Supply and Installation of 3 way RMU with Associated work at Kimadi, Anarwala, Dehradun Junction point of Kaulaghar and CCL feeder

Decentralized Material

Supply of 11 KV Outdoor both side extensible 3 way ring main unit as per specification A

Supply of 11 KV 630A 25 KA/ 1 Sec SF6 insulated ring main unit consist of 1 LBS and 2 VCB (CVV type)

Suspension Clamp with J-hook and accessories

Supply of 100mm Dia Gi Pipe For HT Cable termination from HT Pole to RMU

PP Clamp for ST Pole SP-55 with N&B

PP Clamp for ST Pole SP-23 with N&B

Stay Clamp for ST Pole SP-23 with Nut and Bolt

Errection

Cartage of ST Pole and PCC Poles from store centre to construction sir with loading,unloading at both points.(loading ,unloading pluse carriage per pole) and proper dtacking.

STP SP-33 Galvanized.

Other Stock Material

Exacavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all type of soil incluiding proper dressing of sides and ramming of bottom incluiding getting out the excavated soil and disposal of surplus excavated soilas directed complete work

Erection of following single support pole in proper level and alignment alongwith fixing of all accessories, like top channel & clamps as per RESSPO construction Manual

grouting of Pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 block including cost of cement , sand and stone blast back filling of soil and and boulders in pit and ramming and proper alignment ,leveling as per RESPO counstruction manual

Muffing of poles size 0.45cmx0.60 cm radious with cc 1:3:6 block size 45cm height from ground level incuiding cost of cement ,stone and sand etc.

Erection & Commissioning of 11 KV Outdoor both side extensible 3 way ring main unit as per specification with plinth-A

Erection & Commissioning of 11 KV Outdoor both side extensible 3 way ring main unit as per specification with plinth

Erection & Commissioning of RMU

Foundation for Ring Main Unit 3 Way as per Drawing

Jointing and fixing of cable jointing Kits indoor/outdoor Cable boxes.

11 KV XLPE heat shrikable

Straight through 11 KV XLPE

Fixing of GI pipe

Chemical Earthing : Earyhing of distribution transformer incluiding digging of pit of sizer 2.5 Mtr depth and make hole od size 150 mm .placing of earthing electrode (to be supplied by contractor as per drawing No. A) as drawing B, connecting the same woth Gi strip (to be supplied by contractor )of size 35x6 mm asper drawing C for a minimum legth 6 m, treatement of soil with higly conductive substance as per IS 30343 complete in all respect ,result of earthingresistance to berecorded in MB before and after installtion of earthing . the earth resistance after earthing should be less then 1

Erection Providing and fixing of wire mesh of size 50 x 35 mm around plinth and toe wall duly welded with frame of MS angle iron 35x35x6m and strip 35x6mm in mid of each side along with wire mesh(width of wire mesh 1.5 meter) with the height of 0.5 meter above the plinth and 2 meter above toe wall with 1 no gate and locking arrangment in the toe wall size including grouting of 6 nos legs oin the ratio in block of size 0.25 x 0.25 x 0.45 meter including gravlling of shingle of size 20 to 40 mm complete paint of wire mesh with aluminium paint with two coat ( including the cost cement and all meterial).

Fabrication of M.S. Channel Angle iron after cutting in required sizes with drilling of holes upto good finish for top channel ,bracing and special type bracket etc. as per RESPO schedule and local approved drawing

Exacvation of earth for stay pit of size 0.6x0.6x1.2 mtr in all type of soil incluiding proper dressing of sides and ran=miing ob bottom incluiding getting out of the excavated soil and disposal of surplus excavated as directed complete work

Fixing tigtning and nozzaling of stay with pole and stay with pole and stay rod on required tension as per drawing/RESPO manual

11 kv Line

grouting of Stay in size 0.6x0.6x0.3 of the support in CC ratio 1:4:8 block including cost of cement , sand and stone blast back filling of soil and and boulders in pit and ramming and proper alignment ,leveling as per RESPO counstruction manual

Laying sreading ,stringing of cable AL 3x120 sq mm XLPE 11 KV with ACSR Rabit conductor for pullying and winging

Creative Entrepreneurs LLP