General Funds 2025-2026

Earthwork in Excavation for Structures as per drawing and Technical Specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious Material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable Material as per Technical Specification 305 MORD / 304 MORTH for foundations of C.C Drains and Culverts, Pipeline Trenches Ordinery soils-Mechanical Means upto 3.00m Depth.

Earthwork in Excavation for Structures as per drawing and Technical Specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious Material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable Material as per Technical Specification 305 MORD / 304 MORTH for foundations of C.C Drains and Culverts, Pipeline Trenches Ordinery soils-Manual Means upto 3.00m Depth.

Filling with Sand in Trenches, Sides of Foundations and Basement with Initial Lead in Layers Not Exceeding 15cm thick, Consolidating each Deposited Layer by Watering and Ramming Including Cost and Conveyance of Water to Work Site and All Operational, Incidental, Labour Charges, Hire Charges of T & P etc., Complete for Finished Item of Work. (APSS NO. 309 & 310).

Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 8 Kg / Sqcm - HDPE PE 100 grade.

Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure.

Supply & Delivery of Pipe Ends Long Neck 90mm Dia HDPE Fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete.

Supply & Delivery of MS Flanges 90mm Dia HDPE Fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete.

Supply & Delivery of Bends 90mm Dia HDPE Fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete. Bends 90mm Dia.

Supply & Delivery of Tees 90mm Dia HDPE Fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete.

Supply & Delivery of End Cap 90mm Dia HDPE Fittings conforming to IS 4984 - 1995 including transportation to any where in A.P, excluding excise duty, sale tax and specials etc., complete.

Supply & Delivery of Bolts and Nuts With Double Washers Including Taxes and Conveyance etc., complete. (1/2" TO 1")

Supply and delivery of 80 mm dia meter "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Bodyand Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN- 3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and per IS:1538. PN16 including transportation.

Lowering, keeping in position and fixing 80 mm dia meter of C.I Sluice Valves (with Cap / with Hand Wheel & Reflex Valves) excluding cost of Bolts, Nuts, Rubber insertion, sluice valve and tail pieces.