Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 LAccepted-Finance | ₹1.6 L | L1 | Accepted-Finance L1 |
| 2 | L2₹1.8 L+₹17,800 (10.9%)Accepted-Finance | ₹1.8 L+₹17,800 (10.9%) | L2 | Accepted-Finance L2 |
| Sl No | Description | Qty | Unit | Javed Khan L2 | Manjit Contractor L1 |
|---|---|---|---|---|---|
| 1.00 | Providing and installing of Mono submersible pump set of KSB/ Crompton make 2C/25 confirming to ISI 9034-1976 along with a directly coupled submersible type squirrel case electric induction motor suitable for operation on 440 V, three phase 50 CPS. AC supply with water lubricated bearings, provided with pivoted segment type thrust bearings to with stand vertical pressure with minimum wear and tear and dully fitted with with device to take up the expansion of water with heating of motor complete in all respect
Total Head: 89.38 Mtr
Discharge: 45 LPS | 2 | P/HP | 25,000 ₹50,000 | 22,000 ₹44,000 Lowest |
| 2.00 | Providing and fixing three phase MS panel box along with panel board of BS/ L&T make with Amp meter, volt meter, over load relay, kit kat, indicator set MCCB etc.complete in all respect and to the entre satisfaction of the Engineer-in-charge | 1 | Each | 20,000 ₹20,000 | 18,000 ₹18,000 Lowest |
| 3.00 | Supply and fixing of submersible cable 2.5mm2 (three core) submersible cable of L&T/Havells make in all leads and lifts | 120 | Mtr | 200 ₹24,000 Lowest | 250 ₹30,000 |
| 4.00 | Providing and fixintg rope with 6mm2 dia suitable to wear the weight of submersible motor pumps set and Gl pipe etc. including in all leads and lifts | 60 | Mtr | 100 ₹6,000 | 80 ₹4,800 Lowest |
| 5.00 | Excavation in foundation, frenches etc in earthwork in all kind of soil such as pick work, jumper work blasting hard or soft soil, lift up to 1.50 mtr. Stacking the excavated soll not more than 3 mtr. Clear from the edge of the excavation and then retuming the stacked soil in 15 cm layers, when required in to plinth side of foundation etc. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed with in a lead of 20 mtrs and as per entire satisfaction of Engineer-In-Charge | 90 | Cum | 500 ₹45,000 | 400 ₹36,000 Lowest |
| 6.00 | Laying, Jointing and testing galvanized mild steel tube screwed and socketed in trenches of 32mm dia including tube fittings such as bends, tees, reducers, unions etc. complete and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for seperately). | 200 | Rmt | 40 ₹8,000 Lowest | 40 ₹8,000 Lowest |
| 7.00 | Providing horizontal nipple connected for submersible pump pand PVC riser pipe in all leads and lifts and to the entire satisfaction of Engineer-in-Charge. | 1 | Each | 1,500 ₹1,500 | 900 ₹900 Lowest |
| 8.00 | Providing laying jointing and testing of lowering in bore ng of lowering in bore 32mm dia PPR pipe 16 SDR 7.4 as standard ISI make including all leads and lifts and to the entire satisfaction of the Engineer-in-charge. | 40 | Rmt | 300 ₹12,000 Lowest | 310 ₹12,400 |
| 9.00 | Earthing with Gl earth plate 600mmx600mmx6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt complete as required. Extra for using charcoal and salt for GI or copper plate earth electrode as required. | 1 | Mtr | 15,000 ₹15,000 | 9,600 ₹9,600 Lowest |
Tender Value
₹1.4 L
EMD Value
₹2,775
Closing Date
24 Jan 2026, 3:00 pmClosed
EE JSV Division Jagatkhana
EE JSV Division Jagatkhana
(SH. Energization of hand pump near small bridge in village Jandori under GP Rour Jaman).
2026_HPIPH_125711_1
NIT-JGT-12577-12676 dt 13.01.2026
Open Tender
Pumps/Motors
Item Rate
60 days
Swarghat
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
₹2,775
8 Apr 2026
14 Jan 2026
24 Jan 2026
14 Jan 2026
24 Jan 2026
14 Jan 2026
Providing and installing of Mono submersible pump set of KSB/ Crompton make 2C/25 confirming to ISI 9034-1976 along with a directly coupled submersible type squirrel case electric induction motor suitable for operation on 440 V, three phase 50 CPS. AC supply with water lubricated bearings, provided with pivoted segment type thrust bearings to with stand vertical pressure with minimum wear and tear and dully fitted with with device to take up the expansion of water with heating of motor complete in all respect Total Head: 89.38 Mtr Discharge: 45 LPS
Providing and fixing three phase MS panel box along with panel board of BS/ L&T make with Amp meter, volt meter, over load relay, kit kat, indicator set MCCB etc.complete in all respect and to the entre satisfaction of the Engineer-in-charge
Supply and fixing of submersible cable 2.5mm2 (three core) submersible cable of L&T/Havells make in all leads and lifts
Providing and fixintg rope with 6mm2 dia suitable to wear the weight of submersible motor pumps set and Gl pipe etc. including in all leads and lifts
Excavation in foundation, frenches etc in earthwork in all kind of soil such as pick work, jumper work blasting hard or soft soil, lift up to 1.50 mtr. Stacking the excavated soll not more than 3 mtr. Clear from the edge of the excavation and then retuming the stacked soil in 15 cm layers, when required in to plinth side of foundation etc. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed with in a lead of 20 mtrs and as per entire satisfaction of Engineer-In-Charge
Laying, Jointing and testing galvanized mild steel tube screwed and socketed in trenches of 32mm dia including tube fittings such as bends, tees, reducers, unions etc. complete and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for seperately).
Providing horizontal nipple connected for submersible pump pand PVC riser pipe in all leads and lifts and to the entire satisfaction of Engineer-in-Charge.
Providing laying jointing and testing of lowering in bore ng of lowering in bore 32mm dia PPR pipe 16 SDR 7.4 as standard ISI make including all leads and lifts and to the entire satisfaction of the Engineer-in-charge.
Earthing with Gl earth plate 600mmx600mmx6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt complete as required. Extra for using charcoal and salt for GI or copper plate earth electrode as required.
stage.html
html • 0.04 MB
technical_185276.pdf
techsummary_185276.pdf
finance_185276.pdf
BOQ Comparative Chart
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.33 MB
PWD6.pdf
Tender Documents • 0.68 MB
PWD8.pdf
Tender Documents • 1.31 MB
TC.pdf
Tender Documents • 0.45 MB
BOQ_185276.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .