COMPREHENSIVE MAINTENANCE OF STANDBY DG SETS FOR DGRE RDC MANALI UNDER AGE I R AND D MANALI

Amount

DG SET OF CAPACITY 63 KVA MAKE: GREAVES POWER Carry out 'B' check kit from authorised rep or service engineer from the manufacturer of DG set of KVA TO 63 KVA capacity for comprehensive maintenace DC Electrical System, Control Panel and accessories and AC wiring and accessories. All as specified and directed by Engr-In-Charge.

DG SET OF CAPACITY 100 KVA MAKE: CUMMINS Carry out 'B' check kit from authorised rep or service engineer from the manufacturer of DG set of KVA TO 100 KVA capacity for comprehensive maintenace DC Electrical System, Control Panel and accessories and AC wiring and accessories. All as specified and directed by Engr-In-Charge.

DG SET OF CAPACITY 400 KVA Carry out 'B' check kit from authorised rep or service engineer from the manufacturer of DG set of 400 KVA capacity for comprehensive maintenace DC Electrical System, Control Panel and accessories and AC wiring and accessories. All as specified and directed by Engr-In-Charge.

Supply and fixing of following Spare parts of DG set 63KVA-400KVA :-V belt for fan/water pump assy etc

Air filter elements

Fuse base 600 Amp

oil Sump gasket

water hose set with clamp

Air hose set with clamp

water temp switch

water temp gauge

oil filter

piston Assembly (one piston with ring)

Diesel filter

Head Gasket

Injector sleeves

Injector sleeves 'O' Ring

cylinder liner

Cylinder head

Ring set

bearings

joint kit complete

Common spares for all types of D G Sets :Supply only distilled water

Supply only coolant

Supply only Lubrication oil/engine oil

supply and fix battery 12 VOLT 180 AH Make : AMARON

Material and labour for cleaning of silencer pipe, replace of exhaust manifold and removing of ropes and re-fixing of new ropes of 63KVA to 100 KVA DG Sets all as specified and directed by Engineer-in-charge.

Taking down of unserviceable Radiator from the 100 KVA DG Set including connected hose pipe etc and cleaning thoroughly all the tubes and fins etc and carrying out copper brazzing to the leakage of the cooling tubes and refixing of the repaired Radiator to its existing position complete all as specified and directed by Engineer-in-charge.

Taking down of unserviceable Radiator from the 400 KVA DG Set including connected hose pipe etc and cleaning thoroughly all the tubes and fins etc and carrying out copper brazzing to the leakage of the cooling tubes and refixing of the repaired Radiator to its existing position complete all as specified and directed by Engineer-in-charge.

supply and fix self starter 24 volt and connected unserviceable portion of electric wiring and carring out new 100 KVA DG set starter refixing of all component and fixed in existing postion including testing commissioning complete all as specified and directed by Engineer-in-charge.

supply and fix self starter 24 volt and connected unserviceable portion of electric wiring and carring out new 400 KVA DG set starter refixing of all component and fixed in existing postion including testing commissioning complete all as specified and directed by Engineer-in-charge.

supply and fix exhaust manifold of 400 kva DG set 100 mm GI pipe 5 m each (02 nos) above the generator shed height with bend to joints with all connected item and painting of pipe black paint complete all as specified and directed by Engr in charge.

Repair/Overhauling of Alternator by removing the Exciter Unit, re-winding the week coil with super enamelled copper wire with proper turn as per the manufacutures instructio to achieve adequate voltage and PF with rated R.P.M including supply and fixing of both end bearing as per the existing and necessary spaires ie capacitor/carbon brush ectc.and other materials, heating vernishing the coil, re-fixing the item in proper position and testing on Load for 63 KVA DG set all as specified and as directed by the Engineer-in-charge.

Repair/Overhauling of Alternator by removing the Exciter Unit, re-winding the week coil with super enamelled copper wire with proper turn as per the manufacutures instructio to achieve adequate voltage and PF with rated R.P.M including supply and fixing of both end bearing as per the existing and necessary spaires ie capacitor/carbon brush ectc.and other materials, heating vernishing the coil, re-fixing the item in proper position and testing on Load for 100 KVA DG set all as specified and as directed by the Engineer-in-charge.

POWER TECH ENGINEERS (BID ID -3138672)