Loading…
Loading…
Tender ID
Tender Value
₹2.9 Cr
EMD Value
₹2.9 L
Closing Date
6 Apr 2026, 5:00 pmClosed
Executive Engineer, Capital Project Division No.2, Gandhinagar
4217 Co. on UD Renovation & Repairing of Toilet & passage At Block No. 10 to 20 (Excapt Block No. 15) At Dr. J M Bhavan, Sector 10 B, Gandhinagar.
289403
23 of 2025-26/03
Open
Civil - All
Works
Gandhinagar
1 document required · 1 mandatory
₹3,600
Yes
Executive Engineer, Capital Project Division No.2, Gandhinagar
₹2.9 L
Yes
24 Mar 2026
24 Mar 2026
24 Mar 2026
6 Apr 2026
24 Mar 2026
Name of Work:4217 Co. on UD
Renovation & Repairing of Toilet & passage At Block No. 10 to 20 (Excapt Block No. 15) At Dr. J M Bhavan, Sector 10 B, Gandhinagar.
MEMORANDUM SHOWING THE ITEM OF WORKS TO BE CARRIED OUT
QUANTITIES ITEMS OF WORK ESIMATED RATES UNIT TOTAL AMOUNT
QUANTITIES ITEMS OF WORK ESIMATED RATES UNIT TOTAL AMOUNT
ESTIMATED BUT IN FIGURE Rs. IN WORDS ACCORDING
MORE OR LESS ESTIMATED
IT NO. Ps.(with L.C
Dismentalling tiled or stone floors laid in mortar including stacking of Smt
1 6694.00 serviceable material & disposal of unserviceable material with all lead and Rupees Fifty and Paise
lift. 50.10 Ten Only
Dismentalling doors, windows, ventilators etc (wood or steel) shutters No.
including chowkhats, architraves, holdfasts and other attachment etc, Rupees One Hundred
complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq. Ninety Seven and
m in area 197.09 Paise Nine Only
Demolition of Brick work and stone masonry including Cmt
stacking of serviceable materilas and disposal of Rupees Five Hundred
unserviceable materials with all lead and lift. (i) In cement Seventy Seven and
Mortar. 577.92 Paise Ninety Two Only
Removing and scraping of old deteriorated plaster of any thickness fromm Smt
wall / R.C.C member including stacking of serviceable material and
disposal of unserviceable from site of work with all lead and lift Rupees Twenty and
20.55 Paise Fifty Five Only
Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with Rmt
5 1240.00 fittings and clamps including stacking the materials with all lead Rupees Seventy Eight
and lift ( for any dia, of pipe) 78.50 and Paise Fifty Only
Demolition and disposal of unserviceable materials with all lead and lift.(i) Cmt
Unreinforced concrete. Rupees Six Hundred
Thirty Nine and Paise
639.72 Seventy Two Only
Dismantling santtary fittings like wash basin . W.C. pan Indian and No.
European type, flushing tank etc. including stacking the materials Rupees Four Hundred
with all lead and lift. Twenty Five and Paise
425.92 Ninety Two Only
(i) Half brick masonry in common brunt clay building bricks Smt
having crushing strength not less than 35 Kg/Sq.Cm. in Rupees Six Hundred
Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in Twenty Nine and Paise
foundation and plinth (B) Conventional 629.79 Seventy Nine Only
Providing 15mm thick cement plaster in single coat on Rough (Similar)side 165.02 Smt
of single or half brick walls for interior plastering upto floor two level and Rupees One Hundred
finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Sixty Five and Paise
Providing and laying coloured glazed tiles of the size 300 mm x 600 mm x Smt
8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster
1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry with Rupees One Thousand
making groove of 3 mm in joint and fill with epoxy etc complete as per the Seven Hundred Eighty
instructions of Engineer In Charge. One and Paise Eighty
1781.89 Nine Only
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) Smt
base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or
fixing on existing flooring by adhesive material including dismentaling of Rupees One Thousand
existing flooring and jointed with color cement slurry including finised Four Hundred Sixty
with flush pointing & cleaning the surface etc. complete for antiskit Seven and Paise
1467.72 Seventy Two Only
Providing laying and jointing in true line and level 15mm Rmt
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including
fittings as approved by Engineer In Charge. Pipe shall be
fixed on the wall with the help of clamp at every two metre
C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing Rupees Seventy Two
the same with adhesive solvent, including cost of all and Paise Sixty Four
materials. 72.64 Only
Providing laying and jointing in true line and level 25mm Rmt
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including
fittings as approved by Engineer In Charge. Pipe shall be
fixed on the wall with the help of clamp at every two metre
C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing Rupees Ninety One
the same with adhesive solvent, including cost of all and Paise Eighty Three
materials. 91.83 Only
Providing laying and jointing in true line and level 40mm Rmt
dia. U.P.V.C. Pipe ( SCH- 40) for cold water including
fittings as approved by Engineer In Charge. Pipe shall be
fixed on the wall with the help of clamp at every two metre
C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing Rupees One Hundred
the same with adhesive solvent, including cost of all Forty Eight and Paise
materials. 148.11 Eleven Only
Providing and fixing concealed center point to wall ceiling & floor Rmt
CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) Rupees Three
15 792.00 seal for potable water of following dia. nominal bore tube fittings Hundred Thirty Eight
and clamps including making good the wall, ceiling and floor etc. and Paise Twenty
complete. [D] 32mm. 338.23 Three Only
Providing and fixing concealed center point to wall ceiling Rmt
& floor CPVC (SDR 13.5) PIPE having National Sanitation
16 36.00 Foundation (NSF) seal for potable water of following dia. Rupees Two Hundred
nominal bore tube fittings and clamps including making Eight and Paise
good the wall, ceiling and floor etc. complete. [B] 20 mm. 208.79 Seventy Nine Only
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working Rmt
pressure polythene pipes of the following outside Dia. Low densidy,
17 759.00 complete with special falnge compression type fittings, wall clipsetc. Rupees Two Hundred
including making good the wall ceiling and floor.(F) 75mm Eighty and Paise
280.23 Twenty Three Only
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working Rmt
pressure poluthene pipes of the following outside Dia. Low densidy,
18 1232.00 complete with special falnge compression type fittings, wall clipsetc. Rupees Three
including making good the wall ceiling and floor.(G) 110 mm Hundred Thirty Nine
339.04 and Paise Four Only
Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm No.
diameter with jali of the following nominal diameter of self cleansing Rupees Five Hundred
design with C.I. Scread down or hinged grating including the cost of Ninety Nine and Paise
cutting and making good the walls. 599.63 Sixty Three Only
Providing and fixing Table top wash basin of size 550 x 400 mm in granite No.
top platform as per drawing incl. moulding polishing with single hole for Rupees Thirteen
20 152.00 pillar tap incl. Providing & fixing fittings such as CP Brass pillar cock, waste Thousand Seven
coupline, C.P. bottle trap etc. comp. (Cera Table top wash basin Calburts Hundred Eighty and
series S2020137 ). 13780.47 Paise Forty Seven Only
Providing and fixing cera / Somany Wall hung Carnival Rimless or No.
equivalent Series vitreous china including jointing the trap with pipe in
C.M. (1 cement : 1 fine sand), 1 long pattern white colour with anchor Rupees Fourteen
fastner & soft close seat cover necessary fittings etc. with jointing cera Thousand Nine
ceora twin flush cistern etc. complete as per direction of engineer in Hundred Thirty Six and
charge. 14936.10 Paise Ten Only
Providing and fixing 15 mm dia. brass C.P. heavy bib cock with brass No.
extension nipple if required As per direction of engineer in charge etc. Rupees Eight Hundred
complete. Sixty Nine and Paise
869.54 Fifty Four Only
Providing and fixing 15 mm dia. brass C.P. heavy Pillar cock/High neck No.
Pillar cock for basin As per direction of engineer in charge etc. complete. Rupees Eight Hundred
Sixty Three and Paise
863.45 Forty Five Only
Providing and fixing 15 mm dia brass C.P. heavy Angle cock with brass No.
extension nipple if required As per direction of engineer in charge etc. Rupees Five Hundred
complete. Eighty Nine and Paise
589.05 Five Only
Providing and fixing C.P. hand faucet heavy duty As per direction of No.
engineer in charge etc. complete. Rupees Nine Hundred
Fifty Four and Paise
954.92 Ninety Two Only
Providing and fixing gun metal check or non return fullway wheel valve No.
(A) 25 mm Rupees Four Hundred
Twenty and Paise
420.63 Sixty Three Only
Providing and fixing Gun metal check or non-return fullway wheel No.
valve.(E) 40mm dia. Rupees Six Hundred
Sixty Three and Paise
663.42 Forty Two Only
Providing and fixing 600 mm x 450 bevelled edge mirror fixed to wooden No.
plug with C.P brass. Rupees Eight Hundred
Fifty Nine and Paise
859.40 Forty Only
Providing and fixing standared extruded of alluminium section of Smt
size 63.50 x 38.10 x 1.95 mm @ Wt 1.094Kg / Rmt with colour
anodized alluminium frame with 5 mm thick transparent bronze Rupees One Thousand
colour tinted float glass with colour anodized alluminium frame for Three Hundred One
ventilation with 5 mm thick frosted glass as details etc complete and Paise Eighty One
for.window 1301.81 Only
Providing and fixing window having extruded aluminum Colour anodized Smt
section frame main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section
no:4605,@ Wt 1.094 Kg / Rmt), horizontal two track member size
mm x 31.75 mm x 1.20mm (of Jindal Section no: 8687 @ wt.of
Kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of
JindalSection no:8758 @ wt.of 0.0.659 kg/mt) with sliding shutters of
30 109.00 horizontal member size 40mm x 18mm x 1.29mm (of Jindal Section
no:8949 @ wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm x
1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @
Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float
glass with powder coated aluminum fittings and fixtures and transparent Rupees One Thousand
silicon sealant glass fixing to frame as per details etc complete for Seven Hundred
window. Thirteen and Paise
1713.69 Sixty Nine Only
Window Grill with colour finish Smt
[1.]Providing and fixing M.S. grills of required pattern to wooden frames
of windows etc. with M.S. flats at required spacings and frame alround,
square or round bars with round headed
bolts and nuts or by screws. (B) plain grill
[2.]Applying priming coat over new steel and other metel surface
31 109.00 after and including preparing the surface by throughly
cleaning, oil,grease, dirt and other foreign matter and
scoured with brushes fine steel wood, scrapers and sand
paper with ready mixed priming paint brushing red lead.
[3.] Painting one coats (excluding priming coat) on previously Rupees One Thousand
printed steel and other metal surface with synthetic enamel Four Hundred Eighty
paint, brushing to give an even shade including cleaning the Four and Paise
surface of all dirt, dust and other foreign matter. 1484.73 Seventy Three Only
Providing and laying polished granite stone slab 18 mm thick in risers of Smt
steps, dedo and pllars laid on 10 mm thick cement mortar 1:3 (1 cement : Rupees Three
3 coarse sand) and jointed with gray cement slurry including rubbing & Thousand Sixty Eight
polishing etc. Complete 3068.16 and Paise Sixteen Only
Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of Smt
primer of approved brand and manufacture on new wall surface to give
33 5184.00 an even shade including thoroughly brushing the surface free from mortar
dropping and other foreign matter and sand papered smooth. Rupees Forty and
40.59 Paise Fifty Nine Only
Wall painting (two coats) with plastic emulsion paint of approved brand Smt
and manufacture on undecorated wall surface to give an even shade
including throughly brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth. Rupees Eighty Three
and Paise Eighteen
Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size No.
580mm (Earthwork, bed concrete, foot reste and trap to be measured Rupees Nine Hundred
and paid for separately) (A) Vitreous China.(I) Long pattern = White colour Eighty Two and Paise
982.13 Thirteen Only
Providing and fixing factory made single extruded WPC (Wood Polymer Smt
Composite) solid decorative type flush door shutter of required size
comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium
carbonate and natural fibers (wood powder/ rice husk/wheat husk) and
non toxic additives (maximum toxicity index of 12 for 100 gms) having
minimum density of 650 kg/cum and screw withdrawal strength of
N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2,
modulus of elasticity 850 N/mm2 and resistance to spread of flame of
36 281.00 Class A category with property of being termite/borer proof,
water/moisture proof and fire retardant. WPC to be laminated with PVC
foil of minimum 14 microns thick of approved design pasted with hot melt
adhesive on both faces of shutter and fixing with stainless steel butt
hinges of required size with necessary full body threaded star headed
counter sunk SS screws, all as per direction of Engineer-In- Charge. (Note: Rupees Four Thousand
stainless steel butt hinges and necessary S. S screws shall be paid Two Hundred Ninety
separately Two and Paise Eighty
Providing and laying Cinder filling for all floors etc complete: (a) Refilling Rupees Seven Cmt
in sunk. Hundred Seventy Nine
and Paise Thirty Six
Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse Rupees Three Cmt
sand : 4- graded stone aggregates 20 mm nominal size) and curing Thousand Seven
38 83.00 complete excluding cost of formwork in (A) Foundation and Plinth Hundred Fifty Eight
and Paise Eighteen
Providing and fixing S.W. gully trap with C.I. grating brick masonary No.
chamber and water tight C.I. cover with frame of 300 mm x 300 mm Size Rupees One Thousand
39 64.00 (inside) with standard weight (i) Square mouth traps. (A) 100 mm x 100 Two Hundred Ninety
mm size - P type Two and Paise
1292.19 Nineteen Only
Constructing Brick masonry road gully chamber 500mm x 450mm x No.
600mm including 500mm x 450mm C.I. horizontal grating wih frame
40 32.00 complete. Rupees Two Thousand
Seventeen and Paise
2017.19 Nineteen Only
Providing and fixing Urinal or approved quality including conecting No.
the Urinal with waste pipe , tap etc. complete.(A) White Rupees One Thousand
earthenware flat back or corner type size 430mm x 260mm x Seventy Four and
350mm. 1074.86 Paise Eighty Six Only
Providing and fixing C.P. brass towel rail comlete with C.P. brass Rupees Six Hundred No.
42 108.00 brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x Sixteen and Paise
20mm size. 616.42 Forty Two Only
Providing and fixing toilet paper holder.(A) C.P. Brass Rupees Four Hundred No.
Twenty Seven and
Paise Ninety Eight
Extra for providing and mixing water proofing material in Litre
44 809.00 Cement concrete in mix proportion recommended by the Rupees Forty Nine and
manufacturers. 49.15 Paise Fifteen Only
Providing and laying damp proof course 25mm thick cement Rupees Three Smt
concrete 1:2:4 (1-Cement : 2 coarse sand : 4 stone aggregate Hundred Twenty
10 mm nominal size) and curing complete Three and Paise Fifty
323.51 One Only
Applying water proofing treatment to sunk portion by applying two coat Smt
Acrylic Polymer base water guard chemical of Fosroc/Sicco/Dr. Fixit or Rupees Three
46 1606.00 equivalent approved by engineer in charge applied with brush after Hundred Forty Two
cleaning of dirt, dust and other foreign material. and Paise Sixty Four
20mm thick sand faced cement plaster on walls upto height Smt
10 metres above ground level consisting of 12mm thick Rupees Three
backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick Hundred Fifteen and
finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. 315.68 Paise Sixty Eight Only
Finishing wall with weather proof exterior emulsion paint on wall surface Smt
(two coats) to give an required shape even shade after thoroughly Rupees One Hundred
brushing the surface to remove all dirt, and remains of loose powdered Twenty and Paise
materials, etc comp. 120.26 Twenty Six Only
Providing and fixing single layer waterproof gypusm board 12.5 mm thick No.
of the make Newgood Group Co. Ltd. or equivalent & Newgood Group Co.
Ltd. company sections using waterproof board of size 1220 mm x
mm x 8.0 mm suspended by G.I suapender of size 25 mm x 3 mm with
intermediate channel of size 18 mm x 40 mm x 0.80 mm at 1220 mm
49 582.00 center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at
mm center to center and perimetre chanel A of size 20 mm x 27 mm x
mm x 0.50 mm at edges & drops including paper tap sand sofit cleat,
anchor fastener, scoch bolt connecting cleat joining compound top coat
on ceiling including making necessary opening for light fitting, diffuser etc. Rupees Six Hundred
complete as per detail drawing as directed. Six and Paise Ninety
606.94 Four Only
Providing and fixing False ceiling of Aerolight light weight Calcium Silicate Smt
tiles Tegular Edge of size 595 x 595 x 15mm densified edge, having 100%
humidity resistance and incombustible as per BS 476 part -4 with thermal
conductivity of 0.043 W/m0 kC, with NRC of .50 and approved surface
design to be placed in the Grid suspended Ceiling with border of Gypsum
sheet. Grid system made of Galvanised steel Section with main "T" runner
3.6 mt long with size 38 x 24 x 0.30 mm spaced at 1200mm c/c and cross
"T" of 1.2 mt long with size 24 x 24x 0.30 mm spaced between main "T" at
50 288.00 600mm c/c to form a grod of 600 x 1200 mm and secondary cross "T" of
length 600 mm to be inter locked at middle of the 600 x 1200 mm panel
to form a grid of 600 x 600 mm. The wall angle of size 24x 24x 0.55 mm to
be fixed all around the perimeter of the wall. The main "T" runner to be
suspended from the ceiling using GI sloted cleats and 50mm long dash
fasteners, 4mm Gl adjustable rods with galvanised level clips with all Rupees Seven
labour and material and as directed by Engineer incharge. Hundred Eighty Six
and Paise Eighty Four
315.00 Repair of Concrete : Step 1 : Remove all loose concrete with chisel and Smt
make the depth of repair uniform , Step2 : Clean the reinforcement with
wire brush and rust remover Rebakleen to remove all loose rust and apply
one coat Zinc rich primer (Master Emaco P130) Step 3: Applying single
component thixotropic, duel shrinkage-compensated, high strength, fibre
reinforced, cementitious patch repair mortar that achieves compressive
strength minimum of 15 MPa at 1 day and 45 MPa at 28 days and capable
51 of applying 50mm thick mortar layer with EMACO S48CT of BASF make
powder(80kg per Smt) mixed with clean, dry aggregate of size ranging
from 6mm to 10mm in the proportion of 25% by weight of dry powder of
EMACO S48C T of BASF to the chipped concrete by trowelling using steel Rupees Four Thousand
trowel in layer of 50mm average thickness complete. Step 4 : Apply one
Six Hundred Thirty
coat of water based concrete curing compound (FOSROC make Concure
WB) inclusive of Manpower, Material and Equipment.work complete as Five and Paise Eighty
per the instuction of EIC/Client/Architect. At All Floors 4635.81 Only
Providing and fixing Galvanized Z Patti with U Clamps as per design given Rmt
by Engineer in charge for fixing the C.I. / G.I. / PVC pipe on wall of duct to Rupees One Hundred
stay away from wall including required scaffolding and oil painting three Sixty Two and Paise
coats etc. complete. 162.61 Sixty One Only
Civil Work Total Rs. (A)
Electrical Works Item
Replacing old & U/s by Point wiring for Light / Bell with 2-1.5 sq.mm &
earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade
FRLS PVC insulated multi strand copper wires up to 10 mtr length , in
below type of pipe erected with 6A Modular type switch / bell push &
Hundred Eighty Five
53 383 accessories and earth continuity of following type, erected on PVC / 485.81 pts
And Paise Eighty
Metallic/Wooden box, single mounting base frame covered with
textured/metallic/white front plate modules erected on / in wall / ceiling as
per pipe erected, with necessary Lamp holder/ceiling rose /
H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected concealed
in wall/ceiling complete
Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm
& earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade
FRLS PVC insulated multi strand copper wires, in below type of pipe to
be erected complete with earth continuity and necessary connection with
54 primary light with accessories erected on Metal / PVC / wooden box Rupees Nil
covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open /
concealed wiring. with necessary Lamp holder / ceiling rose /
H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected concealed Rupees One
in wall/ceiling complete Hundred Sixty
Seven And Paise
Point wiring for on board Looped Plug with 6A Modular type switch &
pin socket erected on PVC / Metallic/Wooden box, single mounting base
Hundred Fifty Seven
55 22 frame covered with textured / metallic/white front plate modules erected 257.55 Nos
And Paise Fifty Five
on / in wall / ceiling with following type accessories Cat. III
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI
marked stranded Copper conductor wire in following type of pipe to be
56 erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper Rupees Nil
conductor FRLS PVC insulated stranded wire of green colour for earth
continuity of following size
(A) With medium class Rigid PVC pipe and accessories Rupees Nil
(b) 2 wire 2.5 sq. mm Rupees Eighty Two
2910 82.82 And Paise Eighty mtrs
Replacing old & U/s by Supplying and erecting LED indoor fittings with
LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with
housing used as a heat sink shall be made of thick sheet Steel
conforming to IS: 513/CRCA/ aluminium die cast powder coated and high
U.V. & corrosion resistance with diffuser with company mark/name 160V
to 270V, Power Factor more than 0.95, THD < 15%,CCT 3000 K to
6500K,Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description
have shown ranges of Wattage capacity of LED fittings.The Engineer
57 incharge may select any wattage capacity between the ranges shown.) Rupees Nil
(A) Tube Light with integral driver Rupees Nil
(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet Cat-lll Rupees One
Hundred Sixty Five
And Paise Sixty Four
(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Rupees Three
Hundred Seventy
Three And Paise
Providing & erecting stand alone ceiling mount PIR motion Sensor
with ABS Housing single phase AC operation. Complete with Dual
element pyroelectric sensor, Digital Signal Processing Detection
Range 14 feet at 10 feet height, angle 360 degree, RFI and EMI
immunity, Detects motion in it's coverage area. Multipurpose device 4366.23 Hundred Sixty Six Nos
can be used as security device, an energy saving device, an And Paise Twenty
automatic switch. Complete with infra red sensor, Light & sensitivity Three Only
Sensor, Timer with Bye pass facility. Suitable for 400 watts
electrical load
Replacing old & U/s by Supplying & erecting approved make low noise
59 58 decorative exhaust fan having square frame ABS body with inbuilt lowers Rupees Nil
& square frame.
200mm with 1350RPM Cat.II
1703.87 Hundred Three And Nos
Paise Eighty Seven
Replacing old & U/s by Supplying & erecting single phase approved make
industrial exhaust fan suitable for medium duty ring mounted low noise
operation suitable for medium duty having following dia size and
maximum speed in RPM
[A] 305 mm dia 900 RPMCat.II Rupees Two
Thousand Fifty Four
And Paise Thirty
Providing window frame suitable for erection of Exhaust fan complete Rupees One
covering the remaining portion of window with 15 mm. thick plywood and Hundred Seventy
colour washing to match the colour of the wall. Two And Paise
Seventy One Only
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt
to 0.5 Watt assembled on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming to IS:
513/CRCA/aluminium pressure die cast powder coated and high U.V. &
corrosion resistance with diffuser housed in aluminium casted body with
company mark/name
160V to 270V,Power Factor more than 0.95, THD < 15 %,
CCT 3000 K to 6500K, Rupees One
Luminaire efficacy> 85 lumens/watt , Hundred Seventy
LED driver efficiency > 85 % Two And Paise
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description Seventy One Only
have shown ranges of Wattage capacity of LED fittings.The Engineer
incharge may select any wattage capacity between the ranges shown.)
(A) Square/ Circular shaped Surface/Recessed Mount Downlight with
provision for spring loaded mounting clips complete.IP20
(iii) 16-20 watts, Surge-2 KV
Electrical Work Total Rs. (B)
Civil Work + Electrical Work (A+B) = C Total Rs.
Rupees Two Crores Eighty Nine Lakhs Nine Thousand Eight Hundred Twenty Eight and Paise Twenty Nine Only
I/We am/are willing to carry out the work at....................................................% Above/Below.........Percentage (Should be written in figure and Amount fo my/our tender work as under.
*Estimated Amount *Estimated Amount
Put to Tender 28909828.29 Put to Tender
Deduct:..........%Below Add:............%Above
*(Please strike out whichever is not applicable.)
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.
therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of
input rate mentioned in all the tender.
5. All the works shall be carried out as per Public works Department Hand Book and other Specification of the Division or as directed
6. Rates quoted include clearance of site ( Prior commencement of work and its close ) in all respects and hold good for work under all condition, site,moisture/weather etc.
7. Rate of Dismantled material shall be deducted from bill at the rate mentioned in attached statement here if all over tender will be below than the estimated cost.
8.In case of Tender Quoted above the rate than estimated cost of dismantled item will be increased by percentage quoted by agency.
9. I/We hereby declare that, I/We have carefully studied conditions of contract, Specifications & Other documents of this work and agree to execute that same accordingly.
10. The Price bid shall include all taxes, duties, livies, fee and other charges as per applicable taxes including Goods & Service tax & Labour cess.
Deputy Executive Engineer Executive Engineer
Sign of Contractor
Capital Project Sub Division No.7 Capital Project Division No.2
Gandhinagar Gandhinagar
List of Dismantling Material (Civil Work)
Rupees Four Hundred
Forty Two and Paise
442.20 Twenty Only No.
Hundred Seventy and
370.95 Paise Ninety Five Only No.
3)Ventilator Rupees One Hundred
160.00 Two and Paise Forty
102.40 Only No.
4) Bib tap/ Pillar tap/ Stop tap Rupees Sixty and
3347.00 Rupees Forty One and
41.76 Paise Seventy Six Only Rmt
40.00 Rupees Sixty One and
61.44 Paise Forty Four Only No.
80.00 Rupees Seventy Six
76.80 and Paise Eighty Only No.
240.00 Rupees Seventy Eight
Rupees Two Hundred
Thirty Nine and Paise
239.57 Fifty Seven Only Smt
Rupees Two Hundred
Ninety Eight and Paise
298.19 Nineteen Only Smt
Rupees One Hundred
Eighty and Paise Sixty
180.69 Nine Only Smt
Rupees One Hundred
Eighty and Paise Sixty
180.69 Nine Only Smt
Rupees One Hundred
Eighty and Paise Sixty
180.69 Nine Only Smt
14)Brick bat 70% Rupees Two Hundred
16.10 Forty Five and Paise
Less: Credit of Materials : Civil Work (D) Rs.
List of Dismantling Material (Electrical Works)
Sr. No. Quantity Item PER Total
In Figure In Words
Rupees Twelve and
1 320 Cost of old and u/s LED T-5 Fitting 12.0 nos
Rupees One Hundred
2 100 cost of old and u/s all type of ex fan 180.0 Eighty and Paise Zero nos
3 1 cost of old and u/s various sizes of cable,wires and pipes 1000.0 Rupees One Thousand Lot
4 1 cost of old and u/s switch board,switches,socket,regulators,bells 1000.0 Rupees One Thousand lot
Less: Credit of Materials : Electrical Works (E) Rs.
Credit of Dismantle Materials: Civil Work + Electrical Work (D+E) = F Total Rs.
Deputy Executive Engineer Executive Engineer
Sign of Contractor
Capital Project Sub Division No.7 Capital Project Division No.2
Gandhinagar Gandhinagar
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Electric Document.pdf
File-3 E-Tendering Notice.pdf
File-4 Notice Inviting Tender.pdf
File-5 Sbd.pdf
File-6 Schebulde -B.pdf
File-7 Eligibility Criteria.pdf
File-8 Index of Specifications (3).pdf
File-9 Detailed Specification (3).pdf
File-7 Condition and G.R. (2)_1.pdf
File-7 Condition and G.R. (2)_2.pdf
File-7 Condition and G.R. (2)_3.pdf
File-7 Condition and G.R. (2)_4.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .