Providing and Supplying of Furniture Items for the Construction of Adarsh Nivasi School, Government Boys & Girls Hostel Building, B & C Type Quarter, D-Type Bunglow At Meghraj Taluka : Meghraj District : Arvalli

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

1 Providing and supplying High back Executive chair with M.S 3.00 6565.00 Nos

frame work. Upholstered with Artificial leather/Leatherette

and molded PU foam, together with molded seat & back

covers. The back foam should be designed with contoured

lumber support for extra comfort. Caster of high durability &

hydraulic. The chair should have cylinder with 5 years

warranty. The size of chair 53cm x 79cm (Back side) and

51cm x 49cm (seat size). The PU foam should be molded

with density =45 ± 2 kg/m3. with One piece armrests. The

armrests are scratch and weather resistant. The permanent

contact mechanism is designed with 360° revolving type, 12º

seat tilt 19° back tilt, Front pivot for tilt with feet resting on

ground ensuring more comfort, Tilt tension adjestment,

position locking with anti-shock back mechanism, Which

should prevent the backrest from impacting the user when

the lock is released, static seat depth adjustment= 0.5 cm

position locking.

2 Providing and supplying Medium back chair for conference 15.00 4848.00 Nos

with M.S frame work. Upholstered with changeable fabric

upholstery covers (as per requirement) and molded PU

foam, together with molded seat & back covers. The back

foam should be designed with contoured lumber support for

extra comfort. Caster of high durability & hydraulic. The chair

should have cylinder with 5 years warranty. The size of chair

47.5cm x 58cm (Back side) and 49cm x 48cm (seat size).

The PU foam should be molded with density =45 ± 2 kg/m3

.with One piece armrests. The armrests are scratch and

weather resistant. The permanent contact mechanisms is

designed with 360° revolving type, with pneumatic height

adjustment & 17 ° maximum tilt only & tilt tension adjustment

3 Providing and supplying Low back chair for work center & 150.00 3434.00 Nos

other staff the seat & back are made of M.S frame work.

Upholstered with changeable fabric upholstery covers (as

per requirement) and molded PU foam, together with molded

seat & back covers. The back foam should be designed with

contoured lumber support for extra comfort. Caster of high

durability & hydraulic. The chair should have cylinder with

years warranty. The size of chair 45cm x 45cm (Back side)

and 45cm x 43cm (seat size). The PU foam should be

molded with density =45 ± 2 kg/m3. with One piece

armrests. The armrests are scratch and weather resistant.

The permanent contact mechanisms is designed with 360°

revolving type, with pneumatic height adjustment & 17°

maximum tilt only & tilt tension adjustment facility.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

4 Providing and supplying Visitor or Guest chair the seat & 80.00 2474.50 Nos

back are made of 12mm thick hot pressed plywood

upholstered with changeable fabric upholstery covers (as per

requirement) and molded PU foam, together with molded

seat & back covers. The back foam should be designed with

contoured lumber support for extra comfort. The size of chair

45cm x 38cm (Back side) and 45cm x 43cm (seat size). The

PU foam should be molded with density =45 ± 2 kg/m3. The

armrests with Leg made with Powder coated MS structure as

structure with required necessary hardware.

5 Providing and supplying chair with side desk (foldable 100.00 2573.48 Nos

mechanism) made with 19 mm Thk MDF board (M7) fixed

with M.S structure armrest fixed with required necessary

fixtures and fastening (Hardware) (M24).Top part of desk

finished with 1.00 mm Thk decorative laminate (M24). Back

and side part of desk finished with enamel paint (M31) as per

of 12mm thk. hot pressed plywood upholstered with

changeable fabric upholstery covers (as per requirement)

and molded PU foam, together with molded seat & back

covers. The back foam should be designed with contoured

lumber support for extra comfort. The size of chair 45cm x

38cm (Back side) and 45cm x 43cm (seat size). The PU

foam should be molded with density =45 ± 2 kg/m3. The

armrests with Leg made with Powder coated MS structure as

structure with required necessary hardware.

6 Providing and supplying Main Table having size 2600mm X 1.00 20200.00 Nos

850 X 750(H) mm with side table of size 1200 X 400 X

750(H)mm and Drawer Unit of size 900 X 850 X 750(H)mm

made with 19mm Thk. Plywood (M1) structure as per

architect drawing finished with 1.0mm Thk. decorative

laminate (M24) on outside portion &0.8 mm Thk.liner

Laminate inside as specified & approved by architect fixed

withnecessary fixtures and fastening (Hardware) (M14) as

per architectdrawing. Provide Plastic Computer Desk Table

Grommet Cable WireOutlet Hole Cover 60mm, Key-board

trey, S.S legs, Drawers with telescopic roller channels (M15),

Handle (M19) and locking (M16) arrangements with all

necessary fixtures and fastening (M14). Provide Shutters as

per drawing fixed with handle (M19), hinges (M18), magnet

(M14), complete with bidding patties and all required

hardware (M14). Provide footrest as per drawing. All

exposed edges shall be covered with required Teak wood

beading Patti (M4) finished with approved melamine

polishing (M29) work. Complete as per architect's drawing

and as per instruction of architect & engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

7 Providing and supplying Workstation Table having size 1350 2.00 14422.80 Nos

X 750 X 750(H) with side table of size 900 X 400 X

750(H)mm and 3 Drawer Unit made with 19mm

Thk.Plywood(M1) structure as per architect drawing finished

with 1.0 mmThk. decorative laminate(M24) on outside

portion &0.8 mm Thk. linerLaminate inside as specified &

approved by architect fixed with necessary fixtures and

fastening (Hardware) (M14) as per architect drawing.

Provide Plastic Computer Desk Table Grommet Cable Wire

Outlet Hole Cover 60mm, Key-board trey, Soft-board, S.S

legs, Drawers with telescopic roller channels (M15), Handle

(M19) and locking (M16) arrangements with all necessary

fixtures and fastening (M14). Provide Shutters as per

drawing fixed with handle (M19), hinges (M18), magnet

(M14), complete with bidding patties and all required

hardware (M14). Provide footrest as per drawing. All

exposed edges shall be covered with required Teak wood

beading Patti (M4) finished with approved melamine

polishing (M29) work. Complete as per architect's drawing

and as per instruction of architect & engineer in charge.

8 Providing and supplying Table having size 1350 X 750 X 3.00 12301.80 Nos

750(H) with side table of size 900 X 400 X 750(H)mm and

Drawer Unit made with 19mm Thk. Plywood (M1) structure

as per architect drawing finished with 1.0 mm Thk.

decorative laminate(M24) on outside portion &0.8 mm Thk.

liner Laminate inside as specified & approved by architect

with fixed with necessary fixtures and fastening (Hardware)

(M14) as per architect drawing. Provide Plastic Computer

Desk Table Grommet Cable Wire Outlet Hole Cover 60mm,

Key-board trey, S.S legs, Drawers with telescopic roller

channels (M15), Handle (M19) and locking (M16)

arrangements with all necessary fixtures and fastening

(M14).Provide Shutters as per drawing fixed with handle

(M19), hinges (M18), magnet (M14), complete with bidding

patties and all required hardware (M14). Provide footrest as

per drawing. All exposed edges shall be covered with

required Teak wood beading Patti (M4) finished with

approved melamine polishing (M29) work. Complete as per

architect's drawing and as per instruction of architect &

engineer in charge.

9 Providing and supplying sofa. (3 seated) made with using 10.00 11029.20 Nos

19mm Thk. Plywood (M1) structure frame with S.S. legs

required necessary support fixed with necessary fixtures and

fastening (Hardware)(M14). It shall be covered with

Density PU foam(M22) with required Thickness as per

design in seat & back and handle portion this should be

again covered with 14 mm thick PU foam(M22) with

Madarpat cover on it & upholstered fabric(M26) or leather of

suggested & approved by architect finished with seat, back &

all visible side as per architect drawing. Complete as per

architect's drawing and as per instruction of architect &

engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

10 Providing and supplying sofa(2seater) made with using 6.00 9332.40 Nos

19mm Thk. Plywood (M1) structure frame with S.S. legs

required necessary support fixed with necessary fixtures and

fastening (Hardware) (M14). It shall be covered with

Density PU foam(M22) with required Thickness as per

design in seat & back and handle portion this should be

again covered with 14 mm thick PU foam (M22) with

Madarpat cover on it & upholstered fabric (M26) or leather

of suggested & approved by architect finished with seat,

back & all visible side as per architect drawing. Complete as

per architect's drawing and as per instruction of architect &

engineer in charge.

11 Providing and fixing eco-friendly light weight calcium 600.00 721.14 Sqmt

silicate false ceiling tiles having Tegular edge & 15 mm Thick

Densified edges on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles shall have, light

reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity

0.043° w/m KC.for the best thermal Insulation. The Light weight

calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/ Cosmos having NRC value of 0.5 & Globe having

NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to

be laid on true horizontal level suspended inter locking metal

grid of hot dipped galvanized steel sections (galvanizing @120

grams per sqm including both side) consisting of main ‘T’

runner suitably spaced at joints to get required length and

size of 24 X 38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24 X 28mm

made out of 0.33mm (Minimum) sheet spaced 1200mm

along spaced between main 'T' at 600mm centre to centre

to form agrid of 1200x600mm and size 24x48mm made of

0.30mm thick (Minimum) sheet to be interlocked at

middle of the 1200x600mm panel to form grid of size

600x600mm resting on periphery walls/partitions on a

perimeter wall angle pre- coated steel of size (24x24x3000mm

made of 0.40mm thick (minimum) sheet with the help of rawl

plugs at 450mm centre to centre with 25mm long dry wall

screws @ 230mm interval and laying 15mm thick densified

edges light weight calcium silicate ceiling tiles of approved

texture (Fine

12 Painting (Three coats) with plastic emulsion paint of 400.00 65.04 Sqmt

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

13 Providing and supplying Corner Table/Tipoi with Glass top 8.00 3676.40 Nos

made with 19mm Thk. Plywood (M1) finished with 1.0 mm

Thk. decorative laminate sheet (M24) specified and

approved by architect & fixed with necessary fixtures and

fastening (Hardware) (M14) inclusive of approved melamine

polishing (M29) work. Top part of center Table covered with

8 mm Thk. toughened Glass (M27) with Polished Edges.

Complete as per architect's drawing and as per instruction of

architect & engineer in charge. (Refer drawing). Size : 600 X

14 Providing and supplying Centre Table/Tipoi with Glass top 8.00 4242.00 Nos

made with 19mm Thk. Plywood (M1) finished with 1.0 mm

Thk. decorative laminate sheet (M24) specified and

approved by architect & fixed with necessary fixtures and

fastening (Hardware) (M14) inclusive of approved melamine

polishing (M29) work. Top part of center Table covered with

8 mm Thk. toughened Glass (M27) with Polished Edges.

Complete as per architect's drawing and as per instruction of

architect & engineer in charge. (Refer drawing). Size : 900 X

15 Providing Visitor’s group seating of three people made from 15.00 5853.96 Nos

perforated S.S. CRC sheet (C-201), steel plate with 1.5mm

thick. Bottom: made from 20mm x 40mm S. S.CRC tubes as

per sample finished with stainless steel chrome plated as

specified in specification sheet and as approved by Engineer-

in-charge.

16 Providing and supplying Full height Storage unit having 390.62 4391.88 Sqmt

height of 2100m and 450mm deep made with using 19mm

Thk. Plywood (M1) structure and finished with 1.0 mm Thk.

decorative laminate(M24) sheet on outside & and 0.8 mm

Thk. liner laminate (M25) in inside as specified approved by

architect with fixed with necessary fixtures and fastening

(Hardware) (M14) As per architect drawing. The shutter shall

be fixed with required handle (M19), hinges (M18)., magnet

(M18) & Locks (M16) complete with bidding patties (M4) and

all required hardware (M14). Ply shelves removable Type

supported on side teak wood (M5) battens on both sides. All

exposed edges shall be covered with 2 mm Thk. PVC Edge

Banding finished. Complete or as directed as per architect

drawing and as per instruction of architect & engineer in

17 Providing and fixing storage with the shutters made of 19mm 80.50 6122.62 Sqmt

thk. post forming in approved shade and 6mm glass panel

fixed with PVC Beading finished with matching laminate.

19mm plywood shelves with both side 0.8mm laminate

finished. All exposed edge shall have PVC beading in

approved shade. Lock, handle, Auto hinges & including all

materials and labour etc. complete as per detail drawing and

instruction of Architect. (Size: 1200mm x 450mm x 2100mm)

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

18 Providing and fixing 100 mm thick drywall partition 20.00 1575.20 Sqmt

consisting of 75 mm wide C-studs made from 0.6 mm thick

galvanized steel sections, spaced at a maximum of 625 mm

center-to-center for the internal framing. Both sides of the

frame shall be cladded with 12.5 mm thick gypsum boards

having a fire rating of up to 1 hour, fixed with appropriate

fixtures and fastening hardware (M14), and finished with

necessary surface preparation and wall paint. A 60 mm thick

layer of mineral wool insulation (raw density: 27 kg/cum)

shall be provided within the partition cavity for acoustic and

thermal performance. The minimum overall wall weight

shall be 30 kg/sq.m. (suitable for Conference Hall

partitions). It shall be confirmed and approved in advance

by the Architect, along with a description and image, or as

directed by the Engineer-in-Charge.

19 Providing and supplying computer table with partition made 20.50 5740.84 Sqmt

with 19mm Thk. Plywood (M1) structure as per architect

drawing finished with 1.0 mm Thk. decorative laminate (M24)

on outside portion & 0.8 mm Thk. liner Laminate inside as

specified & approved by architect with fixed with necessary

fixtures and fastening (Hardware) (M14) as per architect

drawing. Provide Plastic Computer Desk Table Grommet

Cable Wire Outlet Hole Cover 60mm, Key-board trey, S.S

legs fixed with all necessary fixtures and fastening (M14).All

exposed edges shall be covered with required Teak wood

beading Patti (M4) finished with approved melamine

polishing (M29) work. Complete as per architect's drawing

and as per instruction of architect & engineer in charge.

