Spl repairs to Bldg No P 48 and Replacement of Old CI to DI and certain allied works at Zone 3A area in SAA under GE S Tezpur

Amount

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

Material and labour for (old size bricks)brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar ( 1:6) complete all as specified and as directed.

Material and labour for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar ( 1:6) complete all as specified and as directed.

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame) including dismantling of PCC bed blocks for hold fasts complete all as specified and as directed.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts complete all as specified and as directed

Dismantling Reinforced Cement Concrete of any description and in any Position not otherwise specifically provided for, complete all as specified and as directed.

M&L RCC (Nominal Mix) 1:2:4 type B-1 (Using 20mm graded stone aggreagate) as in slab, shelves supported on walls beam & coloumns in floor roof including balconies, canopies, deck slabs & shelves complete all as specified and directed. NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items.

M&L RCC (Nominal Mix) 1:2:4 type B-1 (Using 20mm graded stone aggreagate) as in Beams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified and as directed. NOTE : Formwork and Reinforcement shall be Measured and Paid for separately under relevant Items.

M&L for use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, rough finished surface of concrete complete all as specified and directed.

M&L for use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.

S&F TMT bars (Fe-500/ Fe-550D) 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L TMT Bars 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

M&L TMT Bars 8 mm dia , cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, as in stirrups spacers and binders complete all as specified and as directed.

Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed.

S&F PVC False ceiling consisting of 600mm x 600mm x 5mm thick plain embossed PVC sheet of density 600Kg/Cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using powder coate Aluminum "T" section of sizes 1"x1" (25 X25mm, 19 gauge or 1mm thick) in square pattern og grid sizes of 2'x2' (600mm x600mm). The aluminum framework is supported from the ceiling with the help of 'J' hook/ Fastner and orWire / 4mm MS rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum "L" section of size 1"x1" (25x25mm) angles etc. complete all as per direction of Engineer-in-Charge.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed.

M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC @ 2% by weight of cement or as per manufacture instruction and finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid for separatel)

M&L 10mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

Supply only water proofing compound. Conforming to IS -2645.complete all as specified and as directed.

M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M&L one coat of white wash on ceiling and cornices including preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot complete all as specified and directed

M&L Preparing new plastered surfaces of Walls and applying Two Coats of Plastic Emulsion Paint over 10 cm width or girth over a coat of primer and applied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. .

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Plastic Emulsion Paint over 10 cm width or girth over a coat of primer and applied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. .

M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and appplying two coats of weather coat(Apex) paint over one coat of damp proof primer to wall/chajja of external surface as per manufacturer instruction and apllied by approved applicator complete all as specified and as directed.

M&L Preparing new plastered surfaces of Walls and appplying two coats of weather coat(Apex) paint over one coat of damp proof primer to wall/chajja of external surface as per manufacturer instruction and apllied by approved applicator complete all as specified and as directed.

Material & Labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding/complete and removing rubbish off the premises complete all as specified and directed.

M&L Cement Concrete type B0 (1:2:4) (12.5mm graded aggregate) 25mm thick, in Flooring, finishing concrete surfaces fair and even, complete all as specified and as directed.

M&L Glazed Ceramic Coloured Tile 450x350x7mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed.

M&L Non-skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed.

M/L Granite (of any type) tiles 18-20 mm thick machine cut (table rubbed and polished), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 over cooking platform including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L 18-20 mm thick Granite (of any type) tiles machine cut (table rubbed and polished), in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick screed bed in CM 1:4 including grinding the edges half round and polishing including etc complete all as specified and directed.

S&F Solid PVC frame of size 50mm x 47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing etc complete all as specified and as directed. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and as directed.

M&L Pressed steel frames for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. Note :- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate.

S&F Flush Shutters 30 mm thick, Solid Core Construction with Block Board Core and Plywood Face Panels, Commercial type on Both Sides, complete all as specified and as directed.

S&F Standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE) frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F Standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE) for window (sliding three track/two track/fixed or lover type) and ventilator shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing or gaskets for fixing glass, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking arrangement , screws, plugs, handle, lock, roller, Nylon ball bearing etc, complete complete all as specified Note Glass and wire mesh shall be measured and paid separately under respective items.

S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed. NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter.

S&F 100 mm thick mild steel butt hinges,medium weight and fixed etc complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws complete all as specified and as directed.

S&F Mild steel 200 mm ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Supply & Fix floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm complete all as specified and directed.

S&F Stainless steel decorative curtain rod of 25 mm bore complete all as specified and directed.

S&F Stainless steel and ABS decorative curtain brakets with finels complete all as specified and directed.

M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed.

M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Varnish (First quality), complete all as specified and as directed.

M&L Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as speci-fied and as directed.

Taking up or down Steel Water Tubing 15mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, or removing to store, complete all as specified and as directed.

Taking up or down Steel Water Tubing 20mm dia (bore) including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use or removing to store, complete all as specified and as directed.

S&F CPVC pipes 16 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

Supplying and fixing 16mm dia CPVC Brass Elbow complete as all specified and as directed.

Supplying and fixing 20mm dia CPVC Brass Elbow complete as all specified and as directed.

Supplying and fixing 16mm dia CPVC Brass Tee complete as all specified and as directed.

Supplying and fixing 20mm dia CPVC Brass Elbow (3/4 X ½) complete as all specified and as directed.

Supplying and fixing 16mm dia CPVC Female Brass Threaded Adaptor (FTA /FBTA) complete as all specified and as directed.

S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with "p" or "s" trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat botton cover (coloured) fixed with mild steel chromium plated or aluminium hinging device and making good disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.

S&F Counter top wash hand basin white flat of size 545X545X180mm excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed.

S&F Sinks made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix stop valve/ angle valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.

Supply and fix,waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc including necessary fixing arrangement complete all as specified and directed.

Supply and fix, 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.

Supply and fix, Hand Shower (Health Faucet) (Brass chromium plated) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed.

S&F PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.

S&F in repairs PVC (SWR) 110mm dia bends any radius and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Branch Pieces 110mm bore (dia), Single (Single Y) equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Junction 110mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl 110mm bore (dia), Jointing to Pipe with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Soil, Waste and Ventilating Pipe 75mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed.

S&F in repairs PVC (SWR) 75mm dia bends any radius and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Branch Pieces 75mm bore (dia), Single (Single Y) equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Junction 75mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases of exsisting wall for wall taking out concealed conduit ec. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc for reuse at site complete all as specified and as directed. Note : To be measured only when found serviceable in all respects complete for reuse

M&L for Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC concealed conduit 20mm dia medium duty with all accessories including fabricated 1.6 mm thick MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan/call bell point/ Switch socket outlet 5 amps complete all as specified and as directed. Note: (i) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (ii) Cutting Chases pinning shall be measured and paid separately under relevant item of Sch A

All as per item No 85 here-in-before but one 3 pin 5 amps switch socket out let on the independent board with other switch complete all as specified and directed by Engineer-in-charge.

All as per item No.85 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge.

M&L fo Point wiring surface type with 2.5 sqmm (Nominal Area) PVC insulated stranded single core unsheathed FRLSH copper conductor cable 1100 Volts grade drawn through with and including PVC concealed conduit 20mm dia medium duty with all accessories (like Tee, Bend etc) complete fixed to walls / ceiling etc with and including 2.5 Sqmm (nominal area) PVC insulated unsheathed, stranded, single core FRLSH copper cable as earth continuity wire connecting to common earth point (including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC /plastic laminated sheet, top cover suitable sizes of brass screws and washers etc. for mounting sockets for 5 pin, 16 Amp Switch socket combination on independent board complete all as specified and directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board..

M&L Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan /call bell point/ Switch socket outlet 5 amps complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board..

All as per item No. 89 here-in-before but one 3 pin 5 amps switch socket outlet on the independent board with other switch complete all as specified and directed by Engineer-in-charge.

All as per item No. 89 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge.

M&L fo Point wiring surface type with 2.5 sqmm (Nominal Area) PVC insulated stranded single core unsheathed FRLSH copper conductor cable 1100 Volts grade drawn through with and including PVC casing caping with all fittings and accessories of casing caping (like Tee, Bend etc) complete fixed to walls / ceiling etc with and including 2.5 Sqmm (nominal area) PVC insulated unsheathed, stranded, single core FRLSH copper cable as earth continuity wire connecting to common earth point (including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC /plastic laminated sheet, top cover suitable sizes of brass screws and washers etc. for mounting sockets for 5 pin, 16 Amp Switch socket combination on independent board complete all as specified and directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board..

S&F Switch piano, flush type, Single pole one way, 5/6 Amps 230/240 Volts, white/ivory finish complete all as specified and directed.

Fixing only Switch piano, flush type, Single pole one way, 5/6 Amps 230/240 Volts, white/ivory finish (as retrived againsttakinng down complete all as specified and directed.

S&F Switch socket combination multipurpose 2 in 1, 3 pin 6 Amps 230/240 volt flush type complete all as specified and as directed.

Fixing only Switch socket combination multipurpose 2 in 1, 3 pin 6 Amps 230/240 volt flush type (as retrived against taking down complete all as specified and as directed.

S&F Fixing switch socket outlet combination multipurpose 3 pin 16 amp and one 3 pin 6 amp 5 in 1 controlled by one switch complete all as specified and as directed.

Fixing only Switch socket combination 5A/ 16A, 5 in 1flush type (as retrived againsttaking down complete all as specified and as directed.

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings including 9 w LED bulb complete all as specified and as directed.

S&F Ceiling Rose, surface bakelite 65X35mm, three terminals complete all as specified and directed.

Fixing only Ceiling rose any type (as retrived against taking down complete all as specified and direct.

S&F Ceiling fan regulator electronic stepping type, SP 230 Volts, suitable for 1200 mm/1400 mm sweep ceiling fan including necessary electric connection complete all as specified and directed.

S&F Call bell, ding dong AC 230 volts, single pole complete all as specified and as directed.

S&F Bell/buzzer push 5/6 amps, flush type, white/ivory finish complete all as specified and as directed.

Supply and fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete with double pole MCB of 20 amps complete all as specified and as directed.

Supply and fixing of three pole and neutral enclosure with a three pin and earth plug and socket complete with TPN MCB of 40-63 amps complete all as specified and as directed.

Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten polycarbonate houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection complete all as specified and as directed.

S&F LED light fitting 1x 9 W, 230 V, 2 feet with extruded aluminium housing with integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fix for Recessed mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt LED CDL light, complete all as specified and as directed.

S&F Street light fittings 1x 25 W New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver with 1.5 M long suitable size complete all as specified and as directed.

Taking down and refixing only LED Fitting of any type and any Size after minor repair and making good disturb surface as per exiisting complete all as specified and directed.

S&F Street light bracket made out of 32 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one complete all as specified and as directed.

Taking down unserviceable rusted / damaged MCB DBs of any type and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed.

S&F MCB TPN DB made up with sheet metal double door, phosphorised, power coated, neutral link, earth bar and din rail, 4 way TPN with 200 amps rated bus bar,415 volts complete all as specified and as directed.

S&F Sheet metal double door enclosure for DB's when MCBs to be used 12 way single pole and neutral double door with 200 amps rated bus bar complete including connection complete all as specified and as directed.

S&F Sheet metal double door enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete including connection complete all as specified and as directed.

Supply and fixing in proper position MCB TPN 63 amp capacity ,C- Curve, 415 Volts with 10 kA breaking capacity all as specified and as directed.

S&F MCB Single pole and neutral 240 Volt 20 to 40 Amp capacity C- Curve, with 10 kA breaking capacity complete all as specified and directed.

S&F MCB 6 to 32 Amps, SP, 240 Volts ,C- Curve breaking capacity 10 KA complete all as specified and as directed.

Taking down old burnt/unserviceable submain wiring with aluminum/copper conductor PVC insulated cable of any size drawn through PVC casing caping/ PVC Conduit pipe including GI wire accessories etc. and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 6.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 6.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings complete all as specified and as directed. Note:- Two runs of 6 Sqmm conductor as main wire and one run of 6 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.

M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 4.0 Sqmm as earth lead drawn into rigid non metalic PVC conduit of size 20 mm dia including all fittings complete all as specified and as directed. Note:- Two runs of 4 Sqmm conductor as main wire and one run of 4 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit.

Excavation in trenches not exc. 1.50 Mtr wide and not exc. 1.50 m deep and getting out in soft/loose soil for laying of pipe line complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Supply, laying, jointing and testing of Ductile iron (DI) pipes 150 mm bore with spigot and socket ends, centrifugally cast, class K-7 as per IS:8329-2000 and other relevant standards including material and labour for push on EPDM/SBR Rubber gasket joint in any length laid in trenches complete all as specified and as directed. Note :- DI fittings and earth work will be measured and paid under relavant item of this schedule

Supply, laying, jointing and testing of Ductile iron (DI) pipes 100 mm bore with spigot and socket ends, centrifugally cast, class K-7 as per IS:8329-2000 and other relevant standards including material and labour for push on EPDM/SBR Rubber gasket joint in any length laid in trenches complete all as specified and as directed. Note :- DI fittings and earth work will be measured and paid under relavant item of this schedule

Material and labour for CI/DI fittings such as Bends, Tapers, Tees, Branch (Single or double branch), connecting pieces etc., any type and angle/ radius etc., confirming to IS 9523-2000 for DI Pipe upto 200 mm bore complete all as specified and as directed.

Supply and fixing / laying of GI pipe medium grade 50 mm dia including all fittings such as bend ,tee , elbow , union , reducer , tee reducer etc laid or fixing/clamping on floor /surface/air/wall complete all as specified and directed.

Supply and fixing / laying of GI pipe medium grade 25 mm dia including all fittings such as bend ,tee , elbow , union , reducer , tee reducer etc laid or fixing/clamping on floor /surface/air/wall complete all as specified and directed.

Supply and fixing / laying of GI pipe medium grade 20 mm dia including all fittings such as bend ,tee , elbow , union , reducer , tee reducer etc laid or fixing/clamping on floor /surface/air/wall complete all as specified and directed.

Material and labour for fixing GM globe/gate valve 50 mm bore with iron wheel head, screwed both ends for iron/PPR pipes, ISI marked, conf to IS complete all as specified and directed by Engr in charge. Note: Union or long screw have to provided before fixing of gate valve if required.

Material and labour for fixing GM globe/gate valve 25 mm bore with iron wheel head, screwed both ends for iron/PPR pipes, ISI marked, conf to IS complete all as specified and directed by Engr in charge. Note: Union or long screw have to provided before fixing of gate valve

Material and labour for fixing GM globe/gate valve 20 mm bore with iron wheel head, screwed both ends for iron/PPR pipes, ISI marked, conf to IS complete all as specified and directed by Engr in charge. Note: Union or long screw have to provided before fixing of gate valve

Supply and fix cast iron sluice valve 150 mm bore with stainless steel spindle and cast iron hand wheel complying with IS : 14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber gasket joints, nuts, bolts & washers of required size & Nos complete including removing of old unserviceable one of following bore size complete all as specified and as directed.

Supply and fix cast iron sluice valve 100 mm bore with stainless steel spindle and cast iron hand wheel complying with IS : 14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber gasket joints, nuts, bolts & washers of required size & Nos complete including removing of old unserviceable one of following bore size complete all as specified and as directed.

M&L for construction of valve chamber of size1200 x 1200 x1200 mm internal dimensions, 3 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40mm x 40mm x 5 mm thick with lifting hook and locking arrangement complete with necessary earth work 230 mm thick, brick work in CM (1:6), PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces complete all as specified and directed.

Labour only for cutting of CI/DI/GI pipe 50 to150 mm dia carefully in position for repairs or inserting fittings such as bend, tee, socket pieces, collar etc; complete all as specified and as directed. Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embossed with contractor's firm name while carrying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

Chinmay Traders (BID ID -3112437)

D G Corporation (BID ID -3124823)