Providing fire fighting system in SDO civil complex at Naraingarh in Ambala Distt.

Amount

SITC of mild steel pipe ( IS :1239 Part-1 ) C class heavy class including cutting ,threading , welding etc bends , elbows ,reducers ,clamps , hangers etc . including cutting holes in brick or RCC walls / slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. galvanized M .S rods , angles channels , slotted angle , etc , cutting to sizes , drilling welding fixing to insert plates , including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work NOTE : Pipes up to 50 mm dia shall be threaded joints ,above 50 mm shall be welded joints .100MM dia

80MM dia

SITC Of C .I Butterfly Valve , Wafer end Type Class P N 1.6 As Per I.S : 13095 Or BS : 5155 , Including Necessary Nuts , Bolts , Gaskets Etc , Complete 100 mm dia

80 mm dia

SITC OF CAST IRON NRV NON RETURN VALVE DUAL PLATE WITH NUT BOLT AND FLINGES COMPLETE IN ALL SENSE 100 mm dia

SITC of Single headed, S.S ISI marked oblique pattern hydrant landing valve/ Yard or internal Hydrant valve with 80 mm dia. flanged inlet and 63 mm dia. instantaneous type female outlet complete with cap. and G.I. chain, twist release type lug and all accessories as per is:5290-1983DSR 9.2)

SITC Of Internal Fire Hose Box , Wall Mounting Or Free Standing Type , Made Out Of Fibre Glass Reinforced Plastic Of Approved Colour Of Weather proof hose cabinet of size 750 x 600 x 250mm, to accommoate Two 15 m Length Of Delivery Hoses And A Branch Pipes With Glass Fronted Double Door With Lock And Keys And Break Glass Recess For Keys ,Complete In All Manners .MAKE: G.TECH / FIRE CUT / MINIMAX / NEW AGE/ SUPEREX / KARTAR )/omax/ life guard/cnp/ padmini etc.(NS)

SITC of Non-percolating hosepipe (RRL type - 1) ISI marked (is:636) 63 mm dia. x 15 m long complete with instantaneous type , /S.S 63 mm dia. ISI marked male and female couplings (IS:903-1985) bound and riveted to hose pipe with copper rivets and 1.5 mm dia. copper wire. (DSR 16.2)

S.S 63 mm dia. short branch pipes with 16 mm dia.Nominal Bore Outlet With Standard Instantaneous Type 63 mm Dia Coupling In All Respects . ISI Marked (IS:903(DSR 18.2)

SITC of First-aid fire hose reel IN RED COLOUR DRUM ,wall mounting swinging type complete with drum, bracket, 25 mm dia. stop valve and 20 mm dia. x 30 m long high pressure hose reel tubing as per is:1532 with gun-metal/S.S shut-off nozzle having 5 mm dia. OUTLET. the hose reel shall strictly confirm to is: 884 : 1969. (DSR 17.1)

SITC OF C gunmetal 2 way fire bridge connection with 150 mm butterfly valve 150mm non retrun valve & i/c 18 SWG panited M S Box 30x20x10 with MS framed front with glass panel and words” FIRE BRIDGE INLT ” painted in bold letter written on it in red colour as required. (DSR 19.1)

SITC OF Air vessel 150MM dia x150mm height with dish top made in 6mm thick ms pipe complete with 20mm dia brass air valve , 200mm dia stop valve , pressure gauge ,stop cock, nipple (DSR 20)

SITC Of Brass / Bronze Lever Operated Ball Valve Of Full Flow With Stainless Steel Ball ( AISI 304 And Spindle AISI 410 ) With Setting And Gland Of Superior Quality Having Minimum Working Pressure Of 20 Kg /Cm (DSR 22.103.3) 25 mm dia

SITC of Pressure switch of approved make for Hydrant pump, jockey pump and Diesel Engine Driven pump including necessary wiring and cut off valve up to central panel & other material as described in specifications. (DSR 22)

SITC of burden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe. (For each PUMP ROOM ) MAKE H GURU,FIEBIG , /omax/ life guard/cnp/ padmini etc.(NS)

SITC OF Co2 type fire extinguisher ISI mark IS code 15683 – 2006 )capacity: 4.5 kg with I mtr long hosepipe MAKE (FIRE CUT ,CEASE FIRE ,MINI MAX ,SAFEX , KANAX , ) /omax/ life guard/cnp/ padmini etc.(NS)

SITC OF ABC type fire extinguisher ISI mark IS code 15683 – 2006 capacity: 09 kgs 90 % MAP(Mono Amonium phosphate) pressurized with dry nitrogen MAKE (FIRE CUT ,CEASE FIRE ,MINI MAX ,SAFEX , KANAX , ) /omax/ life guard/cnp/ padmini etc.(NS)

SITC of fire bucket stand having four 9 ltr. Sand filled 8 buckets 4 stand 2 set (HSR EL 257)

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. 100mm dia (DSR 23.1)

Supplying, installation, testing and commissioning of Terrace Pump 900LPM suitable for automatic operation and consisting of following, complete in all respects, as required (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads(DSR 4.1)

Providing and placing on Terrace Water Tank 10KL polyethylene water litre 8 storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but withoutfittings and the base support for tank.Construction of PVC TANK(DSR 22.181)

DOMESTIC TANK FOR TERRACE 5KL(NS) (Qty 5 KL)

Smoke Detector Conventional Type electric Shaft (LIFE GUARD) (NS)

Smoke Main Pannel Ten ZONE LIFE GUARD. (NS)

Smoke Detector Sub Pannel (LIFE GUARD) (NS)

MCP/TBS (LIFE GUARD) (NS)

HOOTER Allied with PA set (LIFE GUARD) (NS)

Exit Signage Electrical (LIFE GUARD) (NS)

PA System with Allied Hooter (Public Adress System) (NS)

Electric Shaft Fire Door 2200*750= 1.65 sqmtr. Each door (NS)

SITC of following sizes of 1100 V grade PVC Aluminium armoured cables, PVC insulated PVC sheathed, /supports as per site conditions. 16 x 10 Sq.mm. 4 cour aluminium (HSR 24.2.2.2)

Control Cable 2 C x 1.5 sq.mm. copper unaround (HSR 24.2.9.1)

MS Conduet Pipe 25MM (HSR 23.6.6.2)

EARTHING AND LIGHTENING ARRESTOR HSR 24.0 24.1.1 Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.. (HSR 24.1.1)

24.1.2 Extra for using salt and char coal/coke for pipe earth electrode as required.

24.1.3 Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

24.1.4 Earthing with tinned copper earth plate 6D0mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.

24.1.5 Extra for charcoal or coke and salt for G. I. plate or copper plate earth electrode.

24.1.6 Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required.

24.1.7 Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.

24.1.8 Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.

24.1.9 Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required.

24.1.10 Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material

24.1.11 Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required.

24.1.12 Supplying and laying 6 S.W.G G.I. wire at 0.50 m below ground level from earth electrode including thimbles, soldering etc. as required.

24.1.15 Erection only of lightning conductor GI. tape including supply of suitable GI. staples of same size.

24.1.16 Supply and erection of 25mm dia 1.5 metre long lightning GI. tube rodtapered into a point at the top with 16cm x 16cm x 3mm thick G.I. base plate and necessary nuts and bolts with washers.

24.1.17 Providing and fixing testing joints made of 20mm x 3mm thick G.I. strips 125 mm long with 4 nos. G.I. bolts and nuts with washers complete.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil (HSR 4.14)

Cement concrete 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) (HSR 6.1.6)

Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) (HSR.7.21.1)

Providing and laying damp-proof course with cement concrete 1 :2:4 (1 cement : 2 coarse sand (zone-Ill): 4 graded stone aggregate 12.5mm nominal size) (HSR 6.8.2)

Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : Cement mortar 1:4 (1 cement: 4 coarse sand) (HSR.7.22.1)

Half brick masonry with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level (HSR 7.28.2)

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) sqm including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc (HSR. 6.29.2)

Cement concrete 1 : 1 ½: 3 ( 1 Cement: 1 ½ coarse sand (zone-Ill) : 3 graded stone aggregate 20 mm nominal size). (HSR 6.1.1 )

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor four level, excluding the cost of centering, shuttering and finishing: (HSR 6.2.1) 1 : 1 ½: 3 ( 1 cement : 1 ½ coarse sand (zone-Ill) : 3 graded stone aggregate 20 mm nominal size).

Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1 :3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1 :3 (1 cement : 3 fine sand) and finished neat: (HSR 9.14.1) With common burnt clay non-modular brick tiles of class designation 10

Pointing on tile brick work with cement mortar 1 :3 (1 cement : 3 fine sand): HSR 11.26.1) Flush/ Ruled/ Struck or weathered pointing

Providing gola 75x75 mm in cement concrete 1: 2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1 :3 (1 cement : 3 fine sand) as per standard design : (HSR 9.17.1) In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1 :3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.(HSR 9.18)

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (HSR 9.57.2) 110 mm

Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (HSR 9.58.5.2)

Providing and laying of Conglomerate floor 25 mm thick cement concrete 1:2:4 on 100 mm cement concrete 1:8:16 and 100 mm sand or stone filling. (HSR 10.9)

12 mm thick cement plaster 1:4 as per (HSR 11.5.3)

15mm thick cement plaster 1:4 on rough side of Single or half brick walls (HSR 11.6.1)

10 mm thick cement plaster 1:3 (HSR 11.4.2)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates (HSR 13.29.2)

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Fixing with adjustable lugs with split end (HSR 13.3.2.1)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick (HSR 12.9.1)

Making suitable hole in the wall suitable for exhaust fan up to 450 mm sweep including finishing the same and fixing of Stainless steel wire mesh 2 mm thick having about 50 meshes per inch at exhaust side complete as required. (HSR 23.11)

Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work.(HSR 23.9)

Planking of commercial hard wood, such as Hollock, champ, chikrassy and chaplash etc., (Non-coniferous timber other than teak conforming to I.S. specification no.1003 kiln-seasoned) planed on both sides, rebated and fixed in position, including nails and screws, etc: (HSR 12.24.3)

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete (HSR 11.76)

Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. (HSR 11.77)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.(HSR 11.78)

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (HSR 11.60)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: (HSR 11.64.1)

Finishing walls with Acrylic Smooth exterior paint of required shade (HSR 11.95.1)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.: (HSR 9.33)

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete. (HSR 6.33.6) Thermo- echanically Treated bars of grade Fe-500 D or more.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with (HSR 13.10.2) 5.5 mm glass