20 Providing and supplying Roller Blinds assemblies are to be 30.00 1838.20 Sqmt

supplied & installed in all windows with great precision. It

should be water resistant and fitted on aluminum head rails

duly powder coated and fitted with stainless steel drive rods.

Manual operated and should have ISI mark. Complete or as

directed as per architect & engineer in charge. (M34)

21 Providing and fixing as per approved make Roman 647.83 1428.14 Sqmt

curtain as suggested fabric. Fabric with manual operation

and warranty etc as per manufacturer’s specifications.

Fabric to be as per approved sample. All the work

complete as per the detailed drawing and instruction of

Architect/Client. (Contractor shall provide treated conceal

channel complete in all respects on which all curtains shall

be fixed and should also take load of all the manual

curtains). All complete as per approval of designer &

instruction of PMC.Work completed as per the detailed

drawing and instruction of Architect/Client. Height will be

measured from top of the conceal channel to floorm top/sill

bottom lvl and clear opening size only there will be not extra

payment towared overlaping.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

22 Providing and supplying Display table made with using 36.00 8908.20 Nos

19mm Thk. Plywood (MI) structure finished with 1.0 mm Thk.

decorative laminate (M24) sheet approved by architect fixed

with necessary fixtures and fastening (Hardware) (M14). Top

portion of table all edges shall be covered with required Teak

wood beading Patti (M4) finished with approved melamine

Polishing (M29) work. Complete as per architect's drawings

and as per instruction of architect & engineer in charge.

(Refer drawing) Size : 1350 X 750 X 750(H) mm

23 Providing and supplying Display table made with using 7.00 10718.12 Nos

19mm Thk. Plywood (MI) structure finished with 1.0 mm Thk.

decorative laminate (M24) sheet approved by architect fixed

with necessary fixtures and fastening (Hardware) (M14). Top

portion of table all edges shall be covered with required Teak

wood beading Patti (M4) finished with approved melamine

Polishing (M29) work. Complete as per architect's drawings

and as per instruction of architect & engineer in charge.

(Refer drawing) Size : 2250 X 850 X 750(H) mm

24 Providing and supplying Laboratory Table made with good 14.00 11312.00 Nos

quality wood and top finished with approved melamine

polishing work (M29) and 19mm Thk plywood (M1) for

drawers finished with 1.0 mm Thk decorative laminate (M24)

on outside portion and 0.8 mm Thk liner laminate inside as

specified and approved by architect. Provide two no. of

Drawers with telescopic roller channels (M15), Handle (M19)

and locking (M16) arrangements with all necessary fixtures

and fastening (M14). Whole table made with required size of

M.S. frame structure finished with approved superior quality

synthetic enamel paint of standard metal and ISI markets

confirming to IS-2392 shall be applied. Complete as per

architect's drawings and as [er. instruction of architects and

engineer in charge. (Refer drawing) M.S. structure of table

50 x 50 mm square box section legs. Supportive framing

work 25 x 50 mm box Section and 25 x 25 "L" section. Table

Size : 1500 X 750 X 750(H) mm

25 Providing and Supplying 2 seater Bench made of Steel 165.00 4708.62 Nos

structure of MS angle & made with using 19mm Thk Plywood

(M1). Structure finished with 1.0 mm Thk decorative laminate

(M24) sheet fixed with necessary fixtures and fastening

(Hardware) (M14) top, Seat & Back rest with ms structure.

Made of MS square box section 25 x 25 x 2.6 mm welded

and one coat of metal primer of reputed made shall be

applied after proper surface finishing and applying putty on

the surface and over it one under coat and one final coat of

superior quality synthetic enamel paint of standard make and

ISI market confirming to IS- 2392 shall be applied. The whole

consignment of supply order shall be painted in the same

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

26 Providing and fixing green board 8x5 ft. size with glassboard 16.00 4609.64 Nos

dull finished green sheet with 100x25mm teak wood fram of

25mm thikness with french polish etc. completed

27 Providing and placing Open type Storage Rack with following 25.00 3916.78 Nos

: Size: 2130 (H) X 1080 (W) X 380 (D) mm 1. Rack with

Compartments of 6 nos. of shelves. Distance between

each shelf will be 410 mm. These 6 shelves will be

hanging arrangement (adjustable). 2. Racks will be

manufactured from Slotted M.S angle 2 mm thk.

Shelves will be manufactured from 0.9 mm thick sheet.

4. The rack will be assembled with G I bolt, nuts and

washers. 5. Slotted angle and M.S sheet will be made of cold

rolled with 10 tanks anti-rust treated and will be finished

with powder coating. (Colour prince Grey) or as directed

H/D Rubber bushes will be provided to the bottom of legs of

slotted angle racks. 8. The quality of M.S sheet which is

used for racks will be free from any defects,

Undulations, and old paints and surface corrosion, etc.

as directed by Engineer in chargeetc. complete.

28 Providing and placing Indian teakwood Stool Legs & support 120.00 1414.00 Nos

should be made from teak wood & top is made from 19mm

all proof ply IS 710 including 1mm lamination sheet on top

and remaining porition with good quality polishing stool

Size: (L) 30 cm x (B) 30 cm x(H) 90 cm. All works shall be

carried out as per directed by engineer in charge.

29 Providing and supplying workshop and lab stage made with 36.56 5797.40 Sqmt

using 19mmThk plywood (M1) and good quality wood (M5)

frame structure with required necessary legs support fixed

with necessary fixtures and fastening ( hardware) (M14) All

exposed edges shall be covered with required teak wood

beading Patti (M4). The whole workshop and lab stage

finished with approved superior quality synthetic enamel

paint of standard make and ISI market confirming to IS-

2392 shall be applied. Complete as per architect’s drawings

and as per instruction of architect and engineer in

charge.(Refer drawings)

30 Supplying and fixing Notice board made from teak wood size 13.00 4242.00 Nos

of board is 1.95 x .90 x 0.05 with 3mm plain glass door

including thrmocole coted inner side with wellvet cloth

upper side also including backside 9mm thick allproof

ply and polishing including necessary handles locking

arrgnte ment as directed by engineer-in-charge.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

31 Providing and supplying Podium made with using 19mm Thk 11.00 5053.64 Nos

Plywood (M1) structure finished with 1.0 mm Thk decorative

laminate(M24) sheet approved by architect fixed with

necessary fixtures and fastening (Hardware) (M14).all edges

shall be covered with required Teak wood beading Patti (M4)

finished with approved melamine polishing (M29 work. The

podium shall also provision for carrying wires & mounting

electrical plug point, switches & mike etc. Complete as per

architect’s drawings and as per instruction of architect &

engineer in charge. Size : - 58 x 38 x 110 cm

32 Providing & fixing Library table of size 2.40 x 0.90 x 24.30 5087.57 Sqmt

height .75m using 19 mm thick allproof plywood of BWR

confirming to IS 710 of green or century make, designs

& grooves as directed by architectural drawings, lamination

of 1.0 mm thick in single or double shade of green, broom

or equivalent make of plain or texture finish including

necessary khili make adhesive etc. of suggested brand by

engineer-in-charge teakwood foot rest of size or size as

directed, necessary teakwood beading of Indian teakwood

including all cost of material, labours 1 mm

lamination in single or double shade & colour as directed on

all visible face and 0.80 mm white lamination on all non

visible faces as directed by engineer-in-charge etc.

33 Providing & fixing Reading table size 0.90 x 0.60 x 0.75m 102.57 5726.70 Sqmt

made of 19 mm thick allproof plywood of BWR confirming to

IS 710 of green or century make, designs & grooves as

directed by architectural drawings. Lamination of 1.0 mm

thick in single or double shade of green, broom or

equivalent make of plain or texture finish as directed on

all visible face including on teak wood batten patti and

0.80 mm white lamination on all non visible faces with all

side decorative border upto 50mm thick for good

appereance. All should be complete with teakwood support &

legs including nails, fevicol, polishing on hidden surface

including labour etc as directed by Engg. in charge complete.

34 Providing & fixing Fix side box for bed side 0.76 x 0.45 x 15.00 2615.90 Nos

0.45m with two drawers using 19mm thick plywood all

proof with using 1mm thick lamination sheet heavy

quality channels including all labour as directed etc.

35 Supplying Matresses of size (1950 x 1950mm) using 23.00 5975.56 Nos

springwel MAGIC, SLEEPWEL, CURION or its equivalent

quality foam of 40 density and 4" thick including madarpat

cover&Pillow as approved by engineer-in-charge etc.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

36 Supplying chadar & bed sheet Double bed of size 23.00 1903.24 Nos

240cm x 240cm & two pillow cover size 41cm x 66cm

Bombay Dyeing Cardinal or its equivalent quality as

approved by engineer-in- charge etc. complete.

37 Providing and fixing double bed size 1.90 x 1.90m using 23.00 10245.84 Nos

Side of bed size 20cm with double 19mm thick plywood

all proof, 12 mm thick plywood Top surface & back of size

1.90 mt x 0.60 mt all proof of good quality including

fixing 1mm thick lamination sheet on all expected surface

on plywood with fixing teakwood bedding including nails,

fevicol, polishing,on hiden surface including labour etc

as directed by Engg. charge complete.

