Electrical and LAN works at RME division KFRI,Peechi

Amount

Wiring for light point/fan point/exhaust fan point/ call bell point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit , with modular switch, modular plate , suitable GI box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conducter single core cable etc. are required.

Supply and fixing two module stepped type electronic fan regulater on the existing modular plate & switch box including connection but excluding modular plate etc as required

Supplying and drawing following sizes of FRLS PVC insulated copper coductor, single core cable in the existing surface/recesed PVC conduit as required 3X2.5 sq mm

4X2.5 sq.mm

5X2.5 sq.mm

3X4 sq. mm

3X1.5 sq mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

Supplying and fixing suitable size GI box with modular plate and cover in front on recess including providing and fixing 6 pin5/6 A 15/16 A modular switch and 15/16 A modular socket, connection etc. as required.

Supplying and fixing following way SP&N sheet steel MCB distribution board 240 volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)

16 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.single pole

double pole

Supplying and fixing single pole blanking plate in the existing existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A

Supply, conveyance installation testing and commissioning of LED tube light(4 ft) along with driver system wattage mzximum of 20W lumen out put of lamp greater than 1500 lumens, power factor >0.9 rated life of hours 15000 hr,system efficiancy 75 lumen/watt including aii necessary accessories as required complete.25 W LED tube set

Supply, conveyance, installation, testing and commissioning of ceiling fans (BLDC) of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200 mmsweep-BLDC

Supplying and fixing following modular switch/ socket on the existing modularplate and switch box including connections etc. as required.5/6 amps switch

2 way 5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

Supplying and fixing modular blanking plate on existing modular plate and switch board excluding modular plate as required

6 pin 15/16 amp socket outlet

Telephone socket out let

RJ 45 LAN network socket suitable for UTP CAT6

Supplying and fixing following size /modules GI box along with modular base & cover plate for modular switches in recess as required 2 module

3 module

4 module

6 module

8 module

supply and drawing of UTP 4 pair CAT 6 LAN cable in the existing PVC coduit as required

supply, fixing and connecting 24 port network switch 1GBPS as per the instruction from institute officials

Supply and fixing 24 port patch panel loaded suitable for connecting above port switch (including key stone 48 nos )

supply and fixing 4U rack network for above patch pnnel

supply and fixing UV water purifier storage capacity 7 litr including an external filter.

GOSHREE ELECTRICALS PVT LTD