Construction & Development of GTMC road At Jamnagar.

Estimated Rate (Inclusive 1%

No. Description of work Rate Amount

Unit Quantity Labour Cess)

DEVELOPMENT WORK

Excavation for foundation upto 1.5 m

depth including

sorting out and stacking of useful

materials and disposing

off the excavated stuff upto

Meter lead.(A) Loose or soft soil Cu.M 9180.00 252.61 255.14

Filling available excavated earth

(excluding rock) in

trenches. plinth, sides of foundations

etc. in layers not

exceeding 20 cm. in depth

consolidating each disposited

2 layer by ramming and watering. Cu.M 5508.00 136.11 137.47

Filling in foundation and plinth with

murrum or selected

soil in layers of 20cm. thickness

including watering,

ramming and consolidating etc.

Supplying of crushed stone Cu.M 3672.00 301.58 304.60

aggregates, chippings etc. of hard

stone of following nominal size free of

disintegrated pieces

deletarious and oraganic mater (for

Bitumen surface dressing

etc.) and grading as per I.R.C. Code.(i)

Spreading the stone aggregate for

rolling and W.B.M.

including filling the interstices to

required camber and

gradient (excluding spreading of

Blindage)(iii) 25mm to 50mm

5 size crushed stone Cu.M 1440.00 265.83 268.49

Providing and laying cement concrete

1:2:4 (1-Cement : 2-

coarse sand : 4- hand broken stone

aggregates 40 mmnominal

size) and curing complete excluding

cost of formwork in (A)

6 Foundation and Plinth Cu.M 1192.80 3765.41 3803.06

Providing & Fixing 100mm thk. 75 x

75mm RED SAND STONE cobble stone

7 flooring over cement mortar including

fixing the same in line, level and joint Sq.M 5159.85 3200.00 3232.00

filling, cleaning

Providing complete

and fixing as directed

pre-cast concrete

kerb stone of gray

cement based concrete block 30cm

length,30cm height and

15cm thick of M250 grade concrete

(Kerb Stone Equivalent to VYARA) as

per approved design

and including excavation for fixing in

proper line and

level,filling the joint with C:M 1:3

(1cement:3fine sand) etc

Brick work using common burnt clay

building bricks having

crushing strength not less than

kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine

9 sand)(A) Modular Cu.M 538.20 4521.82 4567.04

Providing 15mm thick cement plaster

in single coat on Rough

(Similar)side of single or half brick

walls for interior

plastering upto floor two level and

finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-

Providing & Laying Red Agra 25mm

ston slab cladding on plaster surface

single polished stone slab of selected

11 quarry fitting the same in line & level Sq.M 2340.00 2250.000 2272.50

and in proper size

Distempeing (Twoas directed

coats) by the oil

bound distemper of

approved brand and manufacture and

of required shade on

wall surfaces to give an even shade,

over and including a

priming coat with distemper primer of

12 approved brand and

manufacture after thoroughly

brushing the surface free

from mortar dropping and other

foreign matter and also

including preparing the surface even

and sand papered

Providing & Laying Farm yard manure

in layers as directed by the EIC.

Selected soil in 10cm layers to be

Providing & Fixing CI Cast Iron poles

for barricade at regular intervals in

medain gap incl. of all fittings &

fitments complete as per the design &

details incl. of one coat of zinc

chromite as priming coat & two coats

of approved oil paint.

Providing & Fixing CI cast iron benches

(frame of CI and back and seat to be

15 laid by 50mm thk. teak wood planks)

incl. of second class indian teak wood.

Providing & Fixing Sand stone slab

75mm thl. Slab for signages with

engraving letters as per the design &

details in dhrangdhra stone as

directed by the EIC. (Size 0.90 *

Providing & Fixing Sand stone

sculpture (1.22 x 0.60 x 0.60 meter) as

per the design & details in dhrangdhra

stone as directed by the EIC. Incl. of

brick masonary, plastering the same,

CC platform etc. all complete for otta

size 600 x 600mm

SITC of Drip Irrigation line with all

18 hardware & fittings complete as

directe dby the EIC. Rmt. 1200.00 15.00 15.15

Design, Manufacturing and Supplying

factory-made RCC (wet cast) Precast U-

shape drains of T-25 category for use

in stormwater drainage, cable

trenching, or utility ducts,

manufactured by FUJI Silvertech / FIT,

having dimensions of 900mm Width x

900mm Depth (in mm) and a length of

2000 mm, with a load-carrying

capacity of 10 Tonne Axle Load and

Tonne Wheel Load, suitable for heavy

vehicular movement of longitudinal

drain. Each drain shall have tie-shaped

19 grooves (10–20 mm width and 25 mm

depth) on both ends for proper joint

alignment and secure placement. The

drains shall be manufactured using

minimum C40 grade concrete duly

steam cured for durability, OPC

Grade cement with admixtures as per

IS:456-2000, and coarse and fine

aggregates derived from natural

sources. Reinforcement shall be with

TMT/TMX bars of Fe 500D or higher,

conforming to IS:1786, fabricated

using in-house automated cage-

making units for consistency. RO Rmt. 1200.00 11370.00 11483.70

Precastshall be usedErrection

Element during including

Earthwork excavation, PCC, Dry

Bedding, Unloading, Installation and

Jointing with Non-shrink grout

20 material., Errection - Supply 1000 x

1000 mm (into in dimension from top)

(Rate including all cost of materials,

Labour, hydra, )

Supplying RCC (wet cast) factory-made

Precast T-25 lid cover with hole,

manufactured by FUJI Silvertech / FIT

for storm water drain, cable trench, or

utility duct of size 1050mm Width x

500mm Length x 150mm Thickness,

with anti-skid finish on the top

surface. Each lid shall be provided with

two standard slits of 155 mm x 20 mm

along the width for storm water

discharge and must have a load-

carrying capacity of 10 Tonne Axle

Load and 5 Tonne Wheel Load,

21 suitable for heavy vehicular

movement over longitudinal drains.

The lids shall be manufactured using

minimum C40 grade concrete, duly

steam cured for enhanced durability,

with OPC 53 Grade cement and

admixtures as per IS:456-2000, and

aggregates derived from natural

sources. Reinforcement shall be with

TMT/TMX bars of Fe 500D or higher,

conforming to IS:1786, fabricated

using automated in-house cage-

making units for consistent quality. RO

water shall be used throughout the Rmt. 1200.00 4760.00 4807.60

manufacturing process to ensure long-

Supplying factory-made RCC (wet cast)

Precast FT Flume Drain category for

use in stormwater drains, Canal,Power

and telecommunication cable ducts

and utility ducts, manufactured by

FUJI Silvertech / FIT / Alcock, having

dimensions of 1000 Width x

Depth (in mm) and a length of

mm. The load-carrying capacity of

Tonne Wheel Load for pedestrian

movement. Each drain shall have tie-

shaped grooves (12–18 mm width and

19 mm depth) on both ends for proper

22 joint alignment and secure placement.

For jointing of each segment, flange-

bolt connections with 12 mm

diameter, 50 mm length Grade-8.8

high tensile bolts with zinc coating and

round washers, or equivalent nut-bolt

assemblies, will be supplied as part of

the FT Flume drains, as per the

specified design and shape. The drains

shall be manufactured using minimum

C40 grade concrete duly steam cured

for durability, OPC 53 Grade cement

with admixtures as per IS:456-2000,

and coarse and fine aggregates Rmt. 1200.00 8850.00 8938.50

Precast from natural

Element sources. including

Earthwork excavation, PCC, Dry

Bedding, Unloading, Installation and

Jointing with Non-shrink grout

23 material., Errection - Supply 1000 x

1000 mm (into in dimension from top)

(Rate including all cost of materials,

Labour, hydra, )

Supplying factory-made RCC (wet cast)

Precast Without hole cover for FT

Flume Drain category for use in

stormwater drains, Canal,Power and

telecommunication cable ducts and

utility ducts, manufactured by FUJI

Silvertech / FIT / Alcock, having size

1200 Width x 1000 Length x

Thickness, with anti-skid finish on the

top surface and be capable of

withstanding a 1.8 Tonne wheel load

for pedestrian movement. Lids may be

provided with in-built, specially

24 designed lifting inserts of appropriate

load capacity and strategically placed

to prevent tilting during safe and

efficient installation. The lids shall be

manufactured using minimum C40

grade concrete, duly steam cured for

enhanced durability, with OPC

Grade cement and admixtures as per

IS:456-2000, and aggregates derived

from natural sources. Reinforcement

shall be with TMT/TMX bars of Fe

500D or higher, conforming to

IS:1786, fabricated using automated in-

house cage-making units for Rmt. 1200.00 4100.00 4141.00

consistent quality. RO water

PROVIDING & PLANTING TERMINALIAshall be

VENTI TREE FOR MEDIAN OF THE

ROAD 3 METER HEIGHT WITH BAG

25 SIZE MINIMUM 450 X 450 MM ALL

THE LAYER REQUIRED INCLUDING

PROVIDING & PLANTING LARGE TREE

FOR THE BOTH SIDE OF THE ROAD (

I.E. AFRICAN TULIP, YELLOW TULIP

GOLDEN SHOWER TREE, ROYAL

26 POINCIANA, WHITE GULMHOR,

PURPLE ORCHID , YELLOW ORCHID)

WITH ALL THE LAYER REQUIRED

INCLUDING FERTIZERS ETC

PROVIDING & PLANTING COLOR FULL

FLOWERING SHRUBS FOR THE

27 MEDIAN OF ROAD ALL THE LAYER

REQUIRED INCLUDING FERTIZERS ETC

PROVIDING & PLANTING DENSE

SHRUBS FOR THE BOTH SIDE OF THE

28 ROAD ALL THE LAYER REQUIRED

INCLUDING FERTIZERS ETC

SITC of FUJI made precast box culverts

(Chamber 1000 x 1000 x 1000) incl. of

all as directed by the EIC.

SITC of FUJI made precast box culverts

(Chamber 1000 x 1000 x 1200) incl. of

all as directed by the EIC.

SITC of FUJI made precast chamber lid

( for Chamber 1000 x 1000 x 1000)

incl. of all as directed by the EIC.

SITC of FUJI made precast box culvert

CPWD-Type-1) incl. of all as directed

33 Construction of 6" borewell Rft. 300.00 120.00 121.20

Box cutting the road surface to proper

slope and camber for making a base

for road work including removing the

excavated stuff and depositing on the

road side slope as directed upto

50Mt.lead. (SOR P. No. 177, Item Code-

Filling in foundation and plinth with

murrum or selected

soil in layers of 20cm. thickness

including watering,

ramming and consolidating etc.

complete. Cu.M 4050.00 301.58 304.60

Supplying of crushed stone

aggregates, chippings etc. of hard

stone of following nominal size free of

36 disintegrated pieces

deletarious and oraganic mater (for

Bitumen surface dressing

etc.) and grading as per I.R.C. Code.(i)

Spreading the stone aggregate for

rolling and W.B.M.

including filling the interstices to

required camber and Cu.M 2700.00 265.83 268.49

Providing and laying cement concrete

1:2:4 (1-Cement : 2-

coarse sand : 4 - hand broken stone

aggregates 40 mmnominal Sq.M 1350.00 3765.41 3803.06

size) and curing complete excluding

Providing and laying M30 grade

cement concrete road of 7.50 m

width, of required thickness as per

approved drawing, using approved

quality cement, graded aggregates,

sand and water, including batching,

mixing, transportation, laying,

39 vibration and compaction with

suitable vibrators, finishing to required

line, level and camber, providing

necessary construction/contraction

joints with dowel/tie bars wherever

required, and curing for minimum

days, complete in all respects as per

approved drawings and specifications. Cu.M 1800.00 8155.26 8236.81

Providing mix Bar

reinforcement for R.C.C. work

40 including bending, binding and placing

in position complete

upto floor two level Kg. 54000.00 76.52 77.29

Providing and laying 150 micron thick

HDPE (High Density Polyethylene)

sheet of approved quality as a

separation membrane between Dry

Lean Concrete (DLC) and Pavement

Quality Concrete (PQC)/RCC

pavement, including supply of HDPE

sheet, surface preparation, laying with

the minimum 300 mm overlap at

joints (or as specified), proper

41 alignment without wrinkles or folds,

securing the sheet to prevent

displacement during concreting,

trimming to the required dimensions,

and complete in all respects as per the

drawings, MoRTH Specifications

(Section 600), and the directions of

the Engineer-in-Charge.

Providing and forming expansion

joints of size 300 mm depth × 20 mm

width in RCC/PQC pavement by

placing approved 20 mm thick pre-

moulded compressible filler board

over the full depth of the concrete

slab at the locations shown on the

drawings, including fixing the filler

board in proper position before

concreting, ensuring correct

alignment, verticality and continuity of

the joint. The work shall also include

cleaning of the joint, providing a

42 recess where specified, priming and

sealing the top of the joint with

approved hot-poured or cold-applied

elastomeric joint sealant, complete

with all labour, materials, tools, plants,

consumables, loading, unloading,

transportation, leads, lifts and

incidental works, in accordance with

MoRTH Specifications (Section 600),

relevant IRC guidelines and as directed

by the Engineer-in-Charge.

Providing and forming construction

joints of size 50 mm depth × 12 mm

width in (1.5 m x 1.5m grid) RCC/PQC

pavement by mechanically cutting the

concrete surface with a diamond

blade saw at the specified locations

after the concrete has attained the

required strength. The work shall

include cleaning the joint thoroughly

using compressed air or approved

mechanical means to remove dust,

slurry and loose particles, applying

approved primer wherever specified,

43 and sealing the joint with approved

hot-poured or cold-applied

elastomeric/polysulphide joint

sealant, complete with all labour,

materials, tools and plants, machinery,

loading, unloading, transportation,

leads, lifts and all incidental works in

accordance with MoRTH Specifications

(Section 600), relevant IRC guidelines

and as directed by the Engineer-in-

thermoplastic paints: Road marking

with hot applied thermoplastic paints

with reflectorising glass beads on

bitumin surface providing and laying a

hot applied thermoplastic compound

including reflectorising glass beads @

250gms per sqm area, thickness of

2.5mm is excluding of surface applied

glass beds as per IRC:35-2015. The

finished surface to be level, uniform

and free from streaks and holes. zebra

patta /bump patta lane/center line/

44 edge line/cut patta. The white color

marking should provide liminance

coefficinet on cemend road shalll be

min 130 mcd/m2/lux and Asphalt road

shall be min 100 mcd/m2/lux during

the service life during the day time.

The marking should meet the

performance criteria for night time

reflectivity, wet reflectivity and skid

resistance as mentioned in the section-

15 of IRC 35-2015. Warranty for the

Retro reflectivity should be two years.

Cat Eye / Road Stud / RPM: Supplying

of Molded Twin Shanks Raised

Pavement Markers made of

polycarbonate and ABS moulded body

and reflective panels with micro

prismatic lens capable of providing

total internal reflection of the light

entering the lens face and shall

support a load of 13635 kgs. tested in

accordance to ASTM D 4280 Type H

and complying to

Specifications of Category A of MORTH

Circular No RW/NH/33023/10-97 DO

III Dt 11.06. 1997. The height, width

45 and length shall not exceed 20 mm,

130 mm and 130 mm and with

minimum reflective area of 13 Sqcm

on each side and the slope to the base

shall be 35 +/- 5 degree. The strength

of detachment of the integrated

cylindrical shanks, (of diameter

not less than 19 +/- 2 mm and height

not less than 30+/- 2 mm) from the

body is to be a minimum value of

Kgf. Fixing will be by drilling holes on

the road for the shanks to go inside,

without nails and using epoxy resin

based adhesive as per manufacturers MT 330.00 323.00 326.23

Regulatory / Mandatory Sign :-

Providing and fixing sign boards made

out of 2mm aluminium sheet / 4mm

ACP (Aluminum composite Panel); size

60 cms Dia Circle as per design of IRC-

67-2012. Pre treated with phospheting

process & acid etching; coated with

one coat of epoxy primer and two

coats of best quality epoxy paint

;reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type-

11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long

46 stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and

frame fabricated from suitable size

iron angle of 35 x 35 x 3mm; painted

with bestquality epoxy coatings in

black and white bends. The details of

symbol foreach board shall be as per

theinstruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing

etc.complete under the supervision of

engineer in charge. A warranty for

years for the Retro reflective sheeting Sq.M 15.00 4573.00 4618.73

from original manufacturer & a

Facility Informatory Sign :-Providing

and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 80 x

60 cms rectangular as per design

of IRC-67-2012. Pre treated with

phospheting process & acid etching;

coated with one coat of epoxy primer

and two coats of best quality epoxy

paint ;reflectorised with Micro

Grade retro refiectivesheeting of Type-

11 as per ASTM D-4956 and latest

47 M.O.S.T.Specifications; 3.6mtr long

stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and

fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black

and white bends. The details of

symbol foreach board shall be as per

theinstruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing

etc.complete under the supervision of Each 30.00 5848.00 5906.48

engineer in charge. A warranty for

Standard Delineator: Providing and

fixing of Standard Metal Delineator

consisting of minimum retro reflective

unit exposed area of 330 cm2 white

color, full cube corner micro prismatic

non-metallic retro reflective sheeting

on each side conforming with IRC

2012 and meeting the coefficient of

retro reflection values as per ASTM D

4956 Type XI table specification. The

delineator shall be painted with

powder coat of minimum 40 microns

thickness, on top of which retro

48 reflective sheeting shall be pasted on

both sides. The structure shall be

manufactured in roll forming process

and shall have height not less than

mm above the ground, width not less

than 100 mm and shall extend not

more than 300mm below the ground

while being installed. height of

sheeting should be minimum 150mm

whereas width of sheeting should not

be less than 75mm (should be placed

every alternative 15cm). The front and

back faces of the delineator should be

curved with a radius of not more than each 30.00 1017.00 1027.17

200 mm and with delta angle (or

Flexible Median Marker : Providing

and Fixing of Flexible Median Marker

that are made of tough, high impact

resistant, injection-molded,

thermoplastic body with property of

flexibility to provide high durability.

The dimension of Flexible Median

Marker should not exceed 18.4 cm in

height(including shank height),12.5

Cm in width. ,0.65 cm in thickness and

shank depth shall be 3.4 cm The body

structure shall be rounded at all its

corners and edges. The plastic used

49 for molding the Flexible Median

Marker should survive impact load of

5kg continuously for 750 times at

room temperature. The logo of the

manufacturer shall be embossed on

either side of the body in the injection

molding process. The Median Marker

shall have flame like shaped body

with, fluorescent yellow color retro-

reflective sheeting of size not less than

90 Cm square, with fully reflective

micro prismatic cube corners as its

retro-reflective elements as per IRC

2012 and ASTM D4956-09 type XI each 120.00 269.00 271.69

specifications reflectivity

Demolition including values.

stacking of The

serviceable materilas and

50 disposal of unserviceable materials

with all lead and lift. (i)

ELECTRIC, CCTV & ILLUMINATION WORK

Providing and erecting Sheet Steel

powder coated MCB distribution

board - flush / surface mounted fitted

with busbar, neutral link, earth bar

and DIN rail, confirming to IS

and BS 5486-1986 without MCB to

house appropriate nos. of MCBs.(The

DBs should be used of same company

of MCB to be used) Double Door ss

(A)-a-iv Single Phase 12 Way

52 (B)-a-i Three Phase 4 Way Nos. 4.00 2316.00 2339.16

Miniature circuit braker single pole 6A

to 25A suitable to operate on 240 V

A.C. system and having braking

53 capacity 10 KA to be erected in Nos.

existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB

double pole switch (C Curve) having

KA braking capacity & confirms to IS :

8828 in existing box having following

capacity (A) 6 to 32 Amp. Cat.III

Providing & erecting 415 V MCB Four

Pole (C Curve) having 10KA braking

capacity & confirms to IS :8828 in

existing box having following capacity

(c)63 Amp. Cat.III

Providing and erecting ISI mark

Medium class RIGID PVC PIPES of

following size complete to be erected

on/in wall or ceiling erected with

necessary PVC fittings & Junction

boxes fixed with adhesive solution &

Clamps with following dia of pipes, in

approved manner as directed. (b)

Providing & erecting PVC Corrugated

Flexible Conduit with required nos. of

59 coupling, PVC bushes, Check-nuts etc. Rmt.

complete of following sizes. (2) 25 mm

Supplying & erecting UPVC Mini

trunking (PVC Casing-n-Capping)

having double-locking arrangement

with grooves, trunking of size not

below 12.5 mm in height as per IS with

62 accessories of PVC/Resin Rmt.

polypropylene not below 1.8 mm thick

duly sNos.led in joint & erected on

wall / ceiling of following size . (1)

Solderless crimping type Copper lugs

conforming to IS suitable for cable of

following size evenly crimped with

high pressure tool & connected to

switchgNos.r terminals with

brass/cadmium plated nut bolts in an

approved manner. (A) 1.5/ 2.5/4/6

Supplying & erecting XLPE(IS:7098)(I)-

88 ISI unarmoured copper cable 1.1 KV

grade to be erected as directed of

following size. (A) 2 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be

laid on wall with necessary clamps or

in existing trench / pipe at road

crossing or floor of following size of

cables. (B) 4 core 4 Sq. mm

Providing & Fixing approved make

Spot Light 12-18 W, IP-65, 3000K of

Phillips/wipro/havells. As approved

and directed by EIC. 150.00 4603.96 4650.00

Providing and erecting Pipe type

earthing having 150 cms.long and

cms. dia. galvanised iron pipe with

72 coupling and buch buried in specially Nos.

prepared earth pit complete with

necessary 8 SWG earth wire.

Providing and Fixing 24-36W-3000K

Havells/Bajaj/KLITE Having lumens :

1350-1550- lumens ,3000K lights type

lights it has a separate replicable

electronic driver, LED working hours of

50000 hours ,operating temperature

of -35 deg to +47deg ,it can be

mounted by both as surface mounted

and inclination ,its body is aluminium

extrusion and toughened glass and

colour as Directed by EIC inc all.(The

rate is Including of driver and

controller and power & Signal cables).

Providing & Fixing Stone type LED

Ghost Bollard Light fittings of

minimum height 450-550 mm &

Width150- 200 mm having CC natural

stone effect with clear/milky diffuser

mounted on 3mm thick GI finished

74 powder coated pipe with base plate Nos.

450x200mm with erection by

M8x75mm fastner with required RCC

foundation.IP65 for 12 to 20 watt and

above ,surge-4kv of coustomize. as

directed by EIC

Supplying and erecting LED street light

/ Flood light fittings with High power

White LEDs wattage of 3 Watt and

above assembled on single MCPCB,

efficiency more than 130 lm/w and

corrosion free High pressure die cast

aluminum housing with smooth finish

powder coated and heat sink extruded

aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company

mark/name engraved or embossed

160 to 270 V,Power Factor more than

75 0.95, THD < 10 %, CCT 3000 K to Nos.

5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80

certificates)(NOTE: Below description

have shown ranges of Wattage

capacity of LED fittings.The Engineer

incharge may select any wattage

capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge

protection -4kV integral and ,Light

must have 440VAC line supply with

over-voltage protection. (i) above 20 50.00 4051.00 4091.51

Flood Light (IP-65), Surge

protection -4KV integral and ,Light

must have 440VAC line supply with

over-voltage protection. (iv) above

Supplying and erecting approved make

Decorative heritage type pole with

post top lentent.(pole must contain

unique identification of the

AYURVEDA The pole should be made

as per IS. and shall be coated with hot

dip galvanizing as per IS

2629/2633/4759, suitable suspend

local wind speed with integral Junction

box consist of terminal plate of min

6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and

arrangement for cable termination to

be erected With Suitable foundation

(Included) as per details given by

manufacturer considering site

requirement. Height 6 Mtr. Long

mm Top X 135 mm bottom dia, 3 mm

200mmX200mmX12mm base plate, 4-

M20 Bolts and 600mm long with

necessary G.I. J Bolt as directed and

approved by EIC.

Supplying and erecting approved make

Decorative heritage type pole with

post top lentent.(pole must contain

unique identification of AYURVEDA

the The pole should be made as per

IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759,

suitable suspend local wind speed

with integral Junction box consist of

terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm

78 Din-Rail for MCB Mounting, stud type Nos.

terminal and arrangement for cable

termination to be erected With

Suitable foundation (Included) as per

details given by manufacturer

considering site requirement. Height

Mtr. with necessary G.I. J Bolts and

foundations. as directed and approved

SITC of IP 65 External lighting Panel-1

Incoming : 100 amps FP MCCB (25 KA)

with following accessories: 1 Sets LED

type Phase indicating & ON, OFF light

shall be protected by 2 amps SP

MCB's. 3 Nos. of Digital type 0-125 /

amps CTR digital ammeter with 3 nos

125 / 5 amps, 15 VA Class I CT’s.

Digital type 0-500 Volt digital

voltmeter with inbuilt selector switch

& shall be protected by 2 amp TP

MCB’s Bus Bars 100 amps FP Tinned

copper bus bars with coloured heat

79 shrinkable insulated sleeve. Outgoing Nos.

(1) 40 to 63 amps 4 pole MCB ( 10 KA

) : 5 No. (2)6 to 32 amps 4 pole MCB (

10 KA ) : 5 No. (3) 40 amps FP

Contactor : 5 no.(4) 32 amps DP

Contactor : 5 No.(5)6 to 32 amp

DPMCB ( 10 KA ) : 8 no.(6) 6-32 amps

SP MCB ( 10 KA ) : 5 Nos.

(7)Astronomical Timer of L&T make :

8nos. a contractor must submit and

approve design before installing.

S.I.T.C. of single phase submersible

pump set suitable for 100 mm size or

more dia bore well having motor

capacity and discharge as under with

necessary panel box. Lifting and

80 Lowering taken extra. (b) Motor rating Nos

1.5 HP (16 stage) pump having

capacity of 50 LPM at 60 mtr head

suitable for 32 mm dia. delivery pipe

Providing & Fixing BTZ 10000 500 +

500 W, Rms: out at 10% thd/750w

Rms max fir each zone, power

amplifier, Input channels: Mono 2 x

200mv / 100kohm, stereo: L/R 100M /

100kohm, Line L/R 1V / 50 ohm tone

control: BASS: +/- 10DB @ 100Hz,

Treble: +/- 10db @ 10khz, speaker

out: 4 ohm, 8ohm, 70V & 100V for

each zone of AHUJA Make. Model No.

Providing & Fixing 9 channel Sound

Mixer of amx 912 AHUJA MAKE: mic

in, 2kohm / 62db impedance/gain,

Line out: 20kohm balanced / 42db

ohm unbalanced / 42db, Distorstion:

<0.08%, Frequency Response: 30Hz -

20khz (+0 - 1db) line out: Lo/-

10db/+2dbm (200mv / 1V) Hi: 0dbm /

+17dbm (775mv / 5.5V), Echo Reverb

Sys.: Digital signal processing,

Providing & Fixing Computer System

Having intel Core i5 Processor with

83 8GB of Ram and 2Gb Nvidia Grephics Nos.

card of Make Dell/HP/Lenovo

Providing &Fixing 19.5" Monitor of

Make Samaung/Dell/LG. 1.00 9321.78 9415.00

Providing &Fixing 0.750 kva Ups for

85 computer system of Make I- Nos.

ball/sukam/microtek. 1.00 3188.12 3220.00

Providing and Fixing CP PLUS Make

5MP IP Vandel Dome/Bullet Camera

Model No CP-VNC-V51L3

1/2.7" 2MP PS CMOS Image Sensor

Max: 25/30fps@1080P , Max:

Ultra H.265, H.265, H.264,MJPEG

stream encoding

DWDR,Day/Night(ICR),2D/3D-

DNR,ROI,AWB,AGC

2.8mm Lens (3.6mm Optional)

IR Range of 30 Mtrs, IP67, IK10, PoE

Supports Instastream technology,

save diskspace and bandwidth

CMS Software: IVMS

Providing and Fixing CP PLUS Make

Channel H.265 Network Video

Recorder 4K Model No CP-UNR-

4K4162-V2 , Up to 16 channel IP

Up to 8Mp resolution preview and

Max 200Mbps incoming bandwidth

Support 2 SATA HDDs up to 4TB Each,

87 2 USB Ports, Nos

1 HDMI / 1 VGA simultaneous video

Support Multi-brand network

Support RAID 0/1/5/6/10

ONVIF Version 2.4 conformance

CMS Software: KVMS Pro

Providing and Fixing TOSHIBA MAKE

88 SURVELLANCE HARD DISK of 4TB With Nos

Providing and Fixing CP PLUS Make

Network Poe Switch Model No CP-

TNW-GP8G1F1-12 Provide 8 x

10/100/1000Base-T Ethernet

ports(PoE) , 1 x 10/100/1000BASE-T

Ethernet ports and 1 x gigabit SFP

Compliance with standards: IEEE802.3

PoE Power Supply: With 8x gigabit

PoE RJ45 ports, each port supports

max. 30W PoE output, whole machine

reaches 120W PoE power output

With 8x gigabit PoE RJ45 ports, each

port supports max. 30W PoE output,

whole machine reaches 120W PoE

Plug&play, convenient to use, support

desktop, wall-mounted installations

Support 6KV surge immunity, EFT

testing standard

Providing and Fixing D-Link/Honeywell

out door type cat6 cable with HDPE

90 Jacket having proper insstallement in Rmt.

Condiut as directed by EIC

Providing & Fixing D Link wall rack 6U

Providing and Fixing Sisco,D-link,TP-

link Make 16 Port rack mounted

network switch,2copper giga,2SFP

giga,12 10/100 mbps ports,19"rack

mounted operation power 230V Ac

Providing and Fixing Sintex Junction

box of size 250X200X100 including

carefully fixing the box at verious

places and connection with proper

manner as directed by EIC.

Providing and Fixing Sintex Junction

box of size 140X140X95 including

carefully fixing the box at verious

places and connection with proper

manner as directed by EIC.

Providing & Fixing Landscape Speaker

Input Power 16w Rms: 45w max,

Power Tap:16/8 on 100V, Low IMP:8

Ohm, Frquency Resp: 80-20000Hz, Spl

95 (1w/1m): 87db, Dim: w178 x h252 x Nos.

d144 (mm) Wt. 2.40 Kg of AHUJA

make model No. LSX 930T or simmilar

as approved by EIC.

Providing & laying approved make

Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS

14930 II )with necessary connecting

accessories of same material at

96 required depth in existing trench for Rmt

laying of cable. below ground / road

surface for enclosing cable (B)63mm

Supplying following size of Light duty

“A” Class G.I . Pipe & erecting as

directed by Engineer-in-charge. (B)

Providing and Fixing LED Profile Light

IP-65 with 24W/ Mtr wattage capacity

with sytable driver and Mounted on

surface with peoper tools with

aluminium profile as of approved

make.directed by EIC. 600.00 1319.80 1333.00

Providing & Laying 12Core SM (single

mode) Fibre Optic Cable in existing

pipe/Conduit with of Birla ericssion

make incl. of all. 1200.00 114.11 115.25

Providing & Fixing Optical

Transreceiver LAN signal to Optical

converter incl. of all of make Florida

Optical 12 Core Fiber Termination

(splicing) @ 1 end with Liu pigtel

ST/LC/FC Connector of Florida / D Link

make incl. all 6.00 552.06 557.58

Supplying & erecting in earthpit of

minimum bore dia. 225mm size

approved make Safe Earthing

Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made

of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 80 mm

having 80-200 Micron galvanising,

Inner pipe dia of 40 mm having 200-

250 Micron galvanising, connection

terminal dia of 14 mm with constant

ohmic value surrounded by highly

conductive compound with high

102 charge dissipation suitable for Nos

following type of applications with

chamber and heavy duty

cover.(approved make OEM has to

submit test certificate including value

of earth resistane of installation. [C]

For Electrical Installation covering

Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation,

SCADA)i.e. independent Earthing

located in other than normal soil i.e.

Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs. 6.00 10489.00 10593.89

-Back filling Compound :2 nos Bags of

SITC of single phase submersible pump

set suitable for 100mm size dia bore

well having motor capacity and

discharge as under with necessary

panel box. Lifting and lowering extra

(b) motor rating 1.5 HP (16 stage)

pump having capacity of 50 LPM at

meter head suitable for 32 mm dia.

delivery pipe cat II.

* Grand Total without GST

* Grand Total without GST

* Add 1% For Material Testing