Constructing kitchen and Bathroom of Beldar quarter No. 3 in Canal Colony Tajewala.

Amount

Dismentaling Stone Masonry Rubble Stone Masonry in Lime

Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres.

Cement Concrete 1:3:6 with stone Aggregate 20mm nominal size in foundation and plinth.

First class brick laid in cement sand mortar 1:6 in foundation and plinth.

First class brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

Cold twisted deformed (ribbed/tor steel) bars for R.C.C. works, where nt included in the complete rate of R.C.C including bending, binding and placing in position complete.

Cement concrete 1 :2 : 4 with stone aggregate 20 mm nominal size for reinforced concrete work but excluding steel reinforcement centring and shuttering in foundation and plinth.

Shuttering for faces of concrete foundation and foundation beams ( vertical or battering )

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20cm thickness (straight and curved) beams, girders, stairs, columns, (Square or rectangular) batterns and lintels etc excluding steel reinforcement but including centring and shuttering, laid in position complete in all respect.

Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel enforcement, but including centring and shuttering laid in position, complete in all respect.

Earth work filling in tiba sand from as average Lead of 8 km filling in 15cm Layer.

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling.

Wiring in 1.5 sqmm PVC insulated copper conductor cable in 1.6 mm thick conduit pipe Light Point

Wiring in 1.5 sqmm PVC insulated copper conductor cable in 1.6 mm thick conduit pipe 3 Pin 5 Amp Plug Point

Wiring in 1.5 sqmm PVC insulated copper conductor cable in 1.6 mm thick conduit pipe 15 Amp Plug Point

12 mm Cement Plaster 1:6 on Wall

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (to the approval of the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUIT WITH NONCONCEALED ‘P’ OR ‘S’ TRAP with or without vent and all other necessary fittings as fully described in item no.30.3 above Single colour

Providing and Fixing in position C.P. Brass stop cocks (as approved by Engineer in charge) 15mm stop cocks, concealed stop cock with flange

Providing and fixing of accessories approved make by engineer-in-charge. Long Body Bib cock

Providing and fixing of accessories approved make by engineer-in-charge. Short Body Bib cock sparrow with permix and flange

Labour for laying, jointing, fixing and testing G.I/P.V.C/W.I Pipe lines and specials tees bands sockets Elbow etc. inside building and testing etc. complete including cutting threading Including cost of specials 15mm internal diameter of pipeline

Supply of P.V.C Pipe of 15mm Dia

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete: - door and window frame of size 114 mm X 50 mm with 35 mm wide double rebate

Commercial hard wood such as hillock champ, chikrassy and chaplash, etc, (non coniferous timber other than teak conforming to I.S. specification No. 1003 kiln seas oned), shutters with vertical styles and rails as specified in the statement No. 1 (attached in the end of this chapter), with two Nos. plywood panels of the specified thickness, mentioned below, tongued and grooved including the cost of iron hinges, screws chocks/cleats, stops, etc., complete fixed in position excluding the cost of tower bolts and handles but including the labour for fixing the same 35 mm thick (12 mm thick commercial plywood panel)

Wire gauze commercial hard wood such as hollock,champ,chikrassy etc. (non-conife- rous timber other than teak conforming to I.S.specification No. 1003 kiln seasoned) door and window shutters without springs housed in chowkats including chocks, iron hinges and screws, etc., complete fixed in position (excluding the cost of tower bolts, and handles but including the labour for fixing the same ) 30 mm thick

Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete.

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work.

Applying pink primer or aluminum priming coat on wood work including preparation of surface, knotting and stopping etc.

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.

Providing and fixing ceramic tiles/anti skid tiles of size 400mm × 400 mm or above size of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand morter 1.3 and jointed with white cement slurry mixed with pigment to match the shade to tiles.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to I.S. 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. Size of ceramic Glazed tiles 300 × 450mm

Terracing consisting of tiles 22.86 cm × 11.43 cm × 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and another layer of mud morter for laying the tiles, including two coats of bitumen laid hot at 1.65 Kg. per sqm on top of R.C.C. slab including grouting with cement sand morter 1:3 and top surface to be left clean etc.

Providing and fixing Hdpe Water storage Tanks of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge. (Except civil work). 500 Ltr. Capacity

Providing and fixing in position best quality stainless steel sink with complete fitting size 530mmx450mmx1758mm

Vinod Kumar

DIVEDI CONSTRUCTION WORKS

Raghbir singh Construction company