38 Supplying ,Fixing and commissioning of TV Cabinet 22.57 5514.60 Sqmt

Providing and fixing at site TV Cabinet of approved design &

Drawings to be made up of 18.0mm BWP Ply, and finished

with approved shade of Laminated finish, including all

accessories, space for fixing of TV, Necessary shelves, all

accessories etc complete

39 Providing and Fixing dressing unit as per ISI standard 19mm 29.82 3535.00 Sqmt

thick plywood (M1) framing & 1 No. of drawers as reference

image. ISI standard 1mm thick laminate (M24) on outer

faces and 0.8mm thick laminate liner (M25) inside. All

exposed edges shall be covered with 6mm thick teak wood

beading patti (M4). 5mm thick Mirror (M28) with polished

edge to be fixed on ply with SS 304 Studs (M17). Drawers to

be fixed with Telescopic roller channels (M15), handle (M19)

etc. complete with beading patties(M4) and all required

hardware (M14). STOOL: ISI standard 19mm thick plywood

(M1) framing. ISI standard 1mm thick Laminate (M24)

outside. 4 Nylon rollers of desire capacity at bottom. 100 mm

thick PU foam (M22) of required density to be upholstered

350mm (B) x 450mm (H). POLISHING: All exposed wooden

faces to be finished with matt finish melamine polish (M29).

PAINTING: All remaining non-visible faces & edges shall be

painted with Enamel (oil) Paint (M31) of matching shade of

other finished surfaces. HARDWARE: All necessary fixtures

and fasteners of stainless steel or zinc coated (M14).

40 Providing and fixing kitchen platform trolley having 43.66 7530.96 Sqmt

three drawers of SS (IS 304) of required size like thali,

katleri, perforated, partition, cupsosar type in kitchen

platform having drawer front side by using 19mm thick all

proof plywood of ISI quality all side laminated &T.W

Beading etc. as directed. The size of SS (IS 304) basket of

size 4" to 18" for thali, dish, katleri, perforated, partition,

cupsosar type as directed including necessary

S.S.fittings, handles, nobs, telescopic channels , etc. as

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

41 Providing and fixing single bed size 0.90 x 1.90m using Side 100.00 6886.18 Nos

of bed size 20cm with double 19mm thick plywood all

proof, 12mm thick plywood Top surface & back of size

mt x 0.60 mt all proof of good quality including fixing

1mm thick lamination sheet on all expected surface on

plywood with fixing teakwood bedding including nails,

fevicol, polishing,on hiden surface including labour etc

as directed by Engg. charge complete.

42 Supplying Mattresses of size 180.cm x 79.00cm using 100.00 5296.84 Nos

springwel Magic, Sleepwell, Curlon or equivalent quality

foam of 40 density and 4" thick including madarpat cover,

150Gsm Cotton quilt covering Mattress & Pillow size -

0.69 x 0.45m with features like Non-allergic microfibre

polyfill pillow & minimum 660Gsm as approved by engineer-

in-charge etc. Complete.

43 Supplying chadar & bed sheet single bed of size 140cm x 100.00 1026.56 Nos

240cm & pillow cover size 45cm x 69cm Bombay Dyeing

Cardinal or its equivalent quality as approved by engineer -in-

charge etc. complete.

44 Supplying all weather cotton rajai/ blanket of size 100.00 913.44 Nos

140cm x 240cm of Bombay Dyeing or its equivalent as

directed engineer- in-charge etc. complete.

45 Providing and supplying 2-piece unbreakable multipurpose 59.00 1597.82 Nos

toilet set comprising 1 No. bucket (capacity approx. 10 litres)

and 1 No. mug (capacity approx. 1.5 litres), made from

100% virgin high-quality polypropylene (PP) plastic in blue

colour or equivalent approved shade. Both items shall be

lightweight, durable, and resistant to breakage, stains, and

moisture, with smooth, easy-to-clean surfaces and rounded

edges for safe handling. Suitable for daily hostel/ bathroom

use, complete in all respects as per manufacturer’s

specifications and as directed by the Engineer-in-Charge.

46 Providing and placing Library Storage cabinet including 5.00 13263.32 Nos

foloowing : Glass Door cabinet with 4 adjustable shelves

,2 door with 4 glass panels and lock, S.S.keys in duplicate .

All steel parts of the cabinet will be (20/22 swg.) CRCA IS

513 'D' grade 10 tanks antirust treated Standard powder

coating in in-house plant. Overall size: H-1980 x W 915 x D-

485 (mm). as per directed by engineer in charge.

47 Providing and fixing S.S. (304 Grade) plate of size 250 x 100.00 370.47 Nos

25 x 2 mm with 5 hooks (Khinti) incl. spoons, fork and

250ml S.S. Glass with all required material & labour etc.

complete as directed by Engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

48 Providing and Supplying grain storage Container make 10.00 4807.60 Nos

with 0.6mm thick Stainless Steel- 202 GRADE & Surface

Finish with Mirror Polished Buff Finish for 100 Kg Capacity

Container of the desired shape and design as seletced by

Engineer-in-charge.

49 Providing and Supplying grain storage Container make 10.00 3110.80 Nos

with 0.6mm thick Stainless Steel- 202 GRADE & Surface

Finish with Mirror Polished Buff Finish for 50 Kg Capacity

Container of the desired shape and design as seletced by

Engineer-in-charge.

50 Supply of Commercial Alliuminium 30 kg Utensils with lid 6.00 1725.08 Nos

as sample approved by EIC.

51 Deep freezer Color White, Temperature Range 6 TO -23 2.00 42787.64 Nos

Type of Freezer chest type Door Type Top Open Door

Capacity 523L Model Number GFR-550UC Energy

Consumption 189W Refrigerant used R-134 Number Of

Basket 2 Compressor Type RECIP. Phase single

phaseVoltage 190 v to 250v Volume 523 ltrs.Body Material

Pre painted GPSP Sheet Power source Electric Size

LargeType Top Open Hold Over Time 8-12 hr Lock yes I

Deal In New Only Puf Thickness 90 mm Castor Wheels yes

PUF insulated 90 MM Stabilizer Required YES Dimensions:

850(W) X 735(D) X 900(H)mm Temperature: -18 to -23C

Insulation :- 90 mm high density PUF CFC Free

Refrigerant: R-134a Current watts: 189 W No.of baskets :2

nos. No. of doors :- 2 nos.High energy efficiency

compressor Super tropicalised to perform in extreme

temperatures 10 Years warranty on body (Internal Leakage)

5 years warranty on compressor

52 Providing and Supplying Commercial Gas Stove (Chulah / 4.00 5523.08 Nos

Bhattha Stove) ( Large Burner Gas Stove Single 18"x18")

with Guarantee and Warranty Card as per following

specification. Colour - BLUE/Black Material - Cast Iron

Special Feature - Gas Heating Elements - 1 Product

Dimensions - 45D x 45W x 25H Centimeters

Controls Type - Knob Burner type - Open etc .

53 Providing and Supplying 15 Kg Flour Mixing (Atta 2.00 21917.00 Nos

Maker) Machine of Verai company with Guarantee and

Warranty Card as per following specification. Weight:

110 KgCapacity: 15 Kg Name of Manufacturer/ Packer/

Importer: Verai Industries Type of Product: Flour

Mixing Machine Operation Mode: Semi Automatic Color:

Blue Size: 39 x 21 x 36(H) Motor (hp): 1 HP Rotational

Speed: 1440 RPM Rust Proof: Yes Corrosion Resistance:

Yes Duration: 12-15 Min etc. completed

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

54 Commercial Roti Maker Machine Description : The Fully Automatic 2.00 118860.84 Nos

Roti Maker Machine is easy to use design which can be operated

with a minimum training by an unskilled worker. A fellow worker can

be very easily instructed also to use the machine. We offer a wide

range of fully automatic Roti Maker Machine as a reliable company.

This device integrates in the most hygienically and functionally

possible way, the whole process of peda-making, pressing and

baking in one unit. The cost of manufacturing, waste of raw

materials and process time are reduced considerably. Remove the

probability of infestations ofinsects that can occur in completely

covered machines. Minimizing immediate human meal &chapatis

contact. This guarantees that the chapatis and machine surfaces

do not contain any germs. The Fully Automatic Chapati Making

Machine is easy to use design which can be operated with a

minimum training by an unskilled worker. A fellow worker can be

very easily instructed also to use the machine. Features : The most

recent technology which is our own invention is provided in our fully

automatic machine. It is unique and cannot be designed completely

automatically with any other maker.No dry flour sprinkler is required

for our fully automated machine, which prevents wastage of drying

meal. This facilitates the cleaning and maintenance of the whole

scheme. Specifications : Product Type : Roti Maker Machine Brand

: Made In India Production Capacity : 800 to 1000 chapati per hr

Chapati Diameter : 3 to 9 Inch Chapati Thickness : 0.8 to 6 mm

Power Consumption : 4 unit per hr Voltage : 220 V Phase : Single

Frequency : 50 HZ Dimension (L x W x H) : 29 x 22 x 24 inch

Weight : 95 Kg (Approx) Toolsvilla deals with various types of Food

Processing Machinery. Wide ranges of Chapati Making Machine

help make home-like chapatis most hygienically.

55 Provinding & supplying of SS Dining Table size : L 1.80mt x 15.00 9473.80 Nos

W 0.90mt With Stool and our product is made up of good

quality. This Canteen Dining Table boasts of everlasting

shine, wonderful appearance and is perfectly applicable for

dining process. Features:- • High durability • Long life •

Outstanding quality •Number Of Seater 6 Seater •Frame

Material Stainless Steel• Surface Finish SS Finish •Set

Contains With Stools • Shape Rectangular • Color

Silver •Usage/Application Restaurant, Canteen, Mess •

Design Type Customized as approved or directed by the

architect and approved by the Engineer in charge.

56 Provinding & supplying of SS Dining Table size : L 2.40mt x 8.00 11170.60 Nos

W 0.90mt With Stool and our product is made up of good

quality. This Canteen Dining Table boasts of everlasting

shine, wonderful appearance and is perfectly applicable for

dining process. Features:- • High durability • Long life •

Outstanding quality •Number Of Seater 8 Seater •Frame

Material Stainless Steel• Surface Finish SS Finish •Set

Contains With Stools • Shape Rectangular • Color

Silver •Usage/Application Restaurant, Canteen, Mess •

Design Type Customized as approved or directed by the

architect and approved by the Engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

57 Providing and Placing Steel Cupboard with following : 6.00 10605.00 Nos

1. Dimension: Overall size of Almirah• Height: 1980 mm •

Width: 916 mm • Depth: 486 mm 2. Construction & Material:

• CRCA Sheet for shelf & anodized screws. • Welded

construction. • 0.8 thickness High yield strength CRCA

for doors and back. • 0.9 thickness for all other

components. • CRCA ‘D’ grade as per IS:513 3. Locking

& Handle: • Three way locking mechanism with shooting

bolt. 4. Shelving : • Height wise adjustable shelf

mounting. • Maximum uniformly distributed load capacity per

each full shelf is at least 80kg. • 4 Nos. of adjustable shelf

mounting. 5. Finish: • Epoxy powder coated to the thickness

of 40-60 microns after 10 dip tank pre treatment, including

anti rust treatment. • All Dents, Burns and Sharp edges will

be removed from the various components. • The

components will be individually pickled, scrubbed and

rinsed to remove grease, rust scale or any other foreign

element. • The finish will be smooth and uniform. The

finish will be free from all visible defects.• All the edges will

be rounded. • All Almirah will be supply in Prince Grey Color.

as per directed by the Enginneer-in-Charge.

58 Supplying , Fixing and commissioning of Water cooler 4.00 14507.64 Nos

Capacity per unit: 100 liters/hour Filtration: UV or

Reverse Osmosis (RO) Material: Stainless steel body, food-

grade plastic dispensing area Cooling: Air-cooled or

compressor-based Power requirement: 1.5 - 2 kW per unit

Total number of units: 4-6 units of 100 liters/hour capacity,

depending on exact need and peak usage time.

59 GRANITE STONE SHELVES : providing and fixing of 20mm 80.00 1846.68 Sqmt

inserted in wall with 75mm gissi and fix it with cement and

sand and hardwares, adhesives, labour, lead and wastage,

etc. and complete the work satisfactorily as per

instruction of architect or Engineer-in charge. finish the

job satisfactory as directed by engineer in charge.

Description of Item

Item Rate In

(with brief specification and reference to book of Quantity Unit Amount

No. figures

specifications)

60 Providing & fixing 4 seater VIP Dining table size 1.20 x 3.00 7282.10 Nos

0.90 x 0.75m made of 19 mm thick allproof plywood of BWR

confirming to IS 710 of green or century make, designs &

grooves as directed by architectural drawings. lamination

of 1.0 mm thick in single or double shade of green,

broom or equivalent make of plain or texture finish as

directed on all visible face including on teak wood batten

patti and 0.80 mm white lamination on all non visible faces

with all side decorative border upto 50mm thick for

good appereance with 4 teakwood chair including

teakwood support & legs including nails, fevicol,

polishing on hidden surface including labour etc as

directed by Engg. in charge complete.

Total Rs.

Rupees One Crore Fifteen Lakh NinetyFive Thousand One Hundred ThirtySix and Paisa SeventyNine

I / We / am/are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rates mentioned above. Amount of my/our

tender Works out as under.

Estimated Amount Estimated Amount

put to tender Rs. _________ put to tender Rs. _________

Deduct_______% below Add_______% above

Net Rs._________ Net Rs._________

in words ___________ in words ___________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where there is a change as per actual mix design the cost of difference of cement consumption have

been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

R.& B. Sub Division R.& B. Division

Malpur Modasa