Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.7 LAccepted-AOC H NO 1366 3 GALI NO 6 MATA ROAD NEAR HAPPY MODEL SCHOOL RAJIV NAGAR GURGAON 122 001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L1 | Accepted-AOC CA Amount | |
| 2 | L2₹39.8 L+₹2.5 L (6.77%)Rejected-Finance C 9 53 SECTOR 8 ROHINI NEW DELHI 110085 | NEW DELHI | NEW DELHI | DELHI | 110085 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹43.6 L+₹6.4 L (17.1%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹43.8 L+₹6.5 L (17.4%)Rejected-Finance | L4 | Rejected-Finance Other than L1 |
Tender Value
₹40.8 L
EMD Value
₹81,600
Closing Date
13 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE P DDN
GE P Dehradun
PETTY REPAIR TO OTM/MD ACCN UNDER AOR OF AGE CHAKRATA UNDER GE (P) DEHRADUN.
2023_MES_580603_1
GE P/DDN/04 OF 22-23
Open Tender
Civil Works
Item Rate
270 days
Chakrata
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE P DDN
₹81,600
Yes
23 May 2023
13 Feb 2023
20 Mar 2023
14 Feb 2023
13 Mar 2023
27 Feb 2023
Amount
Demolition of brick /stone work , built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed.
M&L Brickwork old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
M&L Brickwork old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level) and removing the debris outside from defence land complete all as specified and directed .
Material and labour for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed.
M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed.
M&L 20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills, cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and directed. Note:- The stone slab shall be in one piece over kitchen platform, window cill and making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded.
M&L for coloured Glazed ceramic tiles in vertical surface such as dado etc 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete (required in patches not exc 2 Sqm to be done in daily complaints) all as specified and as directed. Note:-The texture, colour, Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.
Supply and fix joint free non skid coloured Ceramic tiles 08mm to 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete (required in patches not exc 2 Sqm to be done in daily complaints) all as specified and directed. Note :-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.
Supply and fix in repair Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete (required in patches not exc 2 Sqm to be done in daily complaints) all as specified and directed. Note:-The texture, colour, Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.
Supply and fix in repair Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete (required in patches not exc 2 Sqm to be done in daily complaints) all as specified and as directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.
Demolition of Roofs, floors (other than ground floors), beams staircases, landing, cooking platform ,chajjas, & similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) and disposal of debris out of MoD land complete all as specified and directed. Note:- Demolition will be done only by mechanical cutter only .
Material and labour for RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like such as cover slab of septic tank/soak well etc complete all as specified and as directed . Note:- Reinforcement shall be measured and paid separately).
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) rough finished surfaces of concrete flat complete all as specified and as directed
Material and labour for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.
Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and as directed.
Material and labour for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement (required in patches not exc 2 Sqm to be done in daily complaints) including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed. (Note:- WPC shall be measured and paid separately)
M&L for Preparing newly plaster surfaces & applying two coats of cement base paint over one coat of cement primer complete all as specified & directed.
M& L for preparing old plaster or unplastered wall surfaces including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke soot, moulds and efflorescent salts and treating oily and greasy spots etc and applying two coats of Premium water proof cement paint for external services without any brush marks on the surfaces complete all as specified and directed. Note :- All painted areas site shall be cleaned and hand over as earlier without any extra cost to Govt.
Material and labour for rendering 10 mm thick in CM 1:6 on other than fair faces of brick work, concrete surfaces of wall, finishing surfaces even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs if required complete (required in patches not exc 2 Sqm to be done in daily complaints) complete all as specified and as directed.
Material and labour for preparation of newly plastered internally surfaces of wall and applying a one coat of wall care putty on the surfaces & making the surface absolutely smooth surface and applying two coats of distemper oil emulsion over one coat of cement primer (as per manufacturer's recommendation) finished without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE, complete all as specified and directed. Note : All painted areas site shall be cleaned and hand over as earlier without any extra cost to Govt.
Material and labour for complete removal of existing treatment internally surface of wall and applying one coat thick wall care putty on the surfaces and making surface absolutely smooth and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion without any brush marks on the surface in any tint including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE, complete all as specified and as directed. Note : All painted areas site shall be cleaned and hand over as earlier without any extra cost to Govt.
Material and labour for complete removal of existing treatment internally surface of wall applying two coats of distemper oil emulsion over one coat of primer (as per manufacturer's recommendation) without any brush marks on the surface in any tint including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE, complete all as specified and as directed. Note : All painted areas site shall be cleaned and hand over as earlier without any extra cost to Govt.
M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.
Material and labour for complete removal of existing treatment from ceiling surface and applying two coat of white wash on undecorated surfaces without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.
Material and labour for preparation of old painted steel and iron surfaces of any description over 10 centimeter width or girth and applying one coat of synthetic enamel paint in any colour finished without brush mark on surface including necessary scaffolding up to four storeys height of bldgs if required, Shade/colour shall be approved by GE, complete all as specified and as directed. Note : All painted areas site shall be cleaned and hand over as earlier without any extra cost to Govt.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed.
Material and labour for cutting down plants / trees of girth not exc 15 cm & surface are not exc 0.36 Sqm each from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine )and making good to suit the adjoining surfaces using PCC 1:2:4, type B-O or cement mortar 1:2 complete all as per manufacturer instructions and as specified. Note: Any CI/GI/PVC pipes and fittings damaged during work shall be replaced by new one to insure leakage / seepage free joint without any extra cost to the department and Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc, hoisting, lowering and protective measures etc up to four storeys height of bldgs and removing of debris out of MoD land complete all as specified and as directed.
Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the frame) complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exc. 1.5 Sqm each and removing from site.
Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and removing from site complete all as specified and directed.
S&F IInd class hard wood, 35mm thick skeleton shutters open rebated & prepared to receive, glass, gauge etc. (without sash bars), edge of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkhats. Complete all as specified and directed.
S&F pressed steel frames 105 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate including one shop coat of primer complete all as specified and directed
S&F pressed steel frames 125 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate including one shop coat of primer complete all as specified and directed
M&L for PCC 1:3:6 type C-0 (using 12.5 mm graded crushed stone aggregate) as in back filling of hollow portion of frame with plain cement concrete and for fixing of hold fast complete all as specified and directed.
Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.
Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.
Supply only 3 mm thick sheet glass ordinary quality and glazing with oil putty wire clips in square n.exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed.
Supply and fix in repair 3mm thick figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
M&L for preparation of previously untreated surfaces old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified.
Supply & fix solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying fixing in opening as per specification & drawing complete all as specified & directed.
Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC, ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II).
S&F steel window/Ventilator factory made out of box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills, glazing (glass) , gauging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts) and two coat synthetic enamel paint over a coat of red oxide primer including taking down old windows all as specified and directed by Engr-in-Charge.
M&L repairing of Hinges in old steel windows for repairing or welding drilling out old bolts or set screws as required. including repairing for handle peg stag, wire mesh and glass change, painting one coat etc as serviceable condition as per directed by Engr-in Charge.
M&L repairing of Hinges in Old doors for repairing or welding drilling out old bolts or set screws as required. Including repairing for handle, Hinges, wire mesh, and etc including painting one coat etc as serviceable condition as per directed by Engr-in Charge.
S&F hydraulic concealed hinge with clip on installation and integrated Silent System, opening angle not less than 100º, For shutter thickness 15 - 24 mm full overlay type shutters, hinge cup dia 35 mm including necessary fixing arrangement with SS screw complete all as specified & directed. Make: Hettich cat No Onsys 4447i product code 928143200 /Kaff nickel plated SC hinge 100°code No KHSC-0/Godrej product code :6933, Baan code LKYAHCHR4
S&F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for kitchen, cupboards. The laminated shutter should be prelaminated side with different design and other side plain white of density not less than 600 kg /cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed. Make : Kumar Arch Tech put ltd/Rajshree/iber Techno Products / Eco Cell / TVL Engineering Pvt Ltd (Floresta)
S&F for ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.
Supply and fix 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and directed
Supply and fix hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in mm 100 complete all as specified and directed.
S & F 200 mm Mild steel tee hinges, stove enameled black medium type and fixed complete all as specified and directed
Supply and fix stainless steel butt hinges of size 100mm long for fixing of pace door shutter etc complete all as specified and directed.
Supply and fix in repair Mild steel butt hinges of size 100mm long for fixing of chowkhat including welding and fixing etc complete all as specified and directed.
Supply and fix Aluminum, anodized, barrel tower bolts of extruded section and fixed, Length of bolt in 150mm complete all as specified and directed
Supply and fix Aluminum, anodized, barrel tower bolts of extruded section and fixed, Length of bolt in 200mm complete all as specified and directed
Supply and fix in repair Aluminum, anodized, barrel tower bolts of extruded section and fixed, Length of bolt in 150mm complete all as specified and directed
Supply and fix in repair Aluminum, anodized, barrel tower bolts of extruded section and fixed, Length of bolt in 200mm complete all as specified and directed
Supply and fix Aluminum handles, cast type anodized Size of handle in 150mm complete all as specified and directed.
Supply and fix in repair Aluminum handles, cast type, anodized Size of handle in 150mm complete all as specified and directed.
Supply and fix in repair Aluminum handles, cast type, anodized Size of handle in 125mm complete all as specified and directed.
Supply and fix Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed Length of bolt in 250 mm complete all as specified.
Supply and fix in repair Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed Length of bolt in 250 mm complete all as specified.
Supply and fix Floor door stopper of aluminum alloy body and tongue, anodized, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and directed.
Supply and fix in repair Floor door stopper of aluminum alloy body and tongue, anodized, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and directed.
Supplied and fixed 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding to steel frames complete.
Supplied and fixed in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding to steel frames complete.
Supply and fixing in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel rings with 50 mm dia and proportionate for part there off, with stainless steel brackets near to ends with stainless steel finish for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings)
Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.
Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.
Supply and fix 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.
Fixing only 15mm bore old Steel water tubing including all new galvanized fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. Note: - Old Steel water tube/pipe any type retrieved from taking down shall be used along with all new GI fittings)
Supply and fix 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.
Fixing only 20mm bore old Steel water tubing including all new galvanized fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed. Note: - Old Steel water tube/pipe any type retrieved from taking down shall be used along with all new GI fittings)
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed
Supplied and fixed in repair Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe
Supplied and fixed in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe
Supply and fix rotational moulded polyethylene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old broken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.
Supplied and fixed Rotational moulded polyethylene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old Brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.
Supply and fix in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 20mm-210 gms)
Supplied and fixed in repair PVC tank lid/cover for water storage tank of 500 ltrs capacity with fixing arrangement complete all as specified and directed.
S & F in repair 15 mm bore long body CP Bib taps cast copper alloy fancy type with capstan heads (chromium plated),and cup screwed down , high pressure for iron pipe complete all as specified & directed.
Supply and fix in repair CP stop cock/angle valve cast copper alloy screwed down high pressure ,with crutch or butterfly handle screwed both ends for iron pipe or for union of 15 mm bore complete all as specified & directed
Supplied and fixed in repair stop valves (ISI marked), 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup(concealed type) screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.
Supplied and fixed in repairs Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and as directed
Supply and fix for in repairs Swan neck CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.
Supply and fix in repairs Brass CP shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed.
Supply and fix in repairs Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
Supply and fixing in repair Vitreous China wash down water closet pan including P or S trap of bore 125/110 mm (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed.
Supply and fixing in repair vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as directed.
Supplied and fixed in repairs 10 ltrs capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with Intel, ball valve, float and handle including brackets ,flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and as directed.
Supplied and fixed in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps etc but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.
Supplied and fixed in repair sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe overall size 915 mm x460 mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair Stainless steel plate rack(Utensil Rack) of size (900mm x 750mm x 250mm) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts, bolts & washers complete all as specified and as directed.
Supply and fix in repair 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes.
Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar, and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm
Supply and fix PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed.
Supply and fix PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed.
Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipe including all fittings ,heads shoes, bends etc including removal to store, Internal dia of pipe in 75MM/110mm complete all as specified and directed all as specified and directed.
Supply and fix PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed.
Supply and fix PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed.(ISI MARKED)
Supply and fix PVC (SWR) bends any radius 75mm dia all as specified and directed. (ISI MARKED)
Supply and fix PVC (SWR) bends any radius 110mm dia all as specified and directed. (ISI MARKED)
S&F in repairs 75mm PVC floor trap, ISI marked with cp grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed.
Supply and fix in repair PVC (SWR) bends any radius 75mm dia all as specified and directed. (ISI MARKED)
Supply and fix in repair PVC (SWR) bends any radius 110mm dia all as specified and directed. (ISI MARKED)
S&F in repairs 75mm PVC floor trap, ISI marked with cp grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed.
S&F in repair Bib tap15 mm standard of PTMT any colour screwed for iron pipe (Minimum weight 15mm-90gms)
S&F in repair 15 mm Stop valve of PTMT any colour high reassure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms)
S&F in repair15 mm pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms
S&F in repair Grating doom 100mm dia of PTMT Minimum weight 25gms
S&F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms)
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm
S&F in repairs suitable brass spindle /disk big size (Min weight 75 Grams) for 15mm dia stop cock/bib cock/pillar cock etc complete all as specified and directed.
S&F in repair Door cill powder coated aluminum of 900mm size screwed down to shutters complete all as specified and directed.
S&F in repairs cast iron bib taps, 15mm bore screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
S&F in repair soap dish 160mm (min weight 390 grams) length of stainless steel fixed to wall complete all as specified and directed
S&F in repair CP toilet paper holder complete all as specified and directed
S&F in repairs CP brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore pipe complete all as specified and directed.
S&F in repairs 15mm dia CP Health faucet with flexible pipe not less than 90 cm long fixed to EWC suitable complete all as specified and directed at site
Supply and fixing in repairs looking mirror with PVC moulded frame and hard board back (colour of frame as directed) of size 450mm x 600mm x 6mm thick complete all as specified and directed.
S&F of MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F in repair door closer hydraulically regulated, designation No. 3, universal type, Aluminum body suitable for door shutter of 851 to 1000mm in width & of weight between 61 to 81 kg & fixed
Replacement of old fitting any type with Waste coupling PVC for wash hand basin with long screwed shanks and fly nuts fixed in repair 32mm bore.
Replacement of old fitting any type with Waste coupling PVC for wash hand basin with long screwed shanks and fly nuts fixed 40mm bore.
Replacement of old fitting any type with32mm Waste coupling brass, chromium plated suitable for steel sink including strainer etc complete.
S&F in repair PVC waste pipe flexible including PVC waste coupling with minimum length 800mm, 32mm bore Make : Paryag
S&F in repair PVC waste pipe flexible including , 32 mm bore for urinal and kitchen sink with all cups and sockets complete all as approved by Engineer-in-charge
S&F in repair internal fitting of low level cistern and refixing after repairing of parts of internal fitting kit including like PVC washer, float valve, siphon etc complete
S&F in repair Plastic water closet seat cover, white closed pattern with flat bottom and cover and Brass chromium plated hinging device.
S&F in repair flush pipe of polyethylene of low or high density of PVC, 32mm dia for low level cistern
S&F in repairs of floor spring for Aluminum door shutters by removing door and fixing in same position complete all as directed and specified
Dismantling of plain or corrugated, steel sheet any gauge thickness including Nainital or similar pattern roof covering etc complete all as specified and as directed.
Dismantling timber scantling 40 Sq cm and over in section, in any position framed work.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L Structural steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters and rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250) quality B complete all as specified and directed.
Supply and fix Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing/cooler stand including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.
Cutting holes in brick walls built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc Half brick but not exc one brick complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and as directed. Note: - Finishing surfaces of concrete to be even and rough to receive the topping layer.
M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as per specified and directed.
Material and labour for Coloured machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade rubber moulded glossy finish with grey cement and pigment complete all as specified and as directed. Note: Shapes of interlocking paver block shall be triangular/Zigzag/Hexagon/or other, Colour of paver blocks & laying pattern approved by GE.
M&L for sand filling under floors or in foundations including watering and consolidation or layer of sand cushioning below interlocking paver block complete all as specified and as directed.
M&L for 100mm thick cement concrete type B-2 1:2:4 (using 40 mm graded stone aggregates) as in floors Complete all as specified and directed.
Supply only 38 mm wide and 3 mm thick glass dividing strips in flooring by fixing in position and making square or rectangle for casting concrete in flooring.
S&F 35 mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. ommercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure reated
Amit Associates
MOHAN SINGH AND SONS
Ram Naresh Singh Sikarwar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .