DEVELOPMENT OF SHREE YAHAMOGI MATAJI TEMPLE CAMPUS AT DEVMOGRA PHASE II, DIST:NARMADA

Bill of Quantities

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Clearing and grubbing road land including uprooting rank vegetation

grass bushes,shrubs,sapling and trees girth up to 300 mm removal of

stumps of trees cut earlier and disposal of unserviceable materials(A) By

manual means in area of light jungle

Carryout Soil Investigation work including exploratory drilling of

mm dia borehole in all sorts of soil& Rock up to 10m depth from G.L,

collecting undisturbed samples at an interval of 1.5 m. depth,

determining depth of water table etc. Conducting necessary laboratory

tests for all type of classification and determination of soil parameters

necessary for determining pile capacity like density, shear and

2 consolidation parameters etc., including submission of report in three Job 1.00 44,844.00

copies covering investigation data and recommendation for SBC etc. all

as per specification at required location

Contour survey work for prepaing contour maps by taking cross-section

at every 30M. intervals including all, labour materials and instruments.

This item includes the submission of autocad file of total site survey, etc

complete as per detailed, directed & approved by the consultant / EIC

Running of reqiured capacity pump for dewatering of surface water

4 including arrangement of pump suction and delivery pipes and other 2250.00 20.20

accessories at site including POL. HP/Hr

Excavation for foundation upto 1.5 m depth including sorting out and

5 stacking of useful materials and disposing off the excavated stuff upto Cmt 2294.00 275.33

50 Meter lead..(C) Hard Murrum

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

6 excavated stuff up to 50 Meter lead.(C) Hard Murrum, etc. complete as Cmt 2203.00 294.05

per detailed & directed by EIC.

Excavation for foundation for depth from 3.0 m to 5.0 m including

sorting out and stacking of useful materials and disposing of the

7 excavated stuff upto 50 Meter lead.(C) Hard Murrum Cmt 1446.00 307.16

Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

8 consolidating each disposited layer by ramming and watering. Cmt 4717.00 137.47

Filling in foundation and plinth with murrum or selected soil in layers of

9 20cm. thickness including watering, ramming and consolidating etc. Cmt 11250.00 304.60

complete. (more than 10 ton)

Carring out plinth treatment to post construction /existing structure by

spraying chemical solution for termite control treatment including

labour and material consistment with I.S.I specification. Using Chlordene

and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one

percent is recommended i.e one litre 20 EC chemical emulsion with

10 liter give 1% concrentration inclusive of one litre chemical emulsion Smt. 1062.00 36.94

appication at the rate of 5 Litre chemical /Sqm of sur face is

recommended as per I.S

Providing and laying rubble (each stone weighting not less than 40Kg.)

11 including and packing and filing in the interestices with quarry-spalls. Cmt 159.00 1,092.52

Providing and laying cement concrete 1:2:4 (1- Cement : 2-Coarse sand

: 4- graded stone aggregates 20 mm nominal size) and curing complete

12 excluding cost of formwork in (A) Foundation and Plinth Cmt 362.00 3,591.22

Architect: ARG Creation PVt. LTD. 1 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and laying controlled cement concrete M.250 and curing

complete Including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in (A) Foundations, Raft

footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M:25 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement : Column Up to Plinth Level

Providing and laying controlled cement concrete M:250 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (D) For Columns for

any type of cross sectional area at Ground Floor lvl. etc., for any type of

cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:250 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (D) For Columns for

any type of cross sectional area at First Floor lvl. etc., for any type of

cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:250 and curing

complete including cost of necessary, form work, compacting with

17 vibrator curing centering & shuttering in true line and level etc, but Cmt. 35.50 8,365.95

excluding the cost of reinforcement for RCC work in (D) For Columns for

any type of cross sectional area at Second Floor lvl. etc., for any type of

Providing and laying controlled cement concrete M:250 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (D) For Columns for

any type of cross sectional area at Third Floor lvl. etc., for any type of

cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M:250 and curing

complete including cost of necessary, form work, compacting with

vibrator curing centering & shuttering in true line and level etc, but

excluding the cost of reinforcement for RCC work in (D) For Columns for

any type of cross sectional area at Terrace Floor lvl. etc., for any type of

cross section area complete as directed by E. I. C.

Providing and laying controlled cement concrete M.250 and curing

complete Including the cost of formwork but excluding the cost of

20 reinforcement for reinforced concrete work in Beams upto floor two Cmt. 109.00 6,313.51

level: PLINTH BEAM

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork but excluding the cost of

21 reinforcement for reinforced concrete work in © Slabs upto floor two Cmt. 60.50 4,709.63

level. : Grade slab

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork but excluding the cost of

22 reinforcement for reinforced concrete work in (B) Walls below the plinth Cmt. 61.50 6,655.90

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork but excluding the cost of

23 reinforcement for reinforced concrete work in (B) Walls, for Ground floor Cmt. 24.50 6,695.48

Architect: ARG Creation PVt. LTD. 2 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in (B) Walls, Extra for

24 additional lift of concrete for all R.C.C. work above floor two level Cmt. 10.50 6,735.06

excluding cost of reinforcment for First floor

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in (B) Walls, Extra for

25 additional lift of concrete for all R.C.C. work above floor two level Cmt. 10.50 6,774.65

excluding cost of reinforcment for Second floor

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in (B) Walls, Extra for

26 additional lift of concrete for all R.C.C. work above floor two level Cmt. 10.50 6,814.23

excluding cost of reinforcment for Third floor

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in (B) Walls, Extra for

27 additional lift of concrete for all R.C.C. work above floor two level Cmt. 10.50 6,853.81

excluding cost of reinforcment for Terrace floor

Providing and laying controlled cement concrete M.250 and curing

complete Including the cost of formwork but excluding the cost of

28 reinforcement for reinforced concrete work in Lintels / Copping for all Cmt. 16.00 6,313.51

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in © Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. :

Ground Floor Staircase

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in © Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. :

First Floor Staircase

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in © Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. :

Second Floor Staircase

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in © Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever upto floor two level. :

Third Floor Staircase

Providing and laying controlled cement concrete M.250 and curing

complete Including the cost of formwork but excluding the cost

33 ofreinforced concrete work in © Beams upto floor two level. . : GROUND Cmt. 116.00 6,785.18

Providing and laying controlled cement concrete M.250 and curing

complete Including the cost of formwork but excluding the cost

34 ofreinforced concrete work in © Beams upto floor two level. . : FIRST Cmt. 79.00 6,824.63

Providing and laying controlled cement concrete M.250 and curing

complete Including the cost of formwork but excluding the cost

35 ofreinforced concrete work in © Beams upto floor two level. . : SECOND Cmt. 75.00 6,864.08

Architect: ARG Creation PVt. LTD. 3 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and laying controlled cement concrete M.250 and curing

complete Including the cost of formwork but excluding the cost

36 ofreinforced concrete work in © Beams upto floor two level. . : THIRD Cmt. 75.00 6,903.53

Providing and laying controlled cement concrete M.250 and curing

complete Including the cost of formwork but excluding the cost

37 ofreinforced concrete work in © Beams upto floor two level. . : TERRACE Cmt. 13.50 6,942.98

Providing and laying controlled cement concrete M.250 and curing

complete Including the cost of formwork but excluding the cost of

38 reinforced concrete work in (C) Slabs upto floor two level. :Ground floor Cmt. 269.00 6,794.27

Providing and laying controlled cement concrete M.250 and curing

complete Including the cost of formwork but excluding the cost of

39 reinforced concrete work in (C) Slabs upto floor two level. :FIRST floor Cmt. 108.50 6,833.72

Providing and laying controlled cement concrete M.250 and curing

complete Including the cost of formwork but excluding the cost of

40 reinforced concrete work in (C) Slabs upto floor two level. : SECOND Cmt. 102.00 6,873.17

Providing and laying controlled cement concrete M.250 and curing

complete Including the cost of formwork but excluding the cost of

41 reinforced concrete work in (C) Slabs upto floor two level. : THIRD floor Cmt. 102.00 6,912.62

Providing and laying controlled cement concrete M.250 and curing

complete Including the cost of formwork but excluding the cost of

42 reinforced concrete work in (C) Slabs upto floor two level. : TERRACE Cmt. 13.00 6,952.07

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

43 bending, binding and placing in position complete upto all floor level. kg 225727.50 77.29

Supplying and fixing of GRC Jharokha Type 1 as per Image &

44 specification and complete as per detailed drawing & Directed by EIC. Nos. 27.00 40,920.45

Supplying and fixing of GRC Jharokha Type 2 as per Image &

44 specification and Size and complete as per detailed drawing & Directed Nos. 18.00 123,619.46

Supplying and fixing of GRC Column as per Image & specification and

44 Size and complete as per detailed drawing & Directed by EIC. Nos. 27.00 34,162.95

Supplying and fixing of GRC Arch type 1 as per Image & specification

44 and Size and complete as per detailed drawing & Directed by EIC. Nos. 10.00 12,066.98

Supplying and fixing of GRC Arch type 2 as per Image & specification

44 and Size and complete as per detailed drawing & Directed by EIC. Nos. 30.00 6,972.03

Supplying and fixing of GRC Dome like structure as per Image &

44 specification and Size and complete as per detailed drawing & Directed Nos. 1.00 268,155.00

Supplying and fixing of GRC Railing as per Image & specification and

44 Size and complete as per detailed drawing & Directed by EIC. Nos. 60.00 5,899.41

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

45 Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional : Plinth Cmt 89.50 4,310.73

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Extra

46 for brick work in superstructure above plinth level upto floor two level Cmt 246.00 4,599.16

Item No. 1(6.12) (B) Conventional : Ground Floor

Architect: ARG Creation PVt. LTD. 4 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Extra for

brick work in superstructure above plinth level upto floor two level Item

No. 1(6.12) (B) Conventional Extra for brick work in superstructure

above floor two level Item No. 1(6.12) (B) Conventional : First Floor

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Extra for

brick work in superstructure above plinth level upto floor two level Item

No. 1(6.12) (B) Conventional Extra for brick work in superstructure

above floor two level Item No. 1(6.12) (B) Conventional : Second Floor

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Extra for

brick work in superstructure above plinth level upto floor two level Item

No. 1(6.12) (B) Conventional Extra for brick work in superstructure

above floor two level Item No. 1(6.12) (B) Conventional : Third Floor

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Extra for

brick work in superstructure above plinth level upto floor two level Item

50 No. 1(6.12) (B) Conventional Extra for brick work in superstructure Cmt 117.50 4,771.50

above floor two level Item No. 1(6.12) (B) Conventional : Terrace Floor

(ii) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 (1-

Cement : 5 -coarse sand ) in foundation and plinth (B) Conventional

Extra for half brick masonry in superstructure above plinth level upto

floor two level. (B) Conventional : Ground Floor

(ii) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 (1-

Cement : 5 -coarse sand ) in foundation and plinth (B) Conventional

Extra for half brick masonry in superstructure above plinth level upto

52 floor two level. (B) Conventional Extra for brick work in superstructure Smt 319.00 729.07

above floor two level Item No. 5 (B) Coventional : First Floor

(ii) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 (1-

Cement : 5 -coarse sand ) in foundation and plinth (B) Conventional

Extra for half brick masonry in superstructure above plinth level upto

53 floor two level. (B) Conventional Extra for brick work in superstructure Smt 394.00 772.16

above floor two level Item No. 5 (B) Coventional : Second Floor

(ii) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 (1-

Cement : 5 -coarse sand ) in foundation and plinth (B) Conventional

Extra for half brick masonry in superstructure above plinth level upto

54 floor two level. (B) Conventional Extra for brick work in superstructure Smt 394.00 815.24

above floor two level Item No. 5 (B) Coventional : Third Floor

Architect: ARG Creation PVt. LTD. 5 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

(ii) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 (1-

Cement : 5 -coarse sand ) in foundation and plinth (B) Conventional

55 Extra for brick work in superstructure above floor two level Item No. 5 Smt 143.50 858.33

(B) Coventional : Terrace Floor

Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved

size applying between the RCC and masonry junction in proper line,

level and plumb with all material, labour, tools, tackles and equipment.

56 Including providing and fixing the jali with nails, etc complete as Smt 1531.50 254.52

directed by the site-in-charge.

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

57 floor two level and finished even and smooth in (ii) Cement mortar 1:4 Smt 3690.00 179.56

(1-cement :4-sand) : Ground Floor

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand) Extra over items 1 to 69, 71 to 87 and 90 for

interior plastering above floor two level for every additional storey

height. (1) Single coat plaster: First Floor

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand) Extra over items 1 to 69, 71 to 87 and 90 for

interior plastering above floor two level for every additional storey

height. (1) Single coat plaster: Second Floor

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand) Extra over items 1 to 69, 71 to 87 and 90 for

interior plastering above floor two level for every additional storey

height. (1) Single coat plaster: Third Floor

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (ii) Cement mortar 1:4

(1-cement :4-sand) Extra over items 1 to 69, 71 to 87 and 90 for

interior plastering above floor two level for every additional storey

height. (1) Single coat plaster: Terrace Floor

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

62 smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Ground Floor Smt 1148.00 135.44

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

63 smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) First Floor Smt 748.00 159.90

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

64 smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Second Floor Smt 702.00 184.37

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

65 smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Third Floor Smt 702.00 208.83

Architect: ARG Creation PVt. LTD. 6 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing 10mm thick cement plaster in single coat on brick/concrete

walls for interior plastering upto floor two level and finished even and

66 smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Terrace Floor Smt 87.00 233.29

Washed stone grit plaster on exterior walls height upto 10 metre above

ground level, in two layers, under layer 12 mm cement plaster 1:4 (1

cement : 4 coarse sand ), furrowing the under layer with scratching tool,

applying cement slurry on the under layer @ 2 Kg of cement per square

metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse

sand : 2 stone chipping 10 mm nominal size), in panels with groove all

67 around as per approved pattern, including scrubbing and washing the Smt 2189.00 1,173.87

top layer with brushes and water to expose the stone chippings

,complete as per specification and direction of Engineer-in-charge.

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3

(1- cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) etc. complete as approved and directed by Consultant

Providing & laying average 18-20mm thick double coat water proof

smooth/ wired finish cement plaster on sides of masonry work/ block

wall/ RCC wall, 12 to 15mm thick first coat in CM 1:3 (1 cement :

coarse sand) by spraying, second coat of 6mm of CM 1:3 (1 cement :

fine sand) and mixing water proofing compound powder & liquid of

approved make in recommended proportions (by manufacturers) in both

coats including finishing with a flooting coat of neat cement slurry etc

complete for all floor. and shall be guaranteed for minimum period of

10 years after handing over the completed building by the main

69 contractor to be finished as directed. Stamp paper guarantee 10 years to Smt 528.00 339.97

be furnished before receiving any payment from the client.

Waterproofing powder & liquid of approved make recommended

proportions is to be applied before each coat and final finishing coat.

(Item shall be operated for water retaining structures, sunks, basement

walls and other places specified by Architect/ EIC ).

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling

70 of existing flooring and jointed with color cement slurry including Smt 821.00 1,521.95

finised with flush pointing & cleaning the surface etc. complete for light

shade / Dark Shade

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling

71 of existing flooring and jointed with color cement slurry including Smt 729.00 1,472.91

finised with flush pointing & cleaning the surface etc. complete for

Providing and laying Vitrified tiles 8 to 10 mm thick as per required size

, in skrting risers of steps and dedo on 10mm thick cement plaster 1:3

72 (1-cement : 3-coarse sand) and jointed with white cement slurry Smt 1979.00 1,195.02

Providing & Laying Green Polished Kota Stone for flooring over 25mm

(average) thick base of CM 1 : 6 (1 cement : 6 sand) Laid over & jointed

with neat grey cement slurry including filing the joint with white /

colour cement, complete in true line & level / slope, cleaning & rubbing,

& for wall cladding, risers of steps, Dado & pillars laid on 10mm thick

73 cement mortar 1:3 (1-cement :3-coarse sand) & jointed with grey Smt 399.00 1,531.92

cement slurry, groove and molding as directed etc. complete as per

detailed by architect & directed by Engineer-In-Charge.

Architect: ARG Creation PVt. LTD. 7 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss]

polished at all exposed Surface, Pre-moulded and pre-polished,

machine cut Granite of any colour and shade, & finish, as per detailed by

architect /Consultantfor flooring, dado skirting, cladding, steps and

risers, kitchen platforms, vanity counters, window sills , fascias and

similar locations of required size, approved shade, colour and texture

laid over 20 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand).

And In dado/skirting on In dado/skirting on 12 mm thick mortar 1:4 (1

74 acid proof cement : 4 coarse sand), joints treated with white cement, Smt 1204.00 3,507.73

mixed with matching pigment, epoxy touch ups, including BSpacer tape

6.4 mm thick x 4 TO 6 mm as per detailed groove, rubbing, curing,

moulding and polishing to edges to give high gloss finish as per

concept etc. complete at all levels.

Providing and fixing 18 mm thick gang saw cut, Ruff [Send-blasted-

LAPORTA] polished in pattern & at all edges should be molded in

rquired finish, Pre-moulded and pre-polished, machine cut Granite of

any colour and shade, & finish & texture, as per detailed by architect /

Consultant, for flooring, dado skirting, cladding, steps and risers,

kitchen platforms, vanity counters, window sills , fascias and similar

locations of required size, approved shade, colour and texture laid over

20 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). And In

dado/skirting on In dado/skirting on 12 mm thick mortar 1:4 (1 acid

75 proof cement : 4 coarse sand), joints treated with white cement, mixed Smt 61.00 4,146.56

with matching pigment, epoxy touch ups, including Spacer tape 6.4 mm

thick x 4 TO 6 mm as per detailed groove, rubbing, curing, moulding

and polishing to edges [Ruff [Send-blasted- LAPORTA] polished] to give

high gloss finish as per concept etc. complete at all levels.

Providing and fixing 0.70 meter wide sandwich type platform including

supplying and fixing granite stone 18 mm thick mirror polished stones

in top and side position and vertical strip at front over 25 mm thick

polished kota stone platform fixing in top and sides and intermediates

76 supports fixing with cement mortar and adhesive and finishing Smt 107.00 6,899.08

including making recess for Kitchen/ Laboratory sink etc. complete as

approved and directed by Consultant / EIC.

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws (A)

Architect: ARG Creation PVt. LTD. 8 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing, supplying, fixing, fabricating, erecting, aligning the structural

steel like pivot ,tubular 'T', 'I" section, angle, plate, beam, channel

section, Bar , hollow box or Z purloins, Round or Square Pipes, of

approved make, for built up purloins, roof trusses, columns, side

runners, tie beams, sag rods, base plates gusset plates, cap plates,

bearing bracing, gantry girders, rails, require support, pipes, including

all welded or bolted steel structures of various types with approved I.S.I.

mark electrodes, bolts, anchor bolts including cost of thread, Anchor

plate cleats etc. in RCC or masonry work, including cutting, bending,

welding ,fixing, supplying , Fabricating Decorative fevisted section or

any structured member required to complete the job for Bridge,

78 Trusses, Canopy, doors, Frame, Railing, Entrance gate, pergola, Kg 25.00 131.83

Decorative hanging light , New window, parking shed or space frame or

any other required specified area as shown on drawing and detailed

specification or as per design incl. three coats of approved brand primer

and two coats of paints, necessary scaffolding, tools tolerance etc.

complete as directed by Engineer In Charge. (payment will be made for

weight of metal used in the work)

Fabricating, supplying and fixing in position SS railing for staircase and

balcony with brush finish and 304 grade as per Indian Standrd and

detailed drawing including grinding, cleaning and filling the welded

spots with SS railing (Only Length will be paid for payment heigth

max.1.0 mt.). The Work to be executed as per consultant drawing

Providing, fabricating and fixing STAINLESS STEEL HAND RAIL OF AISI-

304 grade using 50mm dia Stainless Steel pipe of 16 gauge, [top rail of

50 NB or nearest size complete] with complete assembly, bend and

coupler to be used as per architectural detail drawings for the railing in

parapet, stair etc. including fabricating, hoisting, fixing in position with

angle cleats, holdfast etc. in RCC or masonry in true line level and

plumb, including complete assembly, including matt polishing and

buffing complete, including scaffolding etc. complete as directed by

EIC.(Actual length of stair railing shall be measured at site & same shall

be paid. No wastage should be measured or paid.)

CEMENT CONCRETE ROAD WITH EXPANSTION JOINTS.: M250 Cement

Concrete laid in required slope at concrete floor as directed and

specified using necessary steel form work with M.S. Channels including

forming construction & contraction joints 4 mm to 6mm wide by cutting

the floor up to ¼ th depth of thickness of the concrete depth using

mechanical saw and sealing the joint with poly sulphide sealant up to

full depth of cutting including providing & fixing M.S. dowels bars with

bitumen painted of full length as shown in drawing as to form the bays

not exceeding 6.0 m X 4.5 m etc. complete as per directed by Architect

81 or Engineer-In-Charge. For all level and leads.(a) For RCC Road Note: Cmt 135.00 7,132.93

Rates are Incl. cost of Cement Concrete Pavement shall be 150mm. Thk.

or as detailed and rolling 2 times as per mentioned above and also all

tools tolerance, shuttering, channel, etc. complete as per detailed &

Directed by Architect & EIC.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

Architect: ARG Creation PVt. LTD. 9 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade

concret as per approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

Providing wood work in frames of Size 12.5 x 10 Cm. for doors,

windows, clerestory windows and other frames, wrought framed and

fixed in position with hold fast lugs or with dash fasteners of required

dia & length Incl. Providing and fixing 35 mm thick (or as specified) ISI

marked flush door shutters conforming to IS : 2202 (Part I) decorative

type, core of block board construction with frame of 1st class hard

wood, with 1mm. thk, ISI marked designed laminate in any finish on

both faces of shutters., slit openings with bidding Patti & 6mm thk

designed acid wash glass,. Stainless Steel butt hinges [125x65x2.5mm.

84 IS1281712] with necessary screws, using branded S.S. matt /glossy / Smt 681.00 7,949.10

platinum finished accessories, Colour / polishing all bidding parts, and

also incl. with all Material, labour, tools, tolerance, scaffolding etc.

complete as per concept /direction and approved by Architect, and

directed by Engineer-In-Charge.

Providing & Fixing Walnut anodized Aluminum Hi-Profile sections

(JINDAL-DOMAL Series), hI-perfomance Sliding/ Openable window with

Required thick glass of Saint Gobain or equielent, is used for Aluminum

Hi-Profile Section with necessary accessories and with additional shutter

with Stainless Steel Mosquito net. [In Opening Position always one of

Mosquito net shouter should be in Close Position], captive bead,

extremely difficult to remove once glazed, high performance weather

stripping, internal wedge gasket, Bottom, side and top section including

necessary filling up the gaps at junctions, with required EPDM rubber/

etc. and ISI ebco make,"Lx. Premium" Required Finish door fixture

Accessories As per Architect Concept, High security interlocking bead,

85 Sheet membrane flashing , 2" over jamb flashing, New Blocking with Smt 289.00 7,413.30

new backer rod and sealant, channel glide with runner, slide fold hinge

when ever need of sufficient capacity, with warranty, all types of

material, labour, transportation, tools tolerance and matching required

level with Flooring etc. complete as per Architect concept and as per

detailed by Architect / consultant & Directed by EIC.

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour Powder

86 Coated alluminium frame for ventilation with 5 mm thick frosted glass Smt 154.00 1,175.56

as details etc complete for Ventilation

Architect: ARG Creation PVt. LTD. 10 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of

primer at Wall painting (two coats) with plastic emulsion paint of

approved brand & manufacture on undecorated wall surfaces to give an

even shade including thoroughly brushing the surface free from mortar

droppings & other foreign matter & sand papered smooth, as per

detailed & directed by EIC.

Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of

primer at Ceiling painting (Two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated Ceiling surface to give

an even shade including thoroughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth,

as per detailed & directed by EIC.

Finishing wall with Weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

89 thoroughly brushing the surface to remove all dirt, and remains of loose Smt 346.00 122.14

powdered materials.etc complete.

Painting two coats (excluding priming coat) on new steel and other

metal surface with synthetic enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

matter.Painting two coats (excluding priming coat) on new steel and

90 other metal surface with synthetic enamel paint, brushing to give an Smt 745.00 69.15

even shade including cleaning the surface of all dirt, dust and other

foreign matter.

Providing and fixing roof panel shall be made out of 0.5 mm thick pre

coated GI sheet . The Precoated sheet shall be of minimum 240 mpa

steel grade confirming to IS 14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy primer on

both side of the sheet and polyester top coat 15-18 micron. The PPGI

Sheet shall have plastic protective guard film of minimum 25 microns to

91 avoid scratches during transportation. The ridge shall be fixed to the Smt 215.00 867.39

steel members by pop rivet or self drilling/self stitching fastners @

maximum 450 mm c/c along length of capping/flashing etc complete .

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x

10 mm) with SRI (solar refractive index) > 78, solar reflection >

and initial emittance > 0.75 on waterproof and sloped surface of

terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1

cement : 4 coarse sand) and grouting the joints with mix of white

92 cement & marble powder in ratio of 1:1, including rubbing and polishing Smt 1079.00 993.64

of the surface upto 3 cuts complete, including providing skirting upto

150 mm height along the parapet walls in the same manner.

Architect: ARG Creation PVt. LTD. 11 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Water proofing-Providing and applying primer + 2 coats of Single

component, high solids, cold applied liquid polyurethane elastomer

waterproof membrane over uniform surface of slab. Apply 2 coats at

dosage of 1.5 kgs per sqm to achieve the required minimum DFT of

1.5mm. It should have

following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ±

3. Elongation % ≥ 700%

93 4. Dosage 1.2 - 1.5 kg/m2 in two coats Smt 1079.00 979.14

5. Tack Free Time 24 - 48 hrs

6. Tensile Strength N/mm² ≥

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

Exterior cladding with cement bonded particle board confirming to

IS:14276. with the framing of same material of thickness 16 mm and

exterior cladding of 12mm thickness of required size as per Architect

concept and as per detail by Architect / consultant & Directed by EIC.

Supplying and fixing reinforced concrete heavy duty non pressure pipes

with collars for culverts carrying heavy traffic as per IS 458-1991

specifications including setting the pipes in C.M. 1:2 watering and

laying (to level or slopes) of class NP3 of following internal daimeters.(i)

Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe

confirming to IS 13592-1992 with one end plain & other end socket

with rubbering & Fixing conforming to ISI 14735-1999 of approved

make for drain system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using PVC clamps of

the size 160mm dia x 210mm length x 196mm high at every 2000mm

centre to centre or shall be concealed in wall as directed necessary

96 fittings such as bends, shoes, etc. incl. testing of pipe & joint & jointed Rmt 100.00 831.22

with adhesive solvent, cement incl. cost of all material etc. complete as

per detailed, directed & approved by the consultant / EIC. (A) 160mm

dia. etc. complete as per detailed, directed & approved by the consultant

Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR

type B pipe confirming to IS 13592-1992 with one end plain & other

end socket with rubbering & Fixing conforming to ISI 14735-1999 of

approved make for drain system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using PVC

clamps of the size 160mm dia x 210mm length x 196mm high at every

2000mm centre to centre or shall be concealed in wall as directed

necessary fittings such as bends, shoes, etc. incl. testing of pipe & joint

& jointed with adhesive solvent, cement incl. cost of all material etc.

complete as per detailed, directed & approved by the consultant / EIC.

Providing laying and jointing in true line and level 75mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Architect: ARG Creation PVt. LTD. 12 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing laying and jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Architect: ARG Creation PVt. LTD. 13 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & Fixing to wall, ceiling & floor 40mm dia. CPVC threaded

tubes of class SDR 13.5 /schedule 80 confirming to IS 13592 of the

following nominal bore including G.I. fittings as required for completion

103 of job, G.I. clamps including making good the wall, ceiling & floor etc. Rmt 300.00 442.04

complete as per detail & the instruction of EIC.

Providing & Fixing to wall, ceiling & floor 20mm dia. CPVC threaded

tubes of class SDR 13.5 /schedule 80 confirming to IS 13592 of the

following nominal bore including G.I. fittings as required for completion

104 of job, G.I. clamps including making good the wall, ceiling & floor etc. Rmt 300.00 205.00

complete as per detail & the instruction of EIC.

Providing & Fixing gun metal check or no return full way wheel valve

105 etc. complete as per the instruction of EIC. (C) 25 mm. Dia Each. 100.00 420.63

Providing & Fixing gun metal check or no return full way wheel valve

106 etc. complete as per the instruction of EIC. (E) 40 mm. Dia Each. 110.00 663.43

Providing and fixing screw down bib taps of following size.(A) Brass

107 screw down bib tap polished bright. (i) 15mm dia. Each. 110.00 186.83

Providing and fixing brass screw down stop tap.(C) 25mm dia.

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm

diameter with 150 mm X 150mm S.S.jali for floor or nahni trap of the

following nominal diameter of self cleansing design with C.I screed

109 down or hinged grating including the cost of cutting & making good the Each. 110.00 558.36

walls, as per detailed, directed & approved by the EIC.

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

110 (inside) with standard weight.(i) Square mouth traps. (A) 100mm x Each. 20.00 1,292.19

100mm size P type.

Constructing brick masonry chamber for underground C.I. Inspection

chamber & bends with bricks having crushing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm internal dimensions, total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C. top

slab with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

111 thick with cement mortar 1:3 finished smooth with a floating coat of Each. 15.00 2,932.93

neat cement on walls & bed concrete for (i) Inside dimensions 455mmx

610mm & 450mm deep for single pipe line. etc. complete as per

detailed, directed & approved by the consultant / EIC.

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix (

cement : 2 coarse sand :4 grade stone aggregate 20mm size )

foundation concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats

40 mm size ) inside plaster 15mm thick with CM 1:5 ( 1 cement :

Coarse sand ) finished with a floating coat of neat cement & making

channels in cement 1:2:4 mix ( 1 cement : 2 coarse sand :4 stone

aggregate 20mm nominal size ) finished smooth complete including

curing & testing… ( I ) inside 900mm x 1200 mm & 1.5 m deep

112 including R.c.c. cover with frame size 560 mm diameter ( A ) with Each. 20.00 19,330.46

230mm thick walls of brick masonry using brick having crushing

strength not less then 35 kg/sqcm in CM 1 : 5 ( 1 cement : 5 coarse

sand ), (2) B type depth 1.50 Meter for 150mm diameter sewer.. etc.

complete as per detailed, directed & approved by the consultant / EIC.

Architect: ARG Creation PVt. LTD. 14 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & Fixing white colour, Vitreous china, under / Over Counter

wash basin with single hole for pillar type with Cl or MS brackets

painted white including cutting holes, ranking bolts for Fixing &

marking good the same, including Fixing C.P. Brass waste coupling

32mm dia & Bottal trap & 15mm dia pillar tap, Bottle Trap, as approved,

capstan head C.P. screwed down high pressure with screw shank & back

113 nuts & rubber plugs, 15mm dia brass stop cock (50/75mm p.v.c. Drain Each. 95.00 2,787.60

connection pipe, Water Connection Pipe of required Size, & testing the

same for leak proof, etc. with all material & labours to complete this job

in all respected manners, etc. complete as per detailed & approved by

the consultant & directed by EIC.

Providing and fixing wash down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat and

cover for wash down water closer with C.P. brass hinges, C.P. brass

toilet paper holder, Jet Spray, Health Fauset Heavy duty with hook with

114 fitting, Metropole, Incl. Connection and rubber buffers. (A) Vitreous Each. 72.00 5,965.72

China., etc. complete as per detailed & approved by the consultant &

directed by EIC.

providing and fixing water closet squatting pan(Indian type W.C. pan )

size 580 mm of ESSCO Make including providing and fixing vitreous

china 100 mm size 'P' or 'S' trap including jointing the trap with pan and

soil pipe in CM (1:1) (1 cement :1 fine sand) etc complete. As per

115 instruction given by engineer in charge. (A) Vitreous China., etc. with all Each. 10.00 936.96

material & labours to complete this job in all respected manners, etc.

complete as per detailed & approved by the consultant & directed by EIC.

P/F approved brand Flat Back Urinal of ESSCO Make For Gents Toilet

with 15mm Push & stop tap of approved brand including connection the

urinal with rigid pvc nozzle & pvc connection pipes & bottle trap in trap

etc. complete as directed by engineer in charge (A) Crystal White flat

back or corner type size 590 mm X 375 mm X 390 mm, etc. with all

116 material & labours to complete this job in all respected manners, etc. Each. 45.00 1,036.27

complete as per detailed & approved by the consultant & directed by EIC.

Providing & Fixing 600mm x 450mm beveled edge mirror of superior

glass mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to

wooden plugs with C.P. brass screws & washers, etc. with all material &

117 labours to complete this job in all respected manners, etc. complete as Each. 95.00 833.73

per detailed & approved by the consultant & directed by EIC

Providing & Fixing handicap toilet set with Wall-mounted European

Closet & wash basin & all handicap requirement with dual flush tank,

seat & lead (heavy duty) including C.I. Brackets, C.P. brass hinges, M.S. /

C.I. painted brackets, Waste Coupling, 32mm size bottle trap etc. all

Internal fittings complete with grab rails etc. rubber buffers, C.P nuts,

bolts etc making holes in walls & floors, & finishing for ready to use.

The rate includes all necessary connection charges as per product detail

to the satisfaction of Architect / engr. in-charge where required & the

final handing over etc. complete as per specifications, drawings & as

directed by the Engineer-in-charge. The scope includes following items:

EWC with seat cover & dual flush tank & WASH BASIN SET: - CERA

'CRUSE SET' as approved by Architect / consultant & Directed by EIC.

Providing & Fixing pillar tap, screw down high pressure with screws,

119 shanks & back nuts. (i) 15mm dia. Each. 95.00 308.73

Architect: ARG Creation PVt. LTD. 15 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing erecting and fixing double coated ISI water tank of required

120 capacity each with all necessary fittings and connection etc. complete on Ltr. 25000.00 3.95

Drilling 200/215mm dia bore in over burden rocky or loose collapsible/

bolder strata including lowering and fixing of 175mm nominal dia UPVC

121 Pipes up to required depth and further drilling of 165 mm dia bore hole Mts. 300.00 467.63

in rocky strata by DTH Rig including fitting of bore plug.

Lowering of Submersible pump set complete with required nos and size

of Column pipe ( GI / HDPE pipe) erected by means of proper chain

pulley block & pipe wrenches after checking of threads of each pipe with

122 coupling to take the load of the pump set and pipe assembly filled up Job 1.00 2,932.79

with water with trail testing, wiring GEB test report.

Single phase submersible pump motor set with control panel. (c) Motor

rating 2 HP (17 stage) pump having capacity of 106 LPM at 40 mtr head

123 suitable for 32 mm dia. delivery pipe, Cat Q- II Set 1.00 21,694.80

124 Flat PVC cable size 4.0 sq.mm Mts. 300.00 85.85

125 HDPE pipe - 40 mm dia. Mts. 300.00 126.25

Providing and fixing in position U.P.V.C. cowl Vent to pipes. (C) 100mm

Providing & Fixing of single lever exposed shower mixer with provision

for connection to exposed shower pipe & hand shower with connecting

127 legs & wall flange as per approved size & make list complete as per Each. 50.00 6,562.48

detail & the instruction of EIC.

Providing & Fixing of hand shower 105mm round shape single flow with

air effect (ABS body & face plate chrome plated) with rubit cleaning

128 system as per approved size & make list complete as per detail & the Each. 20.00 3,194.13

instruction of EIC.

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing

drain pipe etc. and repairing the hole after insertion of drain pipe etc.

129 with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone Each. 50.00 1,212.00

aggregate 20 mm nominal size), including finishing complete so as to

make it leak proof

Providing & Fixing C.P. brass towel rail Approved Make complete with

C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws,, etc.

complete as per detailed, directed & approved by the consultant / EIC.

(B) 600mm x 20 mm size, etc. with all material & labours to complete

this job in all respected manners, etc. complete as per detailed &

approved by the consultant & directed by EIC.

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets,

131 painted white including cutting holes in walls and making good the Each. 4.00 2,280.27

same but excluding fittings.

Stone work ashlar sunk or moulded or sunk and moulded upto floor five

level in cement mortar 1 :6 (1 cement : 6 coarse sand) including

pointing with white cement mortar 1 :2 (1 white cement : 2 stone dust)

132 with an admixture of pigment matching the stone shade : Marble Stone Smt 40.00 109,772.86

Providing & fixing marble Inlay & Art work in flooring/ ceiling / wall

surface by cutting cavities in base marble slab as per approved design

and inserting different color marble/ stones including cutting, shapping,

133 edge finishing and fixing with suitable adhesive, fillig joints, grinding, Smt 100.00 32,602.80

mirror polishing, as per detailed & approved by theconsultant & directed

Providing wood work in frames of false ceiling, partitions etc. sawn and

134 fixed in position with Carving inlay work; Sal wood Cmt 25.00 105,801.89

Architect: ARG Creation PVt. LTD. 16 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Laminate Finish Partition

Providing & fixing laminate finish partition up to false ceiling ht

(thickness of partition is 82 mm or as specified in drawing) having

mm thick marina plywood IS 710 grade both side on aluminum framing

of gauge 16. Aluminum framing size for vertical & horizontal support is

50 mm x 25 mm. Grid of aluminum framing is 600 mm x 600 mm.

All exposed surfaces finished with 1 mm thick Laminate of approved

shade complete with mat finish. Necessary framing to be erected above

false ceiling. No extra cost to be paid for the same. Before installation,

make hole/face plate for conduit pipes of electrical / networking cables

with open able stud from partition Including all materials and labor etc.

Make necessary grooves as per shown in drawing and filling it with

epoxy of matchin shade. Using of 12 mm thick clear glass with proper

crystal edges & with suggested frosted films on glass. All joints are

covered with teakwood beading Patti finished with polish matching with

laminate. Including door of same design if required Complete with all

necessary hardware & adhesives as per details given in drawing and as

per instructions of Architect/consultant/Engineer In charge. Contractor

has to provide all necessary cut outs (race ways.) for Electrical works &

no extra payment shall be made for it. All ply should follow IS

Laminate Finish panelling

Providing and fixing 12 mm & 9 mm thick marine ply as per IS

fixed on frame work finish with 1 mm thick Laminate finished paneling

based on aluminum frame having 16 gauge as per require size are

placed at 600 x 600 mm c/c grid both ways supported on top & bottom

or fixed on wall/existing partition with suitable aluminum angles and

astends with steel screws & ADHESIVES. Covered with 1 mm thick

suggested shed LAminate complete. The frame work shall be made

from square hollow aluminum section of approved make conforming to

IS specification of size 38 X38 X 1.6 mm vertically and horizontally.

The framework shall be fixed as per drawing vertically @ 600 mm c/c &

horizontal 600 mm c/horizontally and first member shall be fixed at gr.

level. In paneling frame work (intermediate, perimeter ) & (at vertical or

horizontal joint of ply & at turning point ) shall be fixed to the

wall/floor & ceiling with Sheet metal screws/Nylon grip screws of Coro-

shield /Fischer and shall be supported by filling required size wedges

/washers/ MS wall connectors or packing of teak wood /MS washers

to ensure right angles and plumb level. All ply/wooden frameworks

136 shall be treated with anti-termite treatment & hidden The framework Sqm 125.00 4,694.62

shall be covered with approved make plywood (as per IS 710:2010 and

IS 5509:2000),adhesive ,tape, headless nails etc ,finished with laminate

in pattern as shown in the drawing having suggested grooves as per

drawing. Rate shall be inclusive of grooves etc complete as per drawing

or as directed by ENGINEER IN CHARGE/ Architect/consultant.

Measurements for paneling work to be recorded up to finished false

ceiling level only irrespective of aluminum frame work, which shall be

provided from gr. level to RCC slab / beams soffit level. Rates shall also

be inclusive of cost of making cut outs/ openings for electrical

fixtures, tube lights /air-conditioners ,grills, diffusers etc and no

extra payment shall be considered for additional sections provided. All

curved surfaces, recesses, waffles shall be part of the paneling including

open able shutter wherever required area and finished with the same

material. Rate shall be inclusive of all item which are part of paneling

Only the clear elevation area of finished plywood wall paneling with

laminate shall be measured and paid. Sample mock shall be approved

from Architect/Department.. Complete as per given detail drawings

(suggested as per given nieces,given patterns of grooves etc .All square

grooves are finish Provision of indirect lights gape of 2 to 3"All

Architect: ARG Creation PVt. LTD. 17 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing eco-friendly light weight calcium silicate false

ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the

Tile Periphery for Extra Strength The Light weight calcium silicate ceiling

tiles shall have , light reflection 85% noncombustible as per B.S.

part IV, 100% humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best thermal Insulation . The Light

weight calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of

0.75 NRC or equivalent of size 595 X 595 mm to be laid on true

horizontal level suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per sqm at joints to

get required length and size of 24X38mm made from 0.30 mm thick

(minimum) sheet, 1200mm centre to centre, and centre to centre to

137 form agrid of 1200X600mm and secondary thick (Minimum) sheet to be Sqm 254.00 1,674.15

interlocked at middle of the 1200X600mm panel to form grid of size

600X600mm resting on periphery walls/partitions on a perimeter wall

angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick

(minimum) sheet with the help of rawl plugs at 450mm centre to centre

with 25mm long dry wall screws @ 230mm interval and laying 15mm

thick Densified edges light weight calcium silicate ceiling tiles of

approved texture (Fine Fissured/Cosmos/Spintone) in the grid

Pro. And fixing single layer water proof gypsum board 12.5 mm thick

sections using water proof board of size 1220 mm x 1830 mm x

mm suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm

center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at

457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm

138 x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor Sqm 281.00 606.95

fastener, scoch bolt connecting cleat,joining compound top coat on

ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as

per detail drawing as directed

Laminate finish plyboard ceiling

The works include providing & fixing of Ply Board Ceiling which

Incorporates a fully concealed Aluminum grid. Complete with all

necessary hardware, fittings and accessories. Finish with suggested

laminates. The job also includes providing access panels, cutting of

spot lights, luminaries, speaker, etc. Sheets in size 8’ x 4' Laminates

mm in thickness of pattern shown as per drawings.. ½” (or 3/8”)

screwed on steel stud system. The steel stud frame consisting of main

furring Alum channel at every 600 mm and cross channel at every

mm. Both main and cross channels are attached though jaw clip. Screws

will be corrosion proof either Chromised or Cynated. Screw fixing is

139 done mechanically with drilling machine & suitable attachment. The Sqm 30.00 4,399.65

gaps will be initially filled with jointing compound and then taped by

self adhesive covered with proper jointing compound..Contractor has to

provide all necessary cut outs for Electrical works & no extra payment

shall be made for it. Complete as per details given in drawing and as

per instructions of Architect/consultant/Engineer In charge. All ply

should follow IS

Architect: ARG Creation PVt. LTD. 18 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & fixing work station / table having ht of 750 mm Top, with

Wooden Structure of Frame as per Architect/ Engineer Design or

Selection and Back and side Ply of table is also made up of 19mm Thick.

Top of Table is 19mm thk ply with laminate Finish Per Requirement and

All internal & external Joints finished with teakwood beading Patti.

Common or front Part of. All exposed and internal surfaces covered with

Laminate Finish of approved shade & Complete as per detail drawings &

140 as instructed by Architect/consultant/ Engineer In charge. Complete Sqm 44.00 27,130.54

with all necessary hardware like nails, ss screws, table chain, Key board

trey, TDS channel, adhesives etc. Contractor has to provide all necessary

cut outs for Electrical works & no extra payment shall be made for it. All

ply should follow IS

Storage with Shutter (Laminate FINISH)

Providing & fixing Any Height storage having Any size of having depth

of 350mm/450mm/600 mm, having skirting of 75 mm, with proper

locks. includinf of vertical supports & horizontal shelves shown as per

drawing made by 19 mm thick Marin ply, having shutters of 19 mm

thick ply or Clear Glass with using 12 mm thick Marin ply for framing.

All complete with proper teakwood beading. and Teakwood molding as

per design. Back ply is 12 mm Marin ply. All exposed are covered with

mm thick Laminate & internal surfaces are covered with 1 mm thick

laminate. External & internal joints covered with beading Patti complete

141 with Polish finish. With grooves shown as per drawing All complete with Sqm 96.00 13,815.77

proper hardware like locks, S.S. Screws, MS Nails, Magnets, table chains,

cable manager SS 304 Handles of 250 mm and 100 mm dia etc. All

Details as per shown in detail drawings & as per instructions of

architect/consultant / in charge engineer. All ply should follow IS

Supplying and providing DINING chairs with arms with Seat and back

upholstered with soft PVC with Stackable SS 202 frame with mirror

finish. Overall dimension 743 L x 617 W x 786.5 H (Or as specified)

142 complete as directed by architect and product as per given specification. Nos 142.00 4,040.00

Complete as per architectural design and concept and approved by

Architect & Client.

Supplying and providing dust bin made of 100% virgin plastic with

143 paddle. Capacity-10 to 15 Ltr. Nos 40.00 557.52

Blinds : Providing and fixing as per approved make manual roller blinds

with Soltis fabric & spring drive system with steel ball chain/one touch

with speed control action roller blind with end brackets with head ail,

components, bottom bar.Color-Alu with manual operation and

warranty etc as per manufacturer’s specifications. Fabric to be as per

approved sample. All the work complete as per the detailed drawing and

instruction of Architect/EIC. Soltis-99-Color-Alu fabric: 39%

Polyester/61% PVC with Aluminum Backing. Weight:290 g/sqm,

Thickness:0.32 mm, Openness Factor:3%, Visible Light Transmission (N-

N): 2%-4%, Solar reflection (white) 65%, Internal Solar Factor (gtot):

- 0.48, Tensile Strength (Warp/Weft):160/170daN/5cm,Tearing

144 Strength(Warp/Weft):11/13daN, Fungi static Treatment: Degree 0, Sqm 48.00 1,962.94

Excellent (EN ISO 846-A) Fire Retardancy:B-s2,d0/EN 13501-1. All

complete as per approval of designer & instruction of Project Manager.

(The mode of Measurement: The size of the blind will be measured from

end to end bracket (Left to Right bracket) & height will be measured

from top of the pelmet till the bottom of the bottom bar

Architect: ARG Creation PVt. LTD. 19 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Waiting Sofa (One Seater) : @ 900(L) x 870 mm (B) x 800 mm (H)

comprising up of Solid teak wood with PU semi gloss finished polish.

The seat shall 150 mm th 40 density & back shall be 32 density foam

& finished in Approved fabric upholstery as per the drawing/image and

instruction from Architect/EIC all external & internal exposed woodwork

to be finished in PU semi gloss finish polish. .The work shall be done as

per drawing , specifications, sample approved and as directed by the

Architect and Engineer-in-charge. The rate shall be for complete item

inclusive of all material, labour, wastages, necessary tools & tackles,

145 approved make for all floors, all heights, all levels and all places within Nos 7.00 16,551.38

campus. Contractor shall do all the needful and shall fulfill Architect's

design intent. No additional claims will be entertained for this. Rate

shall inclusive of providing mockup sample for approval of architect.

Basic rate of fabric 800/ Rmt

Waiting Sofa (Two Seater) : @ 1500(L) x 870 mm (B) x 800 mm (H)

146 specification for complete work . Nos 8.00 27,585.63

Waiting Sofa (Three Seater): 2100mm (L) x 870 mm (B) x 800 mm (H)

147 specification for complete work . Nos 53.00 35,861.31

Center Table:750 x 750x 450 mm

Providing fixing center Table comprisig from 303 BWR ply framing with

laminate finish matching with other furniture with 12mm thick top

including rubber buffers and wooden legs at the bottom of table,

including all type of hardware, fittings, fixtures , tools , tackles , etc

148 complete as per detailed drawing. The work shall be done as per the Nos 6.00 12,871.59

specifications, sample approved and as directed by the Architect and

Engineer-in-charge.

Side Table:450 x 450x 450 mm

Providing fixing center Table comprisig from 303 BWR ply framing with

laminate finish matching with other furniture with 12mm thick top

including rubber buffers and wooden legs at the bottom of table,

including all type of hardware, fittings, fixtures , tools , tackles , etc

149 complete as per detailed drawing. The work shall be done as per the Nos 32.00 9,609.95

specifications, sample approved and as directed by the Architect and

Engineer-in-charge.

150 Providing and fixing Bunk beds Nos 90.00 15,150.00

Providing, and placing in position double bed with mattreess, pillow,

bedsheet and blanket with cover in Rooms, made from teak wood of

over all size size 1500 mm x 1700 mm Total height with mattress

mm ( mattress thickness shall be 150mm ) it shall consist of deginer

legs made out of 100mm x 100mm section . the framing shall be

mm x 40 mm all around and two cross members in transverse

direction . the top shall be commercial ply wood 18 mm thich the head

board shall be from floor to 450 mm above mattress top the framming

of head board shall be 50 mm x 40 mm and 12 mm ply panneling the

facia of bed ahall be cladded 35 mm thick P.U. foam and upholstry of

approved fabric shall be provided all around and secured to the frame

work ( tapestry basic rate Rs. 600.00 per Mt. )necessary vent holes shall

be made below matress The mattress shall be 150 mm thick of high

density sleep well or equavalent. including side unit on both sides, all

exposed teak and ply shall be melamine polished in wallnut finish All

the work shall be carried out as per design & direction of architect.

Architect: ARG Creation PVt. LTD. 20 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing, and placing in position double bed with mattreess, pillow,

bedsheet and blanket with cover in Rooms, made from teak wood of

over all size size 1950 mm x 2100 mm Total height with mattress

mm ( mattress thickness shall be 150mm ) it shall consist of deginer

legs made out of 100mm x 100mm section . the framing shall be

mm x 40 mm all around and two cross members in transverse

direction . the top shall be commercial ply wood 18 mm thich the head

board shall be from floor to 450 mm above mattress top the framming

of head board shall be 50 mm x 40 mm and 12 mm ply panneling the

facia of bed ahall be cladded 35 mm thick P.U. foam and upholstry of

approved fabric shall be provided all around and secured to the frame

work ( tapestry basic rate Rs. 600.00 per Mt. )necessary vent holes shall

be made below matress The mattress shall be 150 mm thick of high

density sleep well or equavalent. including side unit on both sides, all

exposed teak and ply shall be melamine polished in wallnut finish All

the work shall be carried out as per design & direction of architect.

Providing and supplying Luggage Rack : 2'-0" x 4'-0" x 2'-0" ht. made

from special Ghana teak wood framing size 75 mm x 40 mm and

mm th commercial ply. It shall have four designer legs made from

Special Ghana teak 75 mm x 75 mm section The top shall be made from

50 mm x 35 mm thick battens of same material and quality &

153 imported veneers on all exposed surface melamine (wallnut ) . Nos 5.00 12,554.30

polishing on it & shoe space at skirting level. etc. complete. As per

direction of Architect.

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in/ on surface on wall/ceiling complete with 6A Modular type

switch / bell push & accessories and earth continuity of following type,

erected on PVC / Metallic box, single mounting base frame covered

154 with textured/metallic front plate modules erected on / in wall / ceiling Pt 244.00 449.45

as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.,__ (a) with medium class Rigid PVC pipe and

accessories Cat- III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected concealed in / flushed on wall/ceiling, complete with earth

continuity and necessary connection with primary light with accessories

erected on Metal / PVC box covered with 3 mm thick PC(Polycarbonet)

155 / Acrylic sheet for open / concealed wiring. with necessary Lamp holder Pt 500.00 132.31

/ ceiling rose / H.D.Connector as directed. Note:- Maximum up to

mtrs length, excess will be considered as Mains for Secondary Point (a)

with medium class Rigid PVC pipe and accessories

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of pipe

to be erected concealed in / flushed on wall / ceiling complete with 6A

Tissino Type ISI marked accessories with earth continuity erected on

156 Metal/PVC box covered with 3 mm thick PC(Polycarbonet) / Acrylic Pt 55.00 375.72

sheet. with necessary Lamp holder/ ceiling rose/ H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and accessories

Architect: ARG Creation PVt. LTD. 21 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan regulator

with separately mounted and accessories with earth continuity of

157 following type erected on PVC / Metallic box, single mounting base Pt 91.00 638.32

frame covered with textured/metallic front plate modules erected on /

in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed .(a) with medium class Rigid PVC pipe and

accessories. Cat. III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on

surface of wall / ceiling complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic box covered with appropriate front plate

158 modules erected on / in wall / ceiling as per pipe erected with following Pt 244.00 475.71

type of accessories. ,__ [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire, (a)

with medium class Rigid PVC pipe and accessories Cat. III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic box, single mounting base frame covered with

159 textured / metallic front plate modules erected on / in wall / ceiling Pt 125.00 257.55

with following type accessories Cat. III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on

surface of wall / ceiling complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic box covered with appropriate front plate

160 modules erected on / in wall / ceiling as per pipe erected with following Pt 84.00 711.04

type of accessories.,__ [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire, (a)

with medium class Rigid PVC pipe and accessories Cat. III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on

surface of wall / ceiling complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic box covered with appropriate front plate

161 modules erected on / in wall / ceiling as per pipe erected with following Pt 70.00 817.09

type of accessories.,__ [III] For 16A Plug with 2-4 sq.mm Cu. Wire. (a)

with medium class Rigid PVC pipe and accessories Cat. III

Providing following type of Modular Type Accessories mounted with pvc

/ metallic box, single mounting base frame covered with textured /

162 metallic front plate , modules erected with necessary connection. As Ea. 60.00 25.25

desired by Engineer In charge.__ (7) Blank Plate Single Cat.III

Providing following type of Modular Type Accessories mounted with pvc

/ metallic box, single mounting base frame covered with textured /

163 metallic front plate , modules erected with necessary connection. As Ea. 40.00 160.59

desired by Engineer In charge,__ (3) Two Pin/RJ-11 Telephone Socket__

[A] For One Gang

Providing following type of Modular Type Accessories mounted with pvc

/ metallic box, single mounting base frame covered with textured /

metallic front plate , modules erected with necessary connection. As

164 desired by Engineer In charge,__ (4) TV Co-axial Socket outlet cat.III Ea. 16.00 160.59

Architect: ARG Creation PVt. LTD. 22 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing following type of Modular Type Accessories mounted with pvc

/ metallic box, single mounting base frame covered with textured /

metallic front plate , modules erected with necessary connection. As

165 desired by Engineer In charge,__ (5) Electronic hum Free four or more Ea. 91.00 398.95

steps EME Fan regulator cat.III

Providing following type of Modular Type Accessories mounted with pvc

/ metallic box, single mounting base frame covered with textured /

166 metallic front plate , modules erected with necessary connection. As Ea. 3.00 360.57

desired by Engineer In charge,__ (16) 32 Amp. DP Main Switch Operating

with Energy Key Tag Cat.III

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

167 insulated stranded wire of green colour for earth continuity of following Mtr. 2800.00 82.82

size __ (a) with medium class Rigid PVC pipe and accessories,__ (b)

wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

168 wire of green colour for earth continuity of following size,__ (a) with Mtr. 1550.00 112.11

medium class Rigid PVC pipe and accessories,__ (a) 2 wire 4 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

169 wire of green colour for earth continuity of following size__ (a) with Mtr. 1550.00 147.46

medium class Rigid PVC pipe and accessories,__ (b) 2 wire 6 sq. mm

Supplying & erecting Delton or approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two pairs, &

wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming to C-DOT erected in

existing pipe. of following size of conductors & nos.of pairs. With

necessary connections.__ [A] Conductor Size 0.5 mm__ (a)

Unarmoured,__ 2) Two Pairs

Providing & erecting main Distribution (MDF) indoor type, back mounted

171 frame.(b) Suitable for 20 pair Ea. 4.00 1,368.55

Supplying & erecting M.S. Box having 16 Gauge painted with red oxide

or Heavy duty PVC box erected flushed on wall or concealed in wall with

172 necessary plastering & finishing as directed of following size.(c) 200 Ea. 4.00 88.88

Supplying & erecting approved make LAN cable of following size in

173 existing pipe as per direction [D] CAT - 6 e Mtr. 1150.00 76.76

Providing & Erecting approved make following size of TV Co-axial

flexible cable comprising inner conductor of solid bare copper insulated

174 with Foam PE & Secondary conductor made of poly - Aluminium film Mtr. 650.00 62.62

bonded Al. Braids @ suitable coverage overall sheathed with black PVC

insulation.__ e).RG-11

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.

175 Pipe down rod erected duly painted for fan complete with necessary 24/ Mtr. 91.00 108.07

O.20, 3 core flexible wire with earthing.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

176 necessary PVC fittings & Junction boxes fixed with adhesive solution & Mtr 2200.00 33.33

Clamps with following dia of pipes, in approved manner as directed (b)

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

177 necessary PVC fittings & Junction boxes fixed with adhesive solution & Mtr 650.00 54.54

Clamps with following dia of pipes, in approved manner as directed (c)

Architect: ARG Creation PVt. LTD. 23 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

178 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Ea 168.00 112.11

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity & confirms to

179 IS : 8828 in existing box having following capacity (A) 6 to 32 Amp. Ea 26.00 299.97

Sheets steel powder coated enclosure suitable for incorporating

180 One/Two nos. MCB. Ea 23.00 176.75

Plastic enclosure fitted with DIN rail suitable for incorporating Three

181 /Four nos. MCB Ea 5.00 108.07

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

182 existing box having following capacity (c)63 Amp.Cat.III Ea 11.00 737.30

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected as directed

(ii) 40Amps. DP Cat. III

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

184 same company of MCB to be used) suitable for (A) single phase Ea 8.00 702.96

incoming and horizontal single phase outgoing. (a) single door (IP-30)

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs should be used of

185 same company of MCB to be used) suitable for (B) three phase incoming Ea 7.00 2,445.21

and single phase horizontal type outgoing Per phase isolation type (PPI)

The Above all items of MCB, DB the cost of erection on New angle iron

186 frame add following. [B] above single phase 8 way and all three phase Ea 7.00 248.46

The Above all items of MCB, DB the cost of erection on New angle iron

187 frame add following. [A] up to 8 way single phase Ea 8.00 163.62

Providing & erecting Medium Voltage Danger Notice Board sticker of

188 standard size Ea 10.00 26.26

Supplying & erecting Single line BEETEL / BPL / SONY/ Panasonic or

189 equivalent make push button type Cord Less telephone instrument. Ea. 40.00 2,482.58

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.

Architect: ARG Creation PVt. LTD. 24 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value of

earth resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane mentioned

in test Certificate) & having back filling compound of (B) Inner chemical

191 (CCM Compound)-Resistivity:- 0.2 ohm / meter testing as per IEC Ea. 6.00 5,760.03

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should be

capable to retain moisture for long time Necessary test report must be

submitted by Agency. (b)For Electrical installation up to 11 KV in normal

Length of Pipe : 2.00 mtrs Back filling Compound :1 no. Bag of 25 Kg

Providing and erecting required size HOT deep Galvanised iron strip for

192 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. Kg. 50.00 77.77

using proper clamp.

Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated conforms to IS

193 IEC - 227 erected in existing pipe of following size with required size of Mtr. 150.00 56.56

copper lugs, nuts and bolts if required.__(e) One wire 6.00 sq. mm

Providing one bag of 25 Kg. Additional Back Filling Compound (BFC)

194 suitable for safe earthing device. Ea. 6.00 707.00

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in

195 RCC slab with Making the site as original. Ea. 95.00 43.43

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded

to the RCC bars up to 50mm length each side and pierced through a

196 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ea. 95.00 108.07

Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or

Providing & erecting Approved make Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C.50 Hz. 1200 mm sweep

198 complete having 4 blades Aluminium body and blade sets having Ea. 95.00 2,358.35

ornamental design shanks, canopy erected with earthing [ Make shall

be approved by Engineer in Charge]

Supplying & erecting approved make low noise decorative exhaust fan

199 having square frame ABS body with inbuilt lowers & square frame. Ea. 35.00 1,366.53

250mm with 1350 RPM Cat.II

200 Providing suitable M.S. louver shutter of the Exhaust fan. Ea. 35.00 368.65

Architect: ARG Creation PVt. LTD. 25 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

13/CRCA/ aluminium die cast powder coated and high U.V. & corrosion

resistance with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED

driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of Wattage capacity of ED

fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.) (A)Tube Light with integral driver (iv) 22-24 Watts,

Surge - 2KV,IP-20, conventional 4 feet, CAT III

Supplying and erecting led lamps with following wattage capacity of

to 240 voltage, minimum 15000 burning hours life, 500 V in built-

surge protection,Polycarbonate diffuser, mounting suitable for E14 /

202 E27 / B22 lamp holders, pf >= 0.5 (A)LED Lamps integral type, with PC Ea. 95.00 404.00

diffuser suitable LAMP holder, (v) 21 to 30 watts, CAT III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than 0.95,

THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 &

203 LM-80 Certificates)(NOTE: Below description have shown ranges of Ea. 240.00 758.51

Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20 (iv) 22-24 watts, Surge-2 KV CAT

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than 0.95,

THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 &

204 LM-80 Certificates)(NOTE: Below description have shown ranges of Ea. 120.00 427.23

Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20 (ii) 11-15 watts, Surge-2 KV CAT

Architect: ARG Creation PVt. LTD. 26 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than 0.95,

THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 &

205 LM-80 Certificates)(NOTE: Below description have shown ranges of Ea. 125.00 724.17

Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (B) LED Panel Light with

provision for Plane front frame with translucent cover fixed to housing

complete.IP20 (v) 24 watts, 12" x 12" , Surge-2 KV CAT III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than 0.95,

THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 &

206 LM-80 Certificates)(NOTE: Below description have shown ranges of Ea. 125.00 1,794.77

Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (B) LED Panel Light with

provision for Plane front frame with translucent cover fixed to housing

complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV CAT III

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA

polyester powder coated and high U.V. & corrosion resistance with

diffuser and/or Polycarbonate optics with company mark/name__120 to

300 V,Power Factor more than 0.9, THD < 10 %,__CCT 4000 K to

6500K, Uniformity ratio >0.7,

Luminaire efficiency> 85 lumens/watt ,__LED driver efficiency >

85%__CREE/OSRAM/PHILIPS/Lumileds/NICHIA/SEOUL/Bridgelux(U.S.A.)

make LED used for luminaire. (Each fitting required LM-79 & LM-80

Certificates)__(F) Spot Light 425 Lumens, Surge-2KV (ii) 8 to 11 Watts

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA

polyester powder coated and high U.V. & corrosion resistance with

diffuser and/or Polycarbonate optics with company mark/name__120 to

300 V,Power Factor more than 0.9, THD < 10 %,__CCT 4000 K to

6500K, Uniformity ratio >0.7,

Luminaire efficiency> 85 lumens/watt ,__LED driver efficiency >

208 85%__CREE/OSRAM/PHILIPS/Lumileds/NICHIA/SEOUL/Bridgelux(U.S.A.) Mtr. 500.00 220.18

make LED used for luminaire. (Each fitting required LM-79 & LM-80

Certificates)__(D) LED Strip Light (ii) Minimum 7.2W -240 LED per

meter,(2 wire, IP-65) with non integral suitable Driver complete Cat-lll

Architect: ARG Creation PVt. LTD. 27 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than 0.95,

THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

209 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & Ea. 50.00 312.09

LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (H) Mirror Light 9 Watts,

wall mounted minimum 1 feet long.

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

210 certificates)(NOTE: Below description have shown ranges of Wattage Ea. 60.00 5,194.43

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (B) Flood Light (IP-65), Surge

protection -4KV integral and, Light must have 440VAC line supply with

over-voltage protection. (i) above 40 to 48 watts Cat-lll

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt .

LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

211 certificates)(NOTE: Below description have shown ranges of Wattage Ea. 75.00 5,976.17

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply with

over-voltage protection. (iii) Above 60 to 90 watts Cat-lll

Architect: ARG Creation PVt. LTD. 28 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply of approved make frp/grp pole having followiing specifications :

FRP/GRP pole made by centrifugal moulding process using thermoset

resin polyester/epoxy resin system having minimum glass content

45.0%. The pole should be in one pieceand tapered round in

shape,having smooth outside surface finish and should be totally fre

from corrosion as well as non conductive and shock proof. Pole Should

be provided with FRP/GRP base bracket dully fabricated from metal(M.S)

and dully claded with FRP/GRP material to avoid any metal exposer and

painted with PU paint. Pole should mechanical properties i.e 1. Specfic

gravity (ASTM D 792) 1.3‐1.8 Kg/m3, 2. Glass Content % by weight

(ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption (ASTM D 570) <0.5%,

4. Tensile Strength(ASTM D 638) 200+/‐50Mpa, 5. Flexural strength

(ASTM D 790) 250+/‐50Mpa, 6. Compressive Strength (ASTM D 695)

200+/‐50MPa, 7. Yeild Strength(ASTM D638) 250 +/‐50MPa. as per the

standard ANSI C123.20 latest version of ASTM D 923/01 Including cable

termination box with necessory accessories.The size of pole and type of

installation with foundation , Anchor Base & Internal junction box as per

the manufacturer details and site requirement .

Pole should be flame retardant as per IS 6746. Resin used shall be UV

resistance and pigmented. Pole should be painted With first coat of

epoxy primer and then two coat of highly weather resistance

polyurethen paint to ensure proper addhesion of the paint.Minimum

thickness shall be 80 to 100 micron.Defelection of the pole shall not

exceed more than 10.0 % of the length of the pole for the given

load.Pole should be generally made as per the dimensional

data,performance criteria and some interchagebility features of poles as

per the standard ANSI C123.20 latest version of ASTM D 923/01

Including cable termination box with necessory accessories.The size of

pole and type of installation with foundation , Anchor Base & Internal

junction box as per the manufacturer details and site requirement . (1)

'A' class frp/grp pole suitable for base plate mounting. [G] Overall

Length of 9.0 meter, Average thickness : 7mm, Top/Bottom Ouside Dia.

76/228mm +/‐2.Weight of Pole 40.0 Kg approx. (Without base) Metal

Anchor Base dully frp claded (Size : 405 Ø * 18mmthk , Mounting hole

PCD 350mm * 6 nos. of 20 Ø hole)

Architect: ARG Creation PVt. LTD. 29 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply of approved make FRP Pole having following specifications: FRP

Light Pole made by CNC filament winding machine using thermoset

resin polyester/epoxy resin system) having minimum 62% glass content.

The pole should be in one piece and tapered round in shape, having

smooth finish and should be totally free from corrosion as well as non

conductive & shock proof Pole should be provided with FRP Anchor

Base and it should be heavy duty, or MS Material duly painted with

Epoxy paint. Pole should be flame retardant as per IS 6746. Resin used

shall be UV resistance and pigmented. A highly weather resistant

polyurethane coating shall be applied to the pole after applying suitable

primer system that ensures proper adhesion of the paint. Minimum

coating thickness shall be 80 to 100 micron. Deflection of the pole shall

not exceed more than 10% of the length of pole for the given load“ Pole

should be generally made as per the dimensional data, performance

213 criteria and some interchangeability features of poles as per standard Ea 75.00 7,482.08

ANSI C 136.20 latest version or ASTM D 4923/01 including cable

termination box with necessary accessories . The size of pole and type

of installation with foundation as per manufacturer details and site

requirement are as below . (1) Suitable for base plate mounting single

arm Bracket. [A] Overall length of 2.5 Mtr, Average Thickness: 7mm.

Top/ Bottom OD Dia A/F 89/124 mm ± 2mm. Weight of Pole 10Kg

approx. (Without Base) Anchor Base (Size 250X250 & 12mm Th.)

Providing & erecting approved make street light / wall mounting

junction box compression moulded from DMC (thermoset plastic)

vertical sliding cover having locking with square head stud loop in /

loop out in built terminal suitable for four core cable, waterproof of I.P.

54 protected with clamp or bolt nut & earth bolt of following size. [B]

Supplying following size of Light duty “A” Class G.I . Pipe & erecting as

215 directed by Engineer-in-charge.__(B) 50 mm dia Mtr. 70.00 300.98

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

216 necessary clamps or in existing trench / pipe of following size of Mtr 650.00 153.52

cables__(a) 4 core 16 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

217 necessary clamps or in existing trench / pipe of following size of cables Mtr 650.00 117.16

(a) 4 core 4 Sq. mm

Supplying & erecting XLPE(IS:7098) (I)-88 ISI unarmoured Aluminium

218 cable 1.1 KV.grade to be erected as directed of following size. (c) 3 core Mtr 240.00 79.79

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

219 necessary clamps or in existing trench / pipe of following size of cables Mtr 200.00 904.96

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth for laying of

220 cable. below ground / road surface for enclosing cable and back filling Mtr 350.00 73.73

the same to make ground as per original.__(B)63mm outer dia

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth for laying of

221 cable. below ground / road surface for enclosing cable and back filling Ea 250.00 95.95

the same to make ground as per original.__(C) 90 mm outer dia

Architect: ARG Creation PVt. LTD. 30 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

222 tails, insulating tape etc for following size of cables.__(d) 2 to 4 core 16 Ea 125.00 47.47

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

223 tails, insulating tape etc for following size of cables. (B) 2 to 4 core 6 Ea 15.00 38.38

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

224 tails, insulating tape etc for following size of cables.(G) 3 & 1/2 core Ea 15.00 238.36

Solderless crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

225 connected to switchgear terminals with brass/cadmium plated nut bolts Ea 35.00 6.06

in an approved manner.__(A) 1.5/ 2.5/4/6 Sq.mm

Solderless crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

226 connected to switchgear terminals with brass/cadmium plated nut bolts Ea 16.00 15.15

in an approved manner.__(C) 16 Sq.mm.

Solderless crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

227 connected to switchgear terminals with brass/cadmium plated nut bolts Ea 15.00 80.80

in an approved manner.__(I) 185 Sq.mm..

Providing & erecting weather proof, dust & vermin proof, floor mounted

front operated indoor type cubical panel board necessary IP-42 and

above protection as per approval from engineer incharge made from

SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling, welding,

riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch

gears, BUSBARS, suitable size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy duty end

228 terminal connection,danger notice board,necessary ventilation,earthing Sqmt 5.00 21,327.16

strip complete. The Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size. (C) The

standard companies switch gear shall be used and only manufacturers

as per IEC 61439 for beneficial use. (ii) with 550 mm. Depth

Providing and erecting busbar chamber confirming to IS-375 fabricated

from 16 G.M.S. sheet, dust & vermin proof having hinged door with

rubber gasket and necessary busbar supports with Aluminium busbar

having current density not more than 0.8 Amp. / sq.mm (Rated current

/ cross section area) duly wrapped with colour insulation tape for phase

229 sequence, three phase & neutral each Suitable for following current Rmt 2.00 5,140.90

capacity with necessary painting mounted on wall or pedestal frame of

required size with necessary connections., (C) Suitable for 300 Amp.

Architect: ARG Creation PVt. LTD. 31 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying & erecting approved make Digital time switch having lithium

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching. Programming

230 switches & housed in fire proof thermoplastic enclosure & transparent Ea 4.00 2,226.04

cover erected as required with necessary connection erected as directed.

Supplying & erecting power contactor for time switch complete erected

231 as per direction Cat III [D] 4 pole 440V 40 Amp. Rn.Mt 8.00 2,782.55

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

232 existing box having following capacity (a) 6 to 32 Amp. Cat III Rn.Mt 20.00 595.90

Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal current rating up to

200A.with variable Thermal & magnetic release suitable to work on

233 A.C.supply 50 c/s. with all internal connections & complete erected in Ea 1.00 16,221.61

existing 16 G.M.S.housing

ICS=100% of ICU only Cat III

Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The water

cooler should be comprising of hermetically sealed compressor, fan

234 motor, condensing unit, water tank surrounded by evaporating, coil, Ea 4.00 55,893.40

thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless Steel.

Supplying & erecting reverse osmosis (RO) water purification system

with M.S. powder coated pedestal frame, prefilter housing carbon filter

suitable buster DC pump, auto low & high pressure switches with

following size of LPH capacity & erected as directed [D] 100 LPH with

phase / 3 phase Raw water pump of 500LPH @ 2.5kg/cm2 - (1N0 -

Kirloskar /CRI/Lubi), Dual media filter 10"x54" - (1 No), Micron

235 cartridge filter 20" x 2.5" ( 1No), High pressure pump 500LPH @ Ea 4.00 77,891.20

10kg/cm2 - (1No - Shimge /CRI /Lubi), RO Membrane housing with RO

membrane of 40*40 - (1No), RO pressure tube 4" x 1E - ( 1No), 0 -

1200LPH Rotameter -(2 Nos), with Recovery Rate 50%.

8 / 10 Passengers, Ground plus 5 upper floor with Rated Speed of

236 / 1.5 m/sec., (C) With General PLUS ADDITIONAL SPECIAL FEATURES Ea 1.00 1,777,293.97

attached herewith. Prem. Cat.

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 60 x 60 x 150 cm. Deep in

below ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm)

237 high upper ground level with necessary curing and finishing in Ea. 7.00 1,652.36

approved manner. ( for 9 & 10 mtr pole)

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cms. below

ground across the road crossing or on floor with necessary material in

238 an approved manner and making the ground as per original. (F) 100 mm Mtr 450.00 206.04

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

required depth for laying any size of cable or locating the fault all over

239 the run and back filling the same and making the surface as normal Mtr 800.00 74.74

Covering of cable with second class bricks or cement tiles laid cover the

cable crosswise & also on both sides with covering of 7. 5 Cm. layer of

240 sand above & below cable (16 bricks per meter) Mtr 800.00 140.39

Architect: ARG Creation PVt. LTD. 32 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, Installation, Testing & Commissioning of following size of Grid

Tied Solar Power Plant with

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum

alloy Frame With Twin Wall Profile, Front Cover : High Transmission Low-

Iron Tempered Glass (AR Coated), High efficency and positive power

tolerance Pmax: 0/+5, Module Efficiency should be approx. 19.5%-22%,

Normal operating temperature 45'C, Junction Box with Waterproof IP67

& MC4 Compatible and Enclosed with Bypass diodes, 100%

Electroluminescence test to ensure error free Modules, Thep. temp. co-

efficient of the PV module shall equal or better than -0.45%/degree C.

Solar PV modules of minimum fill factor 75% to be used. Unit

Production:- More than 4.5 Unit /kw /day (Actual)(1Year Avg) With 10 95.00 40,658.56

year Product warranty and 25 year Linear Power Warranty includes all

mechanical and electrical parameters of the Solar panel. Modules must

be complied to the DCR(Domestic content requirements). The Ration of

AC to DC is 5:6 for the Installation capacity which are given in AC KW.

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency:

97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000,

O/p Power Factor: ~1, O/P THDi: <3%, Operating Tempreture Range: -

25~60°C, Integrated protection of Inverter are Anti-islanding Protection,

Input Reverse Polarity Protection, Insulation Resistor Detection, Ground

fault protection, Residual Current Monitoring Unit, Output Over Current

Protection, Output Short Circuit Protection, Output Over Voltage

Protection, PV array string fault Protection. Protection Degree: IP65, User

Interface LCD & APP, Datalogger & Communication: GPRS / Wi-Fi. (E)

Grid Tied Solar Power System: 51 - 100 kW (3 - phase)

Solar Panel: S.I.T.C of Poly Crystline/Mono Crystline PV Module (ALMM

approved) with 72 Cells - 150 Cells or More , Frame Material :

Anodized Aluminum alloy Frame With Twin Wall Profile, Front Cover :

High Transmission Low-Iron Tempered Glass (AR Coated), High

efficency and positive power tolerance Pmax: 0/+5, Module Efficiency

should be approx. 18%-21%, Normal operating temperature 45'C,

Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed with

Bypass diodes 100% Electroluminescence test to ensure error free

Modules, Thw temp. co-efficient of the PV module shall equal or better Per

242 than -0.45%/degree C. Solar PV modules of minimum fill factor 75% to 95.00 33.33

be used. Unit Production:- 4 to 5 Unit /kw /day (Actual)(1Year Avg) With

10 year Product warranty and 25 year Linear Power Warranty. (E)

Moudule o/p Range: 520 - 545 watt, Maximum Power Voltage Vmpp:

- 42 V, Maximum Power Current Impp: 12.5 - 13 A

Architect: ARG Creation PVt. LTD. 33 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

S.I.T.C of Solar Inverter Gried Tied: MPPT Range: 80-1000 V, Max

efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude

(m) ≤4000, O/p Power Factor: ~1, O/P THDi: <3%, Operating

Tempreture Range: -25~60°C, Anti-islanding Protection: Integrated,

Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated,

Output Over Current Protection Integrated, Output Short Circuit

Protection Integrated, Output Over Voltage Protection Integrated,

243 Protection Degree: IP65, User Interface LCD & APP,Datalogger & 900.00 8.08

Communication: GPRS / Wi-Fi (Optional) (H) Solar Inverter: 136 kW to Watt

200 kW: Max. input Current: 40 A, Max DC i/p Power: 176.5-260KW &

Nominal o/p Power: 136-200KW, Nomimal O/p Voltage: 540 V 3-Phase,

Nominal O/p Current: 144-145A,

Supplying and Erecting Seamless Box Pipe of suitable size for rooftop

solar installations with good stability agaist wind, Thickness 2 mm and

80 micron, Hot Dipped Galvanized steel coils. suitable arrangement for

base plate for foundation , solar panel mounting, the structure should

be suitable for carry the load of solar panel,wiring, sprinkler system etc.

with necessary foundation work/wall mount, j bolt, anchor fastner etc. Per

244 the nut bolt used for installtion of stucture should be (SS 304) quality. 1600.00 131.30

box. pipe ref. size (A) 40 x 40 x 2mm, (B) 50 × 50 × 2mm, (C.) 60 x

Supplying and Erecting 'C' Channel of suitable size for rooftop solar

installations with good stability agaist wind, Hot Dipped Galvanized

steel coils. It have suitable arrangement for base plate for foundation

Screw Arrangement , solar panel mounting, the structure should be

245 suitable for carry the load of solar panel,wiring, sprinkler system etc. 600.00 152.51

with necessary foundation work/wall mount, j bolt, anchor fastner etc. Kg

the nut bolt used for installtion of stucture should be (SS 304) quality.

Supplying and Erecting Stainless Steel Nut Bolt (SS 304) for Installation

of Solar PV Module, Structures, and other related items with required

246 size as engineer in charge demands for project Size, length upto 10 x Ea. 600.00 44.44

DC Cable: Electron beam cross linked compound,UV, Ozone,

Temperature & Hydrolysis resistant Flame Retardant, Low Smoke

Excellent Encapsulation

Very long / Service life >

Standards / Material Properties:

Fire performance : IEC 60332-1-2

Smoke emission : IEC 61034/ EN 50268-2

Halogen Free: EN 50267-2-1/-2, IEC 60754-2

247 Toxicity: EN 50305, ITC – Index <3 Mtr 250.00 76.76

Ozone Resistant : EN50396

Weathering UV: HD 605/A1 or DIN

Approvals : EN 50618; H1Z2Z2-k

with suitable sized of PVC pipe(ISI Mark) and Clamps,Shadels,Lugs. (A)

1 core 4 sqmm copper DC cable Colour Red

Architect: ARG Creation PVt. LTD. 34 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

DC Cable: Electron beam cross linked compound,UV, Ozone,

Temperature & Hydrolysis resistant Flame Retardant, Low Smoke

Excellent Encapsulation

Very long / Service life >

Standards / Material Properties:

Fire performance : IEC 60332-1-2

Smoke emission : IEC 61034/ EN 50268-2

Halogen Free: EN 50267-2-1/-2, IEC 60754-2

248 Toxicity: EN 50305, ITC – Index <3 Mtr 250.00 76.76

Ozone Resistant : EN50396

Weathering UV: HD 605/A1 or DIN

Approvals : EN 50618; H1Z2Z2-k

with suitable sized of PVC pipe(ISI Mark) and Clamps,Shadels,Lugs. (B)

core 4 sqmm copper DC cable Colour Black

S.I.T.C of Distribution board from AC Side , ACDB 3-Phase - 101 kW -

200 kW: AC1 DUTY CONTRACTOR‐300A

4P, 200A MCCB 4P (Cat III)WITH SPREADER & SHUNT, 3 PHASE SPD,

VOLTAGE MONITORING RELAY, ELR WITH CBCT, PHASE

249 INDICATING LAMP, POWER CABLE & OTHER ACCESSORIES. All Ea. 1.00 56,920.57

switchgears and connection are enclosed with IP66 Enclosure and

operate the position.

S.I.T.C of Distributiob System DC Side, DCDB - 80 kW - 300 kW

(18in:18out) : Input Mcb - 1000 V, 16 Amp,

250 1000 V DC SPD TYPE 2, TERMINAL/END,PLATE/END CLAMP: Ea. 1.00 32,954.28

4SQMM (KUT6) FOR OUTPUT, DC CABLE With suitable size of

interconnection.

Supplying & Errecting MC4 Connector Male - Female Set for Solar DC

251 Cable which is installed in Solar PV-module/Inverter/DCDB etc. Ea. 100.00 52.52

Providing & erecting Automatic solar panel cleaning system for solar

power projects which includes necessary plumbing work (UPVC pipes

and accessories) from source of water to project site (upto

meters),Suitable size of sub mercible/ open well motor, necessary

wiring for motor and sprinkler system with safety, timer circuit for

252 automatically on/off the sprinkler system, necessary size oand number Ea. 16.00 3,553.18

of nozzles/JET (minimum 1 Nozzle/Jet per module). (F) 101KW-200KW

Cleaning System

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied proper

insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco

253 Friendly green gas charging and 15A plug top & Remote Control & MS No. 9.00 101,166.65

Stand) with necessary core cutting. (1)For ISEER Range (KWH/KWH)(3.1

to 3.99) (D) for 2.2 to 2.5 ton capacity- Premium Cat.

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied proper

insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco

254 Friendly green gas charging and 15A plug top & Remote Control & MS No. 60.00 56,353.96

Stand) with necessary core cutting. (1)For ISEER Range (KWH/KWH)(3.1

to 3.99) (C) for 1.7 to 2 ton capacity - Premium Cat.

Architect: ARG Creation PVt. LTD. 35 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, installation, testing and commissioning of following minimum

capacity VRV High wall type Indoor unit equipped with washable

synthetic media pre-filter, fan section with noise level maximum 60 dB

@min 400 cfm /dynamically balanced blower, multispeed motor, coil

section with DX copper coil, electronic expansion valve, outer cabinet,

cord less remote control, drain pan, necessary accessories etc., suitable

for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete

255 as required. The unit shall have automatic force shut down provision in No. 69.00 20,695.91

case of fire on receiving signal from BMS System. The cooling capacity

of indoor unit will be at air inlet conditions of 27 Degree C DB and

Degree C WB temperature. (E) 2 TR

Supplying and erecting insulated pair of soft copper tubing open or

concealed including power and control cable,necessary PVC drain pipes

256 for Split AC machine up to 4 TR capacity Rmt. 642.00 965.56

Supply, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV system, complete

with fittings, with suitable adjustable ring type hanger supports,

jointing/brazing including accessories, insulated with XPLE Class-0

tubular insulation/with Class-0 closed cell elastometric nitrile rubber

257 tubular sleeves sections of specified thickness as given below for Rmt. 1000.00 370.67

Suction and Liquid lines, all accessories as per specifications etc with

necessary refrigerant joint as required : (B) 9.5 mm dia (OD) (Soft drawn)

with tube thickness 1.2 mm with 19 mm thick insulation

Supply, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV system, complete

with fittings, with suitable adjustable ring type hanger supports,

jointing/brazing including accessories, insulated with XPLE Class-0

tubular insulation/with Class-0 closed cell elastometric nitrile rubber

258 tubular sleeves sections of specified thickness as given below for Rmt. 1000.00 664.58

Suction and Liquid lines, all accessories as per specifications etc with

necessary refrigerant joint as required : (D) 15.86 mm dia (OD) (Soft

drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile

259 rubber insulation. (C.) 32mm dia. Rmt. 200.00 87.87

Supplying & installing MS standard type stand mounting for outdoor

260 unit of Split A.C. upto 4 TR capacity erected with necessary hardware No. 69.00 746.39

materials as directed.

Supplying, installation, testing and commissioning of electric driven

Main Fire Pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (a) Horizontal type,

multistage, centrifugal, split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical seal conforming to IS

1520. (b) Suitable HP Squirrel cage induction motor, TEFC,

synchronous speed 1500 RPM, suitable for operation on 415 volts,

3 phase 50 Hz, AC supply with IP 55 protection for enclosure,

horizontal foot mounted type with Class-'F' insulation, conforming to IS-

325. (c) M.S. fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required. (d) Suitable cement concrete

foundation duly plastered with anti vibration pads. 1.1 2850 lpm at

Architect: ARG Creation PVt. LTD. 36 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying, installation, testing and commissioning of electric driven

pressurisation pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (Jockey Pump)

Horizontal type, multistage, centrifugal pump of cast iron body and

bronze impeller with stainless steel shaft, mechanical seal

conforming to IS : 1520. Suitable HP squirrel cage induction motor TEFC

type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with

IP 55 class of protection for enclosure, horizontal foot mounted

262 type with Class-'F' insulation, conforming to IS : 325. M.S. fabricated No. 1.00 108,830.07

Common base plate, coupling, coupling guard, foundation bolts etc. as

required. Suitable cement concrete foundation duly plastered and

with anti vibration pads. 3.1 180 lpm at 88 m Head.

Supplying, installation, testing and commissioning of diesel engine

driven main fire pump suitable for automatic operation and

consisting of following, complete in all respects, as required :

(Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of

cast of iron body and bronze impeller with stainless steel shaft,

mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM

water cooled with radiator, diesel engine conforming to relevant IS

standard complete with auto starting mechanism, 12 /24 volts

electric starting equipment, diesel tank, exhaust pipe extended upto

m outside pump house duly insulated with 50 mm thick glass

wool with 1.0 mm thick aluminium sheet cladding, residential

silencer, instruments and protection as per standard specification,

263 stop solenoid for auto stop in the event of fault with audio No. 1.00 538,739.13

indications, painted with post office red colour etc. as required. M.S

fabricated, common base plate, coupling, coupling guard,

foundation bolts etc. as required. Suitable cement concrete

foundation duly plastered and with anti vibration pads.

2.7 1620 lpm at 88 m Head

Fabrication, supply, Installation testing & commissioning of Electrical

control panel of cubical construction, floor mounted type, fabricated out

of 2mm thick CRCA sheet, compartmentalised with hinged lockable

doors, dust and vermin proof, powder coated of approved shade after

7 tank treatment process, cable alley, interconnection with suitable

size copper conductor cable/solid copper strip, having switchgears and

accessories, mountings and internal wiring, earth terminals,

numbering etc. complete in all respect, suitable for main fire pump,

pressurisation pump & diesel pump set complete as per CPWD

specification with following in coming and outgoings, suitable for

operation on 415V, 3 phase, 50Hz Ac supply with enclosure

protection class IP 42 as required : 5.1 INCOMING - 400A, 50kA 4 Pole

264 MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector No. 1.00 318,497.51

switch Digital Ammeter (0-400 A) with selector switch & CTs etc.

LED type RYB phase indicating lamps, ON, OFF, trip indicating

lamps Set of Copper Bus Bar 300A. OUTGOING (Note : All outgoing

feeders for pumps should have digital Ammeter with selector

switches and LED type ON, OFF, trip indicating lamps)

265 Supply of 12 V Battery, Coolant, Engine Oil and Diesel Tank. Set 1.00 29,957.63

Architect: ARG Creation PVt. LTD. 37 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and fixing of Air Vessel made of 250mm dia., 8mm thick MS

sheet, 1200mm in height with air release valve on top and

flanged connection to riser, drain arrangement with 25mm dia. gun

266 metal wheel valve with required accessories, pressure guage and No. 1.00 15,615.63

painting with synthetic enamel paint of approved shade as required.

Supply, erection, testing and commissioning of heavy duty G.I. C

Class pipe line as per relevant IS along with fitting like sockets,

bend, elbows, tees, plugs, nipple, flanges, reducer etc. for pump

room & 1 coat yellowxide, 2 coat PO red colour with painting of one coat

of primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. 150mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C

Class pipe line as per relevant IS along with fitting like sockets,

bend, elbows, tees, plugs, nipple, flanges, reducer etc. for pump

room & 1 coat yellowxide, 2 coat PO red colour with painting of one coat

of primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. 100mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C

Class pipe line as per relevant IS along with fitting like sockets,

bend, elbows, tees, plugs, nipple, flanges, reducer etc. for pump

room & 1 coat yellowxide, 2 coat PO red colour with painting of one coat

of primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. 80mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C

Class pipe line as per relevant IS along with fitting like sockets,

bend, elbows, tees, plugs, nipple, flanges, reducer etc. for pump

room & 1 coat yellowxide, 2 coat PO red colour with painting of one coat

of primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. 50mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C

Class pipe line as per relevant IS along with fitting like sockets,

bend, elbows, tees, plugs, nipple, flanges, reducer etc. for pump

room & 1 coat yellowxide, 2 coat PO red colour with painting of one coat

of primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. 40mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C

Class pipe line as per relevant IS along with fitting like sockets,

bend, elbows, tees, plugs, nipple, flanges, reducer etc. for pump

room & 1 coat yellowxide, 2 coat PO red colour with painting of one coat

of primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. 32mm dia.

Supplying, fixing, testing and commissioning of double flanged

sluice valve of rating PN 1.6 with non rising spindle, bronze /

273 gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets No. 2.00 12,531.71

and conforming to IS 780 of following sizes as required. 100mm

Supplying, fixing, testing and commissioning of double flanged

sluice valve of rating PN 1.6 with non rising spindle, bronze /

274 gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets No. 2.00 9,155.05

and conforming to IS 780 of following sizes as required. 80mm

Architect: ARG Creation PVt. LTD. 38 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying, fixing, testing and commissioning of double flanged

sluice valve of rating PN 1.6 with non rising spindle, bronze /

275 gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets No. 4.00 6,168.71

and conforming to IS 780 of following sizes as required. 100mm

Supplying, fixing, testing and commissioning of butterfly valve of

rating PN 1.6 with bronze / gun metal seat duly ISI marked complete

276 with nuts, bolts, washers, gaskets and conforming to IS 13095 of No. 2.00 7,669.15

following sizes : 150 mm dia.

Supplying, fixing, testing and commissioning of butterfly valve of

rating PN 1.6 with bronze / gun metal seat duly ISI marked complete

277 with nuts, bolts, washers, gaskets and conforming to IS 13095 of No. 2.00 5,706.50

following sizes : 100 mm dia.

Supplying, fixing, testing and commissioning of butterfly valve of

rating PN 1.6 with bronze / gun metal seat duly ISI marked complete

278 with nuts, bolts, washers, gaskets and conforming to IS 13095 of No. 2.00 4,264.25

following sizes : 80 mm dia.

Providing, installation, testing and commissioning of non-return

valve of following sizes confirming to IS : 5312 complete with rubber

279 gasket, G.I. bolts, nuts, washers etc. as required : 150 mm dia. No. 4.00 15,223.61

Providing, installation, testing and commissioning of non-return

valve of following sizes confirming to IS : 5312 complete with rubber

280 gasket, G.I. bolts, nuts, washers etc. as required : 100 mm dia. No. 2.00 9,458.05

Supply, Installation, Testing and Commissioning of 100 mm dia.

Pressure Gauge (for all pipes) of range 0 - 15 Kg/cm² conforming to IS -

3624 having bourdon tube of stainless steel 310 in cast

aluminium, stove enameled, black, weather proof case with outer,

281 screwed aluminium bezel and complete with necessary U-type No. 3.00 1,198.30

stainless steel siphon tube and cock including providing suitably

painted angle iron support to the tube etc. as per required.

Providing and fixing of pressure switch in M.S. pipe line including

282 connection etc. as required. No. 4.00 1,323.27

Pump house Cabling : Providing, fixing, testing & commissioning of

283 Sq.mm. 3 Core Alluminium Armoured Cable of required size from Panel Rmt 250.00 333.82

Supplying and fixing Single headed internal Fire Hydrant Valve with

instantaneous stainless steel coupling of 63mm dia. with cast iron

284 wheel ISI marked conforming to IS:5290 (Type-A) with blank cap No. 12.00 5,254.57

and chain required.

Supplying and fixing of 63 mm dia. Gun metal short branch pipe with

20 mm nominal internal diameter size nozzle conforming to IS

285 suitable for instantaneous connection to inter connect hose pipe No. 12.00 2,067.93

coupling as required. Gun metal.

Supplying and fixing of 63 mm dia., 15 m long RRL hose pipe with

mm dia. male and female coupling duly bound with G.I. wire,

286 rivets etc. conforming to IS 636 (Type-A) as required. Gun metal. No. 12.00 4,452.55

Supplying, Installation, Testing and Commissioning of Weather

proof Standard Fire Hose Cabinet wall mounting type (750 mm x

600 mm x 250 mm deep) having single or double opening with

287 necessary locking arrangement by allan key suitable for housing 2 nos. No. 12.00 3,248.26

hose pipe, 1 no. branch pipe & nozzle spanner.

Supplying and fixing of Fire brigade connection of cast iron body

with gun metal male instantaneous inlet couplings complete with

288 cap and chain as required for suitable dia. M.S. pipe connection Set 1.00 11,960.79

conforming to IS:904 as required : 4 way 150mm.

Architect: ARG Creation PVt. LTD. 39 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and fixing of Fire brigade connection of cast iron body

with gun metal male instantaneous inlet couplings complete with

289 cap and chain as required for suitable dia. M.S. pipe connection Set 1.00 5,770.70

conforming to IS:904 as required : 4 way 100mm dia.

Supply and fixing First Aid Hose Reel with M.S. construction spray

painted with P.O. red, conforming to IS:884 complete with the

following as required. 20mm nominal internal dia. water hose

thermoplastic (textile reinforced) type-2 as per IS:12585, 20mm

290 nominal internal dia. gun metal globe valve and nozzle, drum and No. 12.00 7,425.21

brackets for fixing the equipment on the wall. Connection from riser

with 25mm dia. stop gun metal valve & MS pipe and socket. 30 mtr.

FIRE DETECTION SYSTEMS :- Supply, installation and testing of

Addressable Powered loop Manual Call point with built-in Fault

291 isolator, housing & glass - red. Item as per drawing and No. 8.00 3,838.86

specification, as approved by Electrical Engineer in charge.

FIRE DETECTION SYSTEMS :- Supply, installation and testing of

Addressable Bus supplied Power Loop Sounder with built-in flasher,

Different Selectable Tones. Shall have a 'soft start' feature

292 controlled by the fire alarm panel. Item as per drawing and No. 8.00 4,040.00

specification, as approved by Electrical Engineer in charge.

FIRE DETECTION SYSTEMS :- Supply, installation, testing and

commissioning of Four Loop Addressable Intelligent Main Fire

Alarm control panel with operating front panel with network card,

Keypad 300 characters & Multi lines alphanumeric display,

293 events memory, On board Printer interface for external printer, No. 1.00 286,737.29

battery backup. Item as per drawing and specification, as approved by

Electrical Engineer in charge.

Supplying and laying of 2 x 1.5 sq.mm fire alarm armoured cable

600 / 1000 V rated with annealed copper conductor having XLPE

294 insulation, steel wire armouring & FRLS outer sheath complete as Rmt 544.00 148.08

FIRE DETECTION SYSTEMS :- Supply, installation, testing and

commissioning of Below False Ceiling Addressable ideal optical

295 smoke detector for detecting visible smoke particles with mounting No. 160.00 3,766.10

base. Item as per drawing and specification, as approved by

Electrical Engineer in charge.

Providing, fixing, testing & commissioning of 15mm dia. quartxoid

296 bulb type sprinklers of rating 68 degree centigrade with required No. 260.00 446.79

accessories : Pendent sprinkler.

Providing & fixing photo luminescent Signage's as per IS standard in

Block / Small Letters on rigid sheet with necessary wall or Ceiling

297 fittings as specified Sizes : For Fire Extinguisher, Exit, Do not to do etc. No. 120.00 226.83

Supply, installation, testing and commissioning of ABC type 6 kg.

confirm to IS:15683, with ISI marked / TAC approved fitted with

298 required accessories including wall suspension brackets. No. 24.00 1,369.49

FIRE EXTINGUISHER

Supply, installation, testing and commissioning of Carbon Dioxide

299 (CO2) type Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI No. 24.00 4,878.82

marked / TAC approved fitted with required accessories including

wall suspension brackets.

Supply, installation, testing and commissioning of Stainless Steel

300 Ball Valve. (a) 25mm dia. No. 20.00 1,155.51

Supplying, Installing, Testing & Commissioning of M.S. structural

301 steel support. Kg 500.00 81.32

Architect: ARG Creation PVt. LTD. 40 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, Installing, Testing and Commissioning of C.I. heavy duty

302 foot valve with flanges, nut bolts, gaskets etc. with necessary No. 1.00 14,122.88

complete accessories. 150 mm dia.

Supply, Installing, Testing and Commissioning of C.I. heavy duty

303 foot valve with flanges, nut bolts, gaskets etc. with necessary No. 4.00 10,472.33

complete accessories. 100 mm dia.

Providing & fixing flow switch in following size C.I. pipe including

304 connection etc. as required. 100mm dia. No. 4.00 6,431.48

305 Emergency Exit zig zag type M.S. steel stair case with fire door. No. 2.00 149,788.13

Total Amount Rs. =

Total Amount Rs. =

Rupees Thirteen Crore Two lakh Thirty thousand Three hundred Thirty-Two and Zero Paisa Only.

Architect: ARG Creation PVt. LTD. 41 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

I/We am/are willing to carry out the work @............ % above/below percent ( should be written

in figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Add……………………..……..% above

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by

1 the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal

Architect: ARG Creation PVt. LTD. 42 of