REPAIR/ MAINT OF DG SETS AND EOT CRANES INCL REPAIRS TO INCINERATOR UNDER GE MISSAMARI

Amount

M & L for Servicing to DG set of capacity 500 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at Sewage treatment plant. (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 400 KVA installed at Jalkendra :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 320 KVA installed at UH-ALH, Sangrilla Hall, 41 R&O KLP, 11 PARA SF central Ac plant :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 250 KVA installed at AF Technical Area, 671 EME:- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 200 KVA installed at JK-03 Nos, AF PUMP HOUSE,UAV,GP-II PH & 6679 Maint Flt, 41 R&O/ LCH :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 125 KVA installed at Old PH,Rekhamari PH & 33 KV MRS-I , MRO HUB :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 100 KVA installed at 180 MH,Lama camp PH ,Trolly mounted DG, Signal centre DG set :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 82.50 KVA installed at AF Net (02 Nos) ,Shivagi Nagar St light & UAV- (CCR) troop :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 63 KVA at STP (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 62.50 KVA installed at OMC, Engr Regt ( Stn HQ) ,AF Guard Room ,311 ASC & Div Guard Room, 571 ASC Bn, Perimeter lights (TCP-I, Rekhamari,Nepali Basti), Buffle range,MRS-II,667 MI room, signal centre, 223 Transit camp, STP SPS-02 Nos :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 45 KVA installed at Sewage PH IMPH and signal centre DG set:- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 40 KVA installed at 15 Mobile, 4 CZWKSP,STP Pratap Nagar-I and 180 MH oxygen plant DG:- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 35 KVAinstalled at UAV Troop (06 Nos), MES IB :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 30 KVA installed at Signal centre & 71 DOU, STP SPS :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 25 KVA installed at CCR Sub Stn, STP SPS :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 20 KVA installed at Zonal Wksp :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 15 KVA installed at AF station perimeter security lights, 176 MCO, STP SPS- 02 Nos, 11 PARA SF-02 Nos:- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 10 KVA installed at Stn HQ (MI Room P nagar), STS SPS :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

Description all as per item No 1 here-in-before but capacity 7.50 KVA installed at Immoles (02 Nos), Perimeter security lights :- (i) Fuel filter (Primary & Secondary) - 01 Set (ii) Spin –on filter for lubricant - 01 No (iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set (vi) Cleaning of fuel tank - 01 Job (vii) Tapping adjustment and calibration- 01 job (viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job

M & L Battery leads complete with terminal and lugs (set of three Nos) including removal of extg unsv one complete all as directed.

M & L Battery leads complete with terminal and lugs (set of two Nos) including removal of extg unsv one complete all as directed.

M & L for Fan Belt complete suitable for DG set of capacity 400/320 KVA including removal of extg unsv one compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 250/200 KVA including removal of extg unsv one compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 125/100 KVA including removal of extg unsv one compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 82.50 KVA including removal of extg unsv one compete all as specified and directed.

M & L for Fan Belt complete suitable for DG set of capacity 63.00/62.50 KVA including removal of extg unsv one compete all as specified

M & L for Fan Belt complete suitable for DG set of capacity 45/40.0 KVA including removal of extg unsv one compete all as specified

M & L for Fan Belt complete suitable for DG set of capacity 35/32.50 KVA including removal of extg unsv one compete all as specified

M & L for Fan Belt complete suitable for DG set of capacity 30.00 KVA including removal of extg unsv one compete all as specified

M & L for Fan Belt complete suitable for DG set of capacity 25/20 KVA including removal of extg unsv one compete all as specified

M & L for Fan Belt complete suitable for DG set of capacity 15/12.50/7.50 KVA including removal of extg unsv one compete all as specified

M & L for Radiator Fan Blade complete suitable for capacity 7.5 to 82.5 KVA including removal of extg unsv one compete all as specified

M & L for Radiator Fan Blade complete suitable for capacity 100 to 400 KVA including removal of extg unsv one compete all as specified

M & L for disconnecting all electrical connections from DG set alternator of any capacity from base plate by opening nuts & bolts keeping aside the alternator for inspection and testing & commissioning complete all as specified & directed.

M & L for Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 7.50 KVA to 15.00 KVA DG complete all as specified and directed.

M & L for Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 20 KVA to 40.0 KVA DG complete all as specified and directed.

M & L for Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 62.5 KVA to 82.5 KVA DG complete all as specified and directed.

M & L for Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 100 KVA to 125 KVA DG complete all as specified and directed.

M & L for self starter assembly 24 volts complete suitable for 100 KVA to 400 KVA DG set including removal of extg unsv one complete all as specified and directed.

M & L for self starter assembly 12 volts complete suitable for 7.5 KVA to 82.5 KVA DG set including removal of extg unsv one complete all as specified and directed.

M & L for DC alternator assembly 24 volts suitable for 100 KVA to 400 KVA DG set including removal of extg unsv one compete all as specified.

M & L for DC alternator assembly 12 volts suitable for 7.5 KVA to 82.5 KVA DG set including removal of extg unsv one complete all as specified.

M & L for electronic speed control unit assembly 24 volts suitable for 100 KVA to 400 KVA including removal of extg unsv one complete all as specified .

M & L for SMPS (system main power supply) type control unit assembly suitable for 24 volts battery charger for including removal of extg unsv one complete all as specified .

M & L for SMPS (system main power supply) type control unit assembly suitable for 12 volts battery charger for including removal of extg unsv one complete all as specified .

M & L for AVR (automatic voltage regulator) control unit assembly suitable for 7.5 KVA to 82.5 KVA DG set including removal of extg unsv one complete all as specified.

M & L for AVR (automatic voltage regulator) control unit assembly suitable for 100 KVA to 400 KVA DG set including removal of extg unsv one complete all as specified.

M & L for Brass battery teriminals extended type heavy grade including removal of extg unsv one compiete all as specified.

M & L for SS canopy Stainless steel hinges as per original OEM for acoustic doors with suitable Stainless steel bolts and nuts of DG set including removal of extg unsv one compete all as specified.

M & L for Radiator hose pipe with suitable clamps of DG set including removal of extg unsv one compete all as specified.

M & L for solenoid switch assembly 24 volts suitable for 100 KVA to 400 KVA DG set including removal of extg unsv one compete all as specified.

M & L for solinoid switch assembly 12 volts suitable for 7.5 KVA to 82.5 KVA DG set including removal of extg unsv one compete all as specified.

M & L for Anti vibration pads with suitable bolts and washers including removal of extg unsv one compete all as specified.

M & L for Asbestos Rope including removal of extg unsv one compete all as specified.

M & L for Water pump Assembly suitable for 7.5 KVA to 63 KVA DG set including removal of extg unsv one compete all as specified.

M & L for Water pump Assembly suitable for 82.5 KVA to 125KVA DG set including removal of extg unsv one compete all as specified.

M & L for Water pump Assembly suitable for 200 KVA to 400 KVA DG set including removal of extg unsv one compete all as specified.

M & L for Feed pump suitable for 7.5 KVA to 63 KVA DG set including removal of extg unsv one compete all as specified.

M & L for Feed pump suitable for 82.5 KVA to 125KVA DG set including removal of extg unsv one compete all as specified.

M & L for Electronic Type Starting Switch for 7.5 KVA to 15 KVA DG set including removal of extg unsv one compete all as specified.

M & L for Electronic Type Starting Switch for 30 KVA to 125 KVA DG set including removal of extg unsv one compete all as specified.

M & L for Servicing to oil fired incenerator of capacity 50 Kg/Hr with and including replacement of the worn out spares and cleaning nozzles of fuel injection, wet scrubber, proplet seperator with kerosene oil, ID fan blower including cleaning of Primary chamber, secondary chamber with replacement of unsv fire bricks if required, overhaling the motors, pumpsets and testing for smooth running complete all as manufacturer’s specifications and as directed installed at 15 Mob, 180 MH complete all as specified.

S & F Digital temperature indicating controller to read upto temperature 1200 degree centrigate with 2 set points including removal of existing unserviceable one in the control panel installed at 15 mobile vet hospital and 180 MH complete all as specified and directed.

M & L for primary burner as per existing installed at incenerator complete all as specified.make :- Ecoflame or equivalent

M & L for secondary burner as per existing installed at incenerator complete all as specified.make :- Ecoflame or equivalent

M & L for Ignition transformer 230 V 15 A , 50/60 HZ as per existing installed at incenerator complete all as specified.make :- FIDA TREVISO ITALY or equivalent

M & L for Heat resistant canvas cloth used for the smoke duct as per existing installed at incenerator complete all as specified.

M&L for taking out unserviceable radiator from existing DG set of capacity 200 KVA to 400 KVA for servicing and cleaning by using chemical solution for removal of scaling/foreign material from water fins (tubes) through authorized dealer including checking and repair/replacement of water circulating pumps, thermostat, radiator cooling fan, all types of belts including soldring of damaged radiator fins and hose pipes for smooth functioning, complete all as specified and as directed.

M&L for taking out unserviceable radiator from existing DG set of capacity 62.5 KVA to 125 KVA for servicing and cleaning by using chemical solution for removal of scaling/foreign material from water fins (tubes) through authorized dealer including checking and repair/replacement of water circulating pumps, thermostat, radiator cooling fan, all types of belts including soldring of damaged radiator fins and hose pipes for smooth functioning, complete all as specified and as directed.

M&L for taking out unserviceable radiator from existing DG set of capacity 7.5 KVA to 45 KVA for servicing and cleaning by using chemical solution for removal of scaling/foreign material from water fins (tubes) through authorized dealer including checking and repair/replacement of water circulating pumps, thermostat, radiator cooling fan, all types of belts including soldring of damaged radiator fins and hose pipes for smooth functioning, complete all as specified and as directed.

S & F battery low maintenance heavy duty lead acid of capacity 12 volts 150 AH suitable for DG sets including removal of extg unsv one compete all as specified.Make:- Exide or equivalent Make of Luminous/Amaron.

S & F battery low maintenance heavy duty lead acid of capacity 12 volts 180 AH suitable for DG sets including removal of extg unsv one compete all as specified.Make:- Exide or equivalent Make of Luminous/Amaron.

S & F battery low maintenance heavy duty lead acid of capacity 12 volts 200 AH suitable for DG sets including removal of extg unsv compete all as specified Make:- Exide or equivalent Make of Luminous/ Amaron.

Supply, Fixing and erection of Mild steel canopy Cover for 6679 DG set ( 200 KVA) as per existing size and profile duly painted with two coats of synthetic enamel paint over red oxide primer compete all as specified

M & L for Low oil pressure switch ( LLOP) as per Existing OEM Suitable for upto 200 KVA DG sets capacity compete all as specified

M & L for microprossesor based fully configurated as per Existing OEM controller display panel board Suitable for upto 125 KVA DG sets capacity compete all as specified

M & L for onload change over switch of capacity 63 A (Side handle) insheet metal encloser, 415 V, 50Hz, 4 P compete all as specified Make- Havells model No. IHBFFE0063 or equivalant make of L&T/Indoasian

M & L for onload change over switch of capacity 100 A (Side handle) insheet metal encloser, 415 V, 50Hz, 4 P compete all as specified Make- Havells model No. IHBFFE00100 or equivalant make of L&T/Indoasian

M & L for onload change over switch of capacity 400 A (Side handle) insheet metal encloser, 415 V, 50Hz, 4 P compete all as specified Make- Havells/L&T/Indoasian.

Scraping old paint of any capacity DG set Chessis (Approx coverage area 5-7 Sqm) installed at various locations and Painting with one coats of red oxide paint and two coat of synthetic enameal paint of shade as directed by Engnr-in-Charge.

M & L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron strep 32 x 6 mm as earthing lead by mean of nut/bolt and washer of galvanized iron or steel drawn through 40 mm dia light grade GI pipe as shown in electrical plate no 3 of SSR part I of 2009 including necessary excavation and earth work GI pipe 20mm dia light grade for watering PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to panel board as indicated including testing complete.

M&L for taking out all injector (by using right tools means torque wrench ) from DG set 200 KVA to 400 KVA for servicing through authorised dealar and refixing its original position after repairing including replacement of plunger, washer, jets and any internal parts of injector, complete all as specified and as directed.

M&L for taking out all injector (by using right tools means torque wrench ) from DG set 62.5 KVA to 125 KVA for servicing through authorised dealar and refixing its original position after repairing including replacement of plunger, washer, jets and any internal parts of injector, complete all as specified and as directed.

M&L for taking out all injector (by using right tools means torque wrench ) from DG set 7.5 KVA to 45 KVA for servicing through authorised dealar and refixing its original position after repairing including replacement of plunger, washer, jets and any internal parts of injector, complete all as specified and as directed.

M & L for fuel pipe ( benjo pipe) having length 1 feet to 3 feet of suitable size as per OEM including removal of extg unsv one compete all as specified.

M & L for Hause pipe of suitable size and length as per OEM for 62.5 KVA to 400 KVA including removal of extg unsv one compete all as specified.

M & L for contractor with add on accessories for AMF panel of suitable rating and exciting coil voltage 240/ 415 V as per OEM for 62.5 KVA to 320 KVA including removal of extg unsv one compete all as specified. Make- KOEL/L&T/Havells.

M & L for periodic inspection/ servicing/ overhaulling of 10 Ton capacity flame proof EOT crane of any make installed at different building/location at site, making the cranes in serviceable condition complete all as specified and directed for maintenance specified as under:- (A) LONG TRAVERSE MOTION- (a) Checking gear box oil level, checking and rectification of leakage if any and filling with new oil up to required level. (b) Checking functioning of all brakes of any capacity and making adjustment for proper working. (c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (d) Checking of grease in geared coupling and tighting of nut/bolts etc. (e) Checking of motion cut off at extreme ends with limit switches. (f) Checking drive shaft and coupling including tighting of nut and bolts. (g) Checking oil in FLP thrustors checking any leakage any filling with new oil. (h) Checking terminal connection of all LT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (B) CROSS TRAVERSE MOTION (a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level. (b) Checking functioning of all brakes of any capacity and making adjustment for proper working. (c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (d) Checking of grease in geared coupling and tighting of nut/bolts etc. (e) Checking of motion cut off at extreme ends with limit switches. (f) Checking drive shaft and coupling including tighting of nut and bolts. (g) Checking oil in FLP thrustors checking any leakage any filling with new oil. (h) Checking terminal connection of all CT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any.

(C) HOIST MOTION (a) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level. (b) Checking functioning of all brakes of any capacity and making adjustment for proper working. (c) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement. (d) Checking of grease in geared coupling and tighting of nut/bolts etc. (e) Checking of motion cut off at extreme ends with limit switches. (f) Checking drive shaft and coupling including tighting of nut and bolts. (g) Checking oil in FLP thrustors checking any leakage any filling with new oil. (h) Checking terminal connection of all HT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (D) ELECTRICALS (a) Checking and tightening all electric connection (b) Checking the contactors/ relays etc for overheating or flashing. (c) Cleaning off all connection and control cables. (d) Properly bunching the loose control cable. (e) Checking functioning of cable carriers. (f) Checking the connection and serviceability of VVVF drives for smooth (E) GROUND MOTION CONTROL PANEL Opening the push button control unit, checking all connection, replacing flashed/ over heated connections, general cleaning and checking all the functions,of the LT/CT/ Hoist motion push buttons and lights/ VVVF switch including reassembling the unit complete NOTE :-1. Any minor work Required for overhaulling/proper functining of EOT crane shall be included in unit quoted rate. . 2. Complete Greasing of each parts of crane for proper functining to EOT crane shall be included in unit quoted rate. .. 3. Gear box oil shall be measured and paid separately.

All as per item No. 86 here-in-before but 5 ton capacity flame proof EOT crane complete all as specified and directed. NOTE :-1. Any minor work Required for overhaulling/proper functining of EOT crane shall be included in unit quoted rate. . 2. Gear box oil shall be measured and paid separately.

All as per item No. 86 here-in-before but 5 ton capacity EOT crane installed at 4CZWKSP, 671 EME complete all as specified and directed. NOTE :-1. Any minor work Required for overhaulling/proper functining of EOT crane shall be included in unit quoted rate. . 2. Gear box oil shall be measured and paid separately.

Supply, fixing and making all connections for limit switch 40 Amps 415 Volts all as per existing for LT/CT/ hoist motion of 10/5 ton capacity crane including taking down unserviceable complete all as specified and directed.

Supply only gear oil grade 680 suitable for hydraulic thruster brake complete all as directed.

Supply and fixing brake liner set suitable for 100 mm dia drum for LT/CT motion of 10/5 ton capacity FLP crane inluding taking down unserviceable complete all as specified and directed.

Supply and fixing brake liner set suitable for 160 mm dia drum for hoist motion of 10/5 ton capacity FLP crane inluding taking down unserviceable complete all as specified and directed.

Supply and fixing torque springs suitable for 6 kg capacity 100 mm dia drum brakes of LT/CT motion, including taking out the old unserviceable complete all as specified and directed .

All as per item no 96 here-in-before but 9 kg capacity and 160mm dia drum for LT/CT motion complete all as specified and directed.

S & Fix contactor 20 Amps with 2 NO + 2NC including taking out old unserviceable complete all as directed. Make:- L&T/Havells/Legrand.

All as per item no. 96 here-in-before but of 25 amps complete all as specified and directed. Make:- L&T/Havells/Legrand.

All as per item no. 96 here-in-before but of 32 amps complete all as specified and directed. Make:- L&T/Havells/Legrand.

M & L for push button with element in push button box as per require colour code, including taking out old unserviceable one complete all as specified and directed.

Supply , fixing and making all connection Rotary limit switch capacity 40 Amps 415 volts all as per existing for LT/CT/Hoist motion of 10/5 ton capacity crane, including taking down old unserviceable complete all as specified and directed.

Supply and fixing in replacement of brake shoe of crane of capacity 10/5 ton as per existing one complete all as directed.

R R ENTERPRISES

bkgeneralstores

M/S Singha Enterprise

M/S Mahabir Traders

M/S S.S.Corporation

S H ENTERPRISES