Development of Park near Happy Hour School in Ward No.6. Sub head -P/L Local slate flooring ,Providing and fixing Cast iron pole and Beas stone flooring)

Amount

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. Pick Work. Jumper Work including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: edges of slab &breaks in floor and slab surfaces such as walls (any thickness) partitions and the like including attached including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in including attached pillasters buttresses, plinth and string courses and the like including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:2:4 (1cement:2sand:4graded stone aggregate 20mm nominal size) excluding cost of centring and shuttering in: 0912010A Foundations and plinth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying local slate stone slab flooring 25mm average thick on 20mm average thick base of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab i/c rubbing and granite polish finish complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In trusses and trussed purlins in buildings including carriage of material in all leads and lift and direction of Engineer-in-charge.

Painting two coats(excluding priming coat)on new steel and other metal surfaces with aluminium paint,brushing to give an even shade including cleaning the surface of the dirt,dust and other foreign matter including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 Graded stone aggregate 25mm nominal size) and curing complete excluding cost of form work in foundation and plinth in breast and retaining walls etc. including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying kurb stone cement mortar 1:4 (1 cement : 4 sand)including carriage of material in all leads and lift and direction of Engineer-in-charge.

Supplying and stacking of good earth at site including royalty and carriage upto 100 metres on head load and 1 km. By mechanical transport (earth measured in stacks will be reduced by 20% for payment) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Supplying and stacking sludge at site including royalty and carriage upto 100 metres by head load and 1 km. By mechanical transport (Sludge measured in stacks will be reduced by 8% for payment including carriage of material in all leads and lift and direction of Engineer-in-charge.)

Supplying and stacking at site dump manure from approved sources (duly screened through specified sieve) including carriage upto 100 metres on head load and 1 km. By mechanical transport (manure measured in stacks will be reduced by 8% for payment) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Rough dressing trenched ground including breaking clods including carriage of material in all leads and lift and direction of Engineer-in-charge.

Fine dressing the trenched ground including carriage of material in all leads and lift and direction of Engineer-in-charge.

Spreading sludge dump manure or/and good earth in required thickness (cost of sludge, dump manure or/and good earth to be paid seperately) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Mixing earth and sludge or manure in proportion specified or directed including carriage of material in all leads and lift and direction of Engineer-in-charge.

Grassing with 'Doob' grass including watering and maintenance of the Lawn for 30 days or more till the grass from a thick lawn free from weeds and fit for moving including supplying good earth if needed (the cost for Doob grass shall be paid seperately including carriage of material in all leads and lift and direction of Engineer-in-charge.

Preparation of beds for hedging and shrubbery by excavating upto 1.5 metre depth and trenching the excavated base to a further depth of 30cm. Refilling the excavated earth after breaking clods and mixing with sludge or manureia the ratio 8:1 (8 parts of stacked. volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8% flooding with water, filling with earth if necessary, watering and finally fine dressing levelling etc. including stacking and disposal of materials declared un-serviceable and surplus earth by spreading and levelling as directed with in a lead of 20 metres and lift upto 1.5 metre completeNotes:- Earth work in excavation to be paid vide item no 07040000 depending upon classification of soil. ii) Cost of sludge, manure or extra earth to be paid for separetaly including carriage of material in all leads and lift and direction of Engineer-in-charge.

Uprooting rank vegetation and weeds by digging the area upto a depth of 1.5m (Earth work to be paid separetaly) removing all weeds and other growth with roots by forkingrepeatadly, breaking clods, rough dressing flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass including disposal of all rubbish with all leads and lifts including carriage of material in all leads and lift and direction of Engineer-in-charge.

Renovating lawns including weeding sheling the grass, forking the ground, top dressing with sludge or manure mixing the same with forked soil, watering and maintaing the lawns for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving and disposal of rubbish as directed including supplying good earth if needed but excluding the cost of sludge or manure including carriage of material in all leads and lift and direction of Engineer-in-charge.

Half brick circular treeguard insecond class bricks, internal diametre 1.25m, and height 1.20m. above ground and 0.20m. Below ground bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 sand) and the intermediate courses being in dry honey comb masonry as per design complete.

Providing and fixing M.S. Flat iron tree guard 60 cm. Dia, and 2 metre high above ground level, formed of 4 Nos. 25x6mm.and 8 Nos. 25x6mm vertical M.S. Flats riveted to 3 Nos. 25x6mm M.S. flat iron rings in two halves, bolted together with 8 mm. Dia and 30mm. Long bolts including painting two coats with paint of approved brand and manufacture over a coat of priming complete in all respects including carriage of material in all leads and lift and direction of Engineer-in-charge.

Edging with second class bricks laid dry length-wise including excavation refilling, consolidating with hand packing and spreading neatly surplus earh within a lead of 20 metres including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying Beas stone flooring 50mm.(average)round thickness of stone laid over 25mm. Thick cement mortar bed of 1:4(1cement: 4 sand) including pointing with cement mortar1:3(1cement:3sand) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing ornamental cast Iron Pols Having overall dia 100mm with ornamental Light gloobes having 5 m Height (Market rate) including carriage of material in all leads and lift and direction of Engineer-in-charge.

sunil Kumar chandel