Construction of additional 05 nos. of classrooms at Ghodi , Padaria & Rajghad location in Bharuch District under CSR initiative by DGVCL 2025-26

Name of Work: Construction of additional 05 nos. of classrooms at Ghodi , Padaria & Rajghad location in Bharuch District under CSR

initiative by DGVCL 2025-26

Sr. No. Description Qty Unit Amount

Excavation for foundation upto 1.5 m depth including sorting out and

1 stacking of useful materials and disposing off the excavated stuff upto 50 244.52 CMT 117.08

Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

2 out and stacking of useful materials and disposing off the excavated 214.20 CMT 129.81

stuff upto 50 Meter lead.(A) Loose or soft soil

Filling with the available excavated earth (excluding rock) in trenches, plinth, sides of

3 foundation etc. in layers not exceeding 20cm in depth consolidating each deposited 366.98 CMT 130.39

layer by ramming and watering.

Filling foundation and plinth with murrum or selected soil in layers of 20 cm. thickness

inculding watering, ramming and consolidation etc. complete.

Brick work using common burnt clay building bricks having crushing strength not less

5 than 35 kg./Sq.Cm. in foundationand plinth in Cement Mortar 1:6. (1‐ Cement : 6 41.76 CMT 4772.86

‐finesand)(C) Fly Ash Bricks

Masonary work using Aerated light weight concrete block having crushing strength not

less than 35 kg/sqcm for super structure above plinth level upto floor two level in

6 cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per 167.41 CMT 4528.57

Technical Specification

Brick work using common burnt clay building bricks having crushing strength not less

than 35Kg./Sq.Cm. for superstructure in cement mortar 1:6(1 cement :6 fine sand)

including curing etc. complete. (C) Fly Ash Bricks For all heights and all floor

Half brick in common brunt clay building bricks having crushing strength not less than

8 35 Kg/sq.cm in cement mortar 1:4 (1 cement : 4 coarse sand) (C) Fly Ash Bricks in 91.69 SMT 720.93

super structure including curing etc. complete.For all floors

Providing & laying Cement Concrete 1:4:8 (1 Cement :4 Coarse sand :8 hand brocken

9 stone aggregates of 40mm nominal size) in plinth and curing complete including cost 26.02 CMT 2640.21

of formwork. (A) Foundation and Plinth - At plinth level

Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse sand : 10- hand

10 broken stone aggregates 40 mm nominal size) and curing complete including cost of 3.46 CMT 2477.43

formwork in (A) Foundation and Plinth

Providing & laying Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 graded

stone aggregate 20 mm nominal size) & curing complete including cost of form work

(A) Foundation and Plinth -Below Tie beam, Plinth protection & surface leveling work.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

12 graded stone aggregate 20mm nominal size) laid in one layer and finished with a 20.38 SMT 283.15

floating coat of neat cement. (A) 40mm thick.

Providing and laying controlled cement concrete M.150 for curing complete

including cost of formwork and excluding cost of reinforcement for reinforced

concrete work in (A) Foundations, footings,Base of columns and Mass

concrete (Cement Level 290 Kg)

Providing and laying controlled cement concrete M.200 and curing complete including

the cost of formwork and excluding the cost of reinforcement for reinforced concrete

work in (C) Coping Vertical and horizontal for all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing complete including

the cost of formwork and Excluding the cost of reinforcement for reinforced concrete

work in (A) Foundations, footings, Base of columns and Mass concrete.(Cement Level

Providing and laying controlled cement concrete M.250 and curing complete including

16 the cost of formwork and Excluding the cost of reinforcement for reinforced concrete 28.49 CMT 5385.6

work in Plinth Beams. (Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing complete including

17 the cost of formwork and excluding the cost of reinforcement for reinforced concrete 3.45 CMT 7013.47

work in (C) Chajja all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and curing complete including

18 the cost of formwork and excluding the cost of reinforcement for reinforced concrete 47.22 CMT 6299.54

work in (C) Beams all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing complete including

the cost of formwork and excluding the cost of reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and struts all floor (Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing complete including

the cost of formwork and excluding the cost of reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and struts all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and curing complete including

21 the cost of formwork and excluding the cost of reinforcement for reinforced concrete 75.65 CMT 6533.35

work in (C) Slab all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and curing complete including

the cost of formwork and excluding the cost of reinforcement for reinforced concrete

work in (E) Staircases including lending all floor (Cement Level 360 Kg)

Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement (ISI mark) Confirmed to IS-

23 1786 for R.C.C.work including Cutting, bending, binding and placing in position etc. 23000.00 KG 76.21

complete.For all floors

Providing 10mm thick cement plaster in single coat on on brick/concrete walls &

24 Ceilling & Soffit of stair interior plastering in cement mortar 1:4(1 cement 4 sand) 471.98 SMT 150.8

watering, curing etc. complete.For all floors

Providing 15mm thick cement plaster in single coat on rough or fair side of single or

25 half brick wall for interior plastering in cement mortar 1:4(1 cement 4 sand) watering, 1181.70 SMT 212.52

curing etc. complete.For all floors

20mm thick sand faced cement plaster on walls above ground level consisting of

12mm thick backing coat of cement mortar 1:3(1 cement 3 sand) and 8mm thick

26 finishing coat of cement mortar 1:1(1 cement 1 sand) watering, curing etc.complete 674.80 SMT 329.29

for any Height.

Wall painting (three coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.On Wall

Distempeing (Two coats) with oil bound washable distemper having VOC content les

than 50 grm/liter of approved brand and manufacture and of required shade on wall

surfaces to give an even shade, over and including a priming coat and putty with

28 alkali resistance primer of approved brand after thoroughly brushing the surface and 1428.36 SMT 71.9

other foreign matter and also including preparing the surface even and sand parpered

smooth As per Approval of Engineer Incharge

Painting two coates (Including Priming coat)having Low VOC content over new steel

and other metal surfaces with enamel paint,primar coat, brushing, interior to give an

even shade including cleaning the surface of all dirt,oil, grease,dirt, dust and other

foreign matter with fine steel wood, scrapers and sand paper with ready mixed

priming paint brushing red lead etc. complete.(As directed by Engineer in charge)

Providing and laying 25mm thick polished Kota stone flooring/staircase treads (two

pieces with three groves in front of steps) over 20mm (average) thcik base of cement

mortar 1:6 (1 cement 6 coarse sand) laid over and jointed with grey cement slurry

including curing, rubbing, and polishing etc. complete.

Providing & fixing average 25mm thick Double polished Kota stones for shelves in cup

31 board, seating plat form, including curing, rubbing, polishing etc. complete. (As 23.33 SMT 796.89

directed by Engineer in charge)

Providing and laying 18 mm thick mirror polished black granite stone machine cut in

single piece (Max. available) in sill and jambs laid over 10 mm thick cemen mortar 1 :

3 (1 cement : 3 coarse sand) and jointed with grey cement slurry with matching

pigment incl. rubbing and polishing half rounding edge both side etc. complete colour

and shed as approved by architect engineer in charge. (As directed by Engineer in

providing & laying cement water proofing of average 60mm thick for terrace for all

floors using first layer cement mortar (1:3) over an exsisting surface second layer of

arranging brick bats acording to slop adding suitable chemical to make water tieght &

33 again third layer of cement mortar 1:3 on above including adding water proffing 275.39 SMT 351.9

compound and finishing top with net cement slury using cement @ 2.75 kg/sq mt.

making any patterns and design on the top etc. complete as directed.(As directed by

Engineer in charge)

Providing & Laying Broken China Mosaic flooring for plain & curve surface 12mm to

20mm of broken piece of ceramic tiles or Glazed tiles ( one or more colour as directed

by Engg. In charge ) to be laid over cement mortar bedding of CM 1:3 to plain or and

34 slopes and to be tempered to bring mortar cream up to and colour pigment including 177.66 SMT 747.29

rounding of junctions and extending them pu to 15cms along the wall and curing with

bends any patterns of designs as per deawing or directions including cleaning with

water and oxilic acid using 1 kg / 1 bag of water proofing materials.

Providing cement vata (10 cm X 10 cm size) quartar round in cement mortar 1:1

35 including neat cement finishing, watering etc. complete Respectely plaster acitivity 165.50 RMT 23.68

shall be commenced only after completion of vata work.

Providing & fixing in position mild steel door with ventilation frame 40x40x6 mm and

shutter frame 35x35x5mm ,75x5 mm ms flate at lock rail,10 mm square bar in vent

36 at10 cm c/c coverd with corrugated ms sheet 0.6 mm thick, including applying a 38.60 SMT 3693.19

priming coat of read lead paint including cleanicn the surface of all dirt, dust and

other foreign matter (As directed by Engineer in charge& approved drawing and

Providing & fixing in position mild steel window with ventilation frame 35x35x5 mm

and shutter frame 25x25x5mm ,10 mm square bar grill at10 cm c/c coverd with

37 corrugated ms sheet 0.6 mm thick,including applying a priming coat of read lead paint 24.75 SMT 4101.31

including cleanicn the surface of all dirt, dust and other foreign matter (As directed

by Engineer in charge& approved drawing and design etc.)

Providing and fixing window having extruded aluminum Colour Powder Coated

section frame main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605,@

Wt 1.094 Kg / Rmt), horizontal two track member size 61.85 mm x 31.75 mm x

1.20mm (of Jindal Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size

61.85 mm x 31.75mm x 1.30 mm (of Jindal Section no:8758 @ wt.of 0.0.659 Kg/mt)

38 with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal 19.80 SMT 1713.7

Section no:8949 @ wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm x

1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt.

Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

Steel work, M.S Grill, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of read lead paint. (A)In beams

39 and joists, channels angles Tees, flats, with connecting plates or angle cleats as in 1754.24 Kg 90.48

main and cross beams. Hip and jack rafters, purlins conneted to common rafters and

40 Providing & fixing G.I rain water Spout of 65mm dia and 60cm length. 16.00 No 717.46

Painting of logo on front side wall as directed by Engineer in charge and as per

approved drawing.

Providing and fixing Chicken mesh jali (22 gauge) 15cm wide at the junction of

different surfaces of different material component at the time of plastering to prevent

cracking in plaster surface as and where directed at all floors with all leads and lifts

Providing & Fixing Green board(2400mm x 1200mm) with soft board(1200mm x

43 1200mm) on wall as per the drawing & design etc. complete. 5.00 Nos 10352.5

Providing and Fixing 5mm thick Acrylic Name Plate for dark zink glare with braille lippi

44 and fixing with double sided bonding tap and screws as per direction of Engineer in 5.00 No 484.8

charge of Size having 12'. X 4 ' etc. compl.

Providing and laying tactile tile (for vision impaired persons as per standards) of size

300x300x15 mm having with water absorption less than 0.5% and conforming to

IS:15622 of approved make in all colours and shades in for outdoor floors such as

45 footpath, court yard, multi modals location etc., laid on 20mm thick base of cement 13.19 SMT 1850.22

mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the

joints with white cement mixed with matching pigments etc. complete as per direction

of Engineer-in-Charge.

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working pressure PVC pipes of

the following out side dia. Special density complete with special flange compression

type fitting,wall clips etc. including making good the wall ceiling and floor.(G) 160 mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall ceiling

and floor.(G)110 mm

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting

Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand)

and jointed with gray cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of

49 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 376.10 SMT 1073.13

coarse sand ) finishing with flush pointing in white cement

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of

50 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and 37.60 SMT 1141.45

jointed with white cement slurry

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following type, erected on PVC /

51 Metallic/Wooden box, single mounting base frame covered with 20.00 Nos 498.83

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (a)

with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type switch and hum free EME

four or more step type electronic fan regulator with separately mounted and

52 accessories with earth continuity of following type erected on PVC / Metallic/Wooden 15.00 Nos 713.05

box, single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose

/ H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

53 erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] 6.00 Nos 529.43

For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb

db board (a) with medium class Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of accessories.[II]

For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board. (a)

with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

55 textured / metallic/white front plate modules erected on / in wall / ceiling with 20.00 Nos 286.65

following type accessories Cat. III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

56 metallic/white front plate , modules erected with necessary connections as per site 5.00 Nos 226.46

situation directed by Engineer In charge (10) 6/16Amp. Universal socket Cat.III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

57 metallic/white front plate , modules erected with necessary connections as per site 20.00 Nos 28.56

situation directed by Engineer In charge. (7) Blank Plate Single Cat.III

Providing and erecting ISI mark embossed Medium class RIGID PVC PIPES

(F.R.L.S.)of following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed (a) 20 mm

Providing and erecting ISI mark embossed Medium class RIGID PVC PIPES (F.R.L.S.)

of following size complete to be erected on/in wall or ceiling erected with necessary

PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia

of pipes, in approved manner as directed (b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling,

60 PVC bushes, Check-nuts etc. complete of following sizes.(2) 25 mm 5.00 RMT 23.46

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in

61 /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated 150.00 RMT 69.37

stranded wire of green colour for earth continuity of following size (A) with medium

class Rigid PVC pipe and accessories (b) 2 wire 1.5 sq. Mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in

62 /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated 300.00 RMT 91.81

stranded wire of green colour for earth continuity of following size (A) with medium

class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. Mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

63 ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 50.00 RMT 125.47

colour for earth continuity of following size A) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. Mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

64 ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 10.00 RMT 165.26

colour for earth continuity of following size (A) with medium class Rigid PVC pipe and

accessories (b) 2 wire 6 sq. Mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

65 ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 10.00 RMT 204.02

colour for earth continuity of following size (A) with medium class Rigid PVC pipe and

accessories (g) 4 wire 4 sq. Mm

Providing & erecting Switch board for Computer or electric apparatus consisting of

following modular type accessories mounted with PVC / Metallic concealed/open box

with single mounting base frame covered with textured/metallic /white front

plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

67 Decorative call bell Ting-tong box type 250 volts complete erected 1.00 Nos 80.59

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Tube Light with integral driver (c)

18-20 Watts, Surge - 2KV,IP-20, 4 feet Cat-lll

Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge

69 protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp 4.00 Nos 132.61

holders, pf >= 0.5 (B) LED Lamps integral type, with PC diffuser suitable LAMP

holder(b) 5 to 8 watts Cat-lll

Supplying and erecting LED Solar street lights with High power White LEDs wattage of

1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/

70 lenses with company mark/name engraved or embossed 4.00 Nos 21544.51

with 36 hours battery backup & MPPT 24V,7.5 A charge controller with 12 hours

automatic switch on/off with wind speed resistance 44 m/s as per IEC

(B) 15W, IP-65, PV Module – 80W and 4 mtr poles complete erected

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

71 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 10.00 Nos 132.61

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C

72 Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 9.00 Nos 357.04

following capacity (A) 6 to 32 Amp. Cat.III

Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB.

Providing and erecting metallic vitrified danger notice board as per language

74 suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected as 2.00 Nos 80.88

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved make OEM has to submit

75 test certificate) & having back filling compound of (B) Inner chemical (CCM 3.00 Nos 6863.23

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time Necessary test

report must be submitted. (b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV grade

to be erected as directed of following size. (L) 4 core 6 Sq. Mm

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double

ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

77 having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with 15.00 Nos 2320.73

3 core flexible wire with earthing.(Make shall be approved by Engineer in charge))

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with

Making the site as original.

Miscellaneous contigencess for any work not specified in tender or any excess in

specified items if required during execution of work as per instruction opf EIC. (Rates

shall be decided from lowest of 3 quotations and shall be approved by EIC before

carrying out work)

consultancy 3% if required Carrying out structural design including required testing

and getting BUC approval from govt. /local authority including preparation plan and

submision of proposal to govt. /local authority for getting permission etc. complete as

per EIC . (@3% of total cost)

Total Amount in Rs.

Total Amount in Rs.

"All royalties, toll tax, local tax, development charges, and any other taxes etc., in respect of this contract and also any statutory variation in

future towards above mentioned taxes & any other taxes if levied in future by statutory authority applicable to the this contract shall be payable

by the con-tractor and DGVCL will not entertain any claim whatsoever in this respect.

The Contractor has to pay 1% Labour Welfare Cess of Bill amount to the concern Government Department.

The contractor shall also produce the receipt of payment of 1% welfare cess from the respective Govt., Department.

The proof of payment made by the contractor to the appropriate department shall be submitted to DGVCL, failing which appropriate amount

shall be withheld on getting information/instruction from the concerned department.

Addl. Chief Engineer (P)