REPAIRS TO CERTAIN WOODEN AND STEEL FURNITURE ITEMS AT MIL STN KOTA

Amount

CHARPOY GI PIPE WITH PLYWOOD, Drg No FD-220

Removing old broken GI long rail 32mm bore from charpoy and S&F new long rail in position made out of GI pipe 32mm bore medium grade duly threaded on both ends, size as per drawing, complete all as specified and as directed. Note :- Above quoted rate shall be inclusive of tightening of loose GI elbow, if required at site.

Removing old broken short rail and fixing short rail of old GI pipe 32 mm bore medium grade made from the broken long rail as retrieved from Srl item No 1.01 (here-in-before) duly threaded on both ends, size as per drawing, complete all as specified and directed.

Removing old broken legs & fixing leg made of old GI Pipe 32 mm bore medium grade made from the broken short rail retrieved vide Srl item No 1.02 (here-in-before) by cutting and threading required including clamp made from 25 X 3 mm thick flat iron for MNF set and 3mm thick MS plate of 40 mm dia, welded to the bottom of legs complete all as specified and directed.

Removing broken/unserviceable GI check nut from charpoy GI Pipe and providing new GI check nut of 32mm dia for charpoy GI pipe complete all as specified and as directed.

Taking out old unserviceable GI elbow from GI pipe charpoys including opening of MS flat iron and supply and fixing new GI elbow 32 mm bore 3 way, ISI marked and also refixing of MS flat iron, complete all as specified and as directed.

Removing broken/unserviceable MS flat iron from GI pipe charpoys and supply and fixing new MS flat iron of size 35mmx4mm of 900mm long, complete all as specified and as directed.

Removing old unserviceable plywood top from charpoy GI pipe & tightening complete charpoy and supply and fix 12mm thick plywood, commercial type, BWR grade, size 1980 x 900 mm, including nuts and bolts etc as required at site, complete all as specified and directed.

S&F in renewal of shoe of charpoy GI pipe with new mild steel shoe, 3 mm thick and 40 mm dia, welded to bottom of leg, complete all as specified and directed.

Book Case Wooden , Drg Nos. FD-45, 237

Supply and fixing in renewal of unserviceable shutters of book case wooden made of 17/18mm thick prelaminated particle board both side laminated exterior grade natural teak face & including 4 mm thick TW edging, aluminium anodized knob & continuous piano type hinges of size and shape all as specified and shown in drg.

Supply and fixing in renewal of unserviceable side (right/left) of book case wooden made of 17/18mm thick prelaminated particle board both side laminated exterior grade natural teak face & including 4 mm thick TW edging of size and shape all as specified and shown in drg.

Supply and fixing in renewal of unserviceable Top / bottom of book case wooden made out 18mm thick prelaminated particle board both side laminated exterior grade natural teak face including 4 mm thick TW edging of size and shape all as specified and shown in drg.

Supply and fixing in renewal of unserviceable shelf (large) of book case wooden made out 17/18mm thick prelaminated particle board both side laminated exterior grade natural teak face & including 4 mm thick TW edging of size and shape all as specified and shown in drg.

Supply and fixing in renewal of back of book case with 6 mm thick ply of size and shape all as specified and shown on drg.

Supply and fixing in renewal of leg and batten frame of book case made of Ist class hard wood shisham of size and shape all as specified and shown on drg.

M&L for applying high gloss french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces (new and old parts), complete all as specified and directed..

Chair BKB/ Chair Wooden Bottom, Drg No. FD- 285

Removing of old unserviceable following parts from chair BKB/chair wooden bottom and supply & fixing new parts made of first class hard wood (Shisham/teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - Rear leg

Front leg

Front/side/rear rail

Back rest

Stiffener (side/centre)

Supply and fixing in renewal of new Hard PVC shoe of superior quality of chair BKB/wooden Bottom, complete all as specified and shown on drg.

Supply and fixing in renewal of 6 mm thick plywood commercial type, BWR grade to Chair wooden bottom, fixed with steel screw, complete all as specified and shown on drg.

M&L for applying high gloss french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces (new and old parts), complete all as specified and directed..

Chair Dining (PVC Seat) , Drg No.FD/MAP-II/05

Removing of old unserviceable following parts from chair dining (PVC seat) and supply & fixing new parts made of first class hard wood (Shisham/teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - Front leg

Rear Leg

Front/back/side rail

Stiffener (side/centre)

Supply and fixing in renewal of new Hard PVC shoe of superior quality of chair dining (PVC seat), complete all as specified and shown on drg.

Supply and fixing in renewal of 4 mm thick PVC seat of chair dining in proper size & shape, complete all as shown on drawing and as specified. Make of seat - Amko/Confo/Harmony or Equivalent as approved by the GE

M&L for applying high gloss french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces (new and old parts), complete all as specified and directed..

Chair Dining MAP (Cushioned), Drg No.FD/E6/MAP/10 (R)

Removing of old unserviceable following parts from chair dining MAP/cushioned and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - Front leg

Rear Leg

Front/back/side rail

Back rest strip

Vertical strip

Stiffener (side/centre)

Supply and fixing in renewal of new Hard PVC shoe of superior quality of chair dining MAP/cushioned, complete all as specified and shown on drg.

Supply and fixing in renewal of seat cushion of chair dining made of 75 mm thick 40 Kg/Cum density foam with tapestry cloth in proper size & shape, complete all as shown and specified on drg. Note :- The tapastry cloth shall not be less than Rs. 400/- per metre and of design/pattern as approved by the Engineer in Charge.

M&L for applying high gloss french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces (new and old parts), complete all as specified and directed.

Chair Varandah (PVC Seat and Back), Drg No.FD/MAP-II/06

S & F in renewal of 4 mm thick PVC seat and back of chair varandah in proper size, (Weight of seat or back shall not be less than 1.85 kg each) complete all as specified and shown on drg. Make of seat and back :- Amko/ Confo/ Harmony or Equivalent as approved by the GE.

Supply and fixing in renewal of new Hard PVC shoe of superior quality of chair verandah, complete all as specified and shown on drg.

M&L for preparation of old painted surface of frame of chair verandah and applying one coat of 1st quality synthetic enamel white paint, complete all as specified and directed.

M & L for electric welding to broken frame of chair verandah, including removing the unwanted welding spot and making good burnt finishing by applying one coat of red oxide primer and over it applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F in renewal of leg of chair verandah made of 20 mm dia MS conduit pipe of 1.6 mm wall thickness (U shape), duly welded with existing shape and size including applying one coat of synthetic enamel paint over a coat of red oxide zinc chromate primer after preparation of surfaces, complete all as specified and as shown on drawing.

Receptacle with bucket, Drg No.FD-1044

Supply and fixing in renewal of top of receptacle made out of GI sheet of 22 guage thickness, shape and size as shown on drgs, complete all as specified and directed.

Supply and fixing in renewal of new GI bucket made out of GI sheet of 22 guage thickness, shape and size as shown on drg, complete all as specified and directed.

M & L for preparation of surface of receptacle frame with bucket and applying one coat of 1st quality synthetic enamel paint aluminium/smoke grey (spray painted), rest all as shown on drg and as directed.

Box Kit Steel, Drg No.FD-98 (M)

M & L for repairs of box kit steel covered holes with 1mm MS sheet fix with proper riviting, including applying of a coat of red oxide primer rest all as shown on drg and as directed.

Supply and fixing in renewal of handle 100mm long in best quality, rest all as shown on drg and as directed.

Supply and fixing in renewal of hasp and staple in proper size and best quality, rest all as shown on drg and as directed.

Supply and fixing in renewal of hinges 75 mm in proper size, rest all as shown on drg and as directed.

Removal of existing worn out painting from in side & outside and including preparation of surface frame complete of the box kit steel and M&L for applying two coats of 1st quality synthetic enamel paint black/OG (spray painted) over a coat of red oxide primer, rest all as shown on drg and as directed.

Table dressing ladies with mirror incl stool Drg No. FD/MAP-II/07

Supply and fixing in renewal of 5 mm thick mirror of table dressing ladies, fixed with TW (25x20mm) all around mirror frame size as shown on drawing, complete all as specified and dircted.

Supply and fixing in renewal of back ply of mirror of table dressing ladies made out of 6 mm thick commercial type BWR grade plywood of same size duly fixed all as shown and specified on drg.

Supply and fixing in renewal of shelf (upper of stool) of table dressing ladies made of 17/18 mm thick prelaminated MDF board, both side laminated with natural teak face including L type (patti), exterior grade including 4 mm thick TW edging of size and shape all as specified and shown in drg.

Supply and fixing in renewal of stainless steel handle of table dressing ladies in best quality, shape and size all as shown and specified on drg.

Supply and fixing in renewal of front side of stool of table dressing ladies made of 17/18 mm thick prelaminated MDF board, both side laminated with natural teak face, exterior grade including 4 mm thick TW edging of size and shape all as specified and shown in drg.

Supply and fixing in renewal of rear side (size 1150x480mm) of stool of table dressing ladies made of 17/18 mm thick prelaminated MDF board, both side laminated with natural teak face, exterior grade including 4 mm thick TW edging of size and shape all as specified and shown in drg.

Supply and fixing in renewal of wheel of stool of table dressing ladies with new nylon wheel in best quality, shape and size all as shown and specified on drg.

Supply and fixing in renewal of cushion of stool of table dressing ladies made of 75 mm thick foam cushion 40 Kg/Cum density covered with approved quality tepastry cloth, size and shape all as specified and shown in drg.

S&F in renewal of sliding/telescopic channel of table dressing ladies with new sliding channel of approved quality (replace in pair), complete all as specified and shown on drawing.

Supply and fixing in renewal of shutter of table dressing ladies made of 17/18 mm thick prelaminated MDF board, both side laminated with natural teak face, exterior grade including 4 mm thick teak wood beading alroung, of size and shape all as specified and shown in drawing.

Supply and fixing in renewal of magnetic catcher with stainless steel (one No per shutter) of table dressing ladies in best quality, shape and size all as shown and specified on drg.

Supply and fixing in renewal of hinges in shutter of table dressing ladies with new piano hinges in best quality, of size and shape all as specified and shown in drg.

Supply and fixing in renewal of back side of box of table dressing ladies made of 17/18 mm thick prelaminated MDF board, both side laminated with natural teak face, exterior grade including 4 mm thick teak wood beading alroung, of size and shape all as specified and shown in drawing.

Supply and fixing in renewal of left/right side of box of table dressing ladies made of 17/18 mm thick prelaminated MDF board, both side laminated with natural teak face, exterior grade including 4 mm thick teak wood beading alroung, of size and shape all as specified and shown in drawing.

Supply and fixing in renewal of left/right inner side of box of table dressing ladies made of 17/18 mm thick prelaminated MDF board, both side laminated with natural teak face, exterior grade including 4 mm thick teak wood beading alroung, of size and shape all as specified and shown in drawing.

Supply and fixing in renewal of bottom of box of table dressing ladies made of 17/18 mm thick prelaminated MDF board, both side laminated with natural teak face, exterior grade including 4 mm thick teak wood beading alroung, of size and shape all as specified and shown in drawing.

M&L for applying high gloss french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces, complete all as specified and directed.

Table dining 1200 x 900 mm / 4 Persons Drg No. FD/MAP-II/03

Removing of old unserviceable following parts from table dining 4 person and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints and applying french polishing on all exposed wooden surfaces & including cleaning and preparing the surface & including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - Legs

Long Rails (Front / Back)

Side rails ( Left / Right)

S&F in renewal of Top of Table dining 4 pers made out of 17/18 mm thick Prelaminated particle board exterior grade, ISI marked, one side teak finish and other side balancing white duly fixed with 4 mm thick first class hard wood (teak wood) beading allround the top, fixed with steel screw, all as shown and specified on drg.

S&F in renewal of superior quality hard PVC shoe of Table dining 4 pers, complete all as specified and shown on drg.

M&L for applying high gloss french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces (new and old parts), complete all as specified and directed..

Table Dressing Gents (MAP) Drg No.FD/E6/MAP/16

Supply and fixing in renewal of 5 mm thick mirror of table dressing gents (MAP), size as shown on drawing, complete all as specified and dircted.

Supply and fixing in renewal of back ply of mirror of table dressing gents (MAP) made out of 12 mm thick commercial type BWR grade plywood of same size duly fixed all as shown and specified on drg.

M & L for fixing of table dressing gents (MAP) including screw and gitti in MD Accn complete all as specified and dircted.

M&L for applying high gloss french polishing including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces, complete all as specified and directed.

TV Trolley, Drg No. FD/E6/MAP/04 (R )

S&F in renewal of Top of TV trolley made out of 18 mm thick Prelaminated particle board exterior grade natural teak face, ISI marked, both side laminated duly fixed with & including PVC edging beading allround the top, fixed with steel screw, all as shown and specified on drg.

Supply and fixing in renewal of 5 mm thick glass shutter of TV trolley, of same size including push type magnetic catcher duly fixed, complete all as shown and specified on drg.

Supply and fixing in renewal of handle of shutter of TV trolley with new brass handle in best quality, shape and size all as shown and specified on drg.

Supply and fixing in renewal of castor swivel type wheel of TV Trolley, best quality, shape and size all as shown and specified on drg.

Supply and fixing in renewal of approved quality sliding/telescopic channel of TV trolley, approved quality, shape and size (replace in pair) all as shown and specified on drg.

Supply and fixing in renewal of PVC beading of superior quality of TV Trolley, best quality, shape and size all as shown and specified on drg.

SNEH CORPORATION

PRAFUL ENTERPRISES

B.S Constructions

L.BHIMSEN

SK INDUSTRIES

M/S CHANDER SHEKHAR

Budget Furniture Industries