SPECIAL REPAIRS TO BUILDING NO P-114 VENDURUTHY SAILOR BARRACK AT NAVAL BASE KOCHI

Amount

Dismantling single layer MP roofing tiles including ridges all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails all as specified and as directed.

Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and as directed.

M & L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling including anodised Aluminium snap grid of size 605x605 mm and GI hangers 6mm dia upto 1200 mm length all as specified and as directed.

M&L for preparation of new surfaces (Ceiling) applying two coat of oil bound distemper over one coat of primer complete all as specified and as directed.

M & L for two coats of creosoting to old tiles battens of any size and spacing prepared and treated all over (measured overall on one side only, spaces not deducted) all as specified and as directed.

M & L for second class hard wood weather boarding, clean sawn, plain, or feather edged 20mm thick all as specified and as directed.

Complete removal of existing surface finishes of external wall, preparation of surface and applying two coats of weather proof paint, Apex Ultima Protek system of Asian paint or equivalent of Berger/Nerolac/Dulux over a coat of suitable primer over 3mm thick wall care putty of three layer, duly applied through company authorised applicator or under company supervision using modern tools and techniques complete all as specified and as directed by the Engineer-In-Charge. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction & contractor shall submit performance Guarantee for period of five years complete all as specified.

M&L for preparation and complete removal of existing treatment and applying two coats of Interior Emulsion over a coat of primer and 3mm thick wall care putty complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

Demolition of brick work / PCC block masonry built in cement mortar including all quoins, arches, pillars, etc. all as specified and as directed .

M&L for Pre-cast cement concrete block masonry with solid blocks in PCC 1:3:6, exc. 10 cm in width and setting in mortar in CM 1:6, complete all as specified and as directed .

Demolition of reinforcement cement concrete for roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including removal of all demolished material form site complete all as specified and directed

Use and waste of formwork to sides and soffits of beams, lintels, cantilevers etc complete all as specified and directed .

M & L for RCC type B1 1:2:4 (20 mm graded stone aggregate)as in beams, cantilevers, lintel etc complete all as specified and directed .

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed

Taking down cement plaster of any description on brick or stone walls, ceiling including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for Rendering 10mm thick in CM 1:6 internally on brick or concrete surfaces of wall including finishing even and smooth without using extra cement etc complete all as specified and as directed.

M&L for preparation new plastered internal surfaces and applying two coats of Interior Emulsion over a coat of primer and 3mm thick wall care putty complete all as specified and directed. Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction.

M&L for 15mm thick plaster in CM 1: 4 finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for preparation new plastered external surfaces for preparation of surface and applying two coats of weather proof ( Apex Ultima Protek system of Asian paint or equivalent of Berger/Nerolac/Dulux ) paint over a coat of suitable primer over 3mm thick wall care putty of three layer, duly applied through company authorised applicator or under company supervision using modern tools and techniques complete all as specified and as directed . Note:- Application of paint, primer and wall care putty shall be as per manufacturer's instruction & contractor shall submit performance Guarantee for period of five years

M&L for Preparation of old decorated surface of walls including cornices (Plastered or unplastered) and applying one coat of white wash all as specified and as directed.

Taking down chowkats with shutter n.exc 1.5 Sqm each (without taking off shutters from the frame) all as specified and as directed.

Taking down chowkats with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frame) all as specified and as directed.

M & L Plain solid straight chowkats IInd class hard wood wrought framed rebated on the solid rounded or chamferred put together with glues pinned at joints etc complete all as specified and as directed.

S & F Flush shutter 40mm thick solid core construction with block board core and plywood face panels covered with decorated face veneer on one face with lipping to match complete all as specified and as directed.

S&F second class hard wood, 35 mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. divided into squares with plain chamfered mitered and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, section 8, clause 8.20 (a); supplied & fitted to Chowkats all as specified and as directed.

S&F Powder coated anodised aluminium frame for door/window with or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Powder coated anodised aluminium window and ventilator shutters, fixed type/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD

S & F Powder coated anodised aluminium 5mm dia hexagonal channel for grill fixed to aluminium frame with aluminium bidding complete all as specified.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty / beading in squares exceeding 0.5 sqm each pane fix to wood/aluminium joinery complete all as specified and directed

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane fix to wood/aluminium joinery complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Solid PVC Door Frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, complete all as specified and directed.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plain colour PVC sheet on back face, complete all as specified and directed.

S&F MS door springs (Capsule type) 150 mm long and including roller and roller plate complete all as specified and as directed.

S&F extruded aluminium alloy handles, 150 mm long fabricated type anodised all as specified and as directed.

S&F aluminium, anodised, barrel tower bolts of extruded section of size 150 mm long all as specified

S&F aluminium anodised sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts etc complete all as specified and as directed.

S&F 125mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 , etc complete all as specified and as directed.

Applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces etc complete all as specified and as directed.

Cutting holes in brick wall built in CM for inserting hold fast etc and making good dismantled portion in CM 1:3 or PCC 1:2:4 type B1 with depth of embedded purlin exc half brick but n.exc one brick, etc complete all as specified and as directed.

S & F mild steel framed works, framed and hung as in gates including pintle hinges, holdfasts, stops, hand made sliding bolts fixed in walls/pillars etc complete all as specified and as directed.

Treating to back of chowkats area tarred exc 0.1 Sqm but n.exc 0.5 Sqm each,etc complete all as specified and as directed.

M & L for 18/19mm thick Veneered particle board, solid core, interior grade, with decorative face veneers both faces for making of cupboard shutter complete all as specified and as directed

S&F 125 mm long, Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

Dismantling wall/floor tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises as in repair, complete all as specified and as directed

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ,complete all as specified and as directed

M&L for 75 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate complete all as specified and as directed.

M&L cement concrete type B-1, 1:2:4 (20mm graded aggregate) 25 mm thick as in flooring ,complete all as specified and as directed.

M&L for anti-skid rectified ceramic tile of size 400x400x8 mm thick over cement screed 10 mm thick in CM 1:4 with WPC as per manufacturer's instruction over 25 mm thick PCC type B0 1:2:4 levelling course on RCC slab complete all as specified (Note-WPC shall be measured and paid separately)

M&L for Glazed ceramic tiles in vertical surface 600x300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering CM 1:3 complete .

M&L for 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-calls, cooking platforms and like over 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S & F Machine cut polished,kota stone slab flooring 20-25mm thick with white marble border over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing match laid over and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed .

M&L for cutting grinding of terrazzo tiles or kota stone floor etc with grinding machine after filling the pits and holes with matching cement and polishing with 3 step grinding stone complete on floor/ vertical surface of wall dado, skirting etc complete all as specified and directed by Engr-in-Charge

M & L for chequered colour cement concrete tiles 30x30cmx 25mm thick set jointed and pointed in neat cement slurry in floors/steps including screed bed or bedding layer of mortar 15mm thick in cm 1:4 ,complete all as specified and as directed

Demolition and breaking up AC drain pipes fixed to walls ,complete all as specified and as directed

S&F PVC (SWR) pipes in 75mm. dia single socketed, in any length with rubber ring joints, fixed in wall/floor complete all as specified and as directed

S&F PVC (SWR) pipes (110mm) single socketed, in any length with rubber ring joints, fixed to wall/floor complete all as specified and as directed

PVC (SWR) bends with access door any radius 75mm complete all as specified and as directed

S & F for 110mm dia PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed

S & F for 75mm dia PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed

S & F for 110mm PVC (SWR) vent cowl complete all as specified and as directed

PVC (SWR) junction single, (Single 'T') equal or unequal 110mm all as specified and as directed

PVC (SWR) junction single, (Single 'T') equal or unequal 75mm all as specified and as directed

S&F PVC (SWR) couplers 75mm all as specified and as directed

S&F PVC (SWR) couplers 110mm all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for ,all as specified and as directed

M&L Rolled sections (Tubular sections) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and fixed with angle cleats or other connecting plates ,all as specified and as directed

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of anti corrosive epoxy paint over a coat of epoxy primer, all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets all as specified and as directed. Make :- Cat No. C844T of Parry ware, Cat No. P5115 MPW of Johnson, Cat No.CNS-WHT-809 of Jaguar

Supply only 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make :- Cat No. T0802A1 of Parry ware, Cat No.T2601C4 of Johnson,Cat No. ARI- 39011 of Jaguar

S&F in repairs SS towel rail 60 cm long fixed complete all as specified. Make :- Cat No. CAN-CHR-1115M of Jaguar,Cat No. T6401A1 of Parry ware

S&F in repairs PTMT urinal spreader of any colour suitable for 15 mm bore fixed with urinal including CP pipe complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white incl plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float & handle incl brackets, PVC connections 15mm size with PTMT nuts of length 600 mm and Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed. Make :- Cat No. C-844A White of Parry ware, Cat No.3131 White of Cera, Cat No.92082 White of Hindware.

S&F vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and as directed.

S&F in repairs 10ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm , all as specified and as directed.

S&F hand shower (health faucet) with 8 mm dia 1 Mtr long flexible tube and wall hook (Make Prayag Cat Pat No: BEA-81),all as specified and as directed.

S&F in repairs brass chromium plated bottle trap 32 mm bore with inlet or outlet screwed for pipe for connection including necessary packing, union and cap all as specified and as directed.

S/F for hume pipe septic tank 25 users capacity including necessary earth work in soft / loose soil, PCC 1:3:6 in bed concrete with accessories like AC vent pipe, cowl, manhole cover etc including connecting to the nearest sewer line complete all as shown in Drg No. TD/2/86 sht 1/1 including removal of old septic tank and connected works all as specified and as directed.

Dismantling fencing wire mesh, any type complete , all as specified and as directed.

Dismantling posts or struts (wood, steel of RCC) any section, including taking out embedded portion and making good disturbed ground, concrete , brick work, masonry, etc all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, in soft/ loose soil complete all as specified and directed.

S&F MS post and struts in fencing including cutting tops to sharp as directed, drilling holes, notching for wire etc and confirming to similar work Fe-290 grade E-165, complete all as specified and directed.

M&L for Plain cement concrete 1:2:4, type B2 (using 40mm graded aggregate) as in foundation, filling & mass concrete complete , all as specified and directed.

Supply only Chain link MS galvanised fencing, including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete , all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete , all as specified and directed.

S & F for MS Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, fencing post and similar work etc. king rods and straining bolts conforming to Fe 290 Gde E-165 complete all as specified

S&F Framed work (Fe-410-W (Gde-E-250) quality-A) as in doors, grill or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer, over a coat of red oxide on steel surfaces complete all as specified and as directed.

M & L for Preparation of new steel surface of any description or n.exc 10cm in width or girth and applying two coat of anti corrosive Epoxy paint over a coat of Epoxy primer on steel surfaces complete all as specified and as directed.

S&F prepainted galvaume Zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLS multistranded single core copper conductor cable in PVC concealed medium grade conduit rigid non metallic on wall except beam, column and RCC roof and chases cutting incl 1.6 mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylem top cover incl 1.5 Sqmm PVC insulated copper conductor earth continuity wire for one light/fan point controlled by one switch, complete all as specified and as directed.

All as per item No 95 above but for one 5 pin 5 amps socket outlet on the same board

All as per item No 95 above but for one 5 pin 5 amps socket outlet an independent board.

All as per item No 95 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board.

S&F switch piano flush type 5A one way complete all as specified and directed.

S&F S/S combination 5 pin 5 Amps flush type complete all as specified and directed.

S&F S/S combination 6 pin 15 Amps flush type multi purpose complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals complete all as specified and directed.

S & F in repair fan regulator electronic step type 100 W, 250 Volts complete all as specified and as directed.

Supply and fixing of heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep all as specified and directed . Model -turbojet SP of Havells/Usha/VGuard

S&F Tube light fitting 1 x20 w ,with T 8 LED tube with aluminium extrusion heat sink for optimum performance with high luminous efficiency and batten pre wired suitable for use with LED tube with concealed accessories complete. including taking down old one complete all as specified and directed. Make: Philips Cat part No;TMC501 P 20W 1XT LED P3241+ESSENTIAL LED TUBE 20W 1200MM 20W 865 T8 IND/HAVELLS/WIPRO

Supply and fix LED street light 35/36 W IP 65 protection including all accessories and suitable GI pipe for fixing on wall including all connection all as specified and directed by Engineer in charge. Make:-Cat Part No:LSTS-36-CDL-M of Crompton/Philips/Luker

S & F wall mount type LED Bed lamp 1x3 W,230V complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable including 1x3 watt LDC white 30 K lamp of suitable type all as specified and directed . Make :- Philips Cat part no 48042/30/31 or equivalent havells ,Compton .

S&F Sheet metal enclosure SPN DB when MCB's to be used 4 way with 200 amps bus bar double door, including taking down old DBs from existing position including MCB all as specified and as directed

S&F Sheet metal enclosure SPN DB when MCB's to be used 8 way with 200 amps bus bar double door, including taking down old DBs from existing position including MCB all as specified and as directed

S&F Sheet metal enclosure SPN DB when MCB's to be used 12 way with 200 amps bus bar double door, including taking down old DBs from existing position including MCB all as specified and as directed

S&F Sheet metal enclosure TPN DB when MCB's to be used 4 way with 200 amps bus bar ,415 Volt ,50 Hz double door, including taking down old DBs from existing position including MCB all as specified and as directed

S&F MCCB TPN 63 amp ,415 volts ,10 KA all as specified and directed

S&F MCB SPN 6 to 32 Amp ,240 Volts,10 KA all as specified and directed . Make :-Cat part No -408617 of Leegrand/Indo Asian/L&T.

S&F MCB SP 6 to 32 Amp ,240 Volts,10 KA all as specified and directed Cat part No -408595 of Legrand / L&T/Indo Asian

M&L for sub main wiring with 2 runs of 4 Sqmm PVC insulated copper conductor, multistranded cable drawn in concealed PVC conduit medium grade of suitable size and one run of 4 Sqmm multistranded copper conductor cable for earth continuity wire, including taking down old sub main wiring all as specified and as directed. Note:-Three runs of 4 Sqmm size PVC copper conductor and one run of PVC conduit shall be measured as one unit length.

M&L for sub main wiring with 4 runs of 6 Sqmm PVC insulated copper conductor, multistranded cable drawn in concealed PVC conduit medium grade of suitable size and 02 runs of 6 Sqmm multistranded copper conductor cable for earth continuity wire, including taking down old sub main wiring all as specified and as directed. Note:- Six runs of 6 Sqmm size PVC copper conductor and one run of PVC conduit shall be measured as one unit length.

M & L for taking down 1200/1400mm sweep ceiling fan, preparing the surfaces of ceiling fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No, fixing the fan in its original location, connecting up including provision of cable from ceiling rose to connector to fan complete all as specified and as directed.

Taking down unserviceable ceiling fan of 1200mm/1400mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No complete all as specified.

S&F in repair XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, cross-sectional area16 sq.mm 4 core including taking down old unserviceable cable complete all as specified and as directed.

Material and labour earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounded from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electrode connected by using GI wire 4 mm dia (max -length of 7.5 mtrs )by means of bolts, nut and washer of GI and providing GI light grade pipe 15 mm dia as protection pipe for GI wire connected main control board / test point and provided with GI pipe of light grade 20 mm bore for watering and including funnel, wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 including testing on completion.

Supply & fix stop valve (angle type) cast copper alloy high pressure, screwed for 15mm dia CP fancy type (Half turn) including taking down old fitting etc complete all as specified and as directed.

Supply & fix of concealed stop cock of size 15mm (half turn) with sliding flange CP fancy type including taking down old fitting etc complete all as specified and as directed.

Supply & fix of bib cock short body chromium plated with flange and aerator CP fancy type of size 15mm including taking down old fitting etc complete all as specified and as directed.

Supply & fixing of swivel shower of PTMT any colour with shower arm 15 mm size,195mm long with bend of 45 degree with flange of PTMT including taking down old fitting etc complete all as specified and as directed.

Supply & fixing of PVC connections 15mm dia size with PTMT nuts of length 450mm and taking down old one complete with brass union on both sides to suit 15mm GI pipe all as specified and as directed.

S&F on wall / ceiling (concealed) CPVC pipe 25 mm dia SDR 11 & plain SDR 11 fittings including taking down old GI pipe all as specified and as directed.

S&F on wall / ceiling (concealed) CPVC pipe 20mm dia SDR 11 & plain SDR 11 fittings including taking down old GI pipe all as specified and as directed.

Classic Builders

SUKU CONSTRUCTIONS

M/s ANTONY THOMAS AND CO

SREENARAYANA ENTERPRISES