Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
29 Dec 2025, 11:00 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
No
90 days
Expenditure
General
78
2 conditions
I/We engage to supply the Western Railway with the articles specified above upon the terms of the Indian Railway Standard Conditions of Contract (latest revision) and upon the terms of the Revised Special Conditions and Instructions for the Guidance of the Contractors issued by the Western Railway (Instructions to tenderers & General Condition of Contract revised on September 2021 version 2021/1) available at IREPS portal at linkwww.ireps.gov.in/ireps/upload/repository/railway/483/148/public/TenderConditionsVersion2021- 1.pdf.
FOR DESTINATION ONLY, FIRM TO UNLOAD THE MATERIAL AT DESTINATION AT CONSIGNEE DOORSTEP @ DY.CMM/WS/BVP DEPOT OTHERWISE OFFER WILL BE BYPASSED.
29 conditions
Earnest Money Deposit [EMD] will be NIL as per Rly. Board letter no.2004/RS(G)/779/11/PT Dtd. 23/12/2019. as estimated value up to Rs. 25 Lakhs.
Security Deposit: The rate of SD, exemptions and other conditions will be as per Para 8 of Instructionsto tenderers & General Condition of Contract, revised on September 2021 version 2021/1 available atIREPS portal at link www.ireps.gov.in/ireps/upload/repository/railway/483/148/public/TenderConditionsVersion2021- 1.pdf. and https:// indianrailways.gov.in/railwayboard/uploads/directorate/stores/downloads/circular/2021/Security- Deposit-31122021.pdf
LIQUIDATED DAMAGE (LD) ON DELAYED SUPPLY: For delayed supplies, Recovery of Liquidated Damage(LD) shall be levied @1/2% (half percent) of the price of the store per week or part of the week during which delivery is accepted and the upper limit for recovery of LD in supply contracts is 10%(ten percent) of the value of contract irrespective of delays, unless otherwise provided, specifically in the contract.
Offer validity shall be 90 days from the date of opening of the tenders.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
On rejection of material firm has to pay 2% incidental charges + Ground Rent + Inspection / Lab Testing charges before lifting of rejected material from depot.
Firm has to pay General Damage towards Purchase Order Cancellation for non-supply of material within stipulated delivery period is equivalent to security deposit as per latest guidelines issued by the Railways.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Offer with large DP may be considers unresponsive offer. Railway reserve the rite disqualified the bidder on this basis.
Material must confirm required specification mentioned on indent description.
Firm is to submit their offer in accordance with Tender Description and Annexure only.
1 location across Gujarat
Impact and Cut resistance hand gloves.
78255546B~WR
78255546B
Open - Indigenous
Goods
Bhavnagar, Gujarat
₹0
Exempted
29 Dec 2025
13 Dec 2025
Description :Impact and Cut resistance hand gloves with anti slip coating on palm conforming to specification EN 388:2016 - 4544 DP as per The product sha ll conform to the standard EN 388:2016 - 4544 DP: (i)Abrasion resistance: 4 (ii)Cut resistance, Coup test: 5 (iii)Tear resistance: 4 (iv)Puncture resistance: 4 (v) Cut resistance, TDM Test: D (vi)Impact resistance: P (vii)Liner material: 13 Gauge UHMWPE (Ultra High molecular weight polyethylene) (viii)Sandy Nitrile coati ng on palm to resist slip and improve grip and thermo plast rubber padding on the back and fingers safeguard knuckles from unexpected impact and abrasion. (x)Velcro adjustable strap on the wrist, thumb crotch for added protection and seamless knitted liner. (xi)Washable (xii) Size no: 10 Note (a) OEM or OEM auth orization certificate will be provided at time of offer. (b) Sample of each size to be approved before bulk supply. (c) Copy of Certificate of compliance to protec tion level as per standard from NABL accredited Lab/ Govt approved laboratory/ International certifying body /Manufacturers test certificate (Original) shall be provided along with the supply. (d) MAKE: Udyogi TPR 9004 Model/Mallcom/3M/Black and Decker/Delta plus [ Warranty Period: 12 Months after the date of d elivery ] ] SENIOR SECTION ENGINEER MACHINE SHOP Gujarat 360.00 Pair Consignee BHAVNAGAR, WR
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .