CWE BLY/ GE (E) /11 OF 2023-24 MAINT/REPAIR TO ROADS AND ROAD FURNITURE UNDER GE (EAST) BAREILLY

Amount

Repair to pot holes any depth, not exc 1sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) (including supply of raod metal) complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n. exc 400 sqm and exc 50mm and n exc 100 mm in deep complete all as specified and directed.

M&L for preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and Applying evenly a priming/ tack coat with bituminous primer at 10 kg per 10 sq metre (Paving bitumen) complete all as specified and directed.

M&L for 100mm thick (compacted thickness) WBM with coarse aggregates ( lime stone/sand stone/flint or quartzite) of grading 1 (90 to 40mm size), spread, rolled and consolidated to gradient and camber required with 8 to 10 tonne power roller complete all as specified and directed.

M&L for Premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. Note :(i) Aggregates for Bituminous works shall confirm to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications) with the following Constraints:- Aggregate passing 26.5 mm IS Sieve -100 % Aggregate passing13.20 mm IS Sieve -60% to 80% Aggregate passing 4.75 mm IS Sieve -20% to 30% Aggregate passing 2.36 mm IS Sieve -5% to 10%

M&L for preparing surfaces by brushing with wire brushes for removing caked mud from black top surface etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sq metre using paving bitumen over Bitumin macadam portion complete all as specified and directed.

M&L for bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content of paving bitumen (VG-30 grade) by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and premixed material, laid with mechanical paver finished including rolling to required camber and gradient complete with 8 to 10 tone power roller to required compaction complete all as specified and directed. Note :(i) Design Mix for SDAC shall be carried out through an authorised testing lab and the cost of testing shall be included in quoted rate. (ii) Aggregates for Bituminous works shall confirm to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications) with the following Constraints:- Aggregate passing 13.2 mm IS Sieve -100 % . Aggregate passing 5.60 mm IS Sieve -40% to 50% , Aggregate passing 2.8 mm IS Sieve -30%to 35%

Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for machine pressed precast cement concrete factory made glazed kerb stone of size 300x100x450 mm PCC (1:2:4,) type B0 (using 12.5 mm graded stone agg) jointed in CM 1:4 including excavation & earthwork complete all as specified as directed

Refixing of existing precast cement concrete kerb stone with alligenment and jointed in CM 1:4 complete all as specified as directed.

M &L 75 mm thick PCC (1:4:8), type D2 (using 40mm agg) as in sub base including finishing the surface even and rough to receive the top layer complete all as spd and directed

M&L Sand filling under floors or in foundations including watering and consolidation complete all as spd as directed.

M&L for coloured glazed interlocking Machine pressed cement concrete factory made paver block any shape and size confirming to IS 15658 -2006 of 80 mm thickness, M-40 Grade, machine pressed of pattern and colour as approved complete all as specified and directed.

-ditto- as above item but except paver block complete all as specified and directed.

S&F old painted surface on kerb stone and applying one coat of synthetic enamel glossy paint for day and night visibility with different colour combinations black/white or yellow/black as directed by Engineer-in-Charge

S&F in replacement cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions

S&F in replacement solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

S&F in replacement of retro reflecting 48 inches (1200 mm high) road delinators post black made of 16 gauge 62mm dia round pipe two side reflective in red, white and yellow super prismatic 5 strips of size 7.50 x 10 cm complete incl PCC 1:2:4 (20 mm graded agg) complete all as specified and directed.

S&F in replacement r road rummble straight 300mmx 150mm made out of hard acrylic polymers of colour yellow abd black with both side reflector for fixing with suitable bitumin and including filling PCC 1:2:4 complete good finish surface complete all as specified and directed

S&F in replacement of Road safety 580 mm dia convex mirror with frame made up of H2 polycarbonate reflective mirror having body ABS /fibre suitable for indoor/out door use with hood complete with mounting hardware including suitable height /dia of MS tubular pipe with painting and grouting with PCC 1:2:4 complete good finish surface complete all as specified and directed.

S&F in repair of Road safety 800 mm dia convex mirror with frame made up of H2 polycarbonate reflective mirror having body ABS /fibre suitable for indoor/out door use with hood complete with mounting hardware including suitable height /dia of MS tubular pipe with painting and grouting with PCC 1:2:4 complete good finish surface. all as spd as directed .

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

M&L for new or previously treated surfaces on kerb stone applying one coat of Kerb Painting Kerb stone painting with glossy paints for day and night visibility, with different color combinations Black/White or Yellow/Black over one coat of Priming paints coat of any description complete . all as Spd and directed

M/S Shree Sai Builders (BID ID -3047487)

JALAKASH (BID ID -3039944)

SHIV SAI ENTERPRISES (BID ID -3047614)

TEAM ACC INFRABUILD PRIVATE LIMITED (BID ID -3042226)