DEPOSIT Jilla Panchayath DepositDrilling Borewell Precast Pump house Motor and laying63mm PVC line at Kunnamkadu Ambalapadu in Koduvayur Grama panchayath General Civil Work

Amount

Construction of RCC Pump house and motor errection

OD152011/2022-2023: Supply and installation of reinforced cement concrete prefabricated cabin pumphouse to measure 2*2 m inside with RCC roof gabled or flat having one door 2 nos, ventilators using RCC grills including the supply and erection of RCC post 2 Nos. of size 10*10*200 cm, for fixing the panel board including the cost and materials transportation etc. foundation with RR masonry 1:6 cement mortar, 45 cm*30 cm below ground level and 30*30 cm above ground level flooring with cement concrete 1:4:6 and over plastering with cement mortar 1:4 12 mm thick and trowelled smooth etc.complete and also plastering the 1:4 cement mortar at all the RCC post inside and out side face of pump house providing one armed moulded plastic chair finishing wall with proof cement paint two coat and superscribing the name of scheme on the wall using approved quality enamel paint 1 No

OD152090/2022-2023:Providing KSEB Connection to Pump house

OD152091/2022-2023:Charges for 3phase KSEB line extension up to 100m including cost of electrical post ,wire ect complete

Supplying and Laying of PVC line extension

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.9.6:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 63 mm nominal outside diameter pipes.

100.9.7:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 75 mm nominal outside diameter pipes.

100.12.6:Conveying and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc., but excluding cost of pipes and fittings for External work: 50mm diameter nominal bore.

100.98.211:Supply of PVC Pipe, 6kg/cm2, 63mm Dia.

100.98.212:Supply of PVC Pipe, 6kg/cm2, 75mm Dia.

OD152207/2022-2023:Supplying of 50mm GI Pipe (Meadium)DLPC

OD156677/2022-2023:Supplying of PVC Specials 3% of cost of pipe

OD156685/2022-2023:Supplying of GI Specials 5% of cost of pipe

18.17.5:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

18.17.4:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

RENJITH K

D VINAYAKA MOORTHY

Bidder Name

M SIVADAS

D VINAYAKA MOORTHY

RENJITH K