beading, glazing clips, tinted glass panes 5.0mm nominal thickness, aluminium wire cloth 0.45 mm dia and average width of aperture 1.4mm, aluminium alloy handles etc complete all as specified and directed. (Note : Rate shall include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc.)
S&F for interior decorative cavity/hollow PVC ceiling panels/planks of interlocking types, thickness exc 8mm and width n.exc 255mm with colour texture/shade as approved including necessary trims where required fixed with hidden screws to GI seamless framework complete all as specified and directed.
S&F of Gl frame work for seamless false ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
S&F for hangers 6mm dia GI not exceeding 1200mm in length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.
S&F for 25mm dia heavy duty stainless steel curtain rod, cut in required length and size to fit with opening including fixing in bracket with necessary screws fitted on bracket and decorative nobs on sides with necessary arrangement complete all as specified and as directed.
S&F for 125mm long curtain rod side brackets of stainless steel angular or cantilever type fixed to wall with 02 nos screws on each bracket and fitted screws for fixing curtain rod including stainless steel decorative design plain metal colour nobs(oval/shere shape) with fixing arrangement for curtain rod using a screw complete all as specified and as directed.
S&F for Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.
S&F of 100 mm long cold rolled mild steel butt hinges, medium weight complete all as specified and directed.
S&F of 150 mm long extruded brass handle fabricated type complete all as specified and directed.
S&F for 100mm mortice lock, brass, 4 leaver verticle type complete all as specified and directed
S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour as approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F of pre-painted galvalume aluminium zinc coating GI based plain steel sheet of 0.50mm thick of any colour as approved by GE having tensile strength of 550 Mpa as in ridge / wall/cladding, fixed with self tapping screws complete all as specified and directed.
S&F for MS plate (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed.
S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.
S&F of rolled mild steel angle iron roof trusses (framed) and purlins, rafters crane gantries, rails, heavy brackets etc including distance pieces, cleats, angle, tee etc including necessary cutting , welding etc complete Fe-410W (Gde E-250) quality 'A' complete all as specified and directed.
S&F for 16mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and n.exc 10cm long complete all as specified and directed.
S&F for FI (25x4mm) in Bands, straps, supports or stays for rainwater and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
M&L for TMT bars 10 mm dia and over cut to length bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F for 1mm thick Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges, dia 150mm complete all as specified and directed.
S&F for 1mm thick Mild steel sheet drop ends (for spigot or socket ends) or nozzles for half round eaves gutter complete all as specified and directed.
S&F for 1mm thick Mild Steel sheet stop ends (for spigot or socket ends) for half round eaves gutter complete all as specified and directed.
M&L for joint free coloured vitrified ceramic tiles 8 to 10mm thick (square/rectangular) polished, light shade, area of each tile not exceeding .36 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
M&L for non skid (joint free) ceramic coloured tiles of 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match with shed of tiles over and including 15mm thick screed bed or beading layer of cement mortar (1:4) for laying floor finishes complete all as specified and directed.
Ditto-all as per Item No.41.00 here-in-before but in skirting/dado over and including a backing coat of 10mm thick cement plaster in cement mortar (1:3) complete all as specified and directed.
M&L for 20mm thick granite (any type) work (table rubbed and polished) machine cut in steps, jambs, pillars, window cill, cooking platform etc bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the granite stone including and polishing over and including 20mm thick cement mortar (1:4) as screed bed complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in plinth protection & floor including finishing the cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:6) on brick work or concrete surfaces of wall, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster on concrete surface on top of RCC roof with cement mortar (1:4) mixed with WPC @200ml per 50 Kg of cement or as per manufacturer's instructions , finished the surfaces even and smooth without using extra cement complete all as specified and directed. (Note : WPC will be measured and paid separately under relevant item)
Supply only integral water proofing compound liquid, ISI marked complete all as specified and directed.
M&L for applying two coats of cement base paint over a coat of primer including preparation of newly plastered surface complete all as specified and directed.
M&L for applying two coats of oil emulsion distemper over a coat of alkali resistant primer over and including applying 3 mm thick wall care putty on wall after preparation of newly plastered surfaces of walls complete all as specified and directed.
Labour only for drilling holes for bolts etc, n.exc 25mm dia as in stone (granite/trap)/RCC surface upto 10 cm depth complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer after preparation of new steel surfaces of any description over 10cm width or girth complete all as specified and directed.
Part-II (E/M Work) M&L for point wiring complete with 1.5 sqmm PVC insulated, FR-LSH type, ISI marked, conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top, bottom, side/back wall knockout for conduit entry from any direction made out of 1.60mm thick and 50mm depth suitable for fixing of modular top cover , blanking plate as per numbers of switch modules, modular switches, sockets, fan regulators, red colour indicator, blank plates etc as approved coloures modular accessories of suitable modules and including 1.5 Sqmm PVC insulated multistranded FR-LSH type unsheathed single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surfaces by applying white/colour wash/distemper as applicable after applying of putty for smooth finish surface complete all as specified and directed for the following:- (Note:- (i) All necessary accessories such as modular box, top cover plate, blank plate, MS box, screws, washers etc are to be used of same make/brand only in relevant items. (ii) Cutting & chasing of wall for point wiring at any height shall be done and cost of the same deemed to be including with quoted rate.)
One light point controlled by one switch .
One 3/5 pin 6 amps socket point controlled by one 5/6 amps switch on independent board .
One 3/5 pin 6 amps socket point controlled by one 5/6 amps switch on same board .
All as per item No.52.00 above but 2.5 Sqmm multi stranded copper conductor with 2.5 Sqmm copper earth continuity wire connected to earth duly complete for one 15A Socket on independent board all as specified and as directed.
S&F of decorative type surface mounted 1X20 watts LED light fitting with LED lamps including fixing arrangements at any height with nuts, screws and washers and connected to ceiling rose and connecting up with and including three core sheathed flexible copper conductor cable of required size complete all as specified and directed. (Make: PHILIPS Cat No. BN170C LED 205-6500 PSU L120/ SURYA Cat No. SLE BT 20 G1/ HAVELLS Cat No. LUMINILE+ BS 20W LED 830 SPCSS or equivalent model/Cat No of make as per Appx 'D' as mentioned in PS here-in-after)
S&F of switch piano flush button single pole, one way, 5/6 amp, 240 volts, AC, ISI marked complete all as specified and directed.
S&F of switch piano flush button single pole one way 15/16 amp 240 volts, AC, ISI marked complete all as specified and directed.
S&F of socket out let, flush type, 2 in 1, 3/5 pin, 5/6 Amps, 240 volts, AC, ISI marked complete all as specified and directed.
S&F of socket out let, flush type, 2 in 1, 3/5 pin, 5/6 and15/16 Amps, 240 volts, AC, ISI marked complete all as specified and directed.
S&F of stepped type (0-4/5 step) piano type electronic fan regulator 240 Volts, 100 Watts to 120 watts single pole, ISI marked including connecting, testing complete all as specified and directed.
S&F of angle lamp holder, insulated body with back plate for batten fittings complete all as specified and directed.
S&F of ceiling rose , three terminal, PVC/polycarbonate body, ISI marked complete all as specified and directed.
S&F of powder coated sheet metal enclosure 240 volts AC, SPN distribution board 8 way for flush mounting with 200amps copper busbar, neutral bar, earth bar and MCB incomer of rating upto 200Amps, MCB SPN/DP and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface & colour coat complete all as specified and directed. (Make: Legrand Cat No. 5076 21 8 way / L&T Cat No.DBSPN008GD/C&S Cat No. CSDBSPNPCGDD08 or equivalent model/Cat No of make as per Appx 'D' as mentioned in PS here-in-after)
S&F of MCB, SP, 6 Amps to 32 Amps , 'C' series, 240 Volt, 10KA, 50 Hz, ISI marked complete all as specified and directed
S&F of MCB, SPN, 32 Amps, 10 KA, 'C' series, AC, 240 volts, ISI marked complete all as specified and directed.
M&L for earthing with glavanised steel earth plate electrode of size 600mmX600mmX6mm thick buried directly in ground (earth pit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel using GI or steel strip 25X4mm dia as earthing lead as shown in electrical plate No.3 of SSR Part-I connected to earthing test point all specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC (1:3:6) type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe , 15mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A-1 duly reinforced with 8mm dia TMT bar @150c/c both ways, one lifting handle made out of 10mm dia TMT bar 250 mm long embedded in cover slab and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layer of 15 cm thick including taking down old earthing complete all as specified and directed. (Note: Galvanised iron strip of 25X4mm dia upto 7.5m long including testing is deemed to be included with quoted rate).
M&L for earthing with glavanised steel earth plate electrode of size 600mmX600mmX6mm thick buried directly in ground (earth pit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel using GI or steel wire 4mm dia as earthing lead as shown in electrical plate No.3 of SSR Part-I connected to earthing test point all specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC (1:3:6) type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe , 15mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A-1 duly reinforced with 8mm dia TMT bar @150c/c both ways, one lifting handle made out of 10mm dia TMT bar 250 mm long embedded in cover slab and cover, wire, copper lugs etc mesh, charcoal and common salt in alternate layer of 15 cm thick complete all as specified and directed. (Notre: Galvanised iron wire of 4mm dia upto 7.5m long including testing is deemed to be included with quoted rate).
M&L for XLPE insulated, LT armoured electric cable with aluminium standed conductor 1100 volts grade, cross-sectional area 16 Sqmm, 4.0 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands, nuts, bolts and washers etc and testing complete all as specified and directed.
M&L for XLPE insulated, LT armoured electric cable with aluminium standed conductor 1100 volts grade, cross-sectional area 35 Sqmm, 3.5 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands, nuts, bolts and washers etc and testing complete all as specified and directed.
M&L for sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep including required watering and consolidation after laying and stretching the cable complete all as specified and directed. (Note: Only punned down volume of sand to be measured)
M&L for brick covering with width equal to length of brick as protection to cable with well burnt sub class ‘B’ bricks of size 250mm x 115mm x .75mm laid dry flat complete all as specified and directed.
M&L for GI pipe 50mm dia (light grade) complete with all fittings in trenches, road/culvert crossing, floors, on roof, on pole for cable protection complete all as specified and directed.
Boaring holes horizontally under road without damaging the surface of road(minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of dia not exceeding 100 mm dia for passing of UG cable all as specified and as directed.
Taking down of existing old unserviceable PCC/Steel tubular pole of any type from the PCC foundation, coping and removing from site complete all as specified and directed.
M&L for steel tubular swaged type poles 9 metrs long, type 410 SP-31 pole weight approximately 154 kgs, pole should be in one piece only and smooth finishing, ISI marked complete with all accessories such as cast iron base plate, finial taper plug, bolts, nuts, screws, washers and drilling of holes for continious GI earth wire as specified including applying two coats of aluminium paint over one coat of red oxide zinc chrome primer and embedded portion shall be painted with two coats of black paint after preparation of surface complete all as specified and directed.
S&F of 60 watt LED street light fittings, 230 V, IP-65/66 pressure die cast housing LED lamp aluminium compact high power LED street light with heat resistant toughened glass with LED lamp and necessary electric connection with suitable size copper cable including taking down old unserviceable fittings complete all as specified and directed. (Make :- SURYA CAT NO-SLE UL 60W IP66LXN, HAVELLS CAT NO. ENDURASUNDOWN SL 60W LED 765PASYBOTG, PHILIPS CAT NO. BRPO56LED59CWSLFPSUSL or equavalent model/cat no of make as per Appx 'D' as mentioned in PS here-in-after)
S&F of three phase cable junction box of size 350 x 250 x 140mm water & fire retardent proof out door type of approved , hinged/screwed type made of SMC plastic single door with incoming and outgoing connector/terminals and comprising of MCB SP 6 Amps, 240V, 10KA, 'C' Series and including galvanised flat iron clamps of size 25X5mm thick -02 Nos GI nuts, bolts & washers etc for fixing on PCC/Steel tubular pole/ wall surface etc including taking down old unserviceable box complete all as specified and directed. (Make:- Sintex/Hensel or equivalent as approved)
S&F of 1100 volts grade heavy duty cable PVC insulated copper conductor FR round flexible in street light connection from pole junction box to bottom of street light fixed on LT pole type by making two holes with welding machine for inserting cable to pole of cable size 1.5 Sqmm, 3 core multi stranded including making all necessary connection complete all as specified and directed.
S&F of GI bracket pipe of size 40 mm dia medium grade of 1.5 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on PCC & Steel poles/on wall surfaces and including suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing any place of poles with nuts, bolts & washers including grouting on wall etc including taking down old unserviceable box complete all as specified and directed.
Supply, errect, install Solar LED light fittings with Extruded Aluminium Housing corrosion proof, Solar panel (Mono Crystalline Solar PV module) 70 W , LED power 30 W, Lumen/Watt > 125, Solar Charge Controller - MPPT, Battery capacity - Maintenance free Lithium Ferro Phosphate battery 12.8V - 30Ah, BIS Approved Cells, Inbuilt BMS for Battery Safety & Enhanced battery life, Operating temperature -20 Degree to + 55 Degree, Designed for 2000 life cycle : > 5yrs life, Faster Charging, Maintenance free Backup for 2 days, PIR Motion Sensor for Automatic brightening & dimming, Lumen(LM) >3800lm, LED life time - 50000hrs, Viewing angle - 120°, Charging time - 1 day, Autonomy 2 days, CCT(K) - 5700K, Mounting height 5-6m, Working temp. -10-+55C, Dimension(mm) 1320*382*55, Net weight 19 Kg, including earthwork, PCC foundation as per site requirement and removing of old unserviceable item from existing location after disconnecting of existing solar street lights with all accessories, cables complete all as specified and directed. (Make :- BAJAJ Cat No. BSZSL 30W All-in-one standard/SURYA Cat No. SSLE AIO30W D2 T5WP 30 AH LFP W5 SOLAR or equivalent model/Cat No of make as per Appx 'D' as mentioned in PS here-in-after)
M/S KARTICK CHANDRA CHAKRABORTY
MAZUMDER AND CO
R.S. COMPANY
INDUSTRIAL CONSTRUCTION
azad enterprise
CHATTERJEE ENTERPRISE
M/s S K SHARMA